kernel_optimize_test/security/selinux/include/security.h

392 lines
11 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Security server interface.
*
* Author : Stephen Smalley, <sds@tycho.nsa.gov>
*
*/
#ifndef _SELINUX_SECURITY_H_
#define _SELINUX_SECURITY_H_
#include <linux/compiler.h>
#include <linux/dcache.h>
#include <linux/magic.h>
#include <linux/types.h>
#include <linux/refcount.h>
#include <linux/workqueue.h>
#include "flask.h"
#define SECSID_NULL 0x00000000 /* unspecified SID */
#define SECSID_WILD 0xffffffff /* wildcard SID */
#define SECCLASS_NULL 0x0000 /* no class */
/* Identify specific policy version changes */
#define POLICYDB_VERSION_BASE 15
#define POLICYDB_VERSION_BOOL 16
#define POLICYDB_VERSION_IPV6 17
#define POLICYDB_VERSION_NLCLASS 18
#define POLICYDB_VERSION_VALIDATETRANS 19
#define POLICYDB_VERSION_MLS 19
#define POLICYDB_VERSION_AVTAB 20
#define POLICYDB_VERSION_RANGETRANS 21
#define POLICYDB_VERSION_POLCAP 22
#define POLICYDB_VERSION_PERMISSIVE 23
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
#define POLICYDB_VERSION_BOUNDARY 24
#define POLICYDB_VERSION_FILENAME_TRANS 25
#define POLICYDB_VERSION_ROLETRANS 26
SELinux: allow default source/target selectors for user/role/range When new objects are created we have great and flexible rules to determine the type of the new object. We aren't quite as flexible or mature when it comes to determining the user, role, and range. This patch adds a new ability to specify the place a new objects user, role, and range should come from. For users and roles it can come from either the source or the target of the operation. aka for files the user can either come from the source (the running process and todays default) or it can come from the target (aka the parent directory of the new file) examples always are done with directory context: system_u:object_r:mnt_t:s0-s0:c0.c512 process context: unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 [no rule] unconfined_u:object_r:mnt_t:s0 test_none [default user source] unconfined_u:object_r:mnt_t:s0 test_user_source [default user target] system_u:object_r:mnt_t:s0 test_user_target [default role source] unconfined_u:unconfined_r:mnt_t:s0 test_role_source [default role target] unconfined_u:object_r:mnt_t:s0 test_role_target [default range source low] unconfined_u:object_r:mnt_t:s0 test_range_source_low [default range source high] unconfined_u:object_r:mnt_t:s0:c0.c1023 test_range_source_high [default range source low-high] unconfined_u:object_r:mnt_t:s0-s0:c0.c1023 test_range_source_low-high [default range target low] unconfined_u:object_r:mnt_t:s0 test_range_target_low [default range target high] unconfined_u:object_r:mnt_t:s0:c0.c512 test_range_target_high [default range target low-high] unconfined_u:object_r:mnt_t:s0-s0:c0.c512 test_range_target_low-high Signed-off-by: Eric Paris <eparis@redhat.com>
2012-03-21 02:35:12 +08:00
#define POLICYDB_VERSION_NEW_OBJECT_DEFAULTS 27
#define POLICYDB_VERSION_DEFAULT_TYPE 28
#define POLICYDB_VERSION_CONSTRAINT_NAMES 29
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
#define POLICYDB_VERSION_XPERMS_IOCTL 30
#define POLICYDB_VERSION_INFINIBAND 31
/* Range of policy versions we understand*/
#define POLICYDB_VERSION_MIN POLICYDB_VERSION_BASE
#define POLICYDB_VERSION_MAX POLICYDB_VERSION_INFINIBAND
/* Mask for just the mount related flags */
#define SE_MNTMASK 0x0f
/* Super block security struct flags for mount options */
/* BE CAREFUL, these need to be the low order bits for selinux_get_mnt_opts */
#define CONTEXT_MNT 0x01
#define FSCONTEXT_MNT 0x02
#define ROOTCONTEXT_MNT 0x04
#define DEFCONTEXT_MNT 0x08
#define SBLABEL_MNT 0x10
/* Non-mount related flags */
#define SE_SBINITIALIZED 0x0100
#define SE_SBPROC 0x0200
#define SE_SBGENFS 0x0400
#define CONTEXT_STR "context="
#define FSCONTEXT_STR "fscontext="
#define ROOTCONTEXT_STR "rootcontext="
#define DEFCONTEXT_STR "defcontext="
#define LABELSUPP_STR "seclabel"
struct netlbl_lsm_secattr;
extern int selinux_enabled;
/* Policy capabilities */
enum {
POLICYDB_CAPABILITY_NETPEER,
POLICYDB_CAPABILITY_OPENPERM,
