AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
1b0e31861d
kernel_optimize_test/fs/crypto/hooks.c

353 lines
9.8 KiB
C
Raw Normal View History

treewide: Add SPDX license identifier for missed files Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:08:55 +08:00
// SPDX-License-Identifier: GPL-2.0-only
fscrypt: new helper function - fscrypt_file_open() Add a helper function which prepares to open a regular file which may be encrypted. It handles setting up the file's encryption key, then checking that the file's encryption policy matches that of its parent directory (if the parent directory is encrypted). It may be set as the ->open() method or it can be called from another ->open() method. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:40 +08:00
/*
* fs/crypto/hooks.c
*
* Encryption hooks for higher-level filesystem operations.
*/
fscrypt: derive dirhash key for casefolded directories When we allow indexed directories to use both encryption and casefolding, for the dirhash we can't just hash the ciphertext filenames that are stored on-disk (as is done currently) because the dirhash must be case insensitive, but the stored names are case-preserving. Nor can we hash the plaintext names with an unkeyed hash (or a hash keyed with a value stored on-disk like ext4's s_hash_seed), since that would leak information about the names that encryption is meant to protect. Instead, if we can accept a dirhash that's only computable when the fscrypt key is available, we can hash the plaintext names with a keyed hash using a secret key derived from the directory's fscrypt master key. We'll use SipHash-2-4 for this purpose. Prepare for this by deriving a SipHash key for each casefolded encrypted directory. Make sure to handle deriving the key not only when setting up the directory's fscrypt_info, but also in the case where the casefold flag is enabled after the fscrypt_info was already set up. (We could just always derive the key regardless of casefolding, but that would introduce unnecessary overhead for people not using casefolding.) Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, squashed with change that avoids unnecessarily deriving the key, and many other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:57 +08:00
#include <linux/key.h>
fscrypt: new helper function - fscrypt_file_open() Add a helper function which prepares to open a regular file which may be encrypted. It handles setting up the file's encryption key, then checking that the file's encryption policy matches that of its parent directory (if the parent directory is encrypted). It may be set as the ->open() method or it can be called from another ->open() method. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:40 +08:00
#include "fscrypt_private.h"
/**
fscrypt: fix all kerneldoc warnings Fix all kerneldoc warnings in fs/crypto/ and include/linux/fscrypt.h. Most of these were due to missing documentation for function parameters. Detected with: scripts/kernel-doc -v -none fs/crypto/*.{c,h} include/linux/fscrypt.h This cleanup makes it possible to check new patches for kerneldoc warnings without having to filter out all the existing ones. For consistency, also adjust some function "brief descriptions" to include the parentheses and to wrap at 80 characters. (The latter matches the checkpatch expectation.) Link: https://lore.kernel.org/r/20200511191358.53096-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 03:13:56 +08:00
* fscrypt_file_open() - prepare to open a possibly-encrypted regular file
fscrypt: new helper function - fscrypt_file_open() Add a helper function which prepares to open a regular file which may be encrypted. It handles setting up the file's encryption key, then checking that the file's encryption policy matches that of its parent directory (if the parent directory is encrypted). It may be set as the ->open() method or it can be called from another ->open() method. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:40 +08:00
* @inode: the inode being opened
* @filp: the struct file being set up
*
* Currently, an encrypted regular file can only be opened if its encryption key
* is available; access to the raw encrypted contents is not supported.
* Therefore, we first set up the inode's encryption key (if not already done)
* and return an error if it's unavailable.
*
* We also verify that if the parent directory (from the path via which the file
* is being opened) is encrypted, then the inode being opened uses the same
* encryption policy. This is needed as part of the enforcement that all files
* in an encrypted directory tree use the same encryption policy, as a
* protection against certain types of offline attacks. Note that this check is
* needed even when opening an *unencrypted* file, since it's forbidden to have
* an unencrypted file in an encrypted directory.
