AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
2a298679b4
kernel_optimize_test/drivers/atm/he.c

2870 lines
76 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
he.c
ForeRunnerHE ATM Adapter driver for ATM on Linux
Copyright (C) 1999-2001 Naval Research Laboratory
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
he.c
ForeRunnerHE ATM Adapter driver for ATM on Linux
Copyright (C) 1999-2001 Naval Research Laboratory
Permission to use, copy, modify and distribute this software and its
documentation is hereby granted, provided that both the copyright
notice and this permission notice appear in all copies of the software,
derivative works or modified versions, and any portions thereof, and
that both notices appear in supporting documentation.
NRL ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION AND
DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER
RESULTING FROM THE USE OF THIS SOFTWARE.
This driver was written using the "Programmer's Reference Manual for
ForeRunnerHE(tm)", MANU0361-01 - Rev. A, 08/21/98.
AUTHORS:
chas williams <chas@cmf.nrl.navy.mil>
eric kinzie <ekinzie@cmf.nrl.navy.mil>
NOTES:
4096 supported 'connections'
group 0 is used for all traffic
interrupt queue 0 is used for all interrupts
aal0 support (based on work from ulrich.u.muller@nokia.com)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
[ATM]: [he] Use the DMA_32BIT_MASK constant from dma-mapping.h Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-25 09:55:35 +08:00
#include <linux/dma-mapping.h>
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
#include <linux/bitmap.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <linux/atmdev.h>
#include <linux/atm.h>
#include <linux/sonet.h>
#undef USE_SCATTERGATHER
#undef USE_CHECKSUM_HW /* still confused about this */
/* #undef HE_DEBUG */
#include "he.h"
#include "suni.h"
#include <linux/atm_he.h>
#define hprintk(fmt,args...) printk(KERN_ERR DEV_LABEL "%d: " fmt, he_dev->number , ##args)
#ifdef HE_DEBUG
#define HPRINTK(fmt,args...) printk(KERN_DEBUG DEV_LABEL "%d: " fmt, he_dev->number , ##args)
#else /* !HE_DEBUG */
#define HPRINTK(fmt,args...) do { } while (0)
#endif /* HE_DEBUG */
/* declarations */
static int he_open(struct atm_vcc *vcc);
static void he_close(struct atm_vcc *vcc);
static int he_send(struct atm_vcc *vcc, struct sk_buff *skb);
static int he_ioctl(struct atm_dev *dev, unsigned int cmd, void __user *arg);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t he_irq_handler(int irq, void *dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void he_tasklet(unsigned long data);
static int he_proc_read(struct atm_dev *dev,loff_t *pos,char *page);
static int he_start(struct atm_dev *dev);
static void he_stop(struct he_dev *dev);
static void he_phy_put(struct atm_dev *, unsigned char, unsigned long);
static unsigned char he_phy_get(struct atm_dev *, unsigned long);
static u8 read_prom_byte(struct he_dev *he_dev, int addr);
/* globals */
static struct he_dev *he_devs;
module_param: make bool parameters really bool (drivers & misc) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 07:02:20 +08:00
static bool disable64;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static short nvpibits = -1;
static short nvcibits = -1;
static short rx_skb_reserve = 16;
atm:he - Change 1 to true for bool type variable. The variable irq_coalesce is bool type. So assign the value true instead of 1. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-26 03:47:23 +08:00
static bool irq_coalesce = true;
atm:he - Do not initialise statics to 0. According to <stdbool.h> false is always '0' and Static variables are initialised to 0 by GCC. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-04 22:41:00 +08:00
static bool sdh;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Read from EEPROM = 0000 0011b */
static unsigned int readtab[] = {
CS_HIGH | CLK_HIGH,
CS_LOW | CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW,
CLK_HIGH, /* 0 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH, /* 1 */
CLK_LOW | SI_HIGH,
CLK_HIGH | SI_HIGH /* 1 */
};
/* Clock to read from/write to the EEPROM */
static unsigned int clocktab[] = {
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW,
CLK_HIGH,
CLK_LOW
};
static struct atmdev_ops he_ops =
{
.open = he_open,
.close = he_close,
.ioctl = he_ioctl,
.send = he_send,
.phy_put = he_phy_put,
.phy_get = he_phy_get,
.proc_read = he_proc_read,
.owner = THIS_MODULE
};
#define he_writel(dev, val, reg) do { writel(val, (dev)->membase + (reg)); wmb(); } while (0)
#define he_readl(dev, reg) readl((dev)->membase + (reg))
/* section 2.12 connection memory access */
static __inline__ void
he_writel_internal(struct he_dev *he_dev, unsigned val, unsigned addr,
unsigned flags)
{
he_writel(he_dev, val, CON_DAT);
(void) he_readl(he_dev, CON_DAT); /* flush posted writes */
he_writel(he_dev, flags | CON_CTL_WRITE | CON_CTL_ADDR(addr), CON_CTL);
while (he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
}
#define he_writel_rcm(dev, val, reg) \
he_writel_internal(dev, val, reg, CON_CTL_RCM)
#define he_writel_tcm(dev, val, reg) \
he_writel_internal(dev, val, reg, CON_CTL_TCM)
#define he_writel_mbox(dev, val, reg) \
he_writel_internal(dev, val, reg, CON_CTL_MBOX)
static unsigned
he_readl_internal(struct he_dev *he_dev, unsigned addr, unsigned flags)
{
he_writel(he_dev, flags | CON_CTL_READ | CON_CTL_ADDR(addr), CON_CTL);
while (he_readl(he_dev, CON_CTL) & CON_CTL_BUSY);
return he_readl(he_dev, CON_DAT);
}
#define he_readl_rcm(dev, reg) \
he_readl_internal(dev, reg, CON_CTL_RCM)
#define he_readl_tcm(dev, reg) \
he_readl_internal(dev, reg, CON_CTL_TCM)
#define he_readl_mbox(dev, reg) \
he_readl_internal(dev, reg, CON_CTL_MBOX)
/* figure 2.2 connection id */
#define he_mkcid(dev, vpi, vci) (((vpi << (dev)->vcibits) | vci) & 0x1fff)
/* 2.5.1 per connection transmit state registers */
#define he_writel_tsr0(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 0)
#define he_readl_tsr0(dev, cid) \
he_readl_tcm(dev, CONFIG_TSRA | (cid << 3) | 0)
#define he_writel_tsr1(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 1)
#define he_writel_tsr2(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 2)
#define he_writel_tsr3(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 3)
#define he_writel_tsr4(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 4)
/* from page 2-20
*
* NOTE While the transmit connection is active, bits 23 through 0
* of this register must not be written by the host. Byte
* enables should be used during normal operation when writing
* the most significant byte.
*/
#define he_writel_tsr4_upper(dev, val, cid) \
he_writel_internal(dev, val, CONFIG_TSRA | (cid << 3) | 4, \
CON_CTL_TCM \
| CON_BYTE_DISABLE_2 \
| CON_BYTE_DISABLE_1 \
| CON_BYTE_DISABLE_0)
#define he_readl_tsr4(dev, cid) \
he_readl_tcm(dev, CONFIG_TSRA | (cid << 3) | 4)
#define he_writel_tsr5(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 5)
#define he_writel_tsr6(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 6)
#define he_writel_tsr7(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRA | (cid << 3) | 7)
#define he_writel_tsr8(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRB | (cid << 2) | 0)
#define he_writel_tsr9(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRB | (cid << 2) | 1)
#define he_writel_tsr10(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRB | (cid << 2) | 2)
#define he_writel_tsr11(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRB | (cid << 2) | 3)
#define he_writel_tsr12(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRC | (cid << 1) | 0)
#define he_writel_tsr13(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRC | (cid << 1) | 1)
#define he_writel_tsr14(dev, val, cid) \
he_writel_tcm(dev, val, CONFIG_TSRD | cid)
#define he_writel_tsr14_upper(dev, val, cid) \
he_writel_internal(dev, val, CONFIG_TSRD | cid, \
CON_CTL_TCM \
| CON_BYTE_DISABLE_2 \
| CON_BYTE_DISABLE_1 \
| CON_BYTE_DISABLE_0)
/* 2.7.1 per connection receive state registers */
#define he_writel_rsr0(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 0)
#define he_readl_rsr0(dev, cid) \
he_readl_rcm(dev, 0x00000 | (cid << 3) | 0)
#define he_writel_rsr1(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 1)
#define he_writel_rsr2(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 2)
#define he_writel_rsr3(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 3)
#define he_writel_rsr4(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 4)
#define he_writel_rsr5(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 5)
#define he_writel_rsr6(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 6)
#define he_writel_rsr7(dev, val, cid) \
he_writel_rcm(dev, val, 0x00000 | (cid << 3) | 7)
static __inline__ struct atm_vcc*
__find_vcc(struct he_dev *he_dev, unsigned cid)
{
struct hlist_head *head;
struct atm_vcc *vcc;
struct sock *s;
short vpi;
int vci;
vpi = cid >> he_dev->vcibits;
vci = cid & ((1 << he_dev->vcibits) - 1);
head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
sk_for_each(s, head) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
vcc = atm_sk(s);
if (vcc->dev == he_dev->atm_dev &&
vcc->vci == vci && vcc->vpi == vpi &&
vcc->qos.rxtp.traffic_class != ATM_NONE) {
return vcc;
}
}
return NULL;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_init_one(struct pci_dev *pci_dev,
const struct pci_device_id *pci_ent)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *atm_dev = NULL;
struct he_dev *he_dev = NULL;
int err = 0;
[ATM]: [he] This patch removes the ancient version string. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 15:16:45 +08:00
printk(KERN_INFO "ATM he driver\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (pci_enable_device(pci_dev))
return -EIO;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
if (dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)) != 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_WARNING "he: no suitable dma available\n");
err = -EIO;
goto init_one_failure;
}
atm: correct sysfs 'device' link creation and parent relationships The ATM subsystem was incorrectly creating the 'device' link for ATM nodes in sysfs. This led to incorrect device/parent relationships exposed by sysfs and udev. Instead of rolling the 'device' link by hand in the generic ATM code, pass each ATM driver's bus device down to the sysfs code and let sysfs do this stuff correctly. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09 03:40:47 +08:00
atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!atm_dev) {
err = -ENODEV;
goto init_one_failure;
}
pci_set_drvdata(pci_dev, atm_dev);
[ATM]: kmalloc to kzalloc patches for drivers/atm Signed-off-by: Om Narasimhan <om.turyx@gmail.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-04 07:27:18 +08:00
he_dev = kzalloc(sizeof(struct he_dev),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
GFP_KERNEL);
if (!he_dev) {
err = -ENOMEM;
goto init_one_failure;
}
he_dev->pci_dev = pci_dev;
he_dev->atm_dev = atm_dev;
he_dev->atm_dev->dev_data = he_dev;
