AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
c386cff1bf
kernel_optimize_test/arch/ia64/Kconfig

712 lines
18 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "IA-64 Linux Kernel Configuration"
source "init/Kconfig"
container freezer: implement freezer cgroup subsystem This patch implements a new freezer subsystem in the control groups framework. It provides a way to stop and resume execution of all tasks in a cgroup by writing in the cgroup filesystem. The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "RUNNING" will unfreeze the tasks in the cgroup. Reading will return the current state. * Examples of usage : # mkdir /containers/freezer # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks to get status of the freezer subsystem : # cat /containers/0/freezer.state RUNNING to freeze all tasks in the container : # echo FROZEN > /containers/0/freezer.state # cat /containers/0/freezer.state FREEZING # cat /containers/0/freezer.state FROZEN to unfreeze all tasks in the container : # echo RUNNING > /containers/0/freezer.state # cat /containers/0/freezer.state RUNNING This is the basic mechanism which should do the right thing for user space task in a simple scenario. It's important to note that freezing can be incomplete. In that case we return EBUSY. This means that some tasks in the cgroup are busy doing something that prevents us from completely freezing the cgroup at this time. After EBUSY, the cgroup will remain partially frozen -- reflected by freezer.state reporting "FREEZING" when read. The state will remain "FREEZING" until one of these things happens: 1) Userspace cancels the freezing operation by writing "RUNNING" to the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal and returns EIO) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: export thaw_process] Signed-off-by: Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Matt Helsley <matthltc@us.ibm.com> Acked-by: Serge E. Hallyn <serue@us.ibm.com> Tested-by: Matt Helsley <matthltc@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 11:27:21 +08:00
source "kernel/Kconfig.freezer"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
menu "Processor type and features"
config IA64
bool
[IA64] fix ACPI Kconfig issues All IA64 systems except IA64_HP_SIM include ACPI and PCI. So prevent IA64 Kconfigs that try to do irritating things like building PCI without building ACPI. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-26 13:38:53 +08:00
select PCI if (!IA64_HP_SIM)
select ACPI if (!IA64_HP_SIM)
ACPI: IA64: fix allnoconfig build The evils of Kconfig's select bite us once again... ia64/Kconfig selects ACPI, which depends on PM. But select ignores dependencies, allnoconfig chooses CONFIG_PM=n, and thus the menu of sub-options under ACPI vanish, which breaks the build. Manually select PM along with ACPI for now. Some day, we should delete them both, or fix select. Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-03-17 10:00:43 +08:00
select PM if (!IA64_HP_SIM)
msi: introduce ARCH_SUPPORTS_MSI Kconfig option (rev2) Allows architectures to advertise that they support MSI rather than listing each architecture as a PCI_MSI dependency. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-18 16:46:20 +08:00
select ARCH_SUPPORTS_MSI
[IA64] Turn on CONFIG_HAVE_UNSTABLE_CLOCK sched_clock() on ia64 is based on ar.itc, so is never completely synchronized between cpus. On some platforms (e.g. certain models of SGI Altix) it may be running at radically different frequencies. Based on a patch from Dimitri Sivanich which set this just for SN2 && GENERIC kernels ... it is needed for all ia64 machines. Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-01-16 02:29:17 +08:00
select HAVE_UNSTABLE_SCHED_CLOCK
ide: introduce HAVE_IDE To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09 17:46:40 +08:00
select HAVE_IDE
Add HAVE_OPROFILE Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config ARCH_SUPPORTS_KPROBES def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... Changelog : - Moving to HAVE_*. - Add AVR32 oprofile. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 04:10:34 +08:00
select HAVE_OPROFILE
Add HAVE_KPROBES Linus: On the per-architecture side, I do think it would be better to *not* have internal architecture knowledge in a generic file, and as such a line like depends on X86_32 || IA64 || PPC || S390 || SPARC64 || X86_64 || AVR32 really shouldn't exist in a file like kernel/Kconfig.instrumentation. It would be much better to do depends on ARCH_SUPPORTS_KPROBES in that generic file, and then architectures that do support it would just have a bool ARCH_SUPPORTS_KPROBES default y in *their* architecture files. That would seem to be much more logical, and is readable both for arch maintainers *and* for people who have no clue - and don't care - about which architecture is supposed to support which interface... Changelog: Actually, I know I gave this as the magic incantation, but now that I see it, I realize that I should have told you to just use config KPROBES_SUPPORT def_bool y instead, which is a bit denser. We seem to use both kinds of syntax for these things, but this is really what "def_bool" is there for... - Use HAVE_KPROBES - Use a select - Yet another update : Moving to HAVE_* now. - Update ARM for kprobes support. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Jeff Dike <jdike@addtoit.com> Cc: David Howells <dhowells@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03 04:10:35 +08:00
select HAVE_KPROBES
Kprobes: indicate kretprobe support in Kconfig Add CONFIG_HAVE_KRETPROBES to the arch/<arch>/Kconfig file for relevant architectures with kprobes support. This facilitates easy handling of in-kernel modules (like samples/kprobes/kretprobe_example.c) that depend on kretprobes being present in the kernel. Thanks to Sam Ravnborg for helping make the patch more lean. Per Mathieu's suggestion, added CONFIG_KRETPROBES and fixed up dependencies. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-05 06:28:37 +08:00
select HAVE_KRETPROBES
ftrace, ia64: IA64 dynamic ftrace support IA64 dynamic ftrace support. The original _mcount stub for each function is like: alloc r40=ar.pfs,12,8,0 mov r43=r0;; mov r42=b0 mov r41=r1 nop.i 0x0 br.call.sptk.many b0 = _mcount;; The patch convert it to below for nop: [MII] nop.m 0x0 mov r3=ip nop.i 0x0 [MLX] nop.m 0x0 nop.x 0x0;; This isn't completely nop, as there is one instuction 'mov r3=ip', but it should be light and harmless for code follow it. And below is for call [MII] nop.m 0x0 mov r3=ip nop.i 0x0 [MLX] nop.m 0x0 brl.many .;; In this way, only one instruction is changed to convert code between nop and call. This should meet dyn-ftrace's requirement. But this requires CPU support brl instruction, so dyn-ftrace isn't supported for old Itanium system. Assume there are quite few such old system running. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 11:29:49 +08:00
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
ftrace, ia64: IA64 static ftrace support IA64 ftrace suppport. In IA64, below code will be added in each function if -pg is enabled. alloc r40=ar.pfs,12,8,0 mov r43=r0;; mov r42=b0 mov r41=r1 nop.i 0x0 br.call.sptk.many b0 = _mcount;; Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-09 11:29:46 +08:00
select HAVE_FUNCTION_TRACER
dma: add dma_*map*_attrs() interfaces Introduce new interfaces, dma_*map*_attrs(), for passing architecture-specific attributes when memory is mapped and unmapped for DMA. Give the interfaces default implementations which ignore attributes. Also introduce the dma_{set|get}_attr() interfaces for setting and retrieving individual attributes. Define one attribute, DMA_ATTR_WRITE_BARRIER, in anticipation of its use by ia64/sn. Select whether architectures implement arch-specific versions of the dma_*map*_attrs() interfaces via HAVE_DMA_ATTRS in Kconfig. [markn@au1.ibm.com: dma_{set,get}_attr() have to be static inline] Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 16:00:30 +08:00
select HAVE_DMA_ATTRS
KVM: ia64: Enable kvm build for ia64 Update the related Makefile and KConfig for kvm build Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-28 14:58:47 +08:00
select HAVE_KVM
[IA64] utrace Enable trace hook config Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-02 04:57:14 +08:00
select HAVE_ARCH_TRACEHOOK
dma-mapping: ia64: add CONFIG_DMA_API_DEBUG support Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Joerg Roedel <joerg.roedel@amd.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc; "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 07:28:14 +08:00
select HAVE_DMA_API_DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
the 32-bit X86 line. The IA-64 Linux project has a home
page at <http://www.linuxia64.org/> and a mailing list at
<linux-ia64@vger.kernel.org>.
