kernel_optimize_test/include/asm-generic/fcntl.h

185 lines
4.2 KiB
C
Raw Normal View History

#ifndef _ASM_GENERIC_FCNTL_H
#define _ASM_GENERIC_FCNTL_H
#include <linux/types.h>
#define O_ACCMODE 00000003
#define O_RDONLY 00000000
#define O_WRONLY 00000001
#define O_RDWR 00000002
#ifndef O_CREAT
#define O_CREAT 00000100 /* not fcntl */
#endif
#ifndef O_EXCL
#define O_EXCL 00000200 /* not fcntl */
#endif
#ifndef O_NOCTTY
#define O_NOCTTY 00000400 /* not fcntl */
#endif
#ifndef O_TRUNC
#define O_TRUNC 00001000 /* not fcntl */
#endif
#ifndef O_APPEND
#define O_APPEND 00002000
#endif
#ifndef O_NONBLOCK
#define O_NONBLOCK 00004000
#endif
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 18:05:28 +08:00
#ifndef O_DSYNC
#define O_DSYNC 00010000 /* used to be O_SYNC, see below */
#endif
#ifndef FASYNC
#define FASYNC 00020000 /* fcntl, for BSD compatibility */
#endif
#ifndef O_DIRECT
#define O_DIRECT 00040000 /* direct disk access hint */
#endif
#ifndef O_LARGEFILE
#define O_LARGEFILE 00100000
#endif
#ifndef O_DIRECTORY
#define O_DIRECTORY 00200000 /* must be a directory */
#endif
#ifndef O_NOFOLLOW
#define O_NOFOLLOW 00400000 /* don't follow links */
#endif
#ifndef O_NOATIME
#define O_NOATIME 01000000
#endif
Introduce O_CLOEXEC The problem is as follows: in multi-threaded code (or more correctly: all code using clone() with CLONE_FILES) we have a race when exec'ing. thread #1 thread #2 fd=open() fork + exec fcntl(fd,F_SETFD,FD_CLOEXEC) In some applications this can happen frequently. Take a web browser. One thread opens a file and another thread starts, say, an external PDF viewer. The result can even be a security issue if that open file descriptor refers to a sensitive file and the external program can somehow be tricked into using that descriptor. Just adding O_CLOEXEC support to open() doesn't solve the whole set of problems. There are other ways to create file descriptors (socket, epoll_create, Unix domain socket transfer, etc). These can and should be addressed separately though. open() is such an easy case that it makes not much sense putting the fix off. The test program: #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <unistd.h> #ifndef O_CLOEXEC # define O_CLOEXEC 02000000 #endif int main (int argc, char *argv[]) { int fd; if (argc > 1) { fd = atol (argv[1]); printf ("child: fd = %d\n", fd); if (fcntl (fd, F_GETFD) == 0 || errno != EBADF) { puts ("file descriptor valid in child"); return 1; } return 0; } fd = open ("/proc/self/exe", O_RDONLY | O_CLOEXEC); printf ("in parent: new fd = %d\n", fd); char buf[20]; snprintf (buf, sizeof (buf), "%d", fd); execl ("/proc/self/exe", argv[0], buf, NULL); puts ("execl failed"); return 1; } [kyle@parisc-linux.org: parisc fix] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 14:40:32 +08:00
#ifndef O_CLOEXEC
#define O_CLOEXEC 02000000 /* set close_on_exec */
#endif
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 18:05:28 +08:00
/*
* Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
vfs: Implement proper O_SYNC semantics While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-10-27 18:05:28 +08:00
* the O_SYNC flag. We continue to use the existing numerical value
* for O_DSYNC semantics now, but using the correct symbolic name for it.
* This new value is used to request true Posix O_SYNC semantics. It is
* defined in this strange way to make sure applications compiled against
* new headers get at least O_DSYNC semantics on older kernels.
*
* This has the nice side-effect that we can simply test for O_DSYNC
* wherever we do not care if O_DSYNC or O_SYNC is used.
*
* Note: __O_SYNC must never be used directly.
*/
#ifndef O_SYNC
#define __O_SYNC 04000000
#define O_SYNC (__O_SYNC|O_DSYNC)
#endif
#ifndef O_NDELAY
#define O_NDELAY O_NONBLOCK
#endif
#define F_DUPFD 0 /* dup */
#define F_GETFD 1 /* get close_on_exec */
#define F_SETFD 2 /* set/clear close_on_exec */
#define F_GETFL 3 /* get file->f_flags */
#define F_SETFL 4 /* set file->f_flags */
#ifndef F_GETLK
#define F_GETLK 5
#define F_SETLK 6
#define F_SETLKW 7
#endif
#ifndef F_SETOWN
#define F_SETOWN 8 /* for sockets. */
#define F_GETOWN 9 /* for sockets. */
#endif
#ifndef F_SETSIG
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
#endif
#ifndef CONFIG_64BIT
#ifndef F_GETLK64
#define F_GETLK64 12 /* using 'struct flock64' */
#define F_SETLK64 13
#define F_SETLKW64 14
#endif
#endif
#ifndef F_SETOWN_EX
#define F_SETOWN_EX 15
#define F_GETOWN_EX 16
#endif
#define F_OWNER_TID 0
#define F_OWNER_PID 1
#define F_OWNER_PGRP 2
struct f_owner_ex {
int type;
pid_t pid;
};
/* for F_[GET|SET]FL */
#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
/* for posix fcntl() and lockf() */
#ifndef F_RDLCK
#define F_RDLCK 0
#define F_WRLCK 1
#define F_UNLCK 2
#endif
/* for old implementation of bsd flock () */
#ifndef F_EXLCK
#define F_EXLCK 4 /* or 3 */
#define F_SHLCK 8 /* or 4 */
#endif
/* for leases */
#ifndef F_INPROGRESS
#define F_INPROGRESS 16
#endif
/* operations for bsd flock(), also used by the kernel implementation */
#define LOCK_SH 1 /* shared lock */
#define LOCK_EX 2 /* exclusive lock */
#define LOCK_NB 4 /* or'd with one of the above to prevent
blocking */
#define LOCK_UN 8 /* remove lock */
#define LOCK_MAND 32 /* This is a mandatory flock ... */
#define LOCK_READ 64 /* which allows concurrent read operations */
#define LOCK_WRITE 128 /* which allows concurrent write operations */
#define LOCK_RW 192 /* which allows concurrent read & write ops */
#define F_LINUX_SPECIFIC_BASE 1024
#ifndef HAVE_ARCH_STRUCT_FLOCK
#ifndef __ARCH_FLOCK_PAD
#define __ARCH_FLOCK_PAD
#endif
struct flock {
short l_type;
short l_whence;
__kernel_off_t l_start;
__kernel_off_t l_len;
__kernel_pid_t l_pid;
__ARCH_FLOCK_PAD
};
#endif
#ifndef CONFIG_64BIT
#ifndef HAVE_ARCH_STRUCT_FLOCK64
#ifndef __ARCH_FLOCK64_PAD
#define __ARCH_FLOCK64_PAD
#endif
struct flock64 {
short l_type;
short l_whence;
__kernel_loff_t l_start;
__kernel_loff_t l_len;
__kernel_pid_t l_pid;
__ARCH_FLOCK64_PAD
};
#endif
#endif /* !CONFIG_64BIT */
#endif /* _ASM_GENERIC_FCNTL_H */