AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
2ef8d0f7de
kernel_optimize_test/include/linux/phy_led_triggers.h

43 lines
1.0 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 23:49:55 +08:00
/* Copyright (C) 2016 National Instruments Corp.
*/
#ifndef __PHY_LED_TRIGGERS
#define __PHY_LED_TRIGGERS
struct phy_device;
#ifdef CONFIG_LED_TRIGGER_PHY
#include <linux/leds.h>
net: phy: leds: Fix truncated LED trigger names Commit 4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and bus_id") increased the size of MII bus IDs, but forgot to update the private definition in <linux/phy_led_triggers.h>. This may cause: 1. Truncation of LED trigger names, 2. Duplicate LED trigger names, 3. Failures registering LED triggers, 4. Crashes due to bad error handling in the LED trigger failure path. To fix this, and prevent the definitions going out of sync again in the future, let the PHY LED trigger code use the existing MII_BUS_ID_SIZE definition. Example: - Before I had triggers "ee700000.etherne:01:100Mbps" and "ee700000.etherne:01:10Mbps", - After the increase of MII_BUS_ID_SIZE, both became "ee700000.ethernet-ffffffff:01:" => FAIL, - Now, the triggers are "ee700000.ethernet-ffffffff:01:100Mbps" and "ee700000.ethernet-ffffffff:01:10Mbps", which are unique again. Fixes: 4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and bus_id") Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 18:39:50 +08:00
#include <linux/phy.h>
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 23:49:55 +08:00
net: phy: leds: Don't make our own link speed names The phy core provides a handy phy_speed_to_str() helper, so use that instead of doing our own formatting of the different known link speeds. To do this, increase PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE to 11 so we can fit 'Unsupported' if necessary. Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10 02:48:03 +08:00
#define PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE 11
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 23:49:55 +08:00
net: phy: leds: Fix truncated LED trigger names Commit 4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and bus_id") increased the size of MII bus IDs, but forgot to update the private definition in <linux/phy_led_triggers.h>. This may cause: 1. Truncation of LED trigger names, 2. Duplicate LED trigger names, 3. Failures registering LED triggers, 4. Crashes due to bad error handling in the LED trigger failure path. To fix this, and prevent the definitions going out of sync again in the future, let the PHY LED trigger code use the existing MII_BUS_ID_SIZE definition. Example: - Before I had triggers "ee700000.etherne:01:100Mbps" and "ee700000.etherne:01:10Mbps", - After the increase of MII_BUS_ID_SIZE, both became "ee700000.ethernet-ffffffff:01:" => FAIL, - Now, the triggers are "ee700000.ethernet-ffffffff:01:100Mbps" and "ee700000.ethernet-ffffffff:01:10Mbps", which are unique again. Fixes: 4567d686f5c6d955 ("phy: increase size of MII_BUS_ID_SIZE and bus_id") Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25 18:39:50 +08:00
#define PHY_LINK_LED_TRIGGER_NAME_SIZE (MII_BUS_ID_SIZE + \
treewide: Use sizeof_field() macro Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-10 02:31:43 +08:00
sizeof_field(struct mdio_device, addr)+\
net: phy: leds: add support for led triggers on phy link state change Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17 23:49:55 +08:00
PHY_LED_TRIGGER_SPEED_SUFFIX_SIZE)
struct phy_led_trigger {
struct led_trigger trigger;
char name[PHY_LINK_LED_TRIGGER_NAME_SIZE];
unsigned int speed;
};
extern int phy_led_triggers_register(struct phy_device *phy);
extern void phy_led_triggers_unregister(struct phy_device *phy);
extern void phy_led_trigger_change_speed(struct phy_device *phy);
#else
static inline int phy_led_triggers_register(struct phy_device *phy)
{
return 0;
}
static inline void phy_led_triggers_unregister(struct phy_device *phy) { }
static inline void phy_led_trigger_change_speed(struct phy_device *phy) { }
#endif
#endif
Copy Permalink