kernel_optimize_test/tools/perf/util/string.c

445 lines
8.4 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include "string2.h"
#include <linux/kernel.h>
#include <linux/string.h>
#include <stdlib.h>
#include "sane_ctype.h"
#define K 1024LL
/*
* perf_atoll()
* Parse (\d+)(b|B|kb|KB|mb|MB|gb|GB|tb|TB) (e.g. "256MB")
* and return its numeric value
*/
s64 perf_atoll(const char *str)
{
s64 length;
char *p;
char c;
if (!isdigit(str[0]))
goto out_err;
length = strtoll(str, &p, 10);
switch (c = *p++) {
case 'b': case 'B':
if (*p)
goto out_err;
__fallthrough;
case '\0':
return length;
default:
goto out_err;
/* two-letter suffices */
case 'k': case 'K':
length <<= 10;
break;
case 'm': case 'M':
length <<= 20;
break;
case 'g': case 'G':
length <<= 30;
break;
case 't': case 'T':
length <<= 40;
break;
}
/* we want the cases to match */
if (islower(c)) {
if (strcmp(p, "b") != 0)
goto out_err;
} else {
if (strcmp(p, "B") != 0)
goto out_err;
}
return length;
out_err:
return -1;
}
/*
* Helper function for splitting a string into an argv-like array.
* originally copied from lib/argv_split.c
*/
static const char *skip_sep(const char *cp)
{
while (*cp && isspace(*cp))
cp++;
return cp;
}
static const char *skip_arg(const char *cp)
{
while (*cp && !isspace(*cp))
cp++;
return cp;
}
static int count_argc(const char *str)
{
int count = 0;
while (*str) {
str = skip_sep(str);
if (*str) {
count++;
str = skip_arg(str);
}
}
return count;
}
/**
* argv_free - free an argv
* @argv - the argument vector to be freed
*
* Frees an argv and the strings it points to.
*/
void argv_free(char **argv)
{
char **p;
for (p = argv; *p; p++) {
free(*p);
*p = NULL;
}
free(argv);
}
/**
* argv_split - split a string at whitespace, returning an argv
* @str: the string to be split
* @argcp: returned argument count
*
* Returns an array of pointers to strings which are split out from
* @str. This is performed by strictly splitting on white-space; no
* quote processing is performed. Multiple whitespace characters are
* considered to be a single argument separator. The returned array
* is always NULL-terminated. Returns NULL on memory allocation
* failure.
*/
char **argv_split(const char *str, int *argcp)
{
int argc = count_argc(str);
char **argv = calloc(argc + 1, sizeof(*argv));
char **argvp;
if (argv == NULL)
goto out;
if (argcp)
*argcp = argc;
argvp = argv;
while (*str) {
str = skip_sep(str);
if (*str) {
const char *p = str;
char *t;
str = skip_arg(str);
t = strndup(p, str-p);
if (t == NULL)
goto fail;
*argvp++ = t;
}
}
*argvp = NULL;
out:
return argv;
fail:
argv_free(argv);
return NULL;
}
/* Character class matching */
static bool __match_charclass(const char *pat, char c, const char **npat)
{
bool complement = false, ret = true;
if (*pat == '!') {
complement = true;
pat++;
}
if (*pat++ == c) /* First character is special */
goto end;
while (*pat && *pat != ']') { /* Matching */
if (*pat == '-' && *(pat + 1) != ']') { /* Range */
if (*(pat - 1) <= c && c <= *(pat + 1))
goto end;
if (*(pat - 1) > *(pat + 1))
goto error;
pat += 2;
} else if (*pat++ == c)
goto end;
}
if (!*pat)
goto error;
ret = false;
end:
while (*pat && *pat != ']') /* Searching closing */
pat++;
if (!*pat)
goto error;
*npat = pat + 1;
return complement ? !ret : ret;
error:
return false;
}
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:36:12 +08:00
/* Glob/lazy pattern matching */
static bool __match_glob(const char *str, const char *pat, bool ignore_space,
bool case_ins)
{
while (*str && *pat && *pat != '*') {
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:36:12 +08:00
if (ignore_space) {
/* Ignore spaces for lazy matching */
if (isspace(*str)) {
str++;
continue;
}
if (isspace(*pat)) {
pat++;
continue;
}
}
if (*pat == '?') { /* Matches any single character */
str++;
pat++;
continue;
} else if (*pat == '[') /* Character classes/Ranges */
if (__match_charclass(pat + 1, *str, &pat)) {
str++;
continue;
} else
return false;
else if (*pat == '\\') /* Escaped char match as normal char */
pat++;
if (case_ins) {
if (tolower(*str) != tolower(*pat))
return false;
} else if (*str != *pat)
return false;
str++;
pat++;
}
/* Check wild card */
if (*pat == '*') {
while (*pat == '*')
pat++;
if (!*pat) /* Tail wild card matches all */
return true;
while (*str)
if (__match_glob(str++, pat, ignore_space, case_ins))
return true;
}
return !*str && !*pat;
}
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:36:12 +08:00
/**
* strglobmatch - glob expression pattern matching
* @str: the target string to match
* @pat: the pattern string to match
*
* This returns true if the @str matches @pat. @pat can includes wildcards
* ('*','?') and character classes ([CHARS], complementation and ranges are
* also supported). Also, this supports escape character ('\') to use special
* characters as normal character.
*
* Note: if @pat syntax is broken, this always returns false.
