kernel_optimize_test/kernel/sysctl.c

2373 lines
55 KiB
C
Raw Normal View History

/*
* sysctl.c: General linux system control interface
*
* Begun 24 March 1995, Stephen Tweedie
* Added /proc support, Dec 1995
* Added bdflush entry and intvec min/max checking, 2/23/96, Tom Dyas.
* Added hooks for /proc/sys/net (minor, minor patch), 96/4/1, Mike Shaver.
* Added kernel/java-{interpreter,appletviewer}, 96/5/10, Mike Shaver.
* Dynamic registration fixes, Stephen Tweedie.
* Added kswapd-interval, ctrl-alt-del, printk stuff, 1/8/97, Chris Horn.
* Made sysctl support optional via CONFIG_SYSCTL, 1/10/97, Chris
* Horn.
* Added proc_doulongvec_ms_jiffies_minmax, 09/08/99, Carlos H. Bauer.
* Added proc_doulongvec_minmax, 09/08/99, Carlos H. Bauer.
* Changed linked lists to use list.h instead of lists.h, 02/24/00, Bill
* Wendling.
* The list_for_each() macro wasn't appropriate for the sysctl loop.
* Removed it and replaced it with older style, 03/23/00, Bill Wendling
*/
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
#include <linux/capability.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
#include <linux/capability.h>
#include <linux/smp_lock.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kobject.h>
#include <linux/net.h>
#include <linux/sysrq.h>
#include <linux/highuid.h>
#include <linux/writeback.h>
#include <linux/hugetlb.h>
#include <linux/security.h>
#include <linux/initrd.h>
#include <linux/times.h>
#include <linux/limits.h>
#include <linux/dcache.h>
#include <linux/syscalls.h>
#include <linux/nfs_fs.h>
#include <linux/acpi.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
extern int proc_nr_files(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
#ifdef CONFIG_X86
#include <asm/nmi.h>
#include <asm/stacktrace.h>
#endif
#if defined(CONFIG_SYSCTL)
/* External variables not in a header file. */
extern int C_A_D;
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
extern int sysctl_panic_on_oom;
extern int max_threads;
extern int core_uses_pid;
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:09:43 +08:00
extern int suid_dumpable;
extern char core_pattern[];
extern int pid_max;
extern int min_free_kbytes;
extern int printk_ratelimit_jiffies;
extern int printk_ratelimit_burst;
extern int pid_max_min, pid_max_max;
extern int sysctl_drop_caches;
extern int percpu_pagelist_fraction;
extern int compat_log;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
static int minolduid;
static int min_percpu_pagelist_fract = 8;
static int ngroups_max = NGROUPS_MAX;
#ifdef CONFIG_KMOD
extern char modprobe_path[];
#endif
#ifdef CONFIG_CHR_DEV_SG
extern int sg_big_buff;
#endif
#ifdef __sparc__
extern char reboot_command [];
extern int stop_a_enabled;
extern int scons_pwroff;
#endif
#ifdef __hppa__
extern int pwrsw_enabled;
extern int unaligned_enabled;
#endif
#ifdef CONFIG_S390
#ifdef CONFIG_MATHEMU
extern int sysctl_ieee_emulation_warnings;
#endif
extern int sysctl_userprocess_debug;
extern int spin_retry;
#endif
extern int sysctl_hz_timer;
#ifdef CONFIG_BSD_PROCESS_ACCT
extern int acct_parm[];
#endif
#ifdef CONFIG_IA64
extern int no_unaligned_warning;
#endif
#ifdef CONFIG_RT_MUTEXES
extern int max_lock_depth;
#endif
#ifdef CONFIG_SYSCTL_SYSCALL
static int parse_table(int __user *, int, void __user *, size_t __user *,
void __user *, size_t, ctl_table *);
#endif
#ifdef CONFIG_PROC_SYSCTL
static int proc_do_cad_pid(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
static int proc_dointvec_taint(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
#endif
static ctl_table root_table[];
static struct ctl_table_header root_table_header =
{ root_table, LIST_HEAD_INIT(root_table_header.ctl_entry) };
static ctl_table kern_table[];
static ctl_table vm_table[];
static ctl_table fs_table[];
static ctl_table debug_table[];
static ctl_table dev_table[];
extern ctl_table random_table[];
#ifdef CONFIG_UNIX98_PTYS
extern ctl_table pty_table[];
#endif
#ifdef CONFIG_INOTIFY_USER
extern ctl_table inotify_table[];
#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
#endif
/* The default sysctl tables: */
static ctl_table root_table[] = {
{
.ctl_name = CTL_KERN,
.procname = "kernel",
.mode = 0555,
.child = kern_table,
},
{
.ctl_name = CTL_VM,
.procname = "vm",
.mode = 0555,
.child = vm_table,
},
#ifdef CONFIG_NET
{
.ctl_name = CTL_NET,
.procname = "net",
.mode = 0555,
.child = net_table,
},
#endif
{
.ctl_name = CTL_FS,
.procname = "fs",
.mode = 0555,
.child = fs_table,
},
{
.ctl_name = CTL_DEBUG,
.procname = "debug",
.mode = 0555,
.child = debug_table,
},
{
.ctl_name = CTL_DEV,
.procname = "dev",
.mode = 0555,
.child = dev_table,
},
{ .ctl_name = 0 }
};
static ctl_table kern_table[] = {
{
.ctl_name = KERN_PANIC,
.procname = "panic",
.data = &panic_timeout,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_USES_PID,
.procname = "core_uses_pid",
.data = &core_uses_pid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_CORE_PATTERN,
.procname = "core_pattern",
.data = core_pattern,
