kernel_optimize_test/fs/ext3/namei.c

2585 lines
69 KiB
C
Raw Normal View History

/*
* linux/fs/ext3/namei.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/namei.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
* Directory entry file type support and forward compatibility hooks
* for B-tree directories by Theodore Ts'o (tytso@mit.edu), 1998
* Hash Tree Directory indexing (c)
* Daniel Phillips, 2001
* Hash Tree Directory indexing porting
* Christopher Li, 2002
* Hash Tree Directory indexing cleanup
* Theodore Ts'o, 2002
*/
#include <linux/quotaops.h>
#include "ext3.h"
#include "namei.h"
#include "xattr.h"
#include "acl.h"
/*
* define how far ahead to read directories while searching them.
*/
#define NAMEI_RA_CHUNKS 2
#define NAMEI_RA_BLOCKS 4
#define NAMEI_RA_SIZE (NAMEI_RA_CHUNKS * NAMEI_RA_BLOCKS)
static struct buffer_head *ext3_append(handle_t *handle,
struct inode *inode,
u32 *block, int *err)
{
struct buffer_head *bh;
*block = inode->i_size >> inode->i_sb->s_blocksize_bits;
if ((bh = ext3_dir_bread(handle, inode, *block, 1, err))) {
inode->i_size += inode->i_sb->s_blocksize;
EXT3_I(inode)->i_disksize = inode->i_size;
*err = ext3_journal_get_write_access(handle, bh);
if (*err) {
brelse(bh);
bh = NULL;
}
}
return bh;
}
#ifndef assert
#define assert(test) J_ASSERT(test)
#endif
#ifdef DX_DEBUG
#define dxtrace(command) command
#else
#define dxtrace(command)
#endif
struct fake_dirent
{
__le32 inode;
__le16 rec_len;
u8 name_len;
u8 file_type;
};
struct dx_countlimit
{
__le16 limit;
__le16 count;
};
struct dx_entry
{
__le32 hash;
__le32 block;
};
/*
* dx_root_info is laid out so that if it should somehow get overlaid by a
* dirent the two low bits of the hash version will be zero. Therefore, the
* hash version mod 4 should never be 0. Sincerely, the paranoia department.
*/
struct dx_root
{
struct fake_dirent dot;
char dot_name[4];
struct fake_dirent dotdot;
char dotdot_name[4];
struct dx_root_info
{
__le32 reserved_zero;
u8 hash_version;
u8 info_length; /* 8 */
u8 indirect_levels;
u8 unused_flags;
}
info;
struct dx_entry entries[0];
};
struct dx_node
{
struct fake_dirent fake;
struct dx_entry entries[0];
};
struct dx_frame
{
struct buffer_head *bh;
struct dx_entry *entries;
struct dx_entry *at;
};
struct dx_map_entry
{
u32 hash;
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
u16 offs;
u16 size;
};
static inline unsigned dx_get_block (struct dx_entry *entry);
static void dx_set_block (struct dx_entry *entry, unsigned value);
static inline unsigned dx_get_hash (struct dx_entry *entry);
static void dx_set_hash (struct dx_entry *entry, unsigned value);
static unsigned dx_get_count (struct dx_entry *entries);
static unsigned dx_get_limit (struct dx_entry *entries);
static void dx_set_count (struct dx_entry *entries, unsigned value);
static void dx_set_limit (struct dx_entry *entries, unsigned value);
static unsigned dx_root_limit (struct inode *dir, unsigned infosize);
static unsigned dx_node_limit (struct inode *dir);
static struct dx_frame *dx_probe(struct qstr *entry,
struct inode *dir,
struct dx_hash_info *hinfo,
struct dx_frame *frame,
int *err);
static void dx_release (struct dx_frame *frames);
static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize,
struct dx_hash_info *hinfo, struct dx_map_entry map[]);
static void dx_sort_map(struct dx_map_entry *map, unsigned count);
static struct ext3_dir_entry_2 *dx_move_dirents (char *from, char *to,
struct dx_map_entry *offsets, int count);
static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize);
static void dx_insert_block (struct dx_frame *frame, u32 hash, u32 block);
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
struct dx_frame *frames,
__u32 *start_hash);
static struct buffer_head * ext3_dx_find_entry(struct inode *dir,
struct qstr *entry, struct ext3_dir_entry_2 **res_dir,
int *err);
static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry,
struct inode *inode);
/*
* p is at least 6 bytes before the end of page
*/
static inline struct ext3_dir_entry_2 *
ext3_next_entry(struct ext3_dir_entry_2 *p)
{
return (struct ext3_dir_entry_2 *)((char *)p +
ext3_rec_len_from_disk(p->rec_len));
}
/*
* Future: use high four bits of block for coalesce-on-delete flags
* Mask them off for now.
*/
static inline unsigned dx_get_block (struct dx_entry *entry)
{
return le32_to_cpu(entry->block) & 0x00ffffff;
}
static inline void dx_set_block (struct dx_entry *entry, unsigned value)
{
entry->block = cpu_to_le32(value);
}
static inline unsigned dx_get_hash (struct dx_entry *entry)
{
return le32_to_cpu(entry->hash);
}
static inline void dx_set_hash (struct dx_entry *entry, unsigned value)
{
entry->hash = cpu_to_le32(value);
}
static inline unsigned dx_get_count (struct dx_entry *entries)
{
return le16_to_cpu(((struct dx_countlimit *) entries)->count);
}
static inline unsigned dx_get_limit (struct dx_entry *entries)
{
return le16_to_cpu(((struct dx_countlimit *) entries)->limit);
}
static inline void dx_set_count (struct dx_entry *entries, unsigned value)
{
((struct dx_countlimit *) entries)->count = cpu_to_le16(value);
}
static inline void dx_set_limit (struct dx_entry *entries, unsigned value)
{
((struct dx_countlimit *) entries)->limit = cpu_to_le16(value);
}
static inline unsigned dx_root_limit (struct inode *dir, unsigned infosize)
{
unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(1) -
EXT3_DIR_REC_LEN(2) - infosize;
return entry_space / sizeof(struct dx_entry);
}
static inline unsigned dx_node_limit (struct inode *dir)
{
unsigned entry_space = dir->i_sb->s_blocksize - EXT3_DIR_REC_LEN(0);
return entry_space / sizeof(struct dx_entry);
}
/*
* Debug
*/
#ifdef DX_DEBUG
static void dx_show_index (char * label, struct dx_entry *entries)
{
int i, n = dx_get_count (entries);
printk("%s index ", label);
for (i = 0; i < n; i++)
{
printk("%x->%u ", i? dx_get_hash(entries + i): 0, dx_get_block(entries + i));
}
printk("\n");
}
struct stats
{
unsigned names;
unsigned space;
unsigned bcount;
};
static struct stats dx_show_leaf(struct dx_hash_info *hinfo, struct ext3_dir_entry_2 *de,
int size, int show_names)
{
unsigned names = 0, space = 0;
char *base = (char *) de;
struct dx_hash_info h = *hinfo;
printk("names: ");
while ((char *) de < base + size)
{
if (de->inode)
{
if (show_names)
{
int len = de->name_len;
char *name = de->name;
while (len--) printk("%c", *name++);
ext3fs_dirhash(de->name, de->name_len, &h);
printk(":%x.%u ", h.hash,
(unsigned) ((char *) de - base));
}
space += EXT3_DIR_REC_LEN(de->name_len);
names++;
}
de = ext3_next_entry(de);
}
printk("(%i)\n", names);
return (struct stats) { names, space, 1 };
}
struct stats dx_show_entries(struct dx_hash_info *hinfo, struct inode *dir,
struct dx_entry *entries, int levels)
{
unsigned blocksize = dir->i_sb->s_blocksize;
unsigned count = dx_get_count (entries), names = 0, space = 0, i;
unsigned bcount = 0;
struct buffer_head *bh;
int err;
printk("%i indexed blocks...\n", count);
for (i = 0; i < count; i++, entries++)
{
u32 block = dx_get_block(entries), hash = i? dx_get_hash(entries): 0;
u32 range = i < count - 1? (dx_get_hash(entries + 1) - hash): ~hash;
struct stats stats;
printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range);
if (!(bh = ext3_bread (NULL,dir, block, 0,&err))) continue;
stats = levels?
dx_show_entries(hinfo, dir, ((struct dx_node *) bh->b_data)->entries, levels - 1):
dx_show_leaf(hinfo, (struct ext3_dir_entry_2 *) bh->b_data, blocksize, 0);
names += stats.names;
space += stats.space;
bcount += stats.bcount;
brelse (bh);
}
if (bcount)
printk("%snames %u, fullness %u (%u%%)\n", levels?"":" ",
names, space/bcount,(space/bcount)*100/blocksize);
return (struct stats) { names, space, bcount};
}
#endif /* DX_DEBUG */
/*
* Probe for a directory leaf block to search.
*
* dx_probe can return ERR_BAD_DX_DIR, which means there was a format
* error in the directory index, and the caller should fall back to
* searching the directory normally. The callers of dx_probe **MUST**
* check for this error code, and make sure it never gets reflected
* back to userspace.
