2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* PCI Express Hot Plug Controller Driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
|
|
* Copyright (C) 2001 IBM Corp.
|
|
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
|
|
*
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
|
|
* your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but
|
|
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
|
|
* details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*
|
2005-08-17 06:16:10 +08:00
|
|
|
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
|
2005-04-17 06:20:36 +08:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
#ifndef _PCIEHP_H
|
|
|
|
#define _PCIEHP_H
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/pci.h>
|
2006-10-14 11:05:19 +08:00
|
|
|
#include <linux/pci_hotplug.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/delay.h>
|
2006-01-08 17:02:05 +08:00
|
|
|
#include <linux/sched.h> /* signal_pending() */
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/pcieport_if.h>
|
2006-01-13 23:02:15 +08:00
|
|
|
#include <linux/mutex.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#define MY_NAME "pciehp"
|
|
|
|
|
|
|
|
extern int pciehp_poll_mode;
|
|
|
|
extern int pciehp_poll_time;
|
|
|
|
extern int pciehp_debug;
|
2005-11-01 08:20:12 +08:00
|
|
|
extern int pciehp_force;
|
2007-03-07 07:02:26 +08:00
|
|
|
extern struct workqueue_struct *pciehp_wq;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2006-12-22 09:01:07 +08:00
|
|
|
#define dbg(format, arg...) \
|
2009-02-06 17:23:36 +08:00
|
|
|
do { \
|
|
|
|
if (pciehp_debug) \
|
|
|
|
printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); \
|
|
|
|
} while (0)
|
2006-12-22 09:01:07 +08:00
|
|
|
#define err(format, arg...) \
|
|
|
|
printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
|
|
|
|
#define info(format, arg...) \
|
|
|
|
printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
|
|
|
|
#define warn(format, arg...) \
|
|
|
|
printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-09-05 11:11:26 +08:00
|
|
|
#define ctrl_dbg(ctrl, format, arg...) \
|
|
|
|
do { \
|
|
|
|
if (pciehp_debug) \
|
2009-02-06 17:23:36 +08:00
|
|
|
dev_printk(KERN_DEBUG, &ctrl->pcie->device, \
|
2008-09-05 11:11:26 +08:00
|
|
|
format, ## arg); \
|
|
|
|
} while (0)
|
|
|
|
#define ctrl_err(ctrl, format, arg...) \
|
|
|
|
dev_err(&ctrl->pcie->device, format, ## arg)
|
|
|
|
#define ctrl_info(ctrl, format, arg...) \
|
|
|
|
dev_info(&ctrl->pcie->device, format, ## arg)
|
|
|
|
#define ctrl_warn(ctrl, format, arg...) \
|
|
|
|
dev_warn(&ctrl->pcie->device, format, ## arg)
|
|
|
|
|
2006-12-22 09:01:02 +08:00
|
|
|
#define SLOT_NAME_SIZE 10
|
2005-04-17 06:20:36 +08:00
|
|
|
struct slot {
|
|
|
|
u8 bus;
|
|
|
|
u8 device;
|
|
|
|
u8 state;
|
|
|
|
u8 hp_slot;
|
2008-10-21 07:41:38 +08:00
|
|
|
u32 number;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct controller *ctrl;
|
|
|
|
struct hpc_ops *hpc_ops;
|
|
|
|
struct hotplug_slot *hotplug_slot;
|
|
|
|
struct list_head slot_list;
|
2007-03-07 07:02:26 +08:00
|
|
|
struct delayed_work work; /* work for button event */
|
|
|
|
struct mutex lock;
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct event_info {
|
|
|
|
u32 event_type;
|
2007-03-07 07:02:26 +08:00
|
|
|
struct slot *p_slot;
|
|
|
|
struct work_struct work;
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct controller {
|
2006-01-13 23:02:15 +08:00
|
|
|
struct mutex crit_sect; /* critical section mutex */
|
2006-09-23 01:17:29 +08:00
|
|
|
struct mutex ctrl_lock; /* controller lock */
|
2005-04-17 06:20:36 +08:00
|
|
|
int num_slots; /* Number of slots on ctlr */
|
|
|
|
int slot_num_inc; /* 1 or -1 */
|
|
|
|
struct pci_dev *pci_dev;
|
2008-08-22 16:16:48 +08:00
|
|
|
struct pcie_device *pcie; /* PCI Express port service */
|
2006-12-22 09:01:03 +08:00
|
|
|
struct list_head slot_list;
|
2005-04-17 06:20:36 +08:00
|
|
|
struct hpc_ops *hpc_ops;
|
|
|
|
wait_queue_head_t queue; /* sleep & wake process */
|
|
|
|
u8 slot_device_offset;
|
|
|
|
u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
|
|
|
|
u8 slot_bus; /* Bus where the slots handled by this controller sit */
|
2008-04-26 05:39:06 +08:00
|
|
|
u32 slot_cap;
|
2005-05-07 08:19:09 +08:00
|
|
|
u8 cap_base;
|
2006-12-22 09:01:04 +08:00
|
|
|
struct timer_list poll_timer;
|
2009-02-03 14:06:18 +08:00
|
|
|
unsigned int cmd_busy:1;
|
pciehp: fix slow probing
Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in
http://bugzilla.kernel.org/show_bug.cgi?id=10751.