[PATCH] Support piping into commands in /proc/sys/kernel/core_pattern Using the infrastructure created in previous patches implement support to pipe core dumps into programs. This is done by overloading the existing core_pattern sysctl with a new syntax: |program When the first character of the pattern is a '|' the kernel will instead threat the rest of the pattern as a command to run. The core dump will be written to the standard input of that program instead of to a file. This is useful for having automatic core dump analysis without filling up disks. The program can do some simple analysis and save only a summary of the core dump. The core dump proces will run with the privileges and in the name space of the process that caused the core dump. I also increased the core pattern size to 128 bytes so that longer command lines fit. Most of the changes comes from allowing core dumps without seeks. They are fairly straight forward though. One small incompatibility is that if someone had a core pattern previously that started with '|' they will get suddenly new behaviour. I think that's unlikely to be a real problem though. Additional background: > Very nice, do you happen to have a program that can accept this kind of > input for crash dumps? I'm guessing that the embedded people will > really want this functionality. I had a cheesy demo/prototype. Basically it wrote the dump to a file again, ran gdb on it to get a backtrace and wrote the summary to a shared directory. Then there was a simple CGI script to generate a "top 10" crashes HTML listing. Unfortunately this still had the disadvantage to needing full disk space for a dump except for deleting it afterwards (in fact it was worse because over the pipe holes didn't work so if you have a holey address map it would require more space). Fortunately gdb seems to be happy to handle /proc/pid/fd/xxx input pipes as cores (at least it worked with zsh's =(cat core) syntax), so it would be likely possible to do it without temporary space with a simple wrapper that calls it in the right way. I ran out of time before doing that though. The demo prototype scripts weren't very good. If there is really interest I can dig them out (they are currently on a laptop disk on the desk with the laptop itself being in service), but I would recommend to rewrite them for any serious application of this and fix the disk space problem. Also to be really useful it should probably find a way to automatically fetch the debuginfos (I cheated and just installed them in advance). If nobody else does it I can probably do the rewrite myself again at some point. My hope at some point was that desktops would support it in their builtin crash reporters, but at least the KDE people I talked too seemed to be happy with their user space only solution. Alan sayeth: I don't believe that piping as such as neccessarily the right model, but the ability to intercept and processes core dumps from user space is asked for by many enterprise users as well. They want to know about, capture, analyse and process core dumps, often centrally and in automated form. [akpm@osdl.org: loff_t != unsigned long] Signed-off-by: Andi Kleen <ak@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 14:29:28 +08:00
.maxlen = 128,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#ifdef CONFIG_PROC_SYSCTL
{
.ctl_name = KERN_TAINTED,
.procname = "tainted",
.data = &tainted,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_taint,
},
#endif
{
.ctl_name = KERN_CAP_BSET,
.procname = "cap-bound",
.data = &cap_bset,
.maxlen = sizeof(kernel_cap_t),
.mode = 0600,
.proc_handler = &proc_dointvec_bset,
},
#ifdef CONFIG_BLK_DEV_INITRD
{
.ctl_name = KERN_REALROOTDEV,
.procname = "real-root-dev",
.data = &real_root_dev,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef __sparc__
{
.ctl_name = KERN_SPARC_REBOOT,
.procname = "reboot-cmd",
.data = reboot_command,
.maxlen = 256,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
{
.ctl_name = KERN_SPARC_STOP_A,
.procname = "stop-a",
.data = &stop_a_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_SPARC_SCONS_PWROFF,
.procname = "scons-poweroff",
.data = &scons_pwroff,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef __hppa__
{
.ctl_name = KERN_HPPA_PWRSW,
.procname = "soft-power",
.data = &pwrsw_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_HPPA_UNALIGNED,
.procname = "unaligned-trap",
.data = &unaligned_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_CTLALTDEL,
.procname = "ctrl-alt-del",
.data = &C_A_D,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_PRINTK,
.procname = "printk",
.data = &console_loglevel,
.maxlen = 4*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef CONFIG_KMOD
{
.ctl_name = KERN_MODPROBE,
.procname = "modprobe",
.data = &modprobe_path,
.maxlen = KMOD_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
{
.ctl_name = KERN_HOTPLUG,
.procname = "hotplug",
.data = &uevent_helper,
.maxlen = UEVENT_HELPER_PATH_LEN,
.mode = 0644,
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
#endif
#ifdef CONFIG_CHR_DEV_SG
{
.ctl_name = KERN_SG_BIG_BUFF,
.procname = "sg-big-buff",
.data = &sg_big_buff,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_BSD_PROCESS_ACCT
{
.ctl_name = KERN_ACCT,
.procname = "acct",
.data = &acct_parm,
.maxlen = 3*sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MAGIC_SYSRQ
{
.ctl_name = KERN_SYSRQ,
.procname = "sysrq",
.data = &__sysrq_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_PROC_SYSCTL
{
.ctl_name = KERN_CADPID,
.procname = "cad_pid",
.data = NULL,
.maxlen = sizeof (int),
.mode = 0600,
.proc_handler = &proc_do_cad_pid,
},
#endif
{
.ctl_name = KERN_MAX_THREADS,
.procname = "threads-max",
.data = &max_threads,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_RANDOM,
.procname = "random",
.mode = 0555,
.child = random_table,
},
#ifdef CONFIG_UNIX98_PTYS
{
.ctl_name = KERN_PTY,
.procname = "pty",
.mode = 0555,
.child = pty_table,
},
#endif
{
.ctl_name = KERN_OVERFLOWUID,
.procname = "overflowuid",
.data = &overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = KERN_OVERFLOWGID,
.procname = "overflowgid",
.data = &overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
#ifdef CONFIG_S390
#ifdef CONFIG_MATHEMU
{
.ctl_name = KERN_IEEE_EMULATION_WARNINGS,
.procname = "ieee_emulation_warnings",
.data = &sysctl_ieee_emulation_warnings,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_NO_IDLE_HZ
{
.ctl_name = KERN_HZ_TIMER,
.procname = "hz_timer",
.data = &sysctl_hz_timer,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_S390_USER_DEBUG_LOGGING,
