kernel_optimize_test/arch/x86_64/kernel/nmi.c

854 lines
20 KiB
C
Raw Normal View History

/*
* linux/arch/x86_64/nmi.c
*
* NMI watchdog support on APIC systems
*
* Started by Ingo Molnar <mingo@redhat.com>
*
* Fixes:
* Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
* Mikael Pettersson : Power Management for local APIC NMI watchdog.
* Pavel Machek and
* Mikael Pettersson : PM converted to driver model. Disable/enable API.
*/
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/sysdev.h>
#include <linux/nmi.h>
#include <linux/sysctl.h>
#include <linux/kprobes.h>
#include <asm/smp.h>
#include <asm/nmi.h>
#include <asm/proto.h>
#include <asm/kdebug.h>
#include <asm/mce.h>
/* perfctr_nmi_owner tracks the ownership of the perfctr registers:
* evtsel_nmi_owner tracks the ownership of the event selection
* - different performance counters/ event selection may be reserved for
* different subsystems this reservation system just tries to coordinate
* things a little
*/
static DEFINE_PER_CPU(unsigned, perfctr_nmi_owner);
static DEFINE_PER_CPU(unsigned, evntsel_nmi_owner[2]);
/* this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
* offset from MSR_P4_BSU_ESCR0. It will be the max for all platforms (for now)
*/
#define NMI_MAX_COUNTER_BITS 66
/*
* lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
* - it may be reserved by some other driver, or not
* - when not reserved by some other driver, it may be used for
* the NMI watchdog, or not
*
* This is maintained separately from nmi_active because the NMI
* watchdog may also be driven from the I/O APIC timer.
*/
static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
static unsigned int lapic_nmi_owner;
#define LAPIC_NMI_WATCHDOG (1<<0)
#define LAPIC_NMI_RESERVED (1<<1)
/* nmi_active:
* >0: the lapic NMI watchdog is active, but can be disabled
* <0: the lapic NMI watchdog has not been set up, and cannot
* be enabled
* 0: the lapic NMI watchdog is disabled, but can be enabled
*/
atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */
int panic_on_timeout;
unsigned int nmi_watchdog = NMI_DEFAULT;
static unsigned int nmi_hz = HZ;
struct nmi_watchdog_ctlblk {
int enabled;
u64 check_bit;
unsigned int cccr_msr;
unsigned int perfctr_msr; /* the MSR to reset in NMI handler */
unsigned int evntsel_msr; /* the MSR to select the events to handle */
};
static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
/* local prototypes */
static void stop_apic_nmi_watchdog(void *unused);
static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu);
/* converts an msr to an appropriate reservation bit */
static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
{
/* returns the bit offset of the performance counter register */
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
return (msr - MSR_K7_PERFCTR0);
case X86_VENDOR_INTEL:
return (msr - MSR_P4_BPU_PERFCTR0);
}
return 0;
}
/* converts an msr to an appropriate reservation bit */
static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
{
/* returns the bit offset of the event selection register */
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
return (msr - MSR_K7_EVNTSEL0);
case X86_VENDOR_INTEL:
return (msr - MSR_P4_BSU_ESCR0);
}
return 0;
}
/* checks for a bit availability (hack for oprofile) */
int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
{
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
}
/* checks the an msr for availability */
int avail_to_resrv_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
return (!test_bit(counter, &__get_cpu_var(perfctr_nmi_owner)));
}
int reserve_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
if (!test_and_set_bit(counter, &__get_cpu_var(perfctr_nmi_owner)))
return 1;
return 0;
}
void release_perfctr_nmi(unsigned int msr)
{
unsigned int counter;
counter = nmi_perfctr_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
clear_bit(counter, &__get_cpu_var(perfctr_nmi_owner));
}
int reserve_evntsel_nmi(unsigned int msr)
{
unsigned int counter;
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
if (!test_and_set_bit(counter, &__get_cpu_var(evntsel_nmi_owner)))
return 1;
return 0;
}
void release_evntsel_nmi(unsigned int msr)
{
unsigned int counter;
counter = nmi_evntsel_msr_to_bit(msr);
BUG_ON(counter > NMI_MAX_COUNTER_BITS);
clear_bit(counter, &__get_cpu_var(evntsel_nmi_owner));
}
static __cpuinit inline int nmi_known_cpu(void)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
return boot_cpu_data.x86 == 15;
case X86_VENDOR_INTEL:
return boot_cpu_data.x86 == 15;
}
return 0;
}
/* Run after command line and cpu_init init, but before all other checks */
void __cpuinit nmi_watchdog_default(void)
{
if (nmi_watchdog != NMI_DEFAULT)
return;
if (nmi_known_cpu())
nmi_watchdog = NMI_LOCAL_APIC;
else
nmi_watchdog = NMI_IO_APIC;
}
#ifdef CONFIG_SMP
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
* the CPU is idle. To make sure the NMI watchdog really ticks on all
* CPUs during the test make them busy.
