perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Augment the raw_syscalls tracepoints with the contents of the pointer arguments.
|
|
|
|
*
|
|
|
|
* Test it with:
|
|
|
|
*
|
|
|
|
* perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c cat /etc/passwd > /dev/null
|
|
|
|
*
|
|
|
|
* This exactly matches what is marshalled into the raw_syscall:sys_enter
|
|
|
|
* payload expected by the 'perf trace' beautifiers.
|
|
|
|
*
|
|
|
|
* For now it just uses the existing tracepoint augmentation code in 'perf
|
|
|
|
* trace', in the next csets we'll hook up these with the sys_enter/sys_exit
|
|
|
|
* code that will combine entry/exit in a strace like way.
|
|
|
|
*/
|
|
|
|
|
2018-11-07 02:23:40 +08:00
|
|
|
#include <unistd.h>
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
#include <linux/limits.h>
|
perf augmented_raw_syscalls: Augment sockaddr arg in 'connect'
We already had a beautifier for an augmented sockaddr payload, but that
was when we were hooking on each syscalls:sys_enter_foo tracepoints,
since now we're almost doing that by doing a tail call from
raw_syscalls:sys_enter, its almost the same, we can reuse it straight
away.
# perf trace -e connec* ssh www.bla.com
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(4<socket:[16604782]>, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 0x6e) = 0
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_INET, port: 53, addr: 192.168.44.1 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET, port: 22, addr: 146.112.61.108 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET6, port: 22, addr: ::ffff:146.112.61.108 }, 0x1c) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5xkrbcpjsgnr3zt1aqdd7nvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 03:28:14 +08:00
|
|
|
#include <linux/socket.h>
|
2018-11-07 03:09:06 +08:00
|
|
|
#include <pid_filter.h>
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
|
|
|
|
/* bpf-output associated map */
|
2019-01-24 22:17:23 +08:00
|
|
|
bpf_map(__augmented_syscalls__, PERF_EVENT_ARRAY, int, u32, __NR_CPUS__);
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
|
perf augmented_raw_syscalls: Tell which args are filenames and how many bytes to copy
Since we know what args are strings from reading the syscall
descriptions in tracefs and also already mark such args to be beautified
using the syscall_arg__scnprintf_filename() helper, all we need is to
fill in this info in the 'syscalls' BPF map we were using to state which
syscalls the user is interested in, i.e. the syscall filter.
Right now just set that with PATH_MAX and unroll the syscall arg in the
BPF program, as the verifier isn't liking something clang generates when
unrolling the loop.
This also makes the augmented_raw_syscalls.c program support all arches,
since we removed that set of defines with the hard coded syscall
numbers, all should be automatically set for all arches, with the
syscall id mapping done correcly.
Doing baby steps here, i.e. just the first string arg for a syscall is
printed, syscalls with more than one, say, the various rename* syscalls,
need further work, but lets get first something that the BPF verifier
accepts before increasing the complexity
To test it, something like:
# perf trace -e string -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
With:
# cat ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
[trace]
#add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = 40
show_prefix = yes
#
That commented add_events line is needed for developing this
augmented_raw_syscalls.c BPF program, as if we add it via the
'add_events' mechanism so as to shorten the 'perf trace' command lines,
then we end up not setting up the -v option which precludes us having
access to the bpf verifier log :-\
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-dn863ya0cbsqycxuy0olvbt1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-04 03:52:46 +08:00
|
|
|
/*
|
|
|
|
* string_args_len: one per syscall arg, 0 means not a string or don't copy it,
|
|
|
|
* PATH_MAX for copying everything, any other value to limit
|
|
|
|
* it a la 'strace -s strsize'.
|
|
|
|
*/
|
perf augmented_syscalls: Switch to using a struct for the syscalls map values
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Run it with the .c file once to cache the .o file:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.c
LLVM: dumping augmented_raw_syscalls.o
0.000 ( 0.021 ms): tmux: server/4952 openat(dfd: CWD, filename: /proc/5691/cmdline ) = 11
349.807 ( 0.040 ms): DNS Res~er #39/11082 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
4988.759 ( 0.052 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
4988.976 ( 0.029 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
^C[root@quaco bpf]#
From now on, we can use just the newly built .o file, skipping the
compilation step for a faster startup:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.o
0.000 ( 0.046 ms): DNS Res~er #39/11088 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
1946.408 ( 0.190 ms): systemd/1 openat(dfd: CWD, filename: /proc/1071/cgroup, flags: CLOEXEC ) = 20
1946.792 ( 0.215 ms): systemd/1 openat(dfd: CWD, filename: /proc/954/cgroup, flags: CLOEXEC ) = 20
^C#
Now on to do the same in the builtin-trace.c side of things.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-k8mwu04l8es29rje5loq9vg7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-13 03:46:13 +08:00
|
|
|
struct syscall {
|
|
|
|
bool enabled;
|
perf augmented_raw_syscalls: Tell which args are filenames and how many bytes to copy
Since we know what args are strings from reading the syscall
descriptions in tracefs and also already mark such args to be beautified
using the syscall_arg__scnprintf_filename() helper, all we need is to
fill in this info in the 'syscalls' BPF map we were using to state which
syscalls the user is interested in, i.e. the syscall filter.
Right now just set that with PATH_MAX and unroll the syscall arg in the
BPF program, as the verifier isn't liking something clang generates when
unrolling the loop.
This also makes the augmented_raw_syscalls.c program support all arches,
since we removed that set of defines with the hard coded syscall
numbers, all should be automatically set for all arches, with the
syscall id mapping done correcly.
Doing baby steps here, i.e. just the first string arg for a syscall is
printed, syscalls with more than one, say, the various rename* syscalls,
need further work, but lets get first something that the BPF verifier
accepts before increasing the complexity
To test it, something like:
# perf trace -e string -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
With:
# cat ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
[trace]
#add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = 40
show_prefix = yes
#
That commented add_events line is needed for developing this
augmented_raw_syscalls.c BPF program, as if we add it via the
'add_events' mechanism so as to shorten the 'perf trace' command lines,
then we end up not setting up the -v option which precludes us having
access to the bpf verifier log :-\
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-dn863ya0cbsqycxuy0olvbt1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-04 03:52:46 +08:00
|
|
|
u16 string_args_len[6];
|
perf augmented_syscalls: Switch to using a struct for the syscalls map values
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Run it with the .c file once to cache the .o file:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.c
LLVM: dumping augmented_raw_syscalls.o
0.000 ( 0.021 ms): tmux: server/4952 openat(dfd: CWD, filename: /proc/5691/cmdline ) = 11
349.807 ( 0.040 ms): DNS Res~er #39/11082 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
4988.759 ( 0.052 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
4988.976 ( 0.029 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
^C[root@quaco bpf]#
From now on, we can use just the newly built .o file, skipping the
compilation step for a faster startup:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.o
0.000 ( 0.046 ms): DNS Res~er #39/11088 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
1946.408 ( 0.190 ms): systemd/1 openat(dfd: CWD, filename: /proc/1071/cgroup, flags: CLOEXEC ) = 20
1946.792 ( 0.215 ms): systemd/1 openat(dfd: CWD, filename: /proc/954/cgroup, flags: CLOEXEC ) = 20
^C#
Now on to do the same in the builtin-trace.c side of things.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-k8mwu04l8es29rje5loq9vg7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-13 03:46:13 +08:00
|
|
|
};
|
|
|
|
|
2019-01-24 22:17:23 +08:00
|
|
|
bpf_map(syscalls, ARRAY, int, struct syscall, 512);
|
perf trace: Implement syscall filtering in augmented_syscalls
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with
one bool per syscall, stating if it should be filtered or not.