.procname = "userprocess_debug",
.data = &sysctl_userprocess_debug,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = KERN_PIDMAX,
.procname = "pid_max",
.data = &pid_max,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = sysctl_intvec,
.extra1 = &pid_max_min,
.extra2 = &pid_max_max,
},
{
.ctl_name = KERN_PANIC_ON_OOPS,
.procname = "panic_on_oops",
.data = &panic_on_oops,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_PRINTK_RATELIMIT,
.procname = "printk_ratelimit",
.data = &printk_ratelimit_jiffies,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
{
.ctl_name = KERN_PRINTK_RATELIMIT_BURST,
.procname = "printk_ratelimit_burst",
.data = &printk_ratelimit_burst,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_NGROUPS_MAX,
.procname = "ngroups_max",
.data = &ngroups_max,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
{
.ctl_name = KERN_UNKNOWN_NMI_PANIC,
.procname = "unknown_nmi_panic",
.data = &unknown_nmi_panic,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_NMI_WATCHDOG,
.procname = "nmi_watchdog",
.data = &nmi_watchdog_enabled,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_nmi_enabled,
},
#endif
#if defined(CONFIG_X86)
{
.ctl_name = KERN_PANIC_ON_NMI,
.procname = "panic_on_unrecovered_nmi",
.data = &panic_on_unrecovered_nmi,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = KERN_BOOTLOADER_TYPE,
.procname = "bootloader_type",
.data = &bootloader_type,
.maxlen = sizeof (int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
.data = &kstack_depth_to_print,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#if defined(CONFIG_MMU)
{
.ctl_name = KERN_RANDOMIZE,
.procname = "randomize_va_space",
.data = &randomize_va_space,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#if defined(CONFIG_S390) && defined(CONFIG_SMP)
{
.ctl_name = KERN_SPIN_RETRY,
.procname = "spin_retry",
.data = &spin_retry,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_ACPI_SLEEP
{
.ctl_name = KERN_ACPI_VIDEO_FLAGS,
.procname = "acpi_video_flags",
.data = &acpi_video_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
#endif
#ifdef CONFIG_IA64
{
.ctl_name = KERN_IA64_UNALIGNED,
.procname = "ignore-unaligned-usertrap",
.data = &no_unaligned_warning,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_COMPAT
{
.ctl_name = KERN_COMPAT_LOG,
.procname = "compat-log",
.data = &compat_log,
.maxlen = sizeof (int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_RT_MUTEXES
{
.ctl_name = KERN_MAX_LOCK_DEPTH,
.procname = "max_lock_depth",
.data = &max_lock_depth,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{ .ctl_name = 0 }
};
/* Constants for minimum and maximum testing in vm_table.
We use these as one-element integer vectors. */
static int zero;
static int one_hundred = 100;
static ctl_table vm_table[] = {
{
.ctl_name = VM_OVERCOMMIT_MEMORY,
.procname = "overcommit_memory",
.data = &sysctl_overcommit_memory,
.maxlen = sizeof(sysctl_overcommit_memory),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_PANIC_ON_OOM,
.procname = "panic_on_oom",
.data = &sysctl_panic_on_oom,
.maxlen = sizeof(sysctl_panic_on_oom),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_OVERCOMMIT_RATIO,
.procname = "overcommit_ratio",
.data = &sysctl_overcommit_ratio,
.maxlen = sizeof(sysctl_overcommit_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_PAGE_CLUSTER,
.procname = "page-cluster",
.data = &page_cluster,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_DIRTY_BACKGROUND,
.procname = "dirty_background_ratio",
.data = &dirty_background_ratio,
.maxlen = sizeof(dirty_background_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.ctl_name = VM_DIRTY_RATIO,
.procname = "dirty_ratio",
.data = &vm_dirty_ratio,
.maxlen = sizeof(vm_dirty_ratio),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
{
.ctl_name = VM_DIRTY_WB_CS,
.procname = "dirty_writeback_centisecs",
.data = &dirty_writeback_interval,
.maxlen = sizeof(dirty_writeback_interval),
.mode = 0644,
.proc_handler = &dirty_writeback_centisecs_handler,
},
{
.ctl_name = VM_DIRTY_EXPIRE_CS,
.procname = "dirty_expire_centisecs",
.data = &dirty_expire_interval,
.maxlen = sizeof(dirty_expire_interval),
.mode = 0644,
.proc_handler = &proc_dointvec_userhz_jiffies,
},
{
.ctl_name = VM_NR_PDFLUSH_THREADS,
.procname = "nr_pdflush_threads",
.data = &nr_pdflush_threads,
.maxlen = sizeof nr_pdflush_threads,
.mode = 0444 /* read-only*/,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.data = &vm_swappiness,
.maxlen = sizeof(vm_swappiness),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
#ifdef CONFIG_HUGETLB_PAGE
{
.ctl_name = VM_HUGETLB_PAGES,
.procname = "nr_hugepages",
.data = &max_huge_pages,
.maxlen = sizeof(unsigned long),
.mode = 0644,
.proc_handler = &hugetlb_sysctl_handler,
.extra1 = (void *)&hugetlb_zero,
.extra2 = (void *)&hugetlb_infinity,
},
{
.ctl_name = VM_HUGETLB_GROUP,
.procname = "hugetlb_shm_group",
.data = &sysctl_hugetlb_shm_group,
.maxlen = sizeof(gid_t),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
{
.ctl_name = VM_LOWMEM_RESERVE_RATIO,
.procname = "lowmem_reserve_ratio",
.data = &sysctl_lowmem_reserve_ratio,
.maxlen = sizeof(sysctl_lowmem_reserve_ratio),
.mode = 0644,
.proc_handler = &lowmem_reserve_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
},
{
.ctl_name = VM_DROP_PAGECACHE,
.procname = "drop_caches",
.data = &sysctl_drop_caches,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = drop_caches_sysctl_handler,
.strategy = &sysctl_intvec,
},
{
.ctl_name = VM_MIN_FREE_KBYTES,
.procname = "min_free_kbytes",
.data = &min_free_kbytes,
.maxlen = sizeof(min_free_kbytes),
.mode = 0644,
.proc_handler = &min_free_kbytes_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_PERCPU_PAGELIST_FRACTION,
.procname = "percpu_pagelist_fraction",
.data = &percpu_pagelist_fraction,