*/
static struct dx_frame *
dx_probe(struct qstr *entry, struct inode *dir,
struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err)
{
unsigned count, indirect;
struct dx_entry *at, *entries, *p, *q, *m;
struct dx_root *root;
struct buffer_head *bh;
struct dx_frame *frame = frame_in;
u32 hash;
frame->bh = NULL;
if (!(bh = ext3_dir_bread(NULL, dir, 0, 0, err))) {
*err = ERR_BAD_DX_DIR;
goto fail;
}
root = (struct dx_root *) bh->b_data;
if (root->info.hash_version != DX_HASH_TEA &&
root->info.hash_version != DX_HASH_HALF_MD4 &&
root->info.hash_version != DX_HASH_LEGACY) {
ext3_warning(dir->i_sb, __func__,
"Unrecognised inode hash code %d",
root->info.hash_version);
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail;
}
hinfo->hash_version = root->info.hash_version;
if (hinfo->hash_version <= DX_HASH_TEA)
hinfo->hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned;
hinfo->seed = EXT3_SB(dir->i_sb)->s_hash_seed;
if (entry)
ext3fs_dirhash(entry->name, entry->len, hinfo);
hash = hinfo->hash;
if (root->info.unused_flags & 1) {
ext3_warning(dir->i_sb, __func__,
"Unimplemented inode hash flags: %#06x",
root->info.unused_flags);
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail;
}
if ((indirect = root->info.indirect_levels) > 1) {
ext3_warning(dir->i_sb, __func__,
"Unimplemented inode hash depth: %#06x",
root->info.indirect_levels);
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail;
}
entries = (struct dx_entry *) (((char *)&root->info) +
root->info.info_length);
if (dx_get_limit(entries) != dx_root_limit(dir,
root->info.info_length)) {
ext3_warning(dir->i_sb, __func__,
"dx entry: limit != root limit");
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail;
}
dxtrace (printk("Look up %x", hash));
while (1)
{
count = dx_get_count(entries);
if (!count || count > dx_get_limit(entries)) {
ext3_warning(dir->i_sb, __func__,
"dx entry: no count or count > limit");
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail2;
}
p = entries + 1;
q = entries + count - 1;
while (p <= q)
{
m = p + (q - p)/2;
dxtrace(printk("."));
if (dx_get_hash(m) > hash)
q = m - 1;
else
p = m + 1;
}
if (0) // linear search cross check
{
unsigned n = count - 1;
at = entries;
while (n--)
{
dxtrace(printk(","));
if (dx_get_hash(++at) > hash)
{
at--;
break;
}
}
assert (at == p - 1);
}
at = p - 1;
dxtrace(printk(" %x->%u\n", at == entries? 0: dx_get_hash(at), dx_get_block(at)));
frame->bh = bh;
frame->entries = entries;
frame->at = at;
if (!indirect--) return frame;
if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(at), 0, err))) {
*err = ERR_BAD_DX_DIR;
goto fail2;
}
at = entries = ((struct dx_node *) bh->b_data)->entries;
if (dx_get_limit(entries) != dx_node_limit (dir)) {
ext3_warning(dir->i_sb, __func__,
"dx entry: limit != node limit");
brelse(bh);
*err = ERR_BAD_DX_DIR;
goto fail2;
}
frame++;
frame->bh = NULL;
}
fail2:
while (frame >= frame_in) {
brelse(frame->bh);
frame--;
}
fail:
if (*err == ERR_BAD_DX_DIR)
ext3_warning(dir->i_sb, __func__,
"Corrupt dir inode %ld, running e2fsck is "
"recommended.", dir->i_ino);
return NULL;
}
static void dx_release (struct dx_frame *frames)
{
if (frames[0].bh == NULL)
return;
if (((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels)
brelse(frames[1].bh);
brelse(frames[0].bh);
}
/*
* This function increments the frame pointer to search the next leaf
* block, and reads in the necessary intervening nodes if the search
* should be necessary. Whether or not the search is necessary is
* controlled by the hash parameter. If the hash value is even, then
* the search is only continued if the next block starts with that
* hash value. This is used if we are searching for a specific file.
*
* If the hash value is HASH_NB_ALWAYS, then always go to the next block.
*
* This function returns 1 if the caller should continue to search,
* or 0 if it should not. If there is an error reading one of the
* index blocks, it will a negative error code.
*
* If start_hash is non-null, it will be filled in with the starting
* hash of the next page.
*/
static int ext3_htree_next_block(struct inode *dir, __u32 hash,
struct dx_frame *frame,
struct dx_frame *frames,
__u32 *start_hash)
{
struct dx_frame *p;
struct buffer_head *bh;
int err, num_frames = 0;
__u32 bhash;
p = frame;
/*
* Find the next leaf page by incrementing the frame pointer.
* If we run out of entries in the interior node, loop around and
* increment pointer in the parent node. When we break out of
* this loop, num_frames indicates the number of interior
* nodes need to be read.
*/
while (1) {
if (++(p->at) < p->entries + dx_get_count(p->entries))
break;
if (p == frames)
return 0;
num_frames++;
p--;
}
/*
* If the hash is 1, then continue only if the next page has a
* continuation hash of any value. This is used for readdir
* handling. Otherwise, check to see if the hash matches the
* desired contiuation hash. If it doesn't, return since
* there's no point to read in the successive index pages.
*/
bhash = dx_get_hash(p->at);
if (start_hash)
*start_hash = bhash;
if ((hash & 1) == 0) {
if ((bhash & ~1) != hash)
return 0;
}
/*
* If the hash is HASH_NB_ALWAYS, we always go to the next
* block so no check is necessary
*/
while (num_frames--) {
if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(p->at),
0, &err)))
return err; /* Failure */
p++;
brelse (p->bh);
p->bh = bh;
p->at = p->entries = ((struct dx_node *) bh->b_data)->entries;
}
return 1;
}
/*
* This function fills a red-black tree with information from a
* directory block. It returns the number directory entries loaded
* into the tree. If there is an error it is returned in err.
*/
static int htree_dirblock_to_tree(struct file *dir_file,
struct inode *dir, int block,
struct dx_hash_info *hinfo,
__u32 start_hash, __u32 start_minor_hash)
{
struct buffer_head *bh;
struct ext3_dir_entry_2 *de, *top;
int err = 0, count = 0;
dxtrace(printk("In htree dirblock_to_tree: block %d\n", block));
if (!(bh = ext3_dir_bread(NULL, dir, block, 0, &err)))
return err;
de = (struct ext3_dir_entry_2 *) bh->b_data;
top = (struct ext3_dir_entry_2 *) ((char *) de +
dir->i_sb->s_blocksize -
EXT3_DIR_REC_LEN(0));
for (; de < top; de = ext3_next_entry(de)) {
[PATCH] handle ext3 directory corruption better I've been using Steve Grubb's purely evil "fsfuzzer" tool, at http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz Basically it makes a filesystem, splats some random bits over it, then tries to mount it and do some simple filesystem actions. At best, the filesystem catches the corruption gracefully. At worst, things spin out of control. As you might guess, we found a couple places in ext3 where things spin out of control :) First, we had a corrupted directory that was never checked for consistency... it was corrupt, and pointed to another bad "entry" of length 0. The for() loop looped forever, since the length of ext3_next_entry(de) was 0, and we kept looking at the same pointer over and over and over and over... I modeled this check and subsequent action on what is done for other directory types in ext3_readdir... (adding this check adds some computational expense; I am testing a followup patch to reduce the number of times we check and re-check these directory entries, in all cases. Thanks for the idea, Andreas). Next we had a root directory inode which had a corrupted size, claimed to be > 200M on a 4M filesystem. There was only really 1 block in the directory, but because the size was so large, readdir kept coming back for more, spewing thousands of printk's along the way. Per Andreas' suggestion, if we're in this read error condition and we're trying to read an offset which is greater than i_blocks worth of bytes, stop trying, and break out of the loop. With these two changes fsfuzz test survives quite well on ext3. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:36:26 +08:00
if (!ext3_check_dir_entry("htree_dirblock_to_tree", dir, de, bh,
(block<<EXT3_BLOCK_SIZE_BITS(dir->i_sb))
+((char *)de - bh->b_data))) {
/* silently ignore the rest of the block */
break;
[PATCH] handle ext3 directory corruption better I've been using Steve Grubb's purely evil "fsfuzzer" tool, at http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz Basically it makes a filesystem, splats some random bits over it, then tries to mount it and do some simple filesystem actions. At best, the filesystem catches the corruption gracefully. At worst, things spin out of control. As you might guess, we found a couple places in ext3 where things spin out of control :) First, we had a corrupted directory that was never checked for consistency... it was corrupt, and pointed to another bad "entry" of length 0. The for() loop looped forever, since the length of ext3_next_entry(de) was 0, and we kept looking at the same pointer over and over and over and over... I modeled this check and subsequent action on what is done for other directory types in ext3_readdir... (adding this check adds some computational expense; I am testing a followup patch to reduce the number of times we check and re-check these directory entries, in all cases. Thanks for the idea, Andreas). Next we had a root directory inode which had a corrupted size, claimed to be > 200M on a 4M filesystem. There was only really 1 block in the directory, but because the size was so large, readdir kept coming back for more, spewing thousands of printk's along the way. Per Andreas' suggestion, if we're in this read error condition and we're trying to read an offset which is greater than i_blocks worth of bytes, stop trying, and break out of the loop. With these two changes fsfuzz test survives quite well on ext3. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:36:26 +08:00
}
ext3fs_dirhash(de->name, de->name_len, hinfo);
if ((hinfo->hash < start_hash) ||
((hinfo->hash == start_hash) &&
(hinfo->minor_hash < start_minor_hash)))
continue;
if (de->inode == 0)
continue;
if ((err = ext3_htree_store_dirent(dir_file,
hinfo->hash, hinfo->minor_hash, de)) != 0) {
brelse(bh);
return err;
}
count++;
}
brelse(bh);
return count;
}
/*
* This function fills a red-black tree with information from a
* directory. We start scanning the directory in hash order, starting
* at start_hash and start_minor_hash.
*
* This function returns the number of entries inserted into the tree,
* or a negative error code.
*/
int ext3_htree_fill_tree(struct file *dir_file, __u32 start_hash,
__u32 start_minor_hash, __u32 *next_hash)
{
struct dx_hash_info hinfo;
struct ext3_dir_entry_2 *de;
struct dx_frame frames[2], *frame;
struct inode *dir;
int block, err;
int count = 0;
int ret;
__u32 hashval;
dxtrace(printk("In htree_fill_tree, start hash: %x:%x\n", start_hash,
start_minor_hash));
dir = file_inode(dir_file);
if (!(EXT3_I(dir)->i_flags & EXT3_INDEX_FL)) {
hinfo.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version;
if (hinfo.hash_version <= DX_HASH_TEA)
hinfo.hash_version +=
EXT3_SB(dir->i_sb)->s_hash_unsigned;
hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed;
count = htree_dirblock_to_tree(dir_file, dir, 0, &hinfo,
start_hash, start_minor_hash);
*next_hash = ~0;
return count;
}
hinfo.hash = start_hash;
hinfo.minor_hash = 0;
frame = dx_probe(NULL, file_inode(dir_file), &hinfo, frames, &err);
if (!frame)
return err;
/* Add '.' and '..' from the htree header */
if (!start_hash && !start_minor_hash) {
de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data;
if ((err = ext3_htree_store_dirent(dir_file, 0, 0, de)) != 0)
goto errout;
count++;
}
if (start_hash < 2 || (start_hash ==2 && start_minor_hash==0)) {
de = (struct ext3_dir_entry_2 *) frames[0].bh->b_data;
de = ext3_next_entry(de);
if ((err = ext3_htree_store_dirent(dir_file, 2, 0, de)) != 0)
goto errout;
count++;
}
while (1) {
block = dx_get_block(frame->at);
ret = htree_dirblock_to_tree(dir_file, dir, block, &hinfo,
start_hash, start_minor_hash);
if (ret < 0) {
err = ret;
goto errout;
}
count += ret;
hashval = ~0;
ret = ext3_htree_next_block(dir, HASH_NB_ALWAYS,
frame, frames, &hashval);
*next_hash = hashval;
if (ret < 0) {
err = ret;
goto errout;
}
/*
* Stop if: (a) there are no more entries, or
* (b) we have inserted at least one entry and the
* next hash value is not a continuation
*/
if ((ret == 0) ||
(count && ((hashval & 1) == 0)))
break;
}
dx_release(frames);
dxtrace(printk("Fill tree: returned %d entries, next hash: %x\n",
count, *next_hash));
return count;
errout:
dx_release(frames);
return (err);
}
/*
* Directory block splitting, compacting
*/
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/*
* Create map of hash values, offsets, and sizes, stored at end of block.
