kernel_optimize_test/include/linux/backing-dev.h

223 lines
6.1 KiB
C
Raw Normal View History

/*
* include/linux/backing-dev.h
*
* low-level device information and state which is propagated up through
* to high-level code.
*/
#ifndef _LINUX_BACKING_DEV_H
#define _LINUX_BACKING_DEV_H
#include <linux/percpu_counter.h>
#include <linux/log2.h>
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:25:50 +08:00
#include <linux/proportions.h>
#include <linux/kernel.h>
#include <asm/atomic.h>
struct page;
struct device;
struct dentry;
/*
* Bits in backing_dev_info.state
*/
enum bdi_state {
BDI_pdflush, /* A pdflush thread is working this device */
BDI_write_congested, /* The write queue is getting full */
BDI_read_congested, /* The read queue is getting full */
BDI_unused, /* Available bits start here */
};
typedef int (congested_fn)(void *, int);
enum bdi_stat_item {
BDI_RECLAIMABLE,
BDI_WRITEBACK,
NR_BDI_STAT_ITEMS
};
#define BDI_STAT_BATCH (8*(1+ilog2(nr_cpu_ids)))
struct backing_dev_info {
unsigned long ra_pages; /* max readahead in PAGE_CACHE_SIZE units */
unsigned long state; /* Always use atomic bitops on this */
unsigned int capabilities; /* Device capabilities */
congested_fn *congested_fn; /* Function pointer if device is md/dm */
void *congested_data; /* Pointer to aux data for congested func */
void (*unplug_io_fn)(struct backing_dev_info *, struct page *);
void *unplug_io_data;
struct percpu_counter bdi_stat[NR_BDI_STAT_ITEMS];
mm: per device dirty threshold Scale writeback cache per backing device, proportional to its writeout speed. By decoupling the BDI dirty thresholds a number of problems we currently have will go away, namely: - mutual interference starvation (for any number of BDIs); - deadlocks with stacked BDIs (loop, FUSE and local NFS mounts). It might be that all dirty pages are for a single BDI while other BDIs are idling. By giving each BDI a 'fair' share of the dirty limit, each one can have dirty pages outstanding and make progress. A global threshold also creates a deadlock for stacked BDIs; when A writes to B, and A generates enough dirty pages to get throttled, B will never start writeback until the dirty pages go away. Again, by giving each BDI its own 'independent' dirty limit, this problem is avoided. So the problem is to determine how to distribute the total dirty limit across the BDIs fairly and efficiently. A DBI that has a large dirty limit but does not have any dirty pages outstanding is a waste. What is done is to keep a floating proportion between the DBIs based on writeback completions. This way faster/more active devices get a larger share than slower/idle devices. [akpm@linux-foundation.org: fix warnings] [hugh@veritas.com: Fix occasional hang when a task couldn't get out of balance_dirty_pages] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 14:25:50 +08:00
struct prop_local_percpu completions;
int dirty_exceeded;
unsigned int min_ratio;
unsigned int max_ratio, max_prop_frac;
struct device *dev;
#ifdef CONFIG_DEBUG_FS
struct dentry *debug_dir;
struct dentry *debug_stats;
#endif
};
int bdi_init(struct backing_dev_info *bdi);
void bdi_destroy(struct backing_dev_info *bdi);
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
static inline void __add_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item, s64 amount)
{
__percpu_counter_add(&bdi->bdi_stat[item], amount, BDI_STAT_BATCH);
}
static inline void __inc_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
__add_bdi_stat(bdi, item, 1);
}
static inline void inc_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
unsigned long flags;
local_irq_save(flags);
__inc_bdi_stat(bdi, item);
local_irq_restore(flags);
}
static inline void __dec_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
__add_bdi_stat(bdi, item, -1);
}
static inline void dec_bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
unsigned long flags;
local_irq_save(flags);
__dec_bdi_stat(bdi, item);
local_irq_restore(flags);
}
static inline s64 bdi_stat(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
return percpu_counter_read_positive(&bdi->bdi_stat[item]);
}
static inline s64 __bdi_stat_sum(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
return percpu_counter_sum_positive(&bdi->bdi_stat[item]);
}
static inline s64 bdi_stat_sum(struct backing_dev_info *bdi,
enum bdi_stat_item item)
{
s64 sum;
unsigned long flags;
local_irq_save(flags);
sum = __bdi_stat_sum(bdi, item);
local_irq_restore(flags);
return sum;
}
/*
* maximal error of a stat counter.