So, with a pre-built augmented_raw_syscalls.o file, we use:
# perf trace -e open*,augmented_raw_syscalls.o
0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138
187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11
187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167
^C#
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-13 00:39:24 +08:00
|
|
|
|
2019-07-16 22:27:03 +08:00
|
|
|
/*
|
|
|
|
* What to augment at entry?
|
|
|
|
*
|
|
|
|
* Pointer arg payloads (filenames, etc) passed from userspace to the kernel
|
|
|
|
*/
|
|
|
|
bpf_map(syscalls_sys_enter, PROG_ARRAY, u32, u32, 512);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* What to augment at exit?
|
|
|
|
*
|
|
|
|
* Pointer arg payloads returned from the kernel (struct stat, etc) to userspace.
|
|
|
|
*/
|
|
|
|
bpf_map(syscalls_sys_exit, PROG_ARRAY, u32, u32, 512);
|
|
|
|
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
struct syscall_enter_args {
|
|
|
|
unsigned long long common_tp_fields;
|
|
|
|
long syscall_nr;
|
|
|
|
unsigned long args[6];
|
|
|
|
};
|
|
|
|
|
|
|
|
struct syscall_exit_args {
|
|
|
|
unsigned long long common_tp_fields;
|
|
|
|
long syscall_nr;
|
|
|
|
long ret;
|
|
|
|
};
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
struct augmented_arg {
|
perf augmented_syscalls: Start collecting pathnames in the BPF program
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-05 23:23:40 +08:00
|
|
|
unsigned int size;
|
2019-06-05 02:57:28 +08:00
|
|
|
int err;
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
char value[PATH_MAX];
|
perf augmented_syscalls: Start collecting pathnames in the BPF program
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-05 23:23:40 +08:00
|
|
|
};
|
|
|
|
|
2018-11-07 03:09:06 +08:00
|
|
|
pid_filter(pids_filtered);
|
|
|
|
|
2019-07-17 02:33:20 +08:00
|
|
|
struct augmented_args_payload {
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
struct syscall_enter_args args;
|
perf augmented_raw_syscalls: Augment sockaddr arg in 'connect'
We already had a beautifier for an augmented sockaddr payload, but that
was when we were hooking on each syscalls:sys_enter_foo tracepoints,
since now we're almost doing that by doing a tail call from
raw_syscalls:sys_enter, its almost the same, we can reuse it straight
away.
# perf trace -e connec* ssh www.bla.com
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(4<socket:[16604782]>, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 0x6e) = 0
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_INET, port: 53, addr: 192.168.44.1 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET, port: 22, addr: 146.112.61.108 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET6, port: 22, addr: ::ffff:146.112.61.108 }, 0x1c) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5xkrbcpjsgnr3zt1aqdd7nvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 03:28:14 +08:00
|
|
|
union {
|
|
|
|
struct {
|
2019-08-23 21:37:47 +08:00
|
|
|
struct augmented_arg arg, arg2;
|
perf augmented_raw_syscalls: Augment sockaddr arg in 'connect'
We already had a beautifier for an augmented sockaddr payload, but that
was when we were hooking on each syscalls:sys_enter_foo tracepoints,
since now we're almost doing that by doing a tail call from
raw_syscalls:sys_enter, its almost the same, we can reuse it straight
away.
# perf trace -e connec* ssh www.bla.com
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(4<socket:[16604782]>, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 0x6e) = 0
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_INET, port: 53, addr: 192.168.44.1 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET, port: 22, addr: 146.112.61.108 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET6, port: 22, addr: ::ffff:146.112.61.108 }, 0x1c) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5xkrbcpjsgnr3zt1aqdd7nvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 03:28:14 +08:00
|
|
|
};
|
|
|
|
struct sockaddr_storage saddr;
|
|
|
|
};
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
};
|
|
|
|
|
2019-07-17 02:33:20 +08:00
|
|
|
bpf_map(augmented_args_tmp, PERCPU_ARRAY, int, struct augmented_args_payload, 1);
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
|
2019-06-05 02:31:28 +08:00
|
|
|
static inline
|
2019-08-23 21:37:47 +08:00
|
|
|
unsigned int augmented_arg__read_str(struct augmented_arg *augmented_arg, const void *arg, unsigned int arg_len)
|
2019-06-05 02:31:28 +08:00
|
|
|
{
|
2019-08-23 21:37:47 +08:00
|
|
|
unsigned int augmented_len = sizeof(*augmented_arg);
|
|
|
|
int string_len = probe_read_str(&augmented_arg->value, arg_len, arg);
|
2019-06-05 02:31:28 +08:00
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
augmented_arg->size = augmented_arg->err = 0;
|
2019-06-05 02:57:28 +08:00
|
|
|
/*
|
|
|
|
* probe_read_str may return < 0, e.g. -EFAULT
|
2019-08-23 21:37:47 +08:00
|
|
|
* So we leave that in the augmented_arg->size that userspace will
|
2019-06-05 02:57:28 +08:00
|
|
|
*/
|
2019-08-23 21:37:47 +08:00
|
|
|
if (string_len > 0) {
|
|
|
|
augmented_len -= sizeof(augmented_arg->value) - string_len;
|
|
|
|
augmented_len &= sizeof(augmented_arg->value) - 1;
|
|
|
|
augmented_arg->size = string_len;
|
2019-06-05 02:57:28 +08:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* So that username notice the error while still being able
|
|
|
|
* to skip this augmented arg record
|
|
|
|
*/
|
2019-08-23 21:37:47 +08:00
|
|
|
augmented_arg->err = string_len;
|
|
|
|
augmented_len = offsetof(struct augmented_arg, value);
|
2019-06-05 02:31:28 +08:00
|
|
|
}
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
return augmented_len;
|
2019-06-05 02:31:28 +08:00
|
|
|
}
|
|
|
|
|
perf trace: Add BPF handler for unaugmented syscalls
Will be used to assign to syscalls that don't need augmentation, i.e.
those with just integer args.
All syscalls will be in a BPF_MAP_TYPE_PROG_ARRAY, and the
bpf_tail_call() keyed by the syscall id will either find nothing in
place, which means the syscall is being filtered, or a function that
will either add things like filenames to the ring buffer, right after
the raw syscall args, or be this unaugmented handler that will just
return 1, meaning don't filter the original
raw_syscalls:sys_{enter,exit} tracepoint.
For now it is not really being used, this is just leg work to break the
patch into smaller pieces.
It introduces a trace__find_bpf_program_by_title() helper that in turn
uses libbpf's bpf_object__find_program_by_title() on the BPF object with
the __augmented_syscalls__ map. "title" is how libbpf calls the SEC()
argument for functions, i.e. the ELF section that follows a convention
to specify what BPF program (a function with this SEC() marking) should
be connected to which tracepoint, kprobes, etc.
In perf anything that is of the form SEC("sys:event_name") will be
connected to that tracepoint by perf's BPF loader.
