kernel_optimize_test/mm/filemap.c

3488 lines
96 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/mm/filemap.c
*
* Copyright (C) 1994-1999 Linus Torvalds
*/
/*
* This file handles the generic file mmap semantics used by
* most "normal" filesystems (but you don't /have/ to use this:
* the NFS filesystem used to do this differently, for example)
*/
#include <linux/export.h>
#include <linux/compiler.h>
dax: support dirty DAX entries in radix tree Add support for tracking dirty DAX entries in the struct address_space radix tree. This tree is already used for dirty page writeback, and it already supports the use of exceptional (non struct page*) entries. In order to properly track dirty DAX pages we will insert new exceptional entries into the radix tree that represent dirty DAX PTE or PMD pages. These exceptional entries will also contain the writeback addresses for the PTE or PMD faults that we can use at fsync/msync time. There are currently two types of exceptional entries (shmem and shadow) that can be placed into the radix tree, and this adds a third. We rely on the fact that only one type of exceptional entry can be found in a given radix tree based on its usage. This happens for free with DAX vs shmem but we explicitly prevent shadow entries from being added to radix trees for DAX mappings. The only shadow entries that would be generated for DAX radix trees would be to track zero page mappings that were created for holes. These pages would receive minimal benefit from having shadow entries, and the choice to have only one type of exceptional entry in a given radix tree makes the logic simpler both in clear_exceptional_entry() and in the rest of DAX. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dave Chinner <david@fromorbit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Kara <jack@suse.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-23 07:10:40 +08:00
#include <linux/dax.h>
#include <linux/fs.h>
#include <linux/sched/signal.h>
[PATCH] x86: cache pollution aware __copy_from_user_ll() Use the x86 cache-bypassing copy instructions for copy_from_user(). Some performance data are Total of GLOBAL_POWER_EVENTS (CPU cycle samples) 2.6.12.4.orig 1921587 2.6.12.4.nt 1599424 1599424/1921587=83.23% (16.77% reduction) BSQ_CACHE_REFERENCE (L3 cache miss) 2.6.12.4.orig 57427 2.6.12.4.nt 20858 20858/57427=36.32% (63.7% reduction) L3 cache miss reduction of __copy_from_user_ll samples % 37408 65.1412 vmlinux __copy_from_user_ll 23 0.1103 vmlinux __copy_user_zeroing_intel_nocache 23/37408=0.061% (99.94% reduction) Top 5 of 2.6.12.4.nt Counted GLOBAL_POWER_EVENTS events (time during which processor is not stopped) with a unit mask of 0x01 (mandatory) count 100000 samples % app name symbol name 128392 8.0274 vmlinux __copy_user_zeroing_intel_nocache 64206 4.0143 vmlinux journal_add_journal_head 59746 3.7355 vmlinux do_get_write_access 47674 2.9807 vmlinux journal_put_journal_head 46021 2.8774 vmlinux journal_dirty_metadata pattern9-0-cpu4-0-09011728/summary.out Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with a unit mask of 0x3f (multiple flags) count 3000 samples % app name symbol name 69755 4.2861 vmlinux __copy_user_zeroing_intel_nocache 55685 3.4215 vmlinux journal_add_journal_head 52371 3.2179 vmlinux __find_get_block 45504 2.7960 vmlinux journal_put_journal_head 36005 2.2123 vmlinux journal_stop pattern9-0-cpu4-0-09011744/summary.out Counted BSQ_CACHE_REFERENCE events (cache references seen by the bus unit) with a unit mask of 0x200 (read 3rd level cache miss) count 3000 samples % app name symbol name 1147 5.4994 vmlinux journal_add_journal_head 881 4.2240 vmlinux journal_dirty_data 872 4.1809 vmlinux blk_rq_map_sg 734 3.5192 vmlinux journal_commit_transaction 617 2.9582 vmlinux radix_tree_delete pattern9-0-cpu4-0-09011731/summary.out iozone results are original 2.6.12.4 CPU time = 207.768 sec cache aware CPU time = 184.783 sec (three times run) 184.783/207.768=88.94% (11.06% reduction) original: pattern9-0-cpu4-0-08191720/iozone.out: CPU Utilization: Wall time 45.997 CPU time 64.527 CPU utilization 140.28 % pattern9-0-cpu4-0-08191741/iozone.out: CPU Utilization: Wall time 46.878 CPU time 71.933 CPU utilization 153.45 % pattern9-0-cpu4-0-08191743/iozone.out: CPU Utilization: Wall time 45.152 CPU time 71.308 CPU utilization 157.93 % cache awre: pattern9-0-cpu4-0-09011728/iozone.out: CPU Utilization: Wall time 44.842 CPU time 62.465 CPU utilization 139.30 % pattern9-0-cpu4-0-09011731/iozone.out: CPU Utilization: Wall time 44.718 CPU time 59.273 CPU utilization 132.55 % pattern9-0-cpu4-0-09011744/iozone.out: CPU Utilization: Wall time 44.367 CPU time 63.045 CPU utilization 142.10 % Signed-off-by: Hiro Yoshioka <hyoshiok@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:04:16 +08:00
#include <linux/uaccess.h>
#include <linux/capability.h>
#include <linux/kernel_stat.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/uio.h>
#include <linux/error-injection.h>
#include <linux/hash.h>
#include <linux/writeback.h>
#include <linux/backing-dev.h>
#include <linux/pagevec.h>
#include <linux/blkdev.h>
#include <linux/security.h>
#include <linux/cpuset.h>
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
#include <linux/hugetlb.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 16:13:53 +08:00
#include <linux/memcontrol.h>
#include <linux/cleancache.h>
mm, truncate: do not check mapping for every page being truncated During truncation, the mapping has already been checked for shmem and dax so it's known that workingset_update_node is required. This patch avoids the checks on mapping for each page being truncated. In all other cases, a lookup helper is used to determine if workingset_update_node() needs to be called. The one danger is that the API is slightly harder to use as calling workingset_update_node directly without checking for dax or shmem mappings could lead to surprises. However, the API rarely needs to be used and hopefully the comment is enough to give people the hint. sparsetruncate (tiny) 4.14.0-rc4 4.14.0-rc4 oneirq-v1r1 pickhelper-v1r1 Min Time 141.00 ( 0.00%) 140.00 ( 0.71%) 1st-qrtle Time 142.00 ( 0.00%) 141.00 ( 0.70%) 2nd-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 3rd-qrtle Time 143.00 ( 0.00%) 143.00 ( 0.00%) Max-90% Time 144.00 ( 0.00%) 144.00 ( 0.00%) Max-95% Time 147.00 ( 0.00%) 145.00 ( 1.36%) Max-99% Time 195.00 ( 0.00%) 191.00 ( 2.05%) Max Time 230.00 ( 0.00%) 205.00 ( 10.87%) Amean Time 144.37 ( 0.00%) 143.82 ( 0.38%) Stddev Time 10.44 ( 0.00%) 9.00 ( 13.74%) Coeff Time 7.23 ( 0.00%) 6.26 ( 13.41%) Best99%Amean Time 143.72 ( 0.00%) 143.34 ( 0.26%) Best95%Amean Time 142.37 ( 0.00%) 142.00 ( 0.26%) Best90%Amean Time 142.19 ( 0.00%) 141.85 ( 0.24%) Best75%Amean Time 141.92 ( 0.00%) 141.58 ( 0.24%) Best50%Amean Time 141.69 ( 0.00%) 141.31 ( 0.27%) Best25%Amean Time 141.38 ( 0.00%) 140.97 ( 0.29%) As you'd expect, the gain is marginal but it can be detected. The differences in bonnie are all within the noise which is not surprising given the impact on the microbenchmark. radix_tree_update_node_t is a callback for some radix operations that optionally passes in a private field. The only user of the callback is workingset_update_node and as it no longer requires a mapping, the private field is removed. Link: http://lkml.kernel.org/r/20171018075952.10627-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:37:41 +08:00
#include <linux/shmem_fs.h>
#include <linux/rmap.h>
delayacct: track delays from thrashing cache pages Delay accounting already measures the time a task spends in direct reclaim and waiting for swapin, but in low memory situations tasks spend can spend a significant amount of their time waiting on thrashing page cache. This isn't tracked right now. To know the full impact of memory contention on an individual task, measure the delay when waiting for a recently evicted active cache page to read back into memory. Also update tools/accounting/getdelays.c: [hannes@computer accounting]$ sudo ./getdelays -d -p 1 print delayacct stats ON PID 1 CPU count real total virtual total delay total delay average 50318 745000000 847346785 400533713 0.008ms IO count delay total delay average 435 122601218 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 19 12621439 0ms Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:08 +08:00
#include <linux/delayacct.h>
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
#include <linux/psi.h>
#include <linux/ramfs.h>
#include "internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/filemap.h>
/*
* FIXME: remove all knowledge of the buffer layer from the core VM
*/
#include <linux/buffer_head.h> /* for try_to_free_buffers */
#include <asm/mman.h>
/*
* Shared mappings implemented 30.11.1994. It's not fully working yet,
* though.
*
* Shared mappings now work. 15.8.1995 Bruno.
*
* finished 'unifying' the page and buffer cache and SMP-threaded the
* page-cache, 21.05.1999, Ingo Molnar <mingo@redhat.com>
*
* SMP-threaded pagemap-LRU 1999, Andrea Arcangeli <andrea@suse.de>
*/
/*
* Lock ordering:
*
* ->i_mmap_rwsem (truncate_pagecache)
* ->private_lock (__free_pte->__set_page_dirty_buffers)
* ->swap_lock (exclusive_swap_page, others)
* ->i_pages lock
*
* ->i_mutex
* ->i_mmap_rwsem (truncate->unmap_mapping_range)
*
* ->mmap_sem
* ->i_mmap_rwsem
* ->page_table_lock or pte_lock (various, mainly in memory.c)
* ->i_pages lock (arch-dependent flush_dcache_mmap_lock)
*
* ->mmap_sem
* ->lock_page (access_process_vm)
*
* ->i_mutex (generic_perform_write)
* ->mmap_sem (fault_in_pages_readable->do_page_fault)
*
writeback: split inode_wb_list_lock into bdi_writeback.list_lock Split the global inode_wb_list_lock into a per-bdi_writeback list_lock, as it's currently the most contended lock in the system for metadata heavy workloads. It won't help for single-filesystem workloads for which we'll need the I/O-less balance_dirty_pages, but at least we can dedicate a cpu to spinning on each bdi now for larger systems. Based on earlier patches from Nick Piggin and Dave Chinner. It reduces lock contentions to 1/4 in this test case: 10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram lock_stat version 0.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- vanilla 2.6.39-rc3: inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23 ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 34 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 12893 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 10702 [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 19 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 5550 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 8511 [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157 2.6.39-rc3 + patch: &(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37 ------------------------ &(&wb->list_lock)->rlock 10 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 1493 [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150 &(&wb->list_lock)->rlock 3652 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f &(&wb->list_lock)->rlock 1412 [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223 ------------------------ &(&wb->list_lock)->rlock 3 [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b &(&wb->list_lock)->rlock 6 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 2061 [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf &(&wb->list_lock)->rlock 2629 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-04-22 08:19:44 +08:00
* bdi->wb.list_lock
* sb_lock (fs/fs-writeback.c)
* ->i_pages lock (__sync_single_inode)
*
* ->i_mmap_rwsem
* ->anon_vma.lock (vma_adjust)
*
* ->anon_vma.lock
* ->page_table_lock or pte_lock (anon_vma_prepare and various)
*
* ->page_table_lock or pte_lock
* ->swap_lock (try_to_unmap_one)
* ->private_lock (try_to_unmap_one)
* ->i_pages lock (try_to_unmap_one)
* ->pgdat->lru_lock (follow_page->mark_page_accessed)
* ->pgdat->lru_lock (check_pte_range->isolate_lru_page)
* ->private_lock (page_remove_rmap->set_page_dirty)
* ->i_pages lock (page_remove_rmap->set_page_dirty)
writeback: split inode_wb_list_lock into bdi_writeback.list_lock Split the global inode_wb_list_lock into a per-bdi_writeback list_lock, as it's currently the most contended lock in the system for metadata heavy workloads. It won't help for single-filesystem workloads for which we'll need the I/O-less balance_dirty_pages, but at least we can dedicate a cpu to spinning on each bdi now for larger systems. Based on earlier patches from Nick Piggin and Dave Chinner. It reduces lock contentions to 1/4 in this test case: 10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram lock_stat version 0.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- vanilla 2.6.39-rc3: inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23 ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 34 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 12893 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 10702 [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 19 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 5550 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 8511 [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157 2.6.39-rc3 + patch: &(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37 ------------------------ &(&wb->list_lock)->rlock 10 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 1493 [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150 &(&wb->list_lock)->rlock 3652 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f &(&wb->list_lock)->rlock 1412 [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223 ------------------------ &(&wb->list_lock)->rlock 3 [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b &(&wb->list_lock)->rlock 6 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 2061 [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf &(&wb->list_lock)->rlock 2629 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-04-22 08:19:44 +08:00
* bdi.wb->list_lock (page_remove_rmap->set_page_dirty)
* ->inode->i_lock (page_remove_rmap->set_page_dirty)
* ->memcg->move_lock (page_remove_rmap->lock_page_memcg)
writeback: split inode_wb_list_lock into bdi_writeback.list_lock Split the global inode_wb_list_lock into a per-bdi_writeback list_lock, as it's currently the most contended lock in the system for metadata heavy workloads. It won't help for single-filesystem workloads for which we'll need the I/O-less balance_dirty_pages, but at least we can dedicate a cpu to spinning on each bdi now for larger systems. Based on earlier patches from Nick Piggin and Dave Chinner. It reduces lock contentions to 1/4 in this test case: 10 HDD JBOD, 100 dd on each disk, XFS, 6GB ram lock_stat version 0.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- class name con-bounces contentions waittime-min waittime-max waittime-total acq-bounces acquisitions holdtime-min holdtime-max holdtime-total ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- vanilla 2.6.39-rc3: inode_wb_list_lock: 42590 44433 0.12 147.74 144127.35 252274 886792 0.08 121.34 917211.23 ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 34 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 12893 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 10702 [<ffffffff8115afef>] writeback_single_inode+0x16d/0x20a ------------------ inode_wb_list_lock 2 [<ffffffff81165da5>] bdev_inode_switch_bdi+0x29/0x85 inode_wb_list_lock 19 [<ffffffff8115bd0b>] inode_wb_list_del+0x22/0x49 inode_wb_list_lock 5550 [<ffffffff8115bb53>] __mark_inode_dirty+0x170/0x1d0 inode_wb_list_lock 8511 [<ffffffff8115b4ad>] writeback_sb_inodes+0x10f/0x157 2.6.39-rc3 + patch: &(&wb->list_lock)->rlock: 11383 11657 0.14 151.69 40429.51 90825 527918 0.11 145.90 556843.37 ------------------------ &(&wb->list_lock)->rlock 10 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 1493 [<ffffffff8115b1ed>] writeback_inodes_wb+0x3d/0x150 &(&wb->list_lock)->rlock 3652 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f &(&wb->list_lock)->rlock 1412 [<ffffffff8115a38e>] writeback_single_inode+0x17f/0x223 ------------------------ &(&wb->list_lock)->rlock 3 [<ffffffff8110b5af>] bdi_lock_two+0x46/0x4b &(&wb->list_lock)->rlock 6 [<ffffffff8115b189>] inode_wb_list_del+0x5f/0x86 &(&wb->list_lock)->rlock 2061 [<ffffffff8115af97>] __mark_inode_dirty+0x173/0x1cf &(&wb->list_lock)->rlock 2629 [<ffffffff8115a8e9>] writeback_sb_inodes+0x123/0x16f hughd@google.com: fix recursive lock when bdi_lock_two() is called with new the same as old akpm@linux-foundation.org: cleanup bdev_inode_switch_bdi() comment Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-04-22 08:19:44 +08:00
* bdi.wb->list_lock (zap_pte_range->set_page_dirty)
* ->inode->i_lock (zap_pte_range->set_page_dirty)
* ->private_lock (zap_pte_range->__set_page_dirty_buffers)
*
* ->i_mmap_rwsem
* ->tasklist_lock (memory_failure, collect_procs_ao)
*/
static void page_cache_delete(struct address_space *mapping,
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:49 +08:00
struct page *page, void *shadow)
{
XA_STATE(xas, &mapping->i_pages, page->index);
unsigned int nr = 1;
mapping_set_update(&xas, mapping);
/* hugetlb pages are represented by a single entry in the xarray */
if (!PageHuge(page)) {
xas_set_order(&xas, page->index, compound_order(page));
nr = compound_nr(page);
}
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:49 +08:00
VM_BUG_ON_PAGE(!PageLocked(page), page);
VM_BUG_ON_PAGE(PageTail(page), page);
VM_BUG_ON_PAGE(nr != 1 && shadow, page);
mm: keep page cache radix tree nodes in check Previously, page cache radix tree nodes were freed after reclaim emptied out their page pointers. But now reclaim stores shadow entries in their place, which are only reclaimed when the inodes themselves are reclaimed. This is problematic for bigger files that are still in use after they have a significant amount of their cache reclaimed, without any of those pages actually refaulting. The shadow entries will just sit there and waste memory. In the worst case, the shadow entries will accumulate until the machine runs out of memory. To get this under control, the VM will track radix tree nodes exclusively containing shadow entries on a per-NUMA node list. Per-NUMA rather than global because we expect the radix tree nodes themselves to be allocated node-locally and we want to reduce cross-node references of otherwise independent cache workloads. A simple shrinker will then reclaim these nodes on memory pressure. A few things need to be stored in the radix tree node to implement the shadow node LRU and allow tree deletions coming from the list: 1. There is no index available that would describe the reverse path from the node up to the tree root, which is needed to perform a deletion. To solve this, encode in each node its offset inside the parent. This can be stored in the unused upper bits of the same member that stores the node's height at no extra space cost. 2. The number of shadow entries needs to be counted in addition to the regular entries, to quickly detect when the node is ready to go to the shadow node LRU list. The current entry count is an unsigned int but the maximum number of entries is 64, so a shadow counter can easily be stored in the unused upper bits. 3. Tree modification needs tree lock and tree root, which are located in the address space, so store an address_space backpointer in the node. The parent pointer of the node is in a union with the 2-word rcu_head, so the backpointer comes at no extra cost as well. 4. The node needs to be linked to an LRU list, which requires a list head inside the node. This does increase the size of the node, but it does not change the number of objects that fit into a slab page. [akpm@linux-foundation.org: export the right function] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:56 +08:00
xas_store(&xas, shadow);
xas_init_marks(&xas);
mm: filemap: don't plant shadow entries without radix tree node When the underflow checks were added to workingset_node_shadow_dec(), they triggered immediately: kernel BUG at ./include/linux/swap.h:276! invalid opcode: 0000 [#1] SMP Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6 soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 task: ffff8faa93ecd940 task.stack: ffff8faa7f478000 RIP: page_cache_tree_insert+0xf1/0x100 Call Trace: __add_to_page_cache_locked+0x12e/0x270 add_to_page_cache_lru+0x4e/0xe0 mpage_readpages+0x112/0x1d0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1ad/0x290 force_page_cache_readahead+0xaa/0x100 page_cache_sync_readahead+0x3f/0x50 generic_file_read_iter+0x5af/0x740 blkdev_read_iter+0x35/0x40 __vfs_read+0xe1/0x130 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x13/0x8f Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00 RIP page_cache_tree_insert+0xf1/0x100 This is a long-standing bug in the way shadow entries are accounted in the radix tree nodes. The shrinker needs to know when radix tree nodes contain only shadow entries, no pages, so node->count is split in half to count shadows in the upper bits and pages in the lower bits. Unfortunately, the radix tree implementation doesn't know of this and assumes all entries are in node->count. When there is a shadow entry directly in root->rnode and the tree is later extended, the radix tree implementation will copy that entry into the new node and and bump its node->count, i.e. increases the page count bits. Once the shadow gets removed and we subtract from the upper counter, node->count underflows and triggers the warning. Afterwards, without node->count reaching 0 again, the radix tree node is leaked. Limit shadow entries to when we have actual radix tree nodes and can count them properly. That means we lose the ability to detect refaults from files that had only the first page faulted in at eviction time. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 04:02:08 +08:00
page->mapping = NULL;
/* Leave page->index set: truncation lookup relies upon it */
mm: filemap: don't plant shadow entries without radix tree node When the underflow checks were added to workingset_node_shadow_dec(), they triggered immediately: kernel BUG at ./include/linux/swap.h:276! invalid opcode: 0000 [#1] SMP Modules linked in: isofs usb_storage fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun nf_conntrack_netbios_ns nf_conntrack_broadcast ip6t_REJECT nf_reject_ipv6 soundcore wmi acpi_als pinctrl_sunrisepoint kfifo_buf tpm_tis industrialio acpi_pad pinctrl_intel tpm_tis_core tpm nfsd auth_rpcgss nfs_acl lockd grace sunrpc dm_crypt CPU: 0 PID: 20929 Comm: blkid Not tainted 4.8.0-rc8-00087-gbe67d60ba944 #1 Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016 task: ffff8faa93ecd940 task.stack: ffff8faa7f478000 RIP: page_cache_tree_insert+0xf1/0x100 Call Trace: __add_to_page_cache_locked+0x12e/0x270 add_to_page_cache_lru+0x4e/0xe0 mpage_readpages+0x112/0x1d0 blkdev_readpages+0x1d/0x20 __do_page_cache_readahead+0x1ad/0x290 force_page_cache_readahead+0xaa/0x100 page_cache_sync_readahead+0x3f/0x50 generic_file_read_iter+0x5af/0x740 blkdev_read_iter+0x35/0x40 __vfs_read+0xe1/0x130 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x13/0x8f Code: 03 00 48 8b 5d d8 65 48 33 1c 25 28 00 00 00 44 89 e8 75 19 48 83 c4 18 5b 41 5c 41 5d 41 5e 5d c3 0f 0b 41 bd ef ff ff ff eb d7 <0f> 0b e8 88 68 ef ff 0f 1f 84 00 RIP page_cache_tree_insert+0xf1/0x100 This is a long-standing bug in the way shadow entries are accounted in the radix tree nodes. The shrinker needs to know when radix tree nodes contain only shadow entries, no pages, so node->count is split in half to count shadows in the upper bits and pages in the lower bits. Unfortunately, the radix tree implementation doesn't know of this and assumes all entries are in node->count. When there is a shadow entry directly in root->rnode and the tree is later extended, the radix tree implementation will copy that entry into the new node and and bump its node->count, i.e. increases the page count bits. Once the shadow gets removed and we subtract from the upper counter, node->count underflows and triggers the warning. Afterwards, without node->count reaching 0 again, the radix tree node is leaked. Limit shadow entries to when we have actual radix tree nodes and can count them properly. That means we lose the ability to detect refaults from files that had only the first page faulted in at eviction time. Fixes: 449dd6984d0e ("mm: keep page cache radix tree nodes in check") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-05 04:02:08 +08:00
if (shadow) {
mapping->nrexceptional += nr;
/*
* Make sure the nrexceptional update is committed before
* the nrpages update so that final truncate racing
* with reclaim does not see both counters 0 at the
* same time and miss a shadow entry.
*/
smp_wmb();
}
mapping->nrpages -= nr;
mm + fs: store shadow entries in page cache Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:49 +08:00
}
static void unaccount_page_cache_page(struct address_space *mapping,
struct page *page)
{
int nr;
/*
* if we're uptodate, flush out into the cleancache, otherwise
* invalidate any existing cleancache entries. We can't leave
* stale data around in the cleancache once our page is gone
*/
if (PageUptodate(page) && PageMappedToDisk(page))
cleancache_put_page(page);
else
cleancache_invalidate_page(mapping, page);
VM_BUG_ON_PAGE(PageTail(page), page);
mm: __delete_from_page_cache show Bad page if mapped Commit e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") changed the famous BUG_ON(page_mapped(page)) in __delete_from_page_cache() to VM_BUG_ON_PAGE(page_mapped(page)): which gives us more info when CONFIG_DEBUG_VM=y, but nothing at all when not. Although it has not usually been very helpul, being hit long after the error in question, we do need to know if it actually happens on users' systems; but reinstating a crash there is likely to be opposed :) In the non-debug case, pr_alert("BUG: Bad page cache") plus dump_page(), dump_stack(), add_taint() - I don't really believe LOCKDEP_NOW_UNRELIABLE, but that seems to be the standard procedure now. Move that, or the VM_BUG_ON_PAGE(), up before the deletion from tree: so that the unNULLified page->mapping gives a little more information. If the inode is being evicted (rather than truncated), it won't have any vmas left, so it's safe(ish) to assume that the raised mapcount is erroneous, and we can discount it from page_count to avoid leaking the page (I'm less worried by leaking the occasional 4kB, than losing a potential 2MB page with each 4kB page leaked). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-10 06:08:07 +08:00
VM_BUG_ON_PAGE(page_mapped(page), page);
if (!IS_ENABLED(CONFIG_DEBUG_VM) && unlikely(page_mapped(page))) {
int mapcount;
pr_alert("BUG: Bad page cache in process %s pfn:%05lx\n",
current->comm, page_to_pfn(page));
dump_page(page, "still mapped when deleted");
dump_stack();
add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE);
mapcount = page_mapcount(page);
if (mapping_exiting(mapping) &&
page_count(page) >= mapcount + 2) {
/*
* All vmas have already been torn down, so it's
* a good bet that actually the page is unmapped,
* and we'd prefer not to leak it: if we're wrong,
* some other bad page check should catch it later.
*/
page_mapcount_reset(page);
page_ref_sub(page, mapcount);
mm: __delete_from_page_cache show Bad page if mapped Commit e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages") changed the famous BUG_ON(page_mapped(page)) in __delete_from_page_cache() to VM_BUG_ON_PAGE(page_mapped(page)): which gives us more info when CONFIG_DEBUG_VM=y, but nothing at all when not. Although it has not usually been very helpul, being hit long after the error in question, we do need to know if it actually happens on users' systems; but reinstating a crash there is likely to be opposed :) In the non-debug case, pr_alert("BUG: Bad page cache") plus dump_page(), dump_stack(), add_taint() - I don't really believe LOCKDEP_NOW_UNRELIABLE, but that seems to be the standard procedure now. Move that, or the VM_BUG_ON_PAGE(), up before the deletion from tree: so that the unNULLified page->mapping gives a little more information. If the inode is being evicted (rather than truncated), it won't have any vmas left, so it's safe(ish) to assume that the raised mapcount is erroneous, and we can discount it from page_count to avoid leaking the page (I'm less worried by leaking the occasional 4kB, than losing a potential 2MB page with each 4kB page leaked). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-10 06:08:07 +08:00
}
}
hugetlb: do not account hugetlb pages as NR_FILE_PAGES hugetlb pages uses add_to_page_cache to track shared mappings. This is OK from the data structure point of view but it is less so from the NR_FILE_PAGES accounting: - huge pages are accounted as 4k which is clearly wrong - this counter is used as the amount of the reclaimable page cache which is incorrect as well because hugetlb pages are special and not reclaimable - the counter is then exported to userspace via /proc/meminfo (in Cached:), /proc/vmstat and /proc/zoneinfo as nr_file_pages which is confusing at least: Cached: 8883504 kB HugePages_Free: 8348 ... Cached: 8916048 kB HugePages_Free: 156 ... thats 8192 huge pages allocated which is ~16G accounted as 32M There are usually not that many huge pages in the system for this to make any visible difference e.g. by fooling __vm_enough_memory or zone_pagecache_reclaimable. Fix this by special casing huge pages in both __delete_from_page_cache and __add_to_page_cache_locked. replace_page_cache_page is currently only used by fuse and that shouldn't touch hugetlb pages AFAICS but it is more robust to check for special casing there as well. Hugetlb pages shouldn't get to any other paths where we do accounting: - migration - we have a special handling via hugetlbfs_migrate_page - shmem - doesn't handle hugetlb pages directly even for SHM_HUGETLB resp. MAP_HUGETLB - swapcache - hugetlb is not swapable This has a user visible effect but I believe it is reasonable because the previously exported number is simply bogus. An alternative would be to account hugetlb pages with their real size and treat them similar to shmem. But this has some drawbacks. First we would have to special case in kernel users of NR_FILE_PAGES and considering how hugetlb is special we would have to do it everywhere. We do not want Cached exported by /proc/meminfo to include it because the value would be even more misleading. __vm_enough_memory and zone_pagecache_reclaimable would have to do the same thing because those pages are simply not reclaimable. The correction is even not trivial because we would have to consider all active hugetlb page sizes properly. Users of the counter outside of the kernel would have to do the same. So the question is why to account something that needs to be basically excluded for each reasonable usage. This doesn't make much sense to me. It seems that this has been broken since hugetlb was introduced but I haven't checked the whole history. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:57:24 +08:00
/* hugetlb pages do not participate in page cache accounting. */
if (PageHuge(page))
return;
nr = hpage_nr_pages(page);
__mod_node_page_state(page_pgdat(page), NR_FILE_PAGES, -nr);
if (PageSwapBacked(page)) {
__mod_node_page_state(page_pgdat(page), NR_SHMEM, -nr);
if (PageTransHuge(page))
__dec_node_page_state(page, NR_SHMEM_THPS);
mm,thp: add read-only THP support for (non-shmem) FS This patch is (hopefully) the first step to enable THP for non-shmem filesystems. This patch enables an application to put part of its text sections to THP via madvise, for example: madvise((void *)0x600000, 0x200000, MADV_HUGEPAGE); We tried to reuse the logic for THP on tmpfs. Currently, write is not supported for non-shmem THP. khugepaged will only process vma with VM_DENYWRITE. sys_mmap() ignores VM_DENYWRITE requests (see ksys_mmap_pgoff). The only way to create vma with VM_DENYWRITE is execve(). This requirement limits non-shmem THP to text sections. The next patch will handle writes, which would only happen when the all the vmas with VM_DENYWRITE are unmapped. An EXPERIMENTAL config, READ_ONLY_THP_FOR_FS, is added to gate this feature. [songliubraving@fb.com: fix build without CONFIG_SHMEM] Link: http://lkml.kernel.org/r/F53407FB-96CC-42E8-9862-105C92CC2B98@fb.com [songliubraving@fb.com: fix double unlock in collapse_file()] Link: http://lkml.kernel.org/r/B960CBFA-8EFC-4DA4-ABC5-1977FFF2CA57@fb.com Link: http://lkml.kernel.org/r/20190801184244.3169074-7-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:38:00 +08:00
} else if (PageTransHuge(page)) {
__dec_node_page_state(page, NR_FILE_THPS);
filemap_nr_thps_dec(mapping);
}
/*
* At this point page must be either written or cleaned by
* truncate. Dirty page here signals a bug and loss of
* unwritten data.