The command completed bit in Slot Status register applies only to
commands issued to control the attention indicator, power indicator,
power controller, or electromechanical interlock. However, writes to
other parts of the Slot Control register would end up writing to the
control fields. Hence, any write to Slot Control register is
considered as a command. However, if the controller doesn't support
any of attention indicator, power indicator, power controller and
electromechanical interlock, command completed bit would not set in
writing to Slot Control register. In this case, we should not wait for
command completed bit set, otherwise all commands would be considered
not completed in timeout seconds (1 sec.).
The cause of the problem is pciehp driver didn't take this situation
into account. This patch changes pciehp to take it into account. This
patch also add the check for "No Command Completed Support" bit in
Slot Capability register. If it is set, we should not wait for command
completed bit set as well.
This problem seems to be revealed by the commit
c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that
pciehp did not wait for command completed properly (pciehp just
ignored the command completion event).
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27 18:04:30 +08:00
|
|
|
unsigned int no_cmd_complete:1;
|
2008-10-22 13:31:44 +08:00
|
|
|
unsigned int link_active_reporting:1;
|
2009-01-29 11:31:18 +08:00
|
|
|
unsigned int notification_enabled:1;
|
2009-02-03 14:06:16 +08:00
|
|
|
unsigned int power_fault_detected;
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define INT_BUTTON_IGNORE 0
|
|
|
|
#define INT_PRESENCE_ON 1
|
|
|
|
#define INT_PRESENCE_OFF 2
|
|
|
|
#define INT_SWITCH_CLOSE 3
|
|
|
|
#define INT_SWITCH_OPEN 4
|
|
|
|
#define INT_POWER_FAULT 5
|
|
|
|
#define INT_POWER_FAULT_CLEAR 6
|
|
|
|
#define INT_BUTTON_PRESS 7
|
|
|
|
#define INT_BUTTON_RELEASE 8
|
|
|
|
#define INT_BUTTON_CANCEL 9
|
|
|
|
|
|
|
|
#define STATIC_STATE 0
|
|
|
|
#define BLINKINGON_STATE 1
|
|
|
|
#define BLINKINGOFF_STATE 2
|
|
|
|
#define POWERON_STATE 3
|
|
|
|
#define POWEROFF_STATE 4
|
|
|
|
|
|
|
|
/* Error messages */
|
|
|
|
#define INTERLOCK_OPEN 0x00000002
|
|
|
|
#define ADD_NOT_SUPPORTED 0x00000003
|
|
|
|
#define CARD_FUNCTIONING 0x00000005
|
|
|
|
#define ADAPTER_NOT_SAME 0x00000006
|
|
|
|
#define NO_ADAPTER_PRESENT 0x00000009
|
|
|
|
#define NOT_ENOUGH_RESOURCES 0x0000000B
|
|
|
|
#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
|
|
|
|
#define WRONG_BUS_FREQUENCY 0x0000000D
|
|
|
|
#define POWER_FAILURE 0x0000000E
|
|
|
|
|
|
|
|
/* Field definitions in Slot Capabilities Register */
|
|
|
|
#define ATTN_BUTTN_PRSN 0x00000001
|
|
|
|
#define PWR_CTRL_PRSN 0x00000002
|
|
|
|
#define MRL_SENS_PRSN 0x00000004
|
|
|
|
#define ATTN_LED_PRSN 0x00000008
|
|
|
|
#define PWR_LED_PRSN 0x00000010
|
|
|
|
#define HP_SUPR_RM_SUP 0x00000020
|
2007-01-10 05:02:36 +08:00
|
|
|
#define EMI_PRSN 0x00020000
|
pciehp: fix slow probing
Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in
http://bugzilla.kernel.org/show_bug.cgi?id=10751.
