kernel_optimize_test/tools/perf/util/bpf-loader.h

214 lines
6.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2015, Wang Nan <wangnan0@huawei.com>
* Copyright (C) 2015, Huawei Inc.
*/
#ifndef __BPF_LOADER_H
#define __BPF_LOADER_H
#include <linux/compiler.h>
#include <linux/err.h>
perf bpf: Improve BPF related error messages A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 21:58:09 +08:00
#include <bpf/libbpf.h>
perf bpf: Improve BPF related error messages A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 21:58:09 +08:00
enum bpf_loader_errno {
__BPF_LOADER_ERRNO__START = __LIBBPF_ERRNO__START - 100,
/* Invalid config string */
BPF_LOADER_ERRNO__CONFIG = __BPF_LOADER_ERRNO__START,
BPF_LOADER_ERRNO__GROUP, /* Invalid group name */
BPF_LOADER_ERRNO__EVENTNAME, /* Event name is missing */
BPF_LOADER_ERRNO__INTERNAL, /* BPF loader internal error */
BPF_LOADER_ERRNO__COMPILE, /* Error when compiling BPF scriptlet */
BPF_LOADER_ERRNO__PROGCONF_TERM,/* Invalid program config term in config string */
perf bpf: Add prologue for BPF programs for fetching arguments This patch generates a prologue for a BPF program which fetches arguments for it. With this patch, the program can have arguments as follow: SEC("lock_page=__lock_page page->flags") int lock_page(struct pt_regs *ctx, int err, unsigned long flags) { return 1; } This patch passes at most 3 arguments from r3, r4 and r5. r1 is still the ctx pointer. r2 is used to indicate if dereferencing was done successfully. This patch uses r6 to hold ctx (struct pt_regs) and r7 to hold stack pointer for result. Result of each arguments first store on stack: low address BPF_REG_FP - 24 ARG3 BPF_REG_FP - 16 ARG2 BPF_REG_FP - 8 ARG1 BPF_REG_FP high address Then loaded into r3, r4 and r5. The output prologue for offn(...off2(off1(reg)))) should be: r6 <- r1 // save ctx into a callee saved register r7 <- fp r7 <- r7 - stack_offset // pointer to result slot /* load r3 with the offset in pt_regs of 'reg' */ (r7) <- r3 // make slot valid r3 <- r3 + off1 // prepare to read unsafe pointer r2 <- 8 r1 <- r7 // result put onto stack call probe_read // read unsafe pointer jnei r0, 0, err // error checking r3 <- (r7) // read result r3 <- r3 + off2 // prepare to read unsafe pointer r2 <- 8 r1 <- r7 call probe_read jnei r0, 0, err ... /* load r2, r3, r4 from stack */ goto success err: r2 <- 1 /* load r3, r4, r5 with 0 */ goto usercode success: r2 <- 0 usercode: r1 <- r6 // restore ctx // original user code If all of arguments reside in register (dereferencing is not required), gen_prologue_fastpath() will be used to create fast prologue: r3 <- (r1 + offset of reg1) r4 <- (r1 + offset of reg2) r5 <- (r1 + offset of reg3) r2 <- 0 P.S. eBPF calling convention is defined as: * r0 - return value from in-kernel function, and exit value for eBPF program * r1 - r5 - arguments from eBPF program to in-kernel function * r6 - r9 - callee saved registers that in-kernel function will preserve * r10 - read-only frame pointer to access stack Committer note: At least testing if it builds and loads: # cat test_probe_arg.c struct pt_regs; __attribute__((section("lock_page=__lock_page page->flags"), used)) int func(struct pt_regs *ctx, int err, unsigned long flags) { return 1; } char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = 0x40300; # perf record -e ./test_probe_arg.c usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] # perf evlist perf_bpf_probe:lock_page # Signed-off-by: He Kuang <hekuang@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447675815-166222-11-git-send-email-wangnan0@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-16 20:10:12 +08:00
BPF_LOADER_ERRNO__PROLOGUE, /* Failed to generate prologue */
BPF_LOADER_ERRNO__PROLOGUE2BIG, /* Prologue too big for program */
BPF_LOADER_ERRNO__PROLOGUEOOB, /* Offset out of bound for prologue */
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
BPF_LOADER_ERRNO__OBJCONF_OPT, /* Invalid object config option */
BPF_LOADER_ERRNO__OBJCONF_CONF, /* Config value not set (lost '=')) */
BPF_LOADER_ERRNO__OBJCONF_MAP_OPT, /* Invalid object map config option */
BPF_LOADER_ERRNO__OBJCONF_MAP_NOTEXIST, /* Target map not exist */
BPF_LOADER_ERRNO__OBJCONF_MAP_VALUE, /* Incorrect value type for map */
BPF_LOADER_ERRNO__OBJCONF_MAP_TYPE, /* Incorrect map type */
BPF_LOADER_ERRNO__OBJCONF_MAP_KEYSIZE, /* Incorrect map key size */
BPF_LOADER_ERRNO__OBJCONF_MAP_VALUESIZE,/* Incorrect map value size */