atm_dev->dev_data = he_dev;
he_dev->number = atm_dev->number;
[ATM]: [he] initialize lock and tasklet earlier if you are lucky (unlucky?) enough to have shared interrupts, the interrupt handler can be called before the tasklet and lock are ready for use. Signed-off-by: chas williams <chas@cmf.nrl.navy.mil> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-27 11:03:16 +08:00
tasklet_init(&he_dev->tasklet, he_tasklet, (unsigned long) he_dev);
spin_lock_init(&he_dev->global_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_start(atm_dev)) {
he_stop(he_dev);
err = -ENODEV;
goto init_one_failure;
}
he_dev->next = NULL;
if (he_devs)
he_dev->next = he_devs;
he_devs = he_dev;
return 0;
init_one_failure:
if (atm_dev)
atm_dev_deregister(atm_dev);
[ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-03 04:04:07 +08:00
kfree(he_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_disable_device(pci_dev);
return err;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void he_remove_one(struct pci_dev *pci_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct atm_dev *atm_dev;
struct he_dev *he_dev;
atm_dev = pci_get_drvdata(pci_dev);
he_dev = HE_DEV(atm_dev);
/* need to remove from he_devs */
he_stop(he_dev);
atm_dev_deregister(atm_dev);
kfree(he_dev);
pci_disable_device(pci_dev);
}
static unsigned
rate_to_atmf(unsigned rate) /* cps to atm forum format */
{
#define NONZERO (1 << 14)
unsigned exp = 0;
if (rate == 0)
return 0;
rate <<= 9;
while (rate > 0x3ff) {
++exp;
rate >>= 1;
}
return (NONZERO | (exp << 9) | (rate & 0x1ff));
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void he_init_rx_lbfp0(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned i, lbm_offset, lbufd_index, lbuf_addr, lbuf_count;
unsigned lbufs_per_row = he_dev->cells_per_row / he_dev->cells_per_lbuf;
unsigned lbuf_bufsize = he_dev->cells_per_lbuf * ATM_CELL_PAYLOAD;
unsigned row_offset = he_dev->r0_startrow * he_dev->bytes_per_row;
lbufd_index = 0;
lbm_offset = he_readl(he_dev, RCMLBM_BA);
he_writel(he_dev, lbufd_index, RLBF0_H);
for (i = 0, lbuf_count = 0; i < he_dev->r0_numbuffs; ++i) {
lbufd_index += 2;
lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
if (++lbuf_count == lbufs_per_row) {
lbuf_count = 0;
row_offset += he_dev->bytes_per_row;
}
lbm_offset += 4;
}
he_writel(he_dev, lbufd_index - 2, RLBF0_T);
he_writel(he_dev, he_dev->r0_numbuffs, RLBF0_C);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void he_init_rx_lbfp1(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned i, lbm_offset, lbufd_index, lbuf_addr, lbuf_count;
unsigned lbufs_per_row = he_dev->cells_per_row / he_dev->cells_per_lbuf;
unsigned lbuf_bufsize = he_dev->cells_per_lbuf * ATM_CELL_PAYLOAD;
unsigned row_offset = he_dev->r1_startrow * he_dev->bytes_per_row;
lbufd_index = 1;
lbm_offset = he_readl(he_dev, RCMLBM_BA) + (2 * lbufd_index);
he_writel(he_dev, lbufd_index, RLBF1_H);
for (i = 0, lbuf_count = 0; i < he_dev->r1_numbuffs; ++i) {
lbufd_index += 2;
lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
if (++lbuf_count == lbufs_per_row) {
lbuf_count = 0;
row_offset += he_dev->bytes_per_row;
}
lbm_offset += 4;
}
he_writel(he_dev, lbufd_index - 2, RLBF1_T);
he_writel(he_dev, he_dev->r1_numbuffs, RLBF1_C);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void he_init_tx_lbfp(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned i, lbm_offset, lbufd_index, lbuf_addr, lbuf_count;
unsigned lbufs_per_row = he_dev->cells_per_row / he_dev->cells_per_lbuf;
unsigned lbuf_bufsize = he_dev->cells_per_lbuf * ATM_CELL_PAYLOAD;
unsigned row_offset = he_dev->tx_startrow * he_dev->bytes_per_row;
lbufd_index = he_dev->r0_numbuffs + he_dev->r1_numbuffs;
lbm_offset = he_readl(he_dev, RCMLBM_BA) + (2 * lbufd_index);
he_writel(he_dev, lbufd_index, TLBF_H);
for (i = 0, lbuf_count = 0; i < he_dev->tx_numbuffs; ++i) {
lbufd_index += 1;
lbuf_addr = (row_offset + (lbuf_count * lbuf_bufsize)) / 32;
he_writel_rcm(he_dev, lbuf_addr, lbm_offset);
he_writel_rcm(he_dev, lbufd_index, lbm_offset + 1);
if (++lbuf_count == lbufs_per_row) {
lbuf_count = 0;
row_offset += he_dev->bytes_per_row;
}
lbm_offset += 2;
}
he_writel(he_dev, lbufd_index - 1, TLBF_T);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_init_tpdrq(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->tpdrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev,
CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq),
&he_dev->tpdrq_phys, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tpdrq_base == NULL) {
hprintk("failed to alloc tpdrq\n");
return -ENOMEM;
}
he_dev->tpdrq_tail = he_dev->tpdrq_base;
he_dev->tpdrq_head = he_dev->tpdrq_base;
he_writel(he_dev, he_dev->tpdrq_phys, TPDRQ_B_H);
he_writel(he_dev, 0, TPDRQ_T);
he_writel(he_dev, CONFIG_TPDRQ_SIZE - 1, TPDRQ_S);
return 0;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static void he_init_cs_block(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned clock, rate, delta;
int reg;
/* 5.1.7 cs block initialization */
for (reg = 0; reg < 0x20; ++reg)
he_writel_mbox(he_dev, 0x0, CS_STTIM0 + reg);
/* rate grid timer reload values */
clock = he_is622(he_dev) ? 66667000 : 50000000;
rate = he_dev->atm_dev->link_rate;
delta = rate / 16 / 2;
for (reg = 0; reg < 0x10; ++reg) {
/* 2.4 internal transmit function
*
* we initialize the first row in the rate grid.
* values are period (in clock cycles) of timer
*/
unsigned period = clock / rate;
he_writel_mbox(he_dev, period, CS_TGRLD0 + reg);
rate -= delta;
}
if (he_is622(he_dev)) {
/* table 5.2 (4 cells per lbuf) */
he_writel_mbox(he_dev, 0x000800fa, CS_ERTHR0);
he_writel_mbox(he_dev, 0x000c33cb, CS_ERTHR1);
he_writel_mbox(he_dev, 0x0010101b, CS_ERTHR2);
he_writel_mbox(he_dev, 0x00181dac, CS_ERTHR3);
he_writel_mbox(he_dev, 0x00280600, CS_ERTHR4);
/* table 5.3, 5.4, 5.5, 5.6, 5.7 */
he_writel_mbox(he_dev, 0x023de8b3, CS_ERCTL0);
he_writel_mbox(he_dev, 0x1801, CS_ERCTL1);
he_writel_mbox(he_dev, 0x68b3, CS_ERCTL2);
he_writel_mbox(he_dev, 0x1280, CS_ERSTAT0);
he_writel_mbox(he_dev, 0x68b3, CS_ERSTAT1);
he_writel_mbox(he_dev, 0x14585, CS_RTFWR);
he_writel_mbox(he_dev, 0x4680, CS_RTATR);
/* table 5.8 */
he_writel_mbox(he_dev, 0x00159ece, CS_TFBSET);
he_writel_mbox(he_dev, 0x68b3, CS_WCRMAX);
he_writel_mbox(he_dev, 0x5eb3, CS_WCRMIN);
he_writel_mbox(he_dev, 0xe8b3, CS_WCRINC);
he_writel_mbox(he_dev, 0xdeb3, CS_WCRDEC);
he_writel_mbox(he_dev, 0x68b3, CS_WCRCEIL);
/* table 5.9 */
he_writel_mbox(he_dev, 0x5, CS_OTPPER);
he_writel_mbox(he_dev, 0x14, CS_OTWPER);
} else {
/* table 5.1 (4 cells per lbuf) */
he_writel_mbox(he_dev, 0x000400ea, CS_ERTHR0);
he_writel_mbox(he_dev, 0x00063388, CS_ERTHR1);
he_writel_mbox(he_dev, 0x00081018, CS_ERTHR2);
he_writel_mbox(he_dev, 0x000c1dac, CS_ERTHR3);
he_writel_mbox(he_dev, 0x0014051a, CS_ERTHR4);
/* table 5.3, 5.4, 5.5, 5.6, 5.7 */
he_writel_mbox(he_dev, 0x0235e4b1, CS_ERCTL0);
he_writel_mbox(he_dev, 0x4701, CS_ERCTL1);
he_writel_mbox(he_dev, 0x64b1, CS_ERCTL2);
he_writel_mbox(he_dev, 0x1280, CS_ERSTAT0);
he_writel_mbox(he_dev, 0x64b1, CS_ERSTAT1);
he_writel_mbox(he_dev, 0xf424, CS_RTFWR);
he_writel_mbox(he_dev, 0x4680, CS_RTATR);
/* table 5.8 */
he_writel_mbox(he_dev, 0x000563b7, CS_TFBSET);
he_writel_mbox(he_dev, 0x64b1, CS_WCRMAX);
he_writel_mbox(he_dev, 0x5ab1, CS_WCRMIN);
he_writel_mbox(he_dev, 0xe4b1, CS_WCRINC);
he_writel_mbox(he_dev, 0xdab1, CS_WCRDEC);
he_writel_mbox(he_dev, 0x64b1, CS_WCRCEIL);
/* table 5.9 */
he_writel_mbox(he_dev, 0x6, CS_OTPPER);
he_writel_mbox(he_dev, 0x1e, CS_OTWPER);
}
he_writel_mbox(he_dev, 0x8, CS_OTTLIM);
for (reg = 0; reg < 0x8; ++reg)
he_writel_mbox(he_dev, 0x0, CS_HGRRT0 + reg);
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_init_cs_block_rcm(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned (*rategrid)[16][16];
unsigned rate, delta;
int i, j, reg;
unsigned rate_atmf, exp, man;
unsigned long long rate_cps;
int mult, buf, buf_limit = 4;
rategrid = kmalloc( sizeof(unsigned) * 16 * 16, GFP_KERNEL);
if (!rategrid)
return -ENOMEM;
/* initialize rate grid group table */
for (reg = 0x0; reg < 0xff; ++reg)
he_writel_rcm(he_dev, 0x0, CONFIG_RCMABR + reg);
/* initialize rate controller groups */
for (reg = 0x100; reg < 0x1ff; ++reg)
he_writel_rcm(he_dev, 0x0, CONFIG_RCMABR + reg);
/* initialize tNrm lookup table */
/* the manual makes reference to a routine in a sample driver
for proper configuration; fortunately, we only need this
in order to support abr connection */
/* initialize rate to group table */
rate = he_dev->atm_dev->link_rate;
delta = rate / 32;
/*
* 2.4 transmit internal functions
*
* we construct a copy of the rate grid used by the scheduler
* in order to construct the rate to group table below
*/
for (j = 0; j < 16; j++) {
(*rategrid)[0][j] = rate;
rate -= delta;
}
for (i = 1; i < 16; i++)
for (j = 0; j < 16; j++)
if (i > 14)
(*rategrid)[i][j] = (*rategrid)[i - 1][j] / 4;
else
(*rategrid)[i][j] = (*rategrid)[i - 1][j] / 2;
/*
* 2.4 transmit internal function
*
* this table maps the upper 5 bits of exponent and mantissa
* of the atm forum representation of the rate into an index
* on rate grid
*/
rate_atmf = 0;
while (rate_atmf < 0x400) {
man = (rate_atmf & 0x1f) << 4;
exp = rate_atmf >> 5;
/*
instead of '/ 512', use '>> 9' to prevent a call
to divdu3 on x86 platforms
*/
rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
if (rate_cps < 10)
rate_cps = 10; /* 2.2.1 minimum payload rate is 10 cps */
for (i = 255; i > 0; i--)
if ((*rategrid)[i/16][i%16] >= rate_cps)
break; /* pick nearest rate instead? */
/*
* each table entry is 16 bits: (rate grid index (8 bits)
* and a buffer limit (8 bits)
* there are two table entries in each 32-bit register
*/
#ifdef notdef
buf = rate_cps * he_dev->tx_numbuffs /
(he_dev->atm_dev->link_rate * 2);
#else
/* this is pretty, but avoids _divdu3 and is mostly correct */
mult = he_dev->atm_dev->link_rate / ATM_OC3_PCR;
if (rate_cps > (272 * mult))
buf = 4;
else if (rate_cps > (204 * mult))
buf = 3;
else if (rate_cps > (136 * mult))
buf = 2;
else if (rate_cps > (68 * mult))
buf = 1;
else
buf = 0;
#endif
if (buf > buf_limit)
buf = buf_limit;
reg = (reg << 16) | ((i << 8) | buf);
#define RTGTBL_OFFSET 0x400
if (rate_atmf & 0x1)
he_writel_rcm(he_dev, reg,
CONFIG_RCMABR + RTGTBL_OFFSET + (rate_atmf >> 1));
++rate_atmf;
}
kfree(rategrid);
return 0;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_init_group(struct he_dev *he_dev, int group)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
struct he_buff *heb, *next;
dma_addr_t mapping;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int i;
atm: [he] remove small buffer allocation/handling code Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:04:59 +08:00
he_writel(he_dev, 0x0, G0_RBPS_S + (group * 32));
he_writel(he_dev, 0x0, G0_RBPS_T + (group * 32));
he_writel(he_dev, 0x0, G0_RBPS_QI + (group * 32));
he_writel(he_dev, RBP_THRESH(0x1) | RBP_QSIZE(0x0),
G0_RBPS_BS + (group * 32));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
/* bitmap table */
he_dev->rbpl_table = kmalloc(BITS_TO_LONGS(RBPL_TABLE_SIZE)
* sizeof(unsigned long), GFP_KERNEL);