*
* This fixes dirty accounting after removing the page entirely
* but leaves PageDirty set: it has no effect for truncated
* page and anyway will be cleared before returning page into
* buddy allocator.
*/
if (WARN_ON_ONCE(PageDirty(page)))
account_page_cleaned(page, mapping, inode_to_wb(mapping->host));
}
/*
* Delete a page from the page cache and free it. Caller has to make
* sure the page is locked and that nobody else uses it - or that usage
* is safe. The caller must hold the i_pages lock.
*/
void __delete_from_page_cache(struct page *page, void *shadow)
{
struct address_space *mapping = page->mapping;
trace_mm_filemap_delete_from_page_cache(page);
unaccount_page_cache_page(mapping, page);
page_cache_delete(mapping, page, shadow);
}
static void page_cache_free_page(struct address_space *mapping,
struct page *page)
{
void (*freepage)(struct page *);
freepage = mapping->a_ops->freepage;
if (freepage)
freepage(page);
if (PageTransHuge(page) && !PageHuge(page)) {
page_ref_sub(page, HPAGE_PMD_NR);
VM_BUG_ON_PAGE(page_count(page) <= 0, page);
} else {
put_page(page);
}
}
/**
* delete_from_page_cache - delete page from page cache
* @page: the page which the kernel is trying to remove from page cache
*
* This must be called only on pages that have been verified to be in the page
* cache and locked. It will never put the page into the free list, the caller
* has a reference on the page.
*/
void delete_from_page_cache(struct page *page)
{
struct address_space *mapping = page_mapping(page);
memcg: add per cgroup dirty page accounting When modifying PG_Dirty on cached file pages, update the new MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where global NR_FILE_DIRTY is managed. The new memcg stat is visible in the per memcg memory.stat cgroupfs file. The most recent past attempt at this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632 The new accounting supports future efforts to add per cgroup dirty page throttling and writeback. It also helps an administrator break down a container's memory usage and provides evidence to understand memcg oom kills (the new dirty count is included in memcg oom kill messages). The ability to move page accounting between memcg (memory.move_charge_at_immigrate) makes this accounting more complicated than the global counter. The existing mem_cgroup_{begin,end}_page_stat() lock is used to serialize move accounting with stat updates. Typical update operation: memcg = mem_cgroup_begin_page_stat(page) if (TestSetPageDirty()) { [...] mem_cgroup_update_page_stat(memcg) } mem_cgroup_end_page_stat(memcg) Summary of mem_cgroup_end_page_stat() overhead: - Without CONFIG_MEMCG it's a no-op - With CONFIG_MEMCG and no inter memcg task movement, it's just rcu_read_lock() - With CONFIG_MEMCG and inter memcg task movement, it's rcu_read_lock() + spin_lock_irqsave() A memcg parameter is added to several routines because their callers now grab mem_cgroup_begin_page_stat() which returns the memcg later needed by for mem_cgroup_update_page_stat(). Because mem_cgroup_begin_page_stat() may disable interrupts, some adjustments are needed: - move __mark_inode_dirty() from __set_page_dirty() to its caller. __mark_inode_dirty() locking does not want interrupts disabled. - use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in __delete_from_page_cache(), replace_page_cache_page(), invalidate_complete_page2(), and __remove_mapping(). text data bss dec hex filename 8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before 8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after +192 text bytes 8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before 8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after +773 text bytes Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for all metrics, they're all wall clock or cycle counts. The read and write fault benchmarks just measure fault time, they do not include I/O time. * CONFIG_MEMCG not set: baseline patched kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples) dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03% dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99% dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77% read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples) write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples) * CONFIG_MEMCG=y root_memcg: baseline patched kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples) dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90% dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33% dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00% read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples) write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples) * CONFIG_MEMCG=y non-root_memcg: baseline patched kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples) dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82% dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27% dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52% read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples) write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples) As expected anon page faults are not affected by this patch. tj: Updated to apply on top of the recent cancel_dirty_page() changes. Signed-off-by: Sha Zhengju <handai.szj@gmail.com> Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:13:16 +08:00
unsigned long flags;
BUG_ON(!PageLocked(page));
xa_lock_irqsave(&mapping->i_pages, flags);
__delete_from_page_cache(page, NULL);
xa_unlock_irqrestore(&mapping->i_pages, flags);
page_cache_free_page(mapping, page);
mm: introduce delete_from_page_cache() Presently we increase the page refcount in add_to_page_cache() but don't decrease it in remove_from_page_cache(). Such asymmetry adds confusion, requiring that callers notice it and a comment explaining why they release a page reference. It's not a good API. A long time ago, Hugh tried it (http://lkml.org/lkml/2004/10/24/140) but gave up because reiser4's drop_page() had to unlock the page between removing it from page cache and doing the page_cache_release(). But now the situation is changed. I think at least things in current mainline don't have any obstacles. The problem is for out-of-mainline filesystems - if they have done such things as reiser4, this patch could be a problem but they will discover this at compile time since we remove remove_from_page_cache(). This patch: This function works as just wrapper remove_from_page_cache(). The difference is that it decreases page references in itself. So caller have to make sure it has a page reference before calling. This patch is ready for removing remove_from_page_cache(). Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Edward Shishkin <edward.shishkin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 07:30:53 +08:00
}
EXPORT_SYMBOL(delete_from_page_cache);
/*
* page_cache_delete_batch - delete several pages from page cache
* @mapping: the mapping to which pages belong
* @pvec: pagevec with pages to delete
*
* The function walks over mapping->i_pages and removes pages passed in @pvec
* from the mapping. The function expects @pvec to be sorted by page index
* and is optimised for it to be dense.
* It tolerates holes in @pvec (mapping entries at those indices are not
* modified). The function expects only THP head pages to be present in the
* @pvec.
*
* The function expects the i_pages lock to be held.
*/
static void page_cache_delete_batch(struct address_space *mapping,
struct pagevec *pvec)
{
XA_STATE(xas, &mapping->i_pages, pvec->pages[0]->index);
int total_pages = 0;
int i = 0;
struct page *page;
mapping_set_update(&xas, mapping);
xas_for_each(&xas, page, ULONG_MAX) {
if (i >= pagevec_count(pvec))
break;
/* A swap/dax/shadow entry got inserted? Skip it. */
if (xa_is_value(page))
continue;
/*
* A page got inserted in our range? Skip it. We have our
* pages locked so they are protected from being removed.
* If we see a page whose index is higher than ours, it
* means our page has been removed, which shouldn't be
* possible because we're holding the PageLock.
*/
if (page != pvec->pages[i]) {
VM_BUG_ON_PAGE(page->index > pvec->pages[i]->index,
page);
continue;
}
WARN_ON_ONCE(!PageLocked(page));
if (page->index == xas.xa_index)
page->mapping = NULL;
/* Leave page->index set: truncation lookup relies on it */
/*
* Move to the next page in the vector if this is a regular
* page or the index is of the last sub-page of this compound
* page.
*/
if (page->index + compound_nr(page) - 1 == xas.xa_index)
i++;
xas_store(&xas, NULL);
total_pages++;
}
mapping->nrpages -= total_pages;
}
void delete_from_page_cache_batch(struct address_space *mapping,
struct pagevec *pvec)
{
int i;
unsigned long flags;
if (!pagevec_count(pvec))
return;
xa_lock_irqsave(&mapping->i_pages, flags);
for (i = 0; i < pagevec_count(pvec); i++) {
trace_mm_filemap_delete_from_page_cache(pvec->pages[i]);
unaccount_page_cache_page(mapping, pvec->pages[i]);
}
page_cache_delete_batch(mapping, pvec);
xa_unlock_irqrestore(&mapping->i_pages, flags);
for (i = 0; i < pagevec_count(pvec); i++)
page_cache_free_page(mapping, pvec->pages[i]);
}
int filemap_check_errors(struct address_space *mapping)
{
int ret = 0;
/* Check for outstanding write errors */
if (test_bit(AS_ENOSPC, &mapping->flags) &&
test_and_clear_bit(AS_ENOSPC, &mapping->flags))
ret = -ENOSPC;
if (test_bit(AS_EIO, &mapping->flags) &&
test_and_clear_bit(AS_EIO, &mapping->flags))
ret = -EIO;
return ret;
}
EXPORT_SYMBOL(filemap_check_errors);
static int filemap_check_and_keep_errors(struct address_space *mapping)
{
/* Check for outstanding write errors */
if (test_bit(AS_EIO, &mapping->flags))
return -EIO;
if (test_bit(AS_ENOSPC, &mapping->flags))
return -ENOSPC;
return 0;
}
/**
* __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
* @mapping: address space structure to write
* @start: offset in bytes where the range starts
* @end: offset in bytes where the range ends (inclusive)
* @sync_mode: enable synchronous operation
*
* Start writeback against all of a mapping's dirty pages that lie
* within the byte offsets <start, end> inclusive.
*
* If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
* opposed to a regular memory cleansing writeback. The difference between
* these two operations is that if a dirty page/buffer is encountered, it must
* be waited upon, and not just skipped over.
*
* Return: %0 on success, negative error code otherwise.
*/
[PATCH] fadvise(): write commands Add two new linux-specific fadvise extensions(): LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file offsets `offset' and `offset+len'. Any pages which are currently under writeout are skipped, whether or not they are dirty. LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file offsets `offset' and `offset+len'. By combining these two operations the application may do several things: LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push all of the currently dirty pages at the disk, wait until they have been written. It should be noted that none of these operations write out the file's metadata. So unless the application is strictly performing overwrites of already-instantiated disk blocks, there are no guarantees here that the data will be available after a crash. To complete this suite of operations I guess we should have a "sync file metadata only" operation. This gives applications access to all the building blocks needed for all sorts of sync operations. But sync-metadata doesn't fit well with the fadvise() interface. Probably it should be a new syscall: sys_fmetadatasync(). The patch also diddles with the meaning of `endbyte' in sys_fadvise64_64(). It is made to represent that last affected byte in the file (ie: it is inclusive). Generally, all these byterange and pagerange functions are inclusive so we can easily represent EOF with -1. As Ulrich notes, these two functions are somewhat abusive of the fadvise() concept, which appears to be "set the future policy for this fd". But these commands are a perfect fit with the fadvise() impementation, and several of the existing fadvise() commands are synchronous and don't affect future policy either. I think we can live with the slight incongruity. Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:18:04 +08:00
int __filemap_fdatawrite_range(struct address_space *mapping, loff_t start,
loff_t end, int sync_mode)
{
int ret;
struct writeback_control wbc = {
.sync_mode = sync_mode,
mm: write_cache_pages integrity fix In write_cache_pages, nr_to_write is heeded even for data-integrity syncs, so the function will return success after writing out nr_to_write pages, even if that was not sufficient to guarantee data integrity. The callers tend to set it to values that could break data interity semantics easily in practice. For example, nr_to_write can be set to mapping->nr_pages * 2, however if a file has a single, dirty page, then fsync is called, subsequent pages might be concurrently added and dirtied, then write_cache_pages might writeout two of these newly dirty pages, while not writing out the old page that should have been written out. Fix this by ignoring nr_to_write if it is a data integrity sync. This is a data integrity bug. The reason this has been done in the past is to avoid stalling sync operations behind page dirtiers. "If a file has one dirty page at offset 1000000000000000 then someone does an fsync() and someone else gets in first and starts madly writing pages at offset 0, we want to write that page at 1000000000000000. Somehow." What we do today is return success after an arbitrary amount of pages are written, whether or not we have provided the data-integrity semantics that the caller has asked for. Even this doesn't actually fix all stall cases completely: in the above situation, if the file has a huge number of pages in pagecache (but not dirty), then mapping->nrpages is going to be huge, even if pages are being dirtied. This change does indeed make the possibility of long stalls lager, and that's not a good thing, but lying about data integrity is even worse. We have to either perform the sync, or return -ELINUXISLAME so at least the caller knows what has happened. There are subsequent competing approaches in the works to solve the stall problems properly, without compromising data integrity. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 06:39:08 +08:00
.nr_to_write = LONG_MAX,
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:26 +08:00
.range_start = start,
.range_end = end,
};
if (!mapping_cap_writeback_dirty(mapping) ||
!mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
return 0;
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
wbc_attach_fdatawrite_inode(&wbc, mapping->host);
ret = do_writepages(mapping, &wbc);
writeback: make writeback_control track the inode being written back Currently, for cgroup writeback, the IO submission paths directly associate the bio's with the blkcg from inode_to_wb_blkcg_css(); however, it'd be necessary to keep more writeback context to implement foreign inode writeback detection. wbc (writeback_control) is the natural fit for the extra context - it persists throughout the writeback of each inode and is passed all the way down to IO submission paths. This patch adds wbc_attach_and_unlock_inode(), wbc_detach_inode(), and wbc_attach_fdatawrite_inode() which are used to associate wbc with the inode being written back. IO submission paths now use wbc_init_bio() instead of directly associating bio's with blkcg themselves. This leaves inode_to_wb_blkcg_css() w/o any user. The function is removed. wbc currently only tracks the associated wb (bdi_writeback). Future patches will add more for foreign inode detection. The association is established under i_lock which will be depended upon when migrating foreign inodes to other wb's. As currently, once established, inode to wb association never changes, going through wbc when initializing bio's doesn't cause any behavior changes. v2: submit_blk_blkcg() now checks whether the wbc is associated with a wb before dereferencing it. This can happen when pageout() is writing pages directly without going through the usual writeback path. As pageout() path is single-threaded, we don't want it to be blocked behind a slow cgroup and ultimately want it to delegate actual writing to the usual writeback path. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 22:39:48 +08:00
wbc_detach_inode(&wbc);
return ret;
}
static inline int __filemap_fdatawrite(struct address_space *mapping,
int sync_mode)
{
[PATCH] writeback: fix range handling When a writeback_control's `start' and `end' fields are used to indicate a one-byte-range starting at file offset zero, the required values of .start=0,.end=0 mean that the ->writepages() implementation has no way of telling that it is being asked to perform a range request. Because we're currently overloading (start == 0 && end == 0) to mean "this is not a write-a-range request". To make all this sane, the patch changes range of writeback_control. So caller does: If it is calling ->writepages() to write pages, it sets range (range_start/end or range_cyclic) always. And if range_cyclic is true, ->writepages() thinks the range is cyclic, otherwise it just uses range_start and range_end. This patch does, - Add LLONG_MAX, LLONG_MIN, ULLONG_MAX to include/linux/kernel.h -1 is usually ok for range_end (type is long long). But, if someone did, range_end += val; range_end is "val - 1" u64val = range_end >> bits; u64val is "~(0ULL)" or something, they are wrong. So, this adds LLONG_MAX to avoid nasty things, and uses LLONG_MAX for range_end. - All callers of ->writepages() sets range_start/end or range_cyclic. - Fix updates of ->writeback_index. It seems already bit strange. If it starts at 0 and ended by check of nr_to_write, this last index may reduce chance to scan end of file. So, this updates ->writeback_index only if range_cyclic is true or whole-file is scanned. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Nathan Scott <nathans@sgi.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Steven French <sfrench@us.ibm.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 17:03:26 +08:00
return __filemap_fdatawrite_range(mapping, 0, LLONG_MAX, sync_mode);
}
int filemap_fdatawrite(struct address_space *mapping)
{
return __filemap_fdatawrite(mapping, WB_SYNC_ALL);
}
EXPORT_SYMBOL(filemap_fdatawrite);
int filemap_fdatawrite_range(struct address_space *mapping, loff_t start,
[PATCH] fadvise(): write commands Add two new linux-specific fadvise extensions(): LINUX_FADV_ASYNC_WRITE: start async writeout of any dirty pages between file offsets `offset' and `offset+len'. Any pages which are currently under writeout are skipped, whether or not they are dirty. LINUX_FADV_WRITE_WAIT: wait upon writeout of any dirty pages between file offsets `offset' and `offset+len'. By combining these two operations the application may do several things: LINUX_FADV_ASYNC_WRITE: push some or all of the dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE: push all of the currently dirty pages at the disk. LINUX_FADV_WRITE_WAIT, LINUX_FADV_ASYNC_WRITE, LINUX_FADV_WRITE_WAIT: push all of the currently dirty pages at the disk, wait until they have been written. It should be noted that none of these operations write out the file's metadata. So unless the application is strictly performing overwrites of already-instantiated disk blocks, there are no guarantees here that the data will be available after a crash. To complete this suite of operations I guess we should have a "sync file metadata only" operation. This gives applications access to all the building blocks needed for all sorts of sync operations. But sync-metadata doesn't fit well with the fadvise() interface. Probably it should be a new syscall: sys_fmetadatasync(). The patch also diddles with the meaning of `endbyte' in sys_fadvise64_64(). It is made to represent that last affected byte in the file (ie: it is inclusive). Generally, all these byterange and pagerange functions are inclusive so we can easily represent EOF with -1. As Ulrich notes, these two functions are somewhat abusive of the fadvise() concept, which appears to be "set the future policy for this fd". But these commands are a perfect fit with the fadvise() impementation, and several of the existing fadvise() commands are synchronous and don't affect future policy either. I think we can live with the slight incongruity. Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 19:18:04 +08:00
loff_t end)
{
return __filemap_fdatawrite_range(mapping, start, end, WB_SYNC_ALL);
}
EXPORT_SYMBOL(filemap_fdatawrite_range);
/**
* filemap_flush - mostly a non-blocking flush
* @mapping: target address_space
*
* This is a mostly non-blocking flush. Not suitable for data-integrity
* purposes - I/O may not be started against all dirty pages.
*
* Return: %0 on success, negative error code otherwise.
*/
int filemap_flush(struct address_space *mapping)
{
return __filemap_fdatawrite(mapping, WB_SYNC_NONE);
}
EXPORT_SYMBOL(filemap_flush);
/**
* filemap_range_has_page - check if a page exists in range.
* @mapping: address space within which to check
* @start_byte: offset in bytes where the range starts
* @end_byte: offset in bytes where the range ends (inclusive)
*
* Find at least one page in the range supplied, usually used to check if
* direct writing in this range will trigger a writeback.
*
* Return: %true if at least one page exists in the specified range,
* %false otherwise.
*/
bool filemap_range_has_page(struct address_space *mapping,
loff_t start_byte, loff_t end_byte)
{
struct page *page;
XA_STATE(xas, &mapping->i_pages, start_byte >> PAGE_SHIFT);
pgoff_t max = end_byte >> PAGE_SHIFT;
if (end_byte < start_byte)
return false;
rcu_read_lock();
for (;;) {
page = xas_find(&xas, max);
if (xas_retry(&xas, page))
continue;
/* Shadow entries don't count */
if (xa_is_value(page))
continue;
/*
* We don't need to try to pin this page; we're about to
* release the RCU lock anyway. It is enough to know that
* there was a page here recently.
*/
break;
}
rcu_read_unlock();
return page != NULL;
}
EXPORT_SYMBOL(filemap_range_has_page);
static void __filemap_fdatawait_range(struct address_space *mapping,
loff_t start_byte, loff_t end_byte)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pgoff_t index = start_byte >> PAGE_SHIFT;
pgoff_t end = end_byte >> PAGE_SHIFT;
struct pagevec pvec;
int nr_pages;
if (end_byte < start_byte)
return;
pagevec_init(&pvec);
while (index <= end) {
unsigned i;
nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index,
end, PAGECACHE_TAG_WRITEBACK);
if (!nr_pages)
break;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
wait_on_page_writeback(page);
ClearPageError(page);
}
pagevec_release(&pvec);
cond_resched();
}
}
/**
* filemap_fdatawait_range - wait for writeback to complete
* @mapping: address space structure to wait for
* @start_byte: offset in bytes where the range starts
* @end_byte: offset in bytes where the range ends (inclusive)
*
* Walk the list of under-writeback pages of the given address space
* in the given range and wait for all of them. Check error status of
* the address space and return it.
*
* Since the error status of the address space is cleared by this function,
* callers are responsible for checking the return value and handling and/or
* reporting the error.
*
* Return: error status of the address space.
*/
int filemap_fdatawait_range(struct address_space *mapping, loff_t start_byte,
loff_t end_byte)
{
__filemap_fdatawait_range(mapping, start_byte, end_byte);
return filemap_check_errors(mapping);
}
EXPORT_SYMBOL(filemap_fdatawait_range);
/**
* filemap_fdatawait_range_keep_errors - wait for writeback to complete
* @mapping: address space structure to wait for
* @start_byte: offset in bytes where the range starts
* @end_byte: offset in bytes where the range ends (inclusive)
*
* Walk the list of under-writeback pages of the given address space in the
* given range and wait for all of them. Unlike filemap_fdatawait_range(),
* this function does not clear error status of the address space.
*
* Use this function if callers don't handle errors themselves. Expected
* call sites are system-wide / filesystem-wide data flushers: e.g. sync(2),
* fsfreeze(8)
*/
int filemap_fdatawait_range_keep_errors(struct address_space *mapping,
loff_t start_byte, loff_t end_byte)
{
__filemap_fdatawait_range(mapping, start_byte, end_byte);
return filemap_check_and_keep_errors(mapping);
}
EXPORT_SYMBOL(filemap_fdatawait_range_keep_errors);
/**
* file_fdatawait_range - wait for writeback to complete
* @file: file pointing to address space structure to wait for
* @start_byte: offset in bytes where the range starts
* @end_byte: offset in bytes where the range ends (inclusive)
*
* Walk the list of under-writeback pages of the address space that file
* refers to, in the given range and wait for all of them. Check error
* status of the address space vs. the file->f_wb_err cursor and return it.
*
* Since the error status of the file is advanced by this function,
* callers are responsible for checking the return value and handling and/or
* reporting the error.
*
* Return: error status of the address space vs. the file->f_wb_err cursor.
*/
int file_fdatawait_range(struct file *file, loff_t start_byte, loff_t end_byte)
{
struct address_space *mapping = file->f_mapping;
__filemap_fdatawait_range(mapping, start_byte, end_byte);
return file_check_and_advance_wb_err(file);
}
EXPORT_SYMBOL(file_fdatawait_range);
/**
* filemap_fdatawait_keep_errors - wait for writeback without clearing errors
* @mapping: address space structure to wait for
*
* Walk the list of under-writeback pages of the given address space
* and wait for all of them. Unlike filemap_fdatawait(), this function
* does not clear error status of the address space.
*
* Use this function if callers don't handle errors themselves. Expected
* call sites are system-wide / filesystem-wide data flushers: e.g. sync(2),
* fsfreeze(8)
*
* Return: error status of the address space.
*/
int filemap_fdatawait_keep_errors(struct address_space *mapping)
{
__filemap_fdatawait_range(mapping, 0, LLONG_MAX);
return filemap_check_and_keep_errors(mapping);
}
EXPORT_SYMBOL(filemap_fdatawait_keep_errors);
/* Returns true if writeback might be needed or already in progress. */
static bool mapping_needs_writeback(struct address_space *mapping)
{
if (dax_mapping(mapping))
return mapping->nrexceptional;
return mapping->nrpages;
}
/**
* filemap_write_and_wait_range - write out & wait on a file range
* @mapping: the address_space for the pages
* @lstart: offset in bytes where the range starts
* @lend: offset in bytes where the range ends (inclusive)
*
* Write out and wait upon file offsets lstart->lend, inclusive.
*
* Note that @lend is inclusive (describes the last byte to be written) so
* that this function can be used to write to the very end-of-file (end = -1).
*
* Return: error status of the address space.
*/
int filemap_write_and_wait_range(struct address_space *mapping,
loff_t lstart, loff_t lend)
{
int err = 0;
if (mapping_needs_writeback(mapping)) {
err = __filemap_fdatawrite_range(mapping, lstart, lend,
WB_SYNC_ALL);
/*
* Even if the above returned error, the pages may be
* written partially (e.g. -ENOSPC), so we wait for it.
* But the -EIO is special case, it may indicate the worst
* thing (e.g. bug) happened, so we avoid waiting for it.
*/
if (err != -EIO) {
int err2 = filemap_fdatawait_range(mapping,
lstart, lend);
if (!err)
err = err2;
} else {
/* Clear any previously stored errors */
filemap_check_errors(mapping);
}
} else {
err = filemap_check_errors(mapping);
}
return err;
}
EXPORT_SYMBOL(filemap_write_and_wait_range);
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
void __filemap_set_wb_err(struct address_space *mapping, int err)
{
errseq_t eseq = errseq_set(&mapping->wb_err, err);
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
trace_filemap_set_wb_err(mapping, eseq);
}
EXPORT_SYMBOL(__filemap_set_wb_err);
/**
* file_check_and_advance_wb_err - report wb error (if any) that was previously
* and advance wb_err to current one
* @file: struct file on which the error is being reported
*
* When userland calls fsync (or something like nfsd does the equivalent), we
* want to report any writeback errors that occurred since the last fsync (or
* since the file was opened if there haven't been any).
*
* Grab the wb_err from the mapping. If it matches what we have in the file,
* then just quickly return 0. The file is all caught up.
*
* If it doesn't match, then take the mapping value, set the "seen" flag in
* it and try to swap it into place. If it works, or another task beat us
* to it with the new value, then update the f_wb_err and return the error
* portion. The error at this point must be reported via proper channels
* (a'la fsync, or NFS COMMIT operation, etc.).
*
* While we handle mapping->wb_err with atomic operations, the f_wb_err
* value is protected by the f_lock since we must ensure that it reflects
* the latest value swapped in for this file descriptor.
*
* Return: %0 on success, negative error code otherwise.
