AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
3d5128c1de
kernel_optimize_test/kernel/irq/internals.h

504 lines
14 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* IRQ subsystem internal functions and variables:
genirq: Add internal state field to irq_desc That field will contain internal state information which is not going to be exposed to anything outside the core code - except via accessor functions. I'm tired of everyone fiddling in irq_desc.status. core_internal_state__do_not_mess_with_it is clear enough, annoying to type and easy to grep for. Offenders will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:19:55 +08:00
*
* Do not ever include this file from anything else than
* kernel/irq/. Do not even think about using any information outside
* of this file for your non core code.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
genirq: Distangle irq.h Move irq_desc and internal functions out of irq.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-01 22:03:45 +08:00
#include <linux/irqdesc.h>
genirq: Move kstat_incr_irqs_this_cpu() to core No more users outside the core code. Put it into the poison cabinet. That also gets rid of the linux/irq.h include in kernel_stat.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140223212739.124207133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-24 05:40:23 +08:00
#include <linux/kernel_stat.h>
genirq: Add runtime power management support for IRQ chips Some IRQ chips may be located in a power domain outside of the CPU subsystem and hence will require device specific runtime power management. In order to support such IRQ chips, add a pointer for a device structure to the irq_chip structure, and if this pointer is populated by the IRQ chip driver and CONFIG_PM is selected in the kernel configuration, then the pm_runtime_get/put APIs for this chip will be called when an IRQ is requested/freed, respectively. Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 23:12:29 +08:00
#include <linux/pm_runtime.h>
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
#include <linux/sched/clock.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
genirq: Prevent access beyond allocated_irqs bitmap Lars-Peter Clausen pointed out: I stumbled upon this while looking through the existing archs using SPARSE_IRQ. Even with SPARSE_IRQ the NR_IRQS is still the upper limit for the number of IRQs. Both PXA and MMP set NR_IRQS to IRQ_BOARD_START, with IRQ_BOARD_START being the number of IRQs used by the core. In various machine files the nr_irqs field of the ARM machine defintion struct is then set to "IRQ_BOARD_START + NR_BOARD_IRQS". As a result "nr_irqs" will greater then NR_IRQS which then again causes the "allocated_irqs" bitmap in the core irq code to be accessed beyond its size overwriting unrelated data. The core code really misses a sanity check there. This went unnoticed so far as by chance the compiler/linker places data behind that bitmap which gets initialized later on those affected platforms. So the obvious fix would be to add a sanity check in early_irq_init() and break all affected platforms. Though that check wants to be backported to stable as well, which will require to fix all known problematic platforms and probably some more yet not known ones as well. Lots of churn. A way simpler solution is to allocate a slightly larger bitmap and avoid the whole churn w/o breaking anything. Add a few warnings when an arch returns utter crap. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@kernel.org # .37 Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org>
2011-02-18 00:45:15 +08:00
#ifdef CONFIG_SPARSE_IRQ
# define IRQ_BITMAP_BITS (NR_IRQS + 8196)
#else
# define IRQ_BITMAP_BITS NR_IRQS
#endif
genirq: Add internal state field to irq_desc That field will contain internal state information which is not going to be exposed to anything outside the core code - except via accessor functions. I'm tired of everyone fiddling in irq_desc.status. core_internal_state__do_not_mess_with_it is clear enough, annoying to type and easy to grep for. Offenders will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:19:55 +08:00
#define istate core_internal_state__do_not_mess_with_it
module_param: make bool parameters really bool (core code) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 07:02:18 +08:00
extern bool noirqdebug;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
genirq: Allow migration of chained interrupts by installing default action When a CPU is offlined all interrupts that have an action are migrated to other still online CPUs. However, if the interrupt has chained handler installed this is not done. Chained handlers are used by GPIO drivers which support interrupts, for instance. When the affinity is not corrected properly we end up in situation where most interrupts are not arriving to the online CPUs anymore. For example on Intel Braswell system which has SD-card card detection signal connected to a GPIO the IO-APIC routing entries look like below after CPU1 is offlined: pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1) pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1) pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1) pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1) The problem here is that the destination mask still contains both CPUs even if CPU1 is already offline. This means that the IO-APIC still routes interrupts to the other CPU as well. We solve the problem by providing a default action for chained interrupts. This action allows the migration code to correct affinity (as it finds desc->action != NULL). Also make the default action handler to emit a warning if for some reason a chained handler ends up calling it. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-05 18:12:15 +08:00
extern struct irqaction chained_action;
genirq: Move irq thread flags to core Soleley used in core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-07 08:55:43 +08:00
/*
* Bits used by threaded handlers:
* IRQTF_RUNTHREAD - signals that the interrupt handler thread should run
* IRQTF_WARNED - warning "IRQ_WAKE_THREAD w/o thread_fn" has been printed
* IRQTF_AFFINITY - irq thread is requested to adjust affinity
genirq: Provide forced interrupt threading Add a commandline parameter "threadirqs" which forces all interrupts except those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to allow retrieving better debug data from crashing interrupt handlers. If "threadirqs" is not enabled on the kernel command line, then there is no impact in the interrupt hotpath. Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after marking the interrupts which cant be threaded IRQF_NO_THREAD. All interrupts which have IRQF_TIMER set are implict marked IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded. Forced threading hard interrupts also forces all soft interrupt handling into thread context. When enabled it might slow down things a bit, but for debugging problems in interrupt code it's a reasonable penalty as it does not immediately crash and burn the machine when an interrupt handler is buggy. Some test results on a Core2Duo machine: Cache cold run of: # time git grep irq_desc non-threaded threaded real 1m18.741s 1m19.061s user 0m1.874s 0m1.757s sys 0m5.843s 0m5.427s # iperf -c server non-threaded [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec threaded [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.772668648@linutronix.de>
2011-02-24 07:52:23 +08:00
* IRQTF_FORCED_THREAD - irq action is force threaded
genirq: Move irq thread flags to core Soleley used in core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-07 08:55:43 +08:00
*/
enum {
IRQTF_RUNTHREAD,
IRQTF_WARNED,
IRQTF_AFFINITY,
genirq: Provide forced interrupt threading Add a commandline parameter "threadirqs" which forces all interrupts except those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to allow retrieving better debug data from crashing interrupt handlers. If "threadirqs" is not enabled on the kernel command line, then there is no impact in the interrupt hotpath. Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after marking the interrupts which cant be threaded IRQF_NO_THREAD. All interrupts which have IRQF_TIMER set are implict marked IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded. Forced threading hard interrupts also forces all soft interrupt handling into thread context. When enabled it might slow down things a bit, but for debugging problems in interrupt code it's a reasonable penalty as it does not immediately crash and burn the machine when an interrupt handler is buggy. Some test results on a Core2Duo machine: Cache cold run of: # time git grep irq_desc non-threaded threaded real 1m18.741s 1m19.061s user 0m1.874s 0m1.757s sys 0m5.843s 0m5.427s # iperf -c server non-threaded [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec threaded [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec [ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110223234956.772668648@linutronix.de>
2011-02-24 07:52:23 +08:00
IRQTF_FORCED_THREAD,
genirq: Move irq thread flags to core Soleley used in core code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-07 08:55:43 +08:00
};
genirq: Move IRQ_AUTODETECT to internal state No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:25:25 +08:00
/*