* Returns number of entries mapped.
*/
static int dx_make_map(struct ext3_dir_entry_2 *de, unsigned blocksize,
struct dx_hash_info *hinfo, struct dx_map_entry *map_tail)
{
int count = 0;
char *base = (char *) de;
struct dx_hash_info h = *hinfo;
while ((char *) de < base + blocksize)
{
if (de->name_len && de->inode) {
ext3fs_dirhash(de->name, de->name_len, &h);
map_tail--;
map_tail->hash = h.hash;
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
map_tail->offs = (u16) ((char *) de - base);
map_tail->size = le16_to_cpu(de->rec_len);
count++;
cond_resched();
}
/* XXX: do we need to check rec_len == 0 case? -Chris */
de = ext3_next_entry(de);
}
return count;
}
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/* Sort map by hash value */
static void dx_sort_map (struct dx_map_entry *map, unsigned count)
{
struct dx_map_entry *p, *q, *top = map + count - 1;
int more;
/* Combsort until bubble sort doesn't suck */
while (count > 2)
{
count = count*10/13;
if (count - 9 < 2) /* 9, 10 -> 11 */
count = 11;
for (p = top, q = p - count; q >= map; p--, q--)
if (p->hash < q->hash)
swap(*p, *q);
}
/* Garden variety bubble sort */
do {
more = 0;
q = top;
while (q-- > map)
{
if (q[1].hash >= q[0].hash)
continue;
swap(*(q+1), *q);
more = 1;
}
} while(more);
}
static void dx_insert_block(struct dx_frame *frame, u32 hash, u32 block)
{
struct dx_entry *entries = frame->entries;
struct dx_entry *old = frame->at, *new = old + 1;
int count = dx_get_count(entries);
assert(count < dx_get_limit(entries));
assert(old < entries + count);
memmove(new + 1, new, (char *)(entries + count) - (char *)(new));
dx_set_hash(new, hash);
dx_set_block(new, block);
dx_set_count(entries, count + 1);
}
static void ext3_update_dx_flag(struct inode *inode)
{
if (!EXT3_HAS_COMPAT_FEATURE(inode->i_sb,
EXT3_FEATURE_COMPAT_DIR_INDEX))
EXT3_I(inode)->i_flags &= ~EXT3_INDEX_FL;
}
/*
* NOTE! unlike strncmp, ext3_match returns 1 for success, 0 for failure.
*
* `len <= EXT3_NAME_LEN' is guaranteed by caller.
* `de != NULL' is guaranteed by caller.
*/
static inline int ext3_match (int len, const char * const name,
struct ext3_dir_entry_2 * de)
{
if (len != de->name_len)
return 0;
if (!de->inode)
return 0;
return !memcmp(name, de->name, len);
}
/*
* Returns 0 if not found, -1 on failure, and 1 on success
*/
static inline int search_dirblock(struct buffer_head * bh,
struct inode *dir,
struct qstr *child,
unsigned long offset,
struct ext3_dir_entry_2 ** res_dir)
{
struct ext3_dir_entry_2 * de;
char * dlimit;
int de_len;
const char *name = child->name;
int namelen = child->len;
de = (struct ext3_dir_entry_2 *) bh->b_data;
dlimit = bh->b_data + dir->i_sb->s_blocksize;
while ((char *) de < dlimit) {
/* this code is executed quadratically often */
/* do minimal checking `by hand' */
if ((char *) de + namelen <= dlimit &&
ext3_match (namelen, name, de)) {
/* found a match - just to be sure, do a full check */
if (!ext3_check_dir_entry("ext3_find_entry",
dir, de, bh, offset))
return -1;
*res_dir = de;
return 1;
}
/* prevent looping on a bad block */
de_len = ext3_rec_len_from_disk(de->rec_len);
if (de_len <= 0)
return -1;
offset += de_len;
de = (struct ext3_dir_entry_2 *) ((char *) de + de_len);
}
return 0;
}
/*
* ext3_find_entry()
*
* finds an entry in the specified directory with the wanted name. It
* returns the cache buffer in which the entry was found, and the entry
* itself (as a parameter - res_dir). It does NOT read the inode of the
* entry - you'll have to do that yourself if you want to.
*
* The returned buffer_head has ->b_count elevated. The caller is expected
* to brelse() it when appropriate.
*/
static struct buffer_head *ext3_find_entry(struct inode *dir,
struct qstr *entry,
struct ext3_dir_entry_2 **res_dir)
{
struct super_block * sb;
struct buffer_head * bh_use[NAMEI_RA_SIZE];
struct buffer_head * bh, *ret = NULL;
unsigned long start, block, b;
const u8 *name = entry->name;
int ra_max = 0; /* Number of bh's in the readahead
buffer, bh_use[] */
int ra_ptr = 0; /* Current index into readahead
buffer */
int num = 0;
int nblocks, i, err;
int namelen;
*res_dir = NULL;
sb = dir->i_sb;
namelen = entry->len;
if (namelen > EXT3_NAME_LEN)
return NULL;
if ((namelen <= 2) && (name[0] == '.') &&
(name[1] == '.' || name[1] == 0)) {
/*
* "." or ".." will only be in the first block
* NFS may look up ".."; "." should be handled by the VFS
*/
block = start = 0;
nblocks = 1;
goto restart;
}
if (is_dx(dir)) {
bh = ext3_dx_find_entry(dir, entry, res_dir, &err);
/*
* On success, or if the error was file not found,
* return. Otherwise, fall back to doing a search the
* old fashioned way.
*/
if (bh || (err != ERR_BAD_DX_DIR))
return bh;
dxtrace(printk("ext3_find_entry: dx failed, falling back\n"));
}
nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb);
start = EXT3_I(dir)->i_dir_start_lookup;
if (start >= nblocks)
start = 0;
block = start;
restart:
do {
/*
* We deal with the read-ahead logic here.
*/
if (ra_ptr >= ra_max) {
/* Refill the readahead buffer */
ra_ptr = 0;
b = block;
for (ra_max = 0; ra_max < NAMEI_RA_SIZE; ra_max++) {
/*
* Terminate if we reach the end of the
* directory and must wrap, or if our
* search has finished at this block.
*/
if (b >= nblocks || (num && block == start)) {
bh_use[ra_max] = NULL;
break;
}
num++;
bh = ext3_getblk(NULL, dir, b++, 0, &err);
bh_use[ra_max] = bh;
if (bh && !bh_uptodate_or_lock(bh)) {
get_bh(bh);
bh->b_end_io = end_buffer_read_sync;
submit_bh(READ | REQ_META | REQ_PRIO,
bh);
}
}
}
if ((bh = bh_use[ra_ptr++]) == NULL)
goto next;
wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* read error, skip block & hope for the best */
ext3_error(sb, __func__, "reading directory #%lu "
"offset %lu", dir->i_ino, block);
brelse(bh);
goto next;
}
i = search_dirblock(bh, dir, entry,
block << EXT3_BLOCK_SIZE_BITS(sb), res_dir);
if (i == 1) {
EXT3_I(dir)->i_dir_start_lookup = block;
ret = bh;
goto cleanup_and_exit;
} else {
brelse(bh);
if (i < 0)
goto cleanup_and_exit;
}
next:
if (++block >= nblocks)
block = 0;
} while (block != start);
/*
* If the directory has grown while we were searching, then
* search the last part of the directory before giving up.