config 64BIT
bool
ATA convert GSI to irq on ia64 If an ATA drive uses legacy mode, ata driver will choose 14 and 15 as the fixed irq number. On ia64 platform, such numbers are GSI and should be converted to irq vector. Below patch against kernel 2.6.20 fixes it. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 11:29:51 +08:00
select ATA_NONSTANDARD if ATA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default y
[PATCH] optional ZONE_DMA: introduce CONFIG_ZONE_DMA This patch simply defines CONFIG_ZONE_DMA for all arches. We later do special things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work without ZONE_DMA. CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture handles ISA DMA. First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch needs ZONE_DMA because ISA DMA devices are supported. We can catch this in mm/Kconfig and do not need to modify arch code. Second, arches may use ZONE_DMA in an unknown way. We set CONFIG_ZONE_DMA for all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards compatibility. The arches may later undefine ZONE_DMA if their arch code has been verified to not depend on ZONE_DMA. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:43:09 +08:00
config ZONE_DMA
[PATCH] optional ZONE_DMA: optional ZONE_DMA for ia64 ZONE_DMA less operation for IA64 SGI platform Disable ZONE_DMA for SGI SN2. All memory is addressable by all devices and we do not need any special memory pool. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:43:11 +08:00
def_bool y
depends on !IA64_SGI_SN2
[PATCH] optional ZONE_DMA: introduce CONFIG_ZONE_DMA This patch simply defines CONFIG_ZONE_DMA for all arches. We later do special things with CONFIG_ZONE_DMA after the VM and an arch are prepared to work without ZONE_DMA. CONFIG_ZONE_DMA can be defined in two ways depending on how an architecture handles ISA DMA. First if CONFIG_GENERIC_ISA_DMA is set by the arch then we know that the arch needs ZONE_DMA because ISA DMA devices are supported. We can catch this in mm/Kconfig and do not need to modify arch code. Second, arches may use ZONE_DMA in an unknown way. We set CONFIG_ZONE_DMA for all arches that do not set CONFIG_GENERIC_ISA_DMA in order to insure backwards compatibility. The arches may later undefine ZONE_DMA if their arch code has been verified to not depend on ZONE_DMA. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10 17:43:09 +08:00
[IA64] Quicklist support for IA64 IA64 is the origin of the quicklist implementation. So cut out the pieces that are now in core code and modify the functions called. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-05-11 13:42:53 +08:00
config QUICKLIST
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config MMU
bool
default y
[PATCH] swiotlb: move from arch/ia64/lib/ to lib/ The swiotlb implementation is shared by both IA-64 and EM64T. However, the source itself lives under arch/ia64. This patch moves swiotlb.c from arch/ia64/lib to lib/ and fixes-up the appropriate Makefile and Kconfig files. No actual changes are made to swiotlb.c. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-30 05:42:42 +08:00
config SWIOTLB
bool
swiotlb: use iommu_is_span_boundary helper function iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs (commit 3715863aa142c4f4c5208f5f3e5e9bac06006d2f). SWIOTLB can use it instead of the homegrown function. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 15:59:36 +08:00
config IOMMU_HELPER
bool
spinlock: lockbreak cleanup The break_lock data structure and code for spinlocks is quite nasty. Not only does it double the size of a spinlock but it changes locking to a potentially less optimal trylock. Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a __raw_spin_is_contended that uses the lock data itself to determine whether there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is not set. Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to decouple it from the spinlock implementation, and make it typesafe (rwlocks do not have any need_lockbreak sites -- why do they even get bloated up with that break_lock then?). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 20:31:20 +08:00
config GENERIC_LOCKBREAK
bool
default y
depends on SMP && PREEMPT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config RWSEM_XCHGADD_ALGORITHM
bool
default y
Do not depend on MAX_ORDER when grouping pages by mobility Currently mobility grouping works at the MAX_ORDER_NR_PAGES level. This makes sense for the majority of users where this is also the huge page size. However, on platforms like ia64 where the huge page size is runtime configurable it is desirable to group at a lower order. On x86_64 and occasionally on x86, the hugepage size may not always be MAX_ORDER_NR_PAGES. This patch groups pages together based on the value of HUGETLB_PAGE_ORDER. It uses a compile-time constant if possible and a variable where the huge page size is runtime configurable. It is assumed that grouping should be done at the lowest sensible order and that the user would not want to override this. If this is not true, page_block order could be forced to a variable initialised via a boot-time kernel parameter. One potential issue with this patch is that IA64 now parses hugepagesz with early_param() instead of __setup(). __setup() is called after the memory allocator has been initialised and the pageblock bitmaps already setup. In tests on one IA64 there did not seem to be any problem with using early_param() and in fact may be more correct as it guarantees the parameter is handled before the parsing of hugepages=. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:26:01 +08:00
config HUGETLB_PAGE_SIZE_VARIABLE
bool
depends on HUGETLB_PAGE
default y
[PATCH] bitops: ia64: use generic bitops - remove generic_fls64() - remove find_{next,first}{,_zero}_bit() - remove ext2_{set,clear,test,find_first_zero,find_next_zero}_bit() - remove minix_{test,set,test_and_clear,test,find_first_zero}_bit() - remove sched_find_first_bit() Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 17:39:25 +08:00
config GENERIC_FIND_NEXT_BIT
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config GENERIC_CALIBRATE_DELAY
bool
default y
[IA64] Convert to generic timekeeping/clocksource This is a merge of Peter Keilty's initial patch (which was revived by Bob Picco) for this with Hidetoshi Seto's fixes and scaling improvements. Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-21 02:22:30 +08:00
config GENERIC_TIME
bool
default y
config GENERIC_TIME_VSYSCALL
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bool
default y
percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA Change: config ARCH_SETS_UP_PER_CPU_AREA to: config HAVE_SETUP_PER_CPU_AREA Cc: Andi Kleen <ak@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: linuxppc-dev@ozlabs.org Cc: linux-ia64@vger.kernel.org Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-31 06:27:58 +08:00
config HAVE_SETUP_PER_CPU_AREA
percpu: use a kconfig variable to signal arch specific percpu setup The use of the __GENERIC_PERCPU is a bit problematic since arches may want to run their own percpu setup while using the generic percpu definitions. Replace it through a kconfig variable. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-30 20:32:51 +08:00
def_bool y