genirq: Improve documentation to match current implementation Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiri Kosina <trivial@kernel.org> Link: http://lkml.kernel.org/r/1401178092-1228-3-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-27 16:07:37 +08:00
* Bit masks for desc->core_internal_state__do_not_mess_with_it
genirq: Move IRQ_AUTODETECT to internal state No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:25:25 +08:00
*
* IRQS_AUTODETECT - autodetection in progress
genirq: Move IRQ_SPURIOUS_DISABLED to core state No users outside. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:40:54 +08:00
* IRQS_SPURIOUS_DISABLED - was disabled due to spurious interrupt
* detection
genirq: Move IRQ_POLL_INPROGRESS to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:55:35 +08:00
* IRQS_POLL_INPROGRESS - polling in progress
genirq: Move IRQ_ONESHOT to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 04:02:10 +08:00
* IRQS_ONESHOT - irq is not unmasked in primary handler
genirq: Move IRQ_REPLAY and IRQ_WAITING to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 18:39:15 +08:00
* IRQS_REPLAY - irq is replayed
* IRQS_WAITING - irq is waiting
genirq: Move IRQ_PENDING flag to core Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 19:17:57 +08:00
* IRQS_PENDING - irq is pending and replayed later
genirq: Move IRQ_SUSPENDED to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 19:44:58 +08:00
* IRQS_SUSPENDED - irq is suspended
genirq: Provide basic NMI management for interrupt lines Add functionality to allocate interrupt lines that will deliver IRQs as Non-Maskable Interrupts. These allocations are only successful if the irqchip provides the necessary support and allows NMI delivery for the interrupt line. Interrupt lines allocated for NMI delivery must be enabled/disabled through enable_nmi/disable_nmi_nosync to keep their state consistent. To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded, the irqchip directly managing the IRQ must be the root irqchip and the irqchip cannot be behind a slow bus. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-31 22:53:58 +08:00
* IRQS_NMI - irq line is used to deliver NMIs
genirq: Move IRQ_AUTODETECT to internal state No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:25:25 +08:00
*/
enum {
IRQS_AUTODETECT = 0x00000001,
genirq: Move IRQ_SPURIOUS_DISABLED to core state No users outside. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:40:54 +08:00
IRQS_SPURIOUS_DISABLED = 0x00000002,
genirq: Move IRQ_POLL_INPROGRESS to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:55:35 +08:00
IRQS_POLL_INPROGRESS = 0x00000008,
genirq: Move IRQ_ONESHOT to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 04:02:10 +08:00
IRQS_ONESHOT = 0x00000020,
genirq: Move IRQ_REPLAY and IRQ_WAITING to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 18:39:15 +08:00
IRQS_REPLAY = 0x00000040,
IRQS_WAITING = 0x00000080,
genirq: Move IRQ_PENDING flag to core Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 19:17:57 +08:00
IRQS_PENDING = 0x00000200,
genirq: Move IRQ_SUSPENDED to core No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 19:44:58 +08:00
IRQS_SUSPENDED = 0x00000800,
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
IRQS_TIMINGS = 0x00001000,
genirq: Provide basic NMI management for interrupt lines Add functionality to allocate interrupt lines that will deliver IRQs as Non-Maskable Interrupts. These allocations are only successful if the irqchip provides the necessary support and allows NMI delivery for the interrupt line. Interrupt lines allocated for NMI delivery must be enabled/disabled through enable_nmi/disable_nmi_nosync to keep their state consistent. To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded, the irqchip directly managing the IRQ must be the root irqchip and the irqchip cannot be behind a slow bus. Signed-off-by: Julien Thierry <julien.thierry@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-01-31 22:53:58 +08:00
IRQS_NMI = 0x00002000,
genirq: Move IRQ_AUTODETECT to internal state No users outside of core Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-08 03:25:25 +08:00
};
genirq: Move debug code to separate header It'll break when I'm going to undefine the constants. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-10 03:44:21 +08:00
#include "debug.h"
#include "settings.h"
genirq: Remove irq arg from __irq_set_trigger() It's only required for debug output and can be retrieved from the irq descriptor if necessary. [ tglx: Split out from combo patch ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-24 01:47:29 +08:00
extern int __irq_set_trigger(struct irq_desc *desc, unsigned long flags);
genirq: Remove irq argument from __enable/__disable_irq() Solely used for debug output. Can be retrieved from irq descriptor if necessary. [ tglx: Split out from combo patch ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-24 01:52:36 +08:00
extern void __disable_irq(struct irq_desc *desc);
extern void __enable_irq(struct irq_desc *desc);
genirq: record trigger type Genirq hasn't previously recorded the trigger type used by any given IRQ, although some irq_chip support has done so. That data can be useful when troubleshooting. This patch records it in the relevant irq_desc.status bits, and improves consistency between the two driver-visible calls affected: - Make set_irq_type() usage match request_irq() usage: * IRQ_TYPE_NONE should be a NOP; succeed, so irq_chip methods won't have to handle that case any more (many do it wrong). * IRQ_TYPE_PROBE is ignored; any buggy out-of-tree callers might need to switch over to the real IRQ probing code. * emit the same diagnostics (from shared utility code) - Their kerneldoc now reflects usage: * request_irq() flags include IRQF_TRIGGER_* to specify active edge(s)/level ... docs previously omitted that * set_irq_type() is declared in <linux/irq.h> so callers should use the (bit-equivalent) IRQ_TYPE_* symbols there Also: adds a warning about shared IRQs that don't end up using the requested trigger mode; and fix an unrelated "sparse" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-02 05:46:18 +08:00
genirq: Add force argument to irq_startup() In order to handle managed interrupts gracefully on irq_startup() so they won't lose their assigned affinity, it's necessary to allow startups which keep the interrupts in managed shutdown state, if none of the assigend CPUs is online. This allows drivers to request interrupts w/o the CPUs being online, which avoid online/offline churn in drivers. Add a force argument which can override that decision and let only request_irq() and enable_irq() allow the managed shutdown handling. enable_irq() is required, because the interrupt might be requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which would then wreckage the assignment again. All other callers force startup and potentially break the assigned affinity. No functional change as this only adds the function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
2017-06-20 07:37:49 +08:00
#define IRQ_RESEND true
#define IRQ_NORESEND false
#define IRQ_START_FORCE true
#define IRQ_START_COND false
genirq: Separate activation and startup Activation of an interrupt and startup are currently a combo functionlity. That works so far, but upcoming changes require a strict separation because the activation can fail in future. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
2017-09-14 05:29:09 +08:00
extern int irq_activate(struct irq_desc *desc);
genirq: Make legacy autoprobing work again Meelis reported the following warning on a quad P3 HP NetServer museum piece: WARNING: CPU: 3 PID: 258 at kernel/irq/chip.c:244 __irq_startup+0x80/0x100 EIP: __irq_startup+0x80/0x100 irq_startup+0x7e/0x170 probe_irq_on+0x128/0x2b0 parport_irq_probe.constprop.18+0x8d/0x1af [parport_pc] parport_pc_probe_port+0xf11/0x1260 [parport_pc] parport_pc_init+0x78a/0xf10 [parport_pc] parport_parse_param.constprop.16+0xf0/0xf0 [parport_pc] do_one_initcall+0x45/0x1e0 This is caused by the rewrite of the irq activation/startup sequence which missed to convert a callsite in the irq legacy auto probing code. To fix this irq_activate_and_startup() needs to gain a return value so the pending logic can work proper. Fixes: c942cee46bba ("genirq: Separate activation and startup") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801301935410.1797@nanos
2018-01-31 02:36:32 +08:00
extern int irq_activate_and_startup(struct irq_desc *desc, bool resend);
genirq: Add force argument to irq_startup() In order to handle managed interrupts gracefully on irq_startup() so they won't lose their assigned affinity, it's necessary to allow startups which keep the interrupts in managed shutdown state, if none of the assigend CPUs is online. This allows drivers to request interrupts w/o the CPUs being online, which avoid online/offline churn in drivers. Add a force argument which can override that decision and let only request_irq() and enable_irq() allow the managed shutdown handling. enable_irq() is required, because the interrupt might be requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which would then wreckage the assignment again. All other callers force startup and potentially break the assigned affinity. No functional change as this only adds the function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
2017-06-20 07:37:49 +08:00
extern int irq_startup(struct irq_desc *desc, bool resend, bool force);