if (!he_dev->rbpl_table) {
hprintk("unable to allocate rbpl bitmap table\n");
return -ENOMEM;
}
bitmap_zero(he_dev->rbpl_table, RBPL_TABLE_SIZE);
/* rbpl_virt 64-bit pointers */
he_dev->rbpl_virt = kmalloc(RBPL_TABLE_SIZE
* sizeof(struct he_buff *), GFP_KERNEL);
if (!he_dev->rbpl_virt) {
hprintk("unable to allocate rbpl virt table\n");
goto out_free_rbpl_table;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* large buffer pool */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->rbpl_pool = dma_pool_create("rbpl", &he_dev->pci_dev->dev,
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
CONFIG_RBPL_BUFSIZE, 64, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbpl_pool == NULL) {
hprintk("unable to create rbpl pool\n");
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
goto out_free_rbpl_virt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->rbpl_base = dma_zalloc_coherent(&he_dev->pci_dev->dev,
CONFIG_RBPL_SIZE * sizeof(struct he_rbp),
&he_dev->rbpl_phys, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbpl_base == NULL) {
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
hprintk("failed to alloc rbpl_base\n");
goto out_destroy_rbpl_pool;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
INIT_LIST_HEAD(&he_dev->rbpl_outstanding);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
for (i = 0; i < CONFIG_RBPL_SIZE; ++i) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
heb = dma_pool_alloc(he_dev->rbpl_pool, GFP_KERNEL, &mapping);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
if (!heb)
goto out_free_rbpl;
heb->mapping = mapping;
list_add(&heb->entry, &he_dev->rbpl_outstanding);
set_bit(i, he_dev->rbpl_table);
he_dev->rbpl_virt[i] = heb;
he_dev->rbpl_hint = i + 1;
he_dev->rbpl_base[i].idx = i << RBP_IDX_OFFSET;
he_dev->rbpl_base[i].phys = mapping + offsetof(struct he_buff, data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
he_dev->rbpl_tail = &he_dev->rbpl_base[CONFIG_RBPL_SIZE - 1];
he_writel(he_dev, he_dev->rbpl_phys, G0_RBPL_S + (group * 32));
he_writel(he_dev, RBPL_MASK(he_dev->rbpl_tail),
G0_RBPL_T + (group * 32));
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
he_writel(he_dev, (CONFIG_RBPL_BUFSIZE - sizeof(struct he_buff))/4,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
G0_RBPL_BS + (group * 32));
he_writel(he_dev,
RBP_THRESH(CONFIG_RBPL_THRESH) |
RBP_QSIZE(CONFIG_RBPL_SIZE - 1) |
RBP_INT_ENB,
G0_RBPL_QI + (group * 32));
/* rx buffer ready queue */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->rbrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev,
CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq),
&he_dev->rbrq_phys, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbrq_base == NULL) {
hprintk("failed to allocate rbrq\n");
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
goto out_free_rbpl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
he_dev->rbrq_head = he_dev->rbrq_base;
he_writel(he_dev, he_dev->rbrq_phys, G0_RBRQ_ST + (group * 16));
he_writel(he_dev, 0, G0_RBRQ_H + (group * 16));
he_writel(he_dev,
RBRQ_THRESH(CONFIG_RBRQ_THRESH) | RBRQ_SIZE(CONFIG_RBRQ_SIZE - 1),
G0_RBRQ_Q + (group * 16));
if (irq_coalesce) {
hprintk("coalescing interrupts\n");
he_writel(he_dev, RBRQ_TIME(768) | RBRQ_COUNT(7),
G0_RBRQ_I + (group * 16));
} else
he_writel(he_dev, RBRQ_TIME(0) | RBRQ_COUNT(1),
G0_RBRQ_I + (group * 16));
/* tx buffer ready queue */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->tbrq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev,
CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq),
&he_dev->tbrq_phys, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tbrq_base == NULL) {
hprintk("failed to allocate tbrq\n");
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
goto out_free_rbpq_base;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
he_dev->tbrq_head = he_dev->tbrq_base;
he_writel(he_dev, he_dev->tbrq_phys, G0_TBRQ_B_T + (group * 16));
he_writel(he_dev, 0, G0_TBRQ_H + (group * 16));
he_writel(he_dev, CONFIG_TBRQ_SIZE - 1, G0_TBRQ_S + (group * 16));
he_writel(he_dev, CONFIG_TBRQ_THRESH, G0_TBRQ_THRESH + (group * 16));
return 0;
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
out_free_rbpq_base:
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_RBRQ_SIZE *
sizeof(struct he_rbrq), he_dev->rbrq_base,
he_dev->rbrq_phys);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
out_free_rbpl:
list_for_each_entry_safe(heb, next, &he_dev->rbpl_outstanding, entry)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->rbpl_pool, heb, heb->mapping);
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_RBPL_SIZE *
sizeof(struct he_rbp), he_dev->rbpl_base,
he_dev->rbpl_phys);
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
out_destroy_rbpl_pool:
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_destroy(he_dev->rbpl_pool);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
out_free_rbpl_virt:
kfree(he_dev->rbpl_virt);
out_free_rbpl_table:
kfree(he_dev->rbpl_table);
atm: dereference of he_dev->rbps_virt in he_init_group() he_dev->rbps_virt or he_dev->rbpl_virt allocation may fail, s them. Make sure that he_init_group() cleans up after errors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-20 15:11:28 +08:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_init_irq(struct he_dev *he_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i;
/* 2.9.3.5 tail offset for each interrupt queue is located after the
end of the interrupt queue */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->irq_base = dma_zalloc_coherent(&he_dev->pci_dev->dev,
(CONFIG_IRQ_SIZE + 1)
* sizeof(struct he_irq),
&he_dev->irq_phys,
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->irq_base == NULL) {
hprintk("failed to allocate irq\n");
return -ENOMEM;
}
he_dev->irq_tailoffset = (unsigned *)
&he_dev->irq_base[CONFIG_IRQ_SIZE];
*he_dev->irq_tailoffset = 0;
he_dev->irq_head = he_dev->irq_base;
he_dev->irq_tail = he_dev->irq_base;
for (i = 0; i < CONFIG_IRQ_SIZE; ++i)
he_dev->irq_base[i].isw = ITYPE_INVALID;
he_writel(he_dev, he_dev->irq_phys, IRQ0_BASE);
he_writel(he_dev,
IRQ_SIZE(CONFIG_IRQ_SIZE) | IRQ_THRESH(CONFIG_IRQ_THRESH),
IRQ0_HEAD);
he_writel(he_dev, IRQ_INT_A | IRQ_TYPE_LINE, IRQ0_CNTL);
he_writel(he_dev, 0x0, IRQ0_DATA);
he_writel(he_dev, 0x0, IRQ1_BASE);
he_writel(he_dev, 0x0, IRQ1_HEAD);
he_writel(he_dev, 0x0, IRQ1_CNTL);
he_writel(he_dev, 0x0, IRQ1_DATA);
he_writel(he_dev, 0x0, IRQ2_BASE);
he_writel(he_dev, 0x0, IRQ2_HEAD);
he_writel(he_dev, 0x0, IRQ2_CNTL);
he_writel(he_dev, 0x0, IRQ2_DATA);
he_writel(he_dev, 0x0, IRQ3_BASE);
he_writel(he_dev, 0x0, IRQ3_HEAD);
he_writel(he_dev, 0x0, IRQ3_CNTL);
he_writel(he_dev, 0x0, IRQ3_DATA);
/* 2.9.3.2 interrupt queue mapping registers */
he_writel(he_dev, 0x0, GRP_10_MAP);
he_writel(he_dev, 0x0, GRP_32_MAP);
he_writel(he_dev, 0x0, GRP_54_MAP);
he_writel(he_dev, 0x0, GRP_76_MAP);
atm: remove IRQF_DISABLED in combination with IRQF_SHARED Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-10 11:42:02 +08:00
if (request_irq(he_dev->pci_dev->irq,
he_irq_handler, IRQF_SHARED, DEV_LABEL, he_dev)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hprintk("irq %d already in use\n", he_dev->pci_dev->irq);
return -EINVAL;
}
he_dev->irq = he_dev->pci_dev->irq;
return 0;
}
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
static int he_start(struct atm_dev *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
struct he_dev *he_dev;
struct pci_dev *pci_dev;
unsigned long membase;
u16 command;
u32 gen_cntl_0, host_cntl, lb_swap;
u8 cache_size, timer;
unsigned err;
unsigned int status, reg;
int i, group;
he_dev = HE_DEV(dev);
pci_dev = he_dev->pci_dev;
membase = pci_resource_start(pci_dev, 0);
HPRINTK("membase = 0x%lx irq = %d.\n", membase, pci_dev->irq);
/*
* pci bus controller initialization
*/
/* 4.3 pci bus controller-specific initialization */
if (pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0) != 0) {
hprintk("can't read GEN_CNTL_0\n");
return -EINVAL;
}
gen_cntl_0 |= (MRL_ENB | MRM_ENB | IGNORE_TIMEOUT);
if (pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0) != 0) {
hprintk("can't write GEN_CNTL_0.\n");
return -EINVAL;
}
if (pci_read_config_word(pci_dev, PCI_COMMAND, &command) != 0) {
hprintk("can't read PCI_COMMAND.\n");
return -EINVAL;
}
command |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
if (pci_write_config_word(pci_dev, PCI_COMMAND, command) != 0) {
hprintk("can't enable memory.\n");
return -EINVAL;
}
if (pci_read_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, &cache_size)) {
hprintk("can't read cache line size?\n");
return -EINVAL;
}
if (cache_size < 16) {
cache_size = 16;
if (pci_write_config_byte(pci_dev, PCI_CACHE_LINE_SIZE, cache_size))
hprintk("can't set cache line size to %d\n", cache_size);
}
if (pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &timer)) {
hprintk("can't read latency timer?\n");
return -EINVAL;
}
/* from table 3.9
*
* LAT_TIMER = 1 + AVG_LAT + BURST_SIZE/BUS_SIZE
*
* AVG_LAT: The average first data read/write latency [maximum 16 clock cycles]
* BURST_SIZE: 1536 bytes (read) for 622, 768 bytes (read) for 155 [192 clock cycles]
*
*/
#define LAT_TIMER 209
if (timer < LAT_TIMER) {
HPRINTK("latency timer was %d, setting to %d\n", timer, LAT_TIMER);
timer = LAT_TIMER;
if (pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, timer))
hprintk("can't set latency timer to %d\n", timer);
}
if (!(he_dev->membase = ioremap(membase, HE_REGMAP_SIZE))) {
hprintk("can't set up page mapping\n");
return -EINVAL;
}
/* 4.4 card reset */
he_writel(he_dev, 0x0, RESET_CNTL);
he_writel(he_dev, 0xff, RESET_CNTL);
atm: he: use mdelay instead of large udelay constants ARM cannot handle udelay for more than 2 miliseconds, and it is rather bad style to block the cpu for 16ms anyway, so let's use msleep instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Cc: linux-atm-general@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14 22:21:36 +08:00
msleep(16); /* 16 ms */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
status = he_readl(he_dev, RESET_CNTL);
if ((status & BOARD_RST_STATUS) == 0) {
hprintk("reset failed\n");
return -EINVAL;
}
/* 4.5 set bus width */
host_cntl = he_readl(he_dev, HOST_CNTL);
if (host_cntl & PCI_BUS_SIZE64)
gen_cntl_0 |= ENBL_64;
else
gen_cntl_0 &= ~ENBL_64;
if (disable64 == 1) {
hprintk("disabling 64-bit pci bus transfers\n");
gen_cntl_0 &= ~ENBL_64;
}
if (gen_cntl_0 & ENBL_64)
hprintk("64-bit transfers enabled\n");
pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0);
/* 4.7 read prom contents */
for (i = 0; i < PROD_ID_LEN; ++i)
he_dev->prod_id[i] = read_prom_byte(he_dev, PROD_ID + i);
he_dev->media = read_prom_byte(he_dev, MEDIA);
for (i = 0; i < 6; ++i)
dev->esi[i] = read_prom_byte(he_dev, MAC_ADDR + i);
atm: he: print MAC via %pM Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:17:56 +08:00
hprintk("%s%s, %pM\n", he_dev->prod_id,
he_dev->media & 0x40 ? "SM" : "MM", dev->esi);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_dev->atm_dev->link_rate = he_is622(he_dev) ?
