AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
84532c9120
kernel_optimize_test/arch/powerpc/kernel/ppc_ksyms.c

216 lines
5.2 KiB
C
Raw Normal View History

powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#include <linux/module.h>
#include <linux/threads.h>
#include <linux/smp.h>
#include <linux/sched.h>
#include <linux/elfcore.h>
#include <linux/string.h>
#include <linux/interrupt.h>
[PATCH] tty: Remove include of screen_info.h from tty.h screen_info.h doesn't have anything to do with the tty layer and shouldn't be included by tty.h. This patches removes the include and modifies all users to directly include screen_info.h. struct screen_info is mainly used to communicate with the console drivers in drivers/video/console. Note that this patch touches every arch and I have no way of testing it. If there is a mistake the worst thing that will happen is a compile error. [akpm@osdl.org: fix arm build] [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 19:44:13 +08:00
#include <linux/screen_info.h>
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#include <linux/vt_kern.h>
#include <linux/nvram.h>
#include <linux/console.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/bitops.h>
#include <asm/page.h>
#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/ide.h>
#include <asm/atomic.h>
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <asm/pmac_feature.h>
#include <asm/dma.h>
#include <asm/machdep.h>
#include <asm/hw_irq.h>
#include <asm/nvram.h>
#include <asm/mmu_context.h>
#include <asm/backlight.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/btext.h>
#include <asm/div64.h>
[PATCH] powerpc: Merge signal.h Having already merged the ppc and ppc64 versions of signal.c, this patch finishes the job by merging signal.h. The two versions were almost identical already. Notable changes: - We use BITS_PER_LONG to correctly size sigset_t - Remove some uneeded #includes and struct forward declarations. This does mean adding an include to signal_32.c which relied on the indirect inclusion of sigcontext.h - As the ppc64 version, the merged signal.h has prototypes for do_signal() and do_signal32(). Thus remove extra prototypes from ppc_ksyms.c which had them directly. Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 08:21:07 +08:00
#include <asm/signal.h>
[POWERPC] Compile fixes for arch/powerpc dcr code The new dcr code does not currently compile when configured for native DCR access on ARCH=powerpc. This patch fixes the problems. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-06 08:48:28 +08:00
#include <asm/dcr.h>
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#ifdef CONFIG_8xx
#include <asm/commproc.h>
#endif
[POWERPC] Lazy interrupt disabling for 64-bit machines This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-04 14:47:49 +08:00
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(local_irq_restore);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
extern void transfer_to_handler(void);
extern void do_IRQ(struct pt_regs *regs);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 16:43:42 +08:00
extern void machine_check_exception(struct pt_regs *regs);
extern void alignment_exception(struct pt_regs *regs);
extern void program_check_exception(struct pt_regs *regs);
extern void single_step_exception(struct pt_regs *regs);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
extern int sys_sigreturn(struct pt_regs *regs);
EXPORT_SYMBOL(clear_pages);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(DMA_MODE_READ);
EXPORT_SYMBOL(DMA_MODE_WRITE);
EXPORT_SYMBOL(__div64_32);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(do_signal);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
powerpc: merge idle_power4.S and trapc.s Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 16:43:42 +08:00
EXPORT_SYMBOL(machine_check_exception);
EXPORT_SYMBOL(alignment_exception);
EXPORT_SYMBOL(program_check_exception);
EXPORT_SYMBOL(single_step_exception);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(sys_sigreturn);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strncpy);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strcasecmp);
powerpc/ppc: export strncasecmp We have a strncasecmp so we might as well export it Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-03 05:01:58 +08:00
EXPORT_SYMBOL(strncasecmp);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(ip_fast_csum);
EXPORT_SYMBOL(csum_tcpudp_magic);
EXPORT_SYMBOL(__copy_tofrom_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
[POWERPC] Export copy_4K_page() Export copy_4K_page() for use by modules via copy_page() (such as CacheFiles). Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-12 23:04:25 +08:00