genirq: Consolidate startup/shutdown of interrupts Aside of duplicated code some of the startup/shutdown sites do not handle the MASKED/DISABLED flags and the depth field at all. Move that to a helper function and take care of it there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.787481468@linutronix.de>
2011-02-03 05:41:14 +08:00
extern void irq_shutdown(struct irq_desc *desc);
genirq: Delay deactivation in free_irq() When interrupts are shutdown, they are immediately deactivated in the irqdomain hierarchy. While this looks obviously correct there is a subtle issue: There might be an interrupt in flight when free_irq() is invoking the shutdown. This is properly handled at the irq descriptor / primary handler level, but the deactivation might completely disable resources which are required to acknowledge the interrupt. Split the shutdown code and deactivate the interrupt after synchronization in free_irq(). Fixup all other usage sites where this is not an issue to invoke the combined shutdown_and_deactivate() function instead. This still might be an issue if the interrupt in flight servicing is delayed on a remote CPU beyond the invocation of synchronize_irq(), but that cannot be handled at that level and needs to be handled in the synchronize_irq() context. Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
2019-06-28 19:11:49 +08:00
extern void irq_shutdown_and_deactivate(struct irq_desc *desc);
genirq: Consolidate disable/enable Create irq_disable/enable and use them to keep the flags consistent. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-03 19:27:44 +08:00
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
genirq: Add IRQCHIP_SET_TYPE_MASKED flag irq_chips, which require to mask the chip before changing the trigger type should set this flag. So the core takes care of it and the requirement for looking into desc->status in the chip goes away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de>
2011-02-10 20:16:14 +08:00
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
genirq: Add a new IRQCHIP_EOI_THREADED flag The flag is necessary for interrupt chips which require an ACK/EOI after the handler has run. In case of threaded handlers this needs to happen after the threaded handler has completed before the unmask of the interrupt. The flag is only unseful in combination with the handle_fasteoi_irq flow control handler. It can be combined with the flag IRQCHIP_EOI_IF_HANDLED, so the EOI is not issued when the interrupt is disabled or in progress. Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://lkml.kernel.org/r/1394733834-26839-2-git-send-email-hdegoede@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-14 02:03:51 +08:00
extern void unmask_threaded_irq(struct irq_desc *desc);
genirq: Consolidate startup/shutdown of interrupts Aside of duplicated code some of the startup/shutdown sites do not handle the MASKED/DISABLED flags and the depth field at all. Move that to a helper function and take care of it there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20110202212551.787481468@linutronix.de>
2011-02-03 05:41:14 +08:00
genirq: Replace reserve_irqs in core code We want to get rid of the public interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Tested-by: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140507154340.061990194@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-07 23:44:21 +08:00
#ifdef CONFIG_SPARSE_IRQ
static inline void irq_mark_irq(unsigned int irq) { }
#else
extern void irq_mark_irq(unsigned int irq);
#endif
genirq: Add optional hardware synchronization for shutdown free_irq() ensures that no hardware interrupt handler is executing on a different CPU before actually releasing resources and deactivating the interrupt completely in a domain hierarchy. But that does not catch the case where the interrupt is on flight at the hardware level but not yet serviced by the target CPU. That creates an interesing race condition: CPU 0 CPU 1 IRQ CHIP interrupt is raised sent to CPU1 Unable to handle immediately (interrupts off, deep idle delay) mask() ... free() shutdown() synchronize_irq() release_resources() do_IRQ() -> resources are not available That might be harmless and just trigger a spurious interrupt warning, but some interrupt chips might get into a wedged state. Utilize the existing irq_get_irqchip_state() callback for the synchronization in free_irq(). synchronize_hardirq() is not using this mechanism as it might actually deadlock unter certain conditions, e.g. when called with interrupts disabled and the target CPU is the one on which the synchronization is invoked. synchronize_irq() uses it because that function cannot be called from non preemtible contexts as it might sleep. No functional change intended and according to Marc the existing GIC implementations where the driver supports the callback should be able to cope with that core change. Famous last words. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
2019-06-28 19:11:51 +08:00
extern int __irq_get_irqchip_state(struct irq_data *data,
enum irqchip_irq_state which,
bool *state);
x86/irq: change irq_desc_alloc() to take node instead of cpu This simplifies the node awareness of the code. All our allocators only deal with a NUMA node ID locality not with CPU ids anyway - so there's no need to maintain (and transform) a CPU id all across the IRq layer. v2: keep move_irq_desc related [ Impact: cleanup, prepare IRQ code to be NUMA-aware ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@goop.org> LKML-Reference: <49F65536.2020300@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 09:00:38 +08:00
extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
irq: allocate irq_desc_ptrs array based on nr_irqs Impact: allocate irq_desc_ptrs in preparation for making it variable-sized. This addresses this memory usage bump when NR_CPUS bumped from 128 to 4096: 34816 +229376 264192 +658% irq_desc_ptrs(.data.read_mostly) The patch is split into two parts, the first simply allocates the irq_desc_ptrs array. Then next will deal with making it variable. This is only when CONFIG_SPARSE_IRQS=y. Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11 14:24:06 +08:00
genirq: Add untracked irq handler This adds a software irq handler for controllers that multiplex interrupts from multiple devices, but don't know which device generated the interrupt. For these devices, the irq handler that demuxes must check every action for every software irq using the same h/w irq in order to find out which device generated the interrupt. This will inevitably trigger spurious interrupt detection if we are noting the irq. The new irq handler does not track the handling for spurious interrupt detection. An irq that uses this also won't get stats tracked since it didn't generate the interrupt, nor added to randomness since they are not random. Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: Jon Derrick <jonathan.derrick@intel.com> Link: http://lkml.kernel.org/r/1466200821-29159-1-git-send-email-keith.busch@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-06-18 06:00:20 +08:00
irqreturn_t __handle_irq_event_percpu(struct irq_desc *desc, unsigned int *flags);
genirq: Remove the second parameter from handle_irq_event_percpu() Actually, we always use the first irq action of the @desc->action chain, so remove the second parameter from handle_irq_event_percpu() which makes the code more tidy. Signed-off-by: Huang Shijie <shijie.huang@arm.com> Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: peterz@infradead.org Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1441160695-19809-1-git-send-email-shijie.huang@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-09-02 10:24:55 +08:00
irqreturn_t handle_irq_event_percpu(struct irq_desc *desc);
genirq: Implement handle_irq_event() Core code replacement for the ugly camel case. It contains all the code which is shared in all handlers. clear status flags set INPROGRESS flag unlock call action chain note_interrupt lock clr INPROGRESS flag Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-07 08:08:49 +08:00
irqreturn_t handle_irq_event(struct irq_desc *desc);
genirq: Distangle irq.h Move irq_desc and internal functions out of irq.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-01 22:03:45 +08:00
/* Resending of interrupts :*/
genirq: Provide interrupt injection mechanism Error injection mechanisms need a half ways safe way to inject interrupts as invoking generic_handle_irq() or the actual device interrupt handler directly from e.g. a debugfs write is not guaranteed to be safe. On x86 generic_handle_irq() is unsafe due to the hardware trainwreck which is the base of x86 interrupt delivery and affinity management. Move the irq debugfs injection code into a separate function which can be used by error injection code as well. The implementation prevents at least that state is corrupted, but it cannot close a very tiny race window on x86 which might result in a stale and not serviced device interrupt under very unlikely circumstances. This is explicitly for debugging and testing and not for production use or abuse in random driver code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lkml.kernel.org/r/20200306130623.990928309@linutronix.de
2020-03-06 21:03:47 +08:00
int check_irq_resend(struct irq_desc *desc, bool inject);