.maxlen = sizeof(percpu_pagelist_fraction),
.mode = 0644,
.proc_handler = &percpu_pagelist_fraction_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &min_percpu_pagelist_fract,
},
#ifdef CONFIG_MMU
{
.ctl_name = VM_MAX_MAP_COUNT,
.procname = "max_map_count",
.data = &sysctl_max_map_count,
.maxlen = sizeof(sysctl_max_map_count),
.mode = 0644,
.proc_handler = &proc_dointvec
},
#endif
{
.ctl_name = VM_LAPTOP_MODE,
.procname = "laptop_mode",
.data = &laptop_mode,
.maxlen = sizeof(laptop_mode),
.mode = 0644,
.proc_handler = &proc_dointvec_jiffies,
.strategy = &sysctl_jiffies,
},
{
.ctl_name = VM_BLOCK_DUMP,
.procname = "block_dump",
.data = &block_dump,
.maxlen = sizeof(block_dump),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_VFS_CACHE_PRESSURE,
.procname = "vfs_cache_pressure",
.data = &sysctl_vfs_cache_pressure,
.maxlen = sizeof(sysctl_vfs_cache_pressure),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
{
.ctl_name = VM_LEGACY_VA_LAYOUT,
.procname = "legacy_va_layout",
.data = &sysctl_legacy_va_layout,
.maxlen = sizeof(sysctl_legacy_va_layout),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#endif
#ifdef CONFIG_NUMA
{
.ctl_name = VM_ZONE_RECLAIM_MODE,
.procname = "zone_reclaim_mode",
.data = &zone_reclaim_mode,
.maxlen = sizeof(zone_reclaim_mode),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
{
.ctl_name = VM_MIN_UNMAPPED,
.procname = "min_unmapped_ratio",
.data = &sysctl_min_unmapped_ratio,
.maxlen = sizeof(sysctl_min_unmapped_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_unmapped_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 14:31:52 +08:00
{
.ctl_name = VM_MIN_SLAB,
.procname = "min_slab_ratio",
.data = &sysctl_min_slab_ratio,
.maxlen = sizeof(sysctl_min_slab_ratio),
.mode = 0644,
.proc_handler = &sysctl_min_slab_ratio_sysctl_handler,
.strategy = &sysctl_intvec,
.extra1 = &zero,
.extra2 = &one_hundred,
},
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:53:50 +08:00
#endif
#if defined(CONFIG_X86_32) || \
(defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
[PATCH] vdso: randomize the i386 vDSO by moving it into a vma Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:53:50 +08:00
{
.ctl_name = VM_VDSO_ENABLED,
.procname = "vdso_enabled",
.data = &vdso_enabled,
.maxlen = sizeof(vdso_enabled),
.mode = 0644,
.proc_handler = &proc_dointvec,
.strategy = &sysctl_intvec,
.extra1 = &zero,
},
#endif
{ .ctl_name = 0 }
};
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
static ctl_table binfmt_misc_table[] = {
{ .ctl_name = 0 }
};
#endif
static ctl_table fs_table[] = {
{
.ctl_name = FS_NRINODE,
.procname = "inode-nr",
.data = &inodes_stat,
.maxlen = 2*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_STATINODE,
.procname = "inode-state",
.data = &inodes_stat,
.maxlen = 7*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_NRFILE,
.procname = "file-nr",
.data = &files_stat,
.maxlen = 3*sizeof(int),
.mode = 0444,
.proc_handler = &proc_nr_files,
},
{
.ctl_name = FS_MAXFILE,
.procname = "file-max",
.data = &files_stat.max_files,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_DENTRY,
.procname = "dentry-state",
.data = &dentry_stat,
.maxlen = 6*sizeof(int),
.mode = 0444,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_OVERFLOWUID,
.procname = "overflowuid",
.data = &fs_overflowuid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_OVERFLOWGID,
.procname = "overflowgid",
.data = &fs_overflowgid,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec_minmax,
.strategy = &sysctl_intvec,
.extra1 = &minolduid,
.extra2 = &maxolduid,
},
{
.ctl_name = FS_LEASES,
.procname = "leases-enable",
.data = &leases_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#ifdef CONFIG_DNOTIFY
{
.ctl_name = FS_DIR_NOTIFY,
.procname = "dir-notify-enable",
.data = &dir_notify_enable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_MMU
{
.ctl_name = FS_LEASE_TIME,
.procname = "lease-break-time",
.data = &lease_break_time,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
{
.ctl_name = FS_AIO_NR,
.procname = "aio-nr",
.data = &aio_nr,
.maxlen = sizeof(aio_nr),
.mode = 0444,
.proc_handler = &proc_doulongvec_minmax,
},
{
.ctl_name = FS_AIO_MAX_NR,
.procname = "aio-max-nr",
.data = &aio_max_nr,
.maxlen = sizeof(aio_max_nr),
.mode = 0644,
.proc_handler = &proc_doulongvec_minmax,
},
#ifdef CONFIG_INOTIFY_USER
{
.ctl_name = FS_INOTIFY,
.procname = "inotify",
.mode = 0555,
.child = inotify_table,
},
#endif
#endif
[PATCH] setuid core dump Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:09:43 +08:00
{
.ctl_name = KERN_SETUID_DUMPABLE,
.procname = "suid_dumpable",
.data = &suid_dumpable,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec,
},
#if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "binfmt_misc",
.mode = 0555,
.child = binfmt_misc_table,
},
#endif
{ .ctl_name = 0 }
};
static ctl_table debug_table[] = {
{ .ctl_name = 0 }
};
static ctl_table dev_table[] = {
{ .ctl_name = 0 }
};
static DEFINE_SPINLOCK(sysctl_lock);
/* called under sysctl_lock */
static int use_table(struct ctl_table_header *p)
{
if (unlikely(p->unregistering))
return 0;
p->used++;
return 1;
}
/* called under sysctl_lock */
static void unuse_table(struct ctl_table_header *p)
{
if (!--p->used)
if (unlikely(p->unregistering))
complete(p->unregistering);
}
/* called under sysctl_lock, will reacquire if has to wait */
static void start_unregistering(struct ctl_table_header *p)
{
/*
* if p->used is 0, nobody will ever touch that entry again;
* we'll eliminate all paths to it before dropping sysctl_lock
*/
if (unlikely(p->used)) {
struct completion wait;
init_completion(&wait);
p->unregistering = &wait;
spin_unlock(&sysctl_lock);
wait_for_completion(&wait);
spin_lock(&sysctl_lock);
}
/*
* do not remove from the list until nobody holds it; walking the
* list in do_sysctl() relies on that.