perf tools: Enable passing event to BPF object A new syntax is added to the parser so that the user can access predefined perf events in BPF objects. After this patch, BPF programs for perf are finally able to utilize bpf_perf_event_read() introduced in commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter"). Test result: # cat test_bpf_map_2.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; static int (*get_smp_processor_id)(void) = (void *)BPF_FUNC_get_smp_processor_id; static int (*perf_event_read)(struct bpf_map_def *, int) = (void *)BPF_FUNC_perf_event_read; struct bpf_map_def SEC("maps") pmu_map = { .type = BPF_MAP_TYPE_PERF_EVENT_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = __NR_CPUS__, }; SEC("func_write=sys_write") int func_write(void *ctx) { unsigned long long val; char fmt[] = "sys_write: pmu=%llu\n"; val = perf_event_read(&pmu_map, get_smp_processor_id()); trace_printk(fmt, sizeof(fmt), val); return 0; } SEC("func_write_return=sys_write%return") int func_write_return(void *ctx) { unsigned long long val = 0; char fmt[] = "sys_write_return: pmu=%llu\n"; val = perf_event_read(&pmu_map, get_smp_processor_id()); trace_printk(fmt, sizeof(fmt), val); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ Normal case: # echo "" > /sys/kernel/debug/tracing/trace # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls / [SNIP] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data (7 samples) ] # cat /sys/kernel/debug/tracing/trace | grep ls ls-17066 [000] d... 938449.863301: : sys_write: pmu=1157327 ls-17066 [000] dN.. 938449.863342: : sys_write_return: pmu=1225218 ls-17066 [000] d... 938449.863349: : sys_write: pmu=1241922 ls-17066 [000] dN.. 938449.863369: : sys_write_return: pmu=1267445 Normal case (system wide): # echo "" > /sys/kernel/debug/tracing/trace # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.811 MB perf.data (120 samples) ] # cat /sys/kernel/debug/tracing/trace | grep -v '18446744073709551594' | grep -v perf | head -n 20 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | gmain-30828 [002] d... 2740551.068992: : sys_write: pmu=84373 gmain-30828 [002] d... 2740551.068992: : sys_write_return: pmu=87696 gmain-30828 [002] d... 2740551.068996: : sys_write: pmu=100658 gmain-30828 [002] d... 2740551.068997: : sys_write_return: pmu=102572 Error case 1: # perf record -e './test_bpf_map_2.c' ls / [SNIP] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB perf.data ] # cat /sys/kernel/debug/tracing/trace | grep ls ls-17115 [007] d... 2724279.665625: : sys_write: pmu=18446744073709551614 ls-17115 [007] dN.. 2724279.665651: : sys_write_return: pmu=18446744073709551614 ls-17115 [007] d... 2724279.665658: : sys_write: pmu=18446744073709551614 ls-17115 [007] dN.. 2724279.665677: : sys_write_return: pmu=18446744073709551614 (18446744073709551614 is 0xfffffffffffffffe (-2)) Error case 2: # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=evt/' -a event syntax error: '..ps:pmu_map.event=evt/' \___ Event not found for map setting Hint: Valid config terms: map:[<arraymap>].value=[value] map:[<eventmap>].event=[event] [SNIP] Error case 3: # ls /proc/2348/task/ 2348 2505 2506 2507 2508 # perf record -i -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' -p 2348 ERROR: Apply config to BPF failed: Cannot set event to BPF map in multi-thread tracing Error case 4: # perf record -e cycles -e './test_bpf_map_2.c/map:pmu_map.event=cycles/' ls / ERROR: Apply config to BPF failed: Doesn't support inherit event (Hint: use -i to turn off inherit) Error case 5: # perf record -i -e raw_syscalls:sys_enter -e './test_bpf_map_2.c/map:pmu_map.event=raw_syscalls:sys_enter/' ls ERROR: Apply config to BPF failed: Can only put raw, hardware and BPF output event into a BPF map Error case 6: # perf record -i -e './test_bpf_map_2.c/map:pmu_map.event=123/' ls / event syntax error: '.._map.event=123/' \___ Incorrect value type for map [SNIP] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-7-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:33 +08:00
BPF_LOADER_ERRNO__OBJCONF_MAP_NOEVT, /* Event not found for map setting */
BPF_LOADER_ERRNO__OBJCONF_MAP_MAPSIZE, /* Invalid map size for event setting */
BPF_LOADER_ERRNO__OBJCONF_MAP_EVTDIM, /* Event dimension too large */
BPF_LOADER_ERRNO__OBJCONF_MAP_EVTINH, /* Doesn't support inherit event */
BPF_LOADER_ERRNO__OBJCONF_MAP_EVTTYPE, /* Wrong event type for map */
2016-02-22 17:10:34 +08:00
BPF_LOADER_ERRNO__OBJCONF_MAP_IDX2BIG, /* Index too large */
perf bpf: Improve BPF related error messages A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 21:58:09 +08:00
__BPF_LOADER_ERRNO__END,
};
struct evsel;
struct evlist;
struct bpf_object;
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
struct parse_events_term;
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
#define PERF_BPF_PROBE_GROUP "perf_bpf_probe"
typedef int (*bpf_prog_iter_callback_t)(const char *group, const char *event,
int fd, struct bpf_object *obj, void *arg);