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
*/
int file_check_and_advance_wb_err(struct file *file)
{
int err = 0;
errseq_t old = READ_ONCE(file->f_wb_err);
struct address_space *mapping = file->f_mapping;
/* Locklessly handle the common case where nothing has changed */
if (errseq_check(&mapping->wb_err, old)) {
/* Something changed, must use slow path */
spin_lock(&file->f_lock);
old = file->f_wb_err;
err = errseq_check_and_advance(&mapping->wb_err,
&file->f_wb_err);
trace_file_check_and_advance_wb_err(file, old);
spin_unlock(&file->f_lock);
}
/*
* We're mostly using this function as a drop in replacement for
* filemap_check_errors. Clear AS_EIO/AS_ENOSPC to emulate the effect
* that the legacy code would have had on these flags.
*/
clear_bit(AS_EIO, &mapping->flags);
clear_bit(AS_ENOSPC, &mapping->flags);
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
return err;
}
EXPORT_SYMBOL(file_check_and_advance_wb_err);
/**
* file_write_and_wait_range - write out & wait on a file range
* @file: file pointing to address_space with pages
* @lstart: offset in bytes where the range starts
* @lend: offset in bytes where the range ends (inclusive)
*
* Write out and wait upon file offsets lstart->lend, inclusive.
*
* Note that @lend is inclusive (describes the last byte to be written) so
* that this function can be used to write to the very end-of-file (end = -1).
*
* After writing out and waiting on the data, we check and advance the
* f_wb_err cursor to the latest value, and return any errors detected there.
*
* Return: %0 on success, negative error code otherwise.
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
*/
int file_write_and_wait_range(struct file *file, loff_t lstart, loff_t lend)
{
int err = 0, err2;
struct address_space *mapping = file->f_mapping;
if (mapping_needs_writeback(mapping)) {
fs: new infrastructure for writeback error handling and reporting Most filesystems currently use mapping_set_error and filemap_check_errors for setting and reporting/clearing writeback errors at the mapping level. filemap_check_errors is indirectly called from most of the filemap_fdatawait_* functions and from filemap_write_and_wait*. These functions are called from all sorts of contexts to wait on writeback to finish -- e.g. mostly in fsync, but also in truncate calls, getattr, etc. The non-fsync callers are problematic. We should be reporting writeback errors during fsync, but many places spread over the tree clear out errors before they can be properly reported, or report errors at nonsensical times. If I get -EIO on a stat() call, there is no reason for me to assume that it is because some previous writeback failed. The fact that it also clears out the error such that a subsequent fsync returns 0 is a bug, and a nasty one since that's potentially silent data corruption. This patch adds a small bit of new infrastructure for setting and reporting errors during address_space writeback. While the above was my original impetus for adding this, I think it's also the case that current fsync semantics are just problematic for userland. Most applications that call fsync do so to ensure that the data they wrote has hit the backing store. In the case where there are multiple writers to the file at the same time, this is really hard to determine. The first one to call fsync will see any stored error, and the rest get back 0. The processes with open fds may not be associated with one another in any way. They could even be in different containers, so ensuring coordination between all fsync callers is not really an option. One way to remedy this would be to track what file descriptor was used to dirty the file, but that's rather cumbersome and would likely be slow. However, there is a simpler way to improve the semantics here without incurring too much overhead. This set adds an errseq_t to struct address_space, and a corresponding one is added to struct file. Writeback errors are recorded in the mapping's errseq_t, and the one in struct file is used as the "since" value. This changes the semantics of the Linux fsync implementation such that applications can now use it to determine whether there were any writeback errors since fsync(fd) was last called (or since the file was opened in the case of fsync having never been called). Note that those writeback errors may have occurred when writing data that was dirtied via an entirely different fd, but that's the case now with the current mapping_set_error/filemap_check_error infrastructure. This will at least prevent you from getting a false report of success. The new behavior is still consistent with the POSIX spec, and is more reliable for application developers. This patch just adds some basic infrastructure for doing this, and ensures that the f_wb_err "cursor" is properly set when a file is opened. Later patches will change the existing code to use this new infrastructure for reporting errors at fsync time. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
err = __filemap_fdatawrite_range(mapping, lstart, lend,
WB_SYNC_ALL);
/* See comment of filemap_write_and_wait() */
if (err != -EIO)
__filemap_fdatawait_range(mapping, lstart, lend);
}
err2 = file_check_and_advance_wb_err(file);
if (!err)
err = err2;
return err;
}
EXPORT_SYMBOL(file_write_and_wait_range);
/**
* replace_page_cache_page - replace a pagecache page with a new one
* @old: page to be replaced
* @new: page to replace with
* @gfp_mask: allocation mode
*
* This function replaces a page in the pagecache with a new one. On
* success it acquires the pagecache reference for the new page and
* drops it for the old page. Both the old and new pages must be
* locked. This function does not add the new page to the LRU, the
* caller must do that.
*
* The remove + add is atomic. This function cannot fail.
*
* Return: %0
*/
int replace_page_cache_page(struct page *old, struct page *new, gfp_t gfp_mask)
{
struct address_space *mapping = old->mapping;
void (*freepage)(struct page *) = mapping->a_ops->freepage;
pgoff_t offset = old->index;
XA_STATE(xas, &mapping->i_pages, offset);
unsigned long flags;
VM_BUG_ON_PAGE(!PageLocked(old), old);
VM_BUG_ON_PAGE(!PageLocked(new), new);
VM_BUG_ON_PAGE(new->mapping, new);
get_page(new);
new->mapping = mapping;
new->index = offset;
xas_lock_irqsave(&xas, flags);
xas_store(&xas, new);
hugetlb: do not account hugetlb pages as NR_FILE_PAGES hugetlb pages uses add_to_page_cache to track shared mappings. This is OK from the data structure point of view but it is less so from the NR_FILE_PAGES accounting: - huge pages are accounted as 4k which is clearly wrong - this counter is used as the amount of the reclaimable page cache which is incorrect as well because hugetlb pages are special and not reclaimable - the counter is then exported to userspace via /proc/meminfo (in Cached:), /proc/vmstat and /proc/zoneinfo as nr_file_pages which is confusing at least: Cached: 8883504 kB HugePages_Free: 8348 ... Cached: 8916048 kB HugePages_Free: 156 ... thats 8192 huge pages allocated which is ~16G accounted as 32M There are usually not that many huge pages in the system for this to make any visible difference e.g. by fooling __vm_enough_memory or zone_pagecache_reclaimable. Fix this by special casing huge pages in both __delete_from_page_cache and __add_to_page_cache_locked. replace_page_cache_page is currently only used by fuse and that shouldn't touch hugetlb pages AFAICS but it is more robust to check for special casing there as well. Hugetlb pages shouldn't get to any other paths where we do accounting: - migration - we have a special handling via hugetlbfs_migrate_page - shmem - doesn't handle hugetlb pages directly even for SHM_HUGETLB resp. MAP_HUGETLB - swapcache - hugetlb is not swapable This has a user visible effect but I believe it is reasonable because the previously exported number is simply bogus. An alternative would be to account hugetlb pages with their real size and treat them similar to shmem. But this has some drawbacks. First we would have to special case in kernel users of NR_FILE_PAGES and considering how hugetlb is special we would have to do it everywhere. We do not want Cached exported by /proc/meminfo to include it because the value would be even more misleading. __vm_enough_memory and zone_pagecache_reclaimable would have to do the same thing because those pages are simply not reclaimable. The correction is even not trivial because we would have to consider all active hugetlb page sizes properly. Users of the counter outside of the kernel would have to do the same. So the question is why to account something that needs to be basically excluded for each reasonable usage. This doesn't make much sense to me. It seems that this has been broken since hugetlb was introduced but I haven't checked the whole history. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:57:24 +08:00
old->mapping = NULL;
/* hugetlb pages do not participate in page cache accounting. */
if (!PageHuge(old))
__dec_node_page_state(new, NR_FILE_PAGES);
if (!PageHuge(new))
__inc_node_page_state(new, NR_FILE_PAGES);
if (PageSwapBacked(old))
__dec_node_page_state(new, NR_SHMEM);
if (PageSwapBacked(new))
__inc_node_page_state(new, NR_SHMEM);
xas_unlock_irqrestore(&xas, flags);
mem_cgroup_migrate(old, new);
if (freepage)
freepage(old);
put_page(old);
return 0;
}
EXPORT_SYMBOL_GPL(replace_page_cache_page);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
static int __add_to_page_cache_locked(struct page *page,
struct address_space *mapping,
pgoff_t offset, gfp_t gfp_mask,
void **shadowp)
{
XA_STATE(xas, &mapping->i_pages, offset);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
int huge = PageHuge(page);
struct mem_cgroup *memcg;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 10:45:30 +08:00
int error;
void *old;
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 10:45:30 +08:00
VM_BUG_ON_PAGE(!PageLocked(page), page);
VM_BUG_ON_PAGE(PageSwapBacked(page), page);
mapping_set_update(&xas, mapping);
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 10:45:30 +08:00
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
if (!huge) {
error = mem_cgroup_try_charge(page, current->mm,
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:20 +08:00
gfp_mask, &memcg, false);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
if (error)
return error;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
get_page(page);
page->mapping = mapping;
page->index = offset;
do {
xas_lock_irq(&xas);
old = xas_load(&xas);
if (old && !xa_is_value(old))
xas_set_err(&xas, -EEXIST);
xas_store(&xas, page);
if (xas_error(&xas))
goto unlock;
if (xa_is_value(old)) {
mapping->nrexceptional--;
if (shadowp)
*shadowp = old;
}
mapping->nrpages++;
/* hugetlb pages do not participate in page cache accounting */
if (!huge)
__inc_node_page_state(page, NR_FILE_PAGES);
unlock:
xas_unlock_irq(&xas);
} while (xas_nomem(&xas, gfp_mask & GFP_RECLAIM_MASK));
if (xas_error(&xas))
goto error;
hugetlb: do not account hugetlb pages as NR_FILE_PAGES hugetlb pages uses add_to_page_cache to track shared mappings. This is OK from the data structure point of view but it is less so from the NR_FILE_PAGES accounting: - huge pages are accounted as 4k which is clearly wrong - this counter is used as the amount of the reclaimable page cache which is incorrect as well because hugetlb pages are special and not reclaimable - the counter is then exported to userspace via /proc/meminfo (in Cached:), /proc/vmstat and /proc/zoneinfo as nr_file_pages which is confusing at least: Cached: 8883504 kB HugePages_Free: 8348 ... Cached: 8916048 kB HugePages_Free: 156 ... thats 8192 huge pages allocated which is ~16G accounted as 32M There are usually not that many huge pages in the system for this to make any visible difference e.g. by fooling __vm_enough_memory or zone_pagecache_reclaimable. Fix this by special casing huge pages in both __delete_from_page_cache and __add_to_page_cache_locked. replace_page_cache_page is currently only used by fuse and that shouldn't touch hugetlb pages AFAICS but it is more robust to check for special casing there as well. Hugetlb pages shouldn't get to any other paths where we do accounting: - migration - we have a special handling via hugetlbfs_migrate_page - shmem - doesn't handle hugetlb pages directly even for SHM_HUGETLB resp. MAP_HUGETLB - swapcache - hugetlb is not swapable This has a user visible effect but I believe it is reasonable because the previously exported number is simply bogus. An alternative would be to account hugetlb pages with their real size and treat them similar to shmem. But this has some drawbacks. First we would have to special case in kernel users of NR_FILE_PAGES and considering how hugetlb is special we would have to do it everywhere. We do not want Cached exported by /proc/meminfo to include it because the value would be even more misleading. __vm_enough_memory and zone_pagecache_reclaimable would have to do the same thing because those pages are simply not reclaimable. The correction is even not trivial because we would have to consider all active hugetlb page sizes properly. Users of the counter outside of the kernel would have to do the same. So the question is why to account something that needs to be basically excluded for each reasonable usage. This doesn't make much sense to me. It seems that this has been broken since hugetlb was introduced but I haven't checked the whole history. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:57:24 +08:00
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
if (!huge)
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:20 +08:00
mem_cgroup_commit_charge(page, memcg, false, false);
trace_mm_filemap_add_to_page_cache(page);
return 0;
error:
page->mapping = NULL;
/* Leave page->index set: truncation relies upon it */
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:19:20 +08:00
if (!huge)
memcg: adjust to support new THP refcounting As with rmap, with new refcounting we cannot rely on PageTransHuge() to check if we need to charge size of huge page form the cgroup. We need to get information from caller to know whether it was mapped with PMD or PTE. We do uncharge when last reference on the page gone. At that point if we see PageTransHuge() it means we need to unchange whole huge page. The tricky part is partial unmap -- when we try to unmap part of huge page. We don't do a special handing of this situation, meaning we don't uncharge the part of huge page unless last user is gone or split_huge_page() is triggered. In case of cgroup memory pressure happens the partial unmapped page will be split through shrinker. This should be good enough. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 08:52:20 +08:00
mem_cgroup_cancel_charge(page, memcg, false);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return xas_error(&xas);
}
ALLOW_ERROR_INJECTION(__add_to_page_cache_locked, ERRNO);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
/**
* add_to_page_cache_locked - add a locked page to the pagecache
* @page: page to add
* @mapping: the page's address_space
* @offset: page index
* @gfp_mask: page allocation mode
*
* This function is used to add a page to the pagecache. It must be locked.
* This function does not add the page to the LRU. The caller must do that.
*
* Return: %0 on success, negative error code otherwise.
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
*/
int add_to_page_cache_locked(struct page *page, struct address_space *mapping,
pgoff_t offset, gfp_t gfp_mask)
{
return __add_to_page_cache_locked(page, mapping, offset,
gfp_mask, NULL);
}
mm: speculative page references If we can be sure that elevating the page_count on a pagecache page will pin it, we can speculatively run this operation, and subsequently check to see if we hit the right page rather than relying on holding a lock or otherwise pinning a reference to the page. This can be done if get_page/put_page behaves consistently throughout the whole tree (ie. if we "get" the page after it has been used for something else, we must be able to free it with a put_page). Actually, there is a period where the count behaves differently: when the page is free or if it is a constituent page of a compound page. We need an atomic_inc_not_zero operation to ensure we don't try to grab the page in either case. This patch introduces the core locking protocol to the pagecache (ie. adds page_cache_get_speculative, and tweaks some update-side code to make it work). Thanks to Hugh for pointing out an improvement to the algorithm setting page_count to zero when we have control of all references, in order to hold off speculative getters. [kamezawa.hiroyu@jp.fujitsu.com: fix migration_entry_wait()] [hugh@veritas.com: fix add_to_page_cache] [akpm@linux-foundation.org: repair a comment] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 10:45:30 +08:00
EXPORT_SYMBOL(add_to_page_cache_locked);
int add_to_page_cache_lru(struct page *page, struct address_space *mapping,
pgoff_t offset, gfp_t gfp_mask)
{
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
void *shadow = NULL;
vmscan: split LRU lists into anon & file sets Split the LRU lists in two, one set for pages that are backed by real file systems ("file") and one for pages that are backed by memory and swap ("anon"). The latter includes tmpfs. The advantage of doing this is that the VM will not have to scan over lots of anonymous pages (which we generally do not want to swap out), just to find the page cache pages that it should evict. This patch has the infrastructure and a basic policy to balance how much we scan the anon lists and how much we scan the file lists. The big policy changes are in separate patches. [lee.schermerhorn@hp.com: collect lru meminfo statistics from correct offset] [kosaki.motohiro@jp.fujitsu.com: prevent incorrect oom under split_lru] [kosaki.motohiro@jp.fujitsu.com: fix pagevec_move_tail() doesn't treat unevictable page] [hugh@veritas.com: memcg swapbacked pages active] [hugh@veritas.com: splitlru: BDI_CAP_SWAP_BACKED] [akpm@linux-foundation.org: fix /proc/vmstat units] [nishimura@mxp.nes.nec.co.jp: memcg: fix handling of shmem migration] [kosaki.motohiro@jp.fujitsu.com: adjust Quicklists field of /proc/meminfo] [kosaki.motohiro@jp.fujitsu.com: fix style issue of get_scan_ratio()] Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:26:32 +08:00
int ret;
__SetPageLocked(page);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
ret = __add_to_page_cache_locked(page, mapping, offset,
gfp_mask, &shadow);
if (unlikely(ret))
__ClearPageLocked(page);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
else {
/*
* The page might have been evicted from cache only
* recently, in which case it should be activated like
* any other repeatedly accessed page.
mm: workingset: only do workingset activations on reads This is a follow-up to http://www.spinics.net/lists/linux-mm/msg101739.html where Andres reported his database workingset being pushed out by the minimum size enforcement of the inactive file list - currently 50% of cache - as well as repeatedly written file pages that are never actually read. Two changes fell out of the discussions. The first change observes that pages that are only ever written don't benefit from caching beyond what the writeback cache does for partial page writes, and so we shouldn't promote them to the active file list where they compete with pages whose cached data is actually accessed repeatedly. This change comes in two patches - one for in-cache write accesses and one for refaults triggered by writes, neither of which should promote a cache page. Second, with the refault detection we don't need to set 50% of the cache aside for used-once cache anymore since we can detect frequently used pages even when they are evicted between accesses. We can allow the active list to be bigger and thus protect a bigger workingset that isn't challenged by streamers. Depending on the access patterns, this can increase major faults during workingset transitions for better performance during stable phases. This patch (of 3): When rewriting a page, the data in that page is replaced with new data. This means that evicting something else from the active file list, in order to cache data that will be replaced by something else, is likely to be a waste of memory. It is better to save the active list for frequently read pages, because reads actually use the data that is in the page. This patch ignores partial writes, because it is unclear whether the complexity of identifying those is worth any potential performance gain obtained from better caching pages that see repeated partial writes at large enough intervals to not get caught by the use-twice promotion code used for the inactive file list. Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 07:56:25 +08:00
* The exception is pages getting rewritten; evicting other
* data from the working set, only to cache data that will
* get overwritten with something else, is a waste of memory.
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
*/
mm: workingset: tell cache transitions from workingset thrashing Refaults happen during transitions between workingsets as well as in-place thrashing. Knowing the difference between the two has a range of applications, including measuring the impact of memory shortage on the system performance, as well as the ability to smarter balance pressure between the filesystem cache and the swap-backed workingset. During workingset transitions, inactive cache refaults and pushes out established active cache. When that active cache isn't stale, however, and also ends up refaulting, that's bonafide thrashing. Introduce a new page flag that tells on eviction whether the page has been active or not in its lifetime. This bit is then stored in the shadow entry, to classify refaults as transitioning or thrashing. How many page->flags does this leave us with on 32-bit? 20 bits are always page flags 21 if you have an MMU 23 with the zone bits for DMA, Normal, HighMem, Movable 29 with the sparsemem section bits 30 if PAE is enabled 31 with this patch. So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes. If that's not enough, the system can switch to discontigmem and re-gain the 6 or 7 sparsemem section bits. Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:04 +08:00
WARN_ON_ONCE(PageActive(page));
if (!(gfp_mask & __GFP_WRITE) && shadow)
workingset_refault(page, shadow);
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:51 +08:00
lru_cache_add(page);
}
return ret;
}
EXPORT_SYMBOL_GPL(add_to_page_cache_lru);
#ifdef CONFIG_NUMA
struct page *__page_cache_alloc(gfp_t gfp)
{
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:08 +08:00
int n;
struct page *page;
if (cpuset_do_page_mem_spread()) {
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:34:11 +08:00
unsigned int cpuset_mems_cookie;
do {
cpuset_mems_cookie = read_mems_allowed_begin();
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:34:11 +08:00
n = cpuset_mem_spread_node();
mm: rename alloc_pages_exact_node() to __alloc_pages_node() alloc_pages_exact_node() was introduced in commit 6484eb3e2a81 ("page allocator: do not check NUMA node ID when the caller knows the node is valid") as an optimized variant of alloc_pages_node(), that doesn't fallback to current node for nid == NUMA_NO_NODE. Unfortunately the name of the function can easily suggest that the allocation is restricted to the given node and fails otherwise. In truth, the node is only preferred, unless __GFP_THISNODE is passed among the gfp flags. The misleading name has lead to mistakes in the past, see for example commits 5265047ac301 ("mm, thp: really limit transparent hugepage allocation to local node") and b360edb43f8e ("mm, mempolicy: migrate_to_node should only migrate to node"). Another issue with the name is that there's a family of alloc_pages_exact*() functions where 'exact' means exact size (instead of page order), which leads to more confusion. To prevent further mistakes, this patch effectively renames alloc_pages_exact_node() to __alloc_pages_node() to better convey that it's an optimized variant of alloc_pages_node() not intended for general usage. Both functions get described in comments. It has been also considered to really provide a convenience function for allocations restricted to a node, but the major opinion seems to be that __GFP_THISNODE already provides that functionality and we shouldn't duplicate the API needlessly. The number of users would be small anyway. Existing callers of alloc_pages_exact_node() are simply converted to call __alloc_pages_node(), with the exception of sba_alloc_coherent() which open-codes the check for NUMA_NO_NODE, so it is converted to use alloc_pages_node() instead. This means it no longer performs some VM_BUG_ON checks, and since the current check for nid in alloc_pages_node() uses a 'nid < 0' comparison (which includes NUMA_NO_NODE), it may hide wrong values which would be previously exposed. Both differences will be rectified by the next patch. To sum up, this patch makes no functional changes, except temporarily hiding potentially buggy callers. Restricting the checks in alloc_pages_node() is left for the next patch which can in turn expose more existing buggy callers. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Robin Holt <robinmholt@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Cliff Whickman <cpw@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 06:03:50 +08:00
page = __alloc_pages_node(n, gfp, 0);
} while (!page && read_mems_allowed_retry(cpuset_mems_cookie));
cpuset: mm: reduce large amounts of memory barrier related damage v3 Commit c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") wins a super prize for the largest number of memory barriers entered into fast paths for one commit. [get|put]_mems_allowed is incredibly heavy with pairs of full memory barriers inserted into a number of hot paths. This was detected while investigating at large page allocator slowdown introduced some time after 2.6.32. The largest portion of this overhead was shown by oprofile to be at an mfence introduced by this commit into the page allocator hot path. For extra style points, the commit introduced the use of yield() in an implementation of what looks like a spinning mutex. This patch replaces the full memory barriers on both read and write sides with a sequence counter with just read barriers on the fast path side. This is much cheaper on some architectures, including x86. The main bulk of the patch is the retry logic if the nodemask changes in a manner that can cause a false failure. While updating the nodemask, a check is made to see if a false failure is a risk. If it is, the sequence number gets bumped and parallel allocators will briefly stall while the nodemask update takes place. In a page fault test microbenchmark, oprofile samples from __alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The actual results were 3.3.0-rc3 3.3.0-rc3 rc3-vanilla nobarrier-v2r1 Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%) Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%) Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%) Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%) Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%) Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%) Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%) Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%) Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%) Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%) Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%) Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%) Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%) Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%) Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%) MMTests Statistics: duration Sys Time Running Test (seconds) 135.68 132.17 User+Sys Time Running Test (seconds) 164.2 160.13 Total Elapsed Time (seconds) 123.46 120.87 The overall improvement is small but the System CPU time is much improved and roughly in correlation to what oprofile reported (these performance figures are without profiling so skew is expected). The actual number of page faults is noticeably improved. For benchmarks like kernel builds, the overall benefit is marginal but the system CPU time is slightly reduced. To test the actual bug the commit fixed I opened two terminals. The first ran within a cpuset and continually ran a small program that faulted 100M of anonymous data. In a second window, the nodemask of the cpuset was continually randomised in a loop. Without the commit, the program would fail every so often (usually within 10 seconds) and obviously with the commit everything worked fine. With this patch applied, it also worked fine so the fix should be functionally equivalent. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-22 07:34:11 +08:00
cpuset,mm: fix no node to alloc memory when changing cpuset's mems Before applying this patch, cpuset updates task->mems_allowed and mempolicy by setting all new bits in the nodemask first, and clearing all old unallowed bits later. But in the way, the allocator may find that there is no node to alloc memory. The reason is that cpuset rebinds the task's mempolicy, it cleans the nodes which the allocater can alloc pages on, for example: (mpol: mempolicy) task1 task1's mpol task2 alloc page 1 alloc on node0? NO 1 1 change mems from 1 to 0 1 rebind task1's mpol 0-1 set new bits 0 clear disallowed bits alloc on node1? NO 0 ... can't alloc page goto oom This patch fixes this problem by expanding the nodes range first(set newly allowed bits) and shrink it lazily(clear newly disallowed bits). So we use a variable to tell the write-side task that read-side task is reading nodemask, and the write-side task clears newly disallowed nodes after read-side task ends the current memory allocation. [akpm@linux-foundation.org: fix spello] Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Paul Menage <menage@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Ravikiran Thirumalai <kiran@scalex86.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 05:32:08 +08:00
return page;
}
return alloc_pages(gfp, 0);
}
EXPORT_SYMBOL(__page_cache_alloc);
#endif
/*
* In order to wait for pages to become available there must be
* waitqueues associated with pages. By using a hash table of
* waitqueues where the bucket discipline is to maintain all
* waiters on the same queue and wake all when any of the pages
* become available, and for the woken contexts to check to be
* sure the appropriate page became available, this saves space
* at a cost of "thundering herd" phenomena during rare hash
* collisions.
*/
2016-12-25 11:00:30 +08:00
#define PAGE_WAIT_TABLE_BITS 8
#define PAGE_WAIT_TABLE_SIZE (1 << PAGE_WAIT_TABLE_BITS)
static wait_queue_head_t page_wait_table[PAGE_WAIT_TABLE_SIZE] __cacheline_aligned;
static wait_queue_head_t *page_waitqueue(struct page *page)
{
2016-12-25 11:00:30 +08:00
return &page_wait_table[hash_ptr(page, PAGE_WAIT_TABLE_BITS)];
}
2016-12-25 11:00:30 +08:00
void __init pagecache_init(void)
{
2016-12-25 11:00:30 +08:00
int i;
2016-12-25 11:00:30 +08:00
for (i = 0; i < PAGE_WAIT_TABLE_SIZE; i++)
init_waitqueue_head(&page_wait_table[i]);
page_writeback_init();
}
Minor page waitqueue cleanups Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28 04:55:12 +08:00
/* This has the same layout as wait_bit_key - see fs/cachefiles/rdwr.c */
2016-12-25 11:00:30 +08:00
struct wait_page_key {
struct page *page;
int bit_nr;
int page_match;
};
struct wait_page_queue {
struct page *page;
int bit_nr;
wait_queue_entry_t wait;
2016-12-25 11:00:30 +08:00
};
static int wake_page_function(wait_queue_entry_t *wait, unsigned mode, int sync, void *arg)
{
2016-12-25 11:00:30 +08:00
struct wait_page_key *key = arg;
struct wait_page_queue *wait_page
= container_of(wait, struct wait_page_queue, wait);
if (wait_page->page != key->page)
return 0;
key->page_match = 1;
2016-12-25 11:00:30 +08:00
if (wait_page->bit_nr != key->bit_nr)
return 0;
Minor page waitqueue cleanups Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28 04:55:12 +08:00
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
/*
* Stop walking if it's locked.
* Is this safe if put_and_wait_on_page_locked() is in use?
* Yes: the waker must hold a reference to this page, and if PG_locked
* has now already been set by another task, that task must also hold
* a reference to the *same usage* of this page; so there is no need
* to walk on to wake even the put_and_wait_on_page_locked() callers.
*/
2016-12-25 11:00:30 +08:00
if (test_bit(key->bit_nr, &key->page->flags))
Minor page waitqueue cleanups Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28 04:55:12 +08:00
return -1;
2016-12-25 11:00:30 +08:00
return autoremove_wake_function(wait, mode, sync, key);
}
static void wake_up_page_bit(struct page *page, int bit_nr)
{
2016-12-25 11:00:30 +08:00
wait_queue_head_t *q = page_waitqueue(page);
struct wait_page_key key;
unsigned long flags;
wait_queue_entry_t bookmark;
2016-12-25 11:00:30 +08:00
key.page = page;
key.bit_nr = bit_nr;
key.page_match = 0;
bookmark.flags = 0;
bookmark.private = NULL;
bookmark.func = NULL;
INIT_LIST_HEAD(&bookmark.entry);
2016-12-25 11:00:30 +08:00
spin_lock_irqsave(&q->lock, flags);
__wake_up_locked_key_bookmark(q, TASK_NORMAL, &key, &bookmark);
while (bookmark.flags & WQ_FLAG_BOOKMARK) {
/*
* Take a breather from holding the lock,
* allow pages that finish wake up asynchronously
* to acquire the lock and remove themselves
* from wait queue
*/
spin_unlock_irqrestore(&q->lock, flags);
cpu_relax();
spin_lock_irqsave(&q->lock, flags);
__wake_up_locked_key_bookmark(q, TASK_NORMAL, &key, &bookmark);
}
2016-12-25 11:00:30 +08:00
/*
* It is possible for other pages to have collided on the waitqueue
* hash, so in that case check for a page match. That prevents a long-
* term waiter
*
* It is still possible to miss a case here, when we woke page waiters
* and removed them from the waitqueue, but there are still other
* page waiters.