*/
static __init void nmi_cpu_busy(void *data)
{
volatile int *endflag = data;
local_irq_enable_in_hardirq();
/* Intentionally don't use cpu_relax here. This is
to make sure that the performance counter really ticks,
even if there is a simulator or similar that catches the
pause instruction. On a real HT machine this is fine because
all other CPUs are busy with "useless" delay loops and don't
care if they get somewhat less cycles. */
while (*endflag == 0)
barrier();
}
#endif
int __init check_nmi_watchdog (void)
{
volatile int endflag = 0;
int *counts;
int cpu;
if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT))
return 0;
if (!atomic_read(&nmi_active))
return 0;
counts = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!counts)
return -1;
printk(KERN_INFO "testing NMI watchdog ... ");
#ifdef CONFIG_SMP
if (nmi_watchdog == NMI_LOCAL_APIC)
smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
#endif
for (cpu = 0; cpu < NR_CPUS; cpu++)
counts[cpu] = cpu_pda(cpu)->__nmi_count;
local_irq_enable();
mdelay((10*1000)/nmi_hz); // wait 10 ticks
for_each_online_cpu(cpu) {
if (!per_cpu(nmi_watchdog_ctlblk, cpu).enabled)
continue;
if (cpu_pda(cpu)->__nmi_count - counts[cpu] <= 5) {
printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
cpu,
counts[cpu],
cpu_pda(cpu)->__nmi_count);
per_cpu(nmi_watchdog_ctlblk, cpu).enabled = 0;
atomic_dec(&nmi_active);
}
}
if (!atomic_read(&nmi_active)) {
kfree(counts);
atomic_set(&nmi_active, -1);
return -1;
}
endflag = 1;
printk("OK.\n");
/* now that we know it works we can reduce NMI frequency to
something more reasonable; makes a difference in some configs */
if (nmi_watchdog == NMI_LOCAL_APIC)
nmi_hz = 1;
kfree(counts);
return 0;
}
int __init setup_nmi_watchdog(char *str)
{
int nmi;
if (!strncmp(str,"panic",5)) {
panic_on_timeout = 1;
str = strchr(str, ',');
if (!str)
return 1;
++str;
}
get_option(&str, &nmi);
if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE))
return 0;
if ((nmi == NMI_LOCAL_APIC) && (nmi_known_cpu() == 0))
return 0; /* no lapic support */
nmi_watchdog = nmi;
return 1;
}
__setup("nmi_watchdog=", setup_nmi_watchdog);
static void disable_lapic_nmi_watchdog(void)
{
BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
if (atomic_read(&nmi_active) <= 0)
return;
on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
BUG_ON(atomic_read(&nmi_active) != 0);
}
static void enable_lapic_nmi_watchdog(void)
{
BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
/* are we already enabled */
if (atomic_read(&nmi_active) != 0)
return;
/* are we lapic aware */
if (nmi_known_cpu() <= 0)
return;
on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
touch_nmi_watchdog();
}
int reserve_lapic_nmi(void)
{
unsigned int old_owner;
spin_lock(&lapic_nmi_owner_lock);
old_owner = lapic_nmi_owner;
lapic_nmi_owner |= LAPIC_NMI_RESERVED;
spin_unlock(&lapic_nmi_owner_lock);
if (old_owner & LAPIC_NMI_RESERVED)
return -EBUSY;
if (old_owner & LAPIC_NMI_WATCHDOG)
disable_lapic_nmi_watchdog();
return 0;
}
void release_lapic_nmi(void)
{
unsigned int new_owner;
spin_lock(&lapic_nmi_owner_lock);
new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
lapic_nmi_owner = new_owner;
spin_unlock(&lapic_nmi_owner_lock);
if (new_owner & LAPIC_NMI_WATCHDOG)
enable_lapic_nmi_watchdog();
}
void disable_timer_nmi_watchdog(void)
{
BUG_ON(nmi_watchdog != NMI_IO_APIC);
if (atomic_read(&nmi_active) <= 0)
return;
disable_irq(0);
on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