selinux: support distinctions among all network address families Extend SELinux to support distinctions among all network address families implemented by the kernel by defining new socket security classes and mapping to them. Otherwise, many sockets are mapped to the generic socket class and are indistinguishable in policy. This has come up previously with regard to selectively allowing access to bluetooth sockets, and more recently with regard to selectively allowing access to AF_ALG sockets. Guido Trentalancia submitted a patch that took a similar approach to add only support for distinguishing AF_ALG sockets, but this generalizes his approach to handle all address families implemented by the kernel. Socket security classes are also added for ICMP and SCTP sockets. Socket security classes were not defined for AF_* values that are reserved but unimplemented in the kernel, e.g. AF_NETBEUI, AF_SECURITY, AF_ASH, AF_ECONET, AF_SNA, AF_WANPIPE. Backward compatibility is provided by only enabling the finer-grained socket classes if a new policy capability is set in the policy; older policies will behave as before. The legacy redhat1 policy capability that was only ever used in testing within Fedora for ptrace_child is reclaimed for this purpose; as far as I can tell, this policy capability is not enabled in any supported distro policy. Add a pair of conditional compilation guards to detect when new AF_* values are added so that we can update SELinux accordingly rather than having to belatedly update it long after new address families are introduced. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-01-09 23:07:30 +08:00
POLICYDB_CAPABILITY_EXTSOCKCLASS,
POLICYDB_CAPABILITY_ALWAYSNETWORK,
POLICYDB_CAPABILITY_CGROUPSECLABEL,
selinux: Generalize support for NNP/nosuid SELinux domain transitions As systemd ramps up enabling NNP (NoNewPrivileges) for system services, it is increasingly breaking SELinux domain transitions for those services and their descendants. systemd enables NNP not only for services whose unit files explicitly specify NoNewPrivileges=yes but also for services whose unit files specify any of the following options in combination with running without CAP_SYS_ADMIN (e.g. specifying User= or a CapabilityBoundingSet= without CAP_SYS_ADMIN): SystemCallFilter=, SystemCallArchitectures=, RestrictAddressFamilies=, RestrictNamespaces=, PrivateDevices=, ProtectKernelTunables=, ProtectKernelModules=, MemoryDenyWriteExecute=, or RestrictRealtime= as per the systemd.exec(5) man page. The end result is bad for the security of both SELinux-disabled and SELinux-enabled systems. Packagers have to turn off these options in the unit files to preserve SELinux domain transitions. For users who choose to disable SELinux, this means that they miss out on at least having the systemd-supported protections. For users who keep SELinux enabled, they may still be missing out on some protections because it isn't necessarily guaranteed that the SELinux policy for that service provides the same protections in all cases. commit 7b0d0b40cd78 ("selinux: Permit bounded transitions under NO_NEW_PRIVS or NOSUID.") allowed bounded transitions under NNP in order to support limited usage for sandboxing programs. However, defining typebounds for all of the affected service domains is impractical to implement in policy, since typebounds requires us to ensure that each domain is allowed everything all of its descendant domains are allowed, and this has to be repeated for the entire chain of domain transitions. There is no way to clone all allow rules from descendants to their ancestors in policy currently, and doing so would be undesirable even if it were practical, as it requires leaking permissions to objects and operations into ancestor domains that could weaken their own security in order to allow them to the descendants (e.g. if a descendant requires execmem permission, then so do all of its ancestors; if a descendant requires execute permission to a file, then so do all of its ancestors; if a descendant requires read to a symbolic link or temporary file, then so do all of its ancestors...). SELinux domains are intentionally not hierarchical / bounded in this manner normally, and making them so would undermine their protections and least privilege. We have long had a similar tension with SELinux transitions and nosuid mounts, albeit not as severe. Users often have had to choose between retaining nosuid on a mount and allowing SELinux domain transitions on files within those mounts. This likewise leads to unfortunate tradeoffs in security. Decouple NNP/nosuid from SELinux transitions, so that we don't have to make a choice between them. Introduce a nnp_nosuid_transition policy capability that enables transitions under NNP/nosuid to be based on a permission (nnp_transition for NNP; nosuid_transition for nosuid) between the old and new contexts in addition to the current support for bounded transitions. Domain transitions can then be allowed in policy without requiring