kernel_optimize_test/fs/proc/vmcore.c

1198 lines
30 KiB
C
Raw Normal View History

/*
* fs/proc/vmcore.c Interface for accessing the crash
* dump from the system's previous life.
* Heavily borrowed from fs/proc/kcore.c
* Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
* Copyright (C) IBM Corporation, 2004. All rights reserved
*
*/
#include <linux/mm.h>
#include <linux/kcore.h>
#include <linux/user.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
#include <linux/export.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/printk.h>
#include <linux/bootmem.h>
#include <linux/init.h>
#include <linux/crash_dump.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include "internal.h"
/* List representing chunks of contiguous memory areas and their offsets in
* vmcore file.
*/
static LIST_HEAD(vmcore_list);
/* Stores the pointer to the buffer containing kernel elf core headers. */
static char *elfcorebuf;
static size_t elfcorebuf_sz;
static size_t elfcorebuf_sz_orig;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
static char *elfnotes_buf;
static size_t elfnotes_sz;
/* Total size of vmcore file. */
static u64 vmcore_size;
static struct proc_dir_entry *proc_vmcore;
/*
* Returns > 0 for RAM pages, 0 for non-RAM pages, < 0 on error
* The called function has to take care of module refcounting.
*/
static int (*oldmem_pfn_is_ram)(unsigned long pfn);
int register_oldmem_pfn_is_ram(int (*fn)(unsigned long pfn))
{
if (oldmem_pfn_is_ram)
return -EBUSY;
oldmem_pfn_is_ram = fn;
return 0;
}
EXPORT_SYMBOL_GPL(register_oldmem_pfn_is_ram);
void unregister_oldmem_pfn_is_ram(void)
{
oldmem_pfn_is_ram = NULL;
wmb();
}
EXPORT_SYMBOL_GPL(unregister_oldmem_pfn_is_ram);
static int pfn_is_ram(unsigned long pfn)
{
int (*fn)(unsigned long pfn);
/* pfn is ram unless fn() checks pagetype */
int ret = 1;
/*
* Ask hypervisor if the pfn is really ram.
* A ballooned page contains no data and reading from such a page
* will cause high load in the hypervisor.
*/
fn = oldmem_pfn_is_ram;
if (fn)
ret = fn(pfn);
return ret;
}
/* Reads a page from the oldmem device from given offset. */
static ssize_t read_from_oldmem(char *buf, size_t count,
u64 *ppos, int userbuf)
{
unsigned long pfn, offset;
size_t nr_bytes;
ssize_t read = 0, tmp;
if (!count)
return 0;
offset = (unsigned long)(*ppos % PAGE_SIZE);
pfn = (unsigned long)(*ppos / PAGE_SIZE);
do {
if (count > (PAGE_SIZE - offset))
nr_bytes = PAGE_SIZE - offset;
else
nr_bytes = count;
/* If pfn is not ram, return zeros for sparse dump files */
if (pfn_is_ram(pfn) == 0)
memset(buf, 0, nr_bytes);
else {
tmp = copy_oldmem_page(pfn, buf, nr_bytes,
offset, userbuf);
if (tmp < 0)
return tmp;
}
*ppos += nr_bytes;
count -= nr_bytes;
buf += nr_bytes;
read += nr_bytes;
++pfn;
offset = 0;
} while (count);
return read;
}
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
/*
* Architectures may override this function to allocate ELF header in 2nd kernel
*/
int __weak elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size)
{
return 0;
}
/*
* Architectures may override this function to free header
*/
void __weak elfcorehdr_free(unsigned long long addr)
{}
/*
* Architectures may override this function to read from ELF header
*/
ssize_t __weak elfcorehdr_read(char *buf, size_t count, u64 *ppos)
{
return read_from_oldmem(buf, count, ppos, 0);
}
/*
* Architectures may override this function to read from notes sections
*/
ssize_t __weak elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos)
{
return read_from_oldmem(buf, count, ppos, 0);
}
/*
* Architectures may override this function to map oldmem
*/
int __weak remap_oldmem_pfn_range(struct vm_area_struct *vma,
unsigned long from, unsigned long pfn,
unsigned long size, pgprot_t prot)
{
return remap_pfn_range(vma, from, pfn, size, prot);
}
/*
* Copy to either kernel or user space
*/
static int copy_to(void *target, void *src, size_t size, int userbuf)
{
if (userbuf) {
if (copy_to_user((char __user *) target, src, size))
return -EFAULT;
} else {
memcpy(target, src, size);
}
return 0;
}
/* Read from the ELF header and then the crash dump. On error, negative value is
* returned otherwise number of bytes read are returned.