genirq: Mark polled irqs and defer the real handler With the chip.end() function gone we might run into a situation where a poll call runs and the real interrupt comes in, sees IRQ_INPROGRESS and disables the line. That might be a perfect working one, which will then be masked forever. So mark them polled while the poll runs. When the real handler sees IRQ_INPROGRESS it checks the poll flag and waits for the polling to complete. Add the necessary amount of sanity checks to it to avoid deadlocks. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-07 17:34:30 +08:00
bool irq_wait_for_poll(struct irq_desc *desc);
genirq: Provide irq_wake_thread() In course of the sdhci/sdio discussion with Russell about killing the sdio kthread hackery we discovered the need to be able to wake an interrupt thread from software. The rationale for this is, that sdio hardware can lack proper interrupt support for certain features. So the driver needs to poll the status registers, but at the same time it needs to be woken up by an hardware interrupt. To be able to get rid of the home brewn kthread construct of sdio we need a way to wake an irq thread independent of an actual hardware interrupt. Provide an irq_wake_thread() function which wakes up the thread which is associated to a given dev_id. This allows sdio to invoke the irq thread from the hardware irq handler via the IRQ_WAKE_THREAD return value and provides a possibility to wake it via a timer for the polling scenarios. That allows to simplify the sdio logic significantly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Chris Ball <chris@printf.net> Acked-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140215003823.772565780@linutronix.de
2014-02-15 08:55:19 +08:00
void __irq_wake_thread(struct irq_desc *desc, struct irqaction *action);
genirq: Distangle irq.h Move irq_desc and internal functions out of irq.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-01 22:03:45 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_PROC_FS
irq: replace loop with nr_irqs with for_each_irq_desc There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 11:50:11 +08:00
extern void register_irq_proc(unsigned int irq, struct irq_desc *desc);
genirq: Prepare proc for real sparse irq support /proc/irq never removes any entries, but when irq descriptors can be freed for real this is necessary. Otherwise we'd reference a freed descriptor in /proc/irq/N Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-30 08:46:07 +08:00
extern void unregister_irq_proc(unsigned int irq, struct irq_desc *desc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void register_handler_proc(unsigned int irq, struct irqaction *action);
extern void unregister_handler_proc(unsigned int irq, struct irqaction *action);
#else
irq: replace loop with nr_irqs with for_each_irq_desc There are a handful of loops that go from 0 to nr_irqs and use get_irq_desc() on them. These would allocate all the irq_desc entries, regardless of the need for them. Use the smarter for_each_irq_desc() iterator that will only iterate over the present ones. v2: make sure arch without GENERIC_HARDIRQS work too Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-20 11:50:11 +08:00
static inline void register_irq_proc(unsigned int irq, struct irq_desc *desc) { }
genirq: Prepare proc for real sparse irq support /proc/irq never removes any entries, but when irq descriptors can be freed for real this is necessary. Otherwise we'd reference a freed descriptor in /proc/irq/N Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-30 08:46:07 +08:00
static inline void unregister_irq_proc(unsigned int irq, struct irq_desc *desc) { }
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static inline void register_handler_proc(unsigned int irq,
struct irqaction *action) { }
static inline void unregister_handler_proc(unsigned int irq,
struct irqaction *action) { }
#endif
genirq: Introduce IRQD_AFFINITY_MANAGED flag Interupts marked with this flag are excluded from user space interrupt affinity changes. Contrary to the IRQ_NO_BALANCING flag, the kernel internal affinity mechanism is not blocked. This flag will be used for multi-queue device interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 16:39:23 +08:00
extern bool irq_can_set_affinity_usr(unsigned int irq);
genirq: Delegate irq affinity setting to the irq thread irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might sleep, but irq_set_thread_affinity() is called with desc->lock held and can be called from hard interrupt context as well. The code has another bug as it does not hold a ref on the task struct as required by set_cpus_allowed_ptr(). Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time the thread runs it migrates itself. Solves all of the above problems nicely. Add kerneldoc to irq_set_thread_affinity() while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission>
2009-07-21 17:09:39 +08:00
extern void irq_set_thread_affinity(struct irq_desc *desc);
irq: only update affinity if ->set_affinity() is sucessfull irq_set_affinity() and move_masked_irq() try to assign affinity before calling chip set_affinity(). Some archs are assigning it in ->set_affinity() again. We do something like: cpumask_cpy(desc->affinity, mask); desc->chip->set_affinity(mask); But in the failure path, affinity should not be touched - otherwise we'll end up with a different affinity mask despite the failure to migrate the IRQ. So try to update the afffinity only if set_affinity returns with 0. Also call irq_set_thread_affinity accordingly. v2: update after "irq, x86: Remove IRQ_DISABLED check in process context IRQ move" v3: according to Ingo, change set_affinity() in irq_chip should return int. v4: update comments by removing moving irq_desc code. [ Impact: fix /proc/irq/*/smp_affinity setting corner case bug ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49F65509.60307@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 08:59:53 +08:00
genirq: Introduce irq_do_set_affinity() to reduce duplicated code All invocations of chip->irq_set_affinity() are doing the same return value checks. Let them all use a common function. [ tglx: removed the silly likely while at it ] Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Keping Chen <chenkeping@huawei.com> Link: http://lkml.kernel.org/r/1333120296-13563-3-git-send-email-jiang.liu@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-30 23:11:34 +08:00
extern int irq_do_set_affinity(struct irq_data *data,
const struct cpumask *dest, bool force);
genirq: Rename setup_affinity() to irq_setup_affinity() Rename it with a proper irq_ prefix and make it available for other files in the core code. Preparatory patch for moving the irq affinity setup around. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.928501004@linutronix.de
2017-06-20 07:37:22 +08:00
#ifdef CONFIG_SMP
extern int irq_setup_affinity(struct irq_desc *desc);
#else
static inline int irq_setup_affinity(struct irq_desc *desc) { return 0; }
#endif
genirq: Add buslock support Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:48 +08:00
/* Inline functions for support of irq chips on slow busses */
genirq: Provide compat handling for bus_lock/bus_sync_unlock Wrap the old chip functions for bus_lock/bus_sync_unlock until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121841.842536121@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 20:44:35 +08:00
static inline void chip_bus_lock(struct irq_desc *desc)
genirq: Add buslock support Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:48 +08:00
{
genirq: Provide compat handling for bus_lock/bus_sync_unlock Wrap the old chip functions for bus_lock/bus_sync_unlock until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121841.842536121@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 20:44:35 +08:00
if (unlikely(desc->irq_data.chip->irq_bus_lock))
desc->irq_data.chip->irq_bus_lock(&desc->irq_data);
genirq: Add buslock support Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:48 +08:00
}
genirq: Provide compat handling for bus_lock/bus_sync_unlock Wrap the old chip functions for bus_lock/bus_sync_unlock until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121841.842536121@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 20:44:35 +08:00
static inline void chip_bus_sync_unlock(struct irq_desc *desc)
genirq: Add buslock support Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:48 +08:00
{
genirq: Provide compat handling for bus_lock/bus_sync_unlock Wrap the old chip functions for bus_lock/bus_sync_unlock until the migration is complete and the old chip functions are removed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100927121841.842536121@linutronix.de> Reviewed-by: H. Peter Anvin <hpa@zytor.com> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-09-27 20:44:35 +08:00
if (unlikely(desc->irq_data.chip->irq_bus_sync_unlock))
desc->irq_data.chip->irq_bus_sync_unlock(&desc->irq_data);