The command completed bit in Slot Status register applies only to
commands issued to control the attention indicator, power indicator,
power controller, or electromechanical interlock. However, writes to
other parts of the Slot Control register would end up writing to the
control fields. Hence, any write to Slot Control register is
considered as a command. However, if the controller doesn't support
any of attention indicator, power indicator, power controller and
electromechanical interlock, command completed bit would not set in
writing to Slot Control register. In this case, we should not wait for
command completed bit set, otherwise all commands would be considered
not completed in timeout seconds (1 sec.).
The cause of the problem is pciehp driver didn't take this situation
into account. This patch changes pciehp to take it into account. This
patch also add the check for "No Command Completed Support" bit in
Slot Capability register. If it is set, we should not wait for command
completed bit set as well.
This problem seems to be revealed by the commit
c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that
pciehp did not wait for command completed properly (pciehp just
ignored the command completion event).
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27 18:04:30 +08:00
|
|
|
#define NO_CMD_CMPL_SUP 0x00040000
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-04-26 05:39:06 +08:00
|
|
|
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
|
|
|
|
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
|
|
|
|
#define MRL_SENS(ctrl) ((ctrl)->slot_cap & MRL_SENS_PRSN)
|
|
|
|
#define ATTN_LED(ctrl) ((ctrl)->slot_cap & ATTN_LED_PRSN)
|
|
|
|
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
|
|
|
|
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
|
|
|
|
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
|
pciehp: fix slow probing
Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in
http://bugzilla.kernel.org/show_bug.cgi?id=10751.
The command completed bit in Slot Status register applies only to
commands issued to control the attention indicator, power indicator,
power controller, or electromechanical interlock. However, writes to
other parts of the Slot Control register would end up writing to the
control fields. Hence, any write to Slot Control register is
considered as a command. However, if the controller doesn't support
any of attention indicator, power indicator, power controller and
electromechanical interlock, command completed bit would not set in
writing to Slot Control register. In this case, we should not wait for
command completed bit set, otherwise all commands would be considered
not completed in timeout seconds (1 sec.).
The cause of the problem is pciehp driver didn't take this situation
into account. This patch changes pciehp to take it into account. This
patch also add the check for "No Command Completed Support" bit in
Slot Capability register. If it is set, we should not wait for command
completed bit set as well.
This problem seems to be revealed by the commit
c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that
pciehp did not wait for command completed properly (pciehp just
ignored the command completion event).
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27 18:04:30 +08:00
|
|
|
#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-03-07 07:02:26 +08:00
|
|
|
extern int pciehp_sysfs_enable_slot(struct slot *slot);
|
|
|
|
extern int pciehp_sysfs_disable_slot(struct slot *slot);
|
2008-05-27 18:03:16 +08:00
|
|
|
extern u8 pciehp_handle_attention_button(struct slot *p_slot);
|
|
|
|
extern u8 pciehp_handle_switch_change(struct slot *p_slot);
|
|
|
|
extern u8 pciehp_handle_presence_change(struct slot *p_slot);
|
|
|
|
extern u8 pciehp_handle_power_fault(struct slot *p_slot);
|
2006-12-22 09:01:07 +08:00
|
|
|
extern int pciehp_configure_device(struct slot *p_slot);
|
|
|
|
extern int pciehp_unconfigure_device(struct slot *p_slot);
|
2007-03-22 02:45:31 +08:00
|
|
|
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
