AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
23e353c8a6
kernel_optimize_test/drivers/crypto/Kconfig

87 lines
2.4 KiB
Plaintext
Raw Normal View History

Use menuconfig objects: crypto hw Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:39:36 +08:00
menuconfig CRYPTO_HW
bool "Hardware crypto devices"
default y
Add some help texts to recently-introduced kconfig items Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18 18:56:21 +08:00
---help---
Say Y here to get to see options for hardware crypto devices and
processors. This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
Use menuconfig objects: crypto hw Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:39:36 +08:00
if CRYPTO_HW
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config CRYPTO_DEV_PADLOCK
[CRYPTO] padlock: Make CRYPTO_DEV_PADLOCK a tristate again Turning it into a boolean was unnecessary and caused ALGAPI to be pinned down as a boolean to. This patch makes it a tristate again. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-18 11:17:22 +08:00
tristate "Support for VIA PadLock ACE"
[CRYPTO] api: Split out low-level API The crypto API is made up of the part facing users such as IPsec and the low-level part which is used by cryptographic entities such as algorithms. This patch splits out the latter so that the two APIs are more clearly delineated. As a bonus the low-level API can now be modularised if all algorithms are built as modules. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 19:08:13 +08:00
depends on X86_32
select CRYPTO_ALGAPI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine)
[CRYPTO] padlock: Get rid of padlock-generic.c Merge padlock-generic.c into padlock-aes.c and compile AES as a standalone module. We won't make a monolithic padlock.ko with all supported algorithms, instead we'll compile each driver into its own module. Signed-off-by: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-06 20:46:20 +08:00
that provides instructions for very fast cryptographic
operations with supported algorithms.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
The instructions are used only when the CPU supports them.
[CRYPTO] padlock: Helper module padlock.ko Compile a helper module padlock.ko that will try to autoload all configured padlock algorithms. This also provides backward compatibility with the ancient times before padlock.ko was renamed to padlock-aes.ko Signed-off-by: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-06 20:50:30 +08:00
Otherwise software encryption is used.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config CRYPTO_DEV_PADLOCK_AES
[CRYPTO] padlock: Get rid of padlock-generic.c Merge padlock-generic.c into padlock-aes.c and compile AES as a standalone module. We won't make a monolithic padlock.ko with all supported algorithms, instead we'll compile each driver into its own module. Signed-off-by: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-06 20:46:20 +08:00
tristate "PadLock driver for AES algorithm"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
depends on CRYPTO_DEV_PADLOCK
[CRYPTO] padlock: Added block cipher versions of CBC/ECB This patch adds block cipher algorithms for cbc(aes) and ecb(aes) for the PadLock device. Once all users to the old cipher type have been converted the old cbc/ecb PadLock operations will be removed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-21 19:38:42 +08:00
select CRYPTO_BLKCIPHER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Use VIA PadLock for AES algorithm.
[CRYPTO] padlock: Get rid of padlock-generic.c Merge padlock-generic.c into padlock-aes.c and compile AES as a standalone module. We won't make a monolithic padlock.ko with all supported algorithms, instead we'll compile each driver into its own module. Signed-off-by: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-08-06 20:46:20 +08:00
Available in VIA C3 and newer CPUs.
If unsure say M. The compiled module will be
called padlock-aes.ko
[CRYPTO] padlock: Driver for SHA1 / SHA256 algorithms Support for SHA1 / SHA256 algorithms in VIA C7 processors. Signed-off-by: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-07-12 10:29:38 +08:00
config CRYPTO_DEV_PADLOCK_SHA
tristate "PadLock driver for SHA1 and SHA256 algorithms"
depends on CRYPTO_DEV_PADLOCK
select CRYPTO_SHA1
select CRYPTO_SHA256
help
Use VIA PadLock for SHA1/SHA256 algorithms.
Available in VIA C7 and newer processors.
If unsure say M. The compiled module will be
called padlock-sha.ko
[S390] Support for s390 Pseudo Random Number Generator Starting with the z9 the CPU Cryptographic Assist Facility comes with an integrated Pseudo Random Number Generator. The generator creates random numbers by an algorithm similar to the ANSI X9.17 standard. The pseudo-random numbers can be accessed via a character device driver node called /dev/prandom. Similar to /dev/urandom any amount of bytes can be read from the device without blocking. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 04:18:22 +08:00
source "arch/s390/crypto/Kconfig"
[PATCH] crypto: Add support for the Geode LX AES hardware Add a driver to support the AES hardware on the Geode LX processor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-04 16:48:57 +08:00
config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
[CRYPTO] padlock: Remove pointless padlock module When this is compiled in it is run too early to do anything useful: [ 6.052000] padlock: No VIA PadLock drivers have been loaded. [ 6.052000] padlock: Using VIA PadLock ACE for AES algorithm. [ 6.052000] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms. When it's a module it isn't doing anything special, the same functionality can be provided in userspace by "probeall padlock padlock-aes padlock-sha" in modules.conf if it is required. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Michal Ludvig <michal@logix.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-02 20:08:26 +08:00
depends on X86_32 && PCI
[PATCH] crypto: Add support for the Geode LX AES hardware Add a driver to support the AES hardware on the Geode LX processor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-04 16:48:57 +08:00
select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER
help
Say 'Y' here to use the AMD Geode LX processor on-board AES
Fix trivial typos in Kconfig* files Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 13:12:20 +08:00
engine for the CryptoAPI AES algorithm.
[PATCH] crypto: Add support for the Geode LX AES hardware Add a driver to support the AES hardware on the Geode LX processor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-10-04 16:48:57 +08:00
To compile this driver as a module, choose M here: the module
will be called geode-aes.
[S390] Kconfig: use common Kconfig files for s390. Disband drivers/s390/Kconfig, use the common Kconfig files. The s390 specific config options from drivers/s390/Kconfig are moved to the respective common Kconfig files. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 21:46:00 +08:00
config ZCRYPT
tristate "Support for PCI-attached cryptographic adapters"
depends on S390
select ZCRYPT_MONOLITHIC if ZCRYPT="y"
help
Select this option if you want to use a PCI-attached cryptographic
adapter like:
+ PCI Cryptographic Accelerator (PCICA)
+ PCI Cryptographic Coprocessor (PCICC)
+ PCI-X Cryptographic Coprocessor (PCIXCC)
+ Crypto Express2 Coprocessor (CEX2C)
+ Crypto Express2 Accelerator (CEX2A)
config ZCRYPT_MONOLITHIC
bool "Monolithic zcrypt module"
depends on ZCRYPT="m"
help
Select this option if you want to have a single module z90crypt.ko
that contains all parts of the crypto device driver (ap bus,
request router and all the card drivers).
Use menuconfig objects: crypto hw Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:39:36 +08:00
endif # CRYPTO_HW
Copy Permalink