In this case its something that will be bpf_tail_call()ed from either
the "raw_syscalls:sys_enter" or "raw_syscall:sys_exit" tracepoints, so
its named "!raw_syscalls:unaugmented" to convey that idea, i.e. its not
going to be directly attached to a tracepoint, thus it starts with a
"!".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-meucpjx2u0slpkayx56lxqq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-16 04:51:43 +08:00
|
|
|
SEC("!raw_syscalls:unaugmented")
|
|
|
|
int syscall_unaugmented(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2019-07-16 21:59:19 +08:00
|
|
|
/*
|
perf augmented_raw_syscalls: Augment sockaddr arg in 'connect'
We already had a beautifier for an augmented sockaddr payload, but that
was when we were hooking on each syscalls:sys_enter_foo tracepoints,
since now we're almost doing that by doing a tail call from
raw_syscalls:sys_enter, its almost the same, we can reuse it straight
away.
# perf trace -e connec* ssh www.bla.com
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(4<socket:[16604782]>, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 0x6e) = 0
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_INET, port: 53, addr: 192.168.44.1 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET, port: 22, addr: 146.112.61.108 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET6, port: 22, addr: ::ffff:146.112.61.108 }, 0x1c) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5xkrbcpjsgnr3zt1aqdd7nvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 03:28:14 +08:00
|
|
|
* These will be tail_called from SEC("raw_syscalls:sys_enter"), so will find in
|
2019-07-17 02:33:20 +08:00
|
|
|
* augmented_args_tmp what was read by that raw_syscalls:sys_enter and go
|
2019-07-16 21:59:19 +08:00
|
|
|
* on from there, reading the first syscall arg as a string, i.e. open's
|
|
|
|
* filename.
|
|
|
|
*/
|
perf augmented_raw_syscalls: Augment sockaddr arg in 'connect'
We already had a beautifier for an augmented sockaddr payload, but that
was when we were hooking on each syscalls:sys_enter_foo tracepoints,
since now we're almost doing that by doing a tail call from
raw_syscalls:sys_enter, its almost the same, we can reuse it straight
away.
# perf trace -e connec* ssh www.bla.com
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(3</var/lib/sss/mc/passwd>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(4<socket:[16604782]>, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 0x6e) = 0
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 0x6e) = -1 ENOENT (No such file or directory)
connect(5</etc/hosts>, { .family: PF_INET, port: 53, addr: 192.168.44.1 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET, port: 22, addr: 146.112.61.108 }, 0x10) = 0
connect(5</etc/hosts>, { .family: PF_INET6, port: 22, addr: ::ffff:146.112.61.108 }, 0x1c) = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5xkrbcpjsgnr3zt1aqdd7nvc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 03:28:14 +08:00
|
|
|
SEC("!syscalls:sys_enter_connect")
|
|
|
|
int sys_enter_connect(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
|
|
|
const void *sockaddr_arg = (const void *)args->args[1];
|
|
|
|
unsigned int socklen = args->args[2];
|
|
|
|
unsigned int len = sizeof(augmented_args->args);
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
|
|
|
if (socklen > sizeof(augmented_args->saddr))
|
|
|
|
socklen = sizeof(augmented_args->saddr);
|
|
|
|
|
|
|
|
probe_read(&augmented_args->saddr, socklen, sockaddr_arg);
|
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len + socklen);
|
|
|
|
}
|
|
|
|
|
perf trace beauty: Beautify 'sendto's sockaddr arg
By just writing the collector in the augmented_raw_syscalls.c BPF
program:
# perf trace -e sendto
<SNIP>
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
Socket Thread/3573 sendto(247, 0x7fb32d49c000, 120, NONE, { .family: PF_UNSPEC }, NULL) = 120
DNS Res~er #18/11374 sendto(242, 0x7fb342cfe420, 20, NONE, { .family: PF_NETLINK }, 0xc) = 20
DNS Res~er #18/11374 sendto(242, 0x7fb342cfcca0, 42, MSG_NOSIGNAL, { .family: PF_UNSPEC }, NULL) = 42
DNS Res~er #18/11374 sendto(242, 0x7fb342cfcccc, 42, MSG_NOSIGNAL, { .family: PF_UNSPEC }, NULL) = 42
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
Socket Thread/3573 sendto(242, 0x7fb308bb1c08, 296, NONE, { .family: PF_UNSPEC }, NULL) = 296
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
ping/23492 sendto(3, 0x56253bbef700, 64, NONE, { .family: PF_INET, port: 0, addr: 10.10.161.32 }, 0x10) = 64
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p0l0rlvq19v5zf8qc2x2itow@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 04:33:39 +08:00
|
|
|
SEC("!syscalls:sys_enter_sendto")
|
|
|
|
int sys_enter_sendto(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
|
|
|
const void *sockaddr_arg = (const void *)args->args[4];
|
|
|
|
unsigned int socklen = args->args[5];
|
|
|
|
unsigned int len = sizeof(augmented_args->args);
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
|
|
|
if (socklen > sizeof(augmented_args->saddr))
|
|
|
|
socklen = sizeof(augmented_args->saddr);
|
|
|
|
|
|
|
|
probe_read(&augmented_args->saddr, socklen, sockaddr_arg);
|
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len + socklen);
|
|
|
|
}
|
|
|
|
|
2019-07-16 21:59:19 +08:00
|
|
|
SEC("!syscalls:sys_enter_open")
|
|
|
|
int sys_enter_open(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
2019-07-17 02:33:20 +08:00
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
2019-07-16 21:59:19 +08:00
|
|
|
const void *filename_arg = (const void *)args->args[0];
|
|
|
|
unsigned int len = sizeof(augmented_args->args);
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
len += augmented_arg__read_str(&augmented_args->arg, filename_arg, sizeof(augmented_args->arg.value));
|
2019-07-16 21:59:19 +08:00
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len);
|
|
|
|
}
|
|
|
|
|
2019-07-16 23:31:10 +08:00
|
|
|
SEC("!syscalls:sys_enter_openat")
|
|
|
|
int sys_enter_openat(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
2019-07-17 02:33:20 +08:00
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
2019-07-16 23:31:10 +08:00
|
|
|
const void *filename_arg = (const void *)args->args[1];
|
|
|
|
unsigned int len = sizeof(augmented_args->args);
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
len += augmented_arg__read_str(&augmented_args->arg, filename_arg, sizeof(augmented_args->arg.value));
|
2019-07-16 23:31:10 +08:00
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len);
|
|
|
|
}
|
|
|
|
|
perf trace beauty: Add BPF augmenter for the 'rename' syscall
I.e. two strings:
# perf trace -e rename
systemd/1 rename("/run/systemd/units/.#invocation:dnf-makecache.service970761b7f2840dcc", "/run/systemd/units/invocation:dnf-makecache.service") = 0
systemd-journa/715 rename("/run/systemd/journal/streams/.#9:17539785BJDblc", "/run/systemd/journal/streams/9:17539785") = 0
mv/1936 rename("/tmp/build/perf/fd/.array.o.tmp", "/tmp/build/perf/fd/.array.o.cmd") = 0
sh/1949 rename("/tmp/build/perf/.cpu.o.tmp", "/tmp/build/perf/.cpu.o.cmd") = 0
mv/1954 rename("/tmp/build/perf/fs/.tracing_path.o.tmp", "/tmp/build/perf/fs/.tracing_path.o.cmd") = 0
mv/1963 rename("/tmp/build/perf/common-cmds.h+", "/tmp/build/perf/common-cmds.h") = 0
:1975/1975 rename("/tmp/build/perf/.exec-cmd.o.tmp", "/tmp/build/perf/.exec-cmd.o.cmd") = 0
mv/1979 rename("/tmp/build/perf/fs/.fs.o.tmp", "/tmp/build/perf/fs/.fs.o.cmd") = 0
mv/2005 rename("/tmp/build/perf/.debug.o.tmp", "/tmp/build/perf/.debug.o.cmd") = 0
mv/2012 rename("/tmp/build/perf/.str_error_r.o.tmp", "/tmp/build/perf/.str_error_r.o.cmd") = 0
mv/2019 rename("/tmp/build/perf/.help.o.tmp", "/tmp/build/perf/.help.o.cmd") = 0
mv/2031 rename("/tmp/build/perf/.trace-seq.o.tmp", "/tmp/build/perf/.trace-seq.o.cmd") = 0
make/2038 ... [continued]: rename()) = 0
:2038/2038 rename("/tmp/build/perf/.event-plugin.o.tmp", "/tmp/build/perf/.event-plugin.o.cmd") ...