*/
list_del_init(&p->ctl_entry);
}
void sysctl_head_finish(struct ctl_table_header *head)
{
if (!head)
return;
spin_lock(&sysctl_lock);
unuse_table(head);
spin_unlock(&sysctl_lock);
}
struct ctl_table_header *sysctl_head_next(struct ctl_table_header *prev)
{
struct ctl_table_header *head;
struct list_head *tmp;
spin_lock(&sysctl_lock);
if (prev) {
tmp = &prev->ctl_entry;
unuse_table(prev);
goto next;
}
tmp = &root_table_header.ctl_entry;
for (;;) {
head = list_entry(tmp, struct ctl_table_header, ctl_entry);
if (!use_table(head))
goto next;
spin_unlock(&sysctl_lock);
return head;
next:
tmp = tmp->next;
if (tmp == &root_table_header.ctl_entry)
break;
}
spin_unlock(&sysctl_lock);
return NULL;
}
#ifdef CONFIG_SYSCTL_SYSCALL
int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
struct ctl_table_header *head;
int error = -ENOTDIR;
if (nlen <= 0 || nlen >= CTL_MAXNAME)
return -ENOTDIR;
if (oldval) {
int old_len;
if (!oldlenp || get_user(old_len, oldlenp))
return -EFAULT;
}
for (head = sysctl_head_next(NULL); head;
head = sysctl_head_next(head)) {
error = parse_table(name, nlen, oldval, oldlenp,
newval, newlen, head->ctl_table);
if (error != -ENOTDIR) {
sysctl_head_finish(head);
break;
}
}
return error;
}
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
struct __sysctl_args tmp;
int error;
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
lock_kernel();
error = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, tmp.oldlenp,
tmp.newval, tmp.newlen);
unlock_kernel();
return error;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
/*
* sysctl_perm does NOT grant the superuser all rights automatically, because
* some sysctl variables are readonly even to root.
*/
static int test_perm(int mode, int op)
{
if (!current->euid)
mode >>= 6;
else if (in_egroup_p(0))
mode >>= 3;
if ((mode & op & 0007) == op)
return 0;
return -EACCES;
}
int sysctl_perm(ctl_table *table, int op)
{
int error;
error = security_sysctl(table, op);
if (error)
return error;
return test_perm(table->mode, op);
}
#ifdef CONFIG_SYSCTL_SYSCALL
static int parse_table(int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen,
ctl_table *table)
{
int n;
repeat:
if (!nlen)
return -ENOTDIR;
if (get_user(n, name))
return -EFAULT;
for ( ; table->ctl_name || table->procname; table++) {
if (!table->ctl_name)
continue;
if (n == table->ctl_name) {
int error;
if (table->child) {
if (sysctl_perm(table, 001))
return -EPERM;
name++;
nlen--;
table = table->child;
goto repeat;
}
error = do_sysctl_strategy(table, name, nlen,
oldval, oldlenp,
newval, newlen);
return error;
}
}
return -ENOTDIR;
}
/* Perform the actual read/write of a sysctl table entry. */
int do_sysctl_strategy (ctl_table *table,
int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
int op = 0, rc;
size_t len;
if (oldval)
op |= 004;
if (newval)
op |= 002;
if (sysctl_perm(table, op))
return -EPERM;
if (table->strategy) {
rc = table->strategy(table, name, nlen, oldval, oldlenp,
newval, newlen);
if (rc < 0)
return rc;
if (rc > 0)
return 0;
}
/* If there is no strategy routine, or if the strategy returns
* zero, proceed with automatic r/w */
if (table->data && table->maxlen) {
if (oldval && oldlenp) {
if (get_user(len, oldlenp))
return -EFAULT;
if (len) {
if (len > table->maxlen)
len = table->maxlen;
if(copy_to_user(oldval, table->data, len))
return -EFAULT;
if(put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
len = newlen;
if (len > table->maxlen)
len = table->maxlen;
if(copy_from_user(table->data, newval, len))
return -EFAULT;
}
}
return 0;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
static void sysctl_set_parent(struct ctl_table *parent, struct ctl_table *table)
{
for (; table->ctl_name || table->procname; table++) {
table->parent = parent;
if (table->child)
sysctl_set_parent(table, table->child);
}
}
static __init int sysctl_init(void)
{
sysctl_set_parent(NULL, root_table);
return 0;
}
core_initcall(sysctl_init);
/**
* register_sysctl_table - register a sysctl hierarchy
* @table: the top-level table structure
*
* Register a sysctl table hierarchy. @table should be a filled in ctl_table
* array. An entry with a ctl_name of 0 terminates the table.