perf bpf: Collect perf_evsel in BPF object files This patch creates a 'struct perf_evsel' for every probe in a BPF object file(s) and fills 'struct evlist' with them. The previously introduced dummy event is now removed. After this patch, the following command: # perf record --event filter.o ls Can trace on each of the probes defined in filter.o. The core of this patch is bpf__foreach_tev(), which calls a callback function for each 'struct probe_trace_event' event for a bpf program with each associated file descriptors. The add_bpf_event() callback creates evsels by calling parse_events_add_tracepoint(). Since bpf-loader.c will not be built if libbpf is turned off, an empty bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors. Committer notes: Before: # /tmp/oldperf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.198 MB perf.data ] # perf evlist /tmp/foo.o # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 I.e. we create just the PERF_TYPE_SOFTWARE (type: 1), PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.210 MB perf.data ] # perf evlist -v perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd, which is how, after setting up the event via the kprobes interface, the 'perf_bpf_probe:fork' event is accessible via the perf_event_open syscall. This is all transient, as soon as the 'perf record' session ends, these probes will go away. To see how it looks like, lets try doing a neverending session, one that expects a control+C to end: # perf record --event /tmp/foo.o -a So, with that in place, we can use 'perf probe' to see what is in place: # perf probe -l perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c) We also can use debugfs: [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events p:perf_bpf_probe/fork _text+638512 Ok, now lets stop and see if we got some forks: [root@felicio linux]# perf record --event /tmp/foo.o -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ] [root@felicio linux]# perf script sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30) <SNIP> Sure enough, we have 111 forks :-) Callchains seems to work as well: # perf report --stdio --no-child # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 562 of event 'perf_bpf_probe:fork' # Event count (approx.): 562 # # Overhead Command Shared Object Symbol # ........ ........ ................ ............ # 44.66% sh [kernel.vmlinux] [k] _do_fork | ---_do_fork entry_SYSCALL_64_fastpath __libc_fork make_child 26.16% make [kernel.vmlinux] [k] _do_fork <SNIP> # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:17 +08:00
#ifdef HAVE_LIBBPF_SUPPORT
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event This patch provides infrastructure for passing source files to --event directly using: # perf record --event bpf-file.c command This patch does following works: 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is expanded to allow caller tell it whether the passed file is source file or object. 2) llvm__compile_bpf() is called to compile the '.c' file, the result is saved into memory. Use bpf_object__open_buffer() to load the in-memory object. Introduces a bpf-script-example.c so we can manually test it: # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1 Note that '--clang-opt' must put before '--event'. Futher patches will merge it into a testcase so can be tested automatically. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:20 +08:00
struct bpf_object *bpf__prepare_load(const char *filename, bool source);
perf bpf: Improve BPF related error messages A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 21:58:09 +08:00
int bpf__strerror_prepare_load(const char *filename, bool source,
int err, char *buf, size_t size);
struct bpf_object *bpf__prepare_load_buffer(void *obj_buf, size_t obj_buf_sz,
const char *name);
void bpf__clear(void);
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
int bpf__probe(struct bpf_object *obj);
int bpf__unprobe(struct bpf_object *obj);
int bpf__strerror_probe(struct bpf_object *obj, int err,
char *buf, size_t size);
perf tools: Load eBPF object into kernel This patch utilizes bpf_object__load() provided by libbpf to load all objects into kernel. Committer notes: Testing it: When using an incorrect kernel version number, i.e., having this in your eBPF proggie: int _version __attribute__((section("version"), used)) = 0x40100; For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event parsing time, to provide a better error report to the user: # perf record --event /tmp/foo.o sleep 1 libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: libbpf: -- END LOG -- libbpf: failed to load program 'fork=_do_fork' libbpf: failed to load object '/tmp/foo.o' event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+ kernel, the whole process goes thru: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.202 MB perf.data ] # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:16 +08:00
int bpf__load(struct bpf_object *obj);
int bpf__strerror_load(struct bpf_object *obj, int err,
char *buf, size_t size);
int bpf__foreach_event(struct bpf_object *obj,