*/
block = nblocks;
nblocks = dir->i_size >> EXT3_BLOCK_SIZE_BITS(sb);
if (block < nblocks) {
start = 0;
goto restart;
}
cleanup_and_exit:
/* Clean up the read-ahead blocks */
for (; ra_ptr < ra_max; ra_ptr++)
brelse (bh_use[ra_ptr]);
return ret;
}
static struct buffer_head * ext3_dx_find_entry(struct inode *dir,
struct qstr *entry, struct ext3_dir_entry_2 **res_dir,
int *err)
{
struct super_block *sb = dir->i_sb;
struct dx_hash_info hinfo;
struct dx_frame frames[2], *frame;
struct buffer_head *bh;
unsigned long block;
int retval;
if (!(frame = dx_probe(entry, dir, &hinfo, frames, err)))
return NULL;
do {
block = dx_get_block(frame->at);
if (!(bh = ext3_dir_bread (NULL, dir, block, 0, err)))
goto errout;
retval = search_dirblock(bh, dir, entry,
block << EXT3_BLOCK_SIZE_BITS(sb),
res_dir);
if (retval == 1) {
dx_release(frames);
return bh;
}
brelse(bh);
if (retval == -1) {
*err = ERR_BAD_DX_DIR;
goto errout;
}
/* Check to see if we should continue to search */
retval = ext3_htree_next_block(dir, hinfo.hash, frame,
frames, NULL);
if (retval < 0) {
ext3_warning(sb, __func__,
"error reading index page in directory #%lu",
dir->i_ino);
*err = retval;
goto errout;
}
} while (retval == 1);
*err = -ENOENT;
errout:
dxtrace(printk("%s not found\n", entry->name));
dx_release (frames);
return NULL;
}
static struct dentry *ext3_lookup(struct inode * dir, struct dentry *dentry, unsigned int flags)
{
struct inode * inode;
struct ext3_dir_entry_2 * de;
struct buffer_head * bh;
if (dentry->d_name.len > EXT3_NAME_LEN)
return ERR_PTR(-ENAMETOOLONG);
bh = ext3_find_entry(dir, &dentry->d_name, &de);
inode = NULL;
if (bh) {
unsigned long ino = le32_to_cpu(de->inode);
brelse (bh);
if (!ext3_valid_inum(dir->i_sb, ino)) {
ext3_error(dir->i_sb, "ext3_lookup",
"bad inode number: %lu", ino);
return ERR_PTR(-EIO);
ext3/ext4: orphan list corruption due bad inode After ext3 orphan list check has been added into ext3_destroy_inode() (please see my previous patch) the following situation has been detected: EXT3-fs warning (device sda6): ext3_unlink: Deleting nonexistent file (37901290), 0 Inode 00000101a15b7840: orphan list check failed! 00000773 6f665f00 74616d72 00000573 65725f00 06737270 66000000 616d726f ... Call Trace: [<ffffffff80211ea9>] ext3_destroy_inode+0x79/0x90 [<ffffffff801a2b16>] sys_unlink+0x126/0x1a0 [<ffffffff80111479>] error_exit+0x0/0x81 [<ffffffff80110aba>] system_call+0x7e/0x83 First messages said that unlinked inode has i_nlink=0, then ext3_unlink() adds this inode into orphan list. Second message means that this inode has not been removed from orphan list. Inode dump has showed that i_fop = &bad_file_ops and it can be set in make_bad_inode() only. Then I've found that ext3_read_inode() can call make_bad_inode() without any error/warning messages, for example in the following case: ... if (inode->i_nlink == 0) { if (inode->i_mode == 0 || !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { /* this inode is deleted */ brelse (bh); goto bad_inode; ... Bad inode can live some time, ext3_unlink can add it to orphan list, but ext3_delete_inode() do not deleted this inode from orphan list. As result we can have orphan list corruption detected in ext3_destroy_inode(). However it is not clear for me how to fix this issue correctly. As far as i see is_bad_inode() is called after iget() in all places excluding ext3_lookup() and ext3_get_parent(). I believe it makes sense to add bad inode check to these functions too and call iput if bad inode detected. Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:40:46 +08:00
}
inode = ext3_iget(dir->i_sb, ino);
if (inode == ERR_PTR(-ESTALE)) {
ext3_error(dir->i_sb, __func__,
"deleted inode referenced: %lu",
ino);
return ERR_PTR(-EIO);
}
}
return d_splice_alias(inode, dentry);
}
struct dentry *ext3_get_parent(struct dentry *child)
{
unsigned long ino;
struct qstr dotdot = QSTR_INIT("..", 2);
struct ext3_dir_entry_2 * de;
struct buffer_head *bh;
bh = ext3_find_entry(child->d_inode, &dotdot, &de);
if (!bh)
return ERR_PTR(-ENOENT);
ino = le32_to_cpu(de->inode);
brelse(bh);
if (!ext3_valid_inum(child->d_inode->i_sb, ino)) {
ext3_error(child->d_inode->i_sb, "ext3_get_parent",
"bad inode number: %lu", ino);
return ERR_PTR(-EIO);
ext3/ext4: orphan list corruption due bad inode After ext3 orphan list check has been added into ext3_destroy_inode() (please see my previous patch) the following situation has been detected: EXT3-fs warning (device sda6): ext3_unlink: Deleting nonexistent file (37901290), 0 Inode 00000101a15b7840: orphan list check failed! 00000773 6f665f00 74616d72 00000573 65725f00 06737270 66000000 616d726f ... Call Trace: [<ffffffff80211ea9>] ext3_destroy_inode+0x79/0x90 [<ffffffff801a2b16>] sys_unlink+0x126/0x1a0 [<ffffffff80111479>] error_exit+0x0/0x81 [<ffffffff80110aba>] system_call+0x7e/0x83 First messages said that unlinked inode has i_nlink=0, then ext3_unlink() adds this inode into orphan list. Second message means that this inode has not been removed from orphan list. Inode dump has showed that i_fop = &bad_file_ops and it can be set in make_bad_inode() only. Then I've found that ext3_read_inode() can call make_bad_inode() without any error/warning messages, for example in the following case: ... if (inode->i_nlink == 0) { if (inode->i_mode == 0 || !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { /* this inode is deleted */ brelse (bh); goto bad_inode; ... Bad inode can live some time, ext3_unlink can add it to orphan list, but ext3_delete_inode() do not deleted this inode from orphan list. As result we can have orphan list corruption detected in ext3_destroy_inode(). However it is not clear for me how to fix this issue correctly. As far as i see is_bad_inode() is called after iget() in all places excluding ext3_lookup() and ext3_get_parent(). I believe it makes sense to add bad inode check to these functions too and call iput if bad inode detected. Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:40:46 +08:00
}
return d_obtain_alias(ext3_iget(child->d_inode->i_sb, ino));
}
#define S_SHIFT 12
static unsigned char ext3_type_by_mode[S_IFMT >> S_SHIFT] = {
[S_IFREG >> S_SHIFT] = EXT3_FT_REG_FILE,
[S_IFDIR >> S_SHIFT] = EXT3_FT_DIR,
[S_IFCHR >> S_SHIFT] = EXT3_FT_CHRDEV,
[S_IFBLK >> S_SHIFT] = EXT3_FT_BLKDEV,
[S_IFIFO >> S_SHIFT] = EXT3_FT_FIFO,
[S_IFSOCK >> S_SHIFT] = EXT3_FT_SOCK,
[S_IFLNK >> S_SHIFT] = EXT3_FT_SYMLINK,
};
static inline void ext3_set_de_type(struct super_block *sb,
struct ext3_dir_entry_2 *de,
umode_t mode) {
if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_FILETYPE))
de->file_type = ext3_type_by_mode[(mode & S_IFMT)>>S_SHIFT];
}
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/*
* Move count entries from end of map between two memory locations.
* Returns pointer to last entry moved.
*/
static struct ext3_dir_entry_2 *
dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count)
{
unsigned rec_len = 0;
while (count--) {
struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *) (from + map->offs);
rec_len = EXT3_DIR_REC_LEN(de->name_len);
memcpy (to, de, rec_len);
((struct ext3_dir_entry_2 *) to)->rec_len =
ext3_rec_len_to_disk(rec_len);
de->inode = 0;
map++;
to += rec_len;
}
return (struct ext3_dir_entry_2 *) (to - rec_len);
}
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/*
* Compact each dir entry in the range to the minimal rec_len.
* Returns pointer to last entry in range.
*/
static struct ext3_dir_entry_2 *dx_pack_dirents(char *base, unsigned blocksize)
{
struct ext3_dir_entry_2 *next, *to, *prev;
struct ext3_dir_entry_2 *de = (struct ext3_dir_entry_2 *)base;
unsigned rec_len = 0;
prev = to = de;
while ((char *)de < base + blocksize) {
next = ext3_next_entry(de);
if (de->inode && de->name_len) {
rec_len = EXT3_DIR_REC_LEN(de->name_len);
if (de > to)
memmove(to, de, rec_len);
to->rec_len = ext3_rec_len_to_disk(rec_len);
prev = to;
to = (struct ext3_dir_entry_2 *) (((char *) to) + rec_len);
}
de = next;
}
return prev;
}
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/*
* Split a full leaf block to make room for a new dir entry.
* Allocate a new block, and move entries so that they are approx. equally full.
* Returns pointer to de in block into which the new entry will be inserted.
*/
static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
struct buffer_head **bh,struct dx_frame *frame,
struct dx_hash_info *hinfo, int *error)
{
unsigned blocksize = dir->i_sb->s_blocksize;
unsigned count, continued;
struct buffer_head *bh2;
u32 newblock;
u32 hash2;
struct dx_map_entry *map;
char *data1 = (*bh)->b_data, *data2;
unsigned split, move, size;
struct ext3_dir_entry_2 *de = NULL, *de2;
int err = 0, i;
bh2 = ext3_append (handle, dir, &newblock, &err);
if (!(bh2)) {
brelse(*bh);
*bh = NULL;
goto errout;
}
BUFFER_TRACE(*bh, "get_write_access");
err = ext3_journal_get_write_access(handle, *bh);
if (err)
goto journal_error;
BUFFER_TRACE(frame->bh, "get_write_access");
err = ext3_journal_get_write_access(handle, frame->bh);
if (err)
goto journal_error;
data2 = bh2->b_data;
/* create map in the end of data2 block */
map = (struct dx_map_entry *) (data2 + blocksize);
count = dx_make_map ((struct ext3_dir_entry_2 *) data1,
blocksize, hinfo, map);
map -= count;
dx_sort_map (map, count);
ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Tested-by: Junjiro Okajima <hooanon05@yahoo.co.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: <linux-ext4@vger.kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 13:46:42 +08:00
/* Split the existing block in the middle, size-wise */
size = 0;
move = 0;
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
/* map index at which we will split */
split = count - move;
hash2 = map[split].hash;
continued = hash2 == map[split - 1].hash;
dxtrace(printk("Split block %i at %x, %i/%i\n",
dx_get_block(frame->at), hash2, split, count-split));
/* Fancy dance to stay within two buffers */
de2 = dx_move_dirents(data1, data2, map + split, count - split);
de = dx_pack_dirents(data1,blocksize);
de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de);
de2->rec_len = ext3_rec_len_to_disk(data2 + blocksize - (char *) de2);
dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data1, blocksize, 1));
dxtrace(dx_show_leaf (hinfo, (struct ext3_dir_entry_2 *) data2, blocksize, 1));
/* Which block gets the new entry? */
if (hinfo->hash >= hash2)
{
swap(*bh, bh2);
de = de2;
}
dx_insert_block (frame, hash2 + continued, newblock);
err = ext3_journal_dirty_metadata (handle, bh2);
if (err)
goto journal_error;
err = ext3_journal_dirty_metadata (handle, frame->bh);
if (err)
goto journal_error;
brelse (bh2);
dxtrace(dx_show_index ("frame", frame->entries));
return de;
journal_error:
brelse(*bh);
brelse(bh2);
*bh = NULL;
ext3_std_error(dir->i_sb, err);
errout:
*error = err;
return NULL;
}
/*
* Add a new entry into a directory (leaf) block. If de is non-NULL,
* it points to a directory entry which is guaranteed to be large
* enough for new directory entry. If de is NULL, then
* add_dirent_to_buf will attempt search the directory block for
* space. It will return -ENOSPC if no space is available, and -EIO
* and -EEXIST if directory entry already exists.