*/
static ssize_t __read_vmcore(char *buffer, size_t buflen, loff_t *fpos,
int userbuf)
{
ssize_t acc = 0, tmp;
size_t tsz;
u64 start;
struct vmcore *m = NULL;
if (buflen == 0 || *fpos >= vmcore_size)
return 0;
/* trim buflen to not go beyond EOF */
if (buflen > vmcore_size - *fpos)
buflen = vmcore_size - *fpos;
/* Read ELF core header */
if (*fpos < elfcorebuf_sz) {
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
tsz = min(elfcorebuf_sz - (size_t)*fpos, buflen);
if (copy_to(buffer, elfcorebuf + *fpos, tsz, userbuf))
return -EFAULT;
buflen -= tsz;
*fpos += tsz;
buffer += tsz;
acc += tsz;
/* leave now if filled buffer already */
if (buflen == 0)
return acc;
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/* Read Elf note segment */
if (*fpos < elfcorebuf_sz + elfnotes_sz) {
void *kaddr;
tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)*fpos, buflen);
kaddr = elfnotes_buf + *fpos - elfcorebuf_sz;
if (copy_to(buffer, kaddr, tsz, userbuf))
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
return -EFAULT;
buflen -= tsz;
*fpos += tsz;
buffer += tsz;
acc += tsz;
/* leave now if filled buffer already */
if (buflen == 0)
return acc;
}
list_for_each_entry(m, &vmcore_list, list) {
if (*fpos < m->offset + m->size) {
proc-vmcore: wrong data type casting fix On i686 PAE enabled machine the contiguous physical area could be large and it can cause trimming down variables in below calculation in read_vmcore() and mmap_vmcore(): tsz = min_t(size_t, m->offset + m->size - *fpos, buflen); That is, the types being used is like below on i686: m->offset: unsigned long long int m->size: unsigned long long int *fpos: loff_t (long long int) buflen: size_t (unsigned int) So casting (m->offset + m->size - *fpos) by size_t means truncating a given value by 4GB. Suppose (m->offset + m->size - *fpos) being truncated to 0, buflen >0 then we will get tsz = 0. It is of course not an expected result. Similarly we could also get other truncated values less than buflen. Then the real size passed down is not correct any more. If (m->offset + m->size - *fpos) is above 4GB, read_vmcore or mmap_vmcore use the min_t result with truncated values being compared to buflen. Then, fpos proceeds with the wrong value so that we reach below bugs: 1) read_vmcore will refuse to continue so makedumpfile fails. 2) mmap_vmcore will trigger BUG_ON() in remap_pfn_range(). Use unsigned long long in min_t instead so that the variables in are not truncated. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Dave Young <dyoung@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jianyu Zhan <nasa4836@gmail.com> Cc: Minfei Huang <mhuang@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18 05:21:03 +08:00
tsz = (size_t)min_t(unsigned long long,
m->offset + m->size - *fpos,
buflen);
start = m->paddr + *fpos - m->offset;
tmp = read_from_oldmem(buffer, tsz, &start, userbuf);
if (tmp < 0)
return tmp;
buflen -= tsz;
*fpos += tsz;
buffer += tsz;
acc += tsz;
/* leave now if filled buffer already */
if (buflen == 0)
return acc;
}
}
return acc;
}
static ssize_t read_vmcore(struct file *file, char __user *buffer,
size_t buflen, loff_t *fpos)
{
return __read_vmcore((__force char *) buffer, buflen, fpos, 1);
}
/*
* The vmcore fault handler uses the page cache and fills data using the
* standard __vmcore_read() function.
*
* On s390 the fault handler is used for memory regions that can't be mapped
* directly with remap_pfn_range().
*/
static int mmap_vmcore_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
#ifdef CONFIG_S390
struct address_space *mapping = vma->vm_file->f_mapping;
pgoff_t index = vmf->pgoff;
struct page *page;
loff_t offset;
char *buf;
int rc;
page = find_or_create_page(mapping, index, GFP_KERNEL);
if (!page)
return VM_FAULT_OOM;
if (!PageUptodate(page)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
offset = (loff_t) index << PAGE_SHIFT;
buf = __va((page_to_pfn(page) << PAGE_SHIFT));
rc = __read_vmcore(buf, PAGE_SIZE, &offset, 0);
if (rc < 0) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return (rc == -ENOMEM) ? VM_FAULT_OOM : VM_FAULT_SIGBUS;
}
SetPageUptodate(page);
}
unlock_page(page);
vmf->page = page;
return 0;
#else
return VM_FAULT_SIGBUS;
#endif
}
static const struct vm_operations_struct vmcore_mmap_ops = {
.fault = mmap_vmcore_fault,
};
/**
* alloc_elfnotes_buf - allocate buffer for ELF note segment in
* vmalloc memory
*
* @notes_sz: size of buffer
*
* If CONFIG_MMU is defined, use vmalloc_user() to allow users to mmap
* the buffer to user-space by means of remap_vmalloc_range().
*
* If CONFIG_MMU is not defined, use vzalloc() since mmap_vmcore() is
* disabled and there's no need to allow users to mmap the buffer.
*/
static inline char *alloc_elfnotes_buf(size_t notes_sz)
{
#ifdef CONFIG_MMU
return vmalloc_user(notes_sz);
#else
return vzalloc(notes_sz);
#endif
}
/*
* Disable mmap_vmcore() if CONFIG_MMU is not defined. MMU is
* essential for mmap_vmcore() in order to map physically
* non-contiguous objects (ELF header, ELF note segment and memory
* regions in the 1st kernel pointed to by PT_LOAD entries) into
* virtually contiguous user-space in ELF layout.
*/
#ifdef CONFIG_MMU
2014-08-09 05:22:05 +08:00
/*
* remap_oldmem_pfn_checked - do remap_oldmem_pfn_range replacing all pages
* reported as not being ram with the zero page.
*
* @vma: vm_area_struct describing requested mapping
* @from: start remapping from
* @pfn: page frame number to start remapping to
* @size: remapping size
* @prot: protection bits
*
* Returns zero on success, -EAGAIN on failure.