genirq: Add buslock support Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The bus access needs to sleep and therefor cannot be called in atomic contexts. Some of the generic interrupt management functions like disable_irq(), enable_irq() ... call interrupt chip functions with the irq_desc->lock held and interrupts disabled. This does not work for such devices. Provide a separate synchronization mechanism for such interrupt chips. The irq_chip structure is extended by two optional functions (bus_lock and bus_sync_and_unlock). The idea is to serialize the bus access for those operations in the core code so that drivers which are behind that bus operated interrupt controller do not have to worry about it and just can use the normal interfaces. To achieve this we add two function pointers to the irq_chip: bus_lock and bus_sync_unlock. bus_lock() is called to serialize access to the interrupt controller bus. Now the core code can issue chip->mask/unmask ... commands without changing the fast path code at all. The chip implementation merily stores that information in a chip private data structure and returns. No bus interaction as these functions are called from atomic context. After that bus_sync_unlock() is called outside the atomic context. Now the chip implementation issues the bus commands, waits for completion and unlocks the interrupt controller bus. The irq_chip implementation as pseudo code: struct irq_chip_data { struct mutex mutex; unsigned int irq_offset; unsigned long mask; unsigned long mask_status; } static void bus_lock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); mutex_lock(&data->mutex); } static void mask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask |= (1 << irq); } static void unmask(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); irq -= data->irq_offset; data->mask &= ~(1 << irq); } static void bus_sync_unlock(unsigned int irq) { struct irq_chip_data *data = get_irq_desc_chip_data(irq); if (data->mask != data->mask_status) { do_bus_magic_to_set_mask(data->mask); data->mask_status = data->mask; } mutex_unlock(&data->mutex); } The device drivers can use request_threaded_irq, free_irq, disable_irq and enable_irq as usual with the only restriction that the calls need to come from non atomic context. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Trilok Soni <soni.trilok@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Brian Swetland <swetland@google.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: m.szyprowski@samsung.com Cc: t.fujak@samsung.com Cc: kyungmin.park@samsung.com, Cc: David Brownell <david-b@pacbell.net> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: arve@android.com Cc: Barry Song <21cnbao@gmail.com>
2009-08-13 18:17:48 +08:00
}
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
#define _IRQ_DESC_CHECK (1 << 0)
#define _IRQ_DESC_PERCPU (1 << 1)
#define IRQ_GET_DESC_CHECK_GLOBAL (_IRQ_DESC_CHECK)
#define IRQ_GET_DESC_CHECK_PERCPU (_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
genirq: Use a common macro to go through the actions list The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code. [ tglx: Renamed the macro ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1452765253-31148-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-14 17:54:13 +08:00
#define for_each_action_of_desc(desc, act) \
genirq: Fix for_each_action_of_desc() macro struct irq_desc does not have a member named "act". The correct name is "action". Currently, all users of this macro use an iterator named "action". If a different name is used, it will cause a build error. Fixes: f944b5a7aff0 ("genirq: Use a common macro to go through the actions list") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1502260341-28184-1-git-send-email-yamada.masahiro@socionext.com
2017-08-09 14:32:21 +08:00
for (act = desc->action; act; act = act->next)
genirq: Use a common macro to go through the actions list The irq code browses the list of actions differently to inspect the element one by one. Even if it is not a problem, for the sake of consistent code, provide a macro similar to for_each_irq_desc in order to have the same loop to go through the actions list and use it in the code. [ tglx: Renamed the macro ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1452765253-31148-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-14 17:54:13 +08:00
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
struct irq_desc *
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
unsigned int check);
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
void __irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags, bool bus);
static inline struct irq_desc *
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
irq_get_desc_buslock(unsigned int irq, unsigned long *flags, unsigned int check)
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
{
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
return __irq_get_desc_lock(irq, flags, true, check);
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
}
static inline void
irq_put_desc_busunlock(struct irq_desc *desc, unsigned long flags)
{
__irq_put_desc_unlock(desc, flags, true);
}
static inline struct irq_desc *
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
irq_get_desc_lock(unsigned int irq, unsigned long *flags, unsigned int check)
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
{
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-24 00:03:06 +08:00
return __irq_get_desc_lock(irq, flags, false, check);
genirq: Implement irq_get/put_desc_[bus]locked/unlock() Most of the managing functions get the irq descriptor and lock it - either with or without buslock. Instead of open coding this over and over provide a common function to do that. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-12 19:16:16 +08:00
}
static inline void
irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags)
{
__irq_put_desc_unlock(desc, flags, false);
}
irq: Privatize irq_common_data::state_use_accessors irq_common_data::state_use_accessors is not designed for public use. Therefore make it private so that people who write code accessing it directly will get blamed by sparse. Also #undef the macro __irqd_to_state after used in header files, so that the macro can't be misused. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-29 12:18:48 +08:00
#define __irqd_to_state(d) ACCESS_PRIVATE((d)->common, state_use_accessors)
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
static inline unsigned int irqd_get(struct irq_data *d)
{
return __irqd_to_state(d);
}
genirq: Add IRQ_MOVE_PENDING to irq_data.state chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-05 22:20:04 +08:00
/*
* Manipulation functions for irq_data.state
*/
static inline void irqd_set_move_pending(struct irq_data *d)
{
genirq: Introduce struct irq_common_data to host shared irq data With the introduction of hierarchy irqdomain, struct irq_data becomes per-chip instead of per-irq and there may be multiple irq_datas associated with the same irq. Some per-irq data stored in struct irq_data now may get duplicated into multiple irq_datas, and causes inconsistent view. So introduce struct irq_common_data to host per-irq common data and to achieve consistent view among irq_chips. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:12 +08:00
__irqd_to_state(d) |= IRQD_SETAFFINITY_PENDING;
genirq: Add IRQ_MOVE_PENDING to irq_data.state chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-05 22:20:04 +08:00
}
static inline void irqd_clr_move_pending(struct irq_data *d)
{
genirq: Introduce struct irq_common_data to host shared irq data With the introduction of hierarchy irqdomain, struct irq_data becomes per-chip instead of per-irq and there may be multiple irq_datas associated with the same irq. Some per-irq data stored in struct irq_data now may get duplicated into multiple irq_datas, and causes inconsistent view. So introduce struct irq_common_data to host per-irq common data and to achieve consistent view among irq_chips. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:12 +08:00
__irqd_to_state(d) &= ~IRQD_SETAFFINITY_PENDING;
genirq: Add IRQ_MOVE_PENDING to irq_data.state chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-05 22:20:04 +08:00
}
genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.state That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:11:03 +08:00
genirq: Introduce IRQD_MANAGED_SHUTDOWN Affinity managed interrupts should keep their assigned affinity accross CPU hotplug. To avoid magic hackery in device drivers, the core code shall manage them transparently. This will set these interrupts into a managed shutdown state when the last CPU of the assigned affinity mask goes offline. The interrupt will be restarted when one of the CPUs in the assigned affinity mask comes back online. Introduce the necessary state flag and the accessor functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235446.954523476@linutronix.de
2017-06-20 07:37:47 +08:00
static inline void irqd_set_managed_shutdown(struct irq_data *d)
{
__irqd_to_state(d) |= IRQD_MANAGED_SHUTDOWN;
}
static inline void irqd_clr_managed_shutdown(struct irq_data *d)
{
__irqd_to_state(d) &= ~IRQD_MANAGED_SHUTDOWN;
}
genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.state That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:11:03 +08:00
static inline void irqd_clear(struct irq_data *d, unsigned int mask)
{
genirq: Introduce struct irq_common_data to host shared irq data With the introduction of hierarchy irqdomain, struct irq_data becomes per-chip instead of per-irq and there may be multiple irq_datas associated with the same irq. Some per-irq data stored in struct irq_data now may get duplicated into multiple irq_datas, and causes inconsistent view. So introduce struct irq_common_data to host per-irq common data and to achieve consistent view among irq_chips. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:12 +08:00
