kernel_optimize_test/tools/perf/perf-completion.sh

290 lines
6.0 KiB
Bash
Raw Normal View History

# perf bash and zsh completion
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
# Taken from git.git's completion script.
__my_reassemble_comp_words_by_ref()
{
local exclude i j first
# Which word separators to exclude?
exclude="${1//[^$COMP_WORDBREAKS]}"
cword_=$COMP_CWORD
if [ -z "$exclude" ]; then
words_=("${COMP_WORDS[@]}")
return
fi
# List of word completion separators has shrunk;
# re-assemble words to complete.
for ((i=0, j=0; i < ${#COMP_WORDS[@]}; i++, j++)); do
# Append each nonempty word consisting of just
# word separator characters to the current word.
first=t
while
[ $i -gt 0 ] &&
[ -n "${COMP_WORDS[$i]}" ] &&
# word consists of excluded word separators
[ "${COMP_WORDS[$i]//[^$exclude]}" = "${COMP_WORDS[$i]}" ]
do
# Attach to the previous token,
# unless the previous token is the command name.
if [ $j -ge 2 ] && [ -n "$first" ]; then
((j--))
fi
first=
words_[$j]=${words_[j]}${COMP_WORDS[i]}
if [ $i = $COMP_CWORD ]; then
cword_=$j
fi
if (($i < ${#COMP_WORDS[@]} - 1)); then
((i++))
else
# Done.
return
fi
done
words_[$j]=${words_[j]}${COMP_WORDS[i]}
if [ $i = $COMP_CWORD ]; then
cword_=$j
fi
done
}
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
# Define preload_get_comp_words_by_ref="false", if the function
# __perf_get_comp_words_by_ref() is required instead.
preload_get_comp_words_by_ref="true"
if [ $preload_get_comp_words_by_ref = "true" ]; then
type _get_comp_words_by_ref &>/dev/null ||
preload_get_comp_words_by_ref="false"
fi
[ $preload_get_comp_words_by_ref = "true" ] ||
__perf_get_comp_words_by_ref()
{
local exclude cur_ words_ cword_
if [ "$1" = "-n" ]; then
exclude=$2
shift 2
fi
__my_reassemble_comp_words_by_ref "$exclude"
cur_=${words_[cword_]}
while [ $# -gt 0 ]; do
case "$1" in
cur)
cur=$cur_
;;
prev)
prev=${words_[$cword_-1]}
;;
words)
words=("${words_[@]}")
;;
cword)
cword=$cword_
;;
esac
shift
done
}
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
# Define preload__ltrim_colon_completions="false", if the function
# __perf__ltrim_colon_completions() is required instead.
preload__ltrim_colon_completions="true"
if [ $preload__ltrim_colon_completions = "true" ]; then
type __ltrim_colon_completions &>/dev/null ||
preload__ltrim_colon_completions="false"
fi
[ $preload__ltrim_colon_completions = "true" ] ||
__perf__ltrim_colon_completions()
{
if [[ "$1" == *:* && "$COMP_WORDBREAKS" == *:* ]]; then
# Remove colon-word prefix from COMPREPLY items
local colon_word=${1%"${1##*:}"}
local i=${#COMPREPLY[*]}
while [[ $((--i)) -ge 0 ]]; do
COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
done
fi
}
__perfcomp ()
{
COMPREPLY=( $( compgen -W "$1" -- "$2" ) )
}
__perfcomp_colon ()
{
__perfcomp "$1" "$2"
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
if [ $preload__ltrim_colon_completions = "true" ]; then
__ltrim_colon_completions $cur
else
__perf__ltrim_colon_completions $cur
fi
}
__perf_prev_skip_opts ()
{
local i cmd_ cmds_
let i=cword-1
perf tools: Provide the right bash completion for listing options of perf subcommand subsubcommand The bash completion gives wrong options for 'perf kvm|kmem|mem|lock| sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem |lock|sched'. In fact, the result incorrectly lists the bash completion of 'perf subcommand' rather than 'perf subcommand subsubcommand'. Example: Before this patch: $ perf kvm record --<TAB> --guest --guestkallsyms --guestmodules --guestmount --guestvmlinux --host --input --output --verbose As shown above, the result is the options of kvm rather than record. After this patch: $ perf kvm record --<TAB> --all-cpus --cgroup --delay --group --no-buildid --output --quiet --stat --uid --branch-any --count --event --intr-regs --no-buildid-cache --period --raw-samples --tid --verbose --branch-filter --cpu --filter --mmap-pages --no-inherit --per-thread --realtime --timestamp --weight --call-graph --data --freq --no-buffering --no-samples --pid --running-time --transaction As shown above, the result is exactly the options of record as we wished. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:48 +08:00
cmds_=$($cmd $1 --list-cmds)
prev_skip_opts=()
while [ $i -ge 0 ]; do