*/
static inline unsigned long bdi_stat_error(struct backing_dev_info *bdi)
{
#ifdef CONFIG_SMP
return nr_cpu_ids * BDI_STAT_BATCH;
#else
return 1;
#endif
}
int bdi_set_min_ratio(struct backing_dev_info *bdi, unsigned int min_ratio);
int bdi_set_max_ratio(struct backing_dev_info *bdi, unsigned int max_ratio);
/*
* Flags in backing_dev_info::capability
* - The first two flags control whether dirty pages will contribute to the
* VM's accounting and whether writepages() should be called for dirty pages
* (something that would not, for example, be appropriate for ramfs)
* - These flags let !MMU mmap() govern direct device mapping vs immediate
* copying more easily for MAP_PRIVATE, especially for ROM filesystems
*/
#define BDI_CAP_NO_ACCT_DIRTY 0x00000001 /* Dirty pages shouldn't contribute to accounting */
#define BDI_CAP_NO_WRITEBACK 0x00000002 /* Don't write pages back */
#define BDI_CAP_MAP_COPY 0x00000004 /* Copy can be mapped (MAP_PRIVATE) */
#define BDI_CAP_MAP_DIRECT 0x00000008 /* Can be mapped directly (MAP_SHARED) */
#define BDI_CAP_READ_MAP 0x00000010 /* Can be mapped for reading */
#define BDI_CAP_WRITE_MAP 0x00000020 /* Can be mapped for writing */
#define BDI_CAP_EXEC_MAP 0x00000040 /* Can be mapped for execution */
#define BDI_CAP_VMFLAGS \
(BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP)
#if defined(VM_MAYREAD) && \
(BDI_CAP_READ_MAP != VM_MAYREAD || \
BDI_CAP_WRITE_MAP != VM_MAYWRITE || \
BDI_CAP_EXEC_MAP != VM_MAYEXEC)
#error please change backing_dev_info::capabilities flags
#endif
extern struct backing_dev_info default_backing_dev_info;
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page);
int writeback_in_progress(struct backing_dev_info *bdi);
static inline int bdi_congested(struct backing_dev_info *bdi, int bdi_bits)
{
if (bdi->congested_fn)
return bdi->congested_fn(bdi->congested_data, bdi_bits);
return (bdi->state & bdi_bits);
}
static inline int bdi_read_congested(struct backing_dev_info *bdi)
{
return bdi_congested(bdi, 1 << BDI_read_congested);
}
static inline int bdi_write_congested(struct backing_dev_info *bdi)
{
return bdi_congested(bdi, 1 << BDI_write_congested);
}
static inline int bdi_rw_congested(struct backing_dev_info *bdi)
{
return bdi_congested(bdi, (1 << BDI_read_congested)|
(1 << BDI_write_congested));
}
void clear_bdi_congested(struct backing_dev_info *bdi, int rw);
void set_bdi_congested(struct backing_dev_info *bdi, int rw);
long congestion_wait(int rw, long timeout);
#define bdi_cap_writeback_dirty(bdi) \
(!((bdi)->capabilities & BDI_CAP_NO_WRITEBACK))
#define bdi_cap_account_dirty(bdi) \
(!((bdi)->capabilities & BDI_CAP_NO_ACCT_DIRTY))
#define mapping_cap_writeback_dirty(mapping) \
bdi_cap_writeback_dirty((mapping)->backing_dev_info)
#define mapping_cap_account_dirty(mapping) \
bdi_cap_account_dirty((mapping)->backing_dev_info)
#endif /* _LINUX_BACKING_DEV_H */