ATM_OC12_PCR : ATM_OC3_PCR;
/* 4.6 set host endianess */
lb_swap = he_readl(he_dev, LB_SWAP);
if (he_is622(he_dev))
lb_swap &= ~XFER_SIZE; /* 4 cells */
else
lb_swap |= XFER_SIZE; /* 8 cells */
#ifdef __BIG_ENDIAN
lb_swap |= DESC_WR_SWAP | INTR_SWAP | BIG_ENDIAN_HOST;
#else
lb_swap &= ~(DESC_WR_SWAP | INTR_SWAP | BIG_ENDIAN_HOST |
DATA_WR_SWAP | DATA_RD_SWAP | DESC_RD_SWAP);
#endif /* __BIG_ENDIAN */
he_writel(he_dev, lb_swap, LB_SWAP);
/* 4.8 sdram controller initialization */
he_writel(he_dev, he_is622(he_dev) ? LB_64_ENB : 0x0, SDRAM_CTL);
/* 4.9 initialize rnum value */
lb_swap |= SWAP_RNUM_MAX(0xf);
he_writel(he_dev, lb_swap, LB_SWAP);
/* 4.10 initialize the interrupt queues */
if ((err = he_init_irq(he_dev)) != 0)
return err;
/* 4.11 enable pci bus controller state machines */
host_cntl |= (OUTFF_ENB | CMDFF_ENB |
QUICK_RD_RETRY | QUICK_WR_RETRY | PERR_INT_ENB);
he_writel(he_dev, host_cntl, HOST_CNTL);
gen_cntl_0 |= INT_PROC_ENBL|INIT_ENB;
pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0);
/*
* atm network controller initialization
*/
/* 5.1.1 generic configuration state */
/*
* local (cell) buffer memory map
*
* HE155 HE622
*
* 0 ____________1023 bytes 0 _______________________2047 bytes
* | | | | |
* | utility | | rx0 | |
* 5|____________| 255|___________________| u |
* 6| | 256| | t |
* | | | | i |
* | rx0 | row | tx | l |
* | | | | i |
* | | 767|___________________| t |
* 517|____________| 768| | y |
* row 518| | | rx1 | |
* | | 1023|___________________|___|
* | |
* | tx |
* | |
* | |
* 1535|____________|
* 1536| |
* | rx1 |
* 2047|____________|
*
*/
/* total 4096 connections */
he_dev->vcibits = CONFIG_DEFAULT_VCIBITS;
he_dev->vpibits = CONFIG_DEFAULT_VPIBITS;
if (nvpibits != -1 && nvcibits != -1 && nvpibits+nvcibits != HE_MAXCIDBITS) {
hprintk("nvpibits + nvcibits != %d\n", HE_MAXCIDBITS);
return -ENODEV;
}
if (nvpibits != -1) {
he_dev->vpibits = nvpibits;
he_dev->vcibits = HE_MAXCIDBITS - nvpibits;
}
if (nvcibits != -1) {
he_dev->vcibits = nvcibits;
he_dev->vpibits = HE_MAXCIDBITS - nvcibits;
}
if (he_is622(he_dev)) {
he_dev->cells_per_row = 40;
he_dev->bytes_per_row = 2048;
he_dev->r0_numrows = 256;
he_dev->tx_numrows = 512;
he_dev->r1_numrows = 256;
he_dev->r0_startrow = 0;
he_dev->tx_startrow = 256;
he_dev->r1_startrow = 768;
} else {
he_dev->cells_per_row = 20;
he_dev->bytes_per_row = 1024;
he_dev->r0_numrows = 512;
he_dev->tx_numrows = 1018;
he_dev->r1_numrows = 512;
he_dev->r0_startrow = 6;
he_dev->tx_startrow = 518;
he_dev->r1_startrow = 1536;
}
he_dev->cells_per_lbuf = 4;
he_dev->buffer_limit = 4;
he_dev->r0_numbuffs = he_dev->r0_numrows *
he_dev->cells_per_row / he_dev->cells_per_lbuf;
if (he_dev->r0_numbuffs > 2560)
he_dev->r0_numbuffs = 2560;
he_dev->r1_numbuffs = he_dev->r1_numrows *
he_dev->cells_per_row / he_dev->cells_per_lbuf;
if (he_dev->r1_numbuffs > 2560)
he_dev->r1_numbuffs = 2560;
he_dev->tx_numbuffs = he_dev->tx_numrows *
he_dev->cells_per_row / he_dev->cells_per_lbuf;
if (he_dev->tx_numbuffs > 5120)
he_dev->tx_numbuffs = 5120;
/* 5.1.2 configure hardware dependent registers */
he_writel(he_dev,
SLICE_X(0x2) | ARB_RNUM_MAX(0xf) | TH_PRTY(0x3) |
RH_PRTY(0x3) | TL_PRTY(0x2) | RL_PRTY(0x1) |
(he_is622(he_dev) ? BUS_MULTI(0x28) : BUS_MULTI(0x46)) |
(he_is622(he_dev) ? NET_PREF(0x50) : NET_PREF(0x8c)),
LBARB);
he_writel(he_dev, BANK_ON |
(he_is622(he_dev) ? (REF_RATE(0x384) | WIDE_DATA) : REF_RATE(0x150)),
SDRAMCON);
he_writel(he_dev,
(he_is622(he_dev) ? RM_BANK_WAIT(1) : RM_BANK_WAIT(0)) |
RM_RW_WAIT(1), RCMCONFIG);
he_writel(he_dev,
(he_is622(he_dev) ? TM_BANK_WAIT(2) : TM_BANK_WAIT(1)) |
TM_RW_WAIT(1), TCMCONFIG);
he_writel(he_dev, he_dev->cells_per_lbuf * ATM_CELL_PAYLOAD, LB_CONFIG);
he_writel(he_dev,
(he_is622(he_dev) ? UT_RD_DELAY(8) : UT_RD_DELAY(0)) |
(he_is622(he_dev) ? RC_UT_MODE(0) : RC_UT_MODE(1)) |
RX_VALVP(he_dev->vpibits) |
RX_VALVC(he_dev->vcibits), RC_CONFIG);
he_writel(he_dev, DRF_THRESH(0x20) |
(he_is622(he_dev) ? TX_UT_MODE(0) : TX_UT_MODE(1)) |
TX_VCI_MASK(he_dev->vcibits) |
LBFREE_CNT(he_dev->tx_numbuffs), TX_CONFIG);
he_writel(he_dev, 0x0, TXAAL5_PROTO);
he_writel(he_dev, PHY_INT_ENB |
(he_is622(he_dev) ? PTMR_PRE(67 - 1) : PTMR_PRE(50 - 1)),
RH_CONFIG);
/* 5.1.3 initialize connection memory */
for (i = 0; i < TCM_MEM_SIZE; ++i)
he_writel_tcm(he_dev, 0, i);
for (i = 0; i < RCM_MEM_SIZE; ++i)
he_writel_rcm(he_dev, 0, i);
/*
* transmit connection memory map
*
* tx memory
* 0x0 ___________________
* | |
* | |
* | TSRa |
* | |
* | |
* 0x8000|___________________|
* | |
* | TSRb |
* 0xc000|___________________|
* | |
* | TSRc |
* 0xe000|___________________|
* | TSRd |
* 0xf000|___________________|
* | tmABR |
* 0x10000|___________________|
* | |
* | tmTPD |
* |___________________|
* | |
* ....
* 0x1ffff|___________________|
*
*
*/
he_writel(he_dev, CONFIG_TSRB, TSRB_BA);
he_writel(he_dev, CONFIG_TSRC, TSRC_BA);
he_writel(he_dev, CONFIG_TSRD, TSRD_BA);
he_writel(he_dev, CONFIG_TMABR, TMABR_BA);
he_writel(he_dev, CONFIG_TPDBA, TPD_BA);
/*
* receive connection memory map
*
* 0x0 ___________________
* | |
* | |
* | RSRa |
* | |
* | |
* 0x8000|___________________|
* | |
* | rx0/1 |
* | LBM | link lists of local
* | tx | buffer memory
* | |
* 0xd000|___________________|
* | |
* | rmABR |
* 0xe000|___________________|
* | |
* | RSRb |
* |___________________|
* | |
* ....
* 0xffff|___________________|
*/
he_writel(he_dev, 0x08000, RCMLBM_BA);
he_writel(he_dev, 0x0e000, RCMRSRB_BA);
he_writel(he_dev, 0x0d800, RCMABR_BA);
/* 5.1.4 initialize local buffer free pools linked lists */
he_init_rx_lbfp0(he_dev);
he_init_rx_lbfp1(he_dev);
he_writel(he_dev, 0x0, RLBC_H);
he_writel(he_dev, 0x0, RLBC_T);
he_writel(he_dev, 0x0, RLBC_H2);
he_writel(he_dev, 512, RXTHRSH); /* 10% of r0+r1 buffers */
he_writel(he_dev, 256, LITHRSH); /* 5% of r0+r1 buffers */
he_init_tx_lbfp(he_dev);
he_writel(he_dev, he_is622(he_dev) ? 0x104780 : 0x800, UBUFF_BA);
/* 5.1.5 initialize intermediate receive queues */
if (he_is622(he_dev)) {
he_writel(he_dev, 0x000f, G0_INMQ_S);
he_writel(he_dev, 0x200f, G0_INMQ_L);
he_writel(he_dev, 0x001f, G1_INMQ_S);
he_writel(he_dev, 0x201f, G1_INMQ_L);
he_writel(he_dev, 0x002f, G2_INMQ_S);
he_writel(he_dev, 0x202f, G2_INMQ_L);
he_writel(he_dev, 0x003f, G3_INMQ_S);
he_writel(he_dev, 0x203f, G3_INMQ_L);
he_writel(he_dev, 0x004f, G4_INMQ_S);
he_writel(he_dev, 0x204f, G4_INMQ_L);
he_writel(he_dev, 0x005f, G5_INMQ_S);
he_writel(he_dev, 0x205f, G5_INMQ_L);
he_writel(he_dev, 0x006f, G6_INMQ_S);
he_writel(he_dev, 0x206f, G6_INMQ_L);
he_writel(he_dev, 0x007f, G7_INMQ_S);
he_writel(he_dev, 0x207f, G7_INMQ_L);
} else {
he_writel(he_dev, 0x0000, G0_INMQ_S);
he_writel(he_dev, 0x0008, G0_INMQ_L);
he_writel(he_dev, 0x0001, G1_INMQ_S);
he_writel(he_dev, 0x0009, G1_INMQ_L);
he_writel(he_dev, 0x0002, G2_INMQ_S);
he_writel(he_dev, 0x000a, G2_INMQ_L);
he_writel(he_dev, 0x0003, G3_INMQ_S);
he_writel(he_dev, 0x000b, G3_INMQ_L);
he_writel(he_dev, 0x0004, G4_INMQ_S);
he_writel(he_dev, 0x000c, G4_INMQ_L);
he_writel(he_dev, 0x0005, G5_INMQ_S);
he_writel(he_dev, 0x000d, G5_INMQ_L);
he_writel(he_dev, 0x0006, G6_INMQ_S);
he_writel(he_dev, 0x000e, G6_INMQ_L);
he_writel(he_dev, 0x0007, G7_INMQ_S);
he_writel(he_dev, 0x000f, G7_INMQ_L);
}
/* 5.1.6 application tunable parameters */
he_writel(he_dev, 0x0, MCC);
he_writel(he_dev, 0x0, OEC);
he_writel(he_dev, 0x0, DCC);
he_writel(he_dev, 0x0, CEC);
/* 5.1.7 cs block initialization */
he_init_cs_block(he_dev);
/* 5.1.8 cs block connection memory initialization */
if (he_init_cs_block_rcm(he_dev) < 0)
return -ENOMEM;
/* 5.1.10 initialize host structures */
he_init_tpdrq(he_dev);
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->tpd_pool = dma_pool_create("tpd", &he_dev->pci_dev->dev,
sizeof(struct he_tpd), TPD_ALIGNMENT, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tpd_pool == NULL) {
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
hprintk("unable to create tpd dma_pool\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -ENOMEM;
}
INIT_LIST_HEAD(&he_dev->outstanding_tpds);
if (he_init_group(he_dev, 0) != 0)
return -ENOMEM;
for (group = 1; group < HE_NUM_GROUPS; ++group) {
he_writel(he_dev, 0x0, G0_RBPS_S + (group * 32));
he_writel(he_dev, 0x0, G0_RBPS_T + (group * 32));
he_writel(he_dev, 0x0, G0_RBPS_QI + (group * 32));
he_writel(he_dev, RBP_THRESH(0x1) | RBP_QSIZE(0x0),
G0_RBPS_BS + (group * 32));
he_writel(he_dev, 0x0, G0_RBPL_S + (group * 32));
he_writel(he_dev, 0x0, G0_RBPL_T + (group * 32));
he_writel(he_dev, RBP_THRESH(0x1) | RBP_QSIZE(0x0),
G0_RBPL_QI + (group * 32));
he_writel(he_dev, 0x0, G0_RBPL_BS + (group * 32));
he_writel(he_dev, 0x0, G0_RBRQ_ST + (group * 16));
he_writel(he_dev, 0x0, G0_RBRQ_H + (group * 16));
he_writel(he_dev, RBRQ_THRESH(0x1) | RBRQ_SIZE(0x0),
G0_RBRQ_Q + (group * 16));
he_writel(he_dev, 0x0, G0_RBRQ_I + (group * 16));
he_writel(he_dev, 0x0, G0_TBRQ_B_T + (group * 16));
he_writel(he_dev, 0x0, G0_TBRQ_H + (group * 16));
he_writel(he_dev, TBRQ_THRESH(0x1),
G0_TBRQ_THRESH + (group * 16));
he_writel(he_dev, 0x0, G0_TBRQ_S + (group * 16));
}
/* host status page */
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
he_dev->hsp = dma_zalloc_coherent(&he_dev->pci_dev->dev,
sizeof(struct he_hsp),
&he_dev->hsp_phys, GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->hsp == NULL) {
hprintk("failed to allocate host status page\n");
return -ENOMEM;
}
he_writel(he_dev, he_dev->hsp_phys, HSP_BA);
/* initialize framer */
#ifdef CONFIG_ATM_HE_USE_SUNI
atm: [he] only support suni driver on multimode interfaces Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:17:31 +08:00
if (he_isMM(he_dev))
suni_init(he_dev->atm_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start)
he_dev->atm_dev->phy->start(he_dev->atm_dev);