the parent to be a strict superset of all of its children. With this change, systemd unit files can be left unmodified from upstream. SELinux-disabled and SELinux-enabled users will benefit from retaining any of the systemd-provided protections. SELinux policy will only need to be adapted to enable the new policy capability and to allow the new permissions between domain pairs as appropriate. NB: Allowing nnp_transition between two contexts opens up the potential for the old context to subvert the new context by installing seccomp filters before the execve. Allowing nosuid_transition between two contexts opens up the potential for a context transition to occur on a file from an untrusted filesystem (e.g. removable media or remote filesystem). Use with care. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <paul@paul-moore.com>
2017-07-31 22:12:46 +08:00
POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION,
__POLICYDB_CAPABILITY_MAX
};
#define POLICYDB_CAPABILITY_MAX (__POLICYDB_CAPABILITY_MAX - 1)
extern char *selinux_policycap_names[__POLICYDB_CAPABILITY_MAX];
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
/*
* type_datum properties
* available at the kernel policy version >= POLICYDB_VERSION_BOUNDARY
*/
#define TYPEDATUM_PROPERTY_PRIMARY 0x0001
#define TYPEDATUM_PROPERTY_ATTRIBUTE 0x0002
/* limitation of boundary depth */
#define POLICYDB_BOUNDS_MAXDEPTH 4
struct selinux_ss;
struct selinux_state {
bool disabled;
#ifdef CONFIG_SECURITY_SELINUX_DEVELOP
bool enforcing;
#endif
bool checkreqprot;
bool initialized;
bool policycap[__POLICYDB_CAPABILITY_MAX];
struct selinux_ss *ss;
};
void selinux_ss_init(struct selinux_ss **ss);
extern struct selinux_state selinux_state;
#ifdef CONFIG_SECURITY_SELINUX_DEVELOP
static inline bool is_enforcing(struct selinux_state *state)
{
return state->enforcing;
}
static inline void set_enforcing(struct selinux_state *state, bool value)
{
state->enforcing = value;
}
#else
static inline bool is_enforcing(struct selinux_state *state)
{
return true;
}
static inline void set_enforcing(struct selinux_state *state, bool value)
{
}
#endif
static inline bool selinux_policycap_netpeer(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_NETPEER];
}
static inline bool selinux_policycap_openperm(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_OPENPERM];
}
static inline bool selinux_policycap_extsockclass(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_EXTSOCKCLASS];
}
static inline bool selinux_policycap_alwaysnetwork(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_ALWAYSNETWORK];
}
static inline bool selinux_policycap_cgroupseclabel(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_CGROUPSECLABEL];
}
static inline bool selinux_policycap_nnp_nosuid_transition(void)
{
struct selinux_state *state = &selinux_state;
return state->policycap[POLICYDB_CAPABILITY_NNP_NOSUID_TRANSITION];
}
int security_mls_enabled(struct selinux_state *state);
int security_load_policy(struct selinux_state *state,
void *data, size_t len);
int security_read_policy(struct selinux_state *state,
void **data, size_t *len);
size_t security_policydb_len(struct selinux_state *state);
int security_policycap_supported(struct selinux_state *state,
unsigned int req_cap);
#define SEL_VEC_MAX 32
struct av_decision {
u32 allowed;
u32 auditallow;
u32 auditdeny;
u32 seqno;
2009-04-01 09:07:57 +08:00
u32 flags;
};
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
#define XPERMS_ALLOWED 1
#define XPERMS_AUDITALLOW 2
#define XPERMS_DONTAUDIT 4
#define security_xperm_set(perms, x) (perms[x >> 5] |= 1 << (x & 0x1f))
#define security_xperm_test(perms, x) (1 & (perms[x >> 5] >> (x & 0x1f)))
struct extended_perms_data {
u32 p[8];
};
struct extended_perms_decision {
u8 used;
u8 driver;
struct extended_perms_data *allowed;
struct extended_perms_data *auditallow;
struct extended_perms_data *dontaudit;
};
struct extended_perms {
u16 len; /* length associated decision chain */
struct extended_perms_data drivers; /* flag drivers that are used */
};
2009-04-01 09:07:57 +08:00
/* definitions of av_decision.flags */
#define AVD_FLAGS_PERMISSIVE 0x0001
void security_compute_av(struct selinux_state *state,
u32 ssid, u32 tsid,