*
* Return: 0 on success, -ENOKEY if the key is missing, or another -errno code
*/
int fscrypt_file_open(struct inode *inode, struct file *filp)
{
int err;
struct dentry *dir;
err = fscrypt_require_key(inode);
if (err)
return err;
dir = dget_parent(file_dentry(filp));
if (IS_ENCRYPTED(d_inode(dir)) &&
!fscrypt_has_permitted_context(d_inode(dir), inode)) {
fscrypt: make fscrypt_msg() take inode instead of super_block Most of the warning and error messages in fs/crypto/ are for situations related to a specific inode, not merely to a super_block. So to make things easier, make fscrypt_msg() take an inode rather than a super_block, and make it print the inode number. Note: This is the same approach I'm taking for fsverity_msg(). Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-25 02:07:58 +08:00
fscrypt_warn(inode,
"Inconsistent encryption context (parent directory: %lu)",
d_inode(dir)->i_ino);
fscrypt: new helper function - fscrypt_file_open() Add a helper function which prepares to open a regular file which may be encrypted. It handles setting up the file's encryption key, then checking that the file's encryption policy matches that of its parent directory (if the parent directory is encrypted). It may be set as the ->open() method or it can be called from another ->open() method. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:40 +08:00
err = -EPERM;
}
dput(dir);
return err;
}
EXPORT_SYMBOL_GPL(fscrypt_file_open);
fscrypt: new helper function - fscrypt_prepare_link() Introduce a helper function which prepares to link an inode into a possibly-encrypted directory. It handles setting up the target directory's encryption key, then verifying that the link won't violate the constraint that all files in an encrypted directory tree use the same encryption policy. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:41 +08:00
fscrypt: fix race allowing rename() and link() of ciphertext dentries Close some race conditions where fscrypt allowed rename() and link() on ciphertext dentries that had been looked up just prior to the key being concurrently added. It's better to return -ENOKEY in this case. This avoids doing the nonsensical thing of encrypting the names a second time when searching for the actual on-disk dir entries. It also guarantees that DCACHE_ENCRYPTED_NAME dentries are never rename()d, so the dcache won't have support all possible combinations of moving DCACHE_ENCRYPTED_NAME around during __d_move(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:10 +08:00
int __fscrypt_prepare_link(struct inode *inode, struct inode *dir,
struct dentry *dentry)
fscrypt: new helper function - fscrypt_prepare_link() Introduce a helper function which prepares to link an inode into a possibly-encrypted directory. It handles setting up the target directory's encryption key, then verifying that the link won't violate the constraint that all files in an encrypted directory tree use the same encryption policy. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:41 +08:00
{
int err;
err = fscrypt_require_key(dir);
if (err)
return err;
fscrypt: fix race allowing rename() and link() of ciphertext dentries Close some race conditions where fscrypt allowed rename() and link() on ciphertext dentries that had been looked up just prior to the key being concurrently added. It's better to return -ENOKEY in this case. This avoids doing the nonsensical thing of encrypting the names a second time when searching for the actual on-disk dir entries. It also guarantees that DCACHE_ENCRYPTED_NAME dentries are never rename()d, so the dcache won't have support all possible combinations of moving DCACHE_ENCRYPTED_NAME around during __d_move(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:10 +08:00
/* ... in case we looked up ciphertext name before key was added */
if (dentry->d_flags & DCACHE_ENCRYPTED_NAME)
return -ENOKEY;
fscrypt: new helper function - fscrypt_prepare_link() Introduce a helper function which prepares to link an inode into a possibly-encrypted directory. It handles setting up the target directory's encryption key, then verifying that the link won't violate the constraint that all files in an encrypted directory tree use the same encryption policy. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:41 +08:00
if (!fscrypt_has_permitted_context(dir, inode))
fscrypt: return -EXDEV for incompatible rename or link into encrypted dir Currently, trying to rename or link a regular file, directory, or symlink into an encrypted directory fails with EPERM when the source file is unencrypted or is encrypted with a different encryption policy, and is on the same mountpoint. It is correct for the operation to fail, but the choice of EPERM breaks tools like 'mv' that know to copy rather than rename if they see EXDEV, but don't know what to do with EPERM. Our original motivation for EPERM was to encourage users to securely handle their data. Encrypting files by "moving" them into an encrypted directory can be insecure because the unencrypted data may remain in free space on disk, where it can later be recovered by an attacker. It's much better to encrypt the data from the start, or at least try to securely delete the source data e.g. using the 'shred' program. However, the current behavior hasn't been effective at achieving its goal because users tend to be confused, hack around it, and complain; see e.g. https://github.com/google/fscrypt/issues/76. And in some cases it's actually inconsistent or unnecessary. For example, 'mv'-ing files between differently encrypted directories doesn't work even in cases where it can be secure, such as when in userspace the same passphrase protects both directories. Yet, you *can* already 'mv' unencrypted files into an encrypted directory if the source files are on a different mountpoint, even though doing so is often insecure. There are probably better ways to teach users to securely handle their files. For example, the 'fscrypt' userspace tool could provide a command that migrates unencrypted files into an encrypted directory, acting like 'shred' on the source files and providing appropriate warnings depending on the type of the source filesystem and disk. Receiving errors on unimportant files might also force some users to disable encryption, thus making the behavior counterproductive. It's desirable to make encryption as unobtrusive as possible. Therefore, change the error code from EPERM to EXDEV so that tools looking for EXDEV will fall back to a copy. This, of course, doesn't prevent users from still doing the right things to securely manage their files. Note that this also matches the behavior when a file is renamed between two project quota hierarchies; so there's precedent for using EXDEV for things other than mountpoints. xfstests generic/398 will require an update with this change. [Rewritten from an earlier patch series by Michael Halcrow.] Cc: Michael Halcrow <mhalcrow@google.com> Cc: Joe Richey <joerichey@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 08:20:21 +08:00