ar/2035 rename("/tmp/build/perf/stzwBX3a", "/tmp/build/perf/libapi.a") = 0
mv/2051 rename("/tmp/build/perf/.parse-utils.o.tmp", "/tmp/build/perf/.parse-utils.o.cmd") = 0
mv/2069 rename("/tmp/build/perf/.subcmd-config.o.tmp", "/tmp/build/perf/.subcmd-config.o.cmd") = 0
make/2080 rename("/tmp/build/perf/.parse-filter.o.tmp", "/tmp/build/perf/.parse-filter.o.cmd") = 0
mv/2099 rename("/tmp/build/perf/.pager.o.tmp", "/tmp/build/perf/.pager.o.cmd") = 0
:2124/2124 rename("/tmp/build/perf/.sigchain.o.tmp", "/tmp/build/perf/.sigchain.o.cmd") = 0
make/2140 rename("/tmp/build/perf/.event-parse.o.tmp", "/tmp/build/perf/.event-parse.o.cmd") = 0
mv/2164 rename("/tmp/build/perf/.kbuffer-parse.o.tmp", "/tmp/build/perf/.kbuffer-parse.o.cmd") = 0
sh/2174 rename("/tmp/build/perf/.run-command.o.tmp", "/tmp/build/perf/.run-command.o.cmd") = 0
mv/2190 rename("/tmp/build/perf/.tep_strerror.o.tmp", "/tmp/build/perf/.tep_strerror.o.cmd") = 0
:2261/2261 rename("/tmp/build/perf/.event-parse-api.o.tmp", "/tmp/build/perf/.event-parse-api.o.cmd") = 0
:2480/2480 rename("/tmp/build/perf/stLv3kG2", "/tmp/build/perf/libtraceevent.a") = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6hh2rl27uri6gsxhmk6q3hx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 22:47:37 +08:00
|
|
|
SEC("!syscalls:sys_enter_rename")
|
|
|
|
int sys_enter_rename(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
|
|
|
const void *oldpath_arg = (const void *)args->args[0],
|
|
|
|
*newpath_arg = (const void *)args->args[1];
|
|
|
|
unsigned int len = sizeof(augmented_args->args), oldpath_len;
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
oldpath_len = augmented_arg__read_str(&augmented_args->arg, oldpath_arg, sizeof(augmented_args->arg.value));
|
|
|
|
len += oldpath_len + augmented_arg__read_str((void *)(&augmented_args->arg) + oldpath_len, newpath_arg, sizeof(augmented_args->arg.value));
|
perf trace beauty: Add BPF augmenter for the 'rename' syscall
I.e. two strings:
# perf trace -e rename
systemd/1 rename("/run/systemd/units/.#invocation:dnf-makecache.service970761b7f2840dcc", "/run/systemd/units/invocation:dnf-makecache.service") = 0
systemd-journa/715 rename("/run/systemd/journal/streams/.#9:17539785BJDblc", "/run/systemd/journal/streams/9:17539785") = 0
mv/1936 rename("/tmp/build/perf/fd/.array.o.tmp", "/tmp/build/perf/fd/.array.o.cmd") = 0
sh/1949 rename("/tmp/build/perf/.cpu.o.tmp", "/tmp/build/perf/.cpu.o.cmd") = 0
mv/1954 rename("/tmp/build/perf/fs/.tracing_path.o.tmp", "/tmp/build/perf/fs/.tracing_path.o.cmd") = 0
mv/1963 rename("/tmp/build/perf/common-cmds.h+", "/tmp/build/perf/common-cmds.h") = 0
:1975/1975 rename("/tmp/build/perf/.exec-cmd.o.tmp", "/tmp/build/perf/.exec-cmd.o.cmd") = 0
mv/1979 rename("/tmp/build/perf/fs/.fs.o.tmp", "/tmp/build/perf/fs/.fs.o.cmd") = 0
mv/2005 rename("/tmp/build/perf/.debug.o.tmp", "/tmp/build/perf/.debug.o.cmd") = 0
mv/2012 rename("/tmp/build/perf/.str_error_r.o.tmp", "/tmp/build/perf/.str_error_r.o.cmd") = 0
mv/2019 rename("/tmp/build/perf/.help.o.tmp", "/tmp/build/perf/.help.o.cmd") = 0
mv/2031 rename("/tmp/build/perf/.trace-seq.o.tmp", "/tmp/build/perf/.trace-seq.o.cmd") = 0
make/2038 ... [continued]: rename()) = 0
:2038/2038 rename("/tmp/build/perf/.event-plugin.o.tmp", "/tmp/build/perf/.event-plugin.o.cmd") ...
ar/2035 rename("/tmp/build/perf/stzwBX3a", "/tmp/build/perf/libapi.a") = 0
mv/2051 rename("/tmp/build/perf/.parse-utils.o.tmp", "/tmp/build/perf/.parse-utils.o.cmd") = 0
mv/2069 rename("/tmp/build/perf/.subcmd-config.o.tmp", "/tmp/build/perf/.subcmd-config.o.cmd") = 0
make/2080 rename("/tmp/build/perf/.parse-filter.o.tmp", "/tmp/build/perf/.parse-filter.o.cmd") = 0
mv/2099 rename("/tmp/build/perf/.pager.o.tmp", "/tmp/build/perf/.pager.o.cmd") = 0
:2124/2124 rename("/tmp/build/perf/.sigchain.o.tmp", "/tmp/build/perf/.sigchain.o.cmd") = 0
make/2140 rename("/tmp/build/perf/.event-parse.o.tmp", "/tmp/build/perf/.event-parse.o.cmd") = 0
mv/2164 rename("/tmp/build/perf/.kbuffer-parse.o.tmp", "/tmp/build/perf/.kbuffer-parse.o.cmd") = 0
sh/2174 rename("/tmp/build/perf/.run-command.o.tmp", "/tmp/build/perf/.run-command.o.cmd") = 0
mv/2190 rename("/tmp/build/perf/.tep_strerror.o.tmp", "/tmp/build/perf/.tep_strerror.o.cmd") = 0
:2261/2261 rename("/tmp/build/perf/.event-parse-api.o.tmp", "/tmp/build/perf/.event-parse-api.o.cmd") = 0
:2480/2480 rename("/tmp/build/perf/stLv3kG2", "/tmp/build/perf/libtraceevent.a") = 0
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6hh2rl27uri6gsxhmk6q3hx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-17 22:47:37 +08:00
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len);
|
|
|
|
}
|
|
|
|
|
2019-07-17 01:55:57 +08:00
|
|
|
SEC("!syscalls:sys_enter_renameat")
|
|
|
|
int sys_enter_renameat(struct syscall_enter_args *args)
|
|
|
|
{
|
|
|
|
int key = 0;
|
2019-07-17 02:33:20 +08:00
|
|
|
struct augmented_args_payload *augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
2019-07-17 01:55:57 +08:00
|
|
|
const void *oldpath_arg = (const void *)args->args[1],
|
|
|
|
*newpath_arg = (const void *)args->args[3];
|
|
|
|
unsigned int len = sizeof(augmented_args->args), oldpath_len;
|
|
|
|
|
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1; /* Failure: don't filter */
|
|
|
|
|
2019-08-23 21:37:47 +08:00
|
|
|
oldpath_len = augmented_arg__read_str(&augmented_args->arg, oldpath_arg, sizeof(augmented_args->arg.value));
|
|
|
|
len += oldpath_len + augmented_arg__read_str((void *)(&augmented_args->arg) + oldpath_len, newpath_arg, sizeof(augmented_args->arg.value));
|
2019-07-17 01:55:57 +08:00
|
|
|
|
|
|
|
/* If perf_event_output fails, return non-zero so that it gets recorded unaugmented */
|
|
|
|
return perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU, augmented_args, len);
|
|
|
|
}
|
|
|
|
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
SEC("raw_syscalls:sys_enter")
|
|
|
|
int sys_enter(struct syscall_enter_args *args)
|
|
|
|
{
|
2019-07-17 02:33:20 +08:00
|
|
|
struct augmented_args_payload *augmented_args;
|
2019-06-05 02:57:28 +08:00
|
|
|
/*
|
|
|
|
* We start len, the amount of data that will be in the perf ring
|
|
|
|
* buffer, if this is not filtered out by one of pid_filter__has(),
|
|
|
|
* syscall->enabled, etc, with the non-augmented raw syscall payload,
|
|
|
|
* i.e. sizeof(augmented_args->args).