selinux: extended permissions for ioctls Add extended permissions logic to selinux. Extended permissions provides additional permissions in 256 bit increments. Extend the generic ioctl permission check to use the extended permissions for per-command filtering. Source/target/class sets including the ioctl permission may additionally include a set of commands. Example: allowxperm <source> <target>:<class> ioctl unpriv_app_socket_cmds auditallowxperm <source> <target>:<class> ioctl priv_gpu_cmds Where unpriv_app_socket_cmds and priv_gpu_cmds are macros representing commonly granted sets of ioctl commands. When ioctl commands are omitted only the permissions are checked. This feature is intended to provide finer granularity for the ioctl permission that may be too imprecise. For example, the same driver may use ioctls to provide important and benign functionality such as driver version or socket type as well as dangerous capabilities such as debugging features, read/write/execute to physical memory or access to sensitive data. Per-command filtering provides a mechanism to reduce the attack surface of the kernel, and limit applications to the subset of commands required. The format of the policy binary has been modified to include ioctl commands, and the policy version number has been incremented to POLICYDB_VERSION_XPERMS_IOCTL=30 to account for the format change. The extended permissions logic is deliberately generic to allow components to be reused e.g. netlink filters Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Acked-by: Nick Kralevich <nnk@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2015-07-11 05:19:56 +08:00
u16 tclass, struct av_decision *avd,
struct extended_perms *xperms);
void security_compute_xperms_decision(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
u8 driver,
struct extended_perms_decision *xpermd);
selinux: dynamic class/perm discovery Modify SELinux to dynamically discover class and permission values upon policy load, based on the dynamic object class/perm discovery logic from libselinux. A mapping is created between kernel-private class and permission indices used outside the security server and the policy values used within the security server. The mappings are only applied upon kernel-internal computations; similar mappings for the private indices of userspace object managers is handled on a per-object manager basis by the userspace AVC. The interfaces for compute_av and transition_sid are split for kernel vs. userspace; the userspace functions are distinguished by a _user suffix. The kernel-private class indices are no longer tied to the policy values and thus do not need to skip indices for userspace classes; thus the kernel class index values are compressed. The flask.h definitions were regenerated by deleting the userspace classes from refpolicy's definitions and then regenerating the headers. Going forward, we can just maintain the flask.h, av_permissions.h, and classmap.h definitions separately from policy as they are no longer tied to the policy values. The next patch introduces a utility to automate generation of flask.h and av_permissions.h from the classmap.h definitions. The older kernel class and permission string tables are removed and replaced by a single security class mapping table that is walked at policy load to generate the mapping. The old kernel class validation logic is completely replaced by the mapping logic. The handle unknown logic is reworked. reject_unknown=1 is handled when the mappings are computed at policy load time, similar to the old handling by the class validation logic. allow_unknown=1 is handled when computing and mapping decisions - if the permission was not able to be mapped (i.e. undefined, mapped to zero), then it is automatically added to the allowed vector. If the class was not able to be mapped (i.e. undefined, mapped to zero), then all permissions are allowed for it if allow_unknown=1. avc_audit leverages the new security class mapping table to lookup the class and permission names from the kernel-private indices. The mdp program is updated to use the new table when generating the class definitions and allow rules for a minimal boot policy for the kernel. It should be noted that this policy will not include any userspace classes, nor will its policy index values for the kernel classes correspond with the ones in refpolicy (they will instead match the kernel-private indices). Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-10-01 01:37:50 +08:00
void security_compute_av_user(struct selinux_state *state,
u32 ssid, u32 tsid,
u16 tclass, struct av_decision *avd);
int security_transition_sid(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
const struct qstr *qstr, u32 *out_sid);