return -EXDEV;
fscrypt: new helper function - fscrypt_prepare_link() Introduce a helper function which prepares to link an inode into a possibly-encrypted directory. It handles setting up the target directory's encryption key, then verifying that the link won't violate the constraint that all files in an encrypted directory tree use the same encryption policy. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:41 +08:00
return 0;
}
EXPORT_SYMBOL_GPL(__fscrypt_prepare_link);
fscrypt: new helper function - fscrypt_prepare_rename() Introduce a helper function which prepares to rename a file into a possibly encrypted directory. It handles loading the encryption keys for the source and target directories if needed, and it handles enforcing that if the target directory (and the source directory for a cross-rename) is encrypted, then the file being moved into the directory has the same encryption policy as its containing directory. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:42 +08:00
int __fscrypt_prepare_rename(struct inode *old_dir, struct dentry *old_dentry,
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags)
{
int err;
err = fscrypt_require_key(old_dir);
if (err)
return err;
err = fscrypt_require_key(new_dir);
if (err)
return err;
fscrypt: fix race allowing rename() and link() of ciphertext dentries Close some race conditions where fscrypt allowed rename() and link() on ciphertext dentries that had been looked up just prior to the key being concurrently added. It's better to return -ENOKEY in this case. This avoids doing the nonsensical thing of encrypting the names a second time when searching for the actual on-disk dir entries. It also guarantees that DCACHE_ENCRYPTED_NAME dentries are never rename()d, so the dcache won't have support all possible combinations of moving DCACHE_ENCRYPTED_NAME around during __d_move(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:10 +08:00
/* ... in case we looked up ciphertext name(s) before key was added */
if ((old_dentry->d_flags | new_dentry->d_flags) &
DCACHE_ENCRYPTED_NAME)
return -ENOKEY;
fscrypt: new helper function - fscrypt_prepare_rename() Introduce a helper function which prepares to rename a file into a possibly encrypted directory. It handles loading the encryption keys for the source and target directories if needed, and it handles enforcing that if the target directory (and the source directory for a cross-rename) is encrypted, then the file being moved into the directory has the same encryption policy as its containing directory. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:42 +08:00
if (old_dir != new_dir) {
if (IS_ENCRYPTED(new_dir) &&
!fscrypt_has_permitted_context(new_dir,
d_inode(old_dentry)))
fscrypt: return -EXDEV for incompatible rename or link into encrypted dir Currently, trying to rename or link a regular file, directory, or symlink into an encrypted directory fails with EPERM when the source file is unencrypted or is encrypted with a different encryption policy, and is on the same mountpoint. It is correct for the operation to fail, but the choice of EPERM breaks tools like 'mv' that know to copy rather than rename if they see EXDEV, but don't know what to do with EPERM. Our original motivation for EPERM was to encourage users to securely handle their data. Encrypting files by "moving" them into an encrypted directory can be insecure because the unencrypted data may remain in free space on disk, where it can later be recovered by an attacker. It's much better to encrypt the data from the start, or at least try to securely delete the source data e.g. using the 'shred' program. However, the current behavior hasn't been effective at achieving its goal because users tend to be confused, hack around it, and complain; see e.g. https://github.com/google/fscrypt/issues/76. And in some cases it's actually inconsistent or unnecessary. For example, 'mv'-ing files between differently encrypted directories doesn't work even in cases where it can be secure, such as when in userspace the same passphrase protects both directories. Yet, you *can* already 'mv' unencrypted files into an encrypted directory if the source files are on a different mountpoint, even though doing so is often insecure. There are probably better ways to teach users to securely handle their files. For example, the 'fscrypt' userspace tool could provide a command that migrates unencrypted files into an encrypted directory, acting like 'shred' on the source files and providing appropriate warnings depending on the type of the source filesystem and disk. Receiving errors on unimportant files might also force some users to disable encryption, thus making the behavior counterproductive. It's desirable to make encryption as unobtrusive as possible. Therefore, change the error code from EPERM to EXDEV so that tools looking for EXDEV will fall back to a copy. This, of course, doesn't prevent users from still doing the right things to securely manage their files. Note that this also matches the behavior when a file is renamed between two project quota hierarchies; so there's precedent for using EXDEV for things other than mountpoints. xfstests generic/398 will require an update with this change. [Rewritten from an earlier patch series by Michael Halcrow.] Cc: Michael Halcrow <mhalcrow@google.com> Cc: Joe Richey <joerichey@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 08:20:21 +08:00
return -EXDEV;
fscrypt: new helper function - fscrypt_prepare_rename() Introduce a helper function which prepares to rename a file into a possibly encrypted directory. It handles loading the encryption keys for the source and target directories if needed, and it handles enforcing that if the target directory (and the source directory for a cross-rename) is encrypted, then the file being moved into the directory has the same encryption policy as its containing directory. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:42 +08:00
if ((flags & RENAME_EXCHANGE) &&
IS_ENCRYPTED(old_dir) &&
!fscrypt_has_permitted_context(old_dir,
d_inode(new_dentry)))