*
* NOTE! bh is NOT released in the case where ENOSPC is returned. In
* all other cases bh is released.
*/
static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry,
struct inode *inode, struct ext3_dir_entry_2 *de,
struct buffer_head * bh)
{
struct inode *dir = dentry->d_parent->d_inode;
const char *name = dentry->d_name.name;
int namelen = dentry->d_name.len;
unsigned long offset = 0;
unsigned short reclen;
int nlen, rlen, err;
char *top;
reclen = EXT3_DIR_REC_LEN(namelen);
if (!de) {
de = (struct ext3_dir_entry_2 *)bh->b_data;
top = bh->b_data + dir->i_sb->s_blocksize - reclen;
while ((char *) de <= top) {
if (!ext3_check_dir_entry("ext3_add_entry", dir, de,
bh, offset)) {
brelse (bh);
return -EIO;
}
if (ext3_match (namelen, name, de)) {
brelse (bh);
return -EEXIST;
}
nlen = EXT3_DIR_REC_LEN(de->name_len);
rlen = ext3_rec_len_from_disk(de->rec_len);
if ((de->inode? rlen - nlen: rlen) >= reclen)
break;
de = (struct ext3_dir_entry_2 *)((char *)de + rlen);
offset += rlen;
}
if ((char *) de > top)
return -ENOSPC;
}
BUFFER_TRACE(bh, "get_write_access");
err = ext3_journal_get_write_access(handle, bh);
if (err) {
ext3_std_error(dir->i_sb, err);
brelse(bh);
return err;
}
/* By now the buffer is marked for journaling */
nlen = EXT3_DIR_REC_LEN(de->name_len);
rlen = ext3_rec_len_from_disk(de->rec_len);
if (de->inode) {
struct ext3_dir_entry_2 *de1 = (struct ext3_dir_entry_2 *)((char *)de + nlen);
de1->rec_len = ext3_rec_len_to_disk(rlen - nlen);
de->rec_len = ext3_rec_len_to_disk(nlen);
de = de1;
}
de->file_type = EXT3_FT_UNKNOWN;
if (inode) {
de->inode = cpu_to_le32(inode->i_ino);
ext3_set_de_type(dir->i_sb, de, inode->i_mode);
} else
de->inode = 0;
de->name_len = namelen;
memcpy (de->name, name, namelen);
/*
* XXX shouldn't update any times until successful
* completion of syscall, but too many callers depend
* on this.
*
* XXX similarly, too many callers depend on
* ext3_new_inode() setting the times, but error
* recovery deletes the inode, so the worst that can
* happen is that the times are slightly out of date
* and/or different from the directory change time.
*/
dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC;
ext3_update_dx_flag(dir);
dir->i_version++;
ext3_mark_inode_dirty(handle, dir);
BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, bh);
if (err)
ext3_std_error(dir->i_sb, err);
brelse(bh);
return 0;
}
/*
* This converts a one block unindexed directory to a 3 block indexed
* directory, and adds the dentry to the indexed directory.
*/
static int make_indexed_dir(handle_t *handle, struct dentry *dentry,
struct inode *inode, struct buffer_head *bh)
{
struct inode *dir = dentry->d_parent->d_inode;
const char *name = dentry->d_name.name;
int namelen = dentry->d_name.len;
struct buffer_head *bh2;
struct dx_root *root;
struct dx_frame frames[2], *frame;
struct dx_entry *entries;
struct ext3_dir_entry_2 *de, *de2;
char *data1, *top;
unsigned len;
int retval;
unsigned blocksize;
struct dx_hash_info hinfo;
u32 block;
struct fake_dirent *fde;
blocksize = dir->i_sb->s_blocksize;
dxtrace(printk(KERN_DEBUG "Creating index: inode %lu\n", dir->i_ino));
retval = ext3_journal_get_write_access(handle, bh);
if (retval) {
ext3_std_error(dir->i_sb, retval);
brelse(bh);
return retval;
}
root = (struct dx_root *) bh->b_data;
/* The 0th block becomes the root, move the dirents out */
fde = &root->dotdot;
de = (struct ext3_dir_entry_2 *)((char *)fde +
ext3_rec_len_from_disk(fde->rec_len));
if ((char *) de >= (((char *) root) + blocksize)) {
ext3_error(dir->i_sb, __func__,
"invalid rec_len for '..' in inode %lu",
dir->i_ino);
brelse(bh);
return -EIO;
}
len = ((char *) root) + blocksize - (char *) de;
bh2 = ext3_append (handle, dir, &block, &retval);
if (!(bh2)) {
brelse(bh);
return retval;
}
EXT3_I(dir)->i_flags |= EXT3_INDEX_FL;
data1 = bh2->b_data;
memcpy (data1, de, len);
de = (struct ext3_dir_entry_2 *) data1;
top = data1 + len;
while ((char *)(de2 = ext3_next_entry(de)) < top)
de = de2;
de->rec_len = ext3_rec_len_to_disk(data1 + blocksize - (char *) de);
/* Initialize the root; the dot dirents already exist */
de = (struct ext3_dir_entry_2 *) (&root->dotdot);
de->rec_len = ext3_rec_len_to_disk(blocksize - EXT3_DIR_REC_LEN(2));
memset (&root->info, 0, sizeof(root->info));
root->info.info_length = sizeof(root->info);
root->info.hash_version = EXT3_SB(dir->i_sb)->s_def_hash_version;
entries = root->entries;
dx_set_block (entries, 1);
dx_set_count (entries, 1);
dx_set_limit (entries, dx_root_limit(dir, sizeof(root->info)));
/* Initialize as for dx_probe */
hinfo.hash_version = root->info.hash_version;
if (hinfo.hash_version <= DX_HASH_TEA)
hinfo.hash_version += EXT3_SB(dir->i_sb)->s_hash_unsigned;
hinfo.seed = EXT3_SB(dir->i_sb)->s_hash_seed;
ext3fs_dirhash(name, namelen, &hinfo);
frame = frames;
frame->entries = entries;
frame->at = entries;
frame->bh = bh;
bh = bh2;
/*
* Mark buffers dirty here so that if do_split() fails we write a
* consistent set of buffers to disk.
*/
ext3_journal_dirty_metadata(handle, frame->bh);
ext3_journal_dirty_metadata(handle, bh);
de = do_split(handle,dir, &bh, frame, &hinfo, &retval);
if (!de) {
ext3_mark_inode_dirty(handle, dir);
dx_release(frames);
return retval;
}
dx_release(frames);
return add_dirent_to_buf(handle, dentry, inode, de, bh);
}
/*
* ext3_add_entry()
*
* adds a file entry to the specified directory, using the same
* semantics as ext3_find_entry(). It returns NULL if it failed.
*
* NOTE!! The inode part of 'de' is left at 0 - which means you
* may not sleep between calling this and putting something into
* the entry, as someone else might have used it while you slept.
*/
static int ext3_add_entry (handle_t *handle, struct dentry *dentry,
struct inode *inode)
{
struct inode *dir = dentry->d_parent->d_inode;
struct buffer_head * bh;
struct ext3_dir_entry_2 *de;
struct super_block * sb;
int retval;
int dx_fallback=0;
unsigned blocksize;
u32 block, blocks;
sb = dir->i_sb;
blocksize = sb->s_blocksize;
if (!dentry->d_name.len)
return -EINVAL;
if (is_dx(dir)) {
retval = ext3_dx_add_entry(handle, dentry, inode);
if (!retval || (retval != ERR_BAD_DX_DIR))
return retval;
EXT3_I(dir)->i_flags &= ~EXT3_INDEX_FL;
dx_fallback++;
ext3_mark_inode_dirty(handle, dir);
}
blocks = dir->i_size >> sb->s_blocksize_bits;
for (block = 0; block < blocks; block++) {
if (!(bh = ext3_dir_bread(handle, dir, block, 0, &retval)))
return retval;
retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh);
if (retval != -ENOSPC)
return retval;
if (blocks == 1 && !dx_fallback &&
EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_DIR_INDEX))
return make_indexed_dir(handle, dentry, inode, bh);
brelse(bh);
}
bh = ext3_append(handle, dir, &block, &retval);
if (!bh)
return retval;
de = (struct ext3_dir_entry_2 *) bh->b_data;
de->inode = 0;
de->rec_len = ext3_rec_len_to_disk(blocksize);
return add_dirent_to_buf(handle, dentry, inode, de, bh);
}
/*
* Returns 0 for success, or a negative error value
*/
static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry,
struct inode *inode)
{
struct dx_frame frames[2], *frame;
struct dx_entry *entries, *at;
struct dx_hash_info hinfo;
struct buffer_head * bh;
struct inode *dir = dentry->d_parent->d_inode;
struct super_block * sb = dir->i_sb;
struct ext3_dir_entry_2 *de;
int err;
frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err);
if (!frame)
return err;
entries = frame->entries;
at = frame->at;
if (!(bh = ext3_dir_bread(handle, dir, dx_get_block(frame->at), 0, &err)))
goto cleanup;
BUFFER_TRACE(bh, "get_write_access");
err = ext3_journal_get_write_access(handle, bh);
if (err)
goto journal_error;
err = add_dirent_to_buf(handle, dentry, inode, NULL, bh);
if (err != -ENOSPC) {
bh = NULL;
goto cleanup;
}
/* Block full, should compress but for now just split */
dxtrace(printk("using %u of %u node entries\n",
dx_get_count(entries), dx_get_limit(entries)));
/* Need to split index? */
if (dx_get_count(entries) == dx_get_limit(entries)) {
u32 newblock;
unsigned icount = dx_get_count(entries);
int levels = frame - frames;
struct dx_entry *entries2;
struct dx_node *node2;
struct buffer_head *bh2;
if (levels && (dx_get_count(frames->entries) ==
dx_get_limit(frames->entries))) {
ext3_warning(sb, __func__,
"Directory index full!");
err = -ENOSPC;
goto cleanup;
}
bh2 = ext3_append (handle, dir, &newblock, &err);
if (!(bh2))
goto cleanup;
node2 = (struct dx_node *)(bh2->b_data);
entries2 = node2->entries;
memset(&node2->fake, 0, sizeof(struct fake_dirent));
node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize);
BUFFER_TRACE(frame->bh, "get_write_access");
err = ext3_journal_get_write_access(handle, frame->bh);
if (err)
goto journal_error;
if (levels) {
unsigned icount1 = icount/2, icount2 = icount - icount1;
unsigned hash2 = dx_get_hash(entries + icount1);
dxtrace(printk("Split index %i/%i\n", icount1, icount2));
BUFFER_TRACE(frame->bh, "get_write_access"); /* index root */
err = ext3_journal_get_write_access(handle,
frames[0].bh);
if (err)
goto journal_error;
memcpy ((char *) entries2, (char *) (entries + icount1),
icount2 * sizeof(struct dx_entry));
dx_set_count (entries, icount1);
dx_set_count (entries2, icount2);
dx_set_limit (entries2, dx_node_limit(dir));
/* Which index block gets the new entry? */
if (at - entries >= icount1) {
frame->at = at = at - entries - icount1 + entries2;
frame->entries = entries = entries2;
swap(frame->bh, bh2);
}
dx_insert_block (frames + 0, hash2, newblock);
dxtrace(dx_show_index ("node", frames[1].entries));
dxtrace(dx_show_index ("node",
((struct dx_node *) bh2->b_data)->entries));
err = ext3_journal_dirty_metadata(handle, bh2);
if (err)
goto journal_error;
brelse (bh2);
} else {
dxtrace(printk("Creating second level index...\n"));
memcpy((char *) entries2, (char *) entries,
icount * sizeof(struct dx_entry));
dx_set_limit(entries2, dx_node_limit(dir));
/* Set up root */
dx_set_count(entries, 1);
dx_set_block(entries + 0, newblock);
((struct dx_root *) frames[0].bh->b_data)->info.indirect_levels = 1;
/* Add new access path frame */
frame = frames + 1;
frame->at = at = at - entries + entries2;
frame->entries = entries = entries2;
frame->bh = bh2;
err = ext3_journal_get_write_access(handle,