perf tools: Provide the right bash completion for listing options of perf subcommand subsubcommand The bash completion gives wrong options for 'perf kvm|kmem|mem|lock| sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem |lock|sched'. In fact, the result incorrectly lists the bash completion of 'perf subcommand' rather than 'perf subcommand subsubcommand'. Example: Before this patch: $ perf kvm record --<TAB> --guest --guestkallsyms --guestmodules --guestmount --guestvmlinux --host --input --output --verbose As shown above, the result is the options of kvm rather than record. After this patch: $ perf kvm record --<TAB> --all-cpus --cgroup --delay --group --no-buildid --output --quiet --stat --uid --branch-any --count --event --intr-regs --no-buildid-cache --period --raw-samples --tid --verbose --branch-filter --cpu --filter --mmap-pages --no-inherit --per-thread --realtime --timestamp --weight --call-graph --data --freq --no-buffering --no-samples --pid --running-time --transaction As shown above, the result is exactly the options of record as we wished. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:48 +08:00
if [[ ${words[i]} == $1 ]]; then
return
fi
for cmd_ in $cmds_; do
if [[ ${words[i]} == $cmd_ ]]; then
prev_skip_opts=${words[i]}
return
fi
done
((i--))
done
}
__perf_main ()
{
local cmd
cmd=${words[0]}
COMPREPLY=()
# Skip options backward and find the last perf command
__perf_prev_skip_opts
# List perf subcommands or long options
if [ -z $prev_skip_opts ]; then
if [[ $cur == --* ]]; then
perf tools: Fix the bash completion problem of 'perf --*' The perf-completion.sh uses a predefined string '--help --version --exec-path --html-path --paginate --no-pager --perf-dir --work-tree --debugfs-dir' for the bash completion of 'perf --*', which has two problems: Problem 1: If the options of perf are changed (see handle_options() in perf.c), the perf-completion.sh has to be changed at the same time. If not, the bash completion of 'perf --*' and the options which perf really supports will be inconsistent. Problem 2: When typing another single character after 'perf --', e.g. 'h', and hit TAB key to get the bash completion of 'perf --h', the character 'h' disappears at once. This is not what we want, we wish the bash completion can return '--help --html-path' and then we can continue to choose one. To solve this problem, we add '--list-opts' to perf, which now supports 'perf --list-opts' directly, and its result can be used in bash completion now. Example: Before this patch: $ perf --h <-- hit TAB key after character 'h' $ perf -- <-- 'h' disappears and no required result After this patch: $ perf --h <-- hit TAB key after character 'h' --help --html-path <-- the required result Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 18:21:31 +08:00
cmds=$($cmd --list-opts)
else
cmds=$($cmd --list-cmds)
fi
perf tools: Fix the bash completion problem of 'perf --*' The perf-completion.sh uses a predefined string '--help --version --exec-path --html-path --paginate --no-pager --perf-dir --work-tree --debugfs-dir' for the bash completion of 'perf --*', which has two problems: Problem 1: If the options of perf are changed (see handle_options() in perf.c), the perf-completion.sh has to be changed at the same time. If not, the bash completion of 'perf --*' and the options which perf really supports will be inconsistent. Problem 2: When typing another single character after 'perf --', e.g. 'h', and hit TAB key to get the bash completion of 'perf --h', the character 'h' disappears at once. This is not what we want, we wish the bash completion can return '--help --html-path' and then we can continue to choose one. To solve this problem, we add '--list-opts' to perf, which now supports 'perf --list-opts' directly, and its result can be used in bash completion now. Example: Before this patch: $ perf --h <-- hit TAB key after character 'h' $ perf -- <-- 'h' disappears and no required result After this patch: $ perf --h <-- hit TAB key after character 'h' --help --html-path <-- the required result Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-27 18:21:31 +08:00
__perfcomp "$cmds" "$cur"
# List possible events for -e option
elif [[ $prev == @("-e"|"--event") &&
$prev_skip_opts == @(record|stat|top) ]]; then
perf tool: Improve bash command line auto-complete for multiple events with comma perf has perf-completion.sh to define command line auto-completion in bash/zsh. For record/stat -e it works for single events, but isn't working when specifying multiple events with comma. It would be very useful if it could be fixed to make it easier by supporting multiple events, comma separated. With this patch, the result can be like this: 1. Support the events returned from 'perf list --raw-dump' root@skl:/tmp# perf stat -e cpu/cache<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB> cpu/branch-instructions/ cpu/branch-misses/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB> root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/ 2. Support the events listed in /sys/bus/event_source/devices/cpu/events root@skl:/tmp# perf stat -e cycle<TAB> cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any cycle_activity.cycles_l3_miss cycle_activity.stalls_total cycle_activity.cycles_mem_any cycles-ct cycle_activity.stalls_l1d_miss cycles-t cycle_activity.stalls_l2_miss root@skl:/tmp# perf stat -e cycles-<TAB> cycles-ct cycles-t root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/ 3. Support the uppercase event which is with prefix "cpu/" root@skl:/tmp# perf stat -e cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB> cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/ cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/ Note that: a) This patch only supports bash. b) It doesn't support the cases like {},{} or {...,...}. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-21 17:26:10 +08:00