bpf_prog_iter_callback_t func, void *arg);
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
int bpf__config_obj(struct bpf_object *obj, struct parse_events_term *term,
struct evlist *evlist, int *error_pos);
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
int bpf__strerror_config_obj(struct bpf_object *obj,
struct parse_events_term *term,
struct evlist *evlist,
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
int *error_pos, int err, char *buf,
size_t size);
perf record: Apply config to BPF objects before recording bpf__apply_obj_config() is introduced as the core API to apply object config options to all BPF objects. This patch also does the real work for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value stored in map's private field into the BPF map. This patch is required because we are not always able to set all BPF config during parsing. Further patch will set events created by perf to BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until perf_evsel__open(). bpf_map_foreach_key() is introduced to iterate over each key needs to be configured. This function would be extended to support more map types and different key settings. In perf record, before start recording, call bpf__apply_config() to turn on all BPF config options. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ # echo "" > /sys/kernel/debug/tracing/trace # ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 # ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 usleep-19000 [006] d... 2394831.057840: : 101 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:32 +08:00
int bpf__apply_obj_config(void);
int bpf__strerror_apply_obj_config(int err, char *buf, size_t size);
int bpf__setup_stdout(struct evlist *evlist);
struct evsel *bpf__setup_output_event(struct evlist *evlist, const char *name);
int bpf__strerror_setup_output_event(struct evlist *evlist, int err, char *buf, size_t size);
#else
#include <errno.h>
#include <string.h>
#include "debug.h"
static inline struct bpf_object *
perf tools: Compile scriptlets to BPF objects when passing '.c' to --event This patch provides infrastructure for passing source files to --event directly using: # perf record --event bpf-file.c command This patch does following works: 1) Allow passing '.c' file to '--event'. parse_events_load_bpf() is expanded to allow caller tell it whether the passed file is source file or object. 2) llvm__compile_bpf() is called to compile the '.c' file, the result is saved into memory. Use bpf_object__open_buffer() to load the in-memory object. Introduces a bpf-script-example.c so we can manually test it: # perf record --clang-opt "-DLINUX_VERSION_CODE=0x40200" --event ./bpf-script-example.c sleep 1 Note that '--clang-opt' must put before '--event'. Futher patches will merge it into a testcase so can be tested automatically. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-10-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:20 +08:00
bpf__prepare_load(const char *filename __maybe_unused,
bool source __maybe_unused)
{
pr_debug("ERROR: eBPF object loading is disabled during compiling.\n");
return ERR_PTR(-ENOTSUP);
}
static inline struct bpf_object *
bpf__prepare_load_buffer(void *obj_buf __maybe_unused,
size_t obj_buf_sz __maybe_unused)
{
return ERR_PTR(-ENOTSUP);
}
static inline void bpf__clear(void) { }
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
static inline int bpf__probe(struct bpf_object *obj __maybe_unused) { return 0;}
static inline int bpf__unprobe(struct bpf_object *obj __maybe_unused) { return 0;}
perf tools: Load eBPF object into kernel This patch utilizes bpf_object__load() provided by libbpf to load all objects into kernel. Committer notes: Testing it: When using an incorrect kernel version number, i.e., having this in your eBPF proggie: int _version __attribute__((section("version"), used)) = 0x40100; For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event parsing time, to provide a better error report to the user: # perf record --event /tmp/foo.o sleep 1 libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: libbpf: -- END LOG -- libbpf: failed to load program 'fork=_do_fork' libbpf: failed to load object '/tmp/foo.o' event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+ kernel, the whole process goes thru: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.202 MB perf.data ] # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:16 +08:00
static inline int bpf__load(struct bpf_object *obj __maybe_unused) { return 0; }
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