*/
bool strglobmatch(const char *str, const char *pat)
{
return __match_glob(str, pat, false, false);
}
bool strglobmatch_nocase(const char *str, const char *pat)
{
return __match_glob(str, pat, false, true);
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:36:12 +08:00
}
/**
* strlazymatch - matching pattern strings lazily with glob pattern
* @str: the target string to match
* @pat: the pattern string to match
*
* This is similar to strglobmatch, except this ignores spaces in
* the target string.
*/
bool strlazymatch(const char *str, const char *pat)
{
return __match_glob(str, pat, true, false);
perf probe: Add lazy line matching support Add lazy line matching support for specifying new probes. This also changes the syntax of perf probe a bit. Now perf probe accepts one of below probe event definitions. 1) Define event based on function name [EVENT=]FUNC[@SRC][:RLN|+OFF|%return|;PTN] [ARG ...] 2) Define event based on source file with line number [EVENT=]SRC:ALN [ARG ...] 3) Define event based on source file with lazy pattern [EVENT=]SRC;PTN [ARG ...] - New lazy matching pattern(PTN) follows ';' (semicolon). And it must be put the end of the definition. - So, @SRC is no longer the part which must be put at the end of the definition. Note that ';' (semicolon) can be interpreted as the end of a command by the shell. This means that you need to quote it. (anyway you will need to quote the lazy pattern itself too, because it may contains other sensitive characters, like '[',']' etc.). Lazy matching ------------- The lazy line matching is similar to glob matching except ignoring spaces in both of pattern and target. e.g. 'a=*' can matches 'a=b', 'a = b', 'a == b' and so on. This provides some sort of flexibility and robustness to probe point definitions against minor code changes. (for example, actual 10th line of schedule() can be changed easily by modifying schedule(), but the same line matching 'rq=cpu_rq*' may still exist.) Changes in v3: - Cast Dwarf_Addr to uintmax_t for printf-formats. Changes in v2: - Cast Dwarf_Addr to unsigned long long for printf-formats. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> LKML-Reference: <20100225133611.6725.45078.stgit@localhost6.localdomain6> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 21:36:12 +08:00
}
/**
* strtailcmp - Compare the tail of two strings
* @s1: 1st string to be compared
* @s2: 2nd string to be compared
*
* Return 0 if whole of either string is same as another's tail part.
*/
int strtailcmp(const char *s1, const char *s2)
{
int i1 = strlen(s1);
int i2 = strlen(s2);
while (--i1 >= 0 && --i2 >= 0) {
if (s1[i1] != s2[i2])
return s1[i1] - s2[i2];
}
return 0;
}
/**
* strxfrchar - Locate and replace character in @s
* @s: The string to be searched/changed.
* @from: Source character to be replaced.
* @to: Destination character.
*
* Return pointer to the changed string.
*/
char *strxfrchar(char *s, char from, char to)
{
char *p = s;
while ((p = strchr(p, from)) != NULL)
*p++ = to;
return s;
}
/**
* ltrim - Removes leading whitespace from @s.
* @s: The string to be stripped.
*
* Return pointer to the first non-whitespace character in @s.
*/
char *ltrim(char *s)
{
while (isspace(*s))
s++;
return s;
}
/**
* rtrim - Removes trailing whitespace from @s.
* @s: The string to be stripped.
*
* Note that the first trailing whitespace is replaced with a %NUL-terminator
* in the given string @s. Returns @s.
*/
char *rtrim(char *s)
{
size_t size = strlen(s);
char *end;
if (!size)
return s;
end = s + size - 1;
while (end >= s && isspace(*end))
end--;
*(end + 1) = '\0';
return s;
}
char *asprintf_expr_inout_ints(const char *var, bool in, size_t nints, int *ints)
{
/*
* FIXME: replace this with an expression using log10() when we
* find a suitable implementation, maybe the one in the dvb drivers...
*
* "%s == %d || " = log10(MAXINT) * 2 + 8 chars for the operators
*/
size_t size = nints * 28 + 1; /* \0 */
size_t i, printed = 0;
char *expr = malloc(size);
if (expr) {
const char *or_and = "||", *eq_neq = "==";
char *e = expr;
if (!in) {
or_and = "&&";
eq_neq = "!=";
}
for (i = 0; i < nints; ++i) {
if (printed == size)
goto out_err_overflow;
if (i > 0)
printed += scnprintf(e + printed, size - printed, " %s ", or_and);
printed += scnprintf(e + printed, size - printed,
"%s %s %d", var, eq_neq, ints[i]);
}
}
return expr;
out_err_overflow:
free(expr);
return NULL;
}
/* Like strpbrk(), but not break if it is right after a backslash (escaped) */
char *strpbrk_esc(char *str, const char *stopset)
{
char *ptr;
do {
ptr = strpbrk(str, stopset);
if (ptr == str ||
(ptr == str + 1 && *(ptr - 1) != '\\'))
break;
str = ptr + 1;
} while (ptr && *(ptr - 1) == '\\' && *(ptr - 2) != '\\');
return ptr;
}
/* Like strdup, but do not copy a single backslash */
char *strdup_esc(const char *str)
{
char *s, *d, *p, *ret = strdup(str);
if (!ret)
return NULL;
d = strchr(ret, '\\');
if (!d)
return ret;
s = d + 1;
do {
if (*s == '\0') {
*d = '\0';
break;
}
p = strchr(s + 1, '\\');
if (p) {
memmove(d, s, p - s);
d += p - s;
s = p + 1;
} else
memmove(d, s, strlen(s) + 1);
} while (p);
return ret;
}