#endif /* CONFIG_ATM_HE_USE_SUNI */
if (sdh) {
/* this really should be in suni.c but for now... */
int val;
val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM);
val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT);
he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM);
atm: [he] send idle cells instead of unassigned when in SDH mode Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 08:21:27 +08:00
he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* 5.1.12 enable transmit and receive */
reg = he_readl_mbox(he_dev, CS_ERCTL0);
reg |= TX_ENABLE|ER_ENABLE;
he_writel_mbox(he_dev, reg, CS_ERCTL0);
reg = he_readl(he_dev, RC_CONFIG);
reg |= RX_ENABLE;
he_writel(he_dev, reg, RC_CONFIG);
for (i = 0; i < HE_NUM_CS_STPER; ++i) {
he_dev->cs_stper[i].inuse = 0;
he_dev->cs_stper[i].pcr = -1;
}
he_dev->total_bw = 0;
/* atm linux initialization */
he_dev->atm_dev->ci_range.vpi_bits = he_dev->vpibits;
he_dev->atm_dev->ci_range.vci_bits = he_dev->vcibits;
he_dev->irq_peak = 0;
he_dev->rbrq_peak = 0;
he_dev->rbpl_peak = 0;
he_dev->tbrq_peak = 0;
HPRINTK("hell bent for leather!\n");
return 0;
}
static void
he_stop(struct he_dev *he_dev)
{
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
struct he_buff *heb, *next;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct pci_dev *pci_dev;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
u32 gen_cntl_0, reg;
u16 command;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_dev = he_dev->pci_dev;
/* disable interrupts */
if (he_dev->membase) {
pci_read_config_dword(pci_dev, GEN_CNTL_0, &gen_cntl_0);
gen_cntl_0 &= ~(INT_PROC_ENBL | INIT_ENB);
pci_write_config_dword(pci_dev, GEN_CNTL_0, gen_cntl_0);
tasklet_disable(&he_dev->tasklet);
/* disable recv and transmit */
reg = he_readl_mbox(he_dev, CS_ERCTL0);
reg &= ~(TX_ENABLE|ER_ENABLE);
he_writel_mbox(he_dev, reg, CS_ERCTL0);
reg = he_readl(he_dev, RC_CONFIG);
reg &= ~(RX_ENABLE);
he_writel(he_dev, reg, RC_CONFIG);
}
#ifdef CONFIG_ATM_HE_USE_SUNI
if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->stop)
he_dev->atm_dev->phy->stop(he_dev->atm_dev);
#endif /* CONFIG_ATM_HE_USE_SUNI */
if (he_dev->irq)
free_irq(he_dev->irq, he_dev);
if (he_dev->irq_base)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, (CONFIG_IRQ_SIZE + 1)
* sizeof(struct he_irq), he_dev->irq_base, he_dev->irq_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->hsp)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, sizeof(struct he_hsp),
he_dev->hsp, he_dev->hsp_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbpl_base) {
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
list_for_each_entry_safe(heb, next, &he_dev->rbpl_outstanding, entry)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->rbpl_pool, heb, heb->mapping);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_RBPL_SIZE
* sizeof(struct he_rbp), he_dev->rbpl_base, he_dev->rbpl_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
kfree(he_dev->rbpl_virt);
kfree(he_dev->rbpl_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbpl_pool)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_destroy(he_dev->rbpl_pool);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->rbrq_base)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq),
he_dev->rbrq_base, he_dev->rbrq_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tbrq_base)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq),
he_dev->tbrq_base, he_dev->tbrq_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tpdrq_base)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq),
he_dev->tpdrq_base, he_dev->tpdrq_phys);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->tpd_pool)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_destroy(he_dev->tpd_pool);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_dev->pci_dev) {
pci_read_config_word(he_dev->pci_dev, PCI_COMMAND, &command);
command &= ~(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
pci_write_config_word(he_dev->pci_dev, PCI_COMMAND, command);
}
if (he_dev->membase)
iounmap(he_dev->membase);
}
static struct he_tpd *
__alloc_tpd(struct he_dev *he_dev)
{
struct he_tpd *tpd;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
dma_addr_t mapping;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
tpd = dma_pool_alloc(he_dev->tpd_pool, GFP_ATOMIC, &mapping);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tpd == NULL)
return NULL;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
tpd->status = TPD_ADDR(mapping);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tpd->reserved = 0;
tpd->iovec[0].addr = 0; tpd->iovec[0].len = 0;
tpd->iovec[1].addr = 0; tpd->iovec[1].len = 0;
tpd->iovec[2].addr = 0; tpd->iovec[2].len = 0;
return tpd;
}
#define AAL5_LEN(buf,len) \
((((unsigned char *)(buf))[(len)-6] << 8) | \
(((unsigned char *)(buf))[(len)-5]))
/* 2.10.1.2 receive
*
* aal5 packets can optionally return the tcp checksum in the lower
* 16 bits of the crc (RSR0_TCP_CKSUM)
*/
#define TCP_CKSUM(buf,len) \
((((unsigned char *)(buf))[(len)-2] << 8) | \
(((unsigned char *)(buf))[(len-1)]))
static int
he_service_rbrq(struct he_dev *he_dev, int group)
{
struct he_rbrq *rbrq_tail = (struct he_rbrq *)
((unsigned long)he_dev->rbrq_base |
he_dev->hsp->group[group].rbrq_tail);
unsigned cid, lastcid = -1;
struct sk_buff *skb;
struct atm_vcc *vcc = NULL;
struct he_vcc *he_vcc;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
struct he_buff *heb, *next;
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int pdus_assembled = 0;
int updated = 0;
read_lock(&vcc_sklist_lock);
while (he_dev->rbrq_head != rbrq_tail) {
++updated;
HPRINTK("%p rbrq%d 0x%x len=%d cid=0x%x %s%s%s%s%s%s\n",
he_dev->rbrq_head, group,
RBRQ_ADDR(he_dev->rbrq_head),
RBRQ_BUFLEN(he_dev->rbrq_head),
RBRQ_CID(he_dev->rbrq_head),
RBRQ_CRC_ERR(he_dev->rbrq_head) ? " CRC_ERR" : "",
RBRQ_LEN_ERR(he_dev->rbrq_head) ? " LEN_ERR" : "",
RBRQ_END_PDU(he_dev->rbrq_head) ? " END_PDU" : "",
RBRQ_AAL5_PROT(he_dev->rbrq_head) ? " AAL5_PROT" : "",
RBRQ_CON_CLOSED(he_dev->rbrq_head) ? " CON_CLOSED" : "",
RBRQ_HBUF_ERR(he_dev->rbrq_head) ? " HBUF_ERR" : "");
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
i = RBRQ_ADDR(he_dev->rbrq_head) >> RBP_IDX_OFFSET;
heb = he_dev->rbpl_virt[i];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
cid = RBRQ_CID(he_dev->rbrq_head);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (cid != lastcid)
vcc = __find_vcc(he_dev, cid);
lastcid = cid;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
if (vcc == NULL || (he_vcc = HE_VCC(vcc)) == NULL) {
hprintk("vcc/he_vcc == NULL (cid 0x%x)\n", cid);
if (!RBRQ_HBUF_ERR(he_dev->rbrq_head)) {
clear_bit(i, he_dev->rbpl_table);
list_del(&heb->entry);
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->rbpl_pool, heb, heb->mapping);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto next_rbrq_entry;
}
if (RBRQ_HBUF_ERR(he_dev->rbrq_head)) {
hprintk("HBUF_ERR! (cid 0x%x)\n", cid);
atomic_inc(&vcc->stats->rx_drop);
goto return_host_buffers;
}
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
heb->len = RBRQ_BUFLEN(he_dev->rbrq_head) * 4;
clear_bit(i, he_dev->rbpl_table);
list_move_tail(&heb->entry, &he_vcc->buffers);
he_vcc->pdu_len += heb->len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (RBRQ_CON_CLOSED(he_dev->rbrq_head)) {
lastcid = -1;
HPRINTK("wake_up rx_waitq (cid 0x%x)\n", cid);
wake_up(&he_vcc->rx_waitq);
goto return_host_buffers;
}
if (!RBRQ_END_PDU(he_dev->rbrq_head))
goto next_rbrq_entry;
if (RBRQ_LEN_ERR(he_dev->rbrq_head)
|| RBRQ_CRC_ERR(he_dev->rbrq_head)) {
HPRINTK("%s%s (%d.%d)\n",
RBRQ_CRC_ERR(he_dev->rbrq_head)
? "CRC_ERR " : "",
RBRQ_LEN_ERR(he_dev->rbrq_head)
? "LEN_ERR" : "",
vcc->vpi, vcc->vci);
atomic_inc(&vcc->stats->rx_err);
goto return_host_buffers;
}
skb = atm_alloc_charge(vcc, he_vcc->pdu_len + rx_skb_reserve,
GFP_ATOMIC);
if (!skb) {
HPRINTK("charge failed (%d.%d)\n", vcc->vpi, vcc->vci);
goto return_host_buffers;
}
if (rx_skb_reserve > 0)
skb_reserve(skb, rx_skb_reserve);
[NET]: Store skb->timestamp as offset to a base timestamp Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-15 08:24:31 +08:00
__net_timestamp(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
list_for_each_entry(heb, &he_vcc->buffers, entry)
memcpy(skb_put(skb, heb->len), &heb->data, heb->len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (vcc->qos.aal) {
case ATM_AAL0:
/* 2.10.1.5 raw cell receive */
skb->len = ATM_AAL0_SDU;
[SK_BUFF]: Convert skb->tail to sk_buff_data_t So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 11:29:13 +08:00
skb_set_tail_pointer(skb, skb->len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case ATM_AAL5:
/* 2.10.1.2 aal5 receive */
skb->len = AAL5_LEN(skb->data, he_vcc->pdu_len);
[SK_BUFF]: Convert skb->tail to sk_buff_data_t So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 11:29:13 +08:00
skb_set_tail_pointer(skb, skb->len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef USE_CHECKSUM_HW
if (vcc->vpi == 0 && vcc->vci >= ATM_NOT_RSV_VCI) {
[NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose checksum still needs to be completed) and CHECKSUM_COMPLETE (for incoming packets, device supplied full checksum). Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-30 07:44:56 +08:00
skb->ip_summed = CHECKSUM_COMPLETE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
skb->csum = TCP_CKSUM(skb->data,
he_vcc->pdu_len);
}
#endif
break;
}
#ifdef should_never_happen
if (skb->len > vcc->qos.rxtp.max_sdu)
hprintk("pdu_len (%d) > vcc->qos.rxtp.max_sdu (%d)! cid 0x%x\n", skb->len, vcc->qos.rxtp.max_sdu, cid);
#endif
#ifdef notdef
ATM_SKB(skb)->vcc = vcc;
#endif
