kernel_optimize_test/drivers/pnp/system.c

113 lines
2.7 KiB
C
Raw Normal View History

/*
* system.c - a driver for reserving pnp system resources
*
* Some code is based on pnpbios_core.c
* Copyright 2002 Adam Belay <ambx1@neo.rr.com>
* (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*/
#include <linux/pnp.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
static const struct pnp_device_id pnp_dev_table[] = {
/* General ID for reserving resources */
{"PNP0c02", 0},
/* memory controller */
{"PNP0c01", 0},
{"", 0}
};
static void reserve_range(struct pnp_dev *dev, struct resource *r, int port)
{
char *regionid;
const char *pnpid = dev_name(&dev->dev);
resource_size_t start = r->start, end = r->end;
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-04 09:09:03 +08:00
struct resource *res;
regionid = kmalloc(16, GFP_KERNEL);
if (!regionid)
return;
snprintf(regionid, 16, "pnp %s", pnpid);
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-04 09:09:03 +08:00
if (port)
res = request_region(start, end - start + 1, regionid);
else
res = request_mem_region(start, end - start + 1, regionid);
if (res)
res->flags &= ~IORESOURCE_BUSY;
else
kfree(regionid);
/*
* Failures at this point are usually harmless. pci quirks for
* example do reserve stuff they know about too, so we may well
* have double reservations.
*/
dev_info(&dev->dev, "%pR %s reserved\n", r,
ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-07-04 09:09:03 +08:00
res ? "has been" : "could not be");
}
static void reserve_resources_of_dev(struct pnp_dev *dev)
{
struct resource *res;
int i;
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IO, i)); i++) {
PNP: replace pnp_resource_table with dynamically allocated resources PNP used to have a fixed-size pnp_resource_table for tracking the resources used by a device. This table often overflowed, so we've had to increase the table size, which wastes memory because most devices have very few resources. This patch replaces the table with a linked list of resources where the entries are allocated on demand. This removes messages like these: pnpacpi: exceeded the max number of IO resources 00:01: too many I/O port resources References: http://bugzilla.kernel.org/show_bug.cgi?id=9535 http://bugzilla.kernel.org/show_bug.cgi?id=9740 http://lkml.org/lkml/2007/11/30/110 This patch also changes the way PNP uses the IORESOURCE_UNSET, IORESOURCE_AUTO, and IORESOURCE_DISABLED flags. Prior to this patch, the pnp_resource_table entries used the flags like this: IORESOURCE_UNSET This table entry is unused and available for use. When this flag is set, we shouldn't look at anything else in the resource structure. This flag is set when a resource table entry is initialized. IORESOURCE_AUTO This resource was assigned automatically by pnp_assign_{io,mem,etc}(). This flag is set when a resource table entry is initialized and cleared whenever we discover a resource setting by reading an ISAPNP config register, parsing a PNPBIOS resource data stream, parsing an ACPI _CRS list, or interpreting a sysfs "set" command. Resources marked IORESOURCE_AUTO are reinitialized and marked as IORESOURCE_UNSET by pnp_clean_resource_table() in these cases: - before we attempt to assign resources automatically, - if we fail to assign resources automatically, - after disabling a device IORESOURCE_DISABLED Set by pnp_assign_{io,mem,etc}() when automatic assignment fails. Also set by PNPBIOS and PNPACPI for: - invalid IRQs or GSI registration failures - invalid DMA channels - I/O ports above 0x10000 - mem ranges with negative length After this patch, there is no pnp_resource_table, and the resource list entries use the flags like this: IORESOURCE_UNSET This flag is no longer used in PNP. Instead of keeping IORESOURCE_UNSET entries in the resource list, we remove entries from the list and free them. IORESOURCE_AUTO No change in meaning: it still means the resource was assigned automatically by pnp_assign_{port,mem,etc}(), but these functions now set the bit explicitly. We still "clean" a device's resource list in the same places, but rather than reinitializing IORESOURCE_AUTO entries, we just remove them from the list. Note that IORESOURCE_AUTO entries are always at the end of the list, so removing them doesn't reorder other list entries. This is because non-IORESOURCE_AUTO entries are added by the ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the sysfs "set" command. In each of these cases, we completely free the resource list first. IORESOURCE_DISABLED In addition to the cases where we used to set this flag, ISAPNP now adds an IORESOURCE_DISABLED resource when it reads a configuration register with a "disabled" value. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-28 06:56:57 +08:00
if (res->flags & IORESOURCE_DISABLED)
continue;
if (res->start == 0)
continue; /* disabled */
if (res->start < 0x100)
/*
* Below 0x100 is only standard PC hardware
* (pics, kbd, timer, dma, ...)