__irqd_to_state(d) &= ~mask;
genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.state That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:11:03 +08:00
}
static inline void irqd_set(struct irq_data *d, unsigned int mask)
{
genirq: Introduce struct irq_common_data to host shared irq data With the introduction of hierarchy irqdomain, struct irq_data becomes per-chip instead of per-irq and there may be multiple irq_datas associated with the same irq. Some per-irq data stored in struct irq_data now may get duplicated into multiple irq_datas, and causes inconsistent view. So introduce struct irq_common_data to host per-irq common data and to achieve consistent view among irq_chips. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:12 +08:00
__irqd_to_state(d) |= mask;
genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.state That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:11:03 +08:00
}
genirq: Move IRQ_AFFINITY_SET to core Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:22:00 +08:00
static inline bool irqd_has_set(struct irq_data *d, unsigned int mask)
{
genirq: Introduce struct irq_common_data to host shared irq data With the introduction of hierarchy irqdomain, struct irq_data becomes per-chip instead of per-irq and there may be multiple irq_datas associated with the same irq. Some per-irq data stored in struct irq_data now may get duplicated into multiple irq_datas, and causes inconsistent view. So introduce struct irq_common_data to host per-irq common data and to achieve consistent view among irq_chips. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1433145945-789-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:12 +08:00
return __irqd_to_state(d) & mask;
genirq: Move IRQ_AFFINITY_SET to core Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-09 00:22:00 +08:00
}
genirq: Move kstat_incr_irqs_this_cpu() to core No more users outside the core code. Put it into the poison cabinet. That also gets rid of the linux/irq.h include in kernel_stat.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140223212739.124207133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-24 05:40:23 +08:00
genirq/PM: Properly pretend disabled state when force resuming interrupts Interrupts with the IRQF_FORCE_RESUME flag set have also the IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond the suspension of device irqs. Force resume works by pretending that the interrupt was disabled and then calling __irq_enable(). Incrementing the disabled depth counter was enough to do that, but with the recent changes which use state flags to avoid unnecessary hardware access, this is not longer sufficient. If the state flags are not set, then the hardware callbacks are not invoked and the interrupt line stays disabled in "hardware". Set the disabled and masked state when pretending that an interrupt got disabled by suspend. Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
2017-07-18 01:47:02 +08:00
static inline void irq_state_set_disabled(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_DISABLED);
}
static inline void irq_state_set_masked(struct irq_desc *desc)
{
irqd_set(&desc->irq_data, IRQD_IRQ_MASKED);
}
irq: Privatize irq_common_data::state_use_accessors irq_common_data::state_use_accessors is not designed for public use. Therefore make it private so that people who write code accessing it directly will get blamed by sparse. Also #undef the macro __irqd_to_state after used in header files, so that the macro can't be misused. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-12-29 12:18:48 +08:00
#undef __irqd_to_state
genirq: Avoid summation loops for /proc/stat Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. This can be largely avoided for interrupts which are not marked as 'PER_CPU' interrupts by simply adding a per interrupt summation counter which is incremented along with the per interrupt per cpu counter. The PER_CPU interrupts need to avoid that and use only per cpu accounting because they share the interrupt number and the interrupt descriptor and concurrent updates would conflict or require unwanted synchronization. Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de 8<------------- v2: Undo the unintentional layout change of struct irq_desc. include/linux/irqdesc.h | 1 + kernel/irq/chip.c | 12 ++++++++++-- kernel/irq/internals.h | 8 +++++++- kernel/irq/irqdesc.c | 7 ++++++- 4 files changed, 24 insertions(+), 4 deletions(-)
2019-02-08 21:48:03 +08:00
static inline void __kstat_incr_irqs_this_cpu(struct irq_desc *desc)
genirq: Move kstat_incr_irqs_this_cpu() to core No more users outside the core code. Put it into the poison cabinet. That also gets rid of the linux/irq.h include in kernel_stat.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140223212739.124207133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-24 05:40:23 +08:00
{
__this_cpu_inc(*desc->kstat_irqs);
__this_cpu_inc(kstat.irqs_sum);
}
genirq: Add sanity checks for PM options on shared interrupt lines Account the IRQF_NO_SUSPEND and IRQF_RESUME_EARLY actions on shared interrupt lines and yell loudly if there is a mismatch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28 17:44:31 +08:00
genirq: Avoid summation loops for /proc/stat Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. This can be largely avoided for interrupts which are not marked as 'PER_CPU' interrupts by simply adding a per interrupt summation counter which is incremented along with the per interrupt per cpu counter. The PER_CPU interrupts need to avoid that and use only per cpu accounting because they share the interrupt number and the interrupt descriptor and concurrent updates would conflict or require unwanted synchronization. Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de 8<------------- v2: Undo the unintentional layout change of struct irq_desc. include/linux/irqdesc.h | 1 + kernel/irq/chip.c | 12 ++++++++++-- kernel/irq/internals.h | 8 +++++++- kernel/irq/irqdesc.c | 7 ++++++- 4 files changed, 24 insertions(+), 4 deletions(-)
2019-02-08 21:48:03 +08:00
static inline void kstat_incr_irqs_this_cpu(struct irq_desc *desc)
{
__kstat_incr_irqs_this_cpu(desc);
desc->tot_count++;
}
genirq: Introduce helper function irq_data_get_node() Introduce helper function irq_data_get_node() and variants thereof to hide struct irq_data implementation details. Convert the core code to use them. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433145945-789-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:13 +08:00
static inline int irq_desc_get_node(struct irq_desc *desc)
{
genirq: Move field 'node' from irq_data into irq_common_data NUMA node information is per-irq instead of per-irqchip, so move it into struct irq_common_data. Also use CONFIG_NUMA to guard irq_common_data.node. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433145945-789-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:16 +08:00
return irq_common_data_get_node(&desc->irq_common_data);
genirq: Introduce helper function irq_data_get_node() Introduce helper function irq_data_get_node() and variants thereof to hide struct irq_data implementation details. Convert the core code to use them. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Link: http://lkml.kernel.org/r/1433145945-789-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-01 16:05:13 +08:00
}
genirq/PM: Restore system wake up from chained interrupts Commit e509bd7da149 ("genirq: Allow migration of chained interrupts by installing default action") breaks PCS wake up IRQ behaviour on TI OMAP based platforms (dra7-evm). TI OMAP IRQ wake up configuration: GIC-irqchip->PCM_IRQ |- omap_prcm_register_chain_handler |- PRCM-irqchip -> PRCM_IO_IRQ |- pcs_irq_chain_handler |- pinctrl-irqchip -> PCS_uart1_wakeup_irq This happens because IRQ PM code (irq/pm.c) is expected to ignore chained interrupts by default: static bool suspend_device_irq(struct irq_desc *desc) { if (!desc->action || desc->no_suspend_depth) return false; - it's expected !desc->action = true for chained interrupts; but, after above change, all chained interrupt descriptors will have default action handler installed - chained_action. As result, chained interrupts will be silently disabled during system suspend. Hence, fix it by introducing helper function irq_desc_is_chained() and use it in suspend_device_irq() for chained interrupts identification and skip them, once detected. Fixes: e509bd7da149 ("genirq: Allow migration of chained interrupts..") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <nsekhar@ti.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1447149492-20699-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-10 17:58:12 +08:00
static inline int irq_desc_is_chained(struct irq_desc *desc)
{
return (desc->action && desc->action == &chained_action);
}
genirq: Add sanity checks for PM options on shared interrupt lines Account the IRQF_NO_SUSPEND and IRQF_RESUME_EARLY actions on shared interrupt lines and yell loudly if there is a mismatch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28 17:44:31 +08:00
#ifdef CONFIG_PM_SLEEP