[PATCH] ia64: use i386 dmi_scan.c Enable DMI table parsing on ia64. Andi Kleen has a patch in his x86_64 tree which enables the use of i386 dmi_scan.c on x86_64. dmi_scan.c functions are being used by the drivers/char/ipmi/ipmi_si_intf.c driver for autodetecting the ports or memory spaces where the IPMI controllers may be found. This patch adds equivalent changes for ia64 as to what is in the x86_64 tree. In addition, I reworked the DMI detection, such that on EFI-capable systems, it uses the efi.smbios pointer to find the table, rather than brute-force searching from 0xF0000. On non-EFI systems, it continues the brute-force search. My test system, an Intel S870BN4 'Tiger4', aka Dell PowerEdge 7250, with latest BIOS, does not list the IPMI controller in the ACPI namespace, nor does it have an ACPI SPMI table. Also note, currently shipping Dell x8xx EM64T servers don't have these either, so DMI is the only method for obtaining the address of the IPMI controller. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 17:37:03 +08:00
config DMI
bool
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config EFI
bool
default y
config GENERIC_IOMAP
bool
default y
sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER Impact: cleanup, change .config option name We had this ugly config name for a long time for hysteric raisons. Rename it to a saner name. We still cannot get rid of it completely, until /proc/<pid>/stack usage replaces WCHAN usage for good. We'll be able to do that in the v2.6.29/v2.6.30 timeframe. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11 16:05:16 +08:00
config SCHED_OMIT_FRAME_POINTER
[PATCH] ppc64: remove hidden -fno-omit-frame-pointer for schedule.c While looking at code generated by gcc4.0 I noticed some functions still had frame pointers, even after we stopped ppc64 from defining CONFIG_FRAME_POINTER. It turns out kernel/Makefile hardwires -fno-omit-frame-pointer on when compiling schedule.c. Create CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER and define it on architectures that dont require frame pointers in sched.c code. (akpm: blame me for the name) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-06 07:15:11 +08:00
bool
default y
[PATCH] ia64 uncached alloc This patch contains the ia64 uncached page allocator and the generic allocator (genalloc). The uncached allocator was formerly part of the SN2 mspec driver but there are several other users of it so it has been split off from the driver. The generic allocator can be used by device driver to manage special memory etc. The generic allocator is based on the allocator from the sym53c8xx_2 driver. Various users on ia64 needs uncached memory. The SGI SN architecture requires it for inter-partition communication between partitions within a large NUMA cluster. The specific user for this is the XPC code. Another application is large MPI style applications which use it for synchronization, on SN this can be done using special 'fetchop' operations but it also benefits non SN hardware which may use regular uncached memory for this purpose. Performance of doing this through uncached vs cached memory is pretty substantial. This is handled by the mspec driver which I will push out in a seperate patch. Rather than creating a specific allocator for just uncached memory I came up with genalloc which is a generic purpose allocator that can be used by device drivers and other subsystems as they please. For instance to handle onboard device memory. It was derived from the sym53c7xx_2 driver's allocator which is also an example of a potential user (I am refraining from modifying sym2 right now as it seems to have been under fairly heavy development recently). On ia64 memory has various properties within a granule, ie. it isn't safe to access memory as uncached within the same granule as currently has memory accessed in cached mode. The regular system therefore doesn't utilize memory in the lower granules which is mixed in with device PAL code etc. The uncached driver walks the EFI memmap and pulls out the spill uncached pages and sticks them into the uncached pool. Only after these chunks have been utilized, will it start converting regular cached memory into uncached memory. Hence the reason for the EFI related code additions. Signed-off-by: Jes Sorensen <jes@wildopensource.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 08:15:02 +08:00
config IA64_UNCACHED_ALLOCATOR
bool
select GENERIC_ALLOCATOR
[PATCH] syscall class hookup for all normal targets Take default arch/*/kernel/audit.c to lib/, have those with special needs (== biarch) define AUDIT_ARCH in their Kconfig. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-12 15:04:40 +08:00
config AUDIT_ARCH
bool
default y
ia64/pv_ops: update Kconfig for paravirtualized guest and xen. introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for paravirtualized guest. introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:18:11 +08:00
menuconfig PARAVIRT_GUEST
bool "Paravirtualized guest support"
help
Say Y here to get to see options related to running Linux under
various hypervisors. This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if PARAVIRT_GUEST
config PARAVIRT
bool "Enable paravirtualization code"
depends on PARAVIRT_GUEST
default y
bool
default y
help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
source "arch/ia64/xen/Kconfig"
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
choice
prompt "System type"
default IA64_GENERIC
config IA64_GENERIC
bool "generic"
select NUMA
select ACPI_NUMA
[IA64] Enable SWIOTLB only when needed Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-03 17:26:21 +08:00
select SWIOTLB
[IA64] Add Variable Page Size and IA64 Support in Intel IOMMU The patch contains Intel IOMMU IA64 specific code. It defines new machvec dig_vtd, hooks for IOMMU, DMAR table detection, cache line flush function, etc. For a generic kernel with CONFIG_DMAR=y, if Intel IOMMU is detected, dig_vtd is used for machinve vector. Otherwise, kernel falls back to dig machine vector. Kernel parameter "machvec=dig" or "intel_iommu=off" can be used to force kernel to boot dig machine vector. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-18 03:14:13 +08:00
select PCI_MSI
[IA64] Build VT-D iommu support into generic kernel Now that all the ia64 mmu pieces are in the tree we can build support into the generic kernel. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-04 05:54:52 +08:00
select DMAR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
a kernel for your specific system, it will be faster and smaller.
generic For any supported IA-64 system
DIG-compliant For DIG ("Developer's Interface Guide") compliant systems
[IA64] Add Variable Page Size and IA64 Support in Intel IOMMU The patch contains Intel IOMMU IA64 specific code. It defines new machvec dig_vtd, hooks for IOMMU, DMAR table detection, cache line flush function, etc. For a generic kernel with CONFIG_DMAR=y, if Intel IOMMU is detected, dig_vtd is used for machinve vector. Otherwise, kernel falls back to dig machine vector. Kernel parameter "machvec=dig" or "intel_iommu=off" can be used to force kernel to boot dig machine vector. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-18 03:14:13 +08:00
DIG+Intel+IOMMU For DIG systems with Intel IOMMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
SGI-SN2 For SGI Altix systems
[IA64] machvec support for SGI UV platform This patch adds the basic IA64 machvec infrastructure to support the SGI "UV" platform. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-07 04:18:57 +08:00
SGI-UV For SGI UV systems
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
ia64/pv_ops: update Kconfig for paravirtualized guest and xen. introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for paravirtualized guest. introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:18:11 +08:00
Xen-domU For xen domU system
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
If you don't know what to do, choose "generic".