fscrypt: return -EXDEV for incompatible rename or link into encrypted dir Currently, trying to rename or link a regular file, directory, or symlink into an encrypted directory fails with EPERM when the source file is unencrypted or is encrypted with a different encryption policy, and is on the same mountpoint. It is correct for the operation to fail, but the choice of EPERM breaks tools like 'mv' that know to copy rather than rename if they see EXDEV, but don't know what to do with EPERM. Our original motivation for EPERM was to encourage users to securely handle their data. Encrypting files by "moving" them into an encrypted directory can be insecure because the unencrypted data may remain in free space on disk, where it can later be recovered by an attacker. It's much better to encrypt the data from the start, or at least try to securely delete the source data e.g. using the 'shred' program. However, the current behavior hasn't been effective at achieving its goal because users tend to be confused, hack around it, and complain; see e.g. https://github.com/google/fscrypt/issues/76. And in some cases it's actually inconsistent or unnecessary. For example, 'mv'-ing files between differently encrypted directories doesn't work even in cases where it can be secure, such as when in userspace the same passphrase protects both directories. Yet, you *can* already 'mv' unencrypted files into an encrypted directory if the source files are on a different mountpoint, even though doing so is often insecure. There are probably better ways to teach users to securely handle their files. For example, the 'fscrypt' userspace tool could provide a command that migrates unencrypted files into an encrypted directory, acting like 'shred' on the source files and providing appropriate warnings depending on the type of the source filesystem and disk. Receiving errors on unimportant files might also force some users to disable encryption, thus making the behavior counterproductive. It's desirable to make encryption as unobtrusive as possible. Therefore, change the error code from EPERM to EXDEV so that tools looking for EXDEV will fall back to a copy. This, of course, doesn't prevent users from still doing the right things to securely manage their files. Note that this also matches the behavior when a file is renamed between two project quota hierarchies; so there's precedent for using EXDEV for things other than mountpoints. xfstests generic/398 will require an update with this change. [Rewritten from an earlier patch series by Michael Halcrow.] Cc: Michael Halcrow <mhalcrow@google.com> Cc: Joe Richey <joerichey@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-01-23 08:20:21 +08:00
return -EXDEV;
fscrypt: new helper function - fscrypt_prepare_rename() Introduce a helper function which prepares to rename a file into a possibly encrypted directory. It handles loading the encryption keys for the source and target directories if needed, and it handles enforcing that if the target directory (and the source directory for a cross-rename) is encrypted, then the file being moved into the directory has the same encryption policy as its containing directory. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:42 +08:00
}
return 0;
}
EXPORT_SYMBOL_GPL(__fscrypt_prepare_rename);
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
int __fscrypt_prepare_lookup(struct inode *dir, struct dentry *dentry,
struct fscrypt_name *fname)
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
{
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
int err = fscrypt_setup_filename(dir, &dentry->d_name, 1, fname);
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
if (err && err != -ENOENT)
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
return err;
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
if (fname->is_ciphertext_name) {
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
spin_lock(&dentry->d_lock);
fscrypt: clean up and improve dentry revalidation Make various improvements to fscrypt dentry revalidation: - Don't try to handle the case where the per-directory key is removed, as this can't happen without the inode (and dentries) being evicted. - Flag ciphertext dentries rather than plaintext dentries, since it's ciphertext dentries that need the special handling. - Avoid doing unnecessary work for non-ciphertext dentries. - When revalidating ciphertext dentries, try to set up the directory's i_crypt_info to make sure the key is really still absent, rather than invalidating all negative dentries as the previous code did. An old comment suggested we can't do this for locking reasons, but AFAICT this comment was outdated and it actually works fine. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:09 +08:00
dentry->d_flags |= DCACHE_ENCRYPTED_NAME;
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
spin_unlock(&dentry->d_lock);
fscrypt: only set dentry_operations on ciphertext dentries Plaintext dentries are always valid, so only set fscrypt_d_ops on ciphertext dentries. Besides marginally improved performance, this allows overlayfs to use an fscrypt-encrypted upperdir, provided that all the following are true: (1) The fscrypt encryption key is placed in the keyring before mounting overlayfs, and remains while the overlayfs is mounted. (2) The overlayfs workdir uses the same encryption policy. (3) No dentries for the ciphertext names of subdirectories have been created in the upperdir or workdir yet. (Since otherwise d_splice_alias() will reuse the old dentry with ->d_op set.) One potential use case is using an ephemeral encryption key to encrypt all files created or changed by a container, so that they can be securely erased ("crypto-shredded") after the container stops. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:12 +08:00
d_set_d_op(dentry, &fscrypt_d_ops);
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
}