* We should not get resource conflicts there,
* and the kernel reserves these anyway
* (see arch/i386/kernel/setup.c).
* So, do nothing
*/
continue;
if (res->end < res->start)
continue; /* invalid */
reserve_range(dev, res, 1);
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
PNP: replace pnp_resource_table with dynamically allocated resources PNP used to have a fixed-size pnp_resource_table for tracking the resources used by a device. This table often overflowed, so we've had to increase the table size, which wastes memory because most devices have very few resources. This patch replaces the table with a linked list of resources where the entries are allocated on demand. This removes messages like these: pnpacpi: exceeded the max number of IO resources 00:01: too many I/O port resources References: http://bugzilla.kernel.org/show_bug.cgi?id=9535 http://bugzilla.kernel.org/show_bug.cgi?id=9740 http://lkml.org/lkml/2007/11/30/110 This patch also changes the way PNP uses the IORESOURCE_UNSET, IORESOURCE_AUTO, and IORESOURCE_DISABLED flags. Prior to this patch, the pnp_resource_table entries used the flags like this: IORESOURCE_UNSET This table entry is unused and available for use. When this flag is set, we shouldn't look at anything else in the resource structure. This flag is set when a resource table entry is initialized. IORESOURCE_AUTO This resource was assigned automatically by pnp_assign_{io,mem,etc}(). This flag is set when a resource table entry is initialized and cleared whenever we discover a resource setting by reading an ISAPNP config register, parsing a PNPBIOS resource data stream, parsing an ACPI _CRS list, or interpreting a sysfs "set" command. Resources marked IORESOURCE_AUTO are reinitialized and marked as IORESOURCE_UNSET by pnp_clean_resource_table() in these cases: - before we attempt to assign resources automatically, - if we fail to assign resources automatically, - after disabling a device IORESOURCE_DISABLED Set by pnp_assign_{io,mem,etc}() when automatic assignment fails. Also set by PNPBIOS and PNPACPI for: - invalid IRQs or GSI registration failures - invalid DMA channels - I/O ports above 0x10000 - mem ranges with negative length After this patch, there is no pnp_resource_table, and the resource list entries use the flags like this: IORESOURCE_UNSET This flag is no longer used in PNP. Instead of keeping IORESOURCE_UNSET entries in the resource list, we remove entries from the list and free them. IORESOURCE_AUTO No change in meaning: it still means the resource was assigned automatically by pnp_assign_{port,mem,etc}(), but these functions now set the bit explicitly. We still "clean" a device's resource list in the same places, but rather than reinitializing IORESOURCE_AUTO entries, we just remove them from the list. Note that IORESOURCE_AUTO entries are always at the end of the list, so removing them doesn't reorder other list entries. This is because non-IORESOURCE_AUTO entries are added by the ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the sysfs "set" command. In each of these cases, we completely free the resource list first. IORESOURCE_DISABLED In addition to the cases where we used to set this flag, ISAPNP now adds an IORESOURCE_DISABLED resource when it reads a configuration register with a "disabled" value. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-28 06:56:57 +08:00
if (res->flags & IORESOURCE_DISABLED)
continue;
reserve_range(dev, res, 0);
}
}
static int system_pnp_probe(struct pnp_dev *dev,
const struct pnp_device_id *dev_id)
{
reserve_resources_of_dev(dev);
return 0;
}
static struct pnp_driver system_pnp_driver = {
.name = "system",
.id_table = pnp_dev_table,
.flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
.probe = system_pnp_probe,
};
static int __init pnp_system_init(void)
{
return pnp_register_driver(&system_pnp_driver);
}
/**
* Reserve motherboard resources after PCI claim BARs,
* but before PCI assign resources for uninitialized PCI devices
*/
fs_initcall(pnp_system_init);