genirq: Simplify wakeup mechanism Currently we suspend wakeup interrupts by lazy disabling them and check later whether the interrupt has fired, but that's not sufficient for suspend to idle as there is no way to check that once we transitioned into the CPU idle state. So we change the mechanism in the following way: 1) Leave the wakeup interrupts enabled across suspend 2) Add a check to irq_may_run() which is called at the beginning of each flow handler whether the interrupt is an armed wakeup source. This check is basically free as it just extends the existing check for IRQD_IRQ_INPROGRESS. So no new conditional in the hot path. If the IRQD_WAKEUP_ARMED flag is set, then the interrupt is disabled, marked as pending/suspended and the pm core is notified about the wakeup event. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ rjw: syscore.c and put irq_pm_check_wakeup() into pm.c ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-29 20:00:16 +08:00
bool irq_pm_check_wakeup(struct irq_desc *desc);
genirq: Add sanity checks for PM options on shared interrupt lines Account the IRQF_NO_SUSPEND and IRQF_RESUME_EARLY actions on shared interrupt lines and yell loudly if there is a mismatch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28 17:44:31 +08:00
void irq_pm_install_action(struct irq_desc *desc, struct irqaction *action);
void irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action);
#else
genirq: Simplify wakeup mechanism Currently we suspend wakeup interrupts by lazy disabling them and check later whether the interrupt has fired, but that's not sufficient for suspend to idle as there is no way to check that once we transitioned into the CPU idle state. So we change the mechanism in the following way: 1) Leave the wakeup interrupts enabled across suspend 2) Add a check to irq_may_run() which is called at the beginning of each flow handler whether the interrupt is an armed wakeup source. This check is basically free as it just extends the existing check for IRQD_IRQ_INPROGRESS. So no new conditional in the hot path. If the IRQD_WAKEUP_ARMED flag is set, then the interrupt is disabled, marked as pending/suspended and the pm core is notified about the wakeup event. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [ rjw: syscore.c and put irq_pm_check_wakeup() into pm.c ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-29 20:00:16 +08:00
static inline bool irq_pm_check_wakeup(struct irq_desc *desc) { return false; }
genirq: Add sanity checks for PM options on shared interrupt lines Account the IRQF_NO_SUSPEND and IRQF_RESUME_EARLY actions on shared interrupt lines and yell loudly if there is a mismatch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-08-28 17:44:31 +08:00
static inline void
irq_pm_install_action(struct irq_desc *desc, struct irqaction *action) { }
static inline void
irq_pm_remove_action(struct irq_desc *desc, struct irqaction *action) { }
#endif
irq/generic-chip: Export irq_init_generic_chip() locally This function will be used in the devres variant of irq_alloc_generic_chip(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/1496246820-13250-4-git-send-email-brgl@bgdev.pl
2017-06-01 00:06:58 +08:00
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
#ifdef CONFIG_IRQ_TIMINGS
#define IRQ_TIMINGS_SHIFT 5
#define IRQ_TIMINGS_SIZE (1 << IRQ_TIMINGS_SHIFT)
#define IRQ_TIMINGS_MASK (IRQ_TIMINGS_SIZE - 1)
/**
* struct irq_timings - irq timings storing structure
* @values: a circular buffer of u64 encoded <timestamp,irq> values
* @count: the number of elements in the array
*/
struct irq_timings {
u64 values[IRQ_TIMINGS_SIZE];
int count;
};
DECLARE_PER_CPU(struct irq_timings, irq_timings);
genirq/timings: Add infrastructure for estimating the next interrupt arrival time An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:08 +08:00
extern void irq_timings_free(int irq);
extern int irq_timings_alloc(int irq);
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
static inline void irq_remove_timings(struct irq_desc *desc)
{
desc->istate &= ~IRQS_TIMINGS;
genirq/timings: Add infrastructure for estimating the next interrupt arrival time An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:08 +08:00
irq_timings_free(irq_desc_get_irq(desc));
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
}
static inline void irq_setup_timings(struct irq_desc *desc, struct irqaction *act)
{
genirq/timings: Add infrastructure for estimating the next interrupt arrival time An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:08 +08:00
int irq = irq_desc_get_irq(desc);
int ret;
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
/*
* We don't need the measurement because the idle code already
* knows the next expiry event.
*/
if (act->flags & __IRQF_TIMER)
return;
genirq/timings: Add infrastructure for estimating the next interrupt arrival time An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:08 +08:00
/*
* In case the timing allocation fails, we just want to warn,
* not fail, so letting the system boot anyway.
*/
ret = irq_timings_alloc(irq);
if (ret) {
pr_warn("Failed to allocate irq timing stats for irq%d (%d)",
irq, ret);
return;
}
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
desc->istate |= IRQS_TIMINGS;
}
extern void irq_timings_enable(void);
extern void irq_timings_disable(void);
DECLARE_STATIC_KEY_FALSE(irq_timing_enabled);
/*
* The interrupt number and the timestamp are encoded into a single
* u64 variable to optimize the size.
* 48 bit time stamp and 16 bit IRQ number is way sufficient.
* Who cares an IRQ after 78 hours of idle time?
*/
static inline u64 irq_timing_encode(u64 timestamp, int irq)
{
return (timestamp << 16) | irq;
}
static inline int irq_timing_decode(u64 value, u64 *timestamp)
{
*timestamp = value >> 16;
return value & U16_MAX;
}
genirq/timings: Encapsulate timings push For the next patches providing the selftest, it is required to artificially insert timings value in the circular buffer in order to check the correctness of the code. Encapsulate the common code between the future test code and the current code with an always-inline tag. No functional change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20190527205521.12091-5-daniel.lezcano@linaro.org
2019-05-28 04:55:17 +08:00
static __always_inline void irq_timings_push(u64 ts, int irq)
{
struct irq_timings *timings = this_cpu_ptr(&irq_timings);
timings->values[timings->count & IRQ_TIMINGS_MASK] =
irq_timing_encode(ts, irq);
timings->count++;
}
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
/*
* The function record_irq_time is only called in one place in the
* interrupts handler. We want this function always inline so the code
* inside is embedded in the function and the static key branching
* code can act at the higher level. Without the explicit
* __always_inline we can end up with a function call and a small
* overhead in the hotpath for nothing.
*/
static __always_inline void record_irq_time(struct irq_desc *desc)
{
if (!static_branch_likely(&irq_timing_enabled))
return;
genirq/timings: Encapsulate timings push For the next patches providing the selftest, it is required to artificially insert timings value in the circular buffer in order to check the correctness of the code. Encapsulate the common code between the future test code and the current code with an always-inline tag. No functional change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20190527205521.12091-5-daniel.lezcano@linaro.org
2019-05-28 04:55:17 +08:00
if (desc->istate & IRQS_TIMINGS)
irq_timings_push(local_clock(), irq_desc_get_irq(desc));
genirq/timings: Add infrastructure to track the interrupt timings The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events <irq, timestamp>, the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Hannes Reinecke <hare@suse.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org
2017-06-23 22:11:07 +08:00
}
#else
static inline void irq_remove_timings(struct irq_desc *desc) {}
static inline void irq_setup_timings(struct irq_desc *desc,
struct irqaction *act) {};
static inline void record_irq_time(struct irq_desc *desc) {}
#endif /* CONFIG_IRQ_TIMINGS */
irq/generic-chip: Export irq_init_generic_chip() locally This function will be used in the devres variant of irq_alloc_generic_chip(). Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-doc@vger.kernel.org Cc: Jonathan Corbet <corbet@lwn.net> Link: http://lkml.kernel.org/r/1496246820-13250-4-git-send-email-brgl@bgdev.pl
2017-06-01 00:06:58 +08:00
#ifdef CONFIG_GENERIC_IRQ_CHIP
void irq_init_generic_chip(struct irq_chip_generic *gc, const char *name,
int num_ct, unsigned int irq_base,
void __iomem *reg_base, irq_flow_handler_t handler);
#else
static inline void
irq_init_generic_chip(struct irq_chip_generic *gc, const char *name,
int num_ct, unsigned int irq_base,
void __iomem *reg_base, irq_flow_handler_t handler) { }
#endif /* CONFIG_GENERIC_IRQ_CHIP */
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
genirq: Move pending helpers to internal.h So that the affinity code can reuse them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
2017-06-20 07:37:24 +08:00
#ifdef CONFIG_GENERIC_PENDING_IRQ
static inline bool irq_can_move_pcntxt(struct irq_data *data)
{
return irqd_can_move_in_process_context(data);
}
static inline bool irq_move_pending(struct irq_data *data)
{
return irqd_is_setaffinity_pending(data);
}
static inline void
irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask)
{
cpumask_copy(desc->pending_mask, mask);
}
static inline void
irq_get_pending(struct cpumask *mask, struct irq_desc *desc)
{
cpumask_copy(mask, desc->pending_mask);
}
