kernel_optimize_test/tools/perf/tests/expr.c

88 lines
2.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include "util/debug.h"
#include "util/expr.h"
#include "tests.h"
#include <stdlib.h>
#include <string.h>
#include <linux/zalloc.h>
static int test(struct expr_parse_ctx *ctx, const char *e, double val2)
{
double val;
perf metricgroups: Enhance JSON/metric infrastructure to handle "?" Patch enhances current metric infrastructure to handle "?" in the metric expression. The "?" can be use for parameters whose value not known while creating metric events and which can be replace later at runtime to the proper value. It also add flexibility to create multiple events out of single metric event added in JSON file. Patch adds function 'arch_get_runtimeparam' which is a arch specific function, returns the count of metric events need to be created. By default it return 1. This infrastructure needed for hv_24x7 socket/chip level events. "hv_24x7" chip level events needs specific chip-id to which the data is requested. Function 'arch_get_runtimeparam' implemented in header.c which extract number of sockets from sysfs file "sockets" under "/sys/devices/hv_24x7/interface/". With this patch basically we are trying to create as many metric events as define by runtime_param. For that one loop is added in function 'metricgroup__add_metric', which create multiple events at run time depend on return value of 'arch_get_runtimeparam' and merge that event in 'group_list'. To achieve that we are actually passing this parameter value as part of `expr__find_other` function and changing "?" present in metric expression with this value. As in our JSON file, there gonna be single metric event, and out of which we are creating multiple events. To understand which data count belongs to which parameter value, we also printing param value in generic_metric function. For example, command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000 1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 So, here _0 and _1 after PowerBUS_Frequency specify parameter value. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20200401203340.31402-5-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-02 04:33:37 +08:00
if (expr__parse(&val, ctx, e, 1))
TEST_ASSERT_VAL("parse test failed", 0);
TEST_ASSERT_VAL("unexpected value", val == val2);
return 0;
}
int test__expr(struct test *t __maybe_unused, int subtest __maybe_unused)
{
const char *p;
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
double val, *val_ptr;
int ret;
struct expr_parse_ctx ctx;
expr__ctx_init(&ctx);
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__add_id(&ctx, strdup("FOO"), 1);
expr__add_id(&ctx, strdup("BAR"), 2);
ret = test(&ctx, "1+1", 2);
ret |= test(&ctx, "FOO+BAR", 3);
ret |= test(&ctx, "(BAR/2)%2", 1);
ret |= test(&ctx, "1 - -4", 5);
ret |= test(&ctx, "(FOO-1)*2 + (BAR/2)%2 - -4", 5);
ret |= test(&ctx, "1-1 | 1", 1);
ret |= test(&ctx, "1-1 & 1", 0);
ret |= test(&ctx, "min(1,2) + 1", 2);
ret |= test(&ctx, "max(1,2) + 1", 3);
ret |= test(&ctx, "1+1 if 3*4 else 0", 2);
ret |= test(&ctx, "1.1 + 2.1", 3.2);
ret |= test(&ctx, ".1 + 2.", 2.1);
ret |= test(&ctx, "d_ratio(1, 2)", 0.5);
ret |= test(&ctx, "d_ratio(2.5, 0)", 0);
perf expr: Add < and > operators These are broadly useful but required to handle TMA metrics. For example encoding Ports_Utilization from: https://download.01.org/perfmon/TMA_Metrics.csv requires '<'. { "BriefDescription": "This metric estimates fraction of cycles the CPU performance was potentially limited due to Core computation issues (non divider-related). Two distinct categories can be attributed into this metric: (1) heavy data-dependency among contiguous instructions would manifest in this metric - such cases are often referred to as low Instruction Level Parallelism (ILP). (2) Contention on some hardware execution unit other than Divider. For example; when there are too many multiply operations.", "MetricExpr": "( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) if ( cpu@ARITH.DIVIDER_ACTIVE\\,cmask\\=1@ < cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) else ( ( cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ + cpu@EXE_ACTIVITY.1_PORTS_UTIL@ + ( cpu@EXE_ACTIVITY.2_PORTS_UTIL@ * ( ( ( cpu@UOPS_RETIRED.RETIRE_SLOTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) ) / ( ( 4.000000 ) + 1.000000 ) ) ) ) - cpu@EXE_ACTIVITY.EXE_BOUND_0_PORTS@ ) / ( cpu@CPU_CLK_UNHALTED.THREAD@ ) )", "MetricGroup": "Topdown_Group_Ports_Utilization", "MetricName": "Topdown_Metric_Ports_Utilization" }, Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200610235823.52557-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-11 07:58:23 +08:00