local cur1=${COMP_WORDS[COMP_CWORD]}
local raw_evts=$($cmd list --raw-dump)
local arr s tmp result
if [[ "$cur1" == */* && ${cur1#*/} =~ ^[A-Z] ]]; then
OLD_IFS="$IFS"
IFS=" "
arr=($raw_evts)
IFS="$OLD_IFS"
for s in ${arr[@]}
do
if [[ "$s" == *cpu/* ]]; then
tmp=${s#*cpu/}
result=$result" ""cpu/"${tmp^^}
else
result=$result" "$s
fi
done
evts=${result}+$(ls /sys/bus/event_source/devices/cpu/events)
else
evts=${raw_evts}+$(ls /sys/bus/event_source/devices/cpu/events)
fi
__perfcomp_colon "$evts" "$cur1"
else
# List subcommands for perf commands
if [[ $prev_skip_opts == @(kvm|kmem|mem|lock|sched|
|data|help|script|test|timechart|trace) ]]; then
subcmds=$($cmd $prev_skip_opts --list-cmds)
__perfcomp_colon "$subcmds" "$cur"
fi
# List long option names
if [[ $cur == --* ]]; then
perf tools: Provide the right bash completion for listing options of perf subcommand subsubcommand The bash completion gives wrong options for 'perf kvm|kmem|mem|lock| sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem |lock|sched'. In fact, the result incorrectly lists the bash completion of 'perf subcommand' rather than 'perf subcommand subsubcommand'. Example: Before this patch: $ perf kvm record --<TAB> --guest --guestkallsyms --guestmodules --guestmount --guestvmlinux --host --input --output --verbose As shown above, the result is the options of kvm rather than record. After this patch: $ perf kvm record --<TAB> --all-cpus --cgroup --delay --group --no-buildid --output --quiet --stat --uid --branch-any --count --event --intr-regs --no-buildid-cache --period --raw-samples --tid --verbose --branch-filter --cpu --filter --mmap-pages --no-inherit --per-thread --realtime --timestamp --weight --call-graph --data --freq --no-buffering --no-samples --pid --running-time --transaction As shown above, the result is exactly the options of record as we wished. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:48 +08:00
subcmd=$prev_skip_opts
__perf_prev_skip_opts $subcmd
subcmd=$subcmd" "$prev_skip_opts
opts=$($cmd $subcmd --list-opts)
__perfcomp "$opts" "$cur"
fi
fi
}
if [[ -n ${ZSH_VERSION-} ]]; then
autoload -U +X compinit && compinit
__perfcomp ()
{
emulate -L zsh
local c IFS=$' \t\n'
local -a array
for c in ${=1}; do
case $c in
--*=*|*.) ;;
*) c="$c " ;;
esac
array[${#array[@]}+1]="$c"
done
compset -P '*[=:]'
compadd -Q -S '' -a -- array && _ret=0
}
__perfcomp_colon ()
{
emulate -L zsh
local cur_="${2-$cur}"
local c IFS=$' \t\n'
local -a array
if [[ "$cur_" == *:* ]]; then
local colon_word=${cur_%"${cur_##*:}"}
fi
for c in ${=1}; do
case $c in
--*=*|*.) ;;
*) c="$c " ;;
esac
array[$#array+1]=${c#"$colon_word"}
done
compset -P '*[=:]'
compadd -Q -S '' -a -- array && _ret=0
}
_perf ()
{
local _ret=1 cur cword prev
cur=${words[CURRENT]}
prev=${words[CURRENT-1]}
let cword=CURRENT-1
emulate ksh -c __perf_main
let _ret && _default && _ret=0
return _ret
}
compdef _perf perf
return
fi
type perf &>/dev/null &&
_perf()
{
perf tool: Improve bash command line auto-complete for multiple events with comma perf has perf-completion.sh to define command line auto-completion in bash/zsh. For record/stat -e it works for single events, but isn't working when specifying multiple events with comma. It would be very useful if it could be fixed to make it easier by supporting multiple events, comma separated. With this patch, the result can be like this: 1. Support the events returned from 'perf list --raw-dump' root@skl:/tmp# perf stat -e cpu/cache<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB> cpu/branch-instructions/ cpu/branch-misses/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB> root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/ 2. Support the events listed in /sys/bus/event_source/devices/cpu/events root@skl:/tmp# perf stat -e cycle<TAB> cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any cycle_activity.cycles_l3_miss cycle_activity.stalls_total cycle_activity.cycles_mem_any cycles-ct cycle_activity.stalls_l1d_miss cycles-t cycle_activity.stalls_l2_miss root@skl:/tmp# perf stat -e cycles-<TAB> cycles-ct cycles-t root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/ 3. Support the uppercase event which is with prefix "cpu/" root@skl:/tmp# perf stat -e cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB> cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/ cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/ Note that: a) This patch only supports bash. b) It doesn't support the cases like {},{} or {...,...}. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-21 17:26:10 +08:00