|
|
|
|
*
|
|
|
|
* We'll add to this as we add augmented syscalls right after that
|
|
|
|
* initial, non-augmented raw_syscalls:sys_enter payload.
|
|
|
|
*/
|
|
|
|
unsigned int len = sizeof(augmented_args->args);
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
struct syscall *syscall;
|
|
|
|
int key = 0;
|
|
|
|
|
2019-08-24 02:38:08 +08:00
|
|
|
if (pid_filter__has(&pids_filtered, getpid()))
|
|
|
|
return 0;
|
|
|
|
|
2019-07-17 02:33:20 +08:00
|
|
|
augmented_args = bpf_map_lookup_elem(&augmented_args_tmp, &key);
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
if (augmented_args == NULL)
|
|
|
|
return 1;
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
|
perf augmented_raw_syscalls: Use a PERCPU_ARRAY map to copy more string bytes
The previous method, copying to the BPF stack limited us in how many
bytes we could copy from strings, use a PERCPU_ARRAY map like devised by
the sysdig guys[1] to copy more bytes:
Before:
# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
touch: cannot touch 'aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa': File name too long
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOCK|O_WRONLY, S_IRUGO|S_IWUGO) = -1 ENAMETOOLONG (File name too long)
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
<SNIP some openat calls>
#
After:
[root@quaco acme]# trace --no-inherit -e openat touch `python -c "print "$s" 'a' * 2000"`
<STRIP what is the same as in the 'before' part>
openat(AT_FDCWD, "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa", O_CREAT|O_NOCTTY|O_NONBLOC) = -1 ENAMETOOLONG (File name too long)
<STRIP what is the same as in the 'before' part>
If we leave something like 'perf trace -e string' to trace all syscalls
with a string, and then do some 'perf top', to get some annotation for
the augmented_raw_syscalls.o BPF program we get:
│ → callq *ffffffffc45576d1 ▒
│ augmented_args->filename.size = probe_read_str(&augmented_args->filename.value, ▒
0.05 │ mov %eax,0x40(%r13)
Looking with pahole, expanding types, asking for hex offsets and sizes,
and use of BTF type information to see what is at that 0x40 offset from
%r13:
# pahole -F btf -C augmented_args_filename --expand_types --hex /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct augmented_args_filename {
struct syscall_enter_args {
long long unsigned int common_tp_fields; /* 0 0x8 */
long int syscall_nr; /* 0x8 0x8 */
long unsigned int args[6]; /* 0x10 0x30 */
} args; /* 0 0x40 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct augmented_filename {
unsigned int size; /* 0x40 0x4 */
int reserved; /* 0x44 0x4 */
char value[4096]; /* 0x48 0x1000 */
} filename; /* 0x40 0x1008 */
/* size: 4168, cachelines: 66, members: 2 */
/* last cacheline: 8 bytes */
};
#
Then looking if PATH_MAX leaves some signature in the tests:
│ if (augmented_args->filename.size < sizeof(augmented_args->filename.value)) { ▒
│ cmp $0xfff,%rdi
0xfff == 4095
sizeof(augmented_args->filename.value) == PATH_MAX == 4096
[1] https://sysdig.com/blog/the-art-of-writing-ebpf-programs-a-primer/
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <borkmann@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
cc: Martin Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-76gce2d2ghzq537ubwhjkone@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-23 01:48:26 +08:00
|
|
|
probe_read(&augmented_args->args, sizeof(augmented_args->args), args);
|
perf trace: Implement syscall filtering in augmented_syscalls
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with
one bool per syscall, stating if it should be filtered or not.
So, with a pre-built augmented_raw_syscalls.o file, we use:
# perf trace -e open*,augmented_raw_syscalls.o
0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138
187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11
187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167
^C#
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-13 00:39:24 +08:00
|
|
|
|
perf augmented_syscalls: Start collecting pathnames in the BPF program
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-05 23:23:40 +08:00
|
|
|
/*
|
perf augmented_raw_syscalls: Switch to using BPF_MAP_TYPE_PROG_ARRAY
Trying to control what arguments to copy, which ones were strings, etc
all from userspace via maps went nowhere, lots of difficulties to get
the verifier satisfied, so use what the fine BPF guys designed for such
a syscall handling mechanism: bpf_tail_call + BPF_MAP_TYPE_PROG_ARRAY.
The series leading to this should have explained it thoroughly, but the
end result, explained via gdb should help understand this:
Breakpoint 1, syscall_arg__scnprintf_filename (bf=0xc002b1 "", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1268
1268 {
(gdb) n
1269 unsigned long ptr = arg->val;
(gdb) n
1271 if (arg->augmented.args)
(gdb) n
1272 return syscall_arg__scnprintf_augmented_string(arg, bf, size);
(gdb) s
syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "", size=2031) at builtin-trace.c:1251
1251 {
(gdb) n
1252 struct augmented_arg *augmented_arg = arg->augmented.args;
(gdb) n
1253 size_t printed = scnprintf(bf, size, "\"%.*s\"", augmented_arg->size, augmented_arg->value);
(gdb) n
1258 int consumed = sizeof(*augmented_arg) + augmented_arg->size;
(gdb) p bf
$1 = 0xc002b1 "\"/etc/ld.so.cache\""
(gdb) bt
#0 syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031) at builtin-trace.c:1258
#1 0x0000000000492634 in syscall_arg__scnprintf_filename (bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1272
#2 0x0000000000493cd7 in syscall__scnprintf_val (sc=0xc0de68, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970, val=140737354091036) at builtin-trace.c:1689
#3 0x000000000049404f in syscall__scnprintf_args (sc=0xc0de68, bf=0xc002a7 "AT_FDCWD, \"/etc/ld.so.cache\"", size=2041, args=0x7ffff6cbf1ec "\234\377\377\377", augmented_args=0x7ffff6cbf21c, augmented_args_size=28, trace=0x7fffffffa170,
thread=0xbff940) at builtin-trace.c:1756
#4 0x0000000000494a97 in trace__sys_enter (trace=0x7fffffffa170, evsel=0xbe1900, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:1975
#5 0x0000000000496ff1 in trace__handle_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:2685
#6 0x0000000000497edb in __trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3029
#7 0x000000000049801e in trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3056
#8 0x00000000004988de in trace__run (trace=0x7fffffffa170, argc=2, argv=0x7fffffffd660) at builtin-trace.c:3258
#9 0x000000000049c2d3 in cmd_trace (argc=2, argv=0x7fffffffd660) at builtin-trace.c:4220
#10 0x00000000004dcb6c in run_builtin (p=0xa18e00 <commands+576>, argc=5, argv=0x7fffffffd660) at perf.c:304
#11 0x00000000004dcdd9 in handle_internal_command (argc=5, argv=0x7fffffffd660) at perf.c:356
#12 0x00000000004dcf20 in run_argv (argcp=0x7fffffffd4bc, argv=0x7fffffffd4b0) at perf.c:400
#13 0x00000000004dd28c in main (argc=5, argv=0x7fffffffd660) at perf.c:522
(gdb)
(gdb) continue
Continuing.