|
2008-06-20 11:07:08 +08:00
|
|
|
struct controller *pcie_init(struct pcie_device *dev);
|
2009-01-29 11:31:18 +08:00
|
|
|
int pcie_init_notification(struct controller *ctrl);
|
2007-11-29 07:11:28 +08:00
|
|
|
int pciehp_enable_slot(struct slot *p_slot);
|
2007-11-29 07:12:00 +08:00
|
|
|
int pciehp_disable_slot(struct slot *p_slot);
|
2008-06-20 11:07:08 +08:00
|
|
|
int pcie_enable_notification(struct controller *ctrl);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-10-21 07:41:38 +08:00
|
|
|
static inline const char *slot_name(struct slot *slot)
|
|
|
|
{
|
|
|
|
return hotplug_slot_name(slot->hotplug_slot);
|
|
|
|
}
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
|
|
|
|
{
|
2006-12-22 09:01:03 +08:00
|
|
|
struct slot *slot;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2006-12-22 09:01:03 +08:00
|
|
|
list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
|
|
|
|
if (slot->device == device)
|
|
|
|
return slot;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2008-10-23 10:47:32 +08:00
|
|
|
ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
|
2006-12-22 09:01:03 +08:00
|
|
|
return NULL;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
struct hpc_ops {
|
2006-12-22 09:01:07 +08:00
|
|
|
int (*power_on_slot)(struct slot *slot);
|
|
|
|
int (*power_off_slot)(struct slot *slot);
|
|
|
|
int (*get_power_status)(struct slot *slot, u8 *status);
|
|
|
|
int (*get_attention_status)(struct slot *slot, u8 *status);
|
|
|
|
int (*set_attention_status)(struct slot *slot, u8 status);
|
|
|
|
int (*get_latch_status)(struct slot *slot, u8 *status);
|
|
|
|
int (*get_adapter_status)(struct slot *slot, u8 *status);
|
|
|
|
int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
|
|
|
|
int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
|
|
|
|
int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
|
|
|
|
int (*get_cur_lnk_width)(struct slot *slot, enum pcie_link_width *val);
|
|
|
|
int (*query_power_fault)(struct slot *slot);
|
|
|
|
void (*green_led_on)(struct slot *slot);
|
|
|
|
void (*green_led_off)(struct slot *slot);
|
|
|
|
void (*green_led_blink)(struct slot *slot);
|
|
|
|
void (*release_ctlr)(struct controller *ctrl);
|
|
|
|
int (*check_lnk_status)(struct controller *ctrl);
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
2006-03-04 02:16:05 +08:00
|
|
|
#ifdef CONFIG_ACPI
|
2006-08-08 21:44:26 +08:00
|
|
|
#include <acpi/acpi.h>
|
|
|
|
#include <acpi/acpi_bus.h>
|
|
|
|
#include <linux/pci-acpi.h>
|
|
|
|
|
2008-12-17 11:07:38 +08:00
|
|
|
extern void __init pciehp_acpi_slot_detection_init(void);
|
|
|
|
extern int pciehp_acpi_slot_detection_check(struct pci_dev *dev);
|
|
|
|
|
|
|
|
static inline void pciehp_firmware_init(void)
|
|
|
|
{
|
|
|
|
pciehp_acpi_slot_detection_init();
|
|
|
|
}
|
|
|
|
|
2008-05-28 14:01:03 +08:00
|
|
|
static inline int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
|
|
|
|
{
|
2008-12-17 11:07:38 +08:00
|
|
|
int retval;
|
2008-05-28 14:01:03 +08:00
|
|
|
u32 flags = (OSC_PCI_EXPRESS_NATIVE_HP_CONTROL |
|
|
|
|
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
|
2008-12-17 11:07:38 +08:00
|
|
|
retval = acpi_get_hp_hw_control_from_firmware(dev, flags);
|
|
|
|
if (retval)
|
|
|
|
return retval;
|
|
|
|
return pciehp_acpi_slot_detection_check(dev);
|
2008-05-28 14:01:03 +08:00
|
|
|
}
|
|
|
|
|
2006-03-04 02:16:05 +08:00
|
|
|
static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
|
|
|
|
struct hotplug_params *hpp)
|
|
|
|
{
|
2006-05-02 09:54:50 +08:00
|
|
|
if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev->bus, hpp)))
|
2006-03-04 02:16:05 +08:00
|
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#else
|
2008-12-17 11:07:38 +08:00
|
|
|
#define pciehp_firmware_init() do {} while (0)
|
2006-03-04 02:16:05 +08:00
|
|
|
#define pciehp_get_hp_hw_control_from_firmware(dev) 0
|
|
|
|
#define pciehp_get_hp_params_from_firmware(dev, hpp) (-ENODEV)
|
|
|
|
#endif /* CONFIG_ACPI */
|
2005-04-17 06:20:36 +08:00
|
|
|
#endif /* _PCIEHP_H */
|