*
* The members of the &ctl_table structure are used as follows:
*
* ctl_name - This is the numeric sysctl value used by sysctl(2). The number
* must be unique within that level of sysctl
*
* procname - the name of the sysctl file under /proc/sys. Set to %NULL to not
* enter a sysctl file
*
* data - a pointer to data for use by proc_handler
*
* maxlen - the maximum size in bytes of the data
*
* mode - the file permissions for the /proc/sys file, and for sysctl(2)
*
* child - a pointer to the child sysctl table if this entry is a directory, or
* %NULL.
*
* proc_handler - the text handler routine (described below)
*
* strategy - the strategy routine (described below)
*
* de - for internal use by the sysctl routines
*
* extra1, extra2 - extra pointers usable by the proc handler routines
*
* Leaf nodes in the sysctl tree will be represented by a single file
* under /proc; non-leaf nodes will be represented by directories.
*
* sysctl(2) can automatically manage read and write requests through
* the sysctl table. The data and maxlen fields of the ctl_table
* struct enable minimal validation of the values being written to be
* performed, and the mode field allows minimal authentication.
*
* More sophisticated management can be enabled by the provision of a
* strategy routine with the table entry. This will be called before
* any automatic read or write of the data is performed.
*
* The strategy routine may return
*
* < 0 - Error occurred (error is passed to user process)
*
* 0 - OK - proceed with automatic read or write.
*
* > 0 - OK - read or write has been done by the strategy routine, so
* return immediately.
*
* There must be a proc_handler routine for any terminal nodes
* mirrored under /proc/sys (non-terminals are handled by a built-in
* directory handler). Several default handlers are available to
* cover common cases -
*
* proc_dostring(), proc_dointvec(), proc_dointvec_jiffies(),
* proc_dointvec_userhz_jiffies(), proc_dointvec_minmax(),
* proc_doulongvec_ms_jiffies_minmax(), proc_doulongvec_minmax()
*
* It is the handler's job to read the input buffer from user memory
* and process it. The handler should return 0 on success.
*
* This routine returns %NULL on a failure to register, and a pointer
* to the table header on success.
*/
[PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 16:34:09 +08:00
struct ctl_table_header *register_sysctl_table(ctl_table * table)
{
struct ctl_table_header *tmp;
tmp = kmalloc(sizeof(struct ctl_table_header), GFP_KERNEL);
if (!tmp)
return NULL;
tmp->ctl_table = table;
INIT_LIST_HEAD(&tmp->ctl_entry);
tmp->used = 0;
tmp->unregistering = NULL;
sysctl_set_parent(NULL, table);
spin_lock(&sysctl_lock);
[PATCH] sysctl: remove insert_at_head from register_sysctl The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 16:34:09 +08:00
list_add_tail(&tmp->ctl_entry, &root_table_header.ctl_entry);
spin_unlock(&sysctl_lock);
return tmp;
}
/**
* unregister_sysctl_table - unregister a sysctl table hierarchy
* @header: the header returned from register_sysctl_table
*
* Unregisters the sysctl table and all children. proc entries may not
* actually be removed until they are no longer used by anyone.
*/
void unregister_sysctl_table(struct ctl_table_header * header)
{
might_sleep();
spin_lock(&sysctl_lock);
start_unregistering(header);
spin_unlock(&sysctl_lock);
kfree(header);
}
#else /* !CONFIG_SYSCTL */
struct ctl_table_header *register_sysctl_table(ctl_table * table)
{
return NULL;
}
void unregister_sysctl_table(struct ctl_table_header * table)
{
}
#endif /* CONFIG_SYSCTL */
/*
* /proc/sys support
*/
#ifdef CONFIG_PROC_SYSCTL
static int _proc_do_string(void* data, int maxlen, int write,
struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos)
{
size_t len;
char __user *p;
char c;
if (!data || !maxlen || !*lenp) {
*lenp = 0;
return 0;
}
if (write) {
len = 0;
p = buffer;
while (len < *lenp) {
if (get_user(c, p++))
return -EFAULT;
if (c == 0 || c == '\n')
break;
len++;
}
if (len >= maxlen)
len = maxlen-1;
if(copy_from_user(data, buffer, len))
return -EFAULT;
((char *) data)[len] = 0;
*ppos += *lenp;
} else {
len = strlen(data);
if (len > maxlen)
len = maxlen;
if (*ppos > len) {
*lenp = 0;
return 0;
}
data += *ppos;
len -= *ppos;
if (len > *lenp)
len = *lenp;
if (len)
if(copy_to_user(buffer, data, len))
return -EFAULT;
if (len < *lenp) {
if(put_user('\n', ((char __user *) buffer) + len))
return -EFAULT;
len++;
}
*lenp = len;
*ppos += len;
}
return 0;
}
/**
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes a string from/to the user buffer. If the kernel
* buffer provided is not large enough to hold the string, the
* string is truncated. The copied string is %NULL-terminated.
* If the string is being read by the user process, it is copied
* and a newline '\n' is added. It is truncated if the buffer is
* not large enough.
*
* Returns 0 on success.