*/
if (!waitqueue_active(q) || !key.page_match) {
ClearPageWaiters(page);
/*
* It's possible to miss clearing Waiters here, when we woke
* our page waiters, but the hashed waitqueue has waiters for
* other pages on it.
*
* That's okay, it's a rare case. The next waker will clear it.
*/
}
spin_unlock_irqrestore(&q->lock, flags);
}
static void wake_up_page(struct page *page, int bit)
{
if (!PageWaiters(page))
return;
wake_up_page_bit(page, bit);
}
2016-12-25 11:00:30 +08:00
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
/*
* A choice of three behaviors for wait_on_page_bit_common():
*/
enum behavior {
EXCLUSIVE, /* Hold ref to page and take the bit when woken, like
* __lock_page() waiting on then setting PG_locked.
*/
SHARED, /* Hold ref to page and check the bit when woken, like
* wait_on_page_writeback() waiting on PG_writeback.
*/
DROP, /* Drop ref to page before wait, no check when woken,
* like put_and_wait_on_page_locked() on PG_locked.
*/
};
2016-12-25 11:00:30 +08:00
static inline int wait_on_page_bit_common(wait_queue_head_t *q,
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
struct page *page, int bit_nr, int state, enum behavior behavior)
2016-12-25 11:00:30 +08:00
{
struct wait_page_queue wait_page;
wait_queue_entry_t *wait = &wait_page.wait;
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
bool bit_is_set;
delayacct: track delays from thrashing cache pages Delay accounting already measures the time a task spends in direct reclaim and waiting for swapin, but in low memory situations tasks spend can spend a significant amount of their time waiting on thrashing page cache. This isn't tracked right now. To know the full impact of memory contention on an individual task, measure the delay when waiting for a recently evicted active cache page to read back into memory. Also update tools/accounting/getdelays.c: [hannes@computer accounting]$ sudo ./getdelays -d -p 1 print delayacct stats ON PID 1 CPU count real total virtual total delay total delay average 50318 745000000 847346785 400533713 0.008ms IO count delay total delay average 435 122601218 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 19 12621439 0ms Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:08 +08:00
bool thrashing = false;
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
bool delayacct = false;
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
unsigned long pflags;
2016-12-25 11:00:30 +08:00
int ret = 0;
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
if (bit_nr == PG_locked &&
delayacct: track delays from thrashing cache pages Delay accounting already measures the time a task spends in direct reclaim and waiting for swapin, but in low memory situations tasks spend can spend a significant amount of their time waiting on thrashing page cache. This isn't tracked right now. To know the full impact of memory contention on an individual task, measure the delay when waiting for a recently evicted active cache page to read back into memory. Also update tools/accounting/getdelays.c: [hannes@computer accounting]$ sudo ./getdelays -d -p 1 print delayacct stats ON PID 1 CPU count real total virtual total delay total delay average 50318 745000000 847346785 400533713 0.008ms IO count delay total delay average 435 122601218 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 19 12621439 0ms Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:08 +08:00
!PageUptodate(page) && PageWorkingset(page)) {
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
if (!PageSwapBacked(page)) {
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
delayacct_thrashing_start();
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
delayacct = true;
}
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
psi_memstall_enter(&pflags);
delayacct: track delays from thrashing cache pages Delay accounting already measures the time a task spends in direct reclaim and waiting for swapin, but in low memory situations tasks spend can spend a significant amount of their time waiting on thrashing page cache. This isn't tracked right now. To know the full impact of memory contention on an individual task, measure the delay when waiting for a recently evicted active cache page to read back into memory. Also update tools/accounting/getdelays.c: [hannes@computer accounting]$ sudo ./getdelays -d -p 1 print delayacct stats ON PID 1 CPU count real total virtual total delay total delay average 50318 745000000 847346785 400533713 0.008ms IO count delay total delay average 435 122601218 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 19 12621439 0ms Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:08 +08:00
thrashing = true;
}
2016-12-25 11:00:30 +08:00
init_wait(wait);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
wait->flags = behavior == EXCLUSIVE ? WQ_FLAG_EXCLUSIVE : 0;
2016-12-25 11:00:30 +08:00
wait->func = wake_page_function;
wait_page.page = page;
wait_page.bit_nr = bit_nr;
for (;;) {
spin_lock_irq(&q->lock);
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 18:06:46 +08:00
if (likely(list_empty(&wait->entry))) {
Minor page waitqueue cleanups Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28 04:55:12 +08:00
__add_wait_queue_entry_tail(q, wait);
2016-12-25 11:00:30 +08:00
SetPageWaiters(page);
}
set_current_state(state);
spin_unlock_irq(&q->lock);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
bit_is_set = test_bit(bit_nr, &page->flags);
if (behavior == DROP)
put_page(page);
if (likely(bit_is_set))
2016-12-25 11:00:30 +08:00
io_schedule();
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
if (behavior == EXCLUSIVE) {
2016-12-25 11:00:30 +08:00
if (!test_and_set_bit_lock(bit_nr, &page->flags))
break;
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
} else if (behavior == SHARED) {
2016-12-25 11:00:30 +08:00
if (!test_bit(bit_nr, &page->flags))
break;
}
2017-08-28 07:25:09 +08:00
if (signal_pending_state(state, current)) {
2017-08-28 07:25:09 +08:00
ret = -EINTR;
break;
}
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
if (behavior == DROP) {
/*
* We can no longer safely access page->flags:
* even if CONFIG_MEMORY_HOTREMOVE is not enabled,
* there is a risk of waiting forever on a page reused
* for something that keeps it locked indefinitely.
* But best check for -EINTR above before breaking.
*/
break;
}
2016-12-25 11:00:30 +08:00
}
finish_wait(q, wait);
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
if (thrashing) {
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
if (delayacct)
psi: pressure stall information for CPU, memory, and IO When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:27 +08:00
delayacct_thrashing_end();
psi_memstall_leave(&pflags);
}
delayacct: track delays from thrashing cache pages Delay accounting already measures the time a task spends in direct reclaim and waiting for swapin, but in low memory situations tasks spend can spend a significant amount of their time waiting on thrashing page cache. This isn't tracked right now. To know the full impact of memory contention on an individual task, measure the delay when waiting for a recently evicted active cache page to read back into memory. Also update tools/accounting/getdelays.c: [hannes@computer accounting]$ sudo ./getdelays -d -p 1 print delayacct stats ON PID 1 CPU count real total virtual total delay total delay average 50318 745000000 847346785 400533713 0.008ms IO count delay total delay average 435 122601218 0ms SWAP count delay total delay average 0 0 0ms RECLAIM count delay total delay average 0 0 0ms THRASHING count delay total delay average 19 12621439 0ms Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Drake <drake@endlessm.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-27 06:06:08 +08:00
2016-12-25 11:00:30 +08:00
/*
* A signal could leave PageWaiters set. Clearing it here if
* !waitqueue_active would be possible (by open-coding finish_wait),
* but still fail to catch it in the case of wait hash collision. We
* already can fail to clear wait hash collision cases, so don't
* bother with signals either.
*/
return ret;
}
void wait_on_page_bit(struct page *page, int bit_nr)
{
wait_queue_head_t *q = page_waitqueue(page);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
wait_on_page_bit_common(q, page, bit_nr, TASK_UNINTERRUPTIBLE, SHARED);
2016-12-25 11:00:30 +08:00
}
EXPORT_SYMBOL(wait_on_page_bit);
int wait_on_page_bit_killable(struct page *page, int bit_nr)
{
wait_queue_head_t *q = page_waitqueue(page);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
return wait_on_page_bit_common(q, page, bit_nr, TASK_KILLABLE, SHARED);
}
EXPORT_SYMBOL(wait_on_page_bit_killable);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
/**
* put_and_wait_on_page_locked - Drop a reference and wait for it to be unlocked
* @page: The page to wait for.
*
* The caller should hold a reference on @page. They expect the page to
* become unlocked relatively soon, but do not wish to hold up migration
* (for example) by holding the reference while waiting for the page to
* come unlocked. After this function returns, the caller should not
* dereference @page.
*/
void put_and_wait_on_page_locked(struct page *page)
{
wait_queue_head_t *q;
page = compound_head(page);
q = page_waitqueue(page);
wait_on_page_bit_common(q, page, PG_locked, TASK_UNINTERRUPTIBLE, DROP);
}
/**
* add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
* @page: Page defining the wait queue of interest
* @waiter: Waiter to add to the queue
*
* Add an arbitrary @waiter to the wait queue for the nominated @page.
*/
void add_page_wait_queue(struct page *page, wait_queue_entry_t *waiter)
{
wait_queue_head_t *q = page_waitqueue(page);
unsigned long flags;
spin_lock_irqsave(&q->lock, flags);
__add_wait_queue_entry_tail(q, waiter);
2016-12-25 11:00:30 +08:00
SetPageWaiters(page);
spin_unlock_irqrestore(&q->lock, flags);
}
EXPORT_SYMBOL_GPL(add_page_wait_queue);
mm: optimize PageWaiters bit use for unlock_page() In commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-28 03:40:38 +08:00
#ifndef clear_bit_unlock_is_negative_byte
/*
* PG_waiters is the high bit in the same byte as PG_lock.
*
* On x86 (and on many other architectures), we can clear PG_lock and
* test the sign bit at the same time. But if the architecture does
* not support that special operation, we just do this all by hand
* instead.
*
* The read of PG_waiters has to be after (or concurrently with) PG_locked
* being cleared, but a memory barrier should be unneccssary since it is
* in the same byte as PG_locked.
*/
static inline bool clear_bit_unlock_is_negative_byte(long nr, volatile void *mem)
{
clear_bit_unlock(nr, mem);
/* smp_mb__after_atomic(); */
return test_bit(PG_waiters, mem);
mm: optimize PageWaiters bit use for unlock_page() In commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-28 03:40:38 +08:00
}
#endif
/**
* unlock_page - unlock a locked page
* @page: the page
*
* Unlocks the page and wakes up sleepers in ___wait_on_page_locked().
* Also wakes sleepers in wait_on_page_writeback() because the wakeup
* mechanism between PageLocked pages and PageWriteback pages is shared.
* But that's OK - sleepers in wait_on_page_writeback() just go back to sleep.
*
mm: optimize PageWaiters bit use for unlock_page() In commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-28 03:40:38 +08:00
* Note that this depends on PG_waiters being the sign bit in the byte
* that contains PG_locked - thus the BUILD_BUG_ON(). That allows us to
* clear the PG_locked bit and test PG_waiters at the same time fairly
* portably (architectures that do LL/SC can test any bit, while x86 can
* test the sign bit).
*/
void unlock_page(struct page *page)
{
mm: optimize PageWaiters bit use for unlock_page() In commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-28 03:40:38 +08:00
BUILD_BUG_ON(PG_waiters != 7);
page = compound_head(page);
VM_BUG_ON_PAGE(!PageLocked(page), page);
mm: optimize PageWaiters bit use for unlock_page() In commit 62906027091f ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-28 03:40:38 +08:00
if (clear_bit_unlock_is_negative_byte(PG_locked, &page->flags))
wake_up_page_bit(page, PG_locked);
}
EXPORT_SYMBOL(unlock_page);
/**
* end_page_writeback - end writeback against a page
* @page: the page
*/
void end_page_writeback(struct page *page)
{
/*
* TestClearPageReclaim could be used here but it is an atomic
* operation and overkill in this particular case. Failing to
* shuffle a page marked for immediate reclaim is too mild to
* justify taking an atomic operation penalty at the end of
* ever page writeback.
*/
if (PageReclaim(page)) {
ClearPageReclaim(page);
rotate_reclaimable_page(page);
}
if (!test_clear_page_writeback(page))
BUG();
smp_mb__after_atomic();
wake_up_page(page, PG_writeback);
}
EXPORT_SYMBOL(end_page_writeback);
/*
* After completing I/O on a page, call this routine to update the page
* flags appropriately
*/
void page_endio(struct page *page, bool is_write, int err)
{
if (!is_write) {
if (!err) {
SetPageUptodate(page);
} else {
ClearPageUptodate(page);
SetPageError(page);
}
unlock_page(page);
} else {
if (err) {
struct address_space *mapping;
SetPageError(page);
mapping = page_mapping(page);
if (mapping)
mapping_set_error(mapping, err);
}
end_page_writeback(page);
}
}
EXPORT_SYMBOL_GPL(page_endio);
/**
* __lock_page - get a lock on the page, assuming we need to sleep to get it
* @__page: the page to lock
*/
2016-12-25 11:00:30 +08:00
void __lock_page(struct page *__page)
{
2016-12-25 11:00:30 +08:00
struct page *page = compound_head(__page);
wait_queue_head_t *q = page_waitqueue(page);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
wait_on_page_bit_common(q, page, PG_locked, TASK_UNINTERRUPTIBLE,
EXCLUSIVE);
}
EXPORT_SYMBOL(__lock_page);
2016-12-25 11:00:30 +08:00
int __lock_page_killable(struct page *__page)
{
2016-12-25 11:00:30 +08:00
struct page *page = compound_head(__page);
wait_queue_head_t *q = page_waitqueue(page);
mm: put_and_wait_on_page_locked() while page is migrated Waiting on a page migration entry has used wait_on_page_locked() all along since 2006: but you cannot safely wait_on_page_locked() without holding a reference to the page, and that extra reference is enough to make migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults on the entry before migrate_page_move_mapping() gets there. And that failure is retried nine times, amplifying the pain when trying to migrate a popular page. With a single persistent faulter, migration sometimes succeeds; with two or three concurrent faulters, success becomes much less likely (and the more the page was mapped, the worse the overhead of unmapping and remapping it on each try). This is especially a problem for memory offlining, where the outer level retries forever (or until terminated from userspace), because a heavy refault workload can trigger an endless loop of migration failures. wait_on_page_locked() is the wrong tool for the job. David Herrmann (but was he the first?) noticed this issue in 2014: https://marc.info/?l=linux-mm&m=140110465608116&w=2 Tim Chen started a thread in August 2017 which appears relevant: https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went on to implicate __migration_entry_wait(): https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in wake_up_page_bit") Baoquan He reported "Memory hotplug softlock issue" 14 November 2018: https://marc.info/?l=linux-mm&m=154217936431300&w=2 We have all assumed that it is essential to hold a page reference while waiting on a page lock: partly to guarantee that there is still a struct page when MEMORY_HOTREMOVE is configured, but also to protect against reuse of the struct page going to someone who then holds the page locked indefinitely, when the waiter can reasonably expect timely unlocking. But in fact, so long as wait_on_page_bit_common() does the put_page(), and is careful not to rely on struct page contents thereafter, there is no need to hold a reference to the page while waiting on it. That does mean that this case cannot go back through the loop: but that's fine for the page migration case, and even if used more widely, is limited by the "Stop walking if it's locked" optimization in wake_page_function(). Add interface put_and_wait_on_page_locked() to do this, using "behavior" enum in place of "lock" arg to wait_on_page_bit_common() to implement it. No interruptible or killable variant needed yet, but they might follow: I have a vague notion that reporting -EINTR should take precedence over return from wait_on_page_bit_common() without knowing the page state, so arrange it accordingly - but that may be nothing but pedantic. __migration_entry_wait() still has to take a brief reference to the page, prior to calling put_and_wait_on_page_locked(): but now that it is dropped before waiting, the chance of impeding page migration is very much reduced. Should we perhaps disable preemption across this? shrink_page_list()'s __ClearPageLocked(): that was a surprise! This survived a lot of testing before that showed up. PageWaiters may have been set by wait_on_page_bit_common(), and the reference dropped, just before shrink_page_list() succeeds in freezing its last page reference: in such a case, unlock_page() must be used. Follow the suggestion from Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now: that optimization predates PageWaiters, and won't buy much these days; but we can reinstate it for the !PageWaiters case if anyone notices. It does raise the question: should vmscan.c's is_page_cache_freeable() and __remove_mapping() now treat a PageWaiters page as if an extra reference were held? Perhaps, but I don't think it matters much, since shrink_page_list() already had to win its trylock_page(), so waiters are not very common there: I noticed no difference when trying the bigger change, and it's surely not needed while put_and_wait_on_page_locked() is only used for page migration. [willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Baoquan He <bhe@redhat.com> Tested-by: Baoquan He <bhe@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Baoquan He <bhe@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Piggin <npiggin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 16:36:14 +08:00
return wait_on_page_bit_common(q, page, PG_locked, TASK_KILLABLE,
EXCLUSIVE);
}
EXPORT_SYMBOL_GPL(__lock_page_killable);
/*
* Return values:
* 1 - page is locked; mmap_sem is still held.
* 0 - page is not locked.
* mmap_sem has been released (up_read()), unless flags had both
* FAULT_FLAG_ALLOW_RETRY and FAULT_FLAG_RETRY_NOWAIT set, in
* which case mmap_sem is still held.
*
* If neither ALLOW_RETRY nor KILLABLE are set, will always return 1
* with the page locked and the mmap_sem unperturbed.
*/
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
int __lock_page_or_retry(struct page *page, struct mm_struct *mm,
unsigned int flags)
{
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/*
* CAUTION! In this case, mmap_sem is not released
* even though return 0.
*/
if (flags & FAULT_FLAG_RETRY_NOWAIT)
return 0;
up_read(&mm->mmap_sem);
if (flags & FAULT_FLAG_KILLABLE)
wait_on_page_locked_killable(page);
else
wait_on_page_locked(page);
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
return 0;
} else {
if (flags & FAULT_FLAG_KILLABLE) {
int ret;
ret = __lock_page_killable(page);
if (ret) {
up_read(&mm->mmap_sem);
return 0;
}
} else
__lock_page(page);
return 1;
mm: retry page fault when blocking on disk transfer This change reduces mmap_sem hold times that are caused by waiting for disk transfers when accessing file mapped VMAs. It introduces the VM_FAULT_ALLOW_RETRY flag, which indicates that the call site wants mmap_sem to be released if blocking on a pending disk transfer. In that case, filemap_fault() returns the VM_FAULT_RETRY status bit and do_page_fault() will then re-acquire mmap_sem and retry the page fault. It is expected that the retry will hit the same page which will now be cached, and thus it will complete with a low mmap_sem hold time. Tests: - microbenchmark: thread A mmaps a large file and does random read accesses to the mmaped area - achieves about 55 iterations/s. Thread B does mmap/munmap in a loop at a separate location - achieves 55 iterations/s before, 15000 iterations/s after. - We are seeing related effects in some applications in house, which show significant performance regressions when running without this change. [akpm@linux-foundation.org: fix warning & crash] Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Reviewed-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 05:21:57 +08:00
}
}
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
/**
* page_cache_next_miss() - Find the next gap in the page cache.
* @mapping: Mapping.
* @index: Index.
* @max_scan: Maximum range to search.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* Search the range [index, min(index + max_scan - 1, ULONG_MAX)] for the
* gap with the lowest index.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* This function may be called under the rcu_read_lock. However, this will
* not atomically search a snapshot of the cache at a single point in time.
* For example, if a gap is created at index 5, then subsequently a gap is
* created at index 10, page_cache_next_miss covering both indices may
* return 10 if called under the rcu_read_lock.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* Return: The index of the gap if found, otherwise an index outside the
* range specified (in which case 'return - index >= max_scan' will be true).
* In the rare case of index wrap-around, 0 will be returned.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*/
pgoff_t page_cache_next_miss(struct address_space *mapping,
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
pgoff_t index, unsigned long max_scan)
{
XA_STATE(xas, &mapping->i_pages, index);
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
while (max_scan--) {
void *entry = xas_next(&xas);
if (!entry || xa_is_value(entry))
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
break;
if (xas.xa_index == 0)
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
break;
}
return xas.xa_index;
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
}
EXPORT_SYMBOL(page_cache_next_miss);
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
/**
* page_cache_prev_miss() - Find the previous gap in the page cache.
* @mapping: Mapping.
* @index: Index.
* @max_scan: Maximum range to search.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* Search the range [max(index - max_scan + 1, 0), index] for the
* gap with the highest index.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* This function may be called under the rcu_read_lock. However, this will
* not atomically search a snapshot of the cache at a single point in time.
* For example, if a gap is created at index 10, then subsequently a gap is
* created at index 5, page_cache_prev_miss() covering both indices may
* return 5 if called under the rcu_read_lock.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*
* Return: The index of the gap if found, otherwise an index outside the
* range specified (in which case 'index - return >= max_scan' will be true).
* In the rare case of wrap-around, ULONG_MAX will be returned.
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
*/
pgoff_t page_cache_prev_miss(struct address_space *mapping,
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
pgoff_t index, unsigned long max_scan)
{
XA_STATE(xas, &mapping->i_pages, index);
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
while (max_scan--) {
void *entry = xas_prev(&xas);
if (!entry || xa_is_value(entry))
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
break;
if (xas.xa_index == ULONG_MAX)
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
break;
}
return xas.xa_index;
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
}
EXPORT_SYMBOL(page_cache_prev_miss);
mm: filemap: move radix tree hole searching here The radix tree hole searching code is only used for page cache, for example the readahead code trying to get a a picture of the area surrounding a fault. It sufficed to rely on the radix tree definition of holes, which is "empty tree slot". But this is about to change, though, as shadow page descriptors will be stored in the page cache after the actual pages get evicted from memory. Move the functions over to mm/filemap.c and make them native page cache operations, where they can later be adapted to handle the new definition of "page cache hole". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:47:44 +08:00
/**
2014-04-04 05:47:46 +08:00
* find_get_entry - find and get a page cache entry
* @mapping: the address_space to search
2014-04-04 05:47:46 +08:00
* @offset: the page cache index
*
* Looks up the page cache slot at @mapping & @offset. If there is a
* page cache page, it is returned with an increased refcount.
*
mm: filemap: update find_get_pages_tag() to deal with shadow entries Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07 03:50:05 +08:00
* If the slot holds a shadow entry of a previously evicted page, or a
* swap entry from shmem/tmpfs, it is returned.
2014-04-04 05:47:46 +08:00
*
* Return: the found page or shadow entry, %NULL if nothing is found.
*/
2014-04-04 05:47:46 +08:00
struct page *find_get_entry(struct address_space *mapping, pgoff_t offset)
{
XA_STATE(xas, &mapping->i_pages, offset);
struct page *page;
rcu_read_lock();
repeat:
xas_reset(&xas);
page = xas_load(&xas);
if (xas_retry(&xas, page))
goto repeat;
/*
* A shadow entry of a recently evicted page, or a swap entry from
* shmem/tmpfs. Return it without attempting to raise page count.
*/
if (!page || xa_is_value(page))
goto out;
if (!page_cache_get_speculative(page))
goto repeat;
/*
* Has the page moved or been split?
* This is part of the lockless pagecache protocol. See
* include/linux/pagemap.h for details.
*/
if (unlikely(page != xas_reload(&xas))) {
put_page(page);
goto repeat;
}
page = find_subpage(page, offset);
out:
rcu_read_unlock();
return page;
}
2014-04-04 05:47:46 +08:00
EXPORT_SYMBOL(find_get_entry);
2014-04-04 05:47:46 +08:00
/**
* find_lock_entry - locate, pin and lock a page cache entry
* @mapping: the address_space to search
* @offset: the page cache index
*
* Looks up the page cache slot at @mapping & @offset. If there is a
* page cache page, it is returned locked and with an increased
* refcount.
*
mm: filemap: update find_get_pages_tag() to deal with shadow entries Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07 03:50:05 +08:00
* If the slot holds a shadow entry of a previously evicted page, or a
* swap entry from shmem/tmpfs, it is returned.
2014-04-04 05:47:46 +08:00
*
* find_lock_entry() may sleep.
*
* Return: the found page or shadow entry, %NULL if nothing is found.
2014-04-04 05:47:46 +08:00
*/
struct page *find_lock_entry(struct address_space *mapping, pgoff_t offset)
{
struct page *page;
repeat:
2014-04-04 05:47:46 +08:00
page = find_get_entry(mapping, offset);
if (page && !xa_is_value(page)) {
lock_page(page);
/* Has the page been truncated? */
if (unlikely(page_mapping(page) != mapping)) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
goto repeat;
}
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page);
}
return page;
}
2014-04-04 05:47:46 +08:00
EXPORT_SYMBOL(find_lock_entry);
/**
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
* pagecache_get_page - find and get a page reference
2014-04-04 05:47:46 +08:00
* @mapping: the address_space to search
* @offset: the page index
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
* @fgp_flags: PCG flags
* @gfp_mask: gfp mask to use for the page cache data page allocation
2014-04-04 05:47:46 +08:00
*
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
* Looks up the page cache slot at @mapping & @offset.
*
* PCG flags modify how the page is returned.
2014-04-04 05:47:46 +08:00
*
* @fgp_flags can be:
*
* - FGP_ACCESSED: the page will be marked accessed
* - FGP_LOCK: Page is return locked
* - FGP_CREAT: If page is not present then a new page is allocated using
* @gfp_mask and added to the page cache and the VM's LRU
* list. The page is returned locked and with an increased
* refcount.
filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:14 +08:00
* - FGP_FOR_MMAP: Similar to FGP_CREAT, only we want to allow the caller to do
* its own locking dance if the page is already in cache, or unlock the page
* before returning if we had to add the page to pagecache.
*
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
* If FGP_LOCK or FGP_CREAT are specified then the function may sleep even
* if the GFP flags specified for FGP_CREAT are atomic.
*
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
* If there is a page cache page, it is returned with an increased refcount.
*
* Return: the found page or %NULL otherwise.
*/
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset,
int fgp_flags, gfp_t gfp_mask)
{
struct page *page;
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
repeat:
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
page = find_get_entry(mapping, offset);
if (xa_is_value(page))
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
page = NULL;
if (!page)
goto no_page;
if (fgp_flags & FGP_LOCK) {
if (fgp_flags & FGP_NOWAIT) {
if (!trylock_page(page)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
return NULL;
}
} else {
lock_page(page);
}
/* Has the page been truncated? */
if (unlikely(compound_head(page)->mapping != mapping)) {
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
goto repeat;
}
VM_BUG_ON_PAGE(page->index != offset, page);
}
if (fgp_flags & FGP_ACCESSED)
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
mark_page_accessed(page);
no_page:
if (!page && (fgp_flags & FGP_CREAT)) {
int err;
if ((fgp_flags & FGP_WRITE) && mapping_cap_account_dirty(mapping))
gfp_mask |= __GFP_WRITE;
if (fgp_flags & FGP_NOFS)
gfp_mask &= ~__GFP_FS;
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
page = __page_cache_alloc(gfp_mask);
if (!page)
return NULL;
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:14 +08:00
if (WARN_ON_ONCE(!(fgp_flags & (FGP_LOCK | FGP_FOR_MMAP))))
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
fgp_flags |= FGP_LOCK;
/* Init accessed so avoid atomic mark_page_accessed later */
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
if (fgp_flags & FGP_ACCESSED)
__SetPageReferenced(page);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
err = add_to_page_cache_lru(page, mapping, offset, gfp_mask);
if (unlikely(err)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
page = NULL;
if (err == -EEXIST)
goto repeat;
}
filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:14 +08:00
/*
* add_to_page_cache_lru locks the page, and for mmap we expect
* an unlocked page.
*/
if (page && (fgp_flags & FGP_FOR_MMAP))
unlock_page(page);
}
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
return page;
}
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
EXPORT_SYMBOL(pagecache_get_page);
2014-04-04 05:47:46 +08:00
/**
* find_get_entries - gang pagecache lookup
* @mapping: The address_space to search
* @start: The starting page cache index
* @nr_entries: The maximum number of entries
* @entries: Where the resulting entries are placed
* @indices: The cache indices corresponding to the entries in @entries
*
* find_get_entries() will search for and return a group of up to
* @nr_entries entries in the mapping. The entries are placed at
* @entries. find_get_entries() takes a reference against any actual
* pages it returns.