[ATM]: [he] don't hold the device lock when upcalling This can create a deadlock/lock ordering problem with other layers that want to use the transmit (or other) path of the card at that time. Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-20 03:59:11 +08:00
spin_unlock(&he_dev->global_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
vcc->push(vcc, skb);
[ATM]: [he] don't hold the device lock when upcalling This can create a deadlock/lock ordering problem with other layers that want to use the transmit (or other) path of the card at that time. Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-20 03:59:11 +08:00
spin_lock(&he_dev->global_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
atomic_inc(&vcc->stats->rx);
return_host_buffers:
++pdus_assembled;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
list_for_each_entry_safe(heb, next, &he_vcc->buffers, entry)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->rbpl_pool, heb, heb->mapping);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
INIT_LIST_HEAD(&he_vcc->buffers);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_vcc->pdu_len = 0;
next_rbrq_entry:
he_dev->rbrq_head = (struct he_rbrq *)
((unsigned long) he_dev->rbrq_base |
atm: he: Fix undefined sequence points. GCC complains in these queue index operations because we perform operations of the form: x = some_operation(++x); which is undefined. Replace with: x = some_operation(x + 1); which is well defined and provides the intended operation. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 15:07:55 +08:00
RBRQ_MASK(he_dev->rbrq_head + 1));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
read_unlock(&vcc_sklist_lock);
if (updated) {
if (updated > he_dev->rbrq_peak)
he_dev->rbrq_peak = updated;
he_writel(he_dev, RBRQ_MASK(he_dev->rbrq_head),
G0_RBRQ_H + (group * 16));
}
return pdus_assembled;
}
static void
he_service_tbrq(struct he_dev *he_dev, int group)
{
struct he_tbrq *tbrq_tail = (struct he_tbrq *)
((unsigned long)he_dev->tbrq_base |
he_dev->hsp->group[group].tbrq_tail);
struct he_tpd *tpd;
int slot, updated = 0;
struct he_tpd *__tpd;
/* 2.1.6 transmit buffer return queue */
while (he_dev->tbrq_head != tbrq_tail) {
++updated;
HPRINTK("tbrq%d 0x%x%s%s\n",
group,
TBRQ_TPD(he_dev->tbrq_head),
TBRQ_EOS(he_dev->tbrq_head) ? " EOS" : "",
TBRQ_MULTIPLE(he_dev->tbrq_head) ? " MULTIPLE" : "");
tpd = NULL;
list_for_each_entry(__tpd, &he_dev->outstanding_tpds, entry) {
if (TPD_ADDR(__tpd->status) == TBRQ_TPD(he_dev->tbrq_head)) {
tpd = __tpd;
list_del(&__tpd->entry);
break;
}
}
if (tpd == NULL) {
hprintk("unable to locate tpd for dma buffer %x\n",
TBRQ_TPD(he_dev->tbrq_head));
goto next_tbrq_entry;
}
if (TBRQ_EOS(he_dev->tbrq_head)) {
HPRINTK("wake_up(tx_waitq) cid 0x%x\n",
he_mkcid(he_dev, tpd->vcc->vpi, tpd->vcc->vci));
if (tpd->vcc)
wake_up(&HE_VCC(tpd->vcc)->tx_waitq);
goto next_tbrq_entry;
}
for (slot = 0; slot < TPD_MAXIOV; ++slot) {
if (tpd->iovec[slot].addr)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&he_dev->pci_dev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tpd->iovec[slot].addr,
tpd->iovec[slot].len & TPD_LEN_MASK,
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tpd->iovec[slot].len & TPD_LST)
break;
}
if (tpd->skb) { /* && !TBRQ_MULTIPLE(he_dev->tbrq_head) */
if (tpd->vcc && tpd->vcc->pop)
tpd->vcc->pop(tpd->vcc, tpd->skb);
else
dev_kfree_skb_any(tpd->skb);
}
next_tbrq_entry:
if (tpd)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->tpd_pool, tpd, TPD_ADDR(tpd->status));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_dev->tbrq_head = (struct he_tbrq *)
((unsigned long) he_dev->tbrq_base |
atm: he: Fix undefined sequence points. GCC complains in these queue index operations because we perform operations of the form: x = some_operation(++x); which is undefined. Replace with: x = some_operation(x + 1); which is well defined and provides the intended operation. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-17 15:07:55 +08:00
TBRQ_MASK(he_dev->tbrq_head + 1));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (updated) {
if (updated > he_dev->tbrq_peak)
he_dev->tbrq_peak = updated;
he_writel(he_dev, TBRQ_MASK(he_dev->tbrq_head),
G0_TBRQ_H + (group * 16));
}
}
static void
he_service_rbpl(struct he_dev *he_dev, int group)
{
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
struct he_rbp *new_tail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct he_rbp *rbpl_head;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
struct he_buff *heb;
dma_addr_t mapping;
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int moved = 0;
rbpl_head = (struct he_rbp *) ((unsigned long)he_dev->rbpl_base |
RBPL_MASK(he_readl(he_dev, G0_RBPL_S)));
for (;;) {
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
new_tail = (struct he_rbp *) ((unsigned long)he_dev->rbpl_base |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
RBPL_MASK(he_dev->rbpl_tail+1));
/* table 3.42 -- rbpl_tail should never be set to rbpl_head */
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
if (new_tail == rbpl_head)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
i = find_next_zero_bit(he_dev->rbpl_table, RBPL_TABLE_SIZE, he_dev->rbpl_hint);
if (i > (RBPL_TABLE_SIZE - 1)) {
i = find_first_zero_bit(he_dev->rbpl_table, RBPL_TABLE_SIZE);
if (i > (RBPL_TABLE_SIZE - 1))
break;
}
he_dev->rbpl_hint = i + 1;
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
heb = dma_pool_alloc(he_dev->rbpl_pool, GFP_ATOMIC, &mapping);
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
if (!heb)
break;
heb->mapping = mapping;
list_add(&heb->entry, &he_dev->rbpl_outstanding);
he_dev->rbpl_virt[i] = heb;
set_bit(i, he_dev->rbpl_table);
new_tail->idx = i << RBP_IDX_OFFSET;
new_tail->phys = mapping + offsetof(struct he_buff, data);
he_dev->rbpl_tail = new_tail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
++moved;
}
if (moved)
he_writel(he_dev, RBPL_MASK(he_dev->rbpl_tail), G0_RBPL_T);
}
static void
he_tasklet(unsigned long data)
{
unsigned long flags;
struct he_dev *he_dev = (struct he_dev *) data;
int group, type;
int updated = 0;
HPRINTK("tasklet (0x%lx)\n", data);
spin_lock_irqsave(&he_dev->global_lock, flags);
while (he_dev->irq_head != he_dev->irq_tail) {
++updated;
type = ITYPE_TYPE(he_dev->irq_head->isw);
group = ITYPE_GROUP(he_dev->irq_head->isw);
switch (type) {
case ITYPE_RBRQ_THRESH:
HPRINTK("rbrq%d threshold\n", group);
/* fall through */
case ITYPE_RBRQ_TIMER:
atm: [he] remove small buffer allocation/handling code Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:04:59 +08:00
if (he_service_rbrq(he_dev, group))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_service_rbpl(he_dev, group);
break;
case ITYPE_TBRQ_THRESH:
HPRINTK("tbrq%d threshold\n", group);
/* fall through */
case ITYPE_TPD_COMPLETE:
he_service_tbrq(he_dev, group);
break;
case ITYPE_RBPL_THRESH:
he_service_rbpl(he_dev, group);
break;
case ITYPE_RBPS_THRESH:
atm: [he] remove small buffer allocation/handling code Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:04:59 +08:00
/* shouldn't happen unless small buffers enabled */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case ITYPE_PHY:
HPRINTK("phy interrupt\n");
#ifdef CONFIG_ATM_HE_USE_SUNI
spin_unlock_irqrestore(&he_dev->global_lock, flags);
if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->interrupt)
he_dev->atm_dev->phy->interrupt(he_dev->atm_dev);
spin_lock_irqsave(&he_dev->global_lock, flags);
#endif
break;
case ITYPE_OTHER:
switch (type|group) {
case ITYPE_PARITY:
hprintk("parity error\n");
break;
case ITYPE_ABORT:
hprintk("abort 0x%x\n", he_readl(he_dev, ABORT_ADDR));
break;
}
break;
case ITYPE_TYPE(ITYPE_INVALID):
/* see 8.1.1 -- check all queues */
HPRINTK("isw not updated 0x%x\n", he_dev->irq_head->isw);
he_service_rbrq(he_dev, 0);
he_service_rbpl(he_dev, 0);
he_service_tbrq(he_dev, 0);
break;
default:
hprintk("bad isw 0x%x?\n", he_dev->irq_head->isw);
}
he_dev->irq_head->isw = ITYPE_INVALID;
he_dev->irq_head = (struct he_irq *) NEXT_ENTRY(he_dev->irq_base, he_dev->irq_head, IRQ_MASK);
}
if (updated) {
if (updated > he_dev->irq_peak)
he_dev->irq_peak = updated;
he_writel(he_dev,
IRQ_SIZE(CONFIG_IRQ_SIZE) |
IRQ_THRESH(CONFIG_IRQ_THRESH) |
IRQ_TAIL(he_dev->irq_tail), IRQ0_HEAD);
(void) he_readl(he_dev, INT_FIFO); /* 8.1.2 controller errata; flush posted writes */
}
spin_unlock_irqrestore(&he_dev->global_lock, flags);
}
static irqreturn_t
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
he_irq_handler(int irq, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
unsigned long flags;
struct he_dev *he_dev = (struct he_dev * )dev_id;
int handled = 0;
if (he_dev == NULL)
return IRQ_NONE;
spin_lock_irqsave(&he_dev->global_lock, flags);
he_dev->irq_tail = (struct he_irq *) (((unsigned long)he_dev->irq_base) |
(*he_dev->irq_tailoffset << 2));
if (he_dev->irq_tail == he_dev->irq_head) {
HPRINTK("tailoffset not updated?\n");
he_dev->irq_tail = (struct he_irq *) ((unsigned long)he_dev->irq_base |
((he_readl(he_dev, IRQ0_BASE) & IRQ_MASK) << 2));
(void) he_readl(he_dev, INT_FIFO); /* 8.1.2 controller errata */
}
#ifdef DEBUG
if (he_dev->irq_head == he_dev->irq_tail /* && !IRQ_PENDING */)
hprintk("spurious (or shared) interrupt?\n");
#endif
if (he_dev->irq_head != he_dev->irq_tail) {
handled = 1;
tasklet_schedule(&he_dev->tasklet);
he_writel(he_dev, INT_CLEAR_A, INT_FIFO); /* clear interrupt */
(void) he_readl(he_dev, INT_FIFO); /* flush posted writes */
}
spin_unlock_irqrestore(&he_dev->global_lock, flags);
return IRQ_RETVAL(handled);
}
static __inline__ void
__enqueue_tpd(struct he_dev *he_dev, struct he_tpd *tpd, unsigned cid)
{
struct he_tpdrq *new_tail;
HPRINTK("tpdrq %p cid 0x%x -> tpdrq_tail %p\n",
tpd, cid, he_dev->tpdrq_tail);
/* new_tail = he_dev->tpdrq_tail; */