selinux: dynamic class/perm discovery Modify SELinux to dynamically discover class and permission values upon policy load, based on the dynamic object class/perm discovery logic from libselinux. A mapping is created between kernel-private class and permission indices used outside the security server and the policy values used within the security server. The mappings are only applied upon kernel-internal computations; similar mappings for the private indices of userspace object managers is handled on a per-object manager basis by the userspace AVC. The interfaces for compute_av and transition_sid are split for kernel vs. userspace; the userspace functions are distinguished by a _user suffix. The kernel-private class indices are no longer tied to the policy values and thus do not need to skip indices for userspace classes; thus the kernel class index values are compressed. The flask.h definitions were regenerated by deleting the userspace classes from refpolicy's definitions and then regenerating the headers. Going forward, we can just maintain the flask.h, av_permissions.h, and classmap.h definitions separately from policy as they are no longer tied to the policy values. The next patch introduces a utility to automate generation of flask.h and av_permissions.h from the classmap.h definitions. The older kernel class and permission string tables are removed and replaced by a single security class mapping table that is walked at policy load to generate the mapping. The old kernel class validation logic is completely replaced by the mapping logic. The handle unknown logic is reworked. reject_unknown=1 is handled when the mappings are computed at policy load time, similar to the old handling by the class validation logic. allow_unknown=1 is handled when computing and mapping decisions - if the permission was not able to be mapped (i.e. undefined, mapped to zero), then it is automatically added to the allowed vector. If the class was not able to be mapped (i.e. undefined, mapped to zero), then all permissions are allowed for it if allow_unknown=1. avc_audit leverages the new security class mapping table to lookup the class and permission names from the kernel-private indices. The mdp program is updated to use the new table when generating the class definitions and allow rules for a minimal boot policy for the kernel. It should be noted that this policy will not include any userspace classes, nor will its policy index values for the kernel classes correspond with the ones in refpolicy (they will instead match the kernel-private indices). Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2009-10-01 01:37:50 +08:00
int security_transition_sid_user(struct selinux_state *state,
u32 ssid, u32 tsid, u16 tclass,
const char *objname, u32 *out_sid);
int security_member_sid(struct selinux_state *state, u32 ssid, u32 tsid,
u16 tclass, u32 *out_sid);
int security_change_sid(struct selinux_state *state, u32 ssid, u32 tsid,
u16 tclass, u32 *out_sid);
int security_sid_to_context(struct selinux_state *state, u32 sid,
char **scontext, u32 *scontext_len);
int security_sid_to_context_force(struct selinux_state *state,
u32 sid, char **scontext, u32 *scontext_len);
selinux: support deferred mapping of contexts Introduce SELinux support for deferred mapping of security contexts in the SID table upon policy reload, and use this support for inode security contexts when the context is not yet valid under the current policy. Only processes with CAP_MAC_ADMIN + mac_admin permission in policy can set undefined security contexts on inodes. Inodes with such undefined contexts are treated as having the unlabeled context until the context becomes valid upon a policy reload that defines the context. Context invalidation upon policy reload also uses this support to save the context information in the SID table and later recover it upon a subsequent policy reload that defines the context again. This support is to enable package managers and similar programs to set down file contexts unknown to the system policy at the time the file is created in order to better support placing loadable policy modules in packages and to support build systems that need to create images of different distro releases with different policies w/o requiring all of the contexts to be defined or legal in the build host policy. With this patch applied, the following sequence is possible, although in practice it is recommended that this permission only be allowed to specific program domains such as the package manager. # rmdir baz # rm bar # touch bar # chcon -t foo_exec_t bar # foo_exec_t is not yet defined chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument # cat setundefined.te policy_module(setundefined, 