config IA64_DIG
bool "DIG-compliant"
[IA64] Enable SWIOTLB only when needed Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-03 17:26:21 +08:00
select SWIOTLB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IA64] Add Variable Page Size and IA64 Support in Intel IOMMU The patch contains Intel IOMMU IA64 specific code. It defines new machvec dig_vtd, hooks for IOMMU, DMAR table detection, cache line flush function, etc. For a generic kernel with CONFIG_DMAR=y, if Intel IOMMU is detected, dig_vtd is used for machinve vector. Otherwise, kernel falls back to dig machine vector. Kernel parameter "machvec=dig" or "intel_iommu=off" can be used to force kernel to boot dig machine vector. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-18 03:14:13 +08:00
config IA64_DIG_VTD
bool "DIG+Intel+IOMMU"
select DMAR
select PCI_MSI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config IA64_HP_ZX1
bool "HP-zx1/sx1000"
help
Build a kernel that runs on HP zx1 and sx1000 systems. This adds
support for the HP I/O MMU.
config IA64_HP_ZX1_SWIOTLB
bool "HP-zx1/sx1000 with software I/O TLB"
[IA64] Enable SWIOTLB only when needed Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-03 17:26:21 +08:00
select SWIOTLB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Build a kernel that runs on HP zx1 and sx1000 systems even when they
have broken PCI devices which cannot DMA to full 32 bits. Apart
from support for the HP I/O MMU, this includes support for the software
I/O TLB, which allows supporting the broken devices at the expense of
wasting some kernel memory (about 2MB by default).
config IA64_SGI_SN2
bool "SGI-SN2"
[IA64] CONFIG_SGI_SN2 - auto select NUMA and ACPI_NUMA Auto select CONFIG_NUMA and CONFIG_ACPI_NUMA when picking SN2, similar to how they are selected automatically for CONFIG_IA64_GENERIC. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-11 22:10:19 +08:00
select NUMA
select ACPI_NUMA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
Selecting this option will optimize the kernel for use on sn2 based
systems, but the resulting kernel binary will not run on other
types of ia64 systems. If you have an SGI Altix system, it's safe
to select this option. If in doubt, select ia64 generic support
instead.
[IA64] Eliminate trailing backquote in IA64_SGI_UV Eliminate trailing backquote in IA64_SGI_UV config. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-07-31 20:52:50 +08:00
config IA64_SGI_UV
bool "SGI-UV"
[IA64] machvec support for SGI UV platform This patch adds the basic IA64 machvec infrastructure to support the SGI "UV" platform. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-05-07 04:18:57 +08:00
select NUMA
select ACPI_NUMA
select SWIOTLB
help
Selecting this option will optimize the kernel for use on UV based
systems, but the resulting kernel binary will not run on other
types of ia64 systems. If you have an SGI UV system, it's safe
to select this option. If in doubt, select ia64 generic support
instead.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config IA64_HP_SIM
bool "Ski-simulator"
[IA64] Enable SWIOTLB only when needed Don't force CONFIG_SWIOTLB on when not actually needed (i.e. HP_ZX1 and SGI_SN2). Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-01-03 17:26:21 +08:00
select SWIOTLB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ia64/pv_ops: update Kconfig for paravirtualized guest and xen. introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for paravirtualized guest. introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:18:11 +08:00
config IA64_XEN_GUEST
bool "Xen guest"
[IA64] fixes configs and add default config for ia64 xen domU This patch fixes xen related Kconfigs and add default config file for ia64 xen domU. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-01-16 11:17:30 +08:00
select SWIOTLB
ia64/pv_ops: update Kconfig for paravirtualized guest and xen. introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for paravirtualized guest. introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:18:11 +08:00
depends on XEN
[IA64] fixes configs and add default config for ia64 xen domU This patch fixes xen related Kconfigs and add default config file for ia64 xen domU. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-01-16 11:17:30 +08:00
help
Build a kernel that runs on Xen guest domain. At this moment only
16KB page size in supported.
ia64/pv_ops: update Kconfig for paravirtualized guest and xen. introduce CONFIG_PARAVIRT_GUEST, CONFIG_PARAVIRT for paravirtualized guest. introduce CONFIG_XEN, CONFIG_IA64_XEN_GUEST for xen. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:18:11 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endchoice
choice
prompt "Processor type"
default ITANIUM
config ITANIUM
bool "Itanium"
help
Select your IA-64 processor type. The default is Itanium.
This choice is safe for all IA-64 systems, but may not perform
optimally on systems with, say, Itanium 2 or newer processors.
config MCKINLEY
bool "Itanium 2"
help
Select this to configure for an Itanium 2 (McKinley) processor.
endchoice
choice
prompt "Kernel page size"
default IA64_PAGE_SIZE_16KB
config IA64_PAGE_SIZE_4KB
bool "4KB"
help
This lets you select the page size of the kernel. For best IA-64
performance, a page size of 8KB or 16KB is recommended. For best
IA-32 compatibility, a page size of 4KB should be selected (the vast
majority of IA-32 binaries work perfectly fine with a larger page
size). For Itanium 2 or newer systems, a page size of 64KB can also
be selected.
4KB For best IA-32 compatibility
8KB For best IA-64 performance
16KB For best IA-64 performance
64KB Requires Itanium 2 or newer processor.
If you don't know what to do, choose 16KB.
config IA64_PAGE_SIZE_8KB
bool "8KB"
config IA64_PAGE_SIZE_16KB
bool "16KB"
config IA64_PAGE_SIZE_64KB
depends on !ITANIUM
bool "64KB"
endchoice
[IA64] 4-level page tables This patch introduces 4-level page tables to ia64. I have run some benchmarks and found nothing interesting. Performance has consistently fallen within the noise range. It also introduces a config option (setting the default to 3 levels). The config option prevents having 4 level page tables with 64k base page size. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-11 23:35:43 +08:00
choice
prompt "Page Table Levels"
default PGTABLE_3
config PGTABLE_3
bool "3 Levels"
config PGTABLE_4
depends on !IA64_PAGE_SIZE_64KB
bool "4 Levels"
endchoice
[IA64] Fix build for sim_defconfig Commit bdc807871d58285737d50dc6163d0feb72cb0dc2 broke the build for this config because the sim_defconfig selects CONFIG_HZ=250 but include/asm-ia64/param.h has an ifdef for the simulator to force HZ to 32. So we ended up with a kernel/timeconst.h set for HZ=250 ... which then failed the check for the right HZ value and died with: Drop the #ifdef magic from param.h and make force CONFIG_HZ=32 directly for the simulator. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-12 05:23:46 +08:00
if IA64_HP_SIM
config HZ
default 32
endif
if !IA64_HP_SIM
[PATCH] ia64: Selectable Timer Interrupt Frequency It allows a selectable timer interrupt frequency of 100, 250 and 1000 HZ. Reducing the timer frequency may have important performance benefits on large systems. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:08:27 +08:00
source kernel/Kconfig.hz
[IA64] Fix build for sim_defconfig Commit bdc807871d58285737d50dc6163d0feb72cb0dc2 broke the build for this config because the sim_defconfig selects CONFIG_HZ=250 but include/asm-ia64/param.h has an ifdef for the simulator to force HZ to 32. So we ended up with a kernel/timeconst.h set for HZ=250 ... which then failed the check for the right HZ value and died with: Drop the #ifdef magic from param.h and make force CONFIG_HZ=32 directly for the simulator. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-12 05:23:46 +08:00
endif
[PATCH] ia64: Selectable Timer Interrupt Frequency It allows a selectable timer interrupt frequency of 100, 250 and 1000 HZ. Reducing the timer frequency may have important performance benefits on large systems. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:08:27 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config IA64_BRL_EMU
bool
depends on ITANIUM
default y
# align cache-sensitive data to 128 bytes
config IA64_L1_CACHE_SHIFT
int
default "7" if MCKINLEY
default "6" if ITANIUM
config IA64_CYCLONE
bool "Cyclone (EXA) Time Source support"
help
Say Y here to enable support for IBM EXA Cyclone time source.