perf bpf: Collect perf_evsel in BPF object files This patch creates a 'struct perf_evsel' for every probe in a BPF object file(s) and fills 'struct evlist' with them. The previously introduced dummy event is now removed. After this patch, the following command: # perf record --event filter.o ls Can trace on each of the probes defined in filter.o. The core of this patch is bpf__foreach_tev(), which calls a callback function for each 'struct probe_trace_event' event for a bpf program with each associated file descriptors. The add_bpf_event() callback creates evsels by calling parse_events_add_tracepoint(). Since bpf-loader.c will not be built if libbpf is turned off, an empty bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors. Committer notes: Before: # /tmp/oldperf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.198 MB perf.data ] # perf evlist /tmp/foo.o # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 I.e. we create just the PERF_TYPE_SOFTWARE (type: 1), PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.210 MB perf.data ] # perf evlist -v perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd, which is how, after setting up the event via the kprobes interface, the 'perf_bpf_probe:fork' event is accessible via the perf_event_open syscall. This is all transient, as soon as the 'perf record' session ends, these probes will go away. To see how it looks like, lets try doing a neverending session, one that expects a control+C to end: # perf record --event /tmp/foo.o -a So, with that in place, we can use 'perf probe' to see what is in place: # perf probe -l perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c) We also can use debugfs: [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events p:perf_bpf_probe/fork _text+638512 Ok, now lets stop and see if we got some forks: [root@felicio linux]# perf record --event /tmp/foo.o -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ] [root@felicio linux]# perf script sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30) <SNIP> Sure enough, we have 111 forks :-) Callchains seems to work as well: # perf report --stdio --no-child # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 562 of event 'perf_bpf_probe:fork' # Event count (approx.): 562 # # Overhead Command Shared Object Symbol # ........ ........ ................ ............ # 44.66% sh [kernel.vmlinux] [k] _do_fork | ---_do_fork entry_SYSCALL_64_fastpath __libc_fork make_child 26.16% make [kernel.vmlinux] [k] _do_fork <SNIP> # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:17 +08:00
static inline int
bpf__foreach_event(struct bpf_object *obj __maybe_unused,
bpf_prog_iter_callback_t func __maybe_unused,
void *arg __maybe_unused)
perf bpf: Collect perf_evsel in BPF object files This patch creates a 'struct perf_evsel' for every probe in a BPF object file(s) and fills 'struct evlist' with them. The previously introduced dummy event is now removed. After this patch, the following command: # perf record --event filter.o ls Can trace on each of the probes defined in filter.o. The core of this patch is bpf__foreach_tev(), which calls a callback function for each 'struct probe_trace_event' event for a bpf program with each associated file descriptors. The add_bpf_event() callback creates evsels by calling parse_events_add_tracepoint(). Since bpf-loader.c will not be built if libbpf is turned off, an empty bpf__foreach_tev() is defined in bpf-loader.h to avoid build errors. Committer notes: Before: # /tmp/oldperf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.198 MB perf.data ] # perf evlist /tmp/foo.o # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 I.e. we create just the PERF_TYPE_SOFTWARE (type: 1), PERF_COUNT_SW_DUMMY(config 0x9) event, now, with this patch: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.210 MB perf.data ] # perf evlist -v perf_bpf_probe:fork: type: 2, size: 112, config: 0x6bd, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # We now have a PERF_TYPE_SOFTWARE (type: 1), but the config states 0x6bd, which is how, after setting up the event via the kprobes interface, the 'perf_bpf_probe:fork' event is accessible via the perf_event_open syscall. This is all transient, as soon as the 'perf record' session ends, these probes will go away. To see how it looks like, lets try doing a neverending session, one that expects a control+C to end: # perf record --event /tmp/foo.o -a So, with that in place, we can use 'perf probe' to see what is in place: # perf probe -l perf_bpf_probe:fork (on _do_fork@acme/git/linux/kernel/fork.c) We also can use debugfs: [root@felicio ~]# cat /sys/kernel/debug/tracing/kprobe_events p:perf_bpf_probe/fork _text+638512 Ok, now lets stop and see if we got some forks: [root@felicio linux]# perf record --event /tmp/foo.o -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.325 MB perf.data (111 samples) ] [root@felicio linux]# perf script sshd 1271 [003] 81797.507678: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [000] 81797.524917: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.381603: perf_bpf_probe:fork: (ffffffff8109be30) sshd 18309 [001] 81799.408635: perf_bpf_probe:fork: (ffffffff8109be30) <SNIP> Sure enough, we have 111 forks :-) Callchains seems to work as well: # perf report --stdio --no-child # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 562 of event 'perf_bpf_probe:fork' # Event count (approx.): 562 # # Overhead Command Shared Object Symbol # ........ ........ ................ ............ # 44.66% sh [kernel.vmlinux] [k] _do_fork | ---_do_fork entry_SYSCALL_64_fastpath __libc_fork make_child 26.16% make [kernel.vmlinux] [k] _do_fork <SNIP> # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-7-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:17 +08:00