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
Now its a matter of automagically assigning the BPF programs copying
syscall arg pointers to functions that are "open"-like (i.e. that need
only the first syscall arg copied as a string), or "openat"-like (2nd
arg, etc).
End result in tool output:
# perf trace -e open* ls /tmp/notthere
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libselinux.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpcre2-8.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = ls: cannot access '/tmp/notthere'-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY: No such file or directory) =
-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-snc7ry99cl6r0pqaspjim98x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-16 23:34:59 +08:00
|
|
|
* Jump to syscall specific augmenter, even if the default one,
|
|
|
|
* "!raw_syscalls:unaugmented" that will just return 1 to return the
|
|
|
|
* unagmented tracepoint payload.
|
perf augmented_syscalls: Start collecting pathnames in the BPF program
This is the start of having the raw_syscalls:sys_enter BPF handler
collecting pointer arguments, namely pathnames, and with two syscalls
that have that pointer in different arguments, "open" as it as its first
argument, "openat" as the second.
With this in place the existing beautifiers in 'perf trace' works, those
args are shown instead of just the pointer that comes with the syscalls
tracepoints.
This also serves to show and document pitfalls in the process of using
just that place in the kernel (raw_syscalls:sys_enter) plus tables
provided by userspace to collect syscall pointer arguments.
One is the need to use a barrier, as suggested by Edward, to avoid clang
optimizations that make the kernel BPF verifier to refuse loading our
pointer contents collector.
The end result should be a generic eBPF program that works in all
architectures, with the differences amongst archs resolved by the
userspace component, 'perf trace', that should get all its tables
created automatically from the kernel components where they are defined,
via string table constructors for things not expressed in BTF/DWARF
(enums, structs, etc), and otherwise using those observability files
(BTF).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-37dz54pmotgpnwg9tb6zuk9j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-05 23:23:40 +08:00
|
|
|
*/
|
perf augmented_raw_syscalls: Switch to using BPF_MAP_TYPE_PROG_ARRAY
Trying to control what arguments to copy, which ones were strings, etc
all from userspace via maps went nowhere, lots of difficulties to get
the verifier satisfied, so use what the fine BPF guys designed for such
a syscall handling mechanism: bpf_tail_call + BPF_MAP_TYPE_PROG_ARRAY.
The series leading to this should have explained it thoroughly, but the
end result, explained via gdb should help understand this:
Breakpoint 1, syscall_arg__scnprintf_filename (bf=0xc002b1 "", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1268
1268 {
(gdb) n
1269 unsigned long ptr = arg->val;
(gdb) n
1271 if (arg->augmented.args)
(gdb) n
1272 return syscall_arg__scnprintf_augmented_string(arg, bf, size);
(gdb) s
syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "", size=2031) at builtin-trace.c:1251
1251 {
(gdb) n
1252 struct augmented_arg *augmented_arg = arg->augmented.args;
(gdb) n
1253 size_t printed = scnprintf(bf, size, "\"%.*s\"", augmented_arg->size, augmented_arg->value);
(gdb) n
1258 int consumed = sizeof(*augmented_arg) + augmented_arg->size;
(gdb) p bf
$1 = 0xc002b1 "\"/etc/ld.so.cache\""
(gdb) bt
#0 syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031) at builtin-trace.c:1258
#1 0x0000000000492634 in syscall_arg__scnprintf_filename (bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1272
#2 0x0000000000493cd7 in syscall__scnprintf_val (sc=0xc0de68, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970, val=140737354091036) at builtin-trace.c:1689
#3 0x000000000049404f in syscall__scnprintf_args (sc=0xc0de68, bf=0xc002a7 "AT_FDCWD, \"/etc/ld.so.cache\"", size=2041, args=0x7ffff6cbf1ec "\234\377\377\377", augmented_args=0x7ffff6cbf21c, augmented_args_size=28, trace=0x7fffffffa170,
thread=0xbff940) at builtin-trace.c:1756
#4 0x0000000000494a97 in trace__sys_enter (trace=0x7fffffffa170, evsel=0xbe1900, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:1975
#5 0x0000000000496ff1 in trace__handle_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:2685
#6 0x0000000000497edb in __trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3029
#7 0x000000000049801e in trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3056
#8 0x00000000004988de in trace__run (trace=0x7fffffffa170, argc=2, argv=0x7fffffffd660) at builtin-trace.c:3258
#9 0x000000000049c2d3 in cmd_trace (argc=2, argv=0x7fffffffd660) at builtin-trace.c:4220
#10 0x00000000004dcb6c in run_builtin (p=0xa18e00 <commands+576>, argc=5, argv=0x7fffffffd660) at perf.c:304
#11 0x00000000004dcdd9 in handle_internal_command (argc=5, argv=0x7fffffffd660) at perf.c:356
#12 0x00000000004dcf20 in run_argv (argcp=0x7fffffffd4bc, argv=0x7fffffffd4b0) at perf.c:400
#13 0x00000000004dd28c in main (argc=5, argv=0x7fffffffd660) at perf.c:522
(gdb)
(gdb) continue
Continuing.
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
Now its a matter of automagically assigning the BPF programs copying
syscall arg pointers to functions that are "open"-like (i.e. that need
only the first syscall arg copied as a string), or "openat"-like (2nd
arg, etc).
End result in tool output:
# perf trace -e open* ls /tmp/notthere
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libselinux.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpcre2-8.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = ls: cannot access '/tmp/notthere'-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY: No such file or directory) =
-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-snc7ry99cl6r0pqaspjim98x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-16 23:34:59 +08:00
|
|
|
bpf_tail_call(args, &syscalls_sys_enter, augmented_args->args.syscall_nr);
|
perf augmented_raw_syscalls: Tell which args are filenames and how many bytes to copy
Since we know what args are strings from reading the syscall
descriptions in tracefs and also already mark such args to be beautified
using the syscall_arg__scnprintf_filename() helper, all we need is to
fill in this info in the 'syscalls' BPF map we were using to state which
syscalls the user is interested in, i.e. the syscall filter.
Right now just set that with PATH_MAX and unroll the syscall arg in the
BPF program, as the verifier isn't liking something clang generates when
unrolling the loop.
This also makes the augmented_raw_syscalls.c program support all arches,
since we removed that set of defines with the hard coded syscall
numbers, all should be automatically set for all arches, with the
syscall id mapping done correcly.