fscrypt: fix race where ->lookup() marks plaintext dentry as ciphertext ->lookup() in an encrypted directory begins as follows: 1. fscrypt_prepare_lookup(): a. Try to load the directory's encryption key. b. If the key is unavailable, mark the dentry as a ciphertext name via d_flags. 2. fscrypt_setup_filename(): a. Try to load the directory's encryption key. b. If the key is available, encrypt the name (treated as a plaintext name) to get the on-disk name. Otherwise decode the name (treated as a ciphertext name) to get the on-disk name. But if the key is concurrently added, it may be found at (2a) but not at (1a). In this case, the dentry will be wrongly marked as a ciphertext name even though it was actually treated as plaintext. This will cause the dentry to be wrongly invalidated on the next lookup, potentially causing problems. For example, if the racy ->lookup() was part of sys_mount(), then the new mount will be detached when anything tries to access it. This is despite the mountpoint having a plaintext path, which should remain valid now that the key was added. Of course, this is only possible if there's a userspace race. Still, the additional kernel-side race is confusing and unexpected. Close the kernel-side race by changing fscrypt_prepare_lookup() to also set the on-disk filename (step 2b), consistent with the d_flags update. Fixes: 28b4c263961c ("ext4 crypto: revalidate dentry after adding or removing the key") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-03-21 02:39:13 +08:00
return err;
fscrypt: new helper function - fscrypt_prepare_lookup() Introduce a helper function which prepares to look up the given dentry in the given directory. If the directory is encrypted, it handles loading the directory's encryption key, setting the dentry's ->d_op to fscrypt_d_ops, and setting DCACHE_ENCRYPTED_WITH_KEY if the directory's encryption key is available. Note: once all filesystems switch over to this, we'll be able to move fscrypt_d_ops and fscrypt_set_encrypted_dentry() to fscrypt_private.h. Acked-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-10-10 03:15:43 +08:00
}
EXPORT_SYMBOL_GPL(__fscrypt_prepare_lookup);
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
fscrypt: don't allow v1 policies with casefolding Casefolded encrypted directories will use a new dirhash method that requires a secret key. If the directory uses a v2 encryption policy, it's easy to derive this key from the master key using HKDF. However, v1 encryption policies don't provide a way to derive additional keys. Therefore, don't allow casefolding on directories that use a v1 policy. Specifically, make it so that trying to enable casefolding on a directory that has a v1 policy fails, trying to set a v1 policy on a casefolded directory fails, and trying to open a casefolded directory that has a v1 policy (if one somehow exists on-disk) fails. Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, and other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:56 +08:00
/**
* fscrypt_prepare_setflags() - prepare to change flags with FS_IOC_SETFLAGS
* @inode: the inode on which flags are being changed
* @oldflags: the old flags
* @flags: the new flags
*
* The caller should be holding i_rwsem for write.
*
* Return: 0 on success; -errno if the flags change isn't allowed or if
* another error occurs.
*/
int fscrypt_prepare_setflags(struct inode *inode,
unsigned int oldflags, unsigned int flags)
{
struct fscrypt_info *ci;
fscrypt: derive dirhash key for casefolded directories When we allow indexed directories to use both encryption and casefolding, for the dirhash we can't just hash the ciphertext filenames that are stored on-disk (as is done currently) because the dirhash must be case insensitive, but the stored names are case-preserving. Nor can we hash the plaintext names with an unkeyed hash (or a hash keyed with a value stored on-disk like ext4's s_hash_seed), since that would leak information about the names that encryption is meant to protect. Instead, if we can accept a dirhash that's only computable when the fscrypt key is available, we can hash the plaintext names with a keyed hash using a secret key derived from the directory's fscrypt master key. We'll use SipHash-2-4 for this purpose. Prepare for this by deriving a SipHash key for each casefolded encrypted directory. Make sure to handle deriving the key not only when setting up the directory's fscrypt_info, but also in the case where the casefold flag is enabled after the fscrypt_info was already set up. (We could just always derive the key regardless of casefolding, but that would introduce unnecessary overhead for people not using casefolding.) Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, squashed with change that avoids unnecessarily deriving the key, and many other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:57 +08:00
struct fscrypt_master_key *mk;
fscrypt: don't allow v1 policies with casefolding Casefolded encrypted directories will use a new dirhash method that requires a secret key. If the directory uses a v2 encryption policy, it's easy to derive this key from the master key using HKDF. However, v1 encryption policies don't provide a way to derive additional keys. Therefore, don't allow casefolding on directories that use a v1 policy. Specifically, make it so that trying to enable casefolding on a directory that has a v1 policy fails, trying to set a v1 policy on a casefolded directory fails, and trying to open a casefolded directory that has a v1 policy (if one somehow exists on-disk) fails. Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, and other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:56 +08:00
int err;
fscrypt: derive dirhash key for casefolded directories When we allow indexed directories to use both encryption and casefolding, for the dirhash we can't just hash the ciphertext filenames that are stored on-disk (as is done currently) because the dirhash must be case insensitive, but the stored names are case-preserving. Nor can we hash the plaintext names with an unkeyed hash (or a hash keyed with a value stored on-disk like ext4's s_hash_seed), since that would leak information about the names that encryption is meant to protect. Instead, if we can accept a dirhash that's only computable when the fscrypt key is available, we can hash the plaintext names with a keyed hash using a secret key derived from the directory's fscrypt master key. We'll use SipHash-2-4 for this purpose. Prepare for this by deriving a SipHash key for each casefolded encrypted directory. Make sure to handle deriving the key not only when setting up the directory's fscrypt_info, but also in the case where the casefold flag is enabled after the fscrypt_info was already set up. (We could just always derive the key regardless of casefolding, but that would introduce unnecessary overhead for people not using casefolding.) Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, squashed with change that avoids unnecessarily deriving the key, and many other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:57 +08:00
/*
* When the CASEFOLD flag is set on an encrypted directory, we must
* derive the secret key needed for the dirhash. This is only possible
* if the directory uses a v2 encryption policy.