*
* The search returns a group of mapping-contiguous page cache entries
* with ascending indexes. There may be holes in the indices due to
* not-present pages.
*
mm: filemap: update find_get_pages_tag() to deal with shadow entries Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07 03:50:05 +08:00
* Any shadow entries of evicted pages, or swap entries from
* shmem/tmpfs, are included in the returned array.
2014-04-04 05:47:46 +08:00
*
* Return: the number of pages and shadow entries which were found.
2014-04-04 05:47:46 +08:00
*/
unsigned find_get_entries(struct address_space *mapping,
pgoff_t start, unsigned int nr_entries,
struct page **entries, pgoff_t *indices)
{
XA_STATE(xas, &mapping->i_pages, start);
struct page *page;
2014-04-04 05:47:46 +08:00
unsigned int ret = 0;
if (!nr_entries)
return 0;
rcu_read_lock();
xas_for_each(&xas, page, ULONG_MAX) {
if (xas_retry(&xas, page))
2014-04-04 05:47:46 +08:00
continue;
/*
* A shadow entry of a recently evicted page, a swap
* entry from shmem/tmpfs or a DAX entry. Return it
* without attempting to raise page count.
*/
if (xa_is_value(page))
2014-04-04 05:47:46 +08:00
goto export;
if (!page_cache_get_speculative(page))
goto retry;
/* Has the page moved or been split? */
if (unlikely(page != xas_reload(&xas)))
goto put_page;
page = find_subpage(page, xas.xa_index);
2014-04-04 05:47:46 +08:00
export:
indices[ret] = xas.xa_index;
2014-04-04 05:47:46 +08:00
entries[ret] = page;
if (++ret == nr_entries)
break;
continue;
put_page:
put_page(page);
retry:
xas_reset(&xas);
2014-04-04 05:47:46 +08:00
}
rcu_read_unlock();
return ret;
}
/**
* find_get_pages_range - gang pagecache lookup
* @mapping: The address_space to search
* @start: The starting page index
* @end: The final page index (inclusive)
* @nr_pages: The maximum number of pages
* @pages: Where the resulting pages are placed
*
* find_get_pages_range() will search for and return a group of up to @nr_pages
* pages in the mapping starting at index @start and up to index @end
* (inclusive). The pages are placed at @pages. find_get_pages_range() takes
* a reference against the returned pages.
*
* The search returns a group of mapping-contiguous pages with ascending
* indexes. There may be holes in the indices due to not-present pages.
* We also update @start to index the next page for the traversal.
*
* Return: the number of pages which were found. If this number is
* smaller than @nr_pages, the end of specified range has been
* reached.
*/
unsigned find_get_pages_range(struct address_space *mapping, pgoff_t *start,
pgoff_t end, unsigned int nr_pages,
struct page **pages)
{
XA_STATE(xas, &mapping->i_pages, *start);
struct page *page;
unsigned ret = 0;
if (unlikely(!nr_pages))
return 0;
rcu_read_lock();
xas_for_each(&xas, page, end) {
if (xas_retry(&xas, page))
continue;
/* Skip over shadow, swap and DAX entries */
if (xa_is_value(page))
continue;
if (!page_cache_get_speculative(page))
goto retry;
/* Has the page moved or been split? */
if (unlikely(page != xas_reload(&xas)))
goto put_page;
pages[ret] = find_subpage(page, xas.xa_index);
if (++ret == nr_pages) {
*start = xas.xa_index + 1;
goto out;
}
continue;
put_page:
put_page(page);
retry:
xas_reset(&xas);
}
/*
* We come here when there is no page beyond @end. We take care to not
* overflow the index @start as it confuses some of the callers. This
* breaks the iteration when there is a page at index -1 but that is
* already broken anyway.
*/
if (end == (pgoff_t)-1)
*start = (pgoff_t)-1;
else
*start = end + 1;
out:
rcu_read_unlock();
return ret;
}
/**
* find_get_pages_contig - gang contiguous pagecache lookup
* @mapping: The address_space to search
* @index: The starting page index
* @nr_pages: The maximum number of pages
* @pages: Where the resulting pages are placed
*
* find_get_pages_contig() works exactly like find_get_pages(), except
* that the returned number of pages are guaranteed to be contiguous.
*
* Return: the number of pages which were found.
*/
unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t index,
unsigned int nr_pages, struct page **pages)
{
XA_STATE(xas, &mapping->i_pages, index);
struct page *page;
unsigned int ret = 0;
if (unlikely(!nr_pages))
return 0;
rcu_read_lock();
for (page = xas_load(&xas); page; page = xas_next(&xas)) {
if (xas_retry(&xas, page))
continue;
/*
* If the entry has been swapped out, we can stop looking.
* No current caller is looking for DAX entries.
*/
if (xa_is_value(page))
break;
if (!page_cache_get_speculative(page))
goto retry;
/* Has the page moved or been split? */
if (unlikely(page != xas_reload(&xas)))
goto put_page;
pages[ret] = find_subpage(page, xas.xa_index);
if (++ret == nr_pages)
break;
continue;
put_page:
put_page(page);
retry:
xas_reset(&xas);
}
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(find_get_pages_contig);
/**
* find_get_pages_range_tag - find and return pages in given range matching @tag
* @mapping: the address_space to search
* @index: the starting page index
* @end: The final page index (inclusive)
* @tag: the tag index
* @nr_pages: the maximum number of pages
* @pages: where the resulting pages are placed
*
* Like find_get_pages, except we only return pages which are tagged with
* @tag. We update @index to index the next page for the traversal.
*
* Return: the number of pages which were found.
*/
unsigned find_get_pages_range_tag(struct address_space *mapping, pgoff_t *index,
pgoff_t end, xa_mark_t tag, unsigned int nr_pages,
struct page **pages)
{
XA_STATE(xas, &mapping->i_pages, *index);
struct page *page;
unsigned ret = 0;
if (unlikely(!nr_pages))
return 0;
rcu_read_lock();
xas_for_each_marked(&xas, page, end, tag) {
if (xas_retry(&xas, page))
continue;
/*
* Shadow entries should never be tagged, but this iteration
* is lockless so there is a window for page reclaim to evict
* a page we saw tagged. Skip over it.
*/
if (xa_is_value(page))
mm: filemap: update find_get_pages_tag() to deal with shadow entries Dave Jones reports the following crash when find_get_pages_tag() runs into an exceptional entry: kernel BUG at mm/filemap.c:1347! RIP: find_get_pages_tag+0x1cb/0x220 Call Trace: find_get_pages_tag+0x36/0x220 pagevec_lookup_tag+0x21/0x30 filemap_fdatawait_range+0xbe/0x1e0 filemap_fdatawait+0x27/0x30 sync_inodes_sb+0x204/0x2a0 sync_inodes_one_sb+0x19/0x20 iterate_supers+0xb2/0x110 sys_sync+0x44/0xb0 ia32_do_call+0x13/0x13 1343 /* 1344 * This function is never used on a shmem/tmpfs 1345 * mapping, so a swap entry won't be found here. 1346 */ 1347 BUG(); After commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") this comment and BUG() are out of date because exceptional entries can now appear in all mappings - as shadows of recently evicted pages. However, as Hugh Dickins notes, "it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably any other PAGECACHE_TAG_*) to appear on an exceptional entry. I expect it comes down to an occasional race in RCU lookup of the radix_tree: lacking absolute synchronization, we might sometimes catch an exceptional entry, with the tag which really belongs with the unexceptional entry which was there an instant before." And indeed, not only is the tree walk lockless, the tags are also read in chunks, one radix tree node at a time. There is plenty of time for page reclaim to swoop in and replace a page that was already looked up as tagged with a shadow entry. Remove the BUG() and update the comment. While reviewing all other lookup sites for whether they properly deal with shadow entries of evicted pages, update all the comments and fix memcg file charge moving to not miss shmem/tmpfs swapcache pages. Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-07 03:50:05 +08:00
continue;
if (!page_cache_get_speculative(page))
goto retry;
/* Has the page moved or been split? */
if (unlikely(page != xas_reload(&xas)))
goto put_page;
pages[ret] = find_subpage(page, xas.xa_index);
if (++ret == nr_pages) {
*index = xas.xa_index + 1;
goto out;
}
continue;
put_page:
put_page(page);
retry:
xas_reset(&xas);
}
/*
* We come here when we got to @end. We take care to not overflow the
* index @index as it confuses some of the callers. This breaks the
* iteration when there is a page at index -1 but that is already
* broken anyway.
*/
if (end == (pgoff_t)-1)
*index = (pgoff_t)-1;
else
*index = end + 1;
out:
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(find_get_pages_range_tag);
[PATCH] readahead: backoff on I/O error Backoff readahead size exponentially on I/O error. Michael Tokarev <mjt@tls.msk.ru> described the problem as: [QUOTE] Suppose there's a CD-rom with a scratch/etc, one sector is unreadable. In order to "fix" it, one have to read it and write to another CD-rom, or something.. or just ignore the error (if it's just a skip in a video stream). Let's assume the unreadable block is number U. But current behavior is just insane. An application requests block number N, which is before U. Kernel tries to read-ahead blocks N..U. Cdrom drive tries to read it, re-read it.. for some time. Finally, when all the N..U-1 blocks are read, kernel returns block number N (as requested) to an application, successefully. Now an app requests block number N+1, and kernel tries to read blocks N+1..U+1. Retrying again as in previous step. And so on, up to when an app requests block number U-1. And when, finally, it requests block U, it receives read error. So, kernel currentry tries to re-read the same failing block as many times as the current readahead value (256 (times?) by default). This whole process already killed my cdrom drive (I posted about it to LKML several months ago) - literally, the drive has fried, and does not work anymore. Ofcourse that problem was a bug in firmware (or whatever) of the drive *too*, but.. main problem with that is current readahead logic as described above. [/QUOTE] Which was confirmed by Jens Axboe <axboe@suse.de>: [QUOTE] For ide-cd, it tends do only end the first part of the request on a medium error. So you may see a lot of repeats :/ [/QUOTE] With this patch, retries are expected to be reduced from, say, 256, to 5. [akpm@osdl.org: cleanups] Signed-off-by: Wu Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 20:48:43 +08:00
/*
* CD/DVDs are error prone. When a medium error occurs, the driver may fail
* a _large_ part of the i/o request. Imagine the worst scenario:
*
* ---R__________________________________________B__________
* ^ reading here ^ bad block(assume 4k)
*
* read(R) => miss => readahead(R...B) => media error => frustrating retries
* => failing the whole request => read(R) => read(R+1) =>
* readahead(R+1...B+1) => bang => read(R+2) => read(R+3) =>
* readahead(R+3...B+2) => bang => read(R+3) => read(R+4) =>
* readahead(R+4...B+3) => bang => read(R+4) => read(R+5) => ......
*
* It is going insane. Fix it by quickly scaling down the readahead size.
*/
static void shrink_readahead_size_eio(struct file *filp,
struct file_ra_state *ra)
{
ra->ra_pages /= 4;
}
/**
* generic_file_buffered_read - generic file read routine
* @iocb: the iocb to read
* @iter: data destination
* @written: already copied
*
* This is a generic file read routine, and uses the
* mapping->a_ops->readpage() function for the actual low-level stuff.
*
* This is really ugly. But the goto's actually try to clarify some
* of the logic when it comes to error handling etc.
*
* Return:
* * total number of bytes copied, including those the were already @written
* * negative error code if nothing was copied
*/
static ssize_t generic_file_buffered_read(struct kiocb *iocb,
struct iov_iter *iter, ssize_t written)
{
struct file *filp = iocb->ki_filp;
struct address_space *mapping = filp->f_mapping;
struct inode *inode = mapping->host;
struct file_ra_state *ra = &filp->f_ra;
loff_t *ppos = &iocb->ki_pos;
pgoff_t index;
pgoff_t last_index;
pgoff_t prev_index;
unsigned long offset; /* offset into pagecache page */
unsigned int prev_offset;
int error = 0;
vfs,mm: fix a dead loop in truncate_inode_pages_range() We triggered a deadloop in truncate_inode_pages_range() on 32 bits architecture with the test case bellow: ... fd = open(); write(fd, buf, 4096); preadv64(fd, &iovec, 1, 0xffffffff000); ftruncate(fd, 0); ... Then ftruncate() will not return forever. The filesystem used in this case is ubifs, but it can be triggered on many other filesystems. When preadv64() is called with offset=0xffffffff000, a page with index=0xffffffff will be added to the radix tree of ->mapping. Then this page can be found in ->mapping with pagevec_lookup(). After that, truncate_inode_pages_range(), which is called in ftruncate(), will fall into an infinite loop: - find a page with index=0xffffffff, since index>=end, this page won't be truncated - index++, and index become 0 - the page with index=0xffffffff will be found again The data type of index is unsigned long, so index won't overflow to 0 on 64 bits architecture in this case, and the dead loop won't happen. Since truncate_inode_pages_range() is executed with holding lock of inode->i_rwsem, any operation related with this lock will be blocked, and a hung task will happen, e.g.: INFO: task truncate_test:3364 blocked for more than 120 seconds. ... call_rwsem_down_write_failed+0x17/0x30 generic_file_write_iter+0x32/0x1c0 ubifs_write_iter+0xcc/0x170 __vfs_write+0xc4/0x120 vfs_write+0xb2/0x1b0 SyS_write+0x46/0xa0 The page with index=0xffffffff added to ->mapping is useless. Fix this by checking the read position before allocating pages. Link: http://lkml.kernel.org/r/1475151010-40166-1-git-send-email-fangwei1@huawei.com Signed-off-by: Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 08:01:52 +08:00
if (unlikely(*ppos >= inode->i_sb->s_maxbytes))
return 0;
vfs,mm: fix a dead loop in truncate_inode_pages_range() We triggered a deadloop in truncate_inode_pages_range() on 32 bits architecture with the test case bellow: ... fd = open(); write(fd, buf, 4096); preadv64(fd, &iovec, 1, 0xffffffff000); ftruncate(fd, 0); ... Then ftruncate() will not return forever. The filesystem used in this case is ubifs, but it can be triggered on many other filesystems. When preadv64() is called with offset=0xffffffff000, a page with index=0xffffffff will be added to the radix tree of ->mapping. Then this page can be found in ->mapping with pagevec_lookup(). After that, truncate_inode_pages_range(), which is called in ftruncate(), will fall into an infinite loop: - find a page with index=0xffffffff, since index>=end, this page won't be truncated - index++, and index become 0 - the page with index=0xffffffff will be found again The data type of index is unsigned long, so index won't overflow to 0 on 64 bits architecture in this case, and the dead loop won't happen. Since truncate_inode_pages_range() is executed with holding lock of inode->i_rwsem, any operation related with this lock will be blocked, and a hung task will happen, e.g.: INFO: task truncate_test:3364 blocked for more than 120 seconds. ... call_rwsem_down_write_failed+0x17/0x30 generic_file_write_iter+0x32/0x1c0 ubifs_write_iter+0xcc/0x170 __vfs_write+0xc4/0x120 vfs_write+0xb2/0x1b0 SyS_write+0x46/0xa0 The page with index=0xffffffff added to ->mapping is useless. Fix this by checking the read position before allocating pages. Link: http://lkml.kernel.org/r/1475151010-40166-1-git-send-email-fangwei1@huawei.com Signed-off-by: Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-08 08:01:52 +08:00
iov_iter_truncate(iter, inode->i_sb->s_maxbytes);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
index = *ppos >> PAGE_SHIFT;
prev_index = ra->prev_pos >> PAGE_SHIFT;
prev_offset = ra->prev_pos & (PAGE_SIZE-1);
last_index = (*ppos + iter->count + PAGE_SIZE-1) >> PAGE_SHIFT;
offset = *ppos & ~PAGE_MASK;
for (;;) {
struct page *page;
pgoff_t end_index;
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
loff_t isize;
unsigned long nr, ret;
cond_resched();
find_page:
if (fatal_signal_pending(current)) {
error = -EINTR;
goto out;
}
page = find_get_page(mapping, index);
if (!page) {
if (iocb->ki_flags & IOCB_NOWAIT)
goto would_block;
page_cache_sync_readahead(mapping,
ra, filp,
index, last_index - index);
page = find_get_page(mapping, index);
if (unlikely(page == NULL))
goto no_cached_page;
}
if (PageReadahead(page)) {
page_cache_async_readahead(mapping,
ra, filp, page,
index, last_index - index);
}
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
if (!PageUptodate(page)) {
if (iocb->ki_flags & IOCB_NOWAIT) {
put_page(page);
goto would_block;
}
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read In the generic read paths the kernel looks up a page in the page cache and if it's up to date, it is used. If not, the page lock is acquired to wait for IO to complete and then check the page. If multiple processes are waiting on IO, they all serialise against the lock and duplicate the checks. This is unnecessary. The page lock in itself does not give any guarantees to the callers about the page state as it can be immediately truncated or reclaimed after the page is unlocked. It's sufficient to wait_on_page_locked and then continue if the page is up to date on wakeup. It is possible that a truncated but up-to-date page is returned but the reference taken during read prevents it disappearing underneath the caller and the data is still valid if PageUptodate. The overall impact is small as even if processes serialise on the lock, the lock section is tiny once the IO is complete. Profiles indicated that unlock_page and friends are generally a tiny portion of a read-intensive workload. An artificial test was created that had instances of dd access a cache-cold file on an ext4 filesystem and measure how long the read took. paralleldd 4.4.0 4.4.0 vanilla avoidlock Amean Elapsd-1 5.28 ( 0.00%) 5.15 ( 2.50%) Amean Elapsd-4 5.29 ( 0.00%) 5.17 ( 2.12%) Amean Elapsd-7 5.28 ( 0.00%) 5.18 ( 1.78%) Amean Elapsd-12 5.20 ( 0.00%) 5.33 ( -2.50%) Amean Elapsd-21 5.14 ( 0.00%) 5.21 ( -1.41%) Amean Elapsd-30 5.30 ( 0.00%) 5.12 ( 3.38%) Amean Elapsd-48 5.78 ( 0.00%) 5.42 ( 6.21%) Amean Elapsd-79 6.78 ( 0.00%) 6.62 ( 2.46%) Amean Elapsd-110 9.09 ( 0.00%) 8.99 ( 1.15%) Amean Elapsd-128 10.60 ( 0.00%) 10.43 ( 1.66%) The impact is small but intuitively, it makes sense to avoid unnecessary calls to lock_page. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:39 +08:00
/*
* See comment in do_read_cache_page on why
* wait_on_page_locked is used to avoid unnecessarily
* serialisations and why it's safe.
*/
error = wait_on_page_locked_killable(page);
if (unlikely(error))
goto readpage_error;
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read In the generic read paths the kernel looks up a page in the page cache and if it's up to date, it is used. If not, the page lock is acquired to wait for IO to complete and then check the page. If multiple processes are waiting on IO, they all serialise against the lock and duplicate the checks. This is unnecessary. The page lock in itself does not give any guarantees to the callers about the page state as it can be immediately truncated or reclaimed after the page is unlocked. It's sufficient to wait_on_page_locked and then continue if the page is up to date on wakeup. It is possible that a truncated but up-to-date page is returned but the reference taken during read prevents it disappearing underneath the caller and the data is still valid if PageUptodate. The overall impact is small as even if processes serialise on the lock, the lock section is tiny once the IO is complete. Profiles indicated that unlock_page and friends are generally a tiny portion of a read-intensive workload. An artificial test was created that had instances of dd access a cache-cold file on an ext4 filesystem and measure how long the read took. paralleldd 4.4.0 4.4.0 vanilla avoidlock Amean Elapsd-1 5.28 ( 0.00%) 5.15 ( 2.50%) Amean Elapsd-4 5.29 ( 0.00%) 5.17 ( 2.12%) Amean Elapsd-7 5.28 ( 0.00%) 5.18 ( 1.78%) Amean Elapsd-12 5.20 ( 0.00%) 5.33 ( -2.50%) Amean Elapsd-21 5.14 ( 0.00%) 5.21 ( -1.41%) Amean Elapsd-30 5.30 ( 0.00%) 5.12 ( 3.38%) Amean Elapsd-48 5.78 ( 0.00%) 5.42 ( 6.21%) Amean Elapsd-79 6.78 ( 0.00%) 6.62 ( 2.46%) Amean Elapsd-110 9.09 ( 0.00%) 8.99 ( 1.15%) Amean Elapsd-128 10.60 ( 0.00%) 10.43 ( 1.66%) The impact is small but intuitively, it makes sense to avoid unnecessary calls to lock_page. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:39 +08:00
if (PageUptodate(page))
goto page_ok;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (inode->i_blkbits == PAGE_SHIFT ||
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
!mapping->a_ops->is_partially_uptodate)
goto page_not_up_to_date;
mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-01 15:43:07 +08:00
/* pipes can't handle partially uptodate pages */
if (unlikely(iov_iter_is_pipe(iter)))
mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. Signed-off-by: Eryu Guan <guaneryu@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-11-01 15:43:07 +08:00
goto page_not_up_to_date;
if (!trylock_page(page))
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
goto page_not_up_to_date;
mm/vfs: revalidate page->mapping in do_generic_file_read() 70 hours into some stress tests of a 2.6.32-based enterprise kernel, we ran into a NULL dereference in here: int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from) { ----> struct inode *inode = page->mapping->host; It looks like page->mapping was the culprit. (xmon trace is below). After closer examination, I realized that do_generic_file_read() does a find_get_page(), and eventually locks the page before calling block_is_partially_uptodate(). However, it doesn't revalidate the page->mapping after the page is locked. So, there's a small window between the find_get_page() and ->is_partially_uptodate() where the page could get truncated and page->mapping cleared. We _have_ a reference, so it can't get reclaimed, but it certainly can be truncated. I think the correct thing is to check page->mapping after the trylock_page(), and jump out if it got truncated. This patch has been running in the test environment for a month or so now, and we have not seen this bug pop up again. xmon info: 1f:mon> e cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770] pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100 lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770 sp: c0000002ae36f9f0 msr: 8000000000009032 dar: 0 dsisr: 40000000 current = 0xc000000378f99e30 paca = 0xc000000000f66300 pid = 21946, comm = bash 1f:mon> r R00 = 0025c0500000006d R16 = 0000000000000000 R01 = c0000002ae36f9f0 R17 = c000000362cd3af0 R02 = c000000000e8cd80 R18 = ffffffffffffffff R03 = c0000000031d0f88 R19 = 0000000000000001 R04 = c0000002ae36fa68 R20 = c0000003bb97b8a0 R05 = 0000000000000000 R21 = c0000002ae36fa68 R06 = 0000000000000000 R22 = 0000000000000000 R07 = 0000000000000001 R23 = c0000002ae36fbb0 R08 = 0000000000000002 R24 = 0000000000000000 R09 = 0000000000000000 R25 = c000000362cd3a80 R10 = 0000000000000000 R26 = 0000000000000002 R11 = c0000000001e7b60 R27 = 0000000000000000 R12 = 0000000042000484 R28 = 0000000000000001 R13 = c000000000f66300 R29 = c0000003bb97b9b8 R14 = 0000000000000001 R30 = c000000000e28a08 R15 = 000000000000ffff R31 = c0000000031d0f88 pc = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100 lr = c000000000142944 .generic_file_aio_read+0x1e4/0x770 msr = 8000000000009032 cr = 22000488 ctr = c0000000001e7a60 xer = 0000000020000000 trap = 300 dar = 0000000000000000 dsisr = 40000000 1f:mon> t [link register ] c000000000142944 .generic_file_aio_read+0x1e4/0x770 [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable) [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160 [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0 [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0 [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40 --- Exception: c00 (System Call) at 00000080a840bc54 SP (fffca15df30) is in userspace 1f:mon> di c0000000001e7a6c c0000000001e7a6c e9290000 ld r9,0(r9) c0000000001e7a70 418200c0 beq c0000000001e7b30 # .block_is_partially_uptodate+0xd0/0x100 c0000000001e7a74 e9440008 ld r10,8(r4) c0000000001e7a78 78a80020 clrldi r8,r5,32 c0000000001e7a7c 3c000001 lis r0,1 c0000000001e7a80 812900a8 lwz r9,168(r9) c0000000001e7a84 39600001 li r11,1 c0000000001e7a88 7c080050 subf r0,r8,r0 c0000000001e7a8c 7f805040 cmplw cr7,r0,r10 c0000000001e7a90 7d6b4830 slw r11,r11,r9 c0000000001e7a94 796b0020 clrldi r11,r11,32 c0000000001e7a98 419d00a8 bgt cr7,c0000000001e7b40 # .block_is_partially_uptodate+0xe0/0x100 c0000000001e7a9c 7fa55840 cmpld cr7,r5,r11 c0000000001e7aa0 7d004214 add r8,r0,r8 c0000000001e7aa4 79080020 clrldi r8,r8,32 c0000000001e7aa8 419c0078 blt cr7,c0000000001e7b20 # .block_is_partially_uptodate+0xc0/0x100 Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Rik van Riel <riel@redhat.com> Cc: <arunabal@in.ibm.com> Cc: <sbest@us.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12 06:05:15 +08:00
/* Did it get truncated before we got the lock? */
if (!page->mapping)
goto page_not_up_to_date_locked;
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
if (!mapping->a_ops->is_partially_uptodate(page,
offset, iter->count))
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
goto page_not_up_to_date_locked;
unlock_page(page);
}
page_ok:
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
/*
* i_size must be checked after we know the page is Uptodate.
*
* Checking i_size after the check allows us to calculate
* the correct value for "nr", which means the zero-filled
* part of the page is not copied back to userspace (unless
* another truncate extends the file - this is desired though).
*/
isize = i_size_read(inode);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end_index = (isize - 1) >> PAGE_SHIFT;
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
if (unlikely(!isize || index > end_index)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
goto out;
}
/* nr is the maximum number of bytes to copy from this page */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
nr = PAGE_SIZE;
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
if (index == end_index) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
nr = ((isize - 1) & ~PAGE_MASK) + 1;
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
if (nr <= offset) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
Fix read/truncate race do_generic_mapping_read currently samples the i_size at the start and doesn't do so again unless it needs to call ->readpage to load a page. After ->readpage it has to re-sample i_size as a truncate may have caused that page to be filled with zeros, and the read() call should not see these. However there are other activities that might cause ->readpage to be called on a page between the time that do_generic_mapping_read samples i_size and when it finds that it has an uptodate page. These include at least read-ahead and possibly another thread performing a read. So do_generic_mapping_read must sample i_size *after* it has an uptodate page. Thus the current sampling at the start and after a read can be replaced with a sampling before the copy-out. The same change applied to __generic_file_splice_read. Note that this fixes any race with truncate_complete_page, but does not fix a possible race with truncate_partial_page. If a partial truncate happens after do_generic_mapping_read samples i_size and before the copy_out, the nuls that truncate_partial_page place in the page could be copied out incorrectly. I think the best fix for that is to *not* zero out parts of the page in truncate_partial_page, but rather to zero out the tail of a page when increasing i_size. Signed-off-by: Neil Brown <neilb@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 19:03:04 +08:00
goto out;
}
}
nr = nr - offset;
/* If users can be writing to this page using arbitrary
* virtual addresses, take care about potential aliasing
* before reading the page on the kernel side.
*/
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
/*
* When a sequential read accesses a page several times,
* only mark it as accessed the first time.
*/
if (prev_index != index || offset != prev_offset)
mark_page_accessed(page);
prev_index = index;
/*
* Ok, we have the page, and it's up-to-date, so
* now we can copy it to user space...