*/
int proc_dostring(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return _proc_do_string(table->data, table->maxlen, write, filp,
buffer, lenp, ppos);
}
static int do_proc_dointvec_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = *negp ? -*lvalp : *lvalp;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
static int __do_proc_dointvec(void *tbl_data, ctl_table *table,
int write, struct file *filp, void __user *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
#define TMPBUFLEN 21
int *i, vleft, first=1, neg, val;
unsigned long lval;
size_t left, len;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
if (!tbl_data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (int *) tbl_data;
vleft = table->maxlen / sizeof(*i);
left = *lenp;
if (!conv)
conv = do_proc_dointvec_conv;
for (; left && vleft--; i++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > sizeof(buf) - 1)
len = sizeof(buf) - 1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
p++;
}
if (*p < '0' || *p > '9')
break;
lval = simple_strtoul(p, &p, 0);
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if (conv(&neg, &lval, i, 1, data))
break;
} else {
p = buf;
if (!first)
*p++ = '\t';
if (conv(&neg, &lval, i, 0, data))
break;
sprintf(p, "%s%lu", neg ? "-" : "", lval);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
static int do_proc_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
return __do_proc_dointvec(table->data, table, write, filp,
buffer, lenp, ppos, conv, data);
}
/**
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* Returns 0 on success.
*/
int proc_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
NULL,NULL);
}
#define OP_SET 0
#define OP_AND 1
#define OP_OR 2
static int do_proc_dointvec_bset_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
int op = *(int *)data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
switch(op) {
case OP_SET: *valp = val; break;
case OP_AND: *valp &= val; break;
case OP_OR: *valp |= val; break;
}
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
/*
* init may raise the set.
*/
int proc_dointvec_bset(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int op;
if (write && !capable(CAP_SYS_MODULE)) {
return -EPERM;
}
op = is_init(current) ? OP_SET : OP_AND;
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_bset_conv,&op);
}
/*
* Taint values can only be increased
*/
static int proc_dointvec_taint(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int op;
if (write && !capable(CAP_SYS_ADMIN))
return -EPERM;
op = OP_OR;
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_bset_conv,&op);
}
struct do_proc_dointvec_minmax_conv_param {
int *min;
int *max;
};
static int do_proc_dointvec_minmax_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
struct do_proc_dointvec_minmax_conv_param *param = data;
if (write) {
int val = *negp ? -*lvalp : *lvalp;
if ((param->min && *param->min > val) ||
(param->max && *param->max < val))
return -EINVAL;
*valp = val;
} else {
int val = *valp;
if (val < 0) {
*negp = -1;
*lvalp = (unsigned long)-val;
} else {
*negp = 0;
*lvalp = (unsigned long)val;
}
}
return 0;
}
/**
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, &param);
}
static int __do_proc_doulongvec_minmax(void *data, ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
#define TMPBUFLEN 21
unsigned long *i, *min, *max, val;
int vleft, first=1, neg;
size_t len, left;
char buf[TMPBUFLEN], *p;
char __user *s = buffer;
if (!data || !table->maxlen || !*lenp ||
(*ppos && !write)) {
*lenp = 0;
return 0;
}
i = (unsigned long *) data;
min = (unsigned long *) table->extra1;
max = (unsigned long *) table->extra2;
vleft = table->maxlen / sizeof(unsigned long);
left = *lenp;
for (; left && vleft--; i++, min++, max++, first=0) {
if (write) {
while (left) {
char c;
if (get_user(c, s))
return -EFAULT;
if (!isspace(c))
break;
left--;
s++;
}
if (!left)
break;
neg = 0;
len = left;
if (len > TMPBUFLEN-1)
len = TMPBUFLEN-1;
if (copy_from_user(buf, s, len))
return -EFAULT;
buf[len] = 0;
p = buf;
if (*p == '-' && left > 1) {
neg = 1;
p++;
}
if (*p < '0' || *p > '9')
break;
val = simple_strtoul(p, &p, 0) * convmul / convdiv ;
len = p-buf;
if ((len < left) && *p && !isspace(*p))
break;
if (neg)
val = -val;
s += len;
left -= len;
if(neg)
continue;
if ((min && val < *min) || (max && val > *max))
continue;
*i = val;
} else {
p = buf;
if (!first)
*p++ = '\t';
sprintf(p, "%lu", convdiv * (*i) / convmul);
len = strlen(buf);
if (len > left)
len = left;
if(copy_to_user(s, buf, len))
return -EFAULT;
left -= len;
s += len;
}
}
if (!write && !first && left) {
if(put_user('\n', s))
return -EFAULT;
left--, s++;
}
if (write) {
while (left) {
char c;
if (get_user(c, s++))
return -EFAULT;
if (!isspace(c))
break;
left--;
}
}
if (write && first)
return -EINVAL;
*lenp -= left;
*ppos += *lenp;
return 0;
#undef TMPBUFLEN
}
static int do_proc_doulongvec_minmax(ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
filp, buffer, lenp, ppos, convmul, convdiv);
}
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned long) unsigned long
* values from/to the user buffer, treated as an ASCII string. The values
* are treated as milliseconds, and converted to jiffies when they are stored.
*
* This routine will ensure the values are within the range specified by
* table->extra1 (min) and table->extra2 (max).
*
* Returns 0 on success.
*/
int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return do_proc_doulongvec_minmax(table, write, filp, buffer,
lenp, ppos, HZ, 1000l);
}
static int do_proc_dointvec_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (*lvalp > LONG_MAX / HZ)
return 1;
*valp = *negp ? -(*lvalp*HZ) : (*lvalp*HZ);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = lval / HZ;
}
return 0;
}
static int do_proc_dointvec_userhz_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
if (USER_HZ < HZ && *lvalp > (LONG_MAX / HZ) * USER_HZ)
return 1;
*valp = clock_t_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_clock_t(lval);
}
return 0;
}
static int do_proc_dointvec_ms_jiffies_conv(int *negp, unsigned long *lvalp,
int *valp,
int write, void *data)
{
if (write) {
*valp = msecs_to_jiffies(*negp ? -*lvalp : *lvalp);
} else {
int val = *valp;
unsigned long lval;
if (val < 0) {
*negp = -1;
lval = (unsigned long)-val;
} else {
*negp = 0;
lval = (unsigned long)val;
}
*lvalp = jiffies_to_msecs(lval);
}
return 0;
}
/**
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in seconds, and are converted into
* jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
/**
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: pointer to the file position
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/USER_HZ seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
do_proc_dointvec_userhz_jiffies_conv,NULL);
}
/**
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
* @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
* @ppos: the current position in the file
*
* Reads/writes up to table->maxlen/sizeof(unsigned int) integer
* values from/to the user buffer, treated as an ASCII string.