if [[ "$COMP_WORDBREAKS" != *,* ]]; then
COMP_WORDBREAKS="${COMP_WORDBREAKS},"
export COMP_WORDBREAKS
fi
local cur words cword prev
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
if [ $preload_get_comp_words_by_ref = "true" ]; then
perf tool: Improve bash command line auto-complete for multiple events with comma perf has perf-completion.sh to define command line auto-completion in bash/zsh. For record/stat -e it works for single events, but isn't working when specifying multiple events with comma. It would be very useful if it could be fixed to make it easier by supporting multiple events, comma separated. With this patch, the result can be like this: 1. Support the events returned from 'perf list --raw-dump' root@skl:/tmp# perf stat -e cpu/cache<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB> cpu/branch-instructions/ cpu/branch-misses/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB> root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/ 2. Support the events listed in /sys/bus/event_source/devices/cpu/events root@skl:/tmp# perf stat -e cycle<TAB> cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any cycle_activity.cycles_l3_miss cycle_activity.stalls_total cycle_activity.cycles_mem_any cycles-ct cycle_activity.stalls_l1d_miss cycles-t cycle_activity.stalls_l2_miss root@skl:/tmp# perf stat -e cycles-<TAB> cycles-ct cycles-t root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/ 3. Support the uppercase event which is with prefix "cpu/" root@skl:/tmp# perf stat -e cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB> cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/ cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/ Note that: a) This patch only supports bash. b) It doesn't support the cases like {},{} or {...,...}. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-21 17:26:10 +08:00
_get_comp_words_by_ref -n =:, cur words cword prev
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
else
perf tool: Improve bash command line auto-complete for multiple events with comma perf has perf-completion.sh to define command line auto-completion in bash/zsh. For record/stat -e it works for single events, but isn't working when specifying multiple events with comma. It would be very useful if it could be fixed to make it easier by supporting multiple events, comma separated. With this patch, the result can be like this: 1. Support the events returned from 'perf list --raw-dump' root@skl:/tmp# perf stat -e cpu/cache<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB> cpu/branch-instructions/ cpu/branch-misses/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB> root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/ 2. Support the events listed in /sys/bus/event_source/devices/cpu/events root@skl:/tmp# perf stat -e cycle<TAB> cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any cycle_activity.cycles_l3_miss cycle_activity.stalls_total cycle_activity.cycles_mem_any cycles-ct cycle_activity.stalls_l1d_miss cycles-t cycle_activity.stalls_l2_miss root@skl:/tmp# perf stat -e cycles-<TAB> cycles-ct cycles-t root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB> cpu/cache-misses/ cpu/cache-references/ root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/ 3. Support the uppercase event which is with prefix "cpu/" root@skl:/tmp# perf stat -e cpu/c<TAB> cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/ cpu/cache-references/ cpu/cycles-ct/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB> cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/ cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/ root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/ Note that: a) This patch only supports bash. b) It doesn't support the cases like {},{} or {...,...}. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-12-21 17:26:10 +08:00
__perf_get_comp_words_by_ref -n =:, cur words cword prev
perf tools: Avoid confusion with preloaded bash function for perf bash completion Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-03-18 21:35:58 +08:00
fi
__perf_main
} &&
complete -o bashdefault -o default -o nospace -F _perf perf 2>/dev/null \
|| complete -o default -o nospace -F _perf perf