*/
ret = copy_page_to_iter(page, offset, nr, iter);
offset += ret;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
index += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
prev_offset = offset;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
written += ret;
if (!iov_iter_count(iter))
goto out;
if (ret < nr) {
error = -EFAULT;
goto out;
}
continue;
page_not_up_to_date:
/* Get exclusive access to the page ... */
error = lock_page_killable(page);
if (unlikely(error))
goto readpage_error;
vfs: pagecache usage optimization for pagesize!=blocksize When we read some part of a file through pagecache, if there is a pagecache of corresponding index but this page is not uptodate, read IO is issued and this page will be uptodate. I think this is good for pagesize == blocksize environment but there is room for improvement on pagesize != blocksize environment. Because in this case a page can have multiple buffers and even if a page is not uptodate, some buffers can be uptodate. So I suggest that when all buffers which correspond to a part of a file that we want to read are uptodate, use this pagecache and copy data from this pagecache to user buffer even if a page is not uptodate. This can reduce read IO and improve system throughput. I wrote a benchmark program and got result number with this program. This benchmark do: 1: mount and open a test file. 2: create a 512MB file. 3: close a file and umount. 4: mount and again open a test file. 5: pwrite randomly 300000 times on a test file. offset is aligned by IO size(1024bytes). 6: measure time of preading randomly 100000 times on a test file. The result was: 2.6.26 330 sec 2.6.26-patched 226 sec Arch:i386 Filesystem:ext3 Blocksize:1024 bytes Memory: 1GB On ext3/4, a file is written through buffer/block. So random read/write mixed workloads or random read after random write workloads are optimized with this patch under pagesize != blocksize environment. This test result showed this. The benchmark program is as follows: #include <stdio.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> #include <time.h> #include <stdlib.h> #include <string.h> #include <sys/mount.h> #define LEN 1024 #define LOOP 1024*512 /* 512MB */ main(void) { unsigned long i, offset, filesize; int fd; char buf[LEN]; time_t t1, t2; if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } memset(buf, 0, LEN); fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC); if (fd < 0) { perror("cannot open file\n"); exit(1); } for (i = 0; i < LOOP; i++) write(fd, buf, LEN); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) { perror("cannot mount\n"); exit(1); } fd = open("/root/test1/testfile", O_RDWR); if (fd < 0) { perror("cannot open file\n"); exit(1); } filesize = LEN * LOOP; for (i = 0; i < 300000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pwrite(fd, buf, LEN, offset); } printf("start test\n"); time(&t1); for (i = 0; i < 100000; i++){ offset = (random() % filesize) & (~(LEN - 1)); pread(fd, buf, LEN, offset); } time(&t2); printf("%ld sec\n", t2-t1); close(fd); if (umount("/root/test1/") < 0) { perror("cannot umount\n"); exit(1); } } Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Hellwig <hch@infradead.org> Cc: Jan Kara <jack@ucw.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-29 06:46:36 +08:00
page_not_up_to_date_locked:
/* Did it get truncated before we got the lock? */
if (!page->mapping) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
continue;
}
/* Did somebody else fill it already? */
if (PageUptodate(page)) {
unlock_page(page);
goto page_ok;
}
readpage:
/*
* A previous I/O error may have been due to temporary
* failures, eg. multipath errors.
* PG_error will be set again if readpage fails.
*/
ClearPageError(page);
/* Start the actual read. The read will unlock the page. */
error = mapping->a_ops->readpage(filp, page);
if (unlikely(error)) {
if (error == AOP_TRUNCATED_PAGE) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
error = 0;
goto find_page;
}
goto readpage_error;
}
if (!PageUptodate(page)) {
error = lock_page_killable(page);
if (unlikely(error))
goto readpage_error;
if (!PageUptodate(page)) {
if (page->mapping == NULL) {
/*
* invalidate_mapping_pages got it
*/
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
goto find_page;
}
unlock_page(page);
shrink_readahead_size_eio(filp, ra);
error = -EIO;
goto readpage_error;
}
unlock_page(page);
}
goto page_ok;
readpage_error:
/* UHHUH! A synchronous read error occurred. Report it */
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
goto out;
no_cached_page:
/*
* Ok, it wasn't cached, so we need to create a new
* page..
*/
mm: remove __GFP_COLD As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:38:03 +08:00
page = page_cache_alloc(mapping);
if (!page) {
error = -ENOMEM;
goto out;
}
error = add_to_page_cache_lru(page, mapping, index,
mapping_gfp_constraint(mapping, GFP_KERNEL));
if (error) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
if (error == -EEXIST) {
error = 0;
goto find_page;
}
goto out;
}
goto readpage;
}
would_block:
error = -EAGAIN;
out:
ra->prev_pos = prev_index;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
ra->prev_pos <<= PAGE_SHIFT;
ra->prev_pos |= prev_offset;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
*ppos = ((loff_t)index << PAGE_SHIFT) + offset;
file_accessed(filp);
return written ? written : error;
}
/**
* generic_file_read_iter - generic filesystem read routine
* @iocb: kernel I/O control block
* @iter: destination for the data read
*
* This is the "read_iter()" routine for all filesystems
* that can use the page cache directly.
* Return:
* * number of bytes copied, even for partial reads
* * negative error code if nothing was read
*/
ssize_t
generic_file_read_iter(struct kiocb *iocb, struct iov_iter *iter)
{
mm/filemap: generic_file_read_iter(): check for zero reads unconditionally If - generic_file_read_iter() gets called with a zero read length, - the read offset is at a page boundary, - IOCB_DIRECT is not set - and the page in question hasn't made it into the page cache yet, then do_generic_file_read() will trigger a readahead with a req_size hint of zero. Since roundup_pow_of_two(0) is undefined, UBSAN reports UBSAN: Undefined behaviour in include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 3 PID: 1017 Comm: sa1 Tainted: G L 4.5.0-next-20160318+ #14 [...] Call Trace: [...] [<ffffffff813ef61a>] ondemand_readahead+0x3aa/0x3d0 [<ffffffff813ef61a>] ? ondemand_readahead+0x3aa/0x3d0 [<ffffffff813c73bd>] ? find_get_entry+0x2d/0x210 [<ffffffff813ef9c3>] page_cache_sync_readahead+0x63/0xa0 [<ffffffff813cc04d>] do_generic_file_read+0x80d/0xf90 [<ffffffff813cc955>] generic_file_read_iter+0x185/0x420 [...] [<ffffffff81510b06>] __vfs_read+0x256/0x3d0 [...] when get_init_ra_size() gets called from ondemand_readahead(). The net effect is that the initial readahead size is arch dependent for requested read lengths of zero: for example, since 1UL << (sizeof(unsigned long) * 8) evaluates to 1 on x86 while its result is 0 on ARMv7, the initial readahead size becomes 4 on the former and 0 on the latter. What's more, whether or not the file access timestamp is updated for zero length reads is decided differently for the two cases of IOCB_DIRECT being set or cleared: in the first case, generic_file_read_iter() explicitly skips updating that timestamp while in the latter case, it is always updated through the call to do_generic_file_read(). According to POSIX, zero length reads "do not modify the last data access timestamp" and thus, the IOCB_DIRECT behaviour is POSIXly correct. Let generic_file_read_iter() unconditionally check the requested read length at its entry and return immediately with success if it is zero. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:22:14 +08:00
size_t count = iov_iter_count(iter);
ssize_t retval = 0;
mm/filemap: generic_file_read_iter(): check for zero reads unconditionally If - generic_file_read_iter() gets called with a zero read length, - the read offset is at a page boundary, - IOCB_DIRECT is not set - and the page in question hasn't made it into the page cache yet, then do_generic_file_read() will trigger a readahead with a req_size hint of zero. Since roundup_pow_of_two(0) is undefined, UBSAN reports UBSAN: Undefined behaviour in include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 3 PID: 1017 Comm: sa1 Tainted: G L 4.5.0-next-20160318+ #14 [...] Call Trace: [...] [<ffffffff813ef61a>] ondemand_readahead+0x3aa/0x3d0 [<ffffffff813ef61a>] ? ondemand_readahead+0x3aa/0x3d0 [<ffffffff813c73bd>] ? find_get_entry+0x2d/0x210 [<ffffffff813ef9c3>] page_cache_sync_readahead+0x63/0xa0 [<ffffffff813cc04d>] do_generic_file_read+0x80d/0xf90 [<ffffffff813cc955>] generic_file_read_iter+0x185/0x420 [...] [<ffffffff81510b06>] __vfs_read+0x256/0x3d0 [...] when get_init_ra_size() gets called from ondemand_readahead(). The net effect is that the initial readahead size is arch dependent for requested read lengths of zero: for example, since 1UL << (sizeof(unsigned long) * 8) evaluates to 1 on x86 while its result is 0 on ARMv7, the initial readahead size becomes 4 on the former and 0 on the latter. What's more, whether or not the file access timestamp is updated for zero length reads is decided differently for the two cases of IOCB_DIRECT being set or cleared: in the first case, generic_file_read_iter() explicitly skips updating that timestamp while in the latter case, it is always updated through the call to do_generic_file_read(). According to POSIX, zero length reads "do not modify the last data access timestamp" and thus, the IOCB_DIRECT behaviour is POSIXly correct. Let generic_file_read_iter() unconditionally check the requested read length at its entry and return immediately with success if it is zero. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-26 05:22:14 +08:00
if (!count)
goto out; /* skip atime */
if (iocb->ki_flags & IOCB_DIRECT) {
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
loff_t size;
size = i_size_read(inode);
if (iocb->ki_flags & IOCB_NOWAIT) {
if (filemap_range_has_page(mapping, iocb->ki_pos,
iocb->ki_pos + count - 1))
return -EAGAIN;
} else {
retval = filemap_write_and_wait_range(mapping,
iocb->ki_pos,
iocb->ki_pos + count - 1);
if (retval < 0)
goto out;
}
file_accessed(file);
retval = mapping->a_ops->direct_IO(iocb, iter);
if (retval >= 0) {
iocb->ki_pos += retval;
count -= retval;
Fix race when checking i_size on direct i/o read So far I've had one ACK for this, and no other comments. So I think it is probably time to send this via some suitable tree. I'm guessing that the vfs tree would be the most appropriate route, but not sure that there is one at the moment (don't see anything recent at kernel.org) so in that case I think -mm is the "back up plan". Al, please let me know if you will take this? Steve. --------------------- Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio reads with append dio writes" thread on linux-fsdevel, this patch is my current version of the fix proposed as option (b) in that thread. Removing the i_size test from the direct i/o read path at vfs level means that filesystems now have to deal with requests which are beyond i_size themselves. These I've divided into three sets: a) Those with "no op" ->direct_IO (9p, cifs, ceph) These are obviously not going to be an issue b) Those with "home brew" ->direct_IO (nfs, fuse) I've been told that NFS should not have any problem with the larger i_size, however I've added an extra test to FUSE to duplicate the original behaviour just to be on the safe side. c) Those using __blockdev_direct_IO() These call through to ->get_block() which should deal with the EOF condition correctly. I've verified that with GFS2 and I believe that Zheng has verified it for ext4. I've also run the test on XFS and it passes both before and after this change. The part of the patch in filemap.c looks a lot larger than it really is - there are only two lines of real change. The rest is just indentation of the contained code. There remains a test of i_size though, which was added for btrfs. It doesn't cause the other filesystems a problem as the test is performed after ->direct_IO has been called. It is possible that there is a race that does matter to btrfs, however this patch doesn't change that, so its still an overall improvement. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-24 22:42:22 +08:00
}
iov_iter_revert(iter, count - iov_iter_count(iter));
Fix race when checking i_size on direct i/o read So far I've had one ACK for this, and no other comments. So I think it is probably time to send this via some suitable tree. I'm guessing that the vfs tree would be the most appropriate route, but not sure that there is one at the moment (don't see anything recent at kernel.org) so in that case I think -mm is the "back up plan". Al, please let me know if you will take this? Steve. --------------------- Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio reads with append dio writes" thread on linux-fsdevel, this patch is my current version of the fix proposed as option (b) in that thread. Removing the i_size test from the direct i/o read path at vfs level means that filesystems now have to deal with requests which are beyond i_size themselves. These I've divided into three sets: a) Those with "no op" ->direct_IO (9p, cifs, ceph) These are obviously not going to be an issue b) Those with "home brew" ->direct_IO (nfs, fuse) I've been told that NFS should not have any problem with the larger i_size, however I've added an extra test to FUSE to duplicate the original behaviour just to be on the safe side. c) Those using __blockdev_direct_IO() These call through to ->get_block() which should deal with the EOF condition correctly. I've verified that with GFS2 and I believe that Zheng has verified it for ext4. I've also run the test on XFS and it passes both before and after this change. The part of the patch in filemap.c looks a lot larger than it really is - there are only two lines of real change. The rest is just indentation of the contained code. There remains a test of i_size though, which was added for btrfs. It doesn't cause the other filesystems a problem as the test is performed after ->direct_IO has been called. It is possible that there is a race that does matter to btrfs, however this patch doesn't change that, so its still an overall improvement. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-24 22:42:22 +08:00
/*
* Btrfs can have a short DIO read if we encounter
* compressed extents, so if there was an error, or if
* we've already read everything we wanted to, or if
* there was a short read because we hit EOF, go ahead
* and return. Otherwise fallthrough to buffered io for
* the rest of the read. Buffered reads will not work for
* DAX files, so don't bother trying.
Fix race when checking i_size on direct i/o read So far I've had one ACK for this, and no other comments. So I think it is probably time to send this via some suitable tree. I'm guessing that the vfs tree would be the most appropriate route, but not sure that there is one at the moment (don't see anything recent at kernel.org) so in that case I think -mm is the "back up plan". Al, please let me know if you will take this? Steve. --------------------- Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio reads with append dio writes" thread on linux-fsdevel, this patch is my current version of the fix proposed as option (b) in that thread. Removing the i_size test from the direct i/o read path at vfs level means that filesystems now have to deal with requests which are beyond i_size themselves. These I've divided into three sets: a) Those with "no op" ->direct_IO (9p, cifs, ceph) These are obviously not going to be an issue b) Those with "home brew" ->direct_IO (nfs, fuse) I've been told that NFS should not have any problem with the larger i_size, however I've added an extra test to FUSE to duplicate the original behaviour just to be on the safe side. c) Those using __blockdev_direct_IO() These call through to ->get_block() which should deal with the EOF condition correctly. I've verified that with GFS2 and I believe that Zheng has verified it for ext4. I've also run the test on XFS and it passes both before and after this change. The part of the patch in filemap.c looks a lot larger than it really is - there are only two lines of real change. The rest is just indentation of the contained code. There remains a test of i_size though, which was added for btrfs. It doesn't cause the other filesystems a problem as the test is performed after ->direct_IO has been called. It is possible that there is a race that does matter to btrfs, however this patch doesn't change that, so its still an overall improvement. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-24 22:42:22 +08:00
*/
if (retval < 0 || !count || iocb->ki_pos >= size ||
IS_DAX(inode))
Fix race when checking i_size on direct i/o read So far I've had one ACK for this, and no other comments. So I think it is probably time to send this via some suitable tree. I'm guessing that the vfs tree would be the most appropriate route, but not sure that there is one at the moment (don't see anything recent at kernel.org) so in that case I think -mm is the "back up plan". Al, please let me know if you will take this? Steve. --------------------- Following on from the "Re: [PATCH v3] vfs: fix a bug when we do some dio reads with append dio writes" thread on linux-fsdevel, this patch is my current version of the fix proposed as option (b) in that thread. Removing the i_size test from the direct i/o read path at vfs level means that filesystems now have to deal with requests which are beyond i_size themselves. These I've divided into three sets: a) Those with "no op" ->direct_IO (9p, cifs, ceph) These are obviously not going to be an issue b) Those with "home brew" ->direct_IO (nfs, fuse) I've been told that NFS should not have any problem with the larger i_size, however I've added an extra test to FUSE to duplicate the original behaviour just to be on the safe side. c) Those using __blockdev_direct_IO() These call through to ->get_block() which should deal with the EOF condition correctly. I've verified that with GFS2 and I believe that Zheng has verified it for ext4. I've also run the test on XFS and it passes both before and after this change. The part of the patch in filemap.c looks a lot larger than it really is - there are only two lines of real change. The rest is just indentation of the contained code. There remains a test of i_size though, which was added for btrfs. It doesn't cause the other filesystems a problem as the test is performed after ->direct_IO has been called. It is possible that there is a race that does matter to btrfs, however this patch doesn't change that, so its still an overall improvement. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Reported-by: Zheng Liu <gnehzuil.liu@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-01-24 22:42:22 +08:00
goto out;
}
retval = generic_file_buffered_read(iocb, iter, retval);
out:
return retval;
}
EXPORT_SYMBOL(generic_file_read_iter);
#ifdef CONFIG_MMU
#define MMAP_LOTSAMISS (100)
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
/*
* lock_page_maybe_drop_mmap - lock the page, possibly dropping the mmap_sem
* @vmf - the vm_fault for this fault.
* @page - the page to lock.
* @fpin - the pointer to the file we may pin (or is already pinned).
*
* This works similar to lock_page_or_retry in that it can drop the mmap_sem.
* It differs in that it actually returns the page locked if it returns 1 and 0
* if it couldn't lock the page. If we did have to drop the mmap_sem then fpin
* will point to the pinned file and needs to be fput()'ed at a later point.
*/
static int lock_page_maybe_drop_mmap(struct vm_fault *vmf, struct page *page,
struct file **fpin)
{
if (trylock_page(page))
return 1;
/*
* NOTE! This will make us return with VM_FAULT_RETRY, but with
* the mmap_sem still held. That's how FAULT_FLAG_RETRY_NOWAIT
* is supposed to work. We have way too many special cases..
*/
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
if (vmf->flags & FAULT_FLAG_RETRY_NOWAIT)
return 0;
*fpin = maybe_unlock_mmap_for_io(vmf, *fpin);
if (vmf->flags & FAULT_FLAG_KILLABLE) {
if (__lock_page_killable(page)) {
/*
* We didn't have the right flags to drop the mmap_sem,
* but all fault_handlers only check for fatal signals
* if we return VM_FAULT_RETRY, so we need to drop the
* mmap_sem here and return 0 if we don't have a fpin.
*/
if (*fpin == NULL)
up_read(&vmf->vma->vm_mm->mmap_sem);
return 0;
}
} else
__lock_page(page);
return 1;
}
/*
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
* Synchronous readahead happens when we don't even find a page in the page
* cache at all. We don't want to perform IO under the mmap sem, so if we have
* to drop the mmap sem we return the file that was pinned in order for us to do
* that. If we didn't pin a file then we return NULL. The file that is
* returned needs to be fput()'ed when we're done with it.
*/
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
static struct file *do_sync_mmap_readahead(struct vm_fault *vmf)
{
struct file *file = vmf->vma->vm_file;
struct file_ra_state *ra = &file->f_ra;
struct address_space *mapping = file->f_mapping;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
struct file *fpin = NULL;
pgoff_t offset = vmf->pgoff;
/* If we don't want any read-ahead, don't bother */
if (vmf->vma->vm_flags & VM_RAND_READ)
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
if (!ra->ra_pages)
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
if (vmf->vma->vm_flags & VM_SEQ_READ) {
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
fpin = maybe_unlock_mmap_for_io(vmf, fpin);
readahead: enforce full sync mmap readahead size Now that we do readahead for sequential mmap reads, here is a simple evaluation of the impacts, and one further optimization. It's an NFS-root debian desktop system, readahead size = 60 pages. The numbers are grabbed after a fresh boot into console. approach pgmajfault RA miss ratio mmap IO count avg IO size(pages) A 383 31.6% 383 11 B 225 32.4% 390 11 C 224 32.6% 307 13 case A: mmap sync/async readahead disabled case B: mmap sync/async readahead enabled, with enforced full async readahead size case C: mmap sync/async readahead enabled, with enforced full sync/async readahead size or: A = vanilla 2.6.30-rc1 B = A plus mmap readahead C = B plus this patch The numbers show that - there are good possibilities for random mmap reads to trigger readahead - 'pgmajfault' is reduced by 1/3, due to the _async_ nature of readahead - case C can further reduce IO count by 1/4 - readahead miss ratios are not quite affected The theory is - readahead is _good_ for clustered random reads, and can perform _better_ than readaround because they could be _async_. - async readahead size is guaranteed to be larger than readaround size, and they are _async_, hence will mostly behave better However for B - sync readahead size could be smaller than readaround size, hence may make things worse by produce more smaller IOs which will be fixed by this patch. Final conclusion: - mmap readahead reduced major faults by 1/3 and no obvious overheads; - mmap io can be further reduced by 1/4 with this patch. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 06:31:38 +08:00
page_cache_sync_readahead(mapping, ra, file, offset,
ra->ra_pages);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
}
/* Avoid banging the cache line if not needed */
if (ra->mmap_miss < MMAP_LOTSAMISS * 10)
ra->mmap_miss++;
/*
* Do we miss much more than hit in this file? If so,
* stop bothering with read-ahead. It will only hurt.
*/
if (ra->mmap_miss > MMAP_LOTSAMISS)
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
/*
* mmap read-around
*/
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
fpin = maybe_unlock_mmap_for_io(vmf, fpin);
mm: use only per-device readahead limit Maximal readahead size is limited now by two values: 1) by global 2Mb constant (MAX_READAHEAD in max_sane_readahead()) 2) by configurable per-device value* (bdi->ra_pages) There are devices, which require custom readahead limit. For instance, for RAIDs it's calculated as number of devices multiplied by chunk size times 2. Readahead size can never be larger than bdi->ra_pages * 2 value (POSIX_FADV_SEQUNTIAL doubles readahead size). If so, why do we need two limits? I suggest to completely remove this max_sane_readahead() stuff and use per-device readahead limit everywhere. Also, using right readahead size for RAID disks can significantly increase i/o performance: before: dd if=/dev/md2 of=/dev/null bs=100M count=100 100+0 records in 100+0 records out 10485760000 bytes (10 GB) copied, 12.9741 s, 808 MB/s after: $ dd if=/dev/md2 of=/dev/null bs=100M count=100 100+0 records in 100+0 records out 10485760000 bytes (10 GB) copied, 8.91317 s, 1.2 GB/s (It's an 8-disks RAID5 storage). This patch doesn't change sys_readahead and madvise(MADV_WILLNEED) behavior introduced by 6d2be915e589b58 ("mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages"). Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: onstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 10:47:08 +08:00
ra->start = max_t(long, 0, offset - ra->ra_pages / 2);
ra->size = ra->ra_pages;
ra->async_size = ra->ra_pages / 4;
ra_submit(ra, mapping, file);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
}
/*
* Asynchronous readahead happens when we find the page and PG_readahead,
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
* so we want to possibly extend the readahead further. We return the file that
* was pinned if we have to drop the mmap_sem in order to do IO.
*/
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
static struct file *do_async_mmap_readahead(struct vm_fault *vmf,
struct page *page)
{
struct file *file = vmf->vma->vm_file;
struct file_ra_state *ra = &file->f_ra;
struct address_space *mapping = file->f_mapping;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
struct file *fpin = NULL;
pgoff_t offset = vmf->pgoff;
/* If we don't want any read-ahead, don't bother */
if (vmf->vma->vm_flags & VM_RAND_READ)
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
return fpin;
if (ra->mmap_miss > 0)
ra->mmap_miss--;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
if (PageReadahead(page)) {
fpin = maybe_unlock_mmap_for_io(vmf, fpin);
readahead: enforce full readahead size on async mmap readahead We need this in one particular case and two more general ones. Now we do async readahead for sequential mmap reads, and do it with the help of PG_readahead. For normal reads, PG_readahead is the sufficient condition to do a sequential readahead. But unfortunately, for mmap reads, there is a tiny nuisance: [11736.998347] readahead-init0(process: sh/23926, file: sda1/w3m, offset=0:4503599627370495, ra=0+4-3) = 4 [11737.014985] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=290+32-0) = 17 [11737.019488] readahead-around(process: w3m/23926, file: sda1/w3m, offset=0:0, ra=118+32-0) = 32 [11737.024921] readahead-interleaved(process: w3m/23926, file: sda1/w3m, offset=0:2, ra=4+6-6) = 6 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~ An unfavorably small readahead. The original dumb read-around size could be more efficient. That happened because ld-linux.so does a read(832) in L1 before mmap(), which triggers a 4-page readahead, with the second page tagged PG_readahead. L0: open("/lib/libc.so.6", O_RDONLY) = 3 L1: read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\342"..., 832) = 832 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ L2: fstat(3, {st_mode=S_IFREG|0755, st_size=1420624, ...}) = 0 L3: mmap(NULL, 3527256, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fac6e51d000 L4: mprotect(0x7fac6e671000, 2097152, PROT_NONE) = 0 L5: mmap(0x7fac6e871000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x154000) = 0x7fac6e871000 L6: mmap(0x7fac6e876000, 16984, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fac6e876000 L7: close(3) = 0 In general, the PG_readahead flag will also be hit in cases - sequential reads - clustered random reads A full readahead size is desirable in both cases. Cc: Nick Piggin <npiggin@suse.de> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 06:31:29 +08:00
page_cache_async_readahead(mapping, ra, file,
page, offset, ra->ra_pages);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
}
return fpin;
}
/**
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
* filemap_fault - read in file data for page fault handling
* @vmf: struct vm_fault containing details of the fault
*
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
* filemap_fault() is invoked via the vma operations vector for a
* mapped memory region to read in file data during a page fault.
*
* The goto's are kind of ugly, but this streamlines the normal case of having
* it in the page cache, and handles the special cases reasonably without
* having a lot of duplicated code.
*
* vma->vm_mm->mmap_sem must be held on entry.
*
* If our return value has VM_FAULT_RETRY set, it's because the mmap_sem
* may be dropped before doing I/O or by lock_page_maybe_drop_mmap().
*
* If our return value does not have VM_FAULT_RETRY set, the mmap_sem
* has not been released.
*
* We never return with VM_FAULT_RETRY and a bit from VM_FAULT_ERROR set.
*
* Return: bitwise-OR of %VM_FAULT_ codes.
*/
vm_fault_t filemap_fault(struct vm_fault *vmf)
{
int error;
struct file *file = vmf->vma->vm_file;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
struct file *fpin = NULL;
struct address_space *mapping = file->f_mapping;
struct file_ra_state *ra = &file->f_ra;
struct inode *inode = mapping->host;
pgoff_t offset = vmf->pgoff;
pgoff_t max_off;
struct page *page;
vm_fault_t ret = 0;
max_off = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
if (unlikely(offset >= max_off))
return VM_FAULT_SIGBUS;
/*
* Do we have something in the page cache already?
*/
page = find_get_page(mapping, offset);
if (likely(page) && !(vmf->flags & FAULT_FLAG_TRIED)) {
/*
* We found the page, so try async readahead before
* waiting for the lock.
