kernel_optimize_test/arch/arm/mach-kirkwood/pcie.c

289 lines
6.8 KiB
C
Raw Normal View History

/*
* arch/arm/mach-kirkwood/pcie.c
*
* PCIe functions for Marvell Kirkwood SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
#include "common.h"
void __init kirkwood_pcie_id(u32 *dev, u32 *rev)
{
*dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
*rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
}
struct pcie_port {
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
int irq;
struct resource res[2];
};
static int pcie_port_map[2];
static int num_pcie_ports;
static inline struct pcie_port *bus_to_port(struct pci_bus *bus)
{
struct pci_sys_data *sys = bus->sysdata;
return sys->private_data;
}
static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
{
/*
* Don't go out when trying to access --
* 1. nonexisting device on local bus
* 2. where there's no device connected (no link)
*/
if (bus == pp->root_bus_nr && dev == 0)
return 1;
if (!orion_pcie_link_up(pp->base))
return 0;
if (bus == pp->root_bus_nr && dev != 1)
return 0;
return 1;
}
/*
* PCIe config cycles are done by programming the PCIE_CONF_ADDR register
* and then reading the PCIE_CONF_DATA register. Need to make sure these
* transactions are atomic.
*/
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus_to_port(bus);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus_to_port(bus);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static struct pci_ops pcie_ops = {
.read = pcie_rd_conf,
.write = pcie_wr_conf,
};
static int __init pcie0_ioresources_setup(struct pci_sys_data *sys)
{
struct pcie_port *pp = (struct pcie_port *)sys->private_data;
/*
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 0 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe 0 IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
pp->res[1].name = "PCIe 0 MEM";
pp->res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe 0 Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
sys->io_offset = 0;
return 1;
}
static int __init pcie1_ioresources_setup(struct pci_sys_data *sys)
{
struct pcie_port *pp = (struct pcie_port *)sys->private_data;
/*
* IORESOURCE_IO
*/
pp->res[0].name = "PCIe 1 I/O Space";
pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
if (request_resource(&ioport_resource, &pp->res[0]))
panic("Request PCIe 1 IO resource failed\n");
sys->resource[0] = &pp->res[0];
/*
* IORESOURCE_MEM
*/
pp->res[1].name = "PCIe 1 MEM";
pp->res[1].start = KIRKWOOD_PCIE1_MEM_PHYS_BASE;
pp->res[1].end = pp->res[1].start + KIRKWOOD_PCIE1_MEM_SIZE - 1;
pp->res[1].flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pp->res[1]))
panic("Request PCIe 1 Memory resource failed\n");
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
sys->io_offset = 0;
return 1;
}
static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
extern unsigned int kirkwood_clk_ctrl;
struct pcie_port *pp;
int index;
if (nr >= num_pcie_ports)
return 0;
index = pcie_port_map[nr];
printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
panic("PCIe: failed to allocate pcie_port data");
sys->private_data = pp;
pp->root_bus_nr = sys->busnr;
spin_lock_init(&pp->conf_lock);
switch (index) {
case 0:
pp->base = (void __iomem *)PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
kirkwood_clk_ctrl |= CGC_PEX0;
pcie0_ioresources_setup(sys);
break;
case 1:
pp->base = (void __iomem *)PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
kirkwood_clk_ctrl |= CGC_PEX1;
pcie1_ioresources_setup(sys);
break;
default:
panic("PCIe setup: invalid controller");
}
/*
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
return 1;
}
static void __devinit rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.
*/
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
static struct pci_bus __init *
kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr < num_pcie_ports) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
} else {
bus = NULL;
BUG();
}
return bus;
}
static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus);
return pp->irq;
}
static struct hw_pci kirkwood_pci __initdata = {
.swizzle = pci_std_swizzle,
.setup = kirkwood_pcie_setup,
.scan = kirkwood_pcie_scan_bus,
.map_irq = kirkwood_pcie_map_irq,
};
static void __init add_pcie_port(int index, unsigned long base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up((void __iomem *)base)) {
printk(KERN_INFO "link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
printk(KERN_INFO "link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)
{
if (portmask & KW_PCIE0)
add_pcie_port(0, PCIE_VIRT_BASE);
if (portmask & KW_PCIE1)
add_pcie_port(1, PCIE1_VIRT_BASE);
kirkwood_pci.nr_controllers = num_pcie_ports;
pci_common_init(&kirkwood_pci);
}