If you're unsure, answer N.
config IOSAPIC
bool
depends on !IA64_HP_SIM
default y
config FORCE_MAX_ZONEORDER
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE
range 11 17 if !HUGETLB_PAGE
default "17" if HUGETLB_PAGE
default "11"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IA64] VIRT_CPU_ACCOUNTING (accurate cpu time accounting) This patch implements VIRT_CPU_ACCOUNTING for ia64, which enable us to use more accurate cpu time accounting. The VIRT_CPU_ACCOUNTING is an item of kernel config, which s390 and powerpc arch have. By turning this config on, these archs change the mechanism of cpu time accounting from tick-sampling based one to state-transition based one. The state-transition based accounting is done by checking time (cycle counter in processor) at every state-transition point, such as entrance/exit of kernel, interrupt, softirq etc. The difference between point to point is the actual time consumed during in the state. There is no doubt about that this value is more accurate than that of tick-sampling based accounting. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-01-29 13:27:30 +08:00
config VIRT_CPU_ACCOUNTING
bool "Deterministic task and CPU time accounting"
default n
help
Select this option to enable more accurate task and CPU time
accounting. This is done by reading a CPU counter on each
kernel entry and exit and on transitions within the kernel
between system, softirq and hardirq state, so there is a
small performance impact.
If in doubt, say N here.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config SMP
bool "Symmetric multi-processing support"
ia64: convert to generic helpers for IPI function calls This converts ia64 to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 17:22:30 +08:00
select USE_GENERIC_SMP_HELPERS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
If you say N here, the kernel will run on single and multiprocessor
systems, but will use only one CPU of a multiprocessor system. If
you say Y here, the kernel will run on many, but not all,
single processor systems. On a single processor system, the kernel
will run faster if you say N here.
remove Documentation/smp.txt After seeing the filename I'd have expected something about the implementation of SMP in the Linux kernel - not some notes on kernel configuration and building trivialities noone would search at this place. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alan Cox <alan@redhat.com>
2008-02-03 21:50:21 +08:00
See also the SMP-HOWTO available at
<http://www.tldp.org/docs.html#howto>.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
If you don't know what to do here, say N.
config NR_CPUS
[IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096 ia64 has compiled with NR_CPUS=4096 for a couple releases, just forgot to update Kconfig to allow it. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-03 02:29:24 +08:00
int "Maximum number of CPUs (2-4096)"
range 2 4096
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
depends on SMP
[IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096 ia64 has compiled with NR_CPUS=4096 for a couple releases, just forgot to update Kconfig to allow it. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-03 02:29:24 +08:00
default "4096"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
You should set this to the number of CPUs in your system, but
keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
only use 2 CPUs on a >2 CPU system. Setting this to a value larger
than 64 will cause the use of a CPU mask array, causing a small
performance hit.
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && EXPERIMENTAL
select HOTPLUG
default n
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu/cpu#.
Say N if you want to disable CPU hotplug.
[PATCH] solve config broken: undefined reference to `online_page' Memory hotplug code of i386 adds memory to only highmem. So, if CONFIG_HIGHMEM is not set, CONFIG_MEMORY_HOTPLUG shouldn't be set. Otherwise, it causes compile error. In addition, many architecture can't use memory hotplug feature yet. So, I introduce CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 17:24:27 +08:00
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
memory unplug: page offline Logic. - set all pages in [start,end) as isolated migration-type. by this, all free pages in the range will be not-for-use. - Migrate all LRU pages in the range. - Test all pages in the range's refcnt is zero or not. Todo: - allocate migration destination page from better area. - confirm page_count(page)== 0 && PageReserved(page) page is safe to be freed.. (I don't like this kind of page but.. - Find out pages which cannot be migrated. - more running tests. - Use reclaim for unplugging other memory type area. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:26:12 +08:00
config ARCH_ENABLE_MEMORY_HOTREMOVE
def_bool y
[IA64] Add config SCHED_SMT Now that we have MC/MT detection patches in, appended patch allows us to configure MT scheduler optimizations. For now, we will this option off by default. There is some discussion going on lkml about setting up sched-domains which are absolutely needed (like for example, we shouldn't setup SMT domain for non MT processors). Once that patch goes in, we can enable this option by default. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-06 09:05:00 +08:00
config SCHED_SMT
bool "SMT scheduler support"
depends on SMP
help
Improves the CPU scheduler's decision making when dealing with
Intel IA64 chips with MultiThreading at a cost of slightly increased
overhead in some places. If unsure say N here.
[IA64] support for cpu0 removal here is the BSP removal support for IA64. Its pretty much the same thing that was released a while back, but has your feedback incorporated. - Removed CONFIG_BSP_REMOVE_WORKAROUND and associated cmdline param - Fixed compile issue with sn2/zx1 due to a undefined fix_b0_for_bsp - some formatting nits (whitespace etc) This has been tested on tiger and long back by alex on hp systems as well. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-12 06:32:40 +08:00
config PERMIT_BSP_REMOVE
bool "Support removal of Bootstrap Processor"
depends on HOTPLUG_CPU
default n
---help---
Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
support.
config FORCE_CPEI_RETARGET
bool "Force assumption that CPEI can be re-targetted"
depends on PERMIT_BSP_REMOVE
default n
---help---
Say Y if you need to force the assumption that CPEI can be re-targetted to
any cpu in the system. This hint is available via ACPI 3.0 specifications.
Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
This option it useful to enable this feature on older BIOS's as well.
You can also enable this by using boot command line option force_cpei=1.