BUG_ON(atomic_read(&nmi_active) != 0);
}
void enable_timer_nmi_watchdog(void)
{
BUG_ON(nmi_watchdog != NMI_IO_APIC);
if (atomic_read(&nmi_active) == 0) {
touch_nmi_watchdog();
on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
enable_irq(0);
}
}
#ifdef CONFIG_PM
static int nmi_pm_active; /* nmi_active before suspend */
static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
{
nmi_pm_active = atomic_read(&nmi_active);
disable_lapic_nmi_watchdog();
return 0;
}
static int lapic_nmi_resume(struct sys_device *dev)
{
if (nmi_pm_active > 0)
enable_lapic_nmi_watchdog();
return 0;
}
static struct sysdev_class nmi_sysclass = {
set_kset_name("lapic_nmi"),
.resume = lapic_nmi_resume,
.suspend = lapic_nmi_suspend,
};
static struct sys_device device_lapic_nmi = {
.id = 0,
.cls = &nmi_sysclass,
};
static int __init init_lapic_nmi_sysfs(void)
{
int error;
/* should really be a BUG_ON but b/c this is an
* init call, it just doesn't work. -dcz
*/
if (nmi_watchdog != NMI_LOCAL_APIC)
return 0;
if ( atomic_read(&nmi_active) < 0 )
return 0;
error = sysdev_class_register(&nmi_sysclass);
if (!error)
error = sysdev_register(&device_lapic_nmi);
return error;
}
/* must come after the local APIC's device_initcall() */
late_initcall(init_lapic_nmi_sysfs);
#endif /* CONFIG_PM */
/*
* Activate the NMI watchdog via the local APIC.
* Original code written by Keith Owens.
*/
/* Note that these events don't tick when the CPU idles. This means
the frequency varies with CPU load. */
#define K7_EVNTSEL_ENABLE (1 << 22)
#define K7_EVNTSEL_INT (1 << 20)
#define K7_EVNTSEL_OS (1 << 17)
#define K7_EVNTSEL_USR (1 << 16)
#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
static int setup_k7_watchdog(void)
{
unsigned int perfctr_msr, evntsel_msr;
unsigned int evntsel;
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
perfctr_msr = MSR_K7_PERFCTR0;
evntsel_msr = MSR_K7_EVNTSEL0;
if (!reserve_perfctr_nmi(perfctr_msr))
goto fail;
if (!reserve_evntsel_nmi(evntsel_msr))
goto fail1;
/* Simulator may not support it */
if (checking_wrmsrl(evntsel_msr, 0UL))
goto fail2;
wrmsrl(perfctr_msr, 0UL);
evntsel = K7_EVNTSEL_INT
| K7_EVNTSEL_OS
| K7_EVNTSEL_USR
| K7_NMI_EVENT;
/* setup the timer */
wrmsr(evntsel_msr, evntsel, 0);
wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
apic_write(APIC_LVTPC, APIC_DM_NMI);
evntsel |= K7_EVNTSEL_ENABLE;
wrmsr(evntsel_msr, evntsel, 0);
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = 0; //unused
wd->check_bit = 1ULL<<63;
return 1;
fail2:
release_evntsel_nmi(evntsel_msr);
fail1:
release_perfctr_nmi(perfctr_msr);
fail:
return 0;
}
static void stop_k7_watchdog(void)
{
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
wrmsr(wd->evntsel_msr, 0, 0);
release_evntsel_nmi(wd->evntsel_msr);
release_perfctr_nmi(wd->perfctr_msr);
}
/* Note that these events don't tick when the CPU idles. This means
the frequency varies with CPU load. */
#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
#define P4_ESCR_OS (1<<3)
#define P4_ESCR_USR (1<<2)
#define P4_CCCR_OVF_PMI0 (1<<26)
#define P4_CCCR_OVF_PMI1 (1<<27)
#define P4_CCCR_THRESHOLD(N) ((N)<<20)
#define P4_CCCR_COMPLEMENT (1<<19)
#define P4_CCCR_COMPARE (1<<18)
#define P4_CCCR_REQUIRED (3<<16)
#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
#define P4_CCCR_ENABLE (1<<12)
#define P4_CCCR_OVF (1<<31)
/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
CRU_ESCR0 (with any non-null event selector) through a complemented
max threshold. [IA32-Vol3, Section 14.9.9] */