*/
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
fpin = do_async_mmap_readahead(vmf, page);
} else if (!page) {
/* No page in the page cache at all */
count_vm_event(PGMAJFAULT);
count_memcg_event_mm(vmf->vma->vm_mm, PGMAJFAULT);
ret = VM_FAULT_MAJOR;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
fpin = do_sync_mmap_readahead(vmf);
retry_find:
filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:14 +08:00
page = pagecache_get_page(mapping, offset,
FGP_CREAT|FGP_FOR_MMAP,
vmf->gfp_mask);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
if (!page) {
if (fpin)
goto out_retry;
filemap: kill page_cache_read usage in filemap_fault Patch series "drop the mmap_sem when doing IO in the fault path", v6. Now that we have proper isolation in place with cgroups2 we have started going through and fixing the various priority inversions. Most are all gone now, but this one is sort of weird since it's not necessarily a priority inversion that happens within the kernel, but rather because of something userspace does. We have giant applications that we want to protect, and parts of these giant applications do things like watch the system state to determine how healthy the box is for load balancing and such. This involves running 'ps' or other such utilities. These utilities will often walk /proc/<pid>/whatever, and these files can sometimes need to down_read(&task->mmap_sem). Not usually a big deal, but we noticed when we are stress testing that sometimes our protected application has latency spikes trying to get the mmap_sem for tasks that are in lower priority cgroups. This is because any down_write() on a semaphore essentially turns it into a mutex, so even if we currently have it held for reading, any new readers will not be allowed on to keep from starving the writer. This is fine, except a lower priority task could be stuck doing IO because it has been throttled to the point that its IO is taking much longer than normal. But because a higher priority group depends on this completing it is now stuck behind lower priority work. In order to avoid this particular priority inversion we want to use the existing retry mechanism to stop from holding the mmap_sem at all if we are going to do IO. This already exists in the read case sort of, but needed to be extended for more than just grabbing the page lock. With io.latency we throttle at submit_bio() time, so the readahead stuff can block and even page_cache_read can block, so all these paths need to have the mmap_sem dropped. The other big thing is ->page_mkwrite. btrfs is particularly shitty here because we have to reserve space for the dirty page, which can be a very expensive operation. We use the same retry method as the read path, and simply cache the page and verify the page is still setup properly the next pass through ->page_mkwrite(). I've tested these patches with xfstests and there are no regressions. This patch (of 3): If we do not have a page at filemap_fault time we'll do this weird forced page_cache_read thing to populate the page, and then drop it again and loop around and find it. This makes for 2 ways we can read a page in filemap_fault, and it's not really needed. Instead add a FGP_FOR_MMAP flag so that pagecache_get_page() will return a unlocked page that's in pagecache. Then use the normal page locking and readpage logic already in filemap_fault. This simplifies the no page in page cache case significantly. [akpm@linux-foundation.org: fix comment text] [josef@toxicpanda.com: don't unlock null page in FGP_FOR_MMAP case] Link: http://lkml.kernel.org/r/20190312201742.22935-1-josef@toxicpanda.com Link: http://lkml.kernel.org/r/20181211173801.29535-2-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:14 +08:00
return vmf_error(-ENOMEM);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
}
}
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
if (!lock_page_maybe_drop_mmap(vmf, page, &fpin))
goto out_retry;
/* Did it get truncated? */
filemap: check compound_head(page)->mapping in filemap_fault() Patch series "Enable THP for text section of non-shmem files", v10; This patchset follows up discussion at LSF/MM 2019. The motivation is to put text section of an application in THP, and thus reduces iTLB miss rate and improves performance. Both Facebook and Oracle showed strong interests to this feature. To make reviews easier, this set aims a mininal valid product. Current version of the work does not have any changes to file system specific code. This comes with some limitations (discussed later). This set enables an application to "hugify" its text section by simply running something like: madvise(0x600000, 0x80000, MADV_HUGEPAGE); Before this call, the /proc/<pid>/maps looks like: 00400000-074d0000 r-xp 00000000 00:27 2006927 app After this call, part of the text section is split out and mapped to THP: 00400000-00425000 r-xp 00000000 00:27 2006927 app 00600000-00e00000 r-xp 00200000 00:27 2006927 app <<< on THP 00e00000-074d0000 r-xp 00a00000 00:27 2006927 app Limitations: 1. This only works for text section (vma with VM_DENYWRITE). 2. Original limitation #2 is removed in v3. We gated this feature with an experimental config, READ_ONLY_THP_FOR_FS. Once we get better support on the write path, we can remove the config and enable it by default. Tested cases: 1. Tested with btrfs and ext4. 2. Tested with real work application (memcache like caching service). 3. Tested with "THP aware uprobe": https://patchwork.kernel.org/project/linux-mm/list/?series=131339 This patch (of 7): Currently, filemap_fault() avoids race condition with truncate by checking page->mapping == mapping. This does not work for compound pages. This patch let it check compound_head(page)->mapping instead. Link: http://lkml.kernel.org/r/20190801184244.3169074-2-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24 06:37:44 +08:00
if (unlikely(compound_head(page)->mapping != mapping)) {
unlock_page(page);
put_page(page);
goto retry_find;
}
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page);
/*
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
* We have a locked page in the page cache, now we need to check
* that it's up-to-date. If not, it is going to be due to an error.
*/
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
if (unlikely(!PageUptodate(page)))
goto page_not_uptodate;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
/*
* We've made it this far and we had to drop our mmap_sem, now is the
* time to return to the upper layer and have it re-find the vma and
* redo the fault.
*/
if (fpin) {
unlock_page(page);
goto out_retry;
}
/*
* Found the page and have a reference on it.
* We must recheck i_size under page lock.
*/
max_off = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
if (unlikely(offset >= max_off)) {
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return VM_FAULT_SIGBUS;
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
}
vmf->page = page;
mm: fault feedback #2 This patch completes Linus's wish that the fault return codes be made into bit flags, which I agree makes everything nicer. This requires requires all handle_mm_fault callers to be modified (possibly the modifications should go further and do things like fault accounting in handle_mm_fault -- however that would be for another patch). [akpm@linux-foundation.org: fix alpha build] [akpm@linux-foundation.org: fix s390 build] [akpm@linux-foundation.org: fix sparc build] [akpm@linux-foundation.org: fix sparc64 build] [akpm@linux-foundation.org: fix ia64 build] Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Matthew Wilcox <willy@debian.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Still apparently needs some ARM and PPC loving - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:47:05 +08:00
return ret | VM_FAULT_LOCKED;
page_not_uptodate:
/*
* Umm, take care of errors if the page isn't up-to-date.
* Try to re-read it _once_. We do this synchronously,
* because there really aren't any performance issues here
* and we need to check for errors.
*/
ClearPageError(page);
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
fpin = maybe_unlock_mmap_for_io(vmf, fpin);
error = mapping->a_ops->readpage(file, page);
if (!error) {
wait_on_page_locked(page);
if (!PageUptodate(page))
error = -EIO;
}
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
if (fpin)
goto out_retry;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
if (!error || error == AOP_TRUNCATED_PAGE)
goto retry_find;
mm: fix fault vs invalidate race for linear mappings Fix the race between invalidate_inode_pages and do_no_page. Andrea Arcangeli identified a subtle race between invalidation of pages from pagecache with userspace mappings, and do_no_page. The issue is that invalidation has to shoot down all mappings to the page, before it can be discarded from the pagecache. Between shooting down ptes to a particular page, and actually dropping the struct page from the pagecache, do_no_page from any process might fault on that page and establish a new mapping to the page just before it gets discarded from the pagecache. The most common case where such invalidation is used is in file truncation. This case was catered for by doing a sort of open-coded seqlock between the file's i_size, and its truncate_count. Truncation will decrease i_size, then increment truncate_count before unmapping userspace pages; do_no_page will read truncate_count, then find the page if it is within i_size, and then check truncate_count under the page table lock and back out and retry if it had subsequently been changed (ptl will serialise against unmapping, and ensure a potentially updated truncate_count is actually visible). Complexity and documentation issues aside, the locking protocol fails in the case where we would like to invalidate pagecache inside i_size. do_no_page can come in anytime and filemap_nopage is not aware of the invalidation in progress (as it is when it is outside i_size). The end result is that dangling (->mapping == NULL) pages that appear to be from a particular file may be mapped into userspace with nonsense data. Valid mappings to the same place will see a different page. Andrea implemented two working fixes, one using a real seqlock, another using a page->flags bit. He also proposed using the page lock in do_no_page, but that was initially considered too heavyweight. However, it is not a global or per-file lock, and the page cacheline is modified in do_no_page to increment _count and _mapcount anyway, so a further modification should not be a large performance hit. Scalability is not an issue. This patch implements this latter approach. ->nopage implementations return with the page locked if it is possible for their underlying file to be invalidated (in that case, they must set a special vm_flags bit to indicate so). do_no_page only unlocks the page after setting up the mapping completely. invalidation is excluded because it holds the page lock during invalidation of each page (and ensures that the page is not mapped while holding the lock). This also allows significant simplifications in do_no_page, because we have the page locked in the right place in the pagecache from the start. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:57 +08:00
/* Things didn't work out. Return zero to tell the mm layer so. */
[PATCH] readahead: backoff on I/O error Backoff readahead size exponentially on I/O error. Michael Tokarev <mjt@tls.msk.ru> described the problem as: [QUOTE] Suppose there's a CD-rom with a scratch/etc, one sector is unreadable. In order to "fix" it, one have to read it and write to another CD-rom, or something.. or just ignore the error (if it's just a skip in a video stream). Let's assume the unreadable block is number U. But current behavior is just insane. An application requests block number N, which is before U. Kernel tries to read-ahead blocks N..U. Cdrom drive tries to read it, re-read it.. for some time. Finally, when all the N..U-1 blocks are read, kernel returns block number N (as requested) to an application, successefully. Now an app requests block number N+1, and kernel tries to read blocks N+1..U+1. Retrying again as in previous step. And so on, up to when an app requests block number U-1. And when, finally, it requests block U, it receives read error. So, kernel currentry tries to re-read the same failing block as many times as the current readahead value (256 (times?) by default). This whole process already killed my cdrom drive (I posted about it to LKML several months ago) - literally, the drive has fried, and does not work anymore. Ofcourse that problem was a bug in firmware (or whatever) of the drive *too*, but.. main problem with that is current readahead logic as described above. [/QUOTE] Which was confirmed by Jens Axboe <axboe@suse.de>: [QUOTE] For ide-cd, it tends do only end the first part of the request on a medium error. So you may see a lot of repeats :/ [/QUOTE] With this patch, retries are expected to be reduced from, say, 256, to 5. [akpm@osdl.org: cleanups] Signed-off-by: Wu Fengguang <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 20:48:43 +08:00
shrink_readahead_size_eio(file, ra);
return VM_FAULT_SIGBUS;
filemap: drop the mmap_sem for all blocking operations Currently we only drop the mmap_sem if there is contention on the page lock. The idea is that we issue readahead and then go to lock the page while it is under IO and we want to not hold the mmap_sem during the IO. The problem with this is the assumption that the readahead does anything. In the case that the box is under extreme memory or IO pressure we may end up not reading anything at all for readahead, which means we will end up reading in the page under the mmap_sem. Even if the readahead does something, it could get throttled because of io pressure on the system and the process is in a lower priority cgroup. Holding the mmap_sem while doing IO is problematic because it can cause system-wide priority inversions. Consider some large company that does a lot of web traffic. This large company has load balancing logic in it's core web server, cause some engineer thought this was a brilliant plan. This load balancing logic gets statistics from /proc about the system, which trip over processes mmap_sem for various reasons. Now the web server application is in a protected cgroup, but these other processes may not be, and if they are being throttled while their mmap_sem is held we'll stall, and cause this nice death spiral. Instead rework filemap fault path to drop the mmap sem at any point that we may do IO or block for an extended period of time. This includes while issuing readahead, locking the page, or needing to call ->readpage because readahead did not occur. Then once we have a fully uptodate page we can return with VM_FAULT_RETRY and come back again to find our nicely in-cache page that was gotten outside of the mmap_sem. This patch also adds a new helper for locking the page with the mmap_sem dropped. This doesn't make sense currently as generally speaking if the page is already locked it'll have been read in (unless there was an error) before it was unlocked. However a forthcoming patchset will change this with the ability to abort read-ahead bio's if necessary, making it more likely that we could contend for a page lock and still have a not uptodate page. This allows us to deal with this case by grabbing the lock and issuing the IO without the mmap_sem held, and then returning VM_FAULT_RETRY to come back around. [josef@toxicpanda.com: v6] Link: http://lkml.kernel.org/r/20181212152757.10017-1-josef@toxicpanda.com [kirill@shutemov.name: fix race in filemap_fault()] Link: http://lkml.kernel.org/r/20181228235106.okk3oastsnpxusxs@kshutemo-mobl1 [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20181211173801.29535-4-josef@toxicpanda.com Signed-off-by: Josef Bacik <josef@toxicpanda.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: syzbot+b437b5a429d680cf2217@syzkaller.appspotmail.com Cc: Dave Chinner <david@fromorbit.com> Cc: Rik van Riel <riel@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-14 02:44:22 +08:00
out_retry:
/*
* We dropped the mmap_sem, we need to return to the fault handler to
* re-find the vma and come back and find our hopefully still populated
* page.
*/
if (page)
put_page(page);
if (fpin)
fput(fpin);
return ret | VM_FAULT_RETRY;
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
}
EXPORT_SYMBOL(filemap_fault);
void filemap_map_pages(struct vm_fault *vmf,
pgoff_t start_pgoff, pgoff_t end_pgoff)
{
struct file *file = vmf->vma->vm_file;
struct address_space *mapping = file->f_mapping;
pgoff_t last_pgoff = start_pgoff;
unsigned long max_idx;
XA_STATE(xas, &mapping->i_pages, start_pgoff);
struct page *page;
rcu_read_lock();
xas_for_each(&xas, page, end_pgoff) {
if (xas_retry(&xas, page))
continue;
if (xa_is_value(page))
goto next;
/*
* Check for a locked page first, as a speculative
* reference may adversely influence page migration.
*/
if (PageLocked(page))
goto next;
if (!page_cache_get_speculative(page))
goto next;
/* Has the page moved or been split? */
if (unlikely(page != xas_reload(&xas)))
goto skip;
page = find_subpage(page, xas.xa_index);
if (!PageUptodate(page) ||
PageReadahead(page) ||
PageHWPoison(page))
goto skip;
if (!trylock_page(page))
goto skip;
if (page->mapping != mapping || !PageUptodate(page))
goto unlock;
max_idx = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE);
if (page->index >= max_idx)
goto unlock;
if (file->f_ra.mmap_miss > 0)
file->f_ra.mmap_miss--;
vmf->address += (xas.xa_index - last_pgoff) << PAGE_SHIFT;
if (vmf->pte)
vmf->pte += xas.xa_index - last_pgoff;
last_pgoff = xas.xa_index;
if (alloc_set_pte(vmf, NULL, page))
goto unlock;
unlock_page(page);
goto next;
unlock:
unlock_page(page);
skip:
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
next:
/* Huge page is mapped? No need to proceed. */
if (pmd_trans_huge(*vmf->pmd))
break;
}
rcu_read_unlock();
}
EXPORT_SYMBOL(filemap_map_pages);
vm_fault_t filemap_page_mkwrite(struct vm_fault *vmf)
{
struct page *page = vmf->page;
struct inode *inode = file_inode(vmf->vma->vm_file);
vm_fault_t ret = VM_FAULT_LOCKED;
sb_start_pagefault(inode->i_sb);
file_update_time(vmf->vma->vm_file);
lock_page(page);
if (page->mapping != inode->i_mapping) {
unlock_page(page);
ret = VM_FAULT_NOPAGE;
goto out;
}
/*
* We mark the page dirty already here so that when freeze is in
* progress, we are guaranteed that writeback during freezing will
* see the dirty page and writeprotect it again.
*/
set_page_dirty(page);
mm: only enforce stable page writes if the backing device requires it Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 08:42:51 +08:00
wait_for_stable_page(page);
out:
sb_end_pagefault(inode->i_sb);
return ret;
}
const struct vm_operations_struct generic_file_vm_ops = {
mm: merge populate and nopage into fault (fixes nonlinear) Nonlinear mappings are (AFAIKS) simply a virtual memory concept that encodes the virtual address -> file offset differently from linear mappings. ->populate is a layering violation because the filesystem/pagecache code should need to know anything about the virtual memory mapping. The hitch here is that the ->nopage handler didn't pass down enough information (ie. pgoff). But it is more logical to pass pgoff rather than have the ->nopage function calculate it itself anyway (because that's a similar layering violation). Having the populate handler install the pte itself is likewise a nasty thing to be doing. This patch introduces a new fault handler that replaces ->nopage and ->populate and (later) ->nopfn. Most of the old mechanism is still in place so there is a lot of duplication and nice cleanups that can be removed if everyone switches over. The rationale for doing this in the first place is that nonlinear mappings are subject to the pagefault vs invalidate/truncate race too, and it seemed stupid to duplicate the synchronisation logic rather than just consolidate the two. After this patch, MAP_NONBLOCK no longer sets up ptes for pages present in pagecache. Seems like a fringe functionality anyway. NOPAGE_REFAULT is removed. This should be implemented with ->fault, and no users have hit mainline yet. [akpm@linux-foundation.org: cleanup] [randy.dunlap@oracle.com: doc. fixes for readahead] [akpm@linux-foundation.org: build fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:46:59 +08:00
.fault = filemap_fault,
.map_pages = filemap_map_pages,
.page_mkwrite = filemap_page_mkwrite,
};
/* This is used for a general mmap of a disk file */
int generic_file_mmap(struct file * file, struct vm_area_struct * vma)
{
struct address_space *mapping = file->f_mapping;
if (!mapping->a_ops->readpage)
return -ENOEXEC;
file_accessed(file);
vma->vm_ops = &generic_file_vm_ops;
return 0;
}
/*
* This is for filesystems which do not implement ->writepage.
*/
int generic_file_readonly_mmap(struct file *file, struct vm_area_struct *vma)
{
if ((vma->vm_flags & VM_SHARED) && (vma->vm_flags & VM_MAYWRITE))
return -EINVAL;
return generic_file_mmap(file, vma);
}
#else
vm_fault_t filemap_page_mkwrite(struct vm_fault *vmf)
{
return VM_FAULT_SIGBUS;
}
int generic_file_mmap(struct file * file, struct vm_area_struct * vma)
{
return -ENOSYS;
}
int generic_file_readonly_mmap(struct file * file, struct vm_area_struct * vma)
{
return -ENOSYS;
}
#endif /* CONFIG_MMU */
EXPORT_SYMBOL(filemap_page_mkwrite);
EXPORT_SYMBOL(generic_file_mmap);
EXPORT_SYMBOL(generic_file_readonly_mmap);
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
static struct page *wait_on_page_read(struct page *page)
{
if (!IS_ERR(page)) {
wait_on_page_locked(page);
if (!PageUptodate(page)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
page = ERR_PTR(-EIO);
}
}
return page;
}
static struct page *do_read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *, struct page *),
void *data,
gfp_t gfp)
{
struct page *page;
int err;
repeat:
page = find_get_page(mapping, index);
if (!page) {
mm: remove __GFP_COLD As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 09:38:03 +08:00
page = __page_cache_alloc(gfp);
if (!page)
return ERR_PTR(-ENOMEM);
err = add_to_page_cache_lru(page, mapping, index, gfp);
if (unlikely(err)) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
if (err == -EEXIST)
goto repeat;
/* Presumably ENOMEM for xarray node */
return ERR_PTR(err);
}
filler:
if (filler)
err = filler(data, page);
else
err = mapping->a_ops->readpage(data, page);
if (err < 0) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
return ERR_PTR(err);
}
page = wait_on_page_read(page);
if (IS_ERR(page))
return page;
goto out;
}
if (PageUptodate(page))
goto out;
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read In the generic read paths the kernel looks up a page in the page cache and if it's up to date, it is used. If not, the page lock is acquired to wait for IO to complete and then check the page. If multiple processes are waiting on IO, they all serialise against the lock and duplicate the checks. This is unnecessary. The page lock in itself does not give any guarantees to the callers about the page state as it can be immediately truncated or reclaimed after the page is unlocked. It's sufficient to wait_on_page_locked and then continue if the page is up to date on wakeup. It is possible that a truncated but up-to-date page is returned but the reference taken during read prevents it disappearing underneath the caller and the data is still valid if PageUptodate. The overall impact is small as even if processes serialise on the lock, the lock section is tiny once the IO is complete. Profiles indicated that unlock_page and friends are generally a tiny portion of a read-intensive workload. An artificial test was created that had instances of dd access a cache-cold file on an ext4 filesystem and measure how long the read took. paralleldd 4.4.0 4.4.0 vanilla avoidlock Amean Elapsd-1 5.28 ( 0.00%) 5.15 ( 2.50%) Amean Elapsd-4 5.29 ( 0.00%) 5.17 ( 2.12%) Amean Elapsd-7 5.28 ( 0.00%) 5.18 ( 1.78%) Amean Elapsd-12 5.20 ( 0.00%) 5.33 ( -2.50%) Amean Elapsd-21 5.14 ( 0.00%) 5.21 ( -1.41%) Amean Elapsd-30 5.30 ( 0.00%) 5.12 ( 3.38%) Amean Elapsd-48 5.78 ( 0.00%) 5.42 ( 6.21%) Amean Elapsd-79 6.78 ( 0.00%) 6.62 ( 2.46%) Amean Elapsd-110 9.09 ( 0.00%) 8.99 ( 1.15%) Amean Elapsd-128 10.60 ( 0.00%) 10.43 ( 1.66%) The impact is small but intuitively, it makes sense to avoid unnecessary calls to lock_page. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:39 +08:00
/*
* Page is not up to date and may be locked due one of the following
* case a: Page is being filled and the page lock is held
* case b: Read/write error clearing the page uptodate status
* case c: Truncation in progress (page locked)
* case d: Reclaim in progress
*
* Case a, the page will be up to date when the page is unlocked.
* There is no need to serialise on the page lock here as the page
* is pinned so the lock gives no additional protection. Even if the
* the page is truncated, the data is still valid if PageUptodate as
* it's a race vs truncate race.
* Case b, the page will not be up to date
* Case c, the page may be truncated but in itself, the data may still
* be valid after IO completes as it's a read vs truncate race. The
* operation must restart if the page is not uptodate on unlock but
* otherwise serialising on page lock to stabilise the mapping gives
* no additional guarantees to the caller as the page lock is
* released before return.
* Case d, similar to truncation. If reclaim holds the page lock, it
* will be a race with remove_mapping that determines if the mapping
* is valid on unlock but otherwise the data is valid and there is
* no need to serialise with page lock.
*
* As the page lock gives no additional guarantee, we optimistically
* wait on the page to be unlocked and check if it's up to date and
* use the page if it is. Otherwise, the page lock is required to
* distinguish between the different cases. The motivation is that we
* avoid spurious serialisations and wakeups when multiple processes
* wait on the same page for IO to complete.
*/
wait_on_page_locked(page);
if (PageUptodate(page))
goto out;
/* Distinguish between all the cases under the safety of the lock */
lock_page(page);
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read In the generic read paths the kernel looks up a page in the page cache and if it's up to date, it is used. If not, the page lock is acquired to wait for IO to complete and then check the page. If multiple processes are waiting on IO, they all serialise against the lock and duplicate the checks. This is unnecessary. The page lock in itself does not give any guarantees to the callers about the page state as it can be immediately truncated or reclaimed after the page is unlocked. It's sufficient to wait_on_page_locked and then continue if the page is up to date on wakeup. It is possible that a truncated but up-to-date page is returned but the reference taken during read prevents it disappearing underneath the caller and the data is still valid if PageUptodate. The overall impact is small as even if processes serialise on the lock, the lock section is tiny once the IO is complete. Profiles indicated that unlock_page and friends are generally a tiny portion of a read-intensive workload. An artificial test was created that had instances of dd access a cache-cold file on an ext4 filesystem and measure how long the read took. paralleldd 4.4.0 4.4.0 vanilla avoidlock Amean Elapsd-1 5.28 ( 0.00%) 5.15 ( 2.50%) Amean Elapsd-4 5.29 ( 0.00%) 5.17 ( 2.12%) Amean Elapsd-7 5.28 ( 0.00%) 5.18 ( 1.78%) Amean Elapsd-12 5.20 ( 0.00%) 5.33 ( -2.50%) Amean Elapsd-21 5.14 ( 0.00%) 5.21 ( -1.41%) Amean Elapsd-30 5.30 ( 0.00%) 5.12 ( 3.38%) Amean Elapsd-48 5.78 ( 0.00%) 5.42 ( 6.21%) Amean Elapsd-79 6.78 ( 0.00%) 6.62 ( 2.46%) Amean Elapsd-110 9.09 ( 0.00%) 8.99 ( 1.15%) Amean Elapsd-128 10.60 ( 0.00%) 10.43 ( 1.66%) The impact is small but intuitively, it makes sense to avoid unnecessary calls to lock_page. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:39 +08:00
/* Case c or d, restart the operation */
if (!page->mapping) {
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
goto repeat;
}
mm: filemap: avoid unnecessary calls to lock_page when waiting for IO to complete during a read In the generic read paths the kernel looks up a page in the page cache and if it's up to date, it is used. If not, the page lock is acquired to wait for IO to complete and then check the page. If multiple processes are waiting on IO, they all serialise against the lock and duplicate the checks. This is unnecessary. The page lock in itself does not give any guarantees to the callers about the page state as it can be immediately truncated or reclaimed after the page is unlocked. It's sufficient to wait_on_page_locked and then continue if the page is up to date on wakeup. It is possible that a truncated but up-to-date page is returned but the reference taken during read prevents it disappearing underneath the caller and the data is still valid if PageUptodate. The overall impact is small as even if processes serialise on the lock, the lock section is tiny once the IO is complete. Profiles indicated that unlock_page and friends are generally a tiny portion of a read-intensive workload. An artificial test was created that had instances of dd access a cache-cold file on an ext4 filesystem and measure how long the read took. paralleldd 4.4.0 4.4.0 vanilla avoidlock Amean Elapsd-1 5.28 ( 0.00%) 5.15 ( 2.50%) Amean Elapsd-4 5.29 ( 0.00%) 5.17 ( 2.12%) Amean Elapsd-7 5.28 ( 0.00%) 5.18 ( 1.78%) Amean Elapsd-12 5.20 ( 0.00%) 5.33 ( -2.50%) Amean Elapsd-21 5.14 ( 0.00%) 5.21 ( -1.41%) Amean Elapsd-30 5.30 ( 0.00%) 5.12 ( 3.38%) Amean Elapsd-48 5.78 ( 0.00%) 5.42 ( 6.21%) Amean Elapsd-79 6.78 ( 0.00%) 6.62 ( 2.46%) Amean Elapsd-110 9.09 ( 0.00%) 8.99 ( 1.15%) Amean Elapsd-128 10.60 ( 0.00%) 10.43 ( 1.66%) The impact is small but intuitively, it makes sense to avoid unnecessary calls to lock_page. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16 05:55:39 +08:00
/* Someone else locked and filled the page in a very small window */
if (PageUptodate(page)) {
unlock_page(page);
goto out;
}
goto filler;
out:
mark_page_accessed(page);
return page;
}
/**
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
* read_cache_page - read into page cache, fill it if needed
* @mapping: the page's address_space
* @index: the page index
* @filler: function to perform the read
* @data: first arg to filler(data, page) function, often left as NULL
*
* Read into the page cache. If a page already exists, and PageUptodate() is
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
* not set, try to fill the page and wait for it to become unlocked.
*
* If the page does not get brought uptodate, return -EIO.
*
* Return: up to date page on success, ERR_PTR() on failure.
*/
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
struct page *read_cache_page(struct address_space *mapping,
pgoff_t index,
int (*filler)(void *, struct page *),
void *data)
{
return do_read_cache_page(mapping, index, filler, data,
mapping_gfp_mask(mapping));
}
mm: remove read_cache_page_async() This patch removes read_cache_page_async() which wasn't really needed anywhere and simplifies the code around it a bit. read_cache_page_async() is useful when we want to read a page into the cache without waiting for it to complete. This happens when the appropriate callback 'filler' doesn't complete its read operation and releases the page lock immediately, and instead queues a different completion routine to do that. This never actually happened anywhere in the code. read_cache_page_async() had 3 different callers: - read_cache_page() which is the sync version, it would just wait for the requested read to complete using wait_on_page_read(). - JFFS2 would call it from jffs2_gc_fetch_page(), but the filler function it supplied doesn't do any async reads, and would complete before the filler function returns - making it actually a sync read. - CRAMFS would call it using the read_mapping_page_async() wrapper, with a similar story to JFFS2 - the filler function doesn't do anything that reminds async reads and would always complete before the filler function returns. To sum it up, the code in mm/filemap.c never took advantage of having read_cache_page_async(). While there are filler callbacks that do async reads (such as the block one), we always called it with the read_cache_page(). This patch adds a mandatory wait for read to complete when adding a new page to the cache, and removes read_cache_page_async() and its wrappers. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-04 05:48:18 +08:00
EXPORT_SYMBOL(read_cache_page);
/**
* read_cache_page_gfp - read into page cache, using specified page allocation flags.
* @mapping: the page's address_space
* @index: the page index
* @gfp: the page allocator flags to use if allocating
*
* This is the same as "read_mapping_page(mapping, index, NULL)", but with
* any new page allocations done using the specified allocation flags.
*
* If the page does not get brought uptodate, return -EIO.
*
* Return: up to date page on success, ERR_PTR() on failure.
*/
struct page *read_cache_page_gfp(struct address_space *mapping,
pgoff_t index,
gfp_t gfp)
{
return do_read_cache_page(mapping, index, NULL, NULL, gfp);
}
EXPORT_SYMBOL(read_cache_page_gfp);
/*
* Don't operate on ranges the page cache doesn't support, and don't exceed the
* LFS limits. If pos is under the limit it becomes a short access. If it
* exceeds the limit we return -EFBIG.