1.0) require { type unconfined_t; type unlabeled_t; } files_type(unlabeled_t) allow unconfined_t self:capability2 mac_admin; # make -f /usr/share/selinux/devel/Makefile setundefined.pp # semodule -i setundefined.pp # chcon -t foo_exec_t bar # foo_exec_t is not yet defined # mkdir -Z system_u:object_r:foo_exec_t baz # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # cat foo.te policy_module(foo, 1.0) type foo_exec_t; files_type(foo_exec_t) # make -f /usr/share/selinux/devel/Makefile foo.pp # semodule -i foo.pp # defines foo_exec_t # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r foo # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # semodule -i foo.pp # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r setundefined foo # chcon -t foo_exec_t bar # no longer defined and not allowed chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # rmdir baz # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-08 01:03:20 +08:00
int security_context_to_sid(struct selinux_state *state,
const char *scontext, u32 scontext_len,
selinux: add gfp argument to security_xfrm_policy_alloc and fix callers security_xfrm_policy_alloc can be called in atomic context so the allocation should be done with GFP_ATOMIC. Add an argument to let the callers choose the appropriate way. In order to do so a gfp argument needs to be added to the method xfrm_policy_alloc_security in struct security_operations and to the internal function selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic callers and leave GFP_KERNEL as before for the rest. The path that needed the gfp argument addition is: security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security -> all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) -> selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only) Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also add it to security_context_to_sid which is used inside and prior to this patch did only GFP_KERNEL allocation. So add gfp argument to security_context_to_sid and adjust all of its callers as well. CC: Paul Moore <paul@paul-moore.com> CC: Dave Jones <davej@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Fan Du <fan.du@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: LSM list <linux-security-module@vger.kernel.org> CC: SELinux list <selinux@tycho.nsa.gov> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-03-07 19:44:19 +08:00
u32 *out_sid, gfp_t gfp);
int security_context_str_to_sid(struct selinux_state *state,
const char *scontext, u32 *out_sid, gfp_t gfp);
int security_context_to_sid_default(struct selinux_state *state,
const char *scontext, u32 scontext_len,
u32 *out_sid, u32 def_sid, gfp_t gfp_flags);
int security_context_to_sid_force(struct selinux_state *state,
const char *scontext, u32 scontext_len,
selinux: support deferred mapping of contexts Introduce SELinux support for deferred mapping of security contexts in the SID table upon policy reload, and use this support for inode security contexts when the context is not yet valid under the current policy. Only processes with CAP_MAC_ADMIN + mac_admin permission in policy can set undefined security contexts on inodes. Inodes with such undefined contexts are treated as having the unlabeled context until the context becomes valid upon a policy reload that defines the context. Context invalidation upon policy reload also uses this support to save the context information in the SID table and later recover it upon a subsequent policy reload that defines the context again. This support is to enable package managers and similar programs to set down file contexts unknown to the system policy at the time the file is created in order to better support placing loadable policy modules in packages and to support build systems that need to create images of different distro releases with different policies w/o requiring all of the contexts to be defined or legal in the build host policy. With this patch applied, the following sequence is possible, although in practice it is recommended that this permission only be allowed to specific program domains such as the package manager. # rmdir baz # rm bar # touch bar # chcon -t foo_exec_t bar # foo_exec_t is not yet defined chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument # cat setundefined.te policy_module(setundefined, 1.0) require { type unconfined_t; type unlabeled_t; } files_type(unlabeled_t) allow unconfined_t self:capability2 mac_admin; # make -f /usr/share/selinux/devel/Makefile setundefined.pp # semodule -i setundefined.pp # chcon -t foo_exec_t bar # foo_exec_t is not yet defined # mkdir -Z system_u:object_r:foo_exec_t baz # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # cat foo.te policy_module(foo, 1.0) type foo_exec_t; files_type(foo_exec_t) # make -f /usr/share/selinux/devel/Makefile foo.pp # semodule -i foo.pp # defines foo_exec_t # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r foo # ls -Zd bar baz -rw-r--r-- root root system_u:object_r:unlabeled_t bar drwxr-xr-x root root system_u:object_r:unlabeled_t baz # semodule -i foo.pp # ls -Zd bar baz -rw-r--r-- root root user_u:object_r:foo_exec_t bar drwxr-xr-x root root system_u:object_r:foo_exec_t baz # semodule -r setundefined foo # chcon -t foo_exec_t bar # no longer defined and not allowed chcon: failed to change context of `bar' to `system_u:object_r:foo_exec_t': Invalid argument # rmdir baz # mkdir -Z system_u:object_r:foo_exec_t baz mkdir: failed to set default file creation context to `system_u:object_r:foo_exec_t': Invalid argument Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-05-08 01:03:20 +08:00
u32 *sid);
int security_get_user_sids(struct selinux_state *state,
u32 callsid, char *username,
u32 **sids, u32 *nel);
int security_port_sid(struct selinux_state *state,
u8 protocol, u16 port, u32 *out_sid);
int security_ib_pkey_sid(struct selinux_state *state,
u64 subnet_prefix, u16 pkey_num, u32 *out_sid);
int security_ib_endport_sid(struct selinux_state *state,
const char *dev_name, u8 port_num, u32 *out_sid);
int security_netif_sid(struct selinux_state *state,
char *name, u32 *if_sid);
int security_node_sid(struct selinux_state *state,
u16 domain, void *addr, u32 addrlen,
u32 *out_sid);
int security_validate_transition(struct selinux_state *state,
u32 oldsid, u32 newsid, u32 tasksid,
u16 tclass);
int security_validate_transition_user(struct selinux_state *state,
u32 oldsid, u32 newsid, u32 tasksid,
u16 tclass);
int security_bounded_transition(struct selinux_state *state,
u32 oldsid, u32 newsid);
SELinux: add boundary support and thread context assignment The purpose of this patch is to assign per-thread security context under a constraint. It enables multi-threaded server application to kick a request handler with its fair security context, and helps some of userspace object managers to handle user's request. When we assign a per-thread security context, it must not have wider permissions than the original one. Because a multi-threaded process shares a single local memory, an arbitary per-thread security context also means another thread can easily refer violated information. The constraint on a per-thread security context requires a new domain has to be equal or weaker than its original one, when it tries to assign a per-thread security context. Bounds relationship between two types is a way to ensure a domain can never have wider permission than its bounds. We can define it in two explicit or implicit ways. The first way is using new TYPEBOUNDS statement. It enables to define a boundary of types explicitly. The other one expand the concept of existing named based hierarchy. If we defines a type with "." separated name like "httpd_t.php", toolchain implicitly set its bounds on "httpd_t". This feature requires a new policy version. The 24th version (POLICYDB_VERSION_BOUNDARY) enables to ship them into kernel space, and the following patch enables to handle it. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: James Morris <jmorris@namei.org>
2008-08-28 15:35:57 +08:00
int security_sid_mls_copy(struct selinux_state *state,
u32 sid, u32 mls_sid, u32 *new_sid);
int security_net_peersid_resolve(struct selinux_state *state,
u32 nlbl_sid, u32 nlbl_type,
u32 xfrm_sid,
u32 *peer_sid);
int security_get_classes(struct selinux_state *state,
char ***classes, int *nclasses);
int security_get_permissions(struct selinux_state *state,
char *class, char ***perms, int *nperms);
int security_get_reject_unknown(struct selinux_state *state);
int security_get_allow_unknown(struct selinux_state *state);
#define SECURITY_FS_USE_XATTR 1 /* use xattr */
#define SECURITY_FS_USE_TRANS 2 /* use transition SIDs, e.g. devpts/tmpfs */
#define SECURITY_FS_USE_TASK 3 /* use task SIDs, e.g. pipefs/sockfs */
#define SECURITY_FS_USE_GENFS 4 /* use the genfs support */
#define SECURITY_FS_USE_NONE 5 /* no labeling support */
#define SECURITY_FS_USE_MNTPOINT 6 /* use mountpoint labeling */
#define SECURITY_FS_USE_NATIVE 7 /* use native label support */
#define SECURITY_FS_USE_MAX 7 /* Highest SECURITY_FS_USE_XXX */
int security_fs_use(struct selinux_state *state, struct super_block *sb);