{
return 0;
}
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
static inline int
bpf__config_obj(struct bpf_object *obj __maybe_unused,
struct parse_events_term *term __maybe_unused,
struct evlist *evlist __maybe_unused,
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
int *error_pos __maybe_unused)
{
return 0;
}
perf record: Apply config to BPF objects before recording bpf__apply_obj_config() is introduced as the core API to apply object config options to all BPF objects. This patch also does the real work for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value stored in map's private field into the BPF map. This patch is required because we are not always able to set all BPF config during parsing. Further patch will set events created by perf to BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until perf_evsel__open(). bpf_map_foreach_key() is introduced to iterate over each key needs to be configured. This function would be extended to support more map types and different key settings. In perf record, before start recording, call bpf__apply_config() to turn on all BPF config options. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ # echo "" > /sys/kernel/debug/tracing/trace # ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 # ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 usleep-19000 [006] d... 2394831.057840: : 101 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:32 +08:00
static inline int
bpf__apply_obj_config(void)
{
return 0;
}
static inline int
bpf__setup_stdout(struct evlist *evlist __maybe_unused)
{
return 0;
}
static inline struct evsel *
bpf__setup_output_event(struct evlist *evlist __maybe_unused, const char *name __maybe_unused)
{
return NULL;
}
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
static inline int
__bpf_strerror(char *buf, size_t size)
{
if (!size)
return 0;
strncpy(buf,
"ERROR: eBPF object loading is disabled during compiling.\n",
size);
buf[size - 1] = '\0';
return 0;
}
perf bpf: Improve BPF related error messages A series of bpf loader related error codes were introduced to help error reporting. Functions were improved to return these new error codes. Functions which return pointers were adjusted to encode error codes into return value using the ERR_PTR() interface. bpf_loader_strerror() was improved to convert these error messages to strings. It checks the error codes and calls libbpf_strerror() and strerror_r() accordingly, so caller don't need to consider checking the range of the error code. In bpf__strerror_load(), print kernel version of running kernel and the object's 'version' section to notify user how to fix his/her program. v1 -> v2: Use macro for error code. Fetch error message based on array index, eliminate for-loop. Print version strings. Before: # perf record -e ./test_kversion_nomatch_program.o sleep 1 event syntax error: './test_kversion_nomatch_program.o' \___ Failed to load program: Validate your program and check 'license'/'version' sections in your object SKIP After: # perf record -e ./test_kversion_nomatch_program.o ls event syntax error: './test_kversion_nomatch_program.o' \___ 'version' (4.4.0) doesn't match running kernel (4.3.0) SKIP Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1446818289-87444-1-git-send-email-wangnan0@huawei.com [ Add 'static inline' to bpf__strerror_prepare_load() when LIBBPF is disabled ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-06 21:58:09 +08:00
static inline
int bpf__strerror_prepare_load(const char *filename __maybe_unused,
bool source __maybe_unused,
int err __maybe_unused,
char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