*/
static int generic_write_check_limits(struct file *file, loff_t pos,
loff_t *count)
{
struct inode *inode = file->f_mapping->host;
loff_t max_size = inode->i_sb->s_maxbytes;
loff_t limit = rlimit(RLIMIT_FSIZE);
if (limit != RLIM_INFINITY) {
if (pos >= limit) {
send_sig(SIGXFSZ, current, 0);
return -EFBIG;
}
*count = min(*count, limit - pos);
}
if (!(file->f_flags & O_LARGEFILE))
max_size = MAX_NON_LFS;
if (unlikely(pos >= max_size))
return -EFBIG;
*count = min(*count, max_size - pos);
return 0;
}
/*
* Performs necessary checks before doing a write
*
* Can adjust writing position or amount of bytes to write.
* Returns appropriate error code that caller should return or
* zero in case that write should be allowed.
*/
inline ssize_t generic_write_checks(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
loff_t count;
int ret;
if (IS_SWAPFILE(inode))
return -ETXTBSY;
if (!iov_iter_count(from))
return 0;
/* FIXME: this is for backwards compatibility with 2.4 */
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
if ((iocb->ki_flags & IOCB_NOWAIT) && !(iocb->ki_flags & IOCB_DIRECT))
return -EINVAL;
count = iov_iter_count(from);
ret = generic_write_check_limits(file, iocb->ki_pos, &count);
if (ret)
return ret;
iov_iter_truncate(from, count);
return iov_iter_count(from);
}
EXPORT_SYMBOL(generic_write_checks);
/*
* Performs necessary checks before doing a clone.
*
* Can adjust amount of bytes to clone via @req_count argument.
* Returns appropriate error code that caller should return or
* zero in case the clone should be allowed.
*/
int generic_remap_checks(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t *req_count, unsigned int remap_flags)
{
struct inode *inode_in = file_in->f_mapping->host;
struct inode *inode_out = file_out->f_mapping->host;
uint64_t count = *req_count;
uint64_t bcount;
loff_t size_in, size_out;
loff_t bs = inode_out->i_sb->s_blocksize;
int ret;
/* The start of both ranges must be aligned to an fs block. */
if (!IS_ALIGNED(pos_in, bs) || !IS_ALIGNED(pos_out, bs))
return -EINVAL;
/* Ensure offsets don't wrap. */
if (pos_in + count < pos_in || pos_out + count < pos_out)
return -EINVAL;
size_in = i_size_read(inode_in);
size_out = i_size_read(inode_out);
/* Dedupe requires both ranges to be within EOF. */
if ((remap_flags & REMAP_FILE_DEDUP) &&
(pos_in >= size_in || pos_in + count > size_in ||
pos_out >= size_out || pos_out + count > size_out))
return -EINVAL;
/* Ensure the infile range is within the infile. */
if (pos_in >= size_in)
return -EINVAL;
count = min(count, size_in - (uint64_t)pos_in);
ret = generic_write_check_limits(file_out, pos_out, &count);
if (ret)
return ret;
/*
* If the user wanted us to link to the infile's EOF, round up to the
* next block boundary for this check.
*
* Otherwise, make sure the count is also block-aligned, having
* already confirmed the starting offsets' block alignment.
*/
if (pos_in + count == size_in) {
bcount = ALIGN(size_in, bs) - pos_in;
} else {
if (!IS_ALIGNED(count, bs))
count = ALIGN_DOWN(count, bs);
bcount = count;
}
/* Don't allow overlapped cloning within the same file. */
if (inode_in == inode_out &&
pos_out + bcount > pos_in &&
pos_out < pos_in + bcount)
return -EINVAL;
/*
* We shortened the request but the caller can't deal with that, so
* bounce the request back to userspace.
*/
if (*req_count != count && !(remap_flags & REMAP_FILE_CAN_SHORTEN))
return -EINVAL;
*req_count = count;
return 0;
}
/*
* Performs common checks before doing a file copy/clone
* from @file_in to @file_out.
*/
int generic_file_rw_checks(struct file *file_in, struct file *file_out)
{
struct inode *inode_in = file_inode(file_in);
struct inode *inode_out = file_inode(file_out);
/* Don't copy dirs, pipes, sockets... */
if (S_ISDIR(inode_in->i_mode) || S_ISDIR(inode_out->i_mode))
return -EISDIR;
if (!S_ISREG(inode_in->i_mode) || !S_ISREG(inode_out->i_mode))
return -EINVAL;
if (!(file_in->f_mode & FMODE_READ) ||
!(file_out->f_mode & FMODE_WRITE) ||
(file_out->f_flags & O_APPEND))
return -EBADF;
return 0;
}
/*
* Performs necessary checks before doing a file copy
*
* Can adjust amount of bytes to copy via @req_count argument.
* Returns appropriate error code that caller should return or
* zero in case the copy should be allowed.
*/
int generic_copy_file_checks(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
size_t *req_count, unsigned int flags)
{
struct inode *inode_in = file_inode(file_in);
struct inode *inode_out = file_inode(file_out);
uint64_t count = *req_count;
loff_t size_in;
int ret;
ret = generic_file_rw_checks(file_in, file_out);
if (ret)
return ret;
/* Don't touch certain kinds of inodes */
if (IS_IMMUTABLE(inode_out))
return -EPERM;
if (IS_SWAPFILE(inode_in) || IS_SWAPFILE(inode_out))
return -ETXTBSY;
/* Ensure offsets don't wrap. */
if (pos_in + count < pos_in || pos_out + count < pos_out)
return -EOVERFLOW;
/* Shorten the copy to EOF */
size_in = i_size_read(inode_in);
if (pos_in >= size_in)
count = 0;
else
count = min(count, size_in - (uint64_t)pos_in);
ret = generic_write_check_limits(file_out, pos_out, &count);
if (ret)
return ret;
/* Don't allow overlapped copying within the same file. */
if (inode_in == inode_out &&
pos_out + count > pos_in &&
pos_out < pos_in + count)
return -EINVAL;
*req_count = count;
return 0;
}
int pagecache_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
{
const struct address_space_operations *aops = mapping->a_ops;
return aops->write_begin(file, mapping, pos, len, flags,
pagep, fsdata);
}
EXPORT_SYMBOL(pagecache_write_begin);
int pagecache_write_end(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned copied,
struct page *page, void *fsdata)
{
const struct address_space_operations *aops = mapping->a_ops;
return aops->write_end(file, mapping, pos, len, copied, page, fsdata);
}
EXPORT_SYMBOL(pagecache_write_end);
/*
* Warn about a page cache invalidation failure during a direct I/O write.
*/
void dio_warn_stale_pagecache(struct file *filp)
{
static DEFINE_RATELIMIT_STATE(_rs, 86400 * HZ, DEFAULT_RATELIMIT_BURST);
char pathname[128];
struct inode *inode = file_inode(filp);
char *path;
errseq_set(&inode->i_mapping->wb_err, -EIO);
if (__ratelimit(&_rs)) {
path = file_path(filp, pathname, sizeof(pathname));
if (IS_ERR(path))
path = "(unknown)";
pr_crit("Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!\n");
pr_crit("File: %s PID: %d Comm: %.20s\n", path, current->pid,
current->comm);
}
}
ssize_t
generic_file_direct_write(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
loff_t pos = iocb->ki_pos;
ssize_t written;
size_t write_len;
pgoff_t end;
write_len = iov_iter_count(from);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end = (pos + write_len - 1) >> PAGE_SHIFT;
if (iocb->ki_flags & IOCB_NOWAIT) {
/* If there are pages to writeback, return */
if (filemap_range_has_page(inode->i_mapping, pos,
pos + write_len - 1))
return -EAGAIN;
} else {
written = filemap_write_and_wait_range(mapping, pos,
pos + write_len - 1);
if (written)
goto out;
}
/*
* After a write we want buffered reads to be sure to go to disk to get
* the new data. We invalidate clean cached page from the region we're
* about to write. We do this *before* the write so that we can return
VFS: fix dio write returning EIO when try_to_release_page fails Dio write returns EIO when try_to_release_page fails because bh is still referenced. The patch commit 3f31fddfa26b7594b44ff2b34f9a04ba409e0f91 Author: Mingming Cao <cmm@us.ibm.com> Date: Fri Jul 25 01:46:22 2008 -0700 jbd: fix race between free buffer and commit transaction was merged into 2.6.27-rc1, but I noticed that this patch is not enough to fix the race. I did fsstress test heavily to 2.6.27-rc1, and found that dio write still sometimes got EIO through this test. The patch above fixed race between freeing buffer(dio) and committing transaction(jbd) but I discovered that there is another race, freeing buffer(dio) and ext3/4_ordered_writepage. : background_writeout() ->write_cache_pages() ->ext3_ordered_writepage() walk_page_buffers() -> take a bh ref block_write_full_page() -> unlock_page : <- end_page_writeback : <- race! (dio write->try_to_release_page fails) walk_page_buffers() ->release a bh ref ext3_ordered_writepage holds bh ref and does unlock_page remaining taking a bh ref, so this causes the race and failure of try_to_release_page. To fix this race, I used the approach of falling back to buffered writes if try_to_release_page() fails on a page. [akpm@linux-foundation.org: cleanups] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-03 05:35:40 +08:00
* without clobbering -EIOCBQUEUED from ->direct_IO().
*/
fs: fix data invalidation in the cleancache during direct IO Patch series "Properly invalidate data in the cleancache", v2. We've noticed that after direct IO write, buffered read sometimes gets stale data which is coming from the cleancache. The reason for this is that some direct write hooks call call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero, so we may not invalidate data in the cleancache. Another odd thing is that we check only for ->nrpages and don't check for ->nrexceptional, but invalidate_inode_pages2[_range] also invalidates exceptional entries as well. So we invalidate exceptional entries only if ->nrpages != 0? This doesn't feel right. - Patch 1 fixes direct IO writes by removing ->nrpages check. - Patch 2 fixes similar case in invalidate_bdev(). Note: I only fixed conditional cleancache_invalidate_inode() here. Do we also need to add ->nrexceptional check in into invalidate_bdev()? - Patches 3-4: some optimizations. This patch (of 4): Some direct IO write fs hooks call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero. This can't be right, because invalidate_inode_pages2[_range]() also invalidate data in the cleancache via cleancache_invalidate_inode() call. So if page cache is empty but there is some data in the cleancache, buffered read after direct IO write would get stale data from the cleancache. Also it doesn't feel right to check only for ->nrpages because invalidate_inode_pages2[_range] invalidates exceptional entries as well. Fix this by calling invalidate_inode_pages2[_range]() regardless of nrpages state. Note: nfs,cifs,9p doesn't need similar fix because the never call cleancache_get_page() (nor directly, nor via mpage_readpage[s]()), so they are not affected by this bug. Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-2-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04 05:55:59 +08:00
written = invalidate_inode_pages2_range(mapping,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pos >> PAGE_SHIFT, end);
fs: fix data invalidation in the cleancache during direct IO Patch series "Properly invalidate data in the cleancache", v2. We've noticed that after direct IO write, buffered read sometimes gets stale data which is coming from the cleancache. The reason for this is that some direct write hooks call call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero, so we may not invalidate data in the cleancache. Another odd thing is that we check only for ->nrpages and don't check for ->nrexceptional, but invalidate_inode_pages2[_range] also invalidates exceptional entries as well. So we invalidate exceptional entries only if ->nrpages != 0? This doesn't feel right. - Patch 1 fixes direct IO writes by removing ->nrpages check. - Patch 2 fixes similar case in invalidate_bdev(). Note: I only fixed conditional cleancache_invalidate_inode() here. Do we also need to add ->nrexceptional check in into invalidate_bdev()? - Patches 3-4: some optimizations. This patch (of 4): Some direct IO write fs hooks call invalidate_inode_pages2[_range]() conditionally iff mapping->nrpages is not zero. This can't be right, because invalidate_inode_pages2[_range]() also invalidate data in the cleancache via cleancache_invalidate_inode() call. So if page cache is empty but there is some data in the cleancache, buffered read after direct IO write would get stale data from the cleancache. Also it doesn't feel right to check only for ->nrpages because invalidate_inode_pages2[_range] invalidates exceptional entries as well. Fix this by calling invalidate_inode_pages2[_range]() regardless of nrpages state. Note: nfs,cifs,9p doesn't need similar fix because the never call cleancache_get_page() (nor directly, nor via mpage_readpage[s]()), so they are not affected by this bug. Fixes: c515e1fd361c ("mm/fs: add hooks to support cleancache") Link: http://lkml.kernel.org/r/20170424164135.22350-2-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexey Kuznetsov <kuznet@virtuozzo.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04 05:55:59 +08:00
/*
* If a page can not be invalidated, return 0 to fall back
* to buffered write.
*/
if (written) {
if (written == -EBUSY)
return 0;
goto out;
}
written = mapping->a_ops->direct_IO(iocb, from);
/*
* Finally, try again to invalidate clean pages which might have been
* cached by non-direct readahead, or faulted in by get_user_pages()
* if the source of the write was an mmap'ed region of the file
* we're writing. Either one is a pretty crazy thing to do,
* so we don't support it 100%. If this invalidation
* fails, tough, the write still worked...
*
* Most of the time we do not need this since dio_complete() will do
* the invalidation for us. However there are some file systems that
* do not end up with dio_complete() being called, so let's not break
* them by removing it completely.
*
* Noticeable example is a blkdev_direct_IO().
*
* Skip invalidation for async writes or if mapping has no pages.
*/
if (written > 0 && mapping->nrpages &&
invalidate_inode_pages2_range(mapping, pos >> PAGE_SHIFT, end))
dio_warn_stale_pagecache(file);
if (written > 0) {
pos += written;
write_len -= written;
if (pos > i_size_read(inode) && !S_ISBLK(inode->i_mode)) {
i_size_write(inode, pos);
mark_inode_dirty(inode);
}
iocb->ki_pos = pos;
}
iov_iter_revert(from, write_len - iov_iter_count(from));
out:
return written;
}
EXPORT_SYMBOL(generic_file_direct_write);
/*
* Find or create a page at the given pagecache position. Return the locked
* page. This function is specifically for buffered writes.
*/
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05 04:00:53 +08:00
struct page *grab_cache_page_write_begin(struct address_space *mapping,
pgoff_t index, unsigned flags)
{
struct page *page;
mm: filemap: only do access activations on reads Andres observed that his database workload is struggling with the transaction journal creating pressure on frequently read pages. Access patterns like transaction journals frequently write the same pages over and over, but in the majority of cases those pages are never read back. There are no caching benefits to be had for those pages, so activating them and having them put pressure on pages that do benefit from caching is a bad choice. Leave page activations to read accesses and don't promote pages based on writes alone. It could be said that partially written pages do contain cache-worthy data, because even if *userspace* does not access the unwritten part, the kernel still has to read it from the filesystem for correctness. However, a counter argument is that these pages enjoy at least *some* protection over other inactive file pages through the writeback cache, in the sense that dirty pages are written back with a delay and cache reclaim leaves them alone until they have been written back to disk. Should that turn out to be insufficient and we see increased read IO from partial writes under memory pressure, we can always go back and update grab_cache_page_write_begin() to take (pos, len) so that it can tell partial writes from pages that don't need partial reads. But for now, keep it simple. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Andres Freund <andres@anarazel.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-21 07:56:28 +08:00
int fgp_flags = FGP_LOCK|FGP_WRITE|FGP_CREAT;
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05 04:00:53 +08:00
if (flags & AOP_FLAG_NOFS)
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
fgp_flags |= FGP_NOFS;
page = pagecache_get_page(mapping, index, fgp_flags,
mapping_gfp_mask(mapping));
mm: remove likely() from grab_cache_page_write_begin() Running the annotated branch profiler on a box doing average work (firefox, evolution, xchat, distcc farm), the likely() used in grab_cache_page_write_begin() was incorrect most of the time: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 1924262 71332401 97 grab_cache_page_write_begin filemap.c 2206 Adding a trace_printk() and running the function tracer limited to just this function I can see: gconfd-2-2696 [000] 4467.268935: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=7 gconfd-2-2696 [000] 4467.268946: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268947: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=8 gconfd-2-2696 [000] 4467.268959: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268960: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=9 gconfd-2-2696 [000] 4467.268972: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268973: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=10 gconfd-2-2696 [000] 4467.268991: grab_cache_page_write_begin <-ext3_write_begin gconfd-2-2696 [000] 4467.268992: grab_cache_page_write_begin: page= (null) mapping=ffff8800676a9460 index=11 gconfd-2-2696 [000] 4467.269005: grab_cache_page_write_begin <-ext3_write_begin Which shows that a lot of calls from ext3_write_begin will result in the page returned by "find_lock_page" will be NULL. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14 07:46:18 +08:00
if (page)
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
wait_for_stable_page(page);
return page;
}
fs: symlink write_begin allocation context fix With the write_begin/write_end aops, page_symlink was broken because it could no longer pass a GFP_NOFS type mask into the point where the allocations happened. They are done in write_begin, which would always assume that the filesystem can be entered from reclaim. This bug could cause filesystem deadlocks. The funny thing with having a gfp_t mask there is that it doesn't really allow the caller to arbitrarily tinker with the context in which it can be called. It couldn't ever be GFP_ATOMIC, for example, because it needs to take the page lock. The only thing any callers care about is __GFP_FS anyway, so turn that into a single flag. Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on this flag in their write_begin function. Change __grab_cache_page to accept a nofs argument as well, to honour that flag (while we're there, change the name to grab_cache_page_write_begin which is more instructive and does away with random leading underscores). This is really a more flexible way to go in the end anyway -- if a filesystem happens to want any extra allocations aside from the pagecache ones in ints write_begin function, it may now use GFP_KERNEL (rather than GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a random example). [kosaki.motohiro@jp.fujitsu.com: fix ubifs] [kosaki.motohiro@jp.fujitsu.com: fix fuse] Signed-off-by: Nick Piggin <npiggin@suse.de> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Cleaned up the calling convention: just pass in the AOP flags untouched to the grab_cache_page_write_begin() function. That just simplifies everybody, and may even allow future expansion of the logic. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05 04:00:53 +08:00
EXPORT_SYMBOL(grab_cache_page_write_begin);
ssize_t generic_perform_write(struct file *file,
struct iov_iter *i, loff_t pos)
{
struct address_space *mapping = file->f_mapping;
const struct address_space_operations *a_ops = mapping->a_ops;
long status = 0;
ssize_t written = 0;
unsigned int flags = 0;
do {
struct page *page;
unsigned long offset; /* Offset into pagecache page */
unsigned long bytes; /* Bytes to write to page */
size_t copied; /* Bytes copied from user */
void *fsdata;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
offset = (pos & (PAGE_SIZE - 1));
bytes = min_t(unsigned long, PAGE_SIZE - offset,
iov_iter_count(i));
again:
/*
* Bring in the user page that we will copy from _first_.
* Otherwise there's a nasty deadlock on copying from the
* same page as we're writing to, without it being marked
* up-to-date.
*
* Not only is this an optimisation, but it is also required
* to check that the address is actually valid, when atomic
* usercopies are used, below.
*/
if (unlikely(iov_iter_fault_in_readable(i, bytes))) {
status = -EFAULT;
break;
}
if (fatal_signal_pending(current)) {
status = -EINTR;
break;
}
status = a_ops->write_begin(file, mapping, pos, bytes, flags,
&page, &fsdata);
mm: non-atomically mark page accessed during page cache allocation where possible aops->write_begin may allocate a new page and make it visible only to have mark_page_accessed called almost immediately after. Once the page is visible the atomic operations are necessary which is noticable overhead when writing to an in-memory filesystem like tmpfs but should also be noticable with fast storage. The objective of the patch is to initialse the accessed information with non-atomic operations before the page is visible. The bulk of filesystems directly or indirectly use grab_cache_page_write_begin or find_or_create_page for the initial allocation of a page cache page. This patch adds an init_page_accessed() helper which behaves like the first call to mark_page_accessed() but may called before the page is visible and can be done non-atomically. The primary APIs of concern in this care are the following and are used by most filesystems. find_get_page find_lock_page find_or_create_page grab_cache_page_nowait grab_cache_page_write_begin All of them are very similar in detail to the patch creates a core helper pagecache_get_page() which takes a flags parameter that affects its behavior such as whether the page should be marked accessed or not. Then old API is preserved but is basically a thin wrapper around this core function. Each of the filesystems are then updated to avoid calling mark_page_accessed when it is known that the VM interfaces have already done the job. There is a slight snag in that the timing of the mark_page_accessed() has now changed so in rare cases it's possible a page gets to the end of the LRU as PageReferenced where as previously it might have been repromoted. This is expected to be rare but it's worth the filesystem people thinking about it in case they see a problem with the timing change. It is also the case that some filesystems may be marking pages accessed that previously did not but it makes sense that filesystems have consistent behaviour in this regard. The test case used to evaulate this is a simple dd of a large file done multiple times with the file deleted on each iterations. The size of the file is 1/10th physical memory to avoid dirty page balancing. In the async case it will be possible that the workload completes without even hitting the disk and will have variable results but highlight the impact of mark_page_accessed for async IO. The sync results are expected to be more stable. The exception is tmpfs where the normal case is for the "IO" to not hit the disk. The test machine was single socket and UMA to avoid any scheduling or NUMA artifacts. Throughput and wall times are presented for sync IO, only wall times are shown for async as the granularity reported by dd and the variability is unsuitable for comparison. As async results were variable do to writback timings, I'm only reporting the maximum figures. The sync results were stable enough to make the mean and stddev uninteresting. The performance results are reported based on a run with no profiling. Profile data is based on a separate run with oprofile running. async dd 3.15.0-rc3 3.15.0-rc3 vanilla accessed-v2 ext3 Max elapsed 13.9900 ( 0.00%) 11.5900 ( 17.16%) tmpfs Max elapsed 0.5100 ( 0.00%) 0.4900 ( 3.92%) btrfs Max elapsed 12.8100 ( 0.00%) 12.7800 ( 0.23%) ext4 Max elapsed 18.6000 ( 0.00%) 13.3400 ( 28.28%) xfs Max elapsed 12.5600 ( 0.00%) 2.0900 ( 83.36%) The XFS figure is a bit strange as it managed to avoid a worst case by sheer luck but the average figures looked reasonable. samples percentage ext3 86107 0.9783 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext3 23833 0.2710 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext3 5036 0.0573 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed ext4 64566 0.8961 vmlinux-3.15.0-rc4-vanilla mark_page_accessed ext4 5322 0.0713 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed ext4 2869 0.0384 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 62126 1.7675 vmlinux-3.15.0-rc4-vanilla mark_page_accessed xfs 1904 0.0554 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed xfs 103 0.0030 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed btrfs 10655 0.1338 vmlinux-3.15.0-rc4-vanilla mark_page_accessed btrfs 2020 0.0273 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed btrfs 587 0.0079 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed tmpfs 59562 3.2628 vmlinux-3.15.0-rc4-vanilla mark_page_accessed tmpfs 1210 0.0696 vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed tmpfs 94 0.0054 vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed [akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Tested-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05 07:10:31 +08:00
if (unlikely(status < 0))
break;
if (mapping_writably_mapped(mapping))
flush_dcache_page(page);
copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes);
flush_dcache_page(page);
status = a_ops->write_end(file, mapping, pos, bytes, copied,
page, fsdata);
if (unlikely(status < 0))
break;
copied = status;
cond_resched();
iov_iter_advance(i, copied);
if (unlikely(copied == 0)) {
/*
* If we were unable to copy any data at all, we must
* fall back to a single segment length write.
*
* If we didn't fallback here, we could livelock
* because not all segments in the iov can be copied at
* once without a pagefault.
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
bytes = min_t(unsigned long, PAGE_SIZE - offset,
iov_iter_single_seg_count(i));
goto again;
}
pos += copied;
written += copied;
balance_dirty_pages_ratelimited(mapping);
} while (iov_iter_count(i));
return written ? written : status;
}
EXPORT_SYMBOL(generic_perform_write);
/**
* __generic_file_write_iter - write data to a file
* @iocb: IO state structure (file, offset, etc.)
* @from: iov_iter with data to write
*
* This function does all the work needed for actually writing data to a
* file. It does all basic checks, removes SUID from the file, updates
* modification times and calls proper subroutines depending on whether we
* do direct IO or a standard buffered write.
*
* It expects i_mutex to be grabbed unless we work on a block device or similar
* object which does not need locking at all.
*
* This function does *not* take care of syncing data in case of O_SYNC write.
* A caller has to handle it. This is mainly due to the fact that we want to
* avoid syncing under i_mutex.
*
* Return:
* * number of bytes written, even for truncated writes
* * negative error code if no data has been written at all
*/
ssize_t __generic_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct address_space * mapping = file->f_mapping;
struct inode *inode = mapping->host;
ssize_t written = 0;
ssize_t err;
ssize_t status;
/* We can write back this queue in page reclaim */
current->backing_dev_info = inode_to_bdi(inode);
err = file_remove_privs(file);
if (err)
goto out;
err = file_update_time(file);
if (err)
goto out;
if (iocb->ki_flags & IOCB_DIRECT) {
loff_t pos, endbyte;
written = generic_file_direct_write(iocb, from);
/*
* If the write stopped short of completing, fall back to
* buffered writes. Some filesystems do this for writes to
* holes, for example. For DAX files, a buffered write will
* not succeed (even if it did, DAX does not handle dirty
* page-cache pages correctly).
*/
if (written < 0 || !iov_iter_count(from) || IS_DAX(inode))
goto out;
status = generic_perform_write(file, from, pos = iocb->ki_pos);
/*
* If generic_perform_write() returned a synchronous error
* then we want to return the number of bytes which were
* direct-written, or the error code if that was zero. Note
* that this differs from normal direct-io semantics, which
* will return -EFOO even if some bytes were written.
*/
if (unlikely(status < 0)) {
err = status;
goto out;
}
/*
* We need to ensure that the page cache pages are written to
* disk and invalidated to preserve the expected O_DIRECT
* semantics.
*/
endbyte = pos + status - 1;
err = filemap_write_and_wait_range(mapping, pos, endbyte);
if (err == 0) {
iocb->ki_pos = endbyte + 1;
written += status;
invalidate_mapping_pages(mapping,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pos >> PAGE_SHIFT,
endbyte >> PAGE_SHIFT);
} else {
/*
* We don't know how much we wrote, so just return
* the number of bytes which were direct-written
*/
}
} else {
written = generic_perform_write(file, from, iocb->ki_pos);
if (likely(written > 0))
iocb->ki_pos += written;
}
out:
current->backing_dev_info = NULL;
return written ? written : err;
}
EXPORT_SYMBOL(__generic_file_write_iter);
/**
* generic_file_write_iter - write data to a file
* @iocb: IO state structure
* @from: iov_iter with data to write
*
* This is a wrapper around __generic_file_write_iter() to be used by most
* filesystems. It takes care of syncing the file in case of O_SYNC file
* and acquires i_mutex as needed.
* Return:
* * negative error code if no data has been written at all of
* vfs_fsync_range() failed for a synchronous write
* * number of bytes written, even for truncated writes
*/
ssize_t generic_file_write_iter(struct kiocb *iocb, struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
ssize_t ret;
inode_lock(inode);
ret = generic_write_checks(iocb, from);
if (ret > 0)
ret = __generic_file_write_iter(iocb, from);
inode_unlock(inode);
if (ret > 0)
ret = generic_write_sync(iocb, ret);
return ret;
}
EXPORT_SYMBOL(generic_file_write_iter);
/**
* try_to_release_page() - release old fs-specific metadata on a page
*
* @page: the page which the kernel is trying to free
* @gfp_mask: memory allocation flags (and I/O mode)
*
* The address_space is to try to release any data against the page
* (presumably at page->private).
*
* This may also be called if PG_fscache is set on a page, indicating that the
* page is known to the local caching routines.
*
* The @gfp_mask argument specifies whether I/O may be performed to release
* this page (__GFP_IO), and whether the call may block (__GFP_RECLAIM & __GFP_FS).
*
* Return: %1 if the release was successful, otherwise return zero.
*/
int try_to_release_page(struct page *page, gfp_t gfp_mask)
{
struct address_space * const mapping = page->mapping;
BUG_ON(!PageLocked(page));
if (PageWriteback(page))
return 0;
if (mapping && mapping->a_ops->releasepage)
return mapping->a_ops->releasepage(page, gfp_mask);
return try_to_free_buffers(page);
}
EXPORT_SYMBOL(try_to_release_page);