*/
static int remap_oldmem_pfn_checked(struct vm_area_struct *vma,
unsigned long from, unsigned long pfn,
unsigned long size, pgprot_t prot)
{
unsigned long map_size;
unsigned long pos_start, pos_end, pos;
unsigned long zeropage_pfn = my_zero_pfn(0);
size_t len = 0;
pos_start = pfn;
pos_end = pfn + (size >> PAGE_SHIFT);
for (pos = pos_start; pos < pos_end; ++pos) {
if (!pfn_is_ram(pos)) {
/*
* We hit a page which is not ram. Remap the continuous
* region between pos_start and pos-1 and replace
* the non-ram page at pos with the zero page.
*/
if (pos > pos_start) {
/* Remap continuous region */
map_size = (pos - pos_start) << PAGE_SHIFT;
if (remap_oldmem_pfn_range(vma, from + len,
pos_start, map_size,
prot))
goto fail;
len += map_size;
}
/* Remap the zero page */
if (remap_oldmem_pfn_range(vma, from + len,
zeropage_pfn,
PAGE_SIZE, prot))
goto fail;
len += PAGE_SIZE;
pos_start = pos + 1;
}
}
if (pos > pos_start) {
/* Remap the rest */
map_size = (pos - pos_start) << PAGE_SHIFT;
if (remap_oldmem_pfn_range(vma, from + len, pos_start,
map_size, prot))
goto fail;
}
return 0;
fail:
do_munmap(vma->vm_mm, from, len);
return -EAGAIN;
}
static int vmcore_remap_oldmem_pfn(struct vm_area_struct *vma,
unsigned long from, unsigned long pfn,
unsigned long size, pgprot_t prot)
{
/*
* Check if oldmem_pfn_is_ram was registered to avoid
* looping over all pages without a reason.
*/
if (oldmem_pfn_is_ram)
return remap_oldmem_pfn_checked(vma, from, pfn, size, prot);
else
return remap_oldmem_pfn_range(vma, from, pfn, size, prot);
}
static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
{
size_t size = vma->vm_end - vma->vm_start;
u64 start, end, len, tsz;
struct vmcore *m;
start = (u64)vma->vm_pgoff << PAGE_SHIFT;
end = start + size;
if (size > vmcore_size || end > vmcore_size)
return -EINVAL;
if (vma->vm_flags & (VM_WRITE | VM_EXEC))
return -EPERM;
vma->vm_flags &= ~(VM_MAYWRITE | VM_MAYEXEC);
vma->vm_flags |= VM_MIXEDMAP;
vma->vm_ops = &vmcore_mmap_ops;
len = 0;
if (start < elfcorebuf_sz) {
u64 pfn;
tsz = min(elfcorebuf_sz - (size_t)start, size);
pfn = __pa(elfcorebuf + start) >> PAGE_SHIFT;
if (remap_pfn_range(vma, vma->vm_start, pfn, tsz,
vma->vm_page_prot))
return -EAGAIN;
size -= tsz;
start += tsz;
len += tsz;
if (size == 0)
return 0;
}
if (start < elfcorebuf_sz + elfnotes_sz) {
void *kaddr;
tsz = min(elfcorebuf_sz + elfnotes_sz - (size_t)start, size);
kaddr = elfnotes_buf + start - elfcorebuf_sz;
if (remap_vmalloc_range_partial(vma, vma->vm_start + len,
kaddr, tsz))
goto fail;
size -= tsz;
start += tsz;
len += tsz;
if (size == 0)
return 0;
}
list_for_each_entry(m, &vmcore_list, list) {
if (start < m->offset + m->size) {
u64 paddr = 0;
proc-vmcore: wrong data type casting fix On i686 PAE enabled machine the contiguous physical area could be large and it can cause trimming down variables in below calculation in read_vmcore() and mmap_vmcore(): tsz = min_t(size_t, m->offset + m->size - *fpos, buflen); That is, the types being used is like below on i686: m->offset: unsigned long long int m->size: unsigned long long int *fpos: loff_t (long long int) buflen: size_t (unsigned int) So casting (m->offset + m->size - *fpos) by size_t means truncating a given value by 4GB. Suppose (m->offset + m->size - *fpos) being truncated to 0, buflen >0 then we will get tsz = 0. It is of course not an expected result. Similarly we could also get other truncated values less than buflen. Then the real size passed down is not correct any more. If (m->offset + m->size - *fpos) is above 4GB, read_vmcore or mmap_vmcore use the min_t result with truncated values being compared to buflen. Then, fpos proceeds with the wrong value so that we reach below bugs: 1) read_vmcore will refuse to continue so makedumpfile fails. 2) mmap_vmcore will trigger BUG_ON() in remap_pfn_range(). Use unsigned long long in min_t instead so that the variables in are not truncated. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Dave Young <dyoung@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jianyu Zhan <nasa4836@gmail.com> Cc: Minfei Huang <mhuang@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-18 05:21:03 +08:00
tsz = (size_t)min_t(unsigned long long,
m->offset + m->size - start, size);
paddr = m->paddr + start - m->offset;
2014-08-09 05:22:05 +08:00
if (vmcore_remap_oldmem_pfn(vma, vma->vm_start + len,
paddr >> PAGE_SHIFT, tsz,
vma->vm_page_prot))
goto fail;
size -= tsz;
start += tsz;
len += tsz;
if (size == 0)
return 0;
}
}
return 0;
fail:
do_munmap(vma->vm_mm, vma->vm_start, len);
return -EAGAIN;
}
#else
static int mmap_vmcore(struct file *file, struct vm_area_struct *vma)
{
return -ENOSYS;
}
#endif
static const struct file_operations proc_vmcore_operations = {
.read = read_vmcore,
.llseek = default_llseek,
.mmap = mmap_vmcore,
};
static struct vmcore* __init get_new_element(void)
{
return kzalloc(sizeof(struct vmcore), GFP_KERNEL);
}
static u64 __init get_vmcore_size(size_t elfsz, size_t elfnotesegsz,
struct list_head *vc_list)
{
u64 size;
struct vmcore *m;
size = elfsz + elfnotesegsz;
list_for_each_entry(m, vc_list, list) {
size += m->size;
}
return size;
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/**
* update_note_header_size_elf64 - update p_memsz member of each PT_NOTE entry
*
* @ehdr_ptr: ELF header
*
* This function updates p_memsz member of each PT_NOTE entry in the
* program header table pointed to by @ehdr_ptr to real size of ELF
* note segment.