new_tail = (struct he_tpdrq *) ((unsigned long) he_dev->tpdrq_base |
TPDRQ_MASK(he_dev->tpdrq_tail+1));
/*
* check to see if we are about to set the tail == head
* if true, update the head pointer from the adapter
* to see if this is really the case (reading the queue
* head for every enqueue would be unnecessarily slow)
*/
if (new_tail == he_dev->tpdrq_head) {
he_dev->tpdrq_head = (struct he_tpdrq *)
(((unsigned long)he_dev->tpdrq_base) |
TPDRQ_MASK(he_readl(he_dev, TPDRQ_B_H)));
if (new_tail == he_dev->tpdrq_head) {
[ATM]: [he] when transmit fails, unmap the dma regions Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-14 11:33:40 +08:00
int slot;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hprintk("tpdrq full (cid 0x%x)\n", cid);
/*
* FIXME
* push tpd onto a transmit backlog queue
* after service_tbrq, service the backlog
* for now, we just drop the pdu
*/
[ATM]: [he] when transmit fails, unmap the dma regions Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-14 11:33:40 +08:00
for (slot = 0; slot < TPD_MAXIOV; ++slot) {
if (tpd->iovec[slot].addr)
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_unmap_single(&he_dev->pci_dev->dev,
[ATM]: [he] when transmit fails, unmap the dma regions Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-14 11:33:40 +08:00
tpd->iovec[slot].addr,
tpd->iovec[slot].len & TPD_LEN_MASK,
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
DMA_TO_DEVICE);
[ATM]: [he] when transmit fails, unmap the dma regions Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-14 11:33:40 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tpd->skb) {
if (tpd->vcc->pop)
tpd->vcc->pop(tpd->vcc, tpd->skb);
else
dev_kfree_skb_any(tpd->skb);
atomic_inc(&tpd->vcc->stats->tx_err);
}
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
dma_pool_free(he_dev->tpd_pool, tpd, TPD_ADDR(tpd->status));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
}
}
/* 2.1.5 transmit packet descriptor ready queue */
list_add_tail(&tpd->entry, &he_dev->outstanding_tpds);
he_dev->tpdrq_tail->tpd = TPD_ADDR(tpd->status);
he_dev->tpdrq_tail->cid = cid;
wmb();
he_dev->tpdrq_tail = new_tail;
he_writel(he_dev, TPDRQ_MASK(he_dev->tpdrq_tail), TPDRQ_T);
(void) he_readl(he_dev, TPDRQ_T); /* flush posted writes */
}
static int
he_open(struct atm_vcc *vcc)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(vcc->dev);
struct he_vcc *he_vcc;
int err = 0;
unsigned cid, rsr0, rsr1, rsr4, tsr0, tsr0_aal, tsr4, period, reg, clock;
short vpi = vcc->vpi;
int vci = vcc->vci;
if (vci == ATM_VCI_UNSPEC || vpi == ATM_VPI_UNSPEC)
return 0;
HPRINTK("open vcc %p %d.%d\n", vcc, vpi, vci);
set_bit(ATM_VF_ADDR, &vcc->flags);
cid = he_mkcid(he_dev, vpi, vci);
[PATCH] getting rid of all casts of k[cmz]alloc() calls Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 16:35:56 +08:00
he_vcc = kmalloc(sizeof(struct he_vcc), GFP_ATOMIC);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (he_vcc == NULL) {
hprintk("unable to allocate he_vcc during open\n");
return -ENOMEM;
}
atm: [he] rewrite buffer handling in receive path Instead of a fixed list of buffers, use the buffer pool correctly and keep track of the outstanding buffer indexes using a fixed table. Resolves reported HBUF_ERR's -- failures due to lack of receive buffers. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:05:33 +08:00
INIT_LIST_HEAD(&he_vcc->buffers);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_vcc->pdu_len = 0;
he_vcc->rc_index = -1;
init_waitqueue_head(&he_vcc->rx_waitq);
init_waitqueue_head(&he_vcc->tx_waitq);
vcc->dev_data = he_vcc;
if (vcc->qos.txtp.traffic_class != ATM_NONE) {
int pcr_goal;
pcr_goal = atm_pcr_goal(&vcc->qos.txtp);
if (pcr_goal == 0)
pcr_goal = he_dev->atm_dev->link_rate;
if (pcr_goal < 0) /* means round down, technically */
pcr_goal = -pcr_goal;
HPRINTK("open tx cid 0x%x pcr_goal %d\n", cid, pcr_goal);
switch (vcc->qos.aal) {
case ATM_AAL5:
tsr0_aal = TSR0_AAL5;
tsr4 = TSR4_AAL5;
break;
case ATM_AAL0:
tsr0_aal = TSR0_AAL0_SDU;
tsr4 = TSR4_AAL0_SDU;
break;
default:
err = -EINVAL;
goto open_failed;
}
spin_lock_irqsave(&he_dev->global_lock, flags);
tsr0 = he_readl_tsr0(he_dev, cid);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
if (TSR0_CONN_STATE(tsr0) != 0) {
hprintk("cid 0x%x not idle (tsr0 = 0x%x)\n", cid, tsr0);
err = -EBUSY;
goto open_failed;
}
switch (vcc->qos.txtp.traffic_class) {
case ATM_UBR:
/* 2.3.3.1 open connection ubr */
tsr0 = TSR0_UBR | TSR0_GROUP(0) | tsr0_aal |
TSR0_USE_WMIN | TSR0_UPDATE_GER;
break;
case ATM_CBR:
/* 2.3.3.2 open connection cbr */
/* 8.2.3 cbr scheduler wrap problem -- limit to 90% total link rate */
if ((he_dev->total_bw + pcr_goal)
> (he_dev->atm_dev->link_rate * 9 / 10))
{
err = -EBUSY;
goto open_failed;
}
spin_lock_irqsave(&he_dev->global_lock, flags); /* also protects he_dev->cs_stper[] */
/* find an unused cs_stper register */
for (reg = 0; reg < HE_NUM_CS_STPER; ++reg)
if (he_dev->cs_stper[reg].inuse == 0 ||
he_dev->cs_stper[reg].pcr == pcr_goal)
break;
if (reg == HE_NUM_CS_STPER) {
err = -EBUSY;
spin_unlock_irqrestore(&he_dev->global_lock, flags);
goto open_failed;
}
he_dev->total_bw += pcr_goal;
he_vcc->rc_index = reg;
++he_dev->cs_stper[reg].inuse;
he_dev->cs_stper[reg].pcr = pcr_goal;
clock = he_is622(he_dev) ? 66667000 : 50000000;
period = clock / pcr_goal;
HPRINTK("rc_index = %d period = %d\n",
reg, period);
he_writel_mbox(he_dev, rate_to_atmf(period/2),
CS_STPER0 + reg);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
tsr0 = TSR0_CBR | TSR0_GROUP(0) | tsr0_aal |
TSR0_RC_INDEX(reg);
break;
default:
err = -EINVAL;
goto open_failed;
}
spin_lock_irqsave(&he_dev->global_lock, flags);
he_writel_tsr0(he_dev, tsr0, cid);
he_writel_tsr4(he_dev, tsr4 | 1, cid);
he_writel_tsr1(he_dev, TSR1_MCR(rate_to_atmf(0)) |
TSR1_PCR(rate_to_atmf(pcr_goal)), cid);
he_writel_tsr2(he_dev, TSR2_ACR(rate_to_atmf(pcr_goal)), cid);
he_writel_tsr9(he_dev, TSR9_OPEN_CONN, cid);
he_writel_tsr3(he_dev, 0x0, cid);
he_writel_tsr5(he_dev, 0x0, cid);
he_writel_tsr6(he_dev, 0x0, cid);
he_writel_tsr7(he_dev, 0x0, cid);
he_writel_tsr8(he_dev, 0x0, cid);
he_writel_tsr10(he_dev, 0x0, cid);
he_writel_tsr11(he_dev, 0x0, cid);
he_writel_tsr12(he_dev, 0x0, cid);
he_writel_tsr13(he_dev, 0x0, cid);
he_writel_tsr14(he_dev, 0x0, cid);
(void) he_readl_tsr0(he_dev, cid); /* flush posted writes */
spin_unlock_irqrestore(&he_dev->global_lock, flags);
}
if (vcc->qos.rxtp.traffic_class != ATM_NONE) {
unsigned aal;
HPRINTK("open rx cid 0x%x (rx_waitq %p)\n", cid,
&HE_VCC(vcc)->rx_waitq);
switch (vcc->qos.aal) {
case ATM_AAL5:
aal = RSR0_AAL5;
break;
case ATM_AAL0:
aal = RSR0_RAWCELL;
break;
default:
err = -EINVAL;
goto open_failed;
}
spin_lock_irqsave(&he_dev->global_lock, flags);
rsr0 = he_readl_rsr0(he_dev, cid);
if (rsr0 & RSR0_OPEN_CONN) {
spin_unlock_irqrestore(&he_dev->global_lock, flags);
hprintk("cid 0x%x not idle (rsr0 = 0x%x)\n", cid, rsr0);
err = -EBUSY;
goto open_failed;
}
atm: [he] remove small buffer allocation/handling code Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-29 17:04:59 +08:00
rsr1 = RSR1_GROUP(0) | RSR1_RBPL_ONLY;
rsr4 = RSR4_GROUP(0) | RSR4_RBPL_ONLY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rsr0 = vcc->qos.rxtp.traffic_class == ATM_UBR ?
(RSR0_EPD_ENABLE|RSR0_PPD_ENABLE) : 0;
#ifdef USE_CHECKSUM_HW
if (vpi == 0 && vci >= ATM_NOT_RSV_VCI)
rsr0 |= RSR0_TCP_CKSUM;
#endif
he_writel_rsr4(he_dev, rsr4, cid);
he_writel_rsr1(he_dev, rsr1, cid);
/* 5.1.11 last parameter initialized should be
the open/closed indication in rsr0 */
he_writel_rsr0(he_dev,
rsr0 | RSR0_START_PDU | RSR0_OPEN_CONN | aal, cid);
(void) he_readl_rsr0(he_dev, cid); /* flush posted writes */
spin_unlock_irqrestore(&he_dev->global_lock, flags);
}
open_failed:
if (err) {
[ATM]: [drivers] kill pointless NULL checks and casts before kfree() Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-03 04:04:07 +08:00
kfree(he_vcc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
else
set_bit(ATM_VF_READY, &vcc->flags);
return err;
}
static void
he_close(struct atm_vcc *vcc)
{
unsigned long flags;
DECLARE_WAITQUEUE(wait, current);
struct he_dev *he_dev = HE_DEV(vcc->dev);
struct he_tpd *tpd;
unsigned cid;
struct he_vcc *he_vcc = HE_VCC(vcc);
#define MAX_RETRY 30
int retry = 0, sleep = 1, tx_inuse;
HPRINTK("close vcc %p %d.%d\n", vcc, vcc->vpi, vcc->vci);
clear_bit(ATM_VF_READY, &vcc->flags);
cid = he_mkcid(he_dev, vcc->vpi, vcc->vci);
if (vcc->qos.rxtp.traffic_class != ATM_NONE) {
int timeout;
HPRINTK("close rx cid 0x%x\n", cid);
/* 2.7.2.2 close receive operation */
/* wait for previous close (if any) to finish */
spin_lock_irqsave(&he_dev->global_lock, flags);
while (he_readl(he_dev, RCC_STAT) & RCC_BUSY) {
HPRINTK("close cid 0x%x RCC_BUSY\n", cid);
udelay(250);
}
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&he_vcc->rx_waitq, &wait);
he_writel_rsr0(he_dev, RSR0_CLOSE_CONN, cid);
(void) he_readl_rsr0(he_dev, cid); /* flush posted writes */
he_writel_mbox(he_dev, cid, RXCON_CLOSE);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
timeout = schedule_timeout(30*HZ);
remove_wait_queue(&he_vcc->rx_waitq, &wait);
set_current_state(TASK_RUNNING);
if (timeout == 0)
hprintk("close rx timeout cid 0x%x\n", cid);
HPRINTK("close rx cid 0x%x complete\n", cid);
}
if (vcc->qos.txtp.traffic_class != ATM_NONE) {
volatile unsigned tsr4, tsr0;
int timeout;
HPRINTK("close tx cid 0x%x\n", cid);
/* 2.1.2
*
* ... the host must first stop queueing packets to the TPDRQ
* on the connection to be closed, then wait for all outstanding
* packets to be transmitted and their buffers returned to the
* TBRQ. When the last packet on the connection arrives in the
* TBRQ, the host issues the close command to the adapter.