*/
fscrypt: don't allow v1 policies with casefolding Casefolded encrypted directories will use a new dirhash method that requires a secret key. If the directory uses a v2 encryption policy, it's easy to derive this key from the master key using HKDF. However, v1 encryption policies don't provide a way to derive additional keys. Therefore, don't allow casefolding on directories that use a v1 policy. Specifically, make it so that trying to enable casefolding on a directory that has a v1 policy fails, trying to set a v1 policy on a casefolded directory fails, and trying to open a casefolded directory that has a v1 policy (if one somehow exists on-disk) fails. Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, and other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:56 +08:00
if (IS_ENCRYPTED(inode) && (flags & ~oldflags & FS_CASEFOLD_FL)) {
err = fscrypt_require_key(inode);
if (err)
return err;
ci = inode->i_crypt_info;
if (ci->ci_policy.version != FSCRYPT_POLICY_V2)
return -EINVAL;
fscrypt: derive dirhash key for casefolded directories When we allow indexed directories to use both encryption and casefolding, for the dirhash we can't just hash the ciphertext filenames that are stored on-disk (as is done currently) because the dirhash must be case insensitive, but the stored names are case-preserving. Nor can we hash the plaintext names with an unkeyed hash (or a hash keyed with a value stored on-disk like ext4's s_hash_seed), since that would leak information about the names that encryption is meant to protect. Instead, if we can accept a dirhash that's only computable when the fscrypt key is available, we can hash the plaintext names with a keyed hash using a secret key derived from the directory's fscrypt master key. We'll use SipHash-2-4 for this purpose. Prepare for this by deriving a SipHash key for each casefolded encrypted directory. Make sure to handle deriving the key not only when setting up the directory's fscrypt_info, but also in the case where the casefold flag is enabled after the fscrypt_info was already set up. (We could just always derive the key regardless of casefolding, but that would introduce unnecessary overhead for people not using casefolding.) Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, squashed with change that avoids unnecessarily deriving the key, and many other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-3-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:57 +08:00
mk = ci->ci_master_key->payload.data[0];
down_read(&mk->mk_secret_sem);
if (is_master_key_secret_present(&mk->mk_secret))
err = fscrypt_derive_dirhash_key(ci, mk);
else
err = -ENOKEY;
up_read(&mk->mk_secret_sem);
return err;
fscrypt: don't allow v1 policies with casefolding Casefolded encrypted directories will use a new dirhash method that requires a secret key. If the directory uses a v2 encryption policy, it's easy to derive this key from the master key using HKDF. However, v1 encryption policies don't provide a way to derive additional keys. Therefore, don't allow casefolding on directories that use a v1 policy. Specifically, make it so that trying to enable casefolding on a directory that has a v1 policy fails, trying to set a v1 policy on a casefolded directory fails, and trying to open a casefolded directory that has a v1 policy (if one somehow exists on-disk) fails. Signed-off-by: Daniel Rosenberg <drosen@google.com> [EB: improved commit message, updated fscrypt.rst, and other cleanups] Link: https://lore.kernel.org/r/20200120223201.241390-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-21 06:31:56 +08:00
}
return 0;
}
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
int __fscrypt_prepare_symlink(struct inode *dir, unsigned int len,
unsigned int max_len,
struct fscrypt_str *disk_link)
{
int err;
/*
* To calculate the size of the encrypted symlink target we need to know
* the amount of NUL padding, which is determined by the flags set in
* the encryption policy which will be inherited from the directory.
* The easiest way to get access to this is to just load the directory's
* fscrypt_info, since we'll need it to create the dir_entry anyway.
*
* Note: in test_dummy_encryption mode, @dir may be unencrypted.
*/
err = fscrypt_get_encryption_info(dir);
if (err)
return err;
if (!fscrypt_has_encryption_key(dir))
return -ENOKEY;
/*
* Calculate the size of the encrypted symlink and verify it won't
* exceed max_len. Note that for historical reasons, encrypted symlink
* targets are prefixed with the ciphertext length, despite this
* actually being redundant with i_size. This decreases by 2 bytes the
* longest symlink target we can accept.
*
* We could recover 1 byte by not counting a null terminator, but
* counting it (even though it is meaningless for ciphertext) is simpler
* for now since filesystems will assume it is there and subtract it.