frame->bh);
if (err)
goto journal_error;
}
err = ext3_journal_dirty_metadata(handle, frames[0].bh);
if (err)
goto journal_error;
}
de = do_split(handle, dir, &bh, frame, &hinfo, &err);
if (!de)
goto cleanup;
err = add_dirent_to_buf(handle, dentry, inode, de, bh);
bh = NULL;
goto cleanup;
journal_error:
ext3_std_error(dir->i_sb, err);
cleanup:
if (bh)
brelse(bh);
dx_release(frames);
return err;
}
/*
* ext3_delete_entry deletes a directory entry by merging it with the
* previous entry
*/
static int ext3_delete_entry (handle_t *handle,
struct inode * dir,
struct ext3_dir_entry_2 * de_del,
struct buffer_head * bh)
{
struct ext3_dir_entry_2 * de, * pde;
int i;
i = 0;
pde = NULL;
de = (struct ext3_dir_entry_2 *) bh->b_data;
while (i < bh->b_size) {
if (!ext3_check_dir_entry("ext3_delete_entry", dir, de, bh, i))
return -EIO;
if (de == de_del) {
int err;
BUFFER_TRACE(bh, "get_write_access");
err = ext3_journal_get_write_access(handle, bh);
if (err)
goto journal_error;
if (pde)
pde->rec_len = ext3_rec_len_to_disk(
ext3_rec_len_from_disk(pde->rec_len) +
ext3_rec_len_from_disk(de->rec_len));
else
de->inode = 0;
dir->i_version++;
BUFFER_TRACE(bh, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, bh);
if (err) {
journal_error:
ext3_std_error(dir->i_sb, err);
return err;
}
return 0;
}
i += ext3_rec_len_from_disk(de->rec_len);
pde = de;
de = ext3_next_entry(de);
}
return -ENOENT;
}
static int ext3_add_nondir(handle_t *handle,
struct dentry *dentry, struct inode *inode)
{
int err = ext3_add_entry(handle, dentry, inode);
if (!err) {
ext3_mark_inode_dirty(handle, inode);
unlock_new_inode(inode);
d_instantiate(dentry, inode);
return 0;
}
drop_nlink(inode);
unlock_new_inode(inode);
iput(inode);
return err;
}
/*
* By the time this is called, we already have created
* the directory cache entry for the new file, but it
* is so far negative - it has no inode.
*
* If the create succeeds, we fill in the inode information
* with d_instantiate().
*/
static int ext3_create (struct inode * dir, struct dentry * dentry, umode_t mode,
bool excl)
{
handle_t *handle;
struct inode * inode;
int err, retries = 0;
dquot_initialize(dir);
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode = ext3_new_inode (handle, dir, &dentry->d_name, mode);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
inode->i_op = &ext3_file_inode_operations;
inode->i_fop = &ext3_file_operations;
ext3_set_aops(inode);
err = ext3_add_nondir(handle, dentry, inode);
}
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
}
static int ext3_mknod (struct inode * dir, struct dentry *dentry,
umode_t mode, dev_t rdev)
{
handle_t *handle;
struct inode *inode;
int err, retries = 0;
if (!new_valid_dev(rdev))
return -EINVAL;
dquot_initialize(dir);
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode = ext3_new_inode (handle, dir, &dentry->d_name, mode);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
init_special_inode(inode, inode->i_mode, rdev);
#ifdef CONFIG_EXT3_FS_XATTR
inode->i_op = &ext3_special_inode_operations;
#endif
err = ext3_add_nondir(handle, dentry, inode);
}
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
}
static int ext3_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode)
{
handle_t *handle;
struct inode *inode;
int err, retries = 0;
dquot_initialize(dir);
retry:
handle = ext3_journal_start(dir, EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) +
4 + EXT3_XATTR_TRANS_BLOCKS);
if (IS_ERR(handle))
return PTR_ERR(handle);
inode = ext3_new_inode (handle, dir, NULL, mode);
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
inode->i_op = &ext3_file_inode_operations;
inode->i_fop = &ext3_file_operations;
ext3_set_aops(inode);
ext3: fix a BUG when opening a file with O_TMPFILE flag When we try to open a file with O_TMPFILE flag, we will trigger a bug. The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and this check always fails because we set ->i_nlink = 1 in inode_init_always(). We can use the following program to trigger it: int main(int argc, char *argv[]) { int fd; fd = open(argv[1], O_TMPFILE, 0666); if (fd < 0) { perror("open "); return -1; } close(fd); return 0; } The oops message looks like this: kernel: kernel BUG at fs/ext3/namei.c:1992! kernel: invalid opcode: 0000 [#1] SMP kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4 kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010 kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000 kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP: 0018:ffff8801124d5cc8 EFLAGS: 00010202 kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0 kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8 kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000 kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8 kernel: FS: 00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0 kernel: Stack: kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7 kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000 kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1 kernel: Call Trace: kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd] kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3] kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7 kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30 kernel: [<ffffffff82065fa2>] ? __dequeue_entity+0x33/0x38 kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102 kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20 kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0 kernel: RIP [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3] kernel: RSP <ffff8801124d5cc8> Here we couldn't call clear_nlink() directly because in d_tmpfile() we will call inode_dec_link_count() to decrease ->i_nlink. So this commit tries to call d_tmpfile() before ext4_orphan_add() to fix this problem. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk>
2013-07-21 10:03:20 +08:00
d_tmpfile(dentry, inode);
err = ext3_orphan_add(handle, inode);
if (err)
goto err_drop_inode;
mark_inode_dirty(inode);
unlock_new_inode(inode);
}
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
err_drop_inode:
ext3_journal_stop(handle);
unlock_new_inode(inode);
iput(inode);
return err;
}
static int ext3_mkdir(struct inode * dir, struct dentry * dentry, umode_t mode)
{
handle_t *handle;
struct inode * inode;
struct buffer_head * dir_block = NULL;
struct ext3_dir_entry_2 * de;
int err, retries = 0;
if (dir->i_nlink >= EXT3_LINK_MAX)
return -EMLINK;
dquot_initialize(dir);
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFDIR | mode);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
inode->i_op = &ext3_dir_inode_operations;
inode->i_fop = &ext3_dir_operations;
inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize;
if (!(dir_block = ext3_dir_bread(handle, inode, 0, 1, &err)))
goto out_clear_inode;
BUFFER_TRACE(dir_block, "get_write_access");
err = ext3_journal_get_write_access(handle, dir_block);
if (err)
goto out_clear_inode;
de = (struct ext3_dir_entry_2 *) dir_block->b_data;
de->inode = cpu_to_le32(inode->i_ino);
de->name_len = 1;
de->rec_len = ext3_rec_len_to_disk(EXT3_DIR_REC_LEN(de->name_len));
strcpy (de->name, ".");
ext3_set_de_type(dir->i_sb, de, S_IFDIR);
de = ext3_next_entry(de);
de->inode = cpu_to_le32(dir->i_ino);
de->rec_len = ext3_rec_len_to_disk(inode->i_sb->s_blocksize -
EXT3_DIR_REC_LEN(1));
de->name_len = 2;
strcpy (de->name, "..");
ext3_set_de_type(dir->i_sb, de, S_IFDIR);
set_nlink(inode, 2);
BUFFER_TRACE(dir_block, "call ext3_journal_dirty_metadata");
err = ext3_journal_dirty_metadata(handle, dir_block);
if (err)
goto out_clear_inode;
err = ext3_mark_inode_dirty(handle, inode);
if (!err)
err = ext3_add_entry (handle, dentry, inode);
if (err) {
out_clear_inode:
clear_nlink(inode);
unlock_new_inode(inode);
ext3_mark_inode_dirty(handle, inode);
iput (inode);
goto out_stop;
}
inc_nlink(dir);
ext3_update_dx_flag(dir);
err = ext3_mark_inode_dirty(handle, dir);
if (err)
goto out_clear_inode;
unlock_new_inode(inode);
d_instantiate(dentry, inode);
out_stop:
brelse(dir_block);
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
}
/*
* routine to check that the specified directory is empty (for rmdir)
*/
static int empty_dir (struct inode * inode)
{
unsigned long offset;
struct buffer_head * bh;
struct ext3_dir_entry_2 * de, * de1;
struct super_block * sb;
int err = 0;
sb = inode->i_sb;
if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) ||
!(bh = ext3_dir_bread(NULL, inode, 0, 0, &err))) {
if (err)
ext3_error(inode->i_sb, __func__,
"error %d reading directory #%lu offset 0",
err, inode->i_ino);
else
ext3_warning(inode->i_sb, __func__,
"bad directory (dir #%lu) - no data block",
inode->i_ino);
return 1;
}
de = (struct ext3_dir_entry_2 *) bh->b_data;
de1 = ext3_next_entry(de);
if (le32_to_cpu(de->inode) != inode->i_ino ||
!le32_to_cpu(de1->inode) ||
strcmp (".", de->name) ||
strcmp ("..", de1->name)) {
ext3_warning (inode->i_sb, "empty_dir",
"bad directory (dir #%lu) - no `.' or `..'",
inode->i_ino);
brelse (bh);
return 1;
}
offset = ext3_rec_len_from_disk(de->rec_len) +
ext3_rec_len_from_disk(de1->rec_len);
de = ext3_next_entry(de1);
while (offset < inode->i_size ) {
if (!bh ||
(void *) de >= (void *) (bh->b_data+sb->s_blocksize)) {
err = 0;
brelse (bh);
if (!(bh = ext3_dir_bread (NULL, inode,
offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err))) {
if (err)
ext3_error(sb, __func__,
"error %d reading directory"
" #%lu offset %lu",
err, inode->i_ino, offset);
offset += sb->s_blocksize;
continue;
}
de = (struct ext3_dir_entry_2 *) bh->b_data;
}
if (!ext3_check_dir_entry("empty_dir", inode, de, bh, offset)) {
de = (struct ext3_dir_entry_2 *)(bh->b_data +
sb->s_blocksize);
offset = (offset | (sb->s_blocksize - 1)) + 1;
continue;
}
if (le32_to_cpu(de->inode)) {
brelse (bh);
return 0;
}
offset += ext3_rec_len_from_disk(de->rec_len);
de = ext3_next_entry(de);
}
brelse (bh);
return 1;
}
/* ext3_orphan_add() links an unlinked or truncated inode into a list of
* such inodes, starting at the superblock, in case we crash before the
* file is closed/deleted, or in case the inode truncate spans multiple
* transactions and the last transaction is not recovered after a crash.