Doing baby steps here, i.e. just the first string arg for a syscall is
printed, syscalls with more than one, say, the various rename* syscalls,
need further work, but lets get first something that the BPF verifier
accepts before increasing the complexity
To test it, something like:
# perf trace -e string -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
With:
# cat ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
[trace]
#add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = 40
show_prefix = yes
#
That commented add_events line is needed for developing this
augmented_raw_syscalls.c BPF program, as if we add it via the
'add_events' mechanism so as to shorten the 'perf trace' command lines,
then we end up not setting up the -v option which precludes us having
access to the bpf verifier log :-\
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-dn863ya0cbsqycxuy0olvbt1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-04 03:52:46 +08:00
|
|
|
|
perf augmented_raw_syscalls: Switch to using BPF_MAP_TYPE_PROG_ARRAY
Trying to control what arguments to copy, which ones were strings, etc
all from userspace via maps went nowhere, lots of difficulties to get
the verifier satisfied, so use what the fine BPF guys designed for such
a syscall handling mechanism: bpf_tail_call + BPF_MAP_TYPE_PROG_ARRAY.
The series leading to this should have explained it thoroughly, but the
end result, explained via gdb should help understand this:
Breakpoint 1, syscall_arg__scnprintf_filename (bf=0xc002b1 "", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1268
1268 {
(gdb) n
1269 unsigned long ptr = arg->val;
(gdb) n
1271 if (arg->augmented.args)
(gdb) n
1272 return syscall_arg__scnprintf_augmented_string(arg, bf, size);
(gdb) s
syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "", size=2031) at builtin-trace.c:1251
1251 {
(gdb) n
1252 struct augmented_arg *augmented_arg = arg->augmented.args;
(gdb) n
1253 size_t printed = scnprintf(bf, size, "\"%.*s\"", augmented_arg->size, augmented_arg->value);
(gdb) n
1258 int consumed = sizeof(*augmented_arg) + augmented_arg->size;
(gdb) p bf
$1 = 0xc002b1 "\"/etc/ld.so.cache\""
(gdb) bt
#0 syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031) at builtin-trace.c:1258
#1 0x0000000000492634 in syscall_arg__scnprintf_filename (bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1272
#2 0x0000000000493cd7 in syscall__scnprintf_val (sc=0xc0de68, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970, val=140737354091036) at builtin-trace.c:1689
#3 0x000000000049404f in syscall__scnprintf_args (sc=0xc0de68, bf=0xc002a7 "AT_FDCWD, \"/etc/ld.so.cache\"", size=2041, args=0x7ffff6cbf1ec "\234\377\377\377", augmented_args=0x7ffff6cbf21c, augmented_args_size=28, trace=0x7fffffffa170,
thread=0xbff940) at builtin-trace.c:1756
#4 0x0000000000494a97 in trace__sys_enter (trace=0x7fffffffa170, evsel=0xbe1900, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:1975
#5 0x0000000000496ff1 in trace__handle_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:2685
#6 0x0000000000497edb in __trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3029
#7 0x000000000049801e in trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3056
#8 0x00000000004988de in trace__run (trace=0x7fffffffa170, argc=2, argv=0x7fffffffd660) at builtin-trace.c:3258
#9 0x000000000049c2d3 in cmd_trace (argc=2, argv=0x7fffffffd660) at builtin-trace.c:4220
#10 0x00000000004dcb6c in run_builtin (p=0xa18e00 <commands+576>, argc=5, argv=0x7fffffffd660) at perf.c:304
#11 0x00000000004dcdd9 in handle_internal_command (argc=5, argv=0x7fffffffd660) at perf.c:356
#12 0x00000000004dcf20 in run_argv (argcp=0x7fffffffd4bc, argv=0x7fffffffd4b0) at perf.c:400
#13 0x00000000004dd28c in main (argc=5, argv=0x7fffffffd660) at perf.c:522
(gdb)
(gdb) continue
Continuing.
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
Now its a matter of automagically assigning the BPF programs copying
syscall arg pointers to functions that are "open"-like (i.e. that need
only the first syscall arg copied as a string), or "openat"-like (2nd
arg, etc).
End result in tool output:
# perf trace -e open* ls /tmp/notthere
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libselinux.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpcre2-8.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = ls: cannot access '/tmp/notthere'-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY: No such file or directory) =
-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-snc7ry99cl6r0pqaspjim98x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-16 23:34:59 +08:00
|
|
|
// If not found on the PROG_ARRAY syscalls map, then we're filtering it:
|
|
|
|
return 0;
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
SEC("raw_syscalls:sys_exit")
|
|
|
|
int sys_exit(struct syscall_exit_args *args)
|
|
|
|
{
|
perf trace: Implement syscall filtering in augmented_syscalls
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with
one bool per syscall, stating if it should be filtered or not.
So, with a pre-built augmented_raw_syscalls.o file, we use:
# perf trace -e open*,augmented_raw_syscalls.o
0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138
187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11
187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167
^C#
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-12-13 00:39:24 +08:00
|
|
|
struct syscall_exit_args exit_args;
|
|
|
|
|
|
|
|
if (pid_filter__has(&pids_filtered, getpid()))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
probe_read(&exit_args, sizeof(exit_args), args);
|
perf augmented_raw_syscalls: Switch to using BPF_MAP_TYPE_PROG_ARRAY
Trying to control what arguments to copy, which ones were strings, etc
all from userspace via maps went nowhere, lots of difficulties to get
the verifier satisfied, so use what the fine BPF guys designed for such
a syscall handling mechanism: bpf_tail_call + BPF_MAP_TYPE_PROG_ARRAY.
The series leading to this should have explained it thoroughly, but the
end result, explained via gdb should help understand this:
Breakpoint 1, syscall_arg__scnprintf_filename (bf=0xc002b1 "", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1268
1268 {
(gdb) n
1269 unsigned long ptr = arg->val;
(gdb) n
1271 if (arg->augmented.args)
(gdb) n
1272 return syscall_arg__scnprintf_augmented_string(arg, bf, size);
(gdb) s
syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "", size=2031) at builtin-trace.c:1251
1251 {
(gdb) n
1252 struct augmented_arg *augmented_arg = arg->augmented.args;
(gdb) n
1253 size_t printed = scnprintf(bf, size, "\"%.*s\"", augmented_arg->size, augmented_arg->value);
(gdb) n
1258 int consumed = sizeof(*augmented_arg) + augmented_arg->size;
(gdb) p bf
$1 = 0xc002b1 "\"/etc/ld.so.cache\""
(gdb) bt
#0 syscall_arg__scnprintf_augmented_string (arg=0x7fffffff7970, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031) at builtin-trace.c:1258
#1 0x0000000000492634 in syscall_arg__scnprintf_filename (bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970) at builtin-trace.c:1272
#2 0x0000000000493cd7 in syscall__scnprintf_val (sc=0xc0de68, bf=0xc002b1 "\"/etc/ld.so.cache\"", size=2031, arg=0x7fffffff7970, val=140737354091036) at builtin-trace.c:1689
#3 0x000000000049404f in syscall__scnprintf_args (sc=0xc0de68, bf=0xc002a7 "AT_FDCWD, \"/etc/ld.so.cache\"", size=2041, args=0x7ffff6cbf1ec "\234\377\377\377", augmented_args=0x7ffff6cbf21c, augmented_args_size=28, trace=0x7fffffffa170,
thread=0xbff940) at builtin-trace.c:1756
#4 0x0000000000494a97 in trace__sys_enter (trace=0x7fffffffa170, evsel=0xbe1900, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:1975
#5 0x0000000000496ff1 in trace__handle_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0, sample=0x7fffffff7b00) at builtin-trace.c:2685
#6 0x0000000000497edb in __trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3029
#7 0x000000000049801e in trace__deliver_event (trace=0x7fffffffa170, event=0x7ffff6cbf1a0) at builtin-trace.c:3056
#8 0x00000000004988de in trace__run (trace=0x7fffffffa170, argc=2, argv=0x7fffffffd660) at builtin-trace.c:3258
#9 0x000000000049c2d3 in cmd_trace (argc=2, argv=0x7fffffffd660) at builtin-trace.c:4220
#10 0x00000000004dcb6c in run_builtin (p=0xa18e00 <commands+576>, argc=5, argv=0x7fffffffd660) at perf.c:304
#11 0x00000000004dcdd9 in handle_internal_command (argc=5, argv=0x7fffffffd660) at perf.c:356
#12 0x00000000004dcf20 in run_argv (argcp=0x7fffffffd4bc, argv=0x7fffffffd4b0) at perf.c:400
#13 0x00000000004dd28c in main (argc=5, argv=0x7fffffffd660) at perf.c:522
(gdb)
(gdb) continue
Continuing.