static int setup_p4_watchdog(void)
{
unsigned int perfctr_msr, evntsel_msr, cccr_msr;
unsigned int evntsel, cccr_val;
unsigned int misc_enable, dummy;
unsigned int ht_num;
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
return 0;
#ifdef CONFIG_SMP
/* detect which hyperthread we are on */
if (smp_num_siblings == 2) {
unsigned int ebx, apicid;
ebx = cpuid_ebx(1);
apicid = (ebx >> 24) & 0xff;
ht_num = apicid & 1;
} else
#endif
ht_num = 0;
/* performance counters are shared resources
* assign each hyperthread its own set
* (re-use the ESCR0 register, seems safe
* and keeps the cccr_val the same)
*/
if (!ht_num) {
/* logical cpu 0 */
perfctr_msr = MSR_P4_IQ_PERFCTR0;
evntsel_msr = MSR_P4_CRU_ESCR0;
cccr_msr = MSR_P4_IQ_CCCR0;
cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
} else {
/* logical cpu 1 */
perfctr_msr = MSR_P4_IQ_PERFCTR1;
evntsel_msr = MSR_P4_CRU_ESCR0;
cccr_msr = MSR_P4_IQ_CCCR1;
cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
}
if (!reserve_perfctr_nmi(perfctr_msr))
goto fail;
if (!reserve_evntsel_nmi(evntsel_msr))
goto fail1;
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
| P4_ESCR_OS
| P4_ESCR_USR;
cccr_val |= P4_CCCR_THRESHOLD(15)
| P4_CCCR_COMPLEMENT
| P4_CCCR_COMPARE
| P4_CCCR_REQUIRED;
wrmsr(evntsel_msr, evntsel, 0);
wrmsr(cccr_msr, cccr_val, 0);
wrmsrl(perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
apic_write(APIC_LVTPC, APIC_DM_NMI);
cccr_val |= P4_CCCR_ENABLE;
wrmsr(cccr_msr, cccr_val, 0);
wd->perfctr_msr = perfctr_msr;
wd->evntsel_msr = evntsel_msr;
wd->cccr_msr = cccr_msr;
wd->check_bit = 1ULL<<39;
return 1;
fail1:
release_perfctr_nmi(perfctr_msr);
fail:
return 0;
}
static void stop_p4_watchdog(void)
{
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
wrmsr(wd->cccr_msr, 0, 0);
wrmsr(wd->evntsel_msr, 0, 0);
release_evntsel_nmi(wd->evntsel_msr);
release_perfctr_nmi(wd->perfctr_msr);
}
void setup_apic_nmi_watchdog(void *unused)
{
/* only support LOCAL and IO APICs for now */
if ((nmi_watchdog != NMI_LOCAL_APIC) &&
(nmi_watchdog != NMI_IO_APIC))
return;
if (nmi_watchdog == NMI_LOCAL_APIC) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
return;
if (!setup_k7_watchdog())
return;
break;
case X86_VENDOR_INTEL:
if (!setup_p4_watchdog())
return;
break;
default:
return;
}
}
__get_cpu_var(nmi_watchdog_ctlblk.enabled) = 1;
atomic_inc(&nmi_active);
}
static void stop_apic_nmi_watchdog(void *unused)
{
/* only support LOCAL and IO APICs for now */
if ((nmi_watchdog != NMI_LOCAL_APIC) &&
(nmi_watchdog != NMI_IO_APIC))
return;
if (nmi_watchdog == NMI_LOCAL_APIC) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
if (strstr(boot_cpu_data.x86_model_id, "Screwdriver"))
return;
stop_k7_watchdog();
break;
case X86_VENDOR_INTEL:
stop_p4_watchdog();
break;
default:
return;
}
}
__get_cpu_var(nmi_watchdog_ctlblk.enabled) = 0;
atomic_dec(&nmi_active);
}
/*
* the best way to detect whether a CPU has a 'hard lockup' problem
* is to check it's local APIC timer IRQ counts. If they are not
* changing then that CPU has some problem.
*
* as these watchdog NMI IRQs are generated on every CPU, we only
* have to check the current processor.
*/
static DEFINE_PER_CPU(unsigned, last_irq_sum);
static DEFINE_PER_CPU(local_t, alert_counter);
static DEFINE_PER_CPU(int, nmi_touch);
void touch_nmi_watchdog (void)
{
if (nmi_watchdog > 0) {
unsigned cpu;
/*
* Tell other CPUs to reset their alert counters. We cannot
* do it ourselves because the alert count increase is not
* atomic.