*/
static int __init update_note_header_size_elf64(const Elf64_Ehdr *ehdr_ptr)
{
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
int i, rc=0;
Elf64_Phdr *phdr_ptr;
Elf64_Nhdr *nhdr_ptr;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr_ptr = (Elf64_Phdr *)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
void *notes_section;
u64 offset, max_sz, sz, real_sz = 0;
if (phdr_ptr->p_type != PT_NOTE)
continue;
max_sz = phdr_ptr->p_memsz;
offset = phdr_ptr->p_offset;
notes_section = kmalloc(max_sz, GFP_KERNEL);
if (!notes_section)
return -ENOMEM;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read_notes(notes_section, max_sz, &offset);
if (rc < 0) {
kfree(notes_section);
return rc;
}
nhdr_ptr = notes_section;
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf64_Nhdr) +
(((u64)nhdr_ptr->n_namesz + 3) & ~3) +
(((u64)nhdr_ptr->n_descsz + 3) & ~3);
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
if ((real_sz + sz) > max_sz) {
pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
break;
}
real_sz += sz;
nhdr_ptr = (Elf64_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr_ptr->p_memsz = real_sz;
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
if (real_sz == 0) {
pr_warn("Warning: Zero PT_NOTE entries found\n");
}
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
return 0;
}
/**
* get_note_number_and_size_elf64 - get the number of PT_NOTE program
* headers and sum of real size of their ELF note segment headers and
* data.
*
* @ehdr_ptr: ELF header
* @nr_ptnote: buffer for the number of PT_NOTE program headers
* @sz_ptnote: buffer for size of unique PT_NOTE program header
*
* This function is used to merge multiple PT_NOTE program headers
* into a unique single one. The resulting unique entry will have
* @sz_ptnote in its phdr->p_mem.
*
* It is assumed that program headers with PT_NOTE type pointed to by
* @ehdr_ptr has already been updated by update_note_header_size_elf64
* and each of PT_NOTE program headers has actual ELF note segment
* size in its p_memsz member.
*/
static int __init get_note_number_and_size_elf64(const Elf64_Ehdr *ehdr_ptr,
int *nr_ptnote, u64 *sz_ptnote)
{
int i;
Elf64_Phdr *phdr_ptr;
*nr_ptnote = *sz_ptnote = 0;
phdr_ptr = (Elf64_Phdr *)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
if (phdr_ptr->p_type != PT_NOTE)
continue;
*nr_ptnote += 1;
*sz_ptnote += phdr_ptr->p_memsz;
}
return 0;
}
/**
* copy_notes_elf64 - copy ELF note segments in a given buffer
*
* @ehdr_ptr: ELF header
* @notes_buf: buffer into which ELF note segments are copied
*
* This function is used to copy ELF note segment in the 1st kernel
* into the buffer @notes_buf in the 2nd kernel. It is assumed that
* size of the buffer @notes_buf is equal to or larger than sum of the
* real ELF note segment headers and data.
*
* It is assumed that program headers with PT_NOTE type pointed to by
* @ehdr_ptr has already been updated by update_note_header_size_elf64
* and each of PT_NOTE program headers has actual ELF note segment
* size in its p_memsz member.
*/
static int __init copy_notes_elf64(const Elf64_Ehdr *ehdr_ptr, char *notes_buf)
{
int i, rc=0;
Elf64_Phdr *phdr_ptr;
phdr_ptr = (Elf64_Phdr*)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
u64 offset;
if (phdr_ptr->p_type != PT_NOTE)
continue;
offset = phdr_ptr->p_offset;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read_notes(notes_buf, phdr_ptr->p_memsz,
&offset);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
if (rc < 0)
return rc;
notes_buf += phdr_ptr->p_memsz;
}
return 0;
}
/* Merges all the PT_NOTE headers into one. */
static int __init merge_note_headers_elf64(char *elfptr, size_t *elfsz,
char **notes_buf, size_t *notes_sz)
{
int i, nr_ptnote=0, rc=0;
char *tmp;
Elf64_Ehdr *ehdr_ptr;
Elf64_Phdr phdr;
u64 phdr_sz = 0, note_off;
ehdr_ptr = (Elf64_Ehdr *)elfptr;
rc = update_note_header_size_elf64(ehdr_ptr);
if (rc < 0)
return rc;
rc = get_note_number_and_size_elf64(ehdr_ptr, &nr_ptnote, &phdr_sz);
if (rc < 0)
return rc;
*notes_sz = roundup(phdr_sz, PAGE_SIZE);
*notes_buf = alloc_elfnotes_buf(*notes_sz);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
if (!*notes_buf)
return -ENOMEM;
rc = copy_notes_elf64(ehdr_ptr, *notes_buf);
if (rc < 0)
return rc;
/* Prepare merged PT_NOTE program header. */
phdr.p_type = PT_NOTE;
phdr.p_flags = 0;
note_off = sizeof(Elf64_Ehdr) +
(ehdr_ptr->e_phnum - nr_ptnote +1) * sizeof(Elf64_Phdr);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr.p_offset = roundup(note_off, PAGE_SIZE);
phdr.p_vaddr = phdr.p_paddr = 0;
phdr.p_filesz = phdr.p_memsz = phdr_sz;
phdr.p_align = 0;
/* Add merged PT_NOTE program header*/
tmp = elfptr + sizeof(Elf64_Ehdr);
memcpy(tmp, &phdr, sizeof(phdr));
tmp += sizeof(phdr);
/* Remove unwanted PT_NOTE program headers. */
i = (nr_ptnote - 1) * sizeof(Elf64_Phdr);
*elfsz = *elfsz - i;
memmove(tmp, tmp+i, ((*elfsz)-sizeof(Elf64_Ehdr)-sizeof(Elf64_Phdr)));
memset(elfptr + *elfsz, 0, i);
*elfsz = roundup(*elfsz, PAGE_SIZE);
/* Modify e_phnum to reflect merged headers. */
ehdr_ptr->e_phnum = ehdr_ptr->e_phnum - nr_ptnote + 1;
return 0;
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/**
* update_note_header_size_elf32 - update p_memsz member of each PT_NOTE entry
*
* @ehdr_ptr: ELF header
*
* This function updates p_memsz member of each PT_NOTE entry in the
* program header table pointed to by @ehdr_ptr to real size of ELF
* note segment.