*/
fscrypt: fix up fscrypt_fname_encrypted_size() for internal use Filesystems don't need fscrypt_fname_encrypted_size() anymore, so unexport it and move it to fscrypt_private.h. We also never calculate the encrypted size of a filename without having the fscrypt_info present since it is needed to know the amount of NUL-padding which is determined by the encryption policy, and also we will always truncate the NUL-padding to the maximum filename length. Therefore, also make fscrypt_fname_encrypted_size() assume that the fscrypt_info is present, and make it truncate the returned length to the specified max_len. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-12 12:30:08 +08:00
if (!fscrypt_fname_encrypted_size(dir, len,
max_len - sizeof(struct fscrypt_symlink_data),
&disk_link->len))
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
return -ENAMETOOLONG;
fscrypt: fix up fscrypt_fname_encrypted_size() for internal use Filesystems don't need fscrypt_fname_encrypted_size() anymore, so unexport it and move it to fscrypt_private.h. We also never calculate the encrypted size of a filename without having the fscrypt_info present since it is needed to know the amount of NUL-padding which is determined by the encryption policy, and also we will always truncate the NUL-padding to the maximum filename length. Therefore, also make fscrypt_fname_encrypted_size() assume that the fscrypt_info is present, and make it truncate the returned length to the specified max_len. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-12 12:30:08 +08:00
disk_link->len += sizeof(struct fscrypt_symlink_data);
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
disk_link->name = NULL;
return 0;
}
EXPORT_SYMBOL_GPL(__fscrypt_prepare_symlink);
int __fscrypt_encrypt_symlink(struct inode *inode, const char *target,
unsigned int len, struct fscrypt_str *disk_link)
{
int err;
fscrypt: fix build with pre-4.6 gcc versions gcc versions prior to 4.6 require an extra level of braces when using a designated initializer for a member in an anonymous struct or union. This caused a compile error with the 'struct qstr' initialization in __fscrypt_encrypt_symlink(). Fix it by using QSTR_INIT(). Reported-by: Andrew Morton <akpm@linux-foundation.org> Fixes: 76e81d6d5048 ("fscrypt: new helper functions for ->symlink()") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-20 05:45:24 +08:00
struct qstr iname = QSTR_INIT(target, len);
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
struct fscrypt_symlink_data *sd;
unsigned int ciphertext_len;
err = fscrypt_require_key(inode);
if (err)
return err;
if (disk_link->name) {
/* filesystem-provided buffer */
sd = (struct fscrypt_symlink_data *)disk_link->name;
} else {
sd = kmalloc(disk_link->len, GFP_NOFS);
if (!sd)
return -ENOMEM;
}
ciphertext_len = disk_link->len - sizeof(*sd);
sd->len = cpu_to_le16(ciphertext_len);
fscrypt: add "fscrypt_" prefix to fname_encrypt() fname_encrypt() is a global function, due to being used in both fname.c and hooks.c. So it should be prefixed with "fscrypt_", like all the other global functions in fs/crypto/. Link: https://lore.kernel.org/r/20200120071736.45915-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-20 15:17:36 +08:00
err = fscrypt_fname_encrypt(inode, &iname, sd->encrypted_path,
ciphertext_len);
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
if (err)
goto err_free_sd;
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
/*
* Null-terminating the ciphertext doesn't make sense, but we still
* count the null terminator in the length, so we might as well
* initialize it just in case the filesystem writes it out.
*/
sd->encrypted_path[ciphertext_len] = '\0';
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
/* Cache the plaintext symlink target for later use by get_link() */
err = -ENOMEM;
inode->i_link = kmemdup(target, len + 1, GFP_NOFS);
if (!inode->i_link)
goto err_free_sd;
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
if (!disk_link->name)
disk_link->name = (unsigned char *)sd;
return 0;
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
err_free_sd:
if (!disk_link->name)
kfree(sd);
return err;
fscrypt: new helper functions for ->symlink() Currently, filesystems supporting fscrypt need to implement some tricky logic when creating encrypted symlinks, including handling a peculiar on-disk format (struct fscrypt_symlink_data) and correctly calculating the size of the encrypted symlink. Introduce helper functions to make things a bit easier: - fscrypt_prepare_symlink() computes and validates the size the symlink target will require on-disk. - fscrypt_encrypt_symlink() creates the encrypted target if needed. The new helpers actually fix some subtle bugs. First, when checking whether the symlink target was too long, filesystems didn't account for the fact that the NUL padding is meant to be truncated if it would cause the maximum length to be exceeded, as is done for filenames in directories. Consequently users would receive ENAMETOOLONG when creating symlinks close to what is supposed to be the maximum length. For example, with EXT4 with a 4K block size, the maximum symlink target length in an encrypted directory is supposed to be 4093 bytes (in comparison to 4095 in an unencrypted directory), but in FS_POLICY_FLAGS_PAD_32-mode only up to 4064 bytes were accepted. Second, symlink targets of "." and ".." were not being encrypted, even though they should be, as these names are special in *directory entries* but not in symlink targets. Fortunately, we can fix this simply by starting to encrypt them, as old kernels already accept them in encrypted form. Third, the output string length the filesystems were providing when doing the actual encryption was incorrect, as it was forgotten to exclude 'sizeof(struct fscrypt_symlink_data)'. Fortunately though, this bug didn't make a difference. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:01 +08:00
}
EXPORT_SYMBOL_GPL(__fscrypt_encrypt_symlink);
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
/**
fscrypt: fix all kerneldoc warnings Fix all kerneldoc warnings in fs/crypto/ and include/linux/fscrypt.h. Most of these were due to missing documentation for function parameters. Detected with: scripts/kernel-doc -v -none fs/crypto/*.{c,h} include/linux/fscrypt.h This cleanup makes it possible to check new patches for kerneldoc warnings without having to filter out all the existing ones. For consistency, also adjust some function "brief descriptions" to include the parentheses and to wrap at 80 characters. (The latter matches the checkpatch expectation.) Link: https://lore.kernel.org/r/20200511191358.53096-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 03:13:56 +08:00
* fscrypt_get_symlink() - get the target of an encrypted symlink
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
* @inode: the symlink inode
* @caddr: the on-disk contents of the symlink
* @max_size: size of @caddr buffer
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
* @done: if successful, will be set up to free the returned target if needed
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
*
* If the symlink's encryption key is available, we decrypt its target.
