AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
a80ae5306a
kernel_optimize_test/net/tipc/node.h

95 lines
4.2 KiB
C
Raw Normal View History

[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
/*
* net/tipc/node.h: Include file for TIPC node management routines
[NET] TIPC: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:25:21 +08:00
*
tipc: transfer broadcast nacks in link state messages When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 01:52:49 +08:00
* Copyright (c) 2000-2006, 2014-2016, Ericsson AB
tipc: rename node create lock to protect node list and hlist When a node is created, tipc_net_lock read lock is first held and then node_create_lock is grabbed in order to prevent the same node from being created and inserted into both node list and hlist twice. But when we query node from the two node lists, we only hold tipc_net_lock read lock without grabbing node_create_lock. Obviously this locking policy is unable to guarantee that the two node lists are always synchronized especially when the operation of changing and accessing them occurs in different contexts like currently doing. Therefore, rename node_create_lock to node_list_lock to protect the two node lists, that is, whenever node is inserted into them or node is queried from them, the node_list_lock should be always held. As a result, tipc_net_lock read lock becomes redundant and then can be removed from the node query functions. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27 12:54:36 +08:00
* Copyright (c) 2005, 2010-2014, Wind River Systems
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
* All rights reserved.
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 20:30:43 +08:00
* Redistribution and use in source and binary forms, with or without
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
* modification, are permitted provided that the following conditions are met:
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 20:30:43 +08:00
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 20:30:43 +08:00
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_NODE_H
#define _TIPC_NODE_H
tipc: Remove prototype code for supporting multiple clusters Eliminates routines, data structures, and files that were intended to allow TIPC to support a network containing multiple clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01 02:59:19 +08:00
#include "addr.h"
#include "net.h"
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
#include "bearer.h"
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26 09:41:33 +08:00
#include "msg.h"
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
tipc: introduce capability bit for broadcast synchronization Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 20:51:40 +08:00
/* Optional capabilities supported by this code version
*/
enum {
tipc: transfer broadcast nacks in link state messages When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 01:52:49 +08:00
TIPC_BCAST_SYNCH = (1 << 1),
TIPC_BCAST_STATE_NACK = (1 << 2),
tipc: make replicast a user selectable option If the bearer carrying multicast messages supports broadcast, those messages will be sent to all cluster nodes, irrespective of whether these nodes host any actual destinations socket or not. This is clearly wasteful if the cluster is large and there are only a few real destinations for the message being sent. In this commit we extend the eligibility of the newly introduced "replicast" transmit option. We now make it possible for a user to select which method he wants to be used, either as a mandatory setting via setsockopt(), or as a relative setting where we let the broadcast layer decide which method to use based on the ratio between cluster size and the message's actual number of destination nodes. In the latter case, a sending socket must stick to a previously selected method until it enters an idle period of at least 5 seconds. This eliminates the risk of message reordering caused by method change, i.e., when changes to cluster size or number of destinations would otherwise mandate a new method to be used. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-19 02:50:53 +08:00
TIPC_BLOCK_FLOWCTL = (1 << 3),
TIPC_BCAST_RCAST = (1 << 4)
tipc: introduce capability bit for broadcast synchronization Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 20:51:40 +08:00
};
tipc: transfer broadcast nacks in link state messages When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 01:52:49 +08:00
#define TIPC_NODE_CAPABILITIES (TIPC_BCAST_SYNCH | \
TIPC_BCAST_STATE_NACK | \