*
* At filesystem recovery time, we walk this list deleting unlinked
* inodes and truncating linked inodes in ext3_orphan_cleanup().
*/
int ext3_orphan_add(handle_t *handle, struct inode *inode)
{
struct super_block *sb = inode->i_sb;
struct ext3_iloc iloc;
int err = 0, rc;
mutex_lock(&EXT3_SB(sb)->s_orphan_lock);
if (!list_empty(&EXT3_I(inode)->i_orphan))
goto out_unlock;
/* Orphan handling is only valid for files with data blocks
* being truncated, or files being unlinked. */
/* @@@ FIXME: Observation from aviro:
* I think I can trigger J_ASSERT in ext3_orphan_add(). We block
* here (on s_orphan_lock), so race with ext3_link() which might bump
* ->i_nlink. For, say it, character device. Not a regular file,
* not a directory, not a symlink and ->i_nlink > 0.
*
* tytso, 4/25/2009: I'm not sure how that could happen;
* shouldn't the fs core protect us from these sort of
* unlink()/link() races?
*/
J_ASSERT ((S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode)) || inode->i_nlink == 0);
BUFFER_TRACE(EXT3_SB(sb)->s_sbh, "get_write_access");
err = ext3_journal_get_write_access(handle, EXT3_SB(sb)->s_sbh);
if (err)
goto out_unlock;
err = ext3_reserve_inode_write(handle, inode, &iloc);
if (err)
goto out_unlock;
/* Insert this inode at the head of the on-disk orphan list... */
NEXT_ORPHAN(inode) = le32_to_cpu(EXT3_SB(sb)->s_es->s_last_orphan);
EXT3_SB(sb)->s_es->s_last_orphan = cpu_to_le32(inode->i_ino);
err = ext3_journal_dirty_metadata(handle, EXT3_SB(sb)->s_sbh);
rc = ext3_mark_iloc_dirty(handle, inode, &iloc);
if (!err)
err = rc;
/* Only add to the head of the in-memory list if all the
* previous operations succeeded. If the orphan_add is going to
* fail (possibly taking the journal offline), we can't risk
* leaving the inode on the orphan list: stray orphan-list
* entries can cause panics at unmount time.
*
* This is safe: on error we're going to ignore the orphan list
* anyway on the next recovery. */
if (!err)
list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan);
jbd_debug(4, "superblock will point to %lu\n", inode->i_ino);
jbd_debug(4, "orphan inode %lu will point to %d\n",
inode->i_ino, NEXT_ORPHAN(inode));
out_unlock:
mutex_unlock(&EXT3_SB(sb)->s_orphan_lock);
ext3_std_error(inode->i_sb, err);
return err;
}
/*
* ext3_orphan_del() removes an unlinked or truncated inode from the list
* of such inodes stored on disk, because it is finally being cleaned up.
*/
int ext3_orphan_del(handle_t *handle, struct inode *inode)
{
struct list_head *prev;
struct ext3_inode_info *ei = EXT3_I(inode);
struct ext3_sb_info *sbi;
unsigned long ino_next;
struct ext3_iloc iloc;
int err = 0;
mutex_lock(&EXT3_SB(inode->i_sb)->s_orphan_lock);
if (list_empty(&ei->i_orphan))
goto out;
ino_next = NEXT_ORPHAN(inode);
prev = ei->i_orphan.prev;
sbi = EXT3_SB(inode->i_sb);
jbd_debug(4, "remove inode %lu from orphan list\n", inode->i_ino);
list_del_init(&ei->i_orphan);
/* If we're on an error path, we may not have a valid
* transaction handle with which to update the orphan list on
* disk, but we still need to remove the inode from the linked
* list in memory. */
if (!handle)
goto out;
err = ext3_reserve_inode_write(handle, inode, &iloc);
if (err)
goto out_err;
if (prev == &sbi->s_orphan) {
jbd_debug(4, "superblock will point to %lu\n", ino_next);
BUFFER_TRACE(sbi->s_sbh, "get_write_access");
err = ext3_journal_get_write_access(handle, sbi->s_sbh);
if (err)
goto out_brelse;
sbi->s_es->s_last_orphan = cpu_to_le32(ino_next);
err = ext3_journal_dirty_metadata(handle, sbi->s_sbh);
} else {
struct ext3_iloc iloc2;
struct inode *i_prev =
&list_entry(prev, struct ext3_inode_info, i_orphan)->vfs_inode;
jbd_debug(4, "orphan inode %lu will point to %lu\n",
i_prev->i_ino, ino_next);
err = ext3_reserve_inode_write(handle, i_prev, &iloc2);
if (err)
goto out_brelse;
NEXT_ORPHAN(i_prev) = ino_next;
err = ext3_mark_iloc_dirty(handle, i_prev, &iloc2);
}
if (err)
goto out_brelse;
NEXT_ORPHAN(inode) = 0;
err = ext3_mark_iloc_dirty(handle, inode, &iloc);
out_err:
ext3_std_error(inode->i_sb, err);
out:
mutex_unlock(&EXT3_SB(inode->i_sb)->s_orphan_lock);
return err;
out_brelse:
brelse(iloc.bh);
goto out_err;
}
static int ext3_rmdir (struct inode * dir, struct dentry *dentry)
{
int retval;
struct inode * inode;
struct buffer_head * bh;
struct ext3_dir_entry_2 * de;
handle_t *handle;
/* Initialize quotas before so that eventual writes go in
* separate transaction */
dquot_initialize(dir);
dquot_initialize(dentry->d_inode);
handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
retval = -ENOENT;
bh = ext3_find_entry(dir, &dentry->d_name, &de);
if (!bh)
goto end_rmdir;
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode = dentry->d_inode;
retval = -EIO;
if (le32_to_cpu(de->inode) != inode->i_ino)
goto end_rmdir;
retval = -ENOTEMPTY;
if (!empty_dir (inode))
goto end_rmdir;
retval = ext3_delete_entry(handle, dir, de, bh);
if (retval)
goto end_rmdir;
if (inode->i_nlink != 2)
ext3_warning (inode->i_sb, "ext3_rmdir",
"empty directory has nlink!=2 (%d)",
inode->i_nlink);
inode->i_version++;
clear_nlink(inode);
/* There's no need to set i_disksize: the fact that i_nlink is
* zero will ensure that the right thing happens during any
* recovery. */
inode->i_size = 0;
ext3_orphan_add(handle, inode);
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, inode);
drop_nlink(dir);
ext3_update_dx_flag(dir);
ext3_mark_inode_dirty(handle, dir);
end_rmdir:
ext3_journal_stop(handle);
brelse (bh);
return retval;
}
static int ext3_unlink(struct inode * dir, struct dentry *dentry)
{
int retval;
struct inode * inode;
struct buffer_head * bh;
struct ext3_dir_entry_2 * de;
handle_t *handle;
trace_ext3_unlink_enter(dir, dentry);
/* Initialize quotas before so that eventual writes go
* in separate transaction */
dquot_initialize(dir);
dquot_initialize(dentry->d_inode);
handle = ext3_journal_start(dir, EXT3_DELETE_TRANS_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
retval = -ENOENT;
bh = ext3_find_entry(dir, &dentry->d_name, &de);
if (!bh)
goto end_unlink;
inode = dentry->d_inode;
retval = -EIO;
if (le32_to_cpu(de->inode) != inode->i_ino)
goto end_unlink;
if (!inode->i_nlink) {
ext3_warning (inode->i_sb, "ext3_unlink",
"Deleting nonexistent file (%lu), %d",
inode->i_ino, inode->i_nlink);
set_nlink(inode, 1);
}
retval = ext3_delete_entry(handle, dir, de, bh);
if (retval)
goto end_unlink;
dir->i_ctime = dir->i_mtime = CURRENT_TIME_SEC;
ext3_update_dx_flag(dir);
ext3_mark_inode_dirty(handle, dir);
drop_nlink(inode);
if (!inode->i_nlink)
ext3_orphan_add(handle, inode);
inode->i_ctime = dir->i_ctime;
ext3_mark_inode_dirty(handle, inode);
retval = 0;
end_unlink:
ext3_journal_stop(handle);
brelse (bh);
trace_ext3_unlink_exit(dentry, retval);
return retval;
}
static int ext3_symlink (struct inode * dir,
struct dentry *dentry, const char * symname)
{
handle_t *handle;
struct inode * inode;
int l, err, retries = 0;
int credits;
l = strlen(symname)+1;
if (l > dir->i_sb->s_blocksize)
return -ENAMETOOLONG;
dquot_initialize(dir);
if (l > EXT3_N_BLOCKS * 4) {
/*
* For non-fast symlinks, we just allocate inode and put it on
* orphan list in the first transaction => we need bitmap,
* group descriptor, sb, inode block, quota blocks, and
* possibly selinux xattr blocks.