*/
for_each_present_cpu (cpu)
per_cpu(nmi_touch, cpu) = 1;
}
touch_softlockup_watchdog();
}
int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
{
int sum;
int touched = 0;
struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
u64 dummy;
int rc=0;
/* check for other users first */
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
== NOTIFY_STOP) {
rc = 1;
touched = 1;
}
sum = read_pda(apic_timer_irqs);
if (__get_cpu_var(nmi_touch)) {
__get_cpu_var(nmi_touch) = 0;
touched = 1;
}
#ifdef CONFIG_X86_MCE
/* Could check oops_in_progress here too, but it's safer
not too */
if (atomic_read(&mce_entry) > 0)
touched = 1;
#endif
/* if the apic timer isn't firing, this cpu isn't doing much */
if (!touched && __get_cpu_var(last_irq_sum) == sum) {
/*
* Ayiee, looks like this CPU is stuck ...
* wait a few IRQs (5 seconds) before doing the oops ...
*/
local_inc(&__get_cpu_var(alert_counter));
if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz)
die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs);
} else {
__get_cpu_var(last_irq_sum) = sum;
local_set(&__get_cpu_var(alert_counter), 0);
}
/* see if the nmi watchdog went off */
if (wd->enabled) {
if (nmi_watchdog == NMI_LOCAL_APIC) {
rdmsrl(wd->perfctr_msr, dummy);
if (dummy & wd->check_bit){
/* this wasn't a watchdog timer interrupt */
goto done;
}
/* only Intel uses the cccr msr */
if (wd->cccr_msr != 0) {
/*
* P4 quirks:
* - An overflown perfctr will assert its interrupt
* until the OVF flag in its CCCR is cleared.
* - LVTPC is masked on interrupt and must be
* unmasked by the LVTPC handler.
*/
rdmsrl(wd->cccr_msr, dummy);
dummy &= ~P4_CCCR_OVF;
wrmsrl(wd->cccr_msr, dummy);
apic_write(APIC_LVTPC, APIC_DM_NMI);
}
/* start the cycle over again */
wrmsrl(wd->perfctr_msr, -((u64)cpu_khz * 1000 / nmi_hz));
rc = 1;
} else if (nmi_watchdog == NMI_IO_APIC) {
/* don't know how to accurately check for this.
* just assume it was a watchdog timer interrupt
* This matches the old behaviour.
*/
rc = 1;
} else
printk(KERN_WARNING "Unknown enabled NMI hardware?!\n");
}
done:
return rc;
}
static __kprobes int dummy_nmi_callback(struct pt_regs * regs, int cpu)
{
return 0;
}
static nmi_callback_t nmi_callback = dummy_nmi_callback;
asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
{
nmi_enter();
add_pda(__nmi_count,1);
default_do_nmi(regs);
nmi_exit();
}
int do_nmi_callback(struct pt_regs * regs, int cpu)
{
return rcu_dereference(nmi_callback)(regs, cpu);
}
void set_nmi_callback(nmi_callback_t callback)
{
vmalloc_sync_all();
rcu_assign_pointer(nmi_callback, callback);
}
EXPORT_SYMBOL_GPL(set_nmi_callback);
void unset_nmi_callback(void)
{
nmi_callback = dummy_nmi_callback;
}
EXPORT_SYMBOL_GPL(unset_nmi_callback);
#ifdef CONFIG_SYSCTL
static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
{
unsigned char reason = get_nmi_reason();
char buf[64];
if (!(reason & 0xc0)) {
sprintf(buf, "NMI received for unknown reason %02x\n", reason);
die_nmi(buf,regs);
}
return 0;
}
/*
* proc handler for /proc/sys/kernel/unknown_nmi_panic
*/
int proc_unknown_nmi_panic(struct ctl_table *table, int write, struct file *file,
void __user *buffer, size_t *length, loff_t *ppos)
{
int old_state;
old_state = unknown_nmi_panic;
proc_dointvec(table, write, file, buffer, length, ppos);
if (!!old_state == !!unknown_nmi_panic)
return 0;
if (unknown_nmi_panic) {
if (reserve_lapic_nmi() < 0) {
unknown_nmi_panic = 0;
return -EBUSY;
} else {
set_nmi_callback(unknown_nmi_panic_callback);
}
} else {
release_lapic_nmi();
unset_nmi_callback();
}
return 0;
}
#endif
EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi);
EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
EXPORT_SYMBOL(reserve_perfctr_nmi);
EXPORT_SYMBOL(release_perfctr_nmi);
EXPORT_SYMBOL(reserve_evntsel_nmi);
EXPORT_SYMBOL(release_evntsel_nmi);
EXPORT_SYMBOL(reserve_lapic_nmi);
EXPORT_SYMBOL(release_lapic_nmi);
EXPORT_SYMBOL(disable_timer_nmi_watchdog);
EXPORT_SYMBOL(enable_timer_nmi_watchdog);
EXPORT_SYMBOL(touch_nmi_watchdog);