ret |= test(&ctx, "1.1 < 2.2", 1);
ret |= test(&ctx, "2.2 > 1.1", 1);
ret |= test(&ctx, "1.1 < 1.1", 0);
ret |= test(&ctx, "2.2 > 2.2", 0);
ret |= test(&ctx, "2.2 < 1.1", 0);
ret |= test(&ctx, "1.1 > 2.2", 0);
if (ret)
return ret;
p = "FOO/0";
perf metricgroups: Enhance JSON/metric infrastructure to handle "?" Patch enhances current metric infrastructure to handle "?" in the metric expression. The "?" can be use for parameters whose value not known while creating metric events and which can be replace later at runtime to the proper value. It also add flexibility to create multiple events out of single metric event added in JSON file. Patch adds function 'arch_get_runtimeparam' which is a arch specific function, returns the count of metric events need to be created. By default it return 1. This infrastructure needed for hv_24x7 socket/chip level events. "hv_24x7" chip level events needs specific chip-id to which the data is requested. Function 'arch_get_runtimeparam' implemented in header.c which extract number of sockets from sysfs file "sockets" under "/sys/devices/hv_24x7/interface/". With this patch basically we are trying to create as many metric events as define by runtime_param. For that one loop is added in function 'metricgroup__add_metric', which create multiple events at run time depend on return value of 'arch_get_runtimeparam' and merge that event in 'group_list'. To achieve that we are actually passing this parameter value as part of `expr__find_other` function and changing "?" present in metric expression with this value. As in our JSON file, there gonna be single metric event, and out of which we are creating multiple events. To understand which data count belongs to which parameter value, we also printing param value in generic_metric function. For example, command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000 1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 So, here _0 and _1 after PowerBUS_Frequency specify parameter value. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20200401203340.31402-5-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-02 04:33:37 +08:00
ret = expr__parse(&val, &ctx, p, 1);
TEST_ASSERT_VAL("division by zero", ret == -1);
p = "BAR/";
perf metricgroups: Enhance JSON/metric infrastructure to handle "?" Patch enhances current metric infrastructure to handle "?" in the metric expression. The "?" can be use for parameters whose value not known while creating metric events and which can be replace later at runtime to the proper value. It also add flexibility to create multiple events out of single metric event added in JSON file. Patch adds function 'arch_get_runtimeparam' which is a arch specific function, returns the count of metric events need to be created. By default it return 1. This infrastructure needed for hv_24x7 socket/chip level events. "hv_24x7" chip level events needs specific chip-id to which the data is requested. Function 'arch_get_runtimeparam' implemented in header.c which extract number of sockets from sysfs file "sockets" under "/sys/devices/hv_24x7/interface/". With this patch basically we are trying to create as many metric events as define by runtime_param. For that one loop is added in function 'metricgroup__add_metric', which create multiple events at run time depend on return value of 'arch_get_runtimeparam' and merge that event in 'group_list'. To achieve that we are actually passing this parameter value as part of `expr__find_other` function and changing "?" present in metric expression with this value. As in our JSON file, there gonna be single metric event, and out of which we are creating multiple events. To understand which data count belongs to which parameter value, we also printing param value in generic_metric function. For example, command:# ./perf stat -M PowerBUS_Frequency -C 0 -I 1000 1.000101867 9,356,933 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 1.000101867 9,366,134 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 2.000314878 9,365,868 hv_24x7/pm_pb_cyc,chip=0/ # 2.3 GHz PowerBUS_Frequency_0 2.000314878 9,366,092 hv_24x7/pm_pb_cyc,chip=1/ # 2.3 GHz PowerBUS_Frequency_1 So, here _0 and _1 after PowerBUS_Frequency specify parameter value. Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Joe Mario <jmario@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lore.kernel.org/lkml/20200401203340.31402-5-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-02 04:33:37 +08:00
ret = expr__parse(&val, &ctx, p, 1);
TEST_ASSERT_VAL("missing operand", ret == -1);
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__ctx_clear(&ctx);
TEST_ASSERT_VAL("find other",
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__find_other("FOO + BAR + BAZ + BOZO", "FOO",
&ctx, 1) == 0);
TEST_ASSERT_VAL("find other", hashmap__size(&ctx.ids) == 3);
TEST_ASSERT_VAL("find other", hashmap__find(&ctx.ids, "BAR",
(void **)&val_ptr));
TEST_ASSERT_VAL("find other", hashmap__find(&ctx.ids, "BAZ",
(void **)&val_ptr));
TEST_ASSERT_VAL("find other", hashmap__find(&ctx.ids, "BOZO",
(void **)&val_ptr));
perf tests: Fix memory leak by expr__find_other() in test__expr() ================================================================= ==7506==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13 byte(s) in 3 object(s) allocated from: #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x5625e53aaef0 in expr__find_other util/expr.y:221 #2 0x5625e51bcd3f in test__expr tests/expr.c:52 #3 0x5625e51528e6 in run_test tests/builtin-test.c:358 #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #6 0x5625e515572f in cmd_test tests/builtin-test.c:722 #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by: Changbin Du <changbin.du@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 075167363f8b ("perf tools: Add a simple expression parser for JSON") Link: http://lkml.kernel.org/r/20190316080556.3075-16-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-16 16:05:55 +08:00
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__ctx_clear(&ctx);
TEST_ASSERT_VAL("find other",
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__find_other("EVENT1\\,param\\=?@ + EVENT2\\,param\\=?@",
NULL, &ctx, 3) == 0);
TEST_ASSERT_VAL("find other", hashmap__size(&ctx.ids) == 2);
TEST_ASSERT_VAL("find other", hashmap__find(&ctx.ids, "EVENT1,param=3/",
(void **)&val_ptr));
TEST_ASSERT_VAL("find other", hashmap__find(&ctx.ids, "EVENT2,param=3/",
(void **)&val_ptr));
perf expr: Migrate expr ids table to a hashmap Use a hashmap between a char* string and a double* value. While bpf's hashmap entries are size_t in size, we can't guarantee sizeof(size_t) >= sizeof(double). Avoid a memory allocation when gathering ids by making 0.0 a special value encoded as NULL. Original map suggestion by Andi Kleen: https://lore.kernel.org/lkml/20200224210308.GQ160988@tassilo.jf.intel.com/ and seconded by Jiri Olsa: https://lore.kernel.org/lkml/20200423112915.GH1136647@krava/ Committer notes: There are fixes that need to land upstream before we can use libbpf's headers, for now use our copy unconditionally, since the data structures at this point are exactly the same, no problem. When the fixes for libbpf's hashmap land upstream, we can fix this up. Testing it: Building with LIBBPF=1, i.e. the default: $ perf -vv | grep -i bpf bpf: [ on ] # HAVE_LIBBPF_SUPPORT $ nm ~/bin/perf | grep -i libbpf_ | wc -l 39 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 17 $ Explicitely building without LIBBPF: $ perf -vv | grep -i bpf bpf: [ OFF ] # HAVE_LIBBPF_SUPPORT $ $ nm ~/bin/perf | grep -i libbpf_ | wc -l 0 $ nm ~/bin/perf | grep -i hashmap_ | wc -l 9 $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: kp singh <kpsingh@chromium.org> Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20200515221732.44078-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-16 06:17:32 +08:00
expr__ctx_clear(&ctx);
return 0;
}