*/
static int __init update_note_header_size_elf32(const Elf32_Ehdr *ehdr_ptr)
{
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
int i, rc=0;
Elf32_Phdr *phdr_ptr;
Elf32_Nhdr *nhdr_ptr;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr_ptr = (Elf32_Phdr *)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
void *notes_section;
u64 offset, max_sz, sz, real_sz = 0;
if (phdr_ptr->p_type != PT_NOTE)
continue;
max_sz = phdr_ptr->p_memsz;
offset = phdr_ptr->p_offset;
notes_section = kmalloc(max_sz, GFP_KERNEL);
if (!notes_section)
return -ENOMEM;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read_notes(notes_section, max_sz, &offset);
if (rc < 0) {
kfree(notes_section);
return rc;
}
nhdr_ptr = notes_section;
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf32_Nhdr) +
(((u64)nhdr_ptr->n_namesz + 3) & ~3) +
(((u64)nhdr_ptr->n_descsz + 3) & ~3);
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
if ((real_sz + sz) > max_sz) {
pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
break;
}
real_sz += sz;
nhdr_ptr = (Elf32_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr_ptr->p_memsz = real_sz;
vmcore: prevent PT_NOTE p_memsz overflow during header update Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-11 06:25:36 +08:00
if (real_sz == 0) {
pr_warn("Warning: Zero PT_NOTE entries found\n");
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
}
return 0;
}
/**
* get_note_number_and_size_elf32 - get the number of PT_NOTE program
* headers and sum of real size of their ELF note segment headers and
* data.
*
* @ehdr_ptr: ELF header
* @nr_ptnote: buffer for the number of PT_NOTE program headers
* @sz_ptnote: buffer for size of unique PT_NOTE program header
*
* This function is used to merge multiple PT_NOTE program headers
* into a unique single one. The resulting unique entry will have
* @sz_ptnote in its phdr->p_mem.
*
* It is assumed that program headers with PT_NOTE type pointed to by
* @ehdr_ptr has already been updated by update_note_header_size_elf32
* and each of PT_NOTE program headers has actual ELF note segment
* size in its p_memsz member.
*/
static int __init get_note_number_and_size_elf32(const Elf32_Ehdr *ehdr_ptr,
int *nr_ptnote, u64 *sz_ptnote)
{
int i;
Elf32_Phdr *phdr_ptr;
*nr_ptnote = *sz_ptnote = 0;
phdr_ptr = (Elf32_Phdr *)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
if (phdr_ptr->p_type != PT_NOTE)
continue;
*nr_ptnote += 1;
*sz_ptnote += phdr_ptr->p_memsz;
}
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
return 0;
}
/**
* copy_notes_elf32 - copy ELF note segments in a given buffer
*
* @ehdr_ptr: ELF header
* @notes_buf: buffer into which ELF note segments are copied
*
* This function is used to copy ELF note segment in the 1st kernel
* into the buffer @notes_buf in the 2nd kernel. It is assumed that
* size of the buffer @notes_buf is equal to or larger than sum of the
* real ELF note segment headers and data.
*
* It is assumed that program headers with PT_NOTE type pointed to by
* @ehdr_ptr has already been updated by update_note_header_size_elf32
* and each of PT_NOTE program headers has actual ELF note segment
* size in its p_memsz member.