[IA64] Include Kconfig.preempt arch/ia64/Kconfig failed to include kernel/Kconfig.preempt that meant it did not support PREEMPT_VOLUNTARY and PREEMPT_BKL (inadvertently). This was recently noticed when the newly-added PREEMPT_NOTIFIERS in Kconfig.preempt that was "select"ed from drivers/kvm/Kconfig (therefore) started giving bogus warnings ('select' used by config symbol 'KVM' refers to undefined symbol 'PREEMPT_NOTIFIERS') on ia64 builds. So let's remove the open-coded definition of CONFIG_PREEMPT in arch/ia64/Kconfig and replace it with just including Kconfig.preempt instead, like the other archs do. Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-08-14 02:11:45 +08:00
source "kernel/Kconfig.preempt"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] make each arch use mm/Kconfig For all architectures, this just means that you'll see a "Memory Model" choice in your architecture menu. For those that implement DISCONTIGMEM, you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool y" and make your users select DISCONTIGMEM right out of the new choice menu. The only disadvantage might be if you have some specific things that you need in your help option to explain something about DISCONTIGMEM. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 15:07:43 +08:00
source "mm/Kconfig"
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
config ARCH_SELECT_MEMORY_MODEL
def_bool y
config ARCH_DISCONTIGMEM_ENABLE
def_bool y
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_FLATMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
IA64: SPARSEMEM_VMEMMAP 16K page size support Equip IA64 sparsemem with a virtual memmap. This is similar to the existing CONFIG_VIRTUAL_MEM_MAP functionality for DISCONTIGMEM. It uses a PAGE_SIZE mapping. This is provided as a minimally intrusive solution. We split the 128TB VMALLOC area into two 64TB areas and use one for the virtual memmap. This should replace CONFIG_VIRTUAL_MEM_MAP long term. [apw@shadowen.org: convert to new helper based initialisation] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 16:24:15 +08:00
select SPARSEMEM_VMEMMAP_ENABLE
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
config ARCH_DISCONTIGMEM_DEFAULT
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
depends on ARCH_DISCONTIGMEM_ENABLE
config NUMA
bool "NUMA support"
depends on !IA64_HP_SIM && !FLATMEM
default y if IA64_SGI_SN2
[PATCH] ia64: select ACPI_NUMA if ACPI When ACPI && NUMA, pxm_to_node is used and it exists in drivers/acpi/numa.c Tony said: The patch makes sense ... if you pick both of "ACPI" and "NUMA", then you need (and should automatically be given) ACPI_NUMA too. The only open question is whether there is a better way of getting there. Perhaps with less configuration options in the first place? We are heading towards a future where so many systems will be NUMA that there would seem to be little benefit in keeping ACPI_NUMA separate from ACPI ... but perhaps we aren't quite there yet. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Len Brown <lenb@kernel.org> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-09 09:44:50 +08:00
select ACPI_NUMA if ACPI
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
Access). This option is for configuring high-end multiprocessor
server systems. If in doubt, say N.
[PATCH] Configurable NODES_SHIFT Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for each arch. Its definition is sometimes configurable. Indeed, ia64 defines 5 NODES_SHIFT values in the current git tree. But it looks a bit messy. SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has been changeable by config. Suitable node's number may be changed in the future even if it is other architecture. So, I wrote configurable node's number. This patch set defines just default value for each arch which needs multi nodes except ia64. But, it is easy to change to configurable if necessary. On ia64 the number of nodes can be already configured in generic ia64 and SN2 config. But, NODES_SHIFT is defined for DIG64 and HP'S machine too. So, I changed it so that all platforms can be configured via CONFIG_NODES_SHIFT. It would be simpler. See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2 Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 13:53:53 +08:00
config NODES_SHIFT
int "Max num nodes shift(3-10)"
range 3 10
[IA64] Increase default nodes shift to 10, nr_cpus to 1024 Change both the NODES_SHIFT and the NR_CPUS so that even big machines can boot all nodes and processors with a generic kernel. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-08-23 10:43:27 +08:00
default "10"
[PATCH] Configurable NODES_SHIFT Current implementations define NODES_SHIFT in include/asm-xxx/numnodes.h for each arch. Its definition is sometimes configurable. Indeed, ia64 defines 5 NODES_SHIFT values in the current git tree. But it looks a bit messy. SGI-SN2(ia64) system requires 1024 nodes, and the number of nodes already has been changeable by config. Suitable node's number may be changed in the future even if it is other architecture. So, I wrote configurable node's number. This patch set defines just default value for each arch which needs multi nodes except ia64. But, it is easy to change to configurable if necessary. On ia64 the number of nodes can be already configured in generic ia64 and SN2 config. But, NODES_SHIFT is defined for DIG64 and HP'S machine too. So, I changed it so that all platforms can be configured via CONFIG_NODES_SHIFT. It would be simpler. See also: http://marc.theaimsgroup.com/?l=linux-kernel&m=114358010523896&w=2 Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 13:53:53 +08:00
depends on NEED_MULTIPLE_NODES
help
This option specifies the maximum number of nodes in your SSI system.
MAX_NUMNODES will be 2^(This value).
If in doubt, use the default.
[PATCH] Have ia64 use add_active_range() and free_area_init_nodes Size zones and holes in an architecture independent manner for ia64. [bob.picco@hp.com: fix ia64 FLATMEM+VIRTUAL_MEM_MAP] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bob Picco <bob.picco@hp.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Keith Mannthey" <kmannth@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 16:49:54 +08:00
config ARCH_POPULATES_NODE_MAP
def_bool y
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent.
# VIRTUAL_MEM_MAP has been retained for historical reasons.
config VIRTUAL_MEM_MAP
bool "Virtual mem map"
depends on !SPARSEMEM
default y if !IA64_HP_SIM
help
Say Y to compile the kernel with support for a virtual mem map.
This code also only takes effect if a memory hole of greater than
1 Gb is found during boot. You must turn this option on if you
require the DISCONTIGMEM option for your machine. If you are
unsure, say Y.
config HOLES_IN_ZONE
bool
default y if VIRTUAL_MEM_MAP
config HAVE_ARCH_EARLY_PFN_TO_NID
[IA64] Build fix for __early_pfn_to_nid() undefined link error ia64 only defines __early_pfn_to_nid() for SPARSEMEM && NUMA configurations, so the recent: commit: f2dbcfa738368c8a40d4a5f0b65dc9879577cb21 mm: clean up for early_pfn_to_nid() ends up with some link problems for certain configuration files. Fix arch/ia64/Kconfig to only define HAVE_ARCH_EARLY_PFN_TO_NID in the cases where we do provide this function. Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-20 03:22:36 +08:00
def_bool NUMA && SPARSEMEM
[PATCH] V5 ia64 SPARSEMEM - Kconfig and Makefile The patch modifies the Kconfig file to introduce the new memory model options and other related SPARSEMEM changes. There is also a minor change in the Makefile. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-05 03:13:37 +08:00
[PATCH] pgdat allocation for new node add (refresh node_data[]) Refresh NODE_DATA() for generic archs. In this case, NODE_DATA(nid) == node_data[nid]. node_data[] is array of address of pgdat. So, refresh is quite simple. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:53:33 +08:00
config HAVE_ARCH_NODEDATA_EXTENSION
def_bool y
depends on NUMA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config IA32_SUPPORT
bool "Support for Linux/x86 binaries"
help
IA-64 processors can execute IA-32 (X86) instructions. By
saying Y here, the kernel will include IA-32 system call
emulation support which makes it possible to transparently
run IA-32 Linux binaries on an IA-64 Linux system.