perf tools: Create probe points for BPF programs This patch introduces bpf__{un,}probe() functions to enable callers to create kprobe points based on section names a BPF program. It parses the section names in the program and creates corresponding 'struct perf_probe_event' structures. The parse_perf_probe_command() function is used to do the main parsing work. The resuling 'struct perf_probe_event' is stored into program private data for further using. By utilizing the new probing API, this patch creates probe points during event parsing. To ensure probe points be removed correctly, register an atexit hook so even perf quit through exit() bpf__clear() is still called, so probing points are cleared. Note that bpf_clear() should be registered before bpf__probe() is called, so failure of bpf__probe() can still trigger bpf__clear() to remove probe points which are already probed. strerror style error reporting scaffold is created by this patch. bpf__strerror_probe() is the first error reporting function in bpf-loader.c. Committer note: Trying it: To build a test eBPF object file: I am testing using a script I built from the 'perf test -v LLVM' output: $ cat ~/bin/hello-ebpf export KERNEL_INC_OPTIONS="-nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.8.3/include -I/home/acme/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/acme/git/linux/include -Iinclude -I/home/acme/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -Iinclude/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h" export WORKING_DIR=/lib/modules/4.2.0/build export CLANG_SOURCE=- export CLANG_OPTIONS=-xc OBJ=/tmp/foo.o rm -f $OBJ echo '__attribute__((section("fork=do_fork"), used)) int fork(void *ctx) {return 0;} char _license[] __attribute__((section("license"), used)) = "GPL";int _version __attribute__((section("version"), used)) = 0x40100;' | \ clang -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o /tmp/foo.o && file $OBJ --- First asking to put a probe in a function not present in the kernel (misses the initial _): $ perf record --event /tmp/foo.o sleep 1 Probe point 'do_fork' not found. event syntax error: '/tmp/foo.o' \___ You need to check probing points in BPF file (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events $ --- Now, with "__attribute__((section("fork=_do_fork"), used)): $ grep _do_fork /proc/kallsyms ffffffff81099ab0 T _do_fork $ perf record --event /tmp/foo.o sleep 1 Failed to open kprobe_events: Permission denied event syntax error: '/tmp/foo.o' \___ Permission denied --- Cool, we need to provide some better hints, "kprobe_events" is too low level, one doesn't strictly need to know the precise details of how these things are put in place, so something that shows the command needed to fix the permissions would be more helpful. Lets try as root instead: # perf record --event /tmp/foo.o sleep 1 Lowering default frequency rate to 1000. Please consider tweaking /proc/sys/kernel/perf_event_max_sample_rate. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.013 MB perf.data ] # perf evlist /tmp/foo.o [root@felicio ~]# perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 --- Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-5-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:15 +08:00
static inline int
bpf__strerror_probe(struct bpf_object *obj __maybe_unused,
int err __maybe_unused,
char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
perf tools: Load eBPF object into kernel This patch utilizes bpf_object__load() provided by libbpf to load all objects into kernel. Committer notes: Testing it: When using an incorrect kernel version number, i.e., having this in your eBPF proggie: int _version __attribute__((section("version"), used)) = 0x40100; For a 4.3.0-rc6+ kernel, say, this happens and needs checking at event parsing time, to provide a better error report to the user: # perf record --event /tmp/foo.o sleep 1 libbpf: load bpf program failed: Invalid argument libbpf: -- BEGIN DUMP LOG --- libbpf: libbpf: -- END LOG -- libbpf: failed to load program 'fork=_do_fork' libbpf: failed to load object '/tmp/foo.o' event syntax error: '/tmp/foo.o' \___ Invalid argument: Are you root and runing a CONFIG_BPF_SYSCALL kernel? (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events If we instead make it match, i.e. use 0x40300 on this v4.3.0-rc6+ kernel, the whole process goes thru: # perf record --event /tmp/foo.o -a usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.202 MB perf.data ] # perf evlist -v /tmp/foo.o: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 20:41:16 +08:00
static inline int bpf__strerror_load(struct bpf_object *obj __maybe_unused,
int err __maybe_unused,
char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
static inline int
bpf__strerror_config_obj(struct bpf_object *obj __maybe_unused,
struct parse_events_term *term __maybe_unused,
struct evlist *evlist __maybe_unused,