*/
static int __init copy_notes_elf32(const Elf32_Ehdr *ehdr_ptr, char *notes_buf)
{
int i, rc=0;
Elf32_Phdr *phdr_ptr;
phdr_ptr = (Elf32_Phdr*)(ehdr_ptr + 1);
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
u64 offset;
if (phdr_ptr->p_type != PT_NOTE)
continue;
offset = phdr_ptr->p_offset;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read_notes(notes_buf, phdr_ptr->p_memsz,
&offset);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
if (rc < 0)
return rc;
notes_buf += phdr_ptr->p_memsz;
}
return 0;
}
/* Merges all the PT_NOTE headers into one. */
static int __init merge_note_headers_elf32(char *elfptr, size_t *elfsz,
char **notes_buf, size_t *notes_sz)
{
int i, nr_ptnote=0, rc=0;
char *tmp;
Elf32_Ehdr *ehdr_ptr;
Elf32_Phdr phdr;
u64 phdr_sz = 0, note_off;
ehdr_ptr = (Elf32_Ehdr *)elfptr;
rc = update_note_header_size_elf32(ehdr_ptr);
if (rc < 0)
return rc;
rc = get_note_number_and_size_elf32(ehdr_ptr, &nr_ptnote, &phdr_sz);
if (rc < 0)
return rc;
*notes_sz = roundup(phdr_sz, PAGE_SIZE);
*notes_buf = alloc_elfnotes_buf(*notes_sz);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
if (!*notes_buf)
return -ENOMEM;
rc = copy_notes_elf32(ehdr_ptr, *notes_buf);
if (rc < 0)
return rc;
/* Prepare merged PT_NOTE program header. */
phdr.p_type = PT_NOTE;
phdr.p_flags = 0;
note_off = sizeof(Elf32_Ehdr) +
(ehdr_ptr->e_phnum - nr_ptnote +1) * sizeof(Elf32_Phdr);
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
phdr.p_offset = roundup(note_off, PAGE_SIZE);
phdr.p_vaddr = phdr.p_paddr = 0;
phdr.p_filesz = phdr.p_memsz = phdr_sz;
phdr.p_align = 0;
/* Add merged PT_NOTE program header*/
tmp = elfptr + sizeof(Elf32_Ehdr);
memcpy(tmp, &phdr, sizeof(phdr));
tmp += sizeof(phdr);
/* Remove unwanted PT_NOTE program headers. */
i = (nr_ptnote - 1) * sizeof(Elf32_Phdr);
*elfsz = *elfsz - i;
memmove(tmp, tmp+i, ((*elfsz)-sizeof(Elf32_Ehdr)-sizeof(Elf32_Phdr)));
memset(elfptr + *elfsz, 0, i);
*elfsz = roundup(*elfsz, PAGE_SIZE);
/* Modify e_phnum to reflect merged headers. */
ehdr_ptr->e_phnum = ehdr_ptr->e_phnum - nr_ptnote + 1;
return 0;
}
/* Add memory chunks represented by program headers to vmcore list. Also update
* the new offset fields of exported program headers. */
static int __init process_ptload_program_headers_elf64(char *elfptr,
size_t elfsz,
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
size_t elfnotes_sz,
struct list_head *vc_list)
{
int i;
Elf64_Ehdr *ehdr_ptr;
Elf64_Phdr *phdr_ptr;
loff_t vmcore_off;
struct vmcore *new;
ehdr_ptr = (Elf64_Ehdr *)elfptr;
phdr_ptr = (Elf64_Phdr*)(elfptr + sizeof(Elf64_Ehdr)); /* PT_NOTE hdr */
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/* Skip Elf header, program headers and Elf note segment. */
vmcore_off = elfsz + elfnotes_sz;
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
2013-07-04 06:02:15 +08:00
u64 paddr, start, end, size;
if (phdr_ptr->p_type != PT_LOAD)
continue;
2013-07-04 06:02:15 +08:00
paddr = phdr_ptr->p_offset;
start = rounddown(paddr, PAGE_SIZE);
end = roundup(paddr + phdr_ptr->p_memsz, PAGE_SIZE);
size = end - start;
/* Add this contiguous chunk of memory to vmcore list.*/
new = get_new_element();
if (!new)
return -ENOMEM;
2013-07-04 06:02:15 +08:00
new->paddr = start;
new->size = size;
list_add_tail(&new->list, vc_list);
/* Update the program header offset. */
2013-07-04 06:02:15 +08:00
phdr_ptr->p_offset = vmcore_off + (paddr - start);
vmcore_off = vmcore_off + size;
}
return 0;
}
static int __init process_ptload_program_headers_elf32(char *elfptr,
size_t elfsz,
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
size_t elfnotes_sz,
struct list_head *vc_list)
{
int i;
Elf32_Ehdr *ehdr_ptr;
Elf32_Phdr *phdr_ptr;
loff_t vmcore_off;
struct vmcore *new;
ehdr_ptr = (Elf32_Ehdr *)elfptr;
phdr_ptr = (Elf32_Phdr*)(elfptr + sizeof(Elf32_Ehdr)); /* PT_NOTE hdr */
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/* Skip Elf header, program headers and Elf note segment. */
vmcore_off = elfsz + elfnotes_sz;
for (i = 0; i < ehdr_ptr->e_phnum; i++, phdr_ptr++) {
2013-07-04 06:02:15 +08:00
u64 paddr, start, end, size;
if (phdr_ptr->p_type != PT_LOAD)
continue;
2013-07-04 06:02:15 +08:00
paddr = phdr_ptr->p_offset;
start = rounddown(paddr, PAGE_SIZE);
end = roundup(paddr + phdr_ptr->p_memsz, PAGE_SIZE);
size = end - start;
/* Add this contiguous chunk of memory to vmcore list.*/
new = get_new_element();
if (!new)
return -ENOMEM;
2013-07-04 06:02:15 +08:00
new->paddr = start;
new->size = size;
list_add_tail(&new->list, vc_list);
/* Update the program header offset */
2013-07-04 06:02:15 +08:00
phdr_ptr->p_offset = vmcore_off + (paddr - start);
vmcore_off = vmcore_off + size;
}
return 0;
}
/* Sets offset fields of vmcore elements. */
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
static void __init set_vmcore_list_offsets(size_t elfsz, size_t elfnotes_sz,
struct list_head *vc_list)
{
loff_t vmcore_off;