genirq/cpuhotplug: Add support for cleaning up move in progress In order to move x86 to the generic hotplug migration code, add support for cleaning up move in progress bits. On architectures which have this x86 specific (mis)feature not enabled, this is optimized out by the compiler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.525817311@linutronix.de
2017-06-20 07:37:29 +08:00
static inline struct cpumask *irq_desc_get_pending_mask(struct irq_desc *desc)
{
return desc->pending_mask;
}
genirq: Add protection against unsafe usage of generic_handle_irq() In general calling generic_handle_irq() with interrupts disabled from non interrupt context is harmless. For some interrupt controllers like the x86 trainwrecks this is outright dangerous as it might corrupt state if an interrupt affinity change is pending. Add infrastructure which allows to mark interrupts as unsafe and catch such usage in generic_handle_irq(). Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lkml.kernel.org/r/20200306130623.590923677@linutronix.de
2020-03-06 21:03:43 +08:00
static inline bool handle_enforce_irqctx(struct irq_data *data)
{
return irqd_is_handle_enforce_irqctx(data);
}
genirq: Move irq_fixup_move_pending() to core Now that x86 uses the generic code, the function declaration and inline stub can move to the core internal header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.928156166@linutronix.de
2017-06-20 07:37:34 +08:00
bool irq_fixup_move_pending(struct irq_desc *desc, bool force_clear);
genirq: Move pending helpers to internal.h So that the affinity code can reuse them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
2017-06-20 07:37:24 +08:00
#else /* CONFIG_GENERIC_PENDING_IRQ */
static inline bool irq_can_move_pcntxt(struct irq_data *data)
{
return true;
}
static inline bool irq_move_pending(struct irq_data *data)
{
return false;
}
static inline void
irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask)
{
}
static inline void
irq_get_pending(struct cpumask *mask, struct irq_desc *desc)
{
}
genirq/cpuhotplug: Add support for cleaning up move in progress In order to move x86 to the generic hotplug migration code, add support for cleaning up move in progress bits. On architectures which have this x86 specific (mis)feature not enabled, this is optimized out by the compiler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.525817311@linutronix.de
2017-06-20 07:37:29 +08:00
static inline struct cpumask *irq_desc_get_pending_mask(struct irq_desc *desc)
{
return NULL;
}
genirq: Move irq_fixup_move_pending() to core Now that x86 uses the generic code, the function declaration and inline stub can move to the core internal header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.928156166@linutronix.de
2017-06-20 07:37:34 +08:00
static inline bool irq_fixup_move_pending(struct irq_desc *desc, bool fclear)
{
return false;
}
genirq: Add protection against unsafe usage of generic_handle_irq() In general calling generic_handle_irq() with interrupts disabled from non interrupt context is harmless. For some interrupt controllers like the x86 trainwrecks this is outright dangerous as it might corrupt state if an interrupt affinity change is pending. Add infrastructure which allows to mark interrupts as unsafe and catch such usage in generic_handle_irq(). Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lkml.kernel.org/r/20200306130623.590923677@linutronix.de
2020-03-06 21:03:43 +08:00
static inline bool handle_enforce_irqctx(struct irq_data *data)
{
return false;
}
genirq/cpuhotplug: Add support for cleaning up move in progress In order to move x86 to the generic hotplug migration code, add support for cleaning up move in progress bits. On architectures which have this x86 specific (mis)feature not enabled, this is optimized out by the compiler. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235445.525817311@linutronix.de
2017-06-20 07:37:29 +08:00
#endif /* !CONFIG_GENERIC_PENDING_IRQ */
genirq: Move pending helpers to internal.h So that the affinity code can reuse them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170619235445.109426284@linutronix.de
2017-06-20 07:37:24 +08:00
genirq: Make state consistent for !IRQ_DOMAIN_HIERARCHY In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de
2017-09-14 05:29:07 +08:00
#if !defined(CONFIG_IRQ_DOMAIN) || !defined(CONFIG_IRQ_DOMAIN_HIERARCHY)
genirq/irqdomain: Rename early argument of irq_domain_activate_irq() The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-12-29 23:59:06 +08:00
static inline int irq_domain_activate_irq(struct irq_data *data, bool reserve)
genirq: Make state consistent for !IRQ_DOMAIN_HIERARCHY In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de
2017-09-14 05:29:07 +08:00
{
irqd_set_activated(data);
genirq/irqdomain: Allow irq_domain_activate_irq() to fail Allow irq_domain_activate_irq() to fail. This is required to support a reservation and late vector assignment scheme. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de
2017-09-14 05:29:11 +08:00
return 0;
genirq: Make state consistent for !IRQ_DOMAIN_HIERARCHY In the !IRQ_DOMAIN_HIERARCHY cas the activation stubs are not setting/clearing the activation status bits. This is not a problem at the moment, but upcoming changes require a correct status. Add the set/clear incovations to the stub functions and move them to the core internal header to avoid duplication and visibility outside the core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.591985591@linutronix.de
2017-09-14 05:29:07 +08:00
}
static inline void irq_domain_deactivate_irq(struct irq_data *data)
{
irqd_clr_activated(data);
}
#endif
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
#ifdef CONFIG_GENERIC_IRQ_DEBUGFS
genirq/debugfs: Remove pointless NULL pointer check debugfs_remove() has it's own NULL pointer check. Remove the conditional and make irq_remove_debugfs_entry() an inline helper Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-24 17:05:59 +08:00
#include <linux/debugfs.h>
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
void irq_add_debugfs_entry(unsigned int irq, struct irq_desc *desc);
genirq/debugfs: Remove pointless NULL pointer check debugfs_remove() has it's own NULL pointer check. Remove the conditional and make irq_remove_debugfs_entry() an inline helper Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-24 17:05:59 +08:00
static inline void irq_remove_debugfs_entry(struct irq_desc *desc)
{
debugfs_remove(desc->debugfs_file);
genirq/msi: Capture device name for debugfs For debugging the allocation of unused or potentially leaked interrupt descriptor it's helpful to have some information about the site which allocated them. In case of MSI this is simple because the caller hands the device struct pointer into the domain allocation function. Duplicate the device name and show it in the debugfs entry of the interrupt descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.433038426@linutronix.de
2017-09-14 05:29:05 +08:00
kfree(desc->dev_name);
genirq/debugfs: Remove pointless NULL pointer check debugfs_remove() has it's own NULL pointer check. Remove the conditional and make irq_remove_debugfs_entry() an inline helper Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-24 17:05:59 +08:00
}
genirq/msi: Capture device name for debugfs For debugging the allocation of unused or potentially leaked interrupt descriptor it's helpful to have some information about the site which allocated them. In case of MSI this is simple because the caller hands the device struct pointer into the domain allocation function. Duplicate the device name and show it in the debugfs entry of the interrupt descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.433038426@linutronix.de
2017-09-14 05:29:05 +08:00
void irq_debugfs_copy_devname(int irq, struct device *dev);
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
# ifdef CONFIG_IRQ_DOMAIN
void irq_domain_debugfs_init(struct dentry *root);
# else
genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN Fix this build error: kernel/irq/internals.h:440:20: error: inlining failed in call to always_inline 'irq_domain_debugfs_init': function body not available kernel/irq/debugfs.c:202:2: note: called from here irq_domain_debugfs_init(root_dir); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1707041124000.1712@schleppi
2017-07-04 17:25:15 +08:00
static inline void irq_domain_debugfs_init(struct dentry *root)
{
}
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
# endif
#else /* CONFIG_GENERIC_IRQ_DEBUGFS */
static inline void irq_add_debugfs_entry(unsigned int irq, struct irq_desc *d)
{
}
static inline void irq_remove_debugfs_entry(struct irq_desc *d)
{
}
genirq/msi: Capture device name for debugfs For debugging the allocation of unused or potentially leaked interrupt descriptor it's helpful to have some information about the site which allocated them. In case of MSI this is simple because the caller hands the device struct pointer into the domain allocation function. Duplicate the device name and show it in the debugfs entry of the interrupt descriptor. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.433038426@linutronix.de
2017-09-14 05:29:05 +08:00
static inline void irq_debugfs_copy_devname(int irq, struct device *dev)
{
}
genirq/debugfs: Add proper debugfs interface Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-20 07:37:17 +08:00
#endif /* CONFIG_GENERIC_IRQ_DEBUGFS */
Copy Permalink