*/
atm: [he] adjust tests to account for sk_wmem_alloc changes due to reference counting sk_wmem_alloc now has a value of 1 when all the outstanding data has been sent. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-04 13:22:17 +08:00
while (((tx_inuse = atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) > 1) &&
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(retry < MAX_RETRY)) {
msleep(sleep);
if (sleep < 250)
sleep = sleep * 2;
++retry;
}
atm: [he] adjust tests to account for sk_wmem_alloc changes due to reference counting sk_wmem_alloc now has a value of 1 when all the outstanding data has been sent. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-04 13:22:17 +08:00
if (tx_inuse > 1)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hprintk("close tx cid 0x%x tx_inuse = %d\n", cid, tx_inuse);
/* 2.3.1.1 generic close operations with flush */
spin_lock_irqsave(&he_dev->global_lock, flags);
he_writel_tsr4_upper(he_dev, TSR4_FLUSH_CONN, cid);
/* also clears TSR4_SESSION_ENDED */
switch (vcc->qos.txtp.traffic_class) {
case ATM_UBR:
he_writel_tsr1(he_dev,
TSR1_MCR(rate_to_atmf(200000))
| TSR1_PCR(0), cid);
break;
case ATM_CBR:
he_writel_tsr14_upper(he_dev, TSR14_DELETE, cid);
break;
}
(void) he_readl_tsr4(he_dev, cid); /* flush posted writes */
tpd = __alloc_tpd(he_dev);
if (tpd == NULL) {
hprintk("close tx he_alloc_tpd failed cid 0x%x\n", cid);
goto close_tx_incomplete;
}
tpd->status |= TPD_EOS | TPD_INT;
tpd->skb = NULL;
tpd->vcc = vcc;
wmb();
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&he_vcc->tx_waitq, &wait);
__enqueue_tpd(he_dev, tpd, cid);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
timeout = schedule_timeout(30*HZ);
remove_wait_queue(&he_vcc->tx_waitq, &wait);
set_current_state(TASK_RUNNING);
spin_lock_irqsave(&he_dev->global_lock, flags);
if (timeout == 0) {
hprintk("close tx timeout cid 0x%x\n", cid);
goto close_tx_incomplete;
}
while (!((tsr4 = he_readl_tsr4(he_dev, cid)) & TSR4_SESSION_ENDED)) {
HPRINTK("close tx cid 0x%x !TSR4_SESSION_ENDED (tsr4 = 0x%x)\n", cid, tsr4);
udelay(250);
}
while (TSR0_CONN_STATE(tsr0 = he_readl_tsr0(he_dev, cid)) != 0) {
HPRINTK("close tx cid 0x%x TSR0_CONN_STATE != 0 (tsr0 = 0x%x)\n", cid, tsr0);
udelay(250);
}
close_tx_incomplete:
if (vcc->qos.txtp.traffic_class == ATM_CBR) {
int reg = he_vcc->rc_index;
HPRINTK("cs_stper reg = %d\n", reg);
if (he_dev->cs_stper[reg].inuse == 0)
hprintk("cs_stper[%d].inuse = 0!\n", reg);
else
--he_dev->cs_stper[reg].inuse;
he_dev->total_bw -= he_dev->cs_stper[reg].pcr;
}
spin_unlock_irqrestore(&he_dev->global_lock, flags);
HPRINTK("close tx cid 0x%x complete\n", cid);
}
kfree(he_vcc);
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
static int
he_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(vcc->dev);
unsigned cid = he_mkcid(he_dev, vcc->vpi, vcc->vci);
struct he_tpd *tpd;
#ifdef USE_SCATTERGATHER
int i, slot = 0;
#endif
#define HE_TPD_BUFSIZE 0xffff
HPRINTK("send %d.%d\n", vcc->vpi, vcc->vci);
if ((skb->len > HE_TPD_BUFSIZE) ||
((vcc->qos.aal == ATM_AAL0) && (skb->len != ATM_AAL0_SDU))) {
hprintk("buffer too large (or small) -- %d bytes\n", skb->len );
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
atomic_inc(&vcc->stats->tx_err);
return -EINVAL;
}
#ifndef USE_SCATTERGATHER
if (skb_shinfo(skb)->nr_frags) {
hprintk("no scatter/gather support\n");
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
atomic_inc(&vcc->stats->tx_err);
return -EINVAL;
}
#endif
spin_lock_irqsave(&he_dev->global_lock, flags);
tpd = __alloc_tpd(he_dev);
if (tpd == NULL) {
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
atomic_inc(&vcc->stats->tx_err);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
return -ENOMEM;
}
if (vcc->qos.aal == ATM_AAL5)
tpd->status |= TPD_CELLTYPE(TPD_USERCELL);
else {
char *pti_clp = (void *) (skb->data + 3);
int clp, pti;
pti = (*pti_clp & ATM_HDR_PTI_MASK) >> ATM_HDR_PTI_SHIFT;
clp = (*pti_clp & ATM_HDR_CLP);
tpd->status |= TPD_CELLTYPE(pti);
if (clp)
tpd->status |= TPD_CLP;
skb_pull(skb, ATM_AAL0_SDU - ATM_CELL_PAYLOAD);
}
#ifdef USE_SCATTERGATHER
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
tpd->iovec[slot].addr = dma_map_single(&he_dev->pci_dev->dev, skb->data,
skb_headlen(skb), DMA_TO_DEVICE);
drivers: net: use skb_headlen() replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15 06:59:40 +08:00
tpd->iovec[slot].len = skb_headlen(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
++slot;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
if (slot == TPD_MAXIOV) { /* queue tpd; start new tpd */
tpd->vcc = vcc;
tpd->skb = NULL; /* not the last fragment
so dont ->push() yet */
wmb();
__enqueue_tpd(he_dev, tpd, cid);
tpd = __alloc_tpd(he_dev);
if (tpd == NULL) {
if (vcc->pop)
vcc->pop(vcc, skb);
else
dev_kfree_skb_any(skb);
atomic_inc(&vcc->stats->tx_err);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
return -ENOMEM;
}
tpd->status |= TPD_USERCELL;
slot = 0;
}
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
tpd->iovec[slot].addr = dma_map_single(&he_dev->pci_dev->dev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(void *) page_address(frag->page) + frag->page_offset,
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
frag->size, DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tpd->iovec[slot].len = frag->size;
++slot;
}
tpd->iovec[slot - 1].len |= TPD_LST;
#else
atm: remove deprecated use of pci api Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:57:21 +08:00
tpd->address0 = dma_map_single(&he_dev->pci_dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tpd->length0 = skb->len | TPD_LST;
#endif
tpd->status |= TPD_INT;
tpd->vcc = vcc;
tpd->skb = skb;
wmb();
ATM_SKB(skb)->vcc = vcc;
__enqueue_tpd(he_dev, tpd, cid);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
atomic_inc(&vcc->stats->tx);
return 0;
}
static int
he_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user *arg)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(atm_dev);
struct he_ioctl_reg reg;
int err = 0;
switch (cmd) {
case HE_GET_REG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&reg, arg,
sizeof(struct he_ioctl_reg)))
return -EFAULT;
atm: [he] limit queries to the device's register space From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2008-06-17 08:20:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(&he_dev->global_lock, flags);
switch (reg.type) {
case HE_REGTYPE_PCI:
atm: Cleanup redundant tests on unsigned The variables are unsigned so the `< 0' test always fails, the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-23 14:09:55 +08:00
if (reg.addr >= HE_REGMAP_SIZE) {
atm: [he] limit queries to the device's register space From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2008-06-17 08:20:52 +08:00
err = -EINVAL;
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
reg.val = he_readl(he_dev, reg.addr);
break;
case HE_REGTYPE_RCM:
reg.val =
he_readl_rcm(he_dev, reg.addr);
break;
case HE_REGTYPE_TCM:
reg.val =
he_readl_tcm(he_dev, reg.addr);
break;
case HE_REGTYPE_MBOX:
reg.val =
he_readl_mbox(he_dev, reg.addr);
break;
default:
err = -EINVAL;
break;
}
spin_unlock_irqrestore(&he_dev->global_lock, flags);
if (err == 0)
if (copy_to_user(arg, &reg,
sizeof(struct he_ioctl_reg)))
return -EFAULT;
break;
default:
#ifdef CONFIG_ATM_HE_USE_SUNI
if (atm_dev->phy && atm_dev->phy->ioctl)
err = atm_dev->phy->ioctl(atm_dev, cmd, arg);
#else /* CONFIG_ATM_HE_USE_SUNI */
err = -EINVAL;
#endif /* CONFIG_ATM_HE_USE_SUNI */
break;
}
return err;
}
static void
he_phy_put(struct atm_dev *atm_dev, unsigned char val, unsigned long addr)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(atm_dev);
HPRINTK("phy_put(val 0x%x, addr 0x%lx)\n", val, addr);
spin_lock_irqsave(&he_dev->global_lock, flags);
he_writel(he_dev, val, FRAMER + (addr*4));
(void) he_readl(he_dev, FRAMER + (addr*4)); /* flush posted writes */
spin_unlock_irqrestore(&he_dev->global_lock, flags);
}
static unsigned char
he_phy_get(struct atm_dev *atm_dev, unsigned long addr)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(atm_dev);
unsigned reg;
spin_lock_irqsave(&he_dev->global_lock, flags);
reg = he_readl(he_dev, FRAMER + (addr*4));
spin_unlock_irqrestore(&he_dev->global_lock, flags);
HPRINTK("phy_get(addr 0x%lx) =0x%x\n", addr, reg);
return reg;
}
static int
he_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
{
unsigned long flags;
struct he_dev *he_dev = HE_DEV(dev);
int left, i;
#ifdef notdef
struct he_rbrq *rbrq_tail;
struct he_tpdrq *tpdrq_head;
int rbpl_head, rbpl_tail;
#endif
static long mcc = 0, oec = 0, dcc = 0, cec = 0;
left = *pos;
if (!left--)
[ATM]: [he] This patch removes the ancient version string. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-31 15:16:45 +08:00
return sprintf(page, "ATM he driver\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!left--)
return sprintf(page, "%s%s\n\n",
he_dev->prod_id, he_dev->media & 0x40 ? "SM" : "MM");
if (!left--)
return sprintf(page, "Mismatched Cells VPI/VCI Not Open Dropped Cells RCM Dropped Cells\n");
spin_lock_irqsave(&he_dev->global_lock, flags);
mcc += he_readl(he_dev, MCC);
oec += he_readl(he_dev, OEC);
dcc += he_readl(he_dev, DCC);
cec += he_readl(he_dev, CEC);
spin_unlock_irqrestore(&he_dev->global_lock, flags);
if (!left--)
return sprintf(page, "%16ld %16ld %13ld %17ld\n\n",
mcc, oec, dcc, cec);
if (!left--)
return sprintf(page, "irq_size = %d inuse = ? peak = %d\n",
CONFIG_IRQ_SIZE, he_dev->irq_peak);
if (!left--)
return sprintf(page, "tpdrq_size = %d inuse = ?\n",
CONFIG_TPDRQ_SIZE);
if (!left--)
return sprintf(page, "rbrq_size = %d inuse = ? peak = %d\n",
CONFIG_RBRQ_SIZE, he_dev->rbrq_peak);
if (!left--)
return sprintf(page, "tbrq_size = %d peak = %d\n",
CONFIG_TBRQ_SIZE, he_dev->tbrq_peak);
#ifdef notdef
rbpl_head = RBPL_MASK(he_readl(he_dev, G0_RBPL_S));
rbpl_tail = RBPL_MASK(he_readl(he_dev, G0_RBPL_T));
inuse = rbpl_head - rbpl_tail;
if (inuse < 0)
inuse += CONFIG_RBPL_SIZE * sizeof(struct he_rbp);
inuse /= sizeof(struct he_rbp);
if (!left--)
return sprintf(page, "rbpl_size = %d inuse = %d\n\n",
CONFIG_RBPL_SIZE, inuse);
#endif
if (!left--)
return sprintf(page, "rate controller periods (cbr)\n pcr #vc\n");
for (i = 0; i < HE_NUM_CS_STPER; ++i)
if (!left--)
return sprintf(page, "cs_stper%-2d %8ld %3d\n", i,
he_dev->cs_stper[i].pcr,
he_dev->cs_stper[i].inuse);
if (!left--)
return sprintf(page, "total bw (cbr): %d (limit %d)\n",
he_dev->total_bw, he_dev->atm_dev->link_rate * 10 / 9);
return 0;
}
/* eeprom routines -- see 4.7 */
[ATM]: Make atm/he.c:read_prom_byte() static This patch makes the needlessly global read_prom_byte() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-01 10:34:44 +08:00
static u8 read_prom_byte(struct he_dev *he_dev, int addr)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 val = 0, tmp_read = 0;
int i, j = 0;
u8 byte_read = 0;
val = readl(he_dev->membase + HOST_CNTL);
val &= 0xFFFFE0FF;
/* Turn on write enable */
val |= 0x800;
he_writel(he_dev, val, HOST_CNTL);
/* Send READ instruction */
atm: Use ARRAY_SIZE macro when appropriate Use ARRAY_SIZE macro already defined in kernel.h for ATM drivers. Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: chas williams <chas@cmf.nrl.navy.mil> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-16 17:42:23 +08:00
for (i = 0; i < ARRAY_SIZE(readtab); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
he_writel(he_dev, val | readtab[i], HOST_CNTL);
udelay(EEPROM_DELAY);
}
/* Next, we need to send the byte address to read from */
for (i = 7; i >= 0; i--) {
he_writel(he_dev, val | clocktab[j++] | (((addr >> i) & 1) << 9), HOST_CNTL);
udelay(EEPROM_DELAY);
he_writel(he_dev, val | clocktab[j++] | (((addr >> i) & 1) << 9), HOST_CNTL);
udelay(EEPROM_DELAY);
}
j = 0;
val &= 0xFFFFF7FF; /* Turn off write enable */
he_writel(he_dev, val, HOST_CNTL);
/* Now, we can read data from the EEPROM by clocking it in */
for (i = 7; i >= 0; i--) {
he_writel(he_dev, val | clocktab[j++], HOST_CNTL);
udelay(EEPROM_DELAY);
tmp_read = he_readl(he_dev, HOST_CNTL);
byte_read |= (unsigned char)
((tmp_read & ID_DOUT) >> ID_DOFFSET << i);
he_writel(he_dev, val | clocktab[j++], HOST_CNTL);
udelay(EEPROM_DELAY);
}
he_writel(he_dev, val | ID_CS, HOST_CNTL);
udelay(EEPROM_DELAY);
return byte_read;
}
MODULE_LICENSE("GPL");
MODULE_AUTHOR("chas williams <chas@cmf.nrl.navy.mil>");
MODULE_DESCRIPTION("ForeRunnerHE ATM Adapter driver");
module_param(disable64, bool, 0);
MODULE_PARM_DESC(disable64, "disable 64-bit pci bus transfers");
module_param(nvpibits, short, 0);
MODULE_PARM_DESC(nvpibits, "numbers of bits for vpi (default 0)");
module_param(nvcibits, short, 0);
MODULE_PARM_DESC(nvcibits, "numbers of bits for vci (default 12)");
module_param(rx_skb_reserve, short, 0);
MODULE_PARM_DESC(rx_skb_reserve, "padding for receive skb (default 16)");
module_param(irq_coalesce, bool, 0);
MODULE_PARM_DESC(irq_coalesce, "use interrupt coalescing (default 1)");
module_param(sdh, bool, 0);
MODULE_PARM_DESC(sdh, "use SDH framing (default 0)");
static struct pci_device_id he_pci_tbl[] = {
atm: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-15 16:44:11 +08:00
{ PCI_VDEVICE(FORE, PCI_DEVICE_ID_FORE_HE), 0 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ 0, }
};
MODULE_DEVICE_TABLE(pci, he_pci_tbl);
static struct pci_driver he_driver = {
.name = "he",
.probe = he_init_one,
Drivers: atm: remove __dev* attributes. CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22 05:25:04 +08:00
.remove = he_remove_one,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.id_table = he_pci_tbl,
};
drivers/atm/he.c: convert to module_pci_driver Signed-off-by: Libo Chen <libo.chen@huawei.com> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-14 05:52:03 +08:00
module_pci_driver(he_driver);
Copy Permalink