kernel_optimize_test/arch/sparc64/kernel/auxio.c

192 lines
4.0 KiB
C
Raw Normal View History

/* auxio.c: Probing for the Sparc AUXIO register at boot time.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
*
* Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/oplib.h>
#include <asm/io.h>
#include <asm/sbus.h>
#include <asm/ebus.h>
#include <asm/auxio.h>
/* This cannot be static, as it is referenced in irq.c */
void __iomem *auxio_register = NULL;
enum auxio_type {
AUXIO_TYPE_NODEV,
AUXIO_TYPE_SBUS,
AUXIO_TYPE_EBUS
};
static enum auxio_type auxio_devtype = AUXIO_TYPE_NODEV;
static DEFINE_SPINLOCK(auxio_lock);
static void __auxio_sbus_set(u8 bits_on, u8 bits_off)
{
if (auxio_register) {
unsigned char regval;
unsigned long flags;
unsigned char newval;
spin_lock_irqsave(&auxio_lock, flags);
regval = sbus_readb(auxio_register);
newval = regval | bits_on;
newval &= ~bits_off;
newval &= ~AUXIO_AUX1_MASK;
sbus_writeb(newval, auxio_register);
spin_unlock_irqrestore(&auxio_lock, flags);
}
}
static void __auxio_ebus_set(u8 bits_on, u8 bits_off)
{
if (auxio_register) {
unsigned char regval;
unsigned long flags;
unsigned char newval;
spin_lock_irqsave(&auxio_lock, flags);
regval = (u8)readl(auxio_register);
newval = regval | bits_on;
newval &= ~bits_off;
writel((u32)newval, auxio_register);
spin_unlock_irqrestore(&auxio_lock, flags);
}
}
static inline void __auxio_ebus_set_led(int on)
{
(on) ? __auxio_ebus_set(AUXIO_PCIO_LED, 0) :
__auxio_ebus_set(0, AUXIO_PCIO_LED) ;
}
static inline void __auxio_sbus_set_led(int on)
{
(on) ? __auxio_sbus_set(AUXIO_AUX1_LED, 0) :
__auxio_sbus_set(0, AUXIO_AUX1_LED) ;
}
void auxio_set_led(int on)
{
switch(auxio_devtype) {
case AUXIO_TYPE_SBUS:
__auxio_sbus_set_led(on);
break;
case AUXIO_TYPE_EBUS:
__auxio_ebus_set_led(on);
break;
default:
break;
}
}
static inline void __auxio_sbus_set_lte(int on)
{
(on) ? __auxio_sbus_set(AUXIO_AUX1_LTE, 0) :
__auxio_sbus_set(0, AUXIO_AUX1_LTE) ;
}
void auxio_set_lte(int on)
{
switch(auxio_devtype) {
case AUXIO_TYPE_SBUS:
__auxio_sbus_set_lte(on);
break;
case AUXIO_TYPE_EBUS:
/* FALL-THROUGH */
default:
break;
}
}
static void __devinit auxio_report_dev(struct device_node *dp)
{
printk(KERN_INFO "AUXIO: Found device at %s\n",
dp->full_name);
}
static struct of_device_id auxio_match[] = {
{
.name = "auxio",
},
{},
};
MODULE_DEVICE_TABLE(of, auxio_match);
#ifdef CONFIG_SBUS
static int __devinit auxio_sbus_probe(struct of_device *dev, const struct of_device_id *match)
{
struct sbus_dev *sdev = to_sbus_device(&dev->dev);
auxio_devtype = AUXIO_TYPE_SBUS;
auxio_register = sbus_ioremap(&sdev->resource[0], 0,
sdev->reg_addrs[0].reg_size,
"auxiliaryIO");
if (!auxio_register)
return -ENODEV;
auxio_report_dev(dev->node);
return 0;
}
static struct of_platform_driver auxio_sbus_driver = {
.name = "auxio",
.match_table = auxio_match,
.probe = auxio_sbus_probe,
};
#endif
#ifdef CONFIG_PCI
static int __devinit auxio_ebus_probe(struct of_device *dev, const struct of_device_id *match)
{
struct linux_ebus_device *edev = to_ebus_device(&dev->dev);
auxio_devtype = AUXIO_TYPE_EBUS;
auxio_register = ioremap(edev->resource[0].start, sizeof(u32));
if (!auxio_register)
return -ENODEV;
auxio_report_dev(dev->node);
auxio_set_led(AUXIO_LED_ON);
return 0;
}
static struct of_platform_driver auxio_ebus_driver = {
.name = "auxio",
.match_table = auxio_match,
.probe = auxio_ebus_probe,
};
#endif
static int __init auxio_probe(void)
{
#ifdef CONFIG_SBUS
of_register_driver(&auxio_sbus_driver, &sbus_bus_type);
#endif
#ifdef CONFIG_PCI
of_register_driver(&auxio_ebus_driver, &ebus_bus_type);
#endif
return 0;
}
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the floppy driver
* need to use the AUXIO register.
*/
fs_initcall(auxio_probe);