tipc: make replicast a user selectable option If the bearer carrying multicast messages supports broadcast, those messages will be sent to all cluster nodes, irrespective of whether these nodes host any actual destinations socket or not. This is clearly wasteful if the cluster is large and there are only a few real destinations for the message being sent. In this commit we extend the eligibility of the newly introduced "replicast" transmit option. We now make it possible for a user to select which method he wants to be used, either as a mandatory setting via setsockopt(), or as a relative setting where we let the broadcast layer decide which method to use based on the ratio between cluster size and the message's actual number of destination nodes. In the latter case, a sending socket must stick to a previously selected method until it enters an idle period of at least 5 seconds. This eliminates the risk of message reordering caused by method change, i.e., when changes to cluster size or number of destinations would otherwise mandate a new method to be used. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-19 02:50:53 +08:00
TIPC_BCAST_RCAST | \
tipc: transfer broadcast nacks in link state messages When we send broadcasts in clusters of more 70-80 nodes, we sometimes see the broadcast link resetting because of an excessive number of retransmissions. This is caused by a combination of two factors: 1) A 'NACK crunch", where loss of broadcast packets is discovered and NACK'ed by several nodes simultaneously, leading to multiple redundant broadcast retransmissions. 2) The fact that the NACKS as such also are sent as broadcast, leading to excessive load and packet loss on the transmitting switch/bridge. This commit deals with the latter problem, by moving sending of broadcast nacks from the dedicated BCAST_PROTOCOL/NACK message type to regular unicast LINK_PROTOCOL/STATE messages. We allocate 10 unused bits in word 8 of the said message for this purpose, and introduce a new capability bit, TIPC_BCAST_STATE_NACK in order to keep the change backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02 01:52:49 +08:00
TIPC_BLOCK_FLOWCTL)
tipc: narrow down interface towards struct tipc_link We move the definition of struct tipc_link from link.h to link.c in order to minimize its exposure to the rest of the code. When needed, we define new functions to make it possible for external entities to access and set data in the link. Apart from the above, there are no functional changes. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 03:30:46 +08:00
#define INVALID_BEARER_ID -1
tipc: introduce capability bit for broadcast synchronization Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 20:51:40 +08:00
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 15:27:05 +08:00
void tipc_node_stop(struct net *net);
tipc: move received discovery data evaluation inside node.c The node lock is currently grabbed and and released in the function tipc_disc_rcv() in the file discover.c. As a preparation for the next commits, we need to move this node lock handling, along with the code area it is covering, to node.c. This commit introduces this change. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 06:24:22 +08:00
void tipc_node_check_dest(struct net *net, u32 onode,
struct tipc_bearer *bearer,
u16 capabilities, u32 signature,
struct tipc_media_addr *maddr,
bool *respond, bool *dupl_addr);
tipc: move all link_reset() calls to link aggregation level In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31 06:24:16 +08:00
void tipc_node_delete_links(struct net *net, int bearer_id);
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 15:27:05 +08:00
int tipc_node_get_linkname(struct net *net, u32 bearer_id, u32 node,
char *linkname, size_t len);
tipc: make media xmit call outside node spinlock context Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 04:54:24 +08:00
int tipc_node_xmit(struct net *net, struct sk_buff_head *list, u32 dnode,
int selector);
tipc: add new function for sending multiple small messages We see an increasing need to send multiple single-buffer messages of TIPC_SYSTEM_IMPORTANCE to different individual destination nodes. Instead of looping over the send queue and sending each buffer individually, as we do now, we add a new help function tipc_node_distr_xmit() to do this. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13 17:04:21 +08:00
int tipc_node_distr_xmit(struct net *net, struct sk_buff_head *list);
tipc: make media xmit call outside node spinlock context Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-17 04:54:24 +08:00
int tipc_node_xmit_skb(struct net *net, struct sk_buff *skb, u32 dest,
u32 selector);
tipc: reduce code dependency between binding table and node layer The file name_distr.c currently contains three functions, named_cluster_distribute(), tipc_publ_subcscribe() and tipc_publ_unsubscribe() that all directly access fields in struct tipc_node. We want to eliminate such dependencies, so we move those functions to the file node.c and rename them to tipc_node_broadcast(), tipc_node_subscribe() and tipc_node_unsubscribe() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 03:30:42 +08:00
void tipc_node_subscribe(struct net *net, struct list_head *subscr, u32 addr);
void tipc_node_unsubscribe(struct net *net, struct list_head *subscr, u32 addr);
void tipc_node_broadcast(struct net *net, struct sk_buff *skb);
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 15:27:05 +08:00
int tipc_node_add_conn(struct net *net, u32 dnode, u32 port, u32 peer_port);
void tipc_node_remove_conn(struct net *net, u32 dnode, u32 port);