If in doubt, say Y.
config COMPAT
bool
depends on IA32_SUPPORT
default y
[IA64] Fix build failure in fs/quota.c b716395e2b8e450e294537de0c91476ded2f0395 added code to handle a compatability issue with 32bit quota tools, but the new compat routines are only needed when CONFIG_COMPAT=y (and with this set to 'n' there are compilation problems since some new typedefs are not visible). Reported by Doug Chapman. Fix tuned by a cast of thousands (Andi, Andreas, Arthur, HPA, Willy) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-28 06:35:43 +08:00
config COMPAT_FOR_U64_ALIGNMENT
def_bool COMPAT
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config IA64_MCA_RECOVERY
tristate "MCA recovery from errors other than TLB."
config PERFMON
bool "Performance monitor support"
help
Selects whether support for the IA-64 performance monitor hardware
is included in the kernel. This makes some kernel data-structures a
little bigger and slows down execution a bit, but it is generally
a good idea to turn this on. If you're unsure, say Y.
config IA64_PALINFO
tristate "/proc/pal support"
help
If you say Y here, you are able to get PAL (Processor Abstraction
Layer) information in /proc/pal. This contains useful information
about the processors in your systems, such as cache and TLB sizes
and the PAL firmware version in use.
To use this option, you have to ensure that the "/proc file system
support" (CONFIG_PROC_FS) is enabled, too.
[IA64] Itanium MC Error Injection Tool: Kernel configuration This patch has kenrel configuration changes for the MC Error Injection Tool. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-09 08:06:01 +08:00
config IA64_MC_ERR_INJECT
tristate "MC error injection support"
help
typo fixes Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 07:34:40 +08:00
Adds support for MC error injection. If enabled, the kernel
will provide a sysfs interface for user applications to
call MC error injection PAL procedures to inject various errors.
[IA64] Itanium MC Error Injection Tool: Kernel configuration This patch has kenrel configuration changes for the MC Error Injection Tool. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-09 08:06:01 +08:00
This is a useful tool for MCA testing.
If you're unsure, do not select this option.
[PATCH] drivers/sn/ must be entered for CONFIG_SGI_IOC3 Actually I think this is more appropriate so we don't end up with 17 cases that add drivers/sn to the build lib. Include drivers/sn when CONFIG_IA64_SGI_SN2 or CONFIG_IA64_GENERIC is enabled. Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-19 17:54:00 +08:00
config SGI_SN
def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
[IA64] esi-support Add support for making ESI calls [1]. ESI stands for "Extensible SAL specification" and is basically a way for invoking firmware subroutines which are identified by a GUID. I don't know whether ESI is used by vendors other than HP (if you do, please let me know) but as firmware "backdoors" go, this seems one of the cleaner methods, so it seems reasonable to support it, even though I'm not aware of any publicly documented ESI calls. I'd have liked to make the ESI module completely stand-alone, but unfortunately that is not easily (or not at all) possible because in order to make ESI calls in physical mode, a small stub similar to the EFI stub is needed in the kernel proper. I did try to create a stub that would work in user-level, but it quickly got ugly beyond recognition (e.g., the stub had to make assumptions about how the module-loader generated call-stubs work) and I didn't even get it to work (that's probably fixable, but I didn't bother because I concluded it was too ugly anyhow). While it's not terribly elegant to have kernel code which isn't actively used in the kernel proper, I think it might be worth making an exception here for two reasons: the code is trivially small (all that's really needed is esi_stub.S) and by including it in the normal kernel distro, it might encourage other OEMs to also use ESI, which I think would be far better than each inventing their own firmware "backdoor". The code was originally written by Alex. I just massaged and packaged it a bit (and perhaps messed up some things along the way...). Changes since first version of patch that was posted to mailing list: * Export ia64_esi_call and ia64_esi_call_phys() as GPL symbols. * Disallow building esi.c as a module for now. Building as a module would currently lead to an unresolved reference to "sal_lock" on SMP kernels because that symbol doesn't get exported. * Export esi_call_phys() only if ESI is enabled. * Remove internal stuff from esi.h and add a "proc_type" argument to ia64_esi_call() such that serialization-requirements can be expressed (ESI follows SAL here, where procedure calls may have to be serialized, are MP-safe, or MP-safe andr reentrant). [1] h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,919,00.html Signed-off-by: David Mosberger <David.Mosberger@acm.org> Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-22 02:19:22 +08:00
config IA64_ESI
bool "ESI (Extensible SAL Interface) support"
help
If you say Y here, support is built into the kernel to
make ESI calls. ESI calls are used to support vendor-specific
firmware extensions, such as the ability to inject memory-errors
for test-purposes. If you're unsure, say N.
[IA64] add driver for ACPI methods to call native firmware This driver for HPQ5001 devices installs a global ACPI OpRegion handler. AML methods can use this OpRegion to call native firmware entry points. ACPI does not define a mechanism for AML methods to call native firmware interfaces such as PAL or SAL. This OpRegion handler adds such a mechanism. After the handler is installed, an AML method can call native firmware by storing the arguments and firmware entry point to specific offsets in the OpRegion. When AML reads the "return value" offset from the OpRegion, this handler loads up the arguments, makes the firmware call, and returns the result. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-09-21 04:22:03 +08:00
config IA64_HP_AML_NFW
bool "Support ACPI AML calls to native firmware"
help
This driver installs a global ACPI Operation Region handler for
region 0xA1. AML methods can use this OpRegion to call arbitrary
native firmware functions. The driver installs the OpRegion
handler if there is an HPQ5001 device or if the user supplies
the "force" module parameter, e.g., with the "aml_nfw.force"
kernel command line option.
[IA64] IOC4 config option ordering SERIAL_SGI_IOC4 and BLK_DEV_SGIIOC4 depend upon SGI_IOC4, and SERIAL_SGI_IOC3 depends upon SGI_IOC3. Currently the definitions are out of order in the config sequence. Fix by including drivers/sn/Kconfig immediately after SGI_SN, upon which SGI_IOC4 and SGI_IOC3 depend. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-04-21 04:38:16 +08:00
source "drivers/sn/Kconfig"
[IA64] IA64 Kexec/kdump Changes and updates. 1. Remove fake rendz path and related code according to discuss with Khalid Aziz. 2. fc.i offset fix in relocate_kernel.S. 3. iospic shutdown code eoi and mask race fix from Fujitsu. 4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner. 5. Send slave to SAL slave loop patch from Jay Lan. 6. Kdump on non-recoverable MCA event patch from Jay Lan 7. Use CTL_UNNUMBERED in kdump_on_init sysctl. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-08 01:51:35 +08:00
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on EXPERIMENTAL && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
Fix trivial typos in Kconfig* files Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 13:12:20 +08:00
but it is independent of the system firmware. And like a reboot
[IA64] IA64 Kexec/kdump Changes and updates. 1. Remove fake rendz path and related code according to discuss with Khalid Aziz. 2. fc.i offset fix in relocate_kernel.S. 3. iospic shutdown code eoi and mask race fix from Fujitsu. 4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner. 5. Send slave to SAL slave loop patch from Jay Lan. 6. Kdump on non-recoverable MCA event patch from Jay Lan 7. Use CTL_UNNUMBERED in kdump_on_init sysctl. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-08 01:51:35 +08:00
you can start any kernel with it, not just Linux.
typo fixes Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 07:34:40 +08:00
The name comes from the similarity to the exec system call.