* Otherwise, we encode its target for presentation.
*
* This may sleep, so the filesystem must have dropped out of RCU mode already.
*
* Return: the presentable symlink target or an ERR_PTR()
*/
const char *fscrypt_get_symlink(struct inode *inode, const void *caddr,
unsigned int max_size,
struct delayed_call *done)
{
const struct fscrypt_symlink_data *sd;
struct fscrypt_str cstr, pstr;
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
bool has_key;
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
int err;
/* This is for encrypted symlinks only */
if (WARN_ON(!IS_ENCRYPTED(inode)))
return ERR_PTR(-EINVAL);
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
/* If the decrypted target is already cached, just return it. */
pstr.name = READ_ONCE(inode->i_link);
if (pstr.name)
return pstr.name;
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
/*
* Try to set up the symlink's encryption key, but we can continue
* regardless of whether the key is available or not.
*/
err = fscrypt_get_encryption_info(inode);
if (err)
return ERR_PTR(err);
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
has_key = fscrypt_has_encryption_key(inode);
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
/*
* For historical reasons, encrypted symlink targets are prefixed with
* the ciphertext length, even though this is redundant with i_size.
*/
if (max_size < sizeof(*sd))
return ERR_PTR(-EUCLEAN);
sd = caddr;
cstr.name = (unsigned char *)sd->encrypted_path;
cstr.len = le16_to_cpu(sd->len);
if (cstr.len == 0)
return ERR_PTR(-EUCLEAN);
if (cstr.len + sizeof(*sd) - 1 > max_size)
return ERR_PTR(-EUCLEAN);
err = fscrypt_fname_alloc_buffer(inode, cstr.len, &pstr);
if (err)
return ERR_PTR(err);
err = fscrypt_fname_disk_to_usr(inode, 0, 0, &cstr, &pstr);
if (err)
goto err_kfree;
err = -EUCLEAN;
if (pstr.name[0] == '\0')
goto err_kfree;
pstr.name[pstr.len] = '\0';
fscrypt: cache decrypted symlink target in ->i_link Path lookups that traverse encrypted symlink(s) are very slow because each encrypted symlink needs to be decrypted each time it's followed. This also involves dropping out of rcu-walk mode. Make encrypted symlinks faster by caching the decrypted symlink target in ->i_link. The first call to fscrypt_get_symlink() sets it. Then, the existing VFS path lookup code uses the non-NULL ->i_link to take the fast path where ->get_link() isn't called, and lookups in rcu-walk mode remain in rcu-walk mode. Also set ->i_link immediately when a new encrypted symlink is created. To safely free the symlink target after an RCU grace period has elapsed, introduce a new function fscrypt_free_inode(), and make the relevant filesystems call it just before actually freeing the inode. Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-04-11 04:21:15 +08:00
/*
* Cache decrypted symlink targets in i_link for later use. Don't cache
* symlink targets encoded without the key, since those become outdated
* once the key is added. This pairs with the READ_ONCE() above and in
* the VFS path lookup code.
*/
if (!has_key ||
cmpxchg_release(&inode->i_link, NULL, pstr.name) != NULL)
set_delayed_call(done, kfree_link, pstr.name);
fscrypt: new helper function - fscrypt_get_symlink() Filesystems also have duplicate code to support ->get_link() on encrypted symlinks. Factor it out into a new function fscrypt_get_symlink(). It takes in the contents of the encrypted symlink on-disk and provides the target (decrypted or encoded) that should be returned from ->get_link(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-01-06 02:45:02 +08:00
return pstr.name;
err_kfree:
kfree(pstr.name);
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(fscrypt_get_symlink);
Copy Permalink