*/
credits = 4 + EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb) +
EXT3_XATTR_TRANS_BLOCKS;
} else {
/*
* Fast symlink. We have to add entry to directory
* (EXT3_DATA_TRANS_BLOCKS + EXT3_INDEX_EXTRA_TRANS_BLOCKS),
* allocate new inode (bitmap, group descriptor, inode block,
* quota blocks, sb is already counted in previous macros).
*/
credits = EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 3 +
EXT3_MAXQUOTAS_INIT_BLOCKS(dir->i_sb);
}
retry:
handle = ext3_journal_start(dir, credits);
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode = ext3_new_inode (handle, dir, &dentry->d_name, S_IFLNK|S_IRWXUGO);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_stop;
if (l > EXT3_N_BLOCKS * 4) {
inode->i_op = &ext3_symlink_inode_operations;
ext3_set_aops(inode);
/*
* We cannot call page_symlink() with transaction started
* because it calls into ext3_write_begin() which acquires page
* lock which ranks below transaction start (and it can also
* wait for journal commit if we are running out of space). So
* we have to stop transaction now and restart it when symlink
* contents is written.
*
* To keep fs consistent in case of crash, we have to put inode
* to orphan list in the mean time.
*/
drop_nlink(inode);
err = ext3_orphan_add(handle, inode);
ext3_journal_stop(handle);
if (err)
goto err_drop_inode;
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05 04:00:53 +08:00
err = __page_symlink(inode, symname, l, 1);
if (err)
goto err_drop_inode;
/*
* Now inode is being linked into dir (EXT3_DATA_TRANS_BLOCKS
* + EXT3_INDEX_EXTRA_TRANS_BLOCKS), inode is also modified
*/
handle = ext3_journal_start(dir,
EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 1);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto err_drop_inode;
}
set_nlink(inode, 1);
err = ext3_orphan_del(handle, inode);
if (err) {
ext3_journal_stop(handle);
drop_nlink(inode);
goto err_drop_inode;
}
} else {
inode->i_op = &ext3_fast_symlink_inode_operations;
memcpy((char*)&EXT3_I(inode)->i_data,symname,l);
inode->i_size = l-1;
}
EXT3_I(inode)->i_disksize = inode->i_size;
err = ext3_add_nondir(handle, dentry, inode);
out_stop:
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
err_drop_inode:
unlock_new_inode(inode);
iput(inode);
return err;
}
static int ext3_link (struct dentry * old_dentry,
struct inode * dir, struct dentry *dentry)
{
handle_t *handle;
struct inode *inode = old_dentry->d_inode;
int err, retries = 0;
if (inode->i_nlink >= EXT3_LINK_MAX)
return -EMLINK;
dquot_initialize(dir);
retry:
handle = ext3_journal_start(dir, EXT3_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 1);
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(dir))
handle->h_sync = 1;
inode->i_ctime = CURRENT_TIME_SEC;
inc_nlink(inode);
ihold(inode);
err = ext3_add_entry(handle, dentry, inode);
if (!err) {
ext3_mark_inode_dirty(handle, inode);
/* this can happen only for tmpfile being
* linked the first time
*/
if (inode->i_nlink == 1)
ext3_orphan_del(handle, inode);
d_instantiate(dentry, inode);
} else {
drop_nlink(inode);
iput(inode);
}
ext3_journal_stop(handle);
if (err == -ENOSPC && ext3_should_retry_alloc(dir->i_sb, &retries))
goto retry;
return err;
}
#define PARENT_INO(buffer) \
(ext3_next_entry((struct ext3_dir_entry_2 *)(buffer))->inode)
/*
* Anybody can rename anything with this: the permission checks are left to the
* higher-level routines.
*/
static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry,
struct inode * new_dir,struct dentry *new_dentry)
{
handle_t *handle;
struct inode * old_inode, * new_inode;
struct buffer_head * old_bh, * new_bh, * dir_bh;
struct ext3_dir_entry_2 * old_de, * new_de;
int retval, flush_file = 0;
dquot_initialize(old_dir);
dquot_initialize(new_dir);
old_bh = new_bh = dir_bh = NULL;
/* Initialize quotas before so that eventual writes go
* in separate transaction */
if (new_dentry->d_inode)
dquot_initialize(new_dentry->d_inode);
handle = ext3_journal_start(old_dir, 2 *
EXT3_DATA_TRANS_BLOCKS(old_dir->i_sb) +
EXT3_INDEX_EXTRA_TRANS_BLOCKS + 2);
if (IS_ERR(handle))
return PTR_ERR(handle);
if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir))
handle->h_sync = 1;
old_bh = ext3_find_entry(old_dir, &old_dentry->d_name, &old_de);
/*
* Check for inode number is _not_ due to possible IO errors.
* We might rmdir the source, keep it as pwd of some process
* and merrily kill the link to whatever was created under the
* same name. Goodbye sticky bit ;-<
*/
old_inode = old_dentry->d_inode;
retval = -ENOENT;
if (!old_bh || le32_to_cpu(old_de->inode) != old_inode->i_ino)
goto end_rename;
new_inode = new_dentry->d_inode;
new_bh = ext3_find_entry(new_dir, &new_dentry->d_name, &new_de);
if (new_bh) {
if (!new_inode) {
brelse (new_bh);
new_bh = NULL;
}
}
if (S_ISDIR(old_inode->i_mode)) {
if (new_inode) {
retval = -ENOTEMPTY;
if (!empty_dir (new_inode))
goto end_rename;
}
retval = -EIO;
dir_bh = ext3_dir_bread(handle, old_inode, 0, 0, &retval);
if (!dir_bh)
goto end_rename;
if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino)
goto end_rename;
retval = -EMLINK;
if (!new_inode && new_dir!=old_dir &&
new_dir->i_nlink >= EXT3_LINK_MAX)
goto end_rename;
}
if (!new_bh) {
retval = ext3_add_entry (handle, new_dentry, old_inode);
if (retval)
goto end_rename;
} else {
BUFFER_TRACE(new_bh, "get write access");
retval = ext3_journal_get_write_access(handle, new_bh);
if (retval)
goto journal_error;
new_de->inode = cpu_to_le32(old_inode->i_ino);
if (EXT3_HAS_INCOMPAT_FEATURE(new_dir->i_sb,
EXT3_FEATURE_INCOMPAT_FILETYPE))
new_de->file_type = old_de->file_type;
new_dir->i_version++;
new_dir->i_ctime = new_dir->i_mtime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, new_dir);
BUFFER_TRACE(new_bh, "call ext3_journal_dirty_metadata");
retval = ext3_journal_dirty_metadata(handle, new_bh);
if (retval)
goto journal_error;
brelse(new_bh);
new_bh = NULL;
}
/*
* Like most other Unix systems, set the ctime for inodes on a
* rename.
*/
old_inode->i_ctime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, old_inode);
/*
* ok, that's it
*/
if (le32_to_cpu(old_de->inode) != old_inode->i_ino ||
old_de->name_len != old_dentry->d_name.len ||
strncmp(old_de->name, old_dentry->d_name.name, old_de->name_len) ||
(retval = ext3_delete_entry(handle, old_dir,
old_de, old_bh)) == -ENOENT) {
/* old_de could have moved from under us during htree split, so
* make sure that we are deleting the right entry. We might
* also be pointing to a stale entry in the unused part of
* old_bh so just checking inum and the name isn't enough. */
struct buffer_head *old_bh2;
struct ext3_dir_entry_2 *old_de2;
old_bh2 = ext3_find_entry(old_dir, &old_dentry->d_name,
&old_de2);
if (old_bh2) {
retval = ext3_delete_entry(handle, old_dir,
old_de2, old_bh2);
brelse(old_bh2);
}
}
if (retval) {
ext3_warning(old_dir->i_sb, "ext3_rename",
"Deleting old file (%lu), %d, error=%d",
old_dir->i_ino, old_dir->i_nlink, retval);
}
if (new_inode) {
drop_nlink(new_inode);
new_inode->i_ctime = CURRENT_TIME_SEC;
}
old_dir->i_ctime = old_dir->i_mtime = CURRENT_TIME_SEC;
ext3_update_dx_flag(old_dir);
if (dir_bh) {
BUFFER_TRACE(dir_bh, "get_write_access");
retval = ext3_journal_get_write_access(handle, dir_bh);
if (retval)
goto journal_error;
PARENT_INO(dir_bh->b_data) = cpu_to_le32(new_dir->i_ino);
BUFFER_TRACE(dir_bh, "call ext3_journal_dirty_metadata");
retval = ext3_journal_dirty_metadata(handle, dir_bh);
if (retval) {
journal_error:
ext3_std_error(new_dir->i_sb, retval);
goto end_rename;
}
drop_nlink(old_dir);
if (new_inode) {
drop_nlink(new_inode);
} else {
inc_nlink(new_dir);
ext3_update_dx_flag(new_dir);
ext3_mark_inode_dirty(handle, new_dir);
}
}
ext3_mark_inode_dirty(handle, old_dir);
if (new_inode) {
ext3_mark_inode_dirty(handle, new_inode);
if (!new_inode->i_nlink)
ext3_orphan_add(handle, new_inode);
if (ext3_should_writeback_data(new_inode))
flush_file = 1;
}
retval = 0;
end_rename:
brelse (dir_bh);
brelse (old_bh);
brelse (new_bh);
ext3_journal_stop(handle);
if (retval == 0 && flush_file)
filemap_flush(old_inode->i_mapping);
return retval;
}
/*
* directories can handle most operations...
*/
const struct inode_operations ext3_dir_inode_operations = {
.create = ext3_create,
.lookup = ext3_lookup,
.link = ext3_link,
.unlink = ext3_unlink,
.symlink = ext3_symlink,
.mkdir = ext3_mkdir,
.rmdir = ext3_rmdir,
.mknod = ext3_mknod,
.tmpfile = ext3_tmpfile,
.rename = ext3_rename,
.setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
.get_acl = ext3_get_acl,
};
const struct inode_operations ext3_special_inode_operations = {
.setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext3_listxattr,
.removexattr = generic_removexattr,
#endif
.get_acl = ext3_get_acl,
};