tipc: narrow down exposure of struct tipc_node In our effort to have less code and include dependencies between entities such as node, link and bearer, we try to narrow down the exposed interface towards the node as much as possible. In this commit, we move the definition of struct tipc_node, along with many of its associated function declarations, from node.h to node.c. We also move some function definitions from link.c and name_distr.c to node.c, since they access fields in struct tipc_node that should not be externally visible. The moved functions are renamed according to new location, and made static whenever possible. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 03:30:45 +08:00
int tipc_node_get_mtu(struct net *net, u32 addr, u32 sel);
tipc: add ability to obtain node availability status from other files In the coming commits, functions at the socket level will need the ability to read the availability status of a given node. We therefore introduce a new function for this purpose, while renaming the existing static function currently having the wanted name. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13 17:04:19 +08:00
bool tipc_node_is_up(struct net *net, u32 addr);
tipc: propagate peer node capabilities to socket layer During neighbor discovery, nodes advertise their capabilities as a bit map in a dedicated 16-bit field in the discovery message header. This bit map has so far only be stored in the node structure on the peer nodes, but we now see the need to keep a copy even in the socket structure. This commit adds this functionality. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 23:58:46 +08:00
u16 tipc_node_get_capabilities(struct net *net, u32 addr);
tipc: add node get/dump to new netlink api Add TIPC_NL_NODE_GET to the new tipc netlink API. This command can dump the address and node status of all nodes in the tipc cluster. Netlink logical layout of returned node/address data: -> node -> address -> up flag Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 17:29:17 +08:00
int tipc_nl_node_dump(struct sk_buff *skb, struct netlink_callback *cb);
tipc: narrow down interface towards struct tipc_link We move the definition of struct tipc_link from link.h to link.c in order to minimize its exposure to the rest of the code. When needed, we define new functions to make it possible for external entities to access and set data in the link. Apart from the above, there are no functional changes. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 03:30:46 +08:00
int tipc_nl_node_dump_link(struct sk_buff *skb, struct netlink_callback *cb);
tipc: narrow down exposure of struct tipc_node In our effort to have less code and include dependencies between entities such as node, link and bearer, we try to narrow down the exposed interface towards the node as much as possible. In this commit, we move the definition of struct tipc_node, along with many of its associated function declarations, from node.h to node.c. We also move some function definitions from link.c and name_distr.c to node.c, since they access fields in struct tipc_node that should not be externally visible. The moved functions are renamed according to new location, and made static whenever possible. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-20 03:30:45 +08:00
int tipc_nl_node_reset_link_stats(struct sk_buff *skb, struct genl_info *info);
int tipc_nl_node_get_link(struct sk_buff *skb, struct genl_info *info);
int tipc_nl_node_set_link(struct sk_buff *skb, struct genl_info *info);
tipc: add peer removal functionality Add TIPC_NL_PEER_REMOVE netlink command. This command can remove an offline peer node from the internal data structures. This will be supported by the tipc user space tool in iproute2. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18 16:33:52 +08:00
int tipc_nl_peer_rm(struct sk_buff *skb, struct genl_info *info);
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-26 09:41:33 +08:00
tipc: make cluster size threshold for monitoring configurable In this commit, we introduce support to configure the minimum threshold to activate the new link monitoring algorithm. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:47:19 +08:00
int tipc_nl_node_set_monitor(struct sk_buff *skb, struct genl_info *info);
tipc: get monitor threshold for the cluster In this commit, we add support to fetch the configured cluster monitoring threshold. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:47:20 +08:00
int tipc_nl_node_get_monitor(struct sk_buff *skb, struct genl_info *info);
tipc: dump monitor attributes In this commit, we dump the monitor attributes when queried. The link monitor attributes are separated into two kinds: 1. general attributes per bearer 2. specific attributes per node/peer This style resembles the socket attributes and the nametable publications per socket. Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-26 14:47:22 +08:00
int tipc_nl_node_dump_monitor(struct sk_buff *skb, struct netlink_callback *cb);
int tipc_nl_node_dump_monitor_peer(struct sk_buff *skb,
struct netlink_callback *cb);
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-03 02:04:38 +08:00
#endif
Copy Permalink