[IA64] IA64 Kexec/kdump Changes and updates. 1. Remove fake rendz path and related code according to discuss with Khalid Aziz. 2. fc.i offset fix in relocate_kernel.S. 3. iospic shutdown code eoi and mask race fix from Fujitsu. 4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner. 5. Send slave to SAL slave loop patch from Jay Lan. 6. Kdump on non-recoverable MCA event patch from Jay Lan 7. Use CTL_UNNUMBERED in kdump_on_init sysctl. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-08 01:51:35 +08:00
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
initially work for you. It may help to enable device hotplugging
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
[IA64] Remove experimental status of kdump This patch removes the experimental status of kdump on IA64. kdump is on IA64 now since more than one year and it has proven to be stable. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-06-26 20:53:11 +08:00
bool "kernel crash dumps"
depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
[IA64] IA64 Kexec/kdump Changes and updates. 1. Remove fake rendz path and related code according to discuss with Khalid Aziz. 2. fc.i offset fix in relocate_kernel.S. 3. iospic shutdown code eoi and mask race fix from Fujitsu. 4. Warm boot hook in machine_kexec to SN SAL code from Jack Steiner. 5. Send slave to SAL slave loop patch from Jay Lan. 6. Kdump on non-recoverable MCA event patch from Jay Lan 7. Use CTL_UNNUMBERED in kdump_on_init sysctl. Signed-off-by: Zou Nan hai <nanhai.zou@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-08 01:51:35 +08:00
help
Generate crash dump after being started by kexec.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "drivers/firmware/Kconfig"
source "fs/Kconfig.binfmt"
endmenu
[IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-07 00:53:54 +08:00
menu "Power management and ACPI options"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[ACPI] IA64-related ACPI Kconfig fixes Build issues were mostly in the ACPI=n case -- don't do that. Select ACPI from IA64_GENERIC. Add some missing dependencies on ACPI. Mark BLACKLIST_YEAR and some laptop-only ACPI drivers as X86-only. Let me know when you get an IA64 Laptop. Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-26 00:08:25 +08:00
source "kernel/power/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "drivers/acpi/Kconfig"
[IA64] Add ACPI based P-state support Patch to support P-state transitions on ia64. This driver is based on ACPI, and uses the ACPI processor driver interface to find out the P-state support information for the processor. This driver plugs into generic cpufreq infrastructure. Once this driver is loaded successfully, ondemand/userspace governor can be used to change the CPU frequency dynamically based on load or on request from userspace process. Refer : ACPI specification - http://www.acpi.info P-state related PAL calls - http://developer.intel.com/design/itanium/downloads/24869909.pdf Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-30 07:15:00 +08:00
if PM
source "arch/ia64/kernel/cpufreq/Kconfig"
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
if !IA64_HP_SIM
menu "Bus options (PCI, PCMCIA)"
config PCI
bool "PCI support"
help
[IA64] update CONFIG_PCI description The current one doesn't even make sense anymore on i386 where it apparently came from. Follow-up wordsmithing by Matthew Wilcox and Tony Luck. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-10 04:38:00 +08:00
Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y
here unless you are using a simulator without PCI support.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config PCI_DOMAINS
PCI: Only build PCI syscalls on architectures that want them The PCI syscalls are built on every architecture except X86, but only a few have ever hooked them up. Use a new Kconfig symbol to save a couple of kB on the architectures that have never used the syscalls. Tested on x86 and ia64 only. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 00:54:40 +08:00
def_bool PCI
config PCI_SYSCALL
def_bool PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IA64] Make PCI Express support selectable When I tried to use PCI Express Hotplug driver on my ia64 box, I noticed that "PCI Express support" is not even selectable on ia64. This patch makes PCI Express support selectable. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-04-28 10:50:43 +08:00
source "drivers/pci/pcie/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "drivers/pci/Kconfig"
source "drivers/pci/hotplug/Kconfig"
source "drivers/pcmcia/Kconfig"
[IA64] Add Variable Page Size and IA64 Support in Intel IOMMU The patch contains Intel IOMMU IA64 specific code. It defines new machvec dig_vtd, hooks for IOMMU, DMAR table detection, cache line flush function, etc. For a generic kernel with CONFIG_DMAR=y, if Intel IOMMU is detected, dig_vtd is used for machinve vector. Otherwise, kernel falls back to dig machine vector. Kernel parameter "machvec=dig" or "intel_iommu=off" can be used to force kernel to boot dig machine vector. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-18 03:14:13 +08:00
config DMAR
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
depends on IA64_GENERIC && ACPI && EXPERIMENTAL
help
DMA remapping (DMAR) devices support enables independent address
translations for Direct Memory Access (DMA) from devices.
These DMA remapping devices are reported via ACPI tables
and include PCI device scope covered by these DMA
remapping devices.
[IA64] enable setting DMAR on by default The previous commit which introduced the DMAR_DEFAULT_ON setting in drivers/pci/dmar.c neglected to add the ability for ia64 to enable the IOMMU by default. Rectify that mistake, doh! Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-14 17:11:29 +08:00
config DMAR_DEFAULT_ON
def_bool y
prompt "Enable DMA Remapping Devices by default"
depends on DMAR
help
Selecting this option will enable a DMAR device at boot time if
one is found. If this option is not selected, DMAR support can
be enabled by passing intel_iommu=on to the kernel. It is
recommended you say N here while the DMAR code remains
experimental.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu
endif
[NET]: add a top-level Networking menu to *config Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-12 12:03:49 +08:00
source "net/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "drivers/Kconfig"
[IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-07 00:53:54 +08:00
source "arch/ia64/hp/sim/Kconfig"
[PATCH] mspec driver build fix Fix MSPEC driver to build for non SN2 enabled configs as the driver should work in cached and uncached modes (no fetchop) on these systems. In addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for it and move it to arch/ia64/Kconfig to avoid warnings on non ia64 architectures running allmodconfig. Once the Kconfig code is fixed, we can move it back. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-11 04:27:49 +08:00
config MSPEC
tristate "Memory special operations driver"
depends on IA64
select IA64_UNCACHED_ALLOCATOR
help
If you have an ia64 and you want to enable memory special
operations support (formerly known as fetchop), say Y here,
otherwise say N.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "fs/Kconfig"
[IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-11-07 00:53:54 +08:00
source "arch/ia64/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
KVM: ia64: Enable kvm build for ia64 Update the related Makefile and KConfig for kvm build Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-28 14:58:47 +08:00
source "arch/ia64/kvm/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
source "lib/Kconfig"
#
# Use the generic interrupt handling code in kernel/irq/:
#
config GENERIC_HARDIRQS
bool
default y
config GENERIC_IRQ_PROBE
bool
default y
[PATCH] x86/x86_64: deferred handling of writes to /proc/irqxx/smp_affinity When handling writes to /proc/irq, current code is re-programming rte entries directly. This is not recommended and could potentially cause chipset's to lockup, or cause missing interrupts. CONFIG_IRQ_BALANCE does this correctly, where it re-programs only when the