* The values read are assumed to be in 1/1000 seconds, and
* are converted into jiffies.
*
* Returns 0 on success.
*/
int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
static int proc_do_cad_pid(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
pid_t tmp;
int r;
tmp = pid_nr(cad_pid);
r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
new_pid = find_get_pid(tmp);
if (!new_pid)
return -ESRCH;
put_pid(xchg(&cad_pid, new_pid));
return 0;
}
#else /* CONFIG_PROC_FS */
int proc_dostring(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_bset(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_minmax(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_userhz_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_dointvec_ms_jiffies(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_minmax(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_ms_jiffies_minmax(ctl_table *table, int write,
struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_SYSCTL_SYSCALL
/*
* General sysctl support routines
*/
/* The generic string strategy routine: */
int sysctl_string(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (!table->data || !table->maxlen)
return -ENOTDIR;
if (oldval && oldlenp) {
size_t bufsize;
if (get_user(bufsize, oldlenp))
return -EFAULT;
if (bufsize) {
size_t len = strlen(table->data), copied;
/* This shouldn't trigger for a well-formed sysctl */
if (len > table->maxlen)
len = table->maxlen;
/* Copy up to a max of bufsize-1 bytes of the string */
copied = (len >= bufsize) ? bufsize - 1 : len;
if (copy_to_user(oldval, table->data, copied) ||
put_user(0, (char __user *)(oldval + copied)))
return -EFAULT;
if (put_user(len, oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
size_t len = newlen;
if (len > table->maxlen)
len = table->maxlen;
if(copy_from_user(table->data, newval, len))
return -EFAULT;
if (len == table->maxlen)
len--;
((char *) table->data)[len] = 0;
}
return 1;
}
/*
* This function makes sure that all of the integers in the vector
* are between the minimum and maximum values given in the arrays
* table->extra1 and table->extra2, respectively.
*/
int sysctl_intvec(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (newval && newlen) {
int __user *vec = (int __user *) newval;
int *min = (int *) table->extra1;
int *max = (int *) table->extra2;
size_t length;
int i;
if (newlen % sizeof(int) != 0)
return -EINVAL;
if (!table->extra1 && !table->extra2)
return 0;
if (newlen > table->maxlen)
newlen = table->maxlen;
length = newlen / sizeof(int);
for (i = 0; i < length; i++) {
int value;
if (get_user(value, vec + i))
return -EFAULT;
if (min && value < min[i])
return -EINVAL;
if (max && value > max[i])
return -EINVAL;
}
}
return 0;
}
/* Strategy function to convert jiffies to seconds */
int sysctl_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t olen;
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = *(int *)(table->data) / HZ;
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = new*HZ;
}
return 1;
}
/* Strategy function to convert jiffies to seconds */
int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
if (oldval && oldlenp) {
size_t olen;
if (get_user(olen, oldlenp))
return -EFAULT;
if (olen) {
int val;
if (olen < sizeof(int))
return -EINVAL;
val = jiffies_to_msecs(*(int *)(table->data));
if (put_user(val, (int __user *)oldval))
return -EFAULT;
if (put_user(sizeof(int), oldlenp))
return -EFAULT;
}
}
if (newval && newlen) {
int new;
if (newlen != sizeof(int))
return -EINVAL;
if (get_user(new, (int __user *)newval))
return -EFAULT;
*(int *)(table->data) = msecs_to_jiffies(new);
}
return 1;
}
#else /* CONFIG_SYSCTL_SYSCALL */
asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
{
static int msg_count;
struct __sysctl_args tmp;
int name[CTL_MAXNAME];
int i;
/* Read in the sysctl name for better debug message logging */
if (copy_from_user(&tmp, args, sizeof(tmp)))
return -EFAULT;
if (tmp.nlen <= 0 || tmp.nlen >= CTL_MAXNAME)
return -ENOTDIR;
for (i = 0; i < tmp.nlen; i++)
if (get_user(name[i], tmp.name + i))
return -EFAULT;
/* Ignore accesses to kernel.version */
if ((tmp.nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
goto out;
if (msg_count < 5) {
msg_count++;
printk(KERN_INFO
"warning: process `%s' used the removed sysctl "
"system call with ", current->comm);
for (i = 0; i < tmp.nlen; i++)
printk("%d.", name[i]);
printk("\n");
}
out:
return -ENOSYS;
}
int sysctl_string(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_intvec(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
int sysctl_ms_jiffies(ctl_table *table, int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen)
{
return -ENOSYS;
}
#endif /* CONFIG_SYSCTL_SYSCALL */
/*
* No sense putting this after each symbol definition, twice,
* exception granted :-)
*/
EXPORT_SYMBOL(proc_dointvec);
EXPORT_SYMBOL(proc_dointvec_jiffies);
EXPORT_SYMBOL(proc_dointvec_minmax);
EXPORT_SYMBOL(proc_dointvec_userhz_jiffies);
EXPORT_SYMBOL(proc_dointvec_ms_jiffies);
EXPORT_SYMBOL(proc_dostring);
EXPORT_SYMBOL(proc_doulongvec_minmax);
EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
EXPORT_SYMBOL(register_sysctl_table);
EXPORT_SYMBOL(sysctl_intvec);
EXPORT_SYMBOL(sysctl_jiffies);
EXPORT_SYMBOL(sysctl_ms_jiffies);
EXPORT_SYMBOL(sysctl_string);
EXPORT_SYMBOL(unregister_sysctl_table);