int security_genfs_sid(struct selinux_state *state,
const char *fstype, char *name, u16 sclass,
u32 *sid);
#ifdef CONFIG_NETLABEL
int security_netlbl_secattr_to_sid(struct selinux_state *state,
struct netlbl_lsm_secattr *secattr,
u32 *sid);
int security_netlbl_sid_to_secattr(struct selinux_state *state,
u32 sid,
struct netlbl_lsm_secattr *secattr);
#else
static inline int security_netlbl_secattr_to_sid(struct selinux_state *state,
struct netlbl_lsm_secattr *secattr,
u32 *sid)
{
return -EIDRM;
}
static inline int security_netlbl_sid_to_secattr(struct selinux_state *state,
u32 sid,
struct netlbl_lsm_secattr *secattr)
{
return -ENOENT;
}
#endif /* CONFIG_NETLABEL */
const char *security_get_initial_sid_context(u32 sid);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
/*
* status notifier using mmap interface
*/
extern struct page *selinux_kernel_status_page(struct selinux_state *state);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
#define SELINUX_KERNEL_STATUS_VERSION 1
struct selinux_kernel_status {
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
u32 version; /* version number of thie structure */
u32 sequence; /* sequence number of seqlock logic */
u32 enforcing; /* current setting of enforcing mode */
u32 policyload; /* times of policy reloaded */
u32 deny_unknown; /* current setting of deny_unknown */
/*
* The version > 0 supports above members.
*/
} __packed;
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
extern void selinux_status_update_setenforce(struct selinux_state *state,
int enforcing);
extern void selinux_status_update_policyload(struct selinux_state *state,
int seqno);
extern void selinux_complete_init(void);
extern int selinux_disable(struct selinux_state *state);
extern void exit_sel_fs(void);
extern struct path selinux_null;
extern struct vfsmount *selinuxfs_mount;
extern void selnl_notify_setenforce(int val);
extern void selnl_notify_policyload(u32 seqno);
extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm);
selinux: fast status update interface (/selinux/status) This patch provides a new /selinux/status entry which allows applications read-only mmap(2). This region reflects selinux_kernel_status structure in kernel space. struct selinux_kernel_status { u32 length; /* length of this structure */ u32 sequence; /* sequence number of seqlock logic */ u32 enforcing; /* current setting of enforcing mode */ u32 policyload; /* times of policy reloaded */ u32 deny_unknown; /* current setting of deny_unknown */ }; When userspace object manager caches access control decisions provided by SELinux, it needs to invalidate the cache on policy reload and setenforce to keep consistency. However, the applications need to check the kernel state for each accesses on userspace avc, or launch a background worker process. In heuristic, frequency of invalidation is much less than frequency of making access control decision, so it is annoying to invoke a system call to check we don't need to invalidate the userspace cache. If we can use a background worker thread, it allows to receive invalidation messages from the kernel. But it requires us an invasive coding toward the base application in some cases; E.g, when we provide a feature performing with SELinux as a plugin module, it is unwelcome manner to launch its own worker thread from the module. If we could map /selinux/status to process memory space, application can know updates of selinux status; policy reload or setenforce. A typical application checks selinux_kernel_status::sequence when it tries to reference userspace avc. If it was changed from the last time when it checked userspace avc, it means something was updated in the kernel space. Then, the application can reset userspace avc or update current enforcing mode, without any system call invocations. This sequence number is updated according to the seqlock logic, so we need to wait for a while if it is odd number. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Acked-by: Eric Paris <eparis@redhat.com> -- security/selinux/include/security.h | 21 ++++++ security/selinux/selinuxfs.c | 56 +++++++++++++++ security/selinux/ss/Makefile | 2 +- security/selinux/ss/services.c | 3 + security/selinux/ss/status.c | 129 +++++++++++++++++++++++++++++++++++ 5 files changed, 210 insertions(+), 1 deletions(-) Signed-off-by: James Morris <jmorris@namei.org>
2010-09-14 17:28:39 +08:00
extern void avtab_cache_init(void);
extern void ebitmap_cache_init(void);
extern void hashtab_cache_init(void);
#endif /* _SELINUX_SECURITY_H_ */