struct vmcore *m;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
/* Skip Elf header, program headers and Elf note segment. */
vmcore_off = elfsz + elfnotes_sz;
list_for_each_entry(m, vc_list, list) {
m->offset = vmcore_off;
vmcore_off += m->size;
}
}
static void free_elfcorebuf(void)
{
free_pages((unsigned long)elfcorebuf, get_order(elfcorebuf_sz_orig));
elfcorebuf = NULL;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
vfree(elfnotes_buf);
elfnotes_buf = NULL;
}
static int __init parse_crash_elf64_headers(void)
{
int rc=0;
Elf64_Ehdr ehdr;
u64 addr;
addr = elfcorehdr_addr;
/* Read Elf header */
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read((char *)&ehdr, sizeof(Elf64_Ehdr), &addr);
if (rc < 0)
return rc;
/* Do some basic Verification. */
if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0 ||
(ehdr.e_type != ET_CORE) ||
!vmcore_elf64_check_arch(&ehdr) ||
ehdr.e_ident[EI_CLASS] != ELFCLASS64 ||
ehdr.e_ident[EI_VERSION] != EV_CURRENT ||
ehdr.e_version != EV_CURRENT ||
ehdr.e_ehsize != sizeof(Elf64_Ehdr) ||
ehdr.e_phentsize != sizeof(Elf64_Phdr) ||
ehdr.e_phnum == 0) {
pr_warn("Warning: Core image elf header is not sane\n");
return -EINVAL;
}
/* Read in all elf headers. */
elfcorebuf_sz_orig = sizeof(Elf64_Ehdr) +
ehdr.e_phnum * sizeof(Elf64_Phdr);
elfcorebuf_sz = elfcorebuf_sz_orig;
elfcorebuf = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(elfcorebuf_sz_orig));
if (!elfcorebuf)
return -ENOMEM;
addr = elfcorehdr_addr;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read(elfcorebuf, elfcorebuf_sz_orig, &addr);
if (rc < 0)
goto fail;
/* Merge all PT_NOTE headers into one. */
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
rc = merge_note_headers_elf64(elfcorebuf, &elfcorebuf_sz,
&elfnotes_buf, &elfnotes_sz);
if (rc)
goto fail;
rc = process_ptload_program_headers_elf64(elfcorebuf, elfcorebuf_sz,
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
elfnotes_sz, &vmcore_list);
if (rc)
goto fail;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
set_vmcore_list_offsets(elfcorebuf_sz, elfnotes_sz, &vmcore_list);
return 0;
fail:
free_elfcorebuf();
return rc;
}
static int __init parse_crash_elf32_headers(void)
{
int rc=0;
Elf32_Ehdr ehdr;
u64 addr;
addr = elfcorehdr_addr;
/* Read Elf header */
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read((char *)&ehdr, sizeof(Elf32_Ehdr), &addr);
if (rc < 0)
return rc;
/* Do some basic Verification. */
if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0 ||
(ehdr.e_type != ET_CORE) ||
!vmcore_elf32_check_arch(&ehdr) ||
ehdr.e_ident[EI_CLASS] != ELFCLASS32||
ehdr.e_ident[EI_VERSION] != EV_CURRENT ||
ehdr.e_version != EV_CURRENT ||
ehdr.e_ehsize != sizeof(Elf32_Ehdr) ||
ehdr.e_phentsize != sizeof(Elf32_Phdr) ||
ehdr.e_phnum == 0) {
pr_warn("Warning: Core image elf header is not sane\n");
return -EINVAL;
}
/* Read in all elf headers. */
elfcorebuf_sz_orig = sizeof(Elf32_Ehdr) + ehdr.e_phnum * sizeof(Elf32_Phdr);
elfcorebuf_sz = elfcorebuf_sz_orig;
elfcorebuf = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(elfcorebuf_sz_orig));
if (!elfcorebuf)
return -ENOMEM;
addr = elfcorehdr_addr;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read(elfcorebuf, elfcorebuf_sz_orig, &addr);
if (rc < 0)
goto fail;
/* Merge all PT_NOTE headers into one. */
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
rc = merge_note_headers_elf32(elfcorebuf, &elfcorebuf_sz,
&elfnotes_buf, &elfnotes_sz);
if (rc)
goto fail;
rc = process_ptload_program_headers_elf32(elfcorebuf, elfcorebuf_sz,
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
elfnotes_sz, &vmcore_list);
if (rc)
goto fail;
vmcore: allocate ELF note segment in the 2nd kernel vmalloc memory The reasons why we don't allocate ELF note segment in the 1st kernel (old memory) on page boundary is to keep backward compatibility for old kernels, and that if doing so, we waste not a little memory due to round-up operation to fit the memory to page boundary since most of the buffers are in per-cpu area. ELF notes are per-cpu, so total size of ELF note segments depends on number of CPUs. The current maximum number of CPUs on x86_64 is 5192, and there's already system with 4192 CPUs in SGI, where total size amounts to 1MB. This can be larger in the near future or possibly even now on another architecture that has larger size of note per a single cpu. Thus, to avoid the case where memory allocation for large block fails, we allocate vmcore objects on vmalloc memory. This patch adds elfnotes_buf and elfnotes_sz variables to keep pointer to the ELF note segment buffer and its size. There's no longer the vmcore object that corresponds to the ELF note segment in vmcore_list. Accordingly, read_vmcore() has new case for ELF note segment and set_vmcore_list_offsets_elf{64,32}() and other helper functions starts calculating offset from sum of size of ELF headers and size of ELF note segment. [akpm@linux-foundation.org: use min(), fix error-path vzalloc() leaks] Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp> Cc: Lisa Mitchell <lisa.mitchell@hp.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:02:19 +08:00
