kernel_optimize_test/Documentation/cpu-freq/cpufreq-nforce2.txt


The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.

This works better than on other plattforms, because the FSB of the CPU
can be controlled independently from the PCI/AGP clock.

The module has two options:

	fid: 	 multiplier * 10 (for example 8.5 = 85)
	min_fsb: minimum FSB

If not set, fid is calculated from the current CPU speed and the FSB.
min_fsb defaults to FSB at boot time - 50 MHz.

IMPORTANT: The available range is limited downwards!
           Also the minimum available FSB can differ, for systems 
           booting with 200 MHz, 150 should always work.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-17 06:20:36 +08:00
			`The cpufreq-nforce2 driver changes the FSB on nVidia nForce2 plattforms.`

			`This works better than on other plattforms, because the FSB of the CPU`
			`can be controlled independently from the PCI/AGP clock.`

			`The module has two options:`

			`fid: multiplier * 10 (for example 8.5 = 85)`
			`min_fsb: minimum FSB`

			`If not set, fid is calculated from the current CPU speed and the FSB.`
			`min_fsb defaults to FSB at boot time - 50 MHz.`

			`IMPORTANT: The available range is limited downwards!`
			`Also the minimum available FSB can differ, for systems`
			`booting with 200 MHz, 150 should always work.`