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
Now its a matter of automagically assigning the BPF programs copying
syscall arg pointers to functions that are "open"-like (i.e. that need
only the first syscall arg copied as a string), or "openat"-like (2nd
arg, etc).
End result in tool output:
# perf trace -e open* ls /tmp/notthere
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libselinux.so.1", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpcre2-8.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/lib64/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = 3
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = ls: cannot access '/tmp/notthere'-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY: No such file or directory) =
-1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-snc7ry99cl6r0pqaspjim98x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-16 23:34:59 +08:00
|
|
|
/*
|
|
|
|
* Jump to syscall specific return augmenter, even if the default one,
|
|
|
|
* "!raw_syscalls:unaugmented" that will just return 1 to return the
|
|
|
|
* unagmented tracepoint payload.
|
|
|
|
*/
|
|
|
|
bpf_tail_call(args, &syscalls_sys_exit, exit_args.syscall_nr);
|
|
|
|
/*
|
|
|
|
* If not found on the PROG_ARRAY syscalls map, then we're filtering it:
|
|
|
|
*/
|
|
|
|
return 0;
|
perf examples bpf: Start augmenting raw_syscalls:sys_{start,exit}
The previous approach of attaching to each syscall showed how it is
possible to augment tracepoints and use that augmentation, pointer
payloads, in the existing beautifiers in 'perf trace', but for a more
general solution we now will try to augment the main
raw_syscalls:sys_{enter,exit} syscalls, and then pass instructions in
maps so that it knows which syscalls and which pointer contents, and how
many bytes for each of the arguments should be copied.
Start with just the bare minimum to collect what is provided by those
two tracepoints via the __augmented_syscalls__ map + bpf-output perf
event, which results in perf trace showing them without connecting
enter+exit:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
0.000 sleep/11563 raw_syscalls:sys_exit:NR 59 = 0
0.019 ( ): sleep/11563 brk() ...
0.021 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.033 ( ): sleep/11563 access(filename:, mode: R) ...
0.037 sleep/11563 raw_syscalls:sys_exit:NR 21 = -2
0.041 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.044 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.045 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf7119b0) ...
0.046 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.047 ( ): sleep/11563 mmap(len: 103334, prot: READ, flags: PRIVATE, fd: 3) ...
0.049 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285493248
0.050 ( ): sleep/11563 close(fd: 3) ...
0.051 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.059 ( ): sleep/11563 openat(dfd: CWD, filename: , flags: CLOEXEC) ...
0.062 sleep/11563 raw_syscalls:sys_exit:NR 257 = 3
0.063 ( ): sleep/11563 read(fd: 3, buf: 0x7ffdbf711b78, count: 832) ...
0.065 sleep/11563 raw_syscalls:sys_exit:NR 0 = 832
0.066 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7ffdbf711a10) ...
0.067 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.068 ( ): sleep/11563 mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS) ...
0.070 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196285485056
0.073 ( ): sleep/11563 mmap(len: 3889792, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3) ...
0.076 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196279463936
0.077 ( ): sleep/11563 mprotect(start: 0x7f81fd8a8000, len: 2093056) ...
0.083 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.084 ( ): sleep/11563 mmap(addr: 0x7f81fdaa7000, len: 24576, prot: READ|WRITE, flags: PRIVATE|FIXED|DENYWRITE, fd: 3, off: 1753088) ...
0.088 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283314176
0.091 ( ): sleep/11563 mmap(addr: 0x7f81fdaad000, len: 14976, prot: READ|WRITE, flags: PRIVATE|FIXED|ANONYMOUS) ...
0.093 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196283338752
0.097 ( ): sleep/11563 close(fd: 3) ...
0.098 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.107 ( ): sleep/11563 arch_prctl(option: 4098, arg2: 140196285490432) ...
0.108 sleep/11563 raw_syscalls:sys_exit:NR 158 = 0
0.143 ( ): sleep/11563 mprotect(start: 0x7f81fdaa7000, len: 16384, prot: READ) ...
0.146 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.157 ( ): sleep/11563 mprotect(start: 0x561d037e7000, len: 4096, prot: READ) ...
0.160 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.163 ( ): sleep/11563 mprotect(start: 0x7f81fdcd5000, len: 4096, prot: READ) ...
0.165 sleep/11563 raw_syscalls:sys_exit:NR 10 = 0
0.166 ( ): sleep/11563 munmap(addr: 0x7f81fdcbb000, len: 103334) ...
0.174 sleep/11563 raw_syscalls:sys_exit:NR 11 = 0
0.216 ( ): sleep/11563 brk() ...
0.217 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642325504
0.217 ( ): sleep/11563 brk(brk: 0x561d05453000) ...
0.219 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.220 ( ): sleep/11563 brk() ...
0.221 sleep/11563 raw_syscalls:sys_exit:NR 12 = 94682642460672
0.224 ( ): sleep/11563 open(filename: , flags: CLOEXEC) ...
0.228 sleep/11563 raw_syscalls:sys_exit:NR 2 = 3
0.229 ( ): sleep/11563 fstat(fd: 3, statbuf: 0x7f81fdaacaa0) ...
0.230 sleep/11563 raw_syscalls:sys_exit:NR 5 = 0
0.231 ( ): sleep/11563 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) ...
0.234 sleep/11563 raw_syscalls:sys_exit:NR 9 = 140196166418432
0.237 ( ): sleep/11563 close(fd: 3) ...
0.238 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
0.262 ( ): sleep/11563 nanosleep(rqtp: 0x7ffdbf7126f0) ...
1000.399 sleep/11563 raw_syscalls:sys_exit:NR 35 = 0
1000.440 ( ): sleep/11563 close(fd: 1) ...
1000.447 sleep/11563 raw_syscalls:sys_exit:NR 3 = 0
1000.454 ( ): sleep/11563 close(fd: 2) ...
1000.468 ( ): sleep/11563 exit_group( )
#
In the next csets we'll connect those events to the existing enter/exit
raw_syscalls handlers in 'perf trace', just like we did with the
syscalls:sys_{enter,exit}_* tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-5nl8l4hx1tl9pqdx65nkp6pw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-01 21:34:34 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
license(GPL);
|