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(copy_4K_page);
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#if defined(CONFIG_PPC32) && (defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE))
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(ppc_ide_md);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#if defined(CONFIG_PCI) && defined(CONFIG_PPC32)
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
EXPORT_SYMBOL(pci_alloc_consistent);
EXPORT_SYMBOL(pci_free_consistent);
EXPORT_SYMBOL(pci_bus_io_base);
EXPORT_SYMBOL(pci_bus_io_base_phys);
EXPORT_SYMBOL(pci_bus_mem_base_phys);
EXPORT_SYMBOL(pci_bus_to_hose);
#endif /* CONFIG_PCI */
EXPORT_SYMBOL(start_thread);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(giveup_fpu);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_ALTIVEC
EXPORT_SYMBOL(giveup_altivec);
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
EXPORT_SYMBOL(giveup_spe);
#endif /* CONFIG_SPE */
powerpc: Export __flush_icache_range for 32-bit Both 32-bit and 64-bit use the same inline flush_icache_range definition now, so both need to export __flush_icache_range, not just 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-29 12:50:58 +08:00
#ifndef CONFIG_PPC64
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
EXPORT_SYMBOL(flush_instruction_cache);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(flush_tlb_kernel_range);
EXPORT_SYMBOL(flush_tlb_page);
EXPORT_SYMBOL(_tlbie);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif
powerpc: Export __flush_icache_range for 32-bit Both 32-bit and 64-bit use the same inline flush_icache_range definition now, so both need to export __flush_icache_range, not just 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-29 12:50:58 +08:00
EXPORT_SYMBOL(__flush_icache_range);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
EXPORT_SYMBOL(flush_dcache_range);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#ifdef CONFIG_SMP
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(smp_hw_index);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#ifdef CONFIG_ADB
EXPORT_SYMBOL(adb_request);
EXPORT_SYMBOL(adb_register);
EXPORT_SYMBOL(adb_unregister);
EXPORT_SYMBOL(adb_poll);
EXPORT_SYMBOL(adb_try_handler_change);
#endif /* CONFIG_ADB */
#ifdef CONFIG_ADB_CUDA
EXPORT_SYMBOL(cuda_request);
EXPORT_SYMBOL(cuda_poll);
#endif /* CONFIG_ADB_CUDA */
#ifdef CONFIG_VT
EXPORT_SYMBOL(kd_mksound);
#endif
EXPORT_SYMBOL(to_tm);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_PPC32
long long __ashrdi3(long long, int);
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(memchr);
#if defined(CONFIG_FB_VGA16_MODULE)
EXPORT_SYMBOL(screen_info);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(timer_interrupt);
EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(console_drivers);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
EXPORT_SYMBOL(cacheable_memcpy);
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
#endif
#ifdef CONFIG_8xx
EXPORT_SYMBOL(cpm_install_handler);
EXPORT_SYMBOL(cpm_free_handler);
#endif /* CONFIG_8xx */
[PATCH] powerpc: Add MPC834x SYS board to arch/powerpc Add the first MPC83xx board that uses a flat device tree to arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 01:19:58 +08:00
#if defined(CONFIG_8xx) || defined(CONFIG_40x)
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(__res);
#endif
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#ifdef CONFIG_PPC32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(next_mmu_context);
EXPORT_SYMBOL(set_context);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif
#ifdef CONFIG_PPC_STD_MMU_32
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
extern long mol_trampoline;
EXPORT_SYMBOL(mol_trampoline); /* For MOL */
EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
#ifdef CONFIG_SMP
extern int mmu_hash_lock;
EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
#endif /* CONFIG_SMP */
extern long *intercept_table;
EXPORT_SYMBOL(intercept_table);
powerpc: Get 64-bit configs to compile with ARCH=powerpc This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:50:37 +08:00
#endif /* CONFIG_PPC_STD_MMU_32 */
[POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-11 13:15:47 +08:00
#ifdef CONFIG_PPC_DCR_NATIVE
powerpc: Fixes to get the merged kernel to boot on powermac. This merges ppc_ksyms.c, puts back the actual do_execve call in sys_execve, makes init_MMU call find_end_of_memory rather than ppc_md.find_end_of_memory (every platform has a device tree with a /memory node now, right?) and fixes some problems with the mpic initialization on newworld powermacs. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 18:28:14 +08:00
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
Copy Permalink