perf bpf: Add API to set values to map entries in a bpf object bpf__config_obj() is introduced as a core API to config BPF object after loading. One configuration option of maps is introduced. After this patch BPF object can accept assignments like: map:my_map.value=1234 (map.my_map.value looks pretty. However, there's a small but hard to fix problem related to flex's greedy matching. Please see [1]. Choose ':' to avoid it in a simpler way.) This patch is more complex than the work it does because the consideration of extension. In designing BPF map configuration, the following things should be considered: 1. Array indices selection: perf should allow user setting different value for different slots in an array, with syntax like: map:my_map.value[0,3...6]=1234; 2. A map should be set by different config terms, each for a part of it. For example, set each slot to the pid of a thread; 3. Type of value: integer is not the only valid value type. A perf counter can also be put into a map after commit 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU counter") 4. For a hash table, it should be possible to use a string or other value as a key; 5. It is possible that map configuration is unable to be setup during parsing. A perf counter is an example. Therefore, this patch does the following: 1. Instead of updating map element during parsing, this patch stores map config options in 'struct bpf_map_priv'. Following patches will apply those configs at an appropriate time; 2. Link map operations in a list so a map can have multiple config terms attached, so different parts can be configured separately; 3. Make 'struct bpf_map_priv' extensible so that the following patches can add new types of keys and operations; 4. Use bpf_obj_config__map_funcs array to support more map config options. Since the patch changing the event parser to parse BPF object config is relative large, I've put it in another commit. Code in this patch can be tested after applying the next patch. [1] http://lkml.kernel.org/g/564ED621.4050500@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-4-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> [ Changes "maps:my_map.value" to "map:my_map.value", improved error messages ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:30 +08:00
int *error_pos __maybe_unused,
int err __maybe_unused,
char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
perf record: Apply config to BPF objects before recording bpf__apply_obj_config() is introduced as the core API to apply object config options to all BPF objects. This patch also does the real work for setting values for BPF_MAP_TYPE_PERF_ARRAY maps by inserting value stored in map's private field into the BPF map. This patch is required because we are not always able to set all BPF config during parsing. Further patch will set events created by perf to BPF_MAP_TYPE_PERF_EVENT_ARRAY maps, which is not exist until perf_evsel__open(). bpf_map_foreach_key() is introduced to iterate over each key needs to be configured. This function would be extended to support more map types and different key settings. In perf record, before start recording, call bpf__apply_config() to turn on all BPF config options. Test result: # cat ./test_bpf_map_1.c /************************ BEGIN **************************/ #include <uapi/linux/bpf.h> #define SEC(NAME) __attribute__((section(NAME), used)) struct bpf_map_def { unsigned int type; unsigned int key_size; unsigned int value_size; unsigned int max_entries; }; static void *(*map_lookup_elem)(struct bpf_map_def *, void *) = (void *)BPF_FUNC_map_lookup_elem; static int (*trace_printk)(const char *fmt, int fmt_size, ...) = (void *)BPF_FUNC_trace_printk; struct bpf_map_def SEC("maps") channel = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), .value_size = sizeof(int), .max_entries = 1, }; SEC("func=sys_nanosleep") int func(void *ctx) { int key = 0; char fmt[] = "%d\n"; int *pval = map_lookup_elem(&channel, &key); if (!pval) return 0; trace_printk(fmt, sizeof(fmt), *pval); return 0; } char _license[] SEC("license") = "GPL"; int _version SEC("version") = LINUX_VERSION_CODE; /************************* END ***************************/ # echo "" > /sys/kernel/debug/tracing/trace # ./perf record -e './test_bpf_map_1.c/map:channel.value=11/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 # ./perf record -e './test_bpf_map_1.c/map:channel.value=101/' usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB perf.data ] # cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 1/1 #P:8 [SNIP] # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | usleep-18593 [007] d... 2394714.395539: : 11 usleep-19000 [006] d... 2394831.057840: : 101 Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1456132275-98875-6-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 17:10:32 +08:00
static inline int
bpf__strerror_apply_obj_config(int err __maybe_unused,
char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
static inline int
bpf__strerror_setup_output_event(struct evlist *evlist __maybe_unused,
int err __maybe_unused, char *buf, size_t size)
{
return __bpf_strerror(buf, size);
}
#endif
static inline int bpf__strerror_setup_stdout(struct evlist *evlist, int err, char *buf, size_t size)
{
return bpf__strerror_setup_output_event(evlist, err, buf, size);
}
#endif