set_vmcore_list_offsets(elfcorebuf_sz, elfnotes_sz, &vmcore_list);
return 0;
fail:
free_elfcorebuf();
return rc;
}
static int __init parse_crash_elf_headers(void)
{
unsigned char e_ident[EI_NIDENT];
u64 addr;
int rc=0;
addr = elfcorehdr_addr;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
rc = elfcorehdr_read(e_ident, EI_NIDENT, &addr);
if (rc < 0)
return rc;
if (memcmp(e_ident, ELFMAG, SELFMAG) != 0) {
pr_warn("Warning: Core image elf header not found\n");
return -EINVAL;
}
if (e_ident[EI_CLASS] == ELFCLASS64) {
rc = parse_crash_elf64_headers();
if (rc)
return rc;
} else if (e_ident[EI_CLASS] == ELFCLASS32) {
rc = parse_crash_elf32_headers();
if (rc)
return rc;
} else {
pr_warn("Warning: Core image elf header is not sane\n");
return -EINVAL;
}
/* Determine vmcore size. */
vmcore_size = get_vmcore_size(elfcorebuf_sz, elfnotes_sz,
&vmcore_list);
return 0;
}
/* Init function for vmcore module. */
static int __init vmcore_init(void)
{
int rc = 0;
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
/* Allow architectures to allocate ELF header in 2nd kernel */
rc = elfcorehdr_alloc(&elfcorehdr_addr, &elfcorehdr_size);
if (rc)
return rc;
/*
* If elfcorehdr= has been passed in cmdline or created in 2nd kernel,
* then capture the dump.
*/
if (!(is_vmcore_usable()))
return rc;
rc = parse_crash_elf_headers();
if (rc) {
pr_warn("Kdump: vmcore not initialized\n");
return rc;
}
vmcore: introduce ELF header in new memory feature For s390 we want to use /proc/vmcore for our SCSI stand-alone dump (zfcpdump). We have support where the first HSA_SIZE bytes are saved into a hypervisor owned memory area (HSA) before the kdump kernel is booted. When the kdump kernel starts, it is restricted to use only HSA_SIZE bytes. The advantages of this mechanism are: * No crashkernel memory has to be defined in the old kernel. * Early boot problems (before kexec_load has been done) can be dumped * Non-Linux systems can be dumped. We modify the s390 copy_oldmem_page() function to read from the HSA memory if memory below HSA_SIZE bytes is requested. Since we cannot use the kexec tool to load the kernel in this scenario, we have to build the ELF header in the 2nd (kdump/new) kernel. So with the following patch set we would like to introduce the new function that the ELF header for /proc/vmcore can be created in the 2nd kernel memory. The following steps are done during zfcpdump execution: 1. Production system crashes 2. User boots a SCSI disk that has been prepared with the zfcpdump tool 3. Hypervisor saves CPU state of boot CPU and HSA_SIZE bytes of memory into HSA 4. Boot loader loads kernel into low memory area 5. Kernel boots and uses only HSA_SIZE bytes of memory 6. Kernel saves registers of non-boot CPUs 7. Kernel does memory detection for dump memory map 8. Kernel creates ELF header for /proc/vmcore 9. /proc/vmcore uses this header for initialization 10. The zfcpdump user space reads /proc/vmcore to write dump to SCSI disk - copy_oldmem_page() copies from HSA for memory below HSA_SIZE - copy_oldmem_page() copies from real memory for memory above HSA_SIZE Currently for s390 we create the ELF core header in the 2nd kernel with a small trick. We relocate the addresses in the ELF header in a way that for the /proc/vmcore code it seems to be in the 1st kernel (old) memory and the read_from_oldmem() returns the correct data. This allows the /proc/vmcore code to use the ELF header in the 2nd kernel. This patch: Exchange the old mechanism with the new and much cleaner function call override feature that now offcially allows to create the ELF core header in the 2nd kernel. To use the new feature the following function have to be defined by the architecture backend code to read from new memory: * elfcorehdr_alloc: Allocate ELF header * elfcorehdr_free: Free the memory of the ELF header * elfcorehdr_read: Read from ELF header * elfcorehdr_read_notes: Read from ELF notes Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Willeke <willeke@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 05:24:49 +08:00
elfcorehdr_free(elfcorehdr_addr);
elfcorehdr_addr = ELFCORE_ADDR_ERR;
proc_vmcore = proc_create("vmcore", S_IRUSR, NULL, &proc_vmcore_operations);
if (proc_vmcore)
proc_vmcore->size = vmcore_size;
return 0;
}
fs_initcall(vmcore_init);
/* Cleanup function for vmcore module. */
void vmcore_cleanup(void)
{
struct list_head *pos, *next;
if (proc_vmcore) {
proc_remove(proc_vmcore);
proc_vmcore = NULL;
}
/* clear the vmcore list. */
list_for_each_safe(pos, next, &vmcore_list) {
struct vmcore *m;
m = list_entry(pos, struct vmcore, list);
list_del(&m->list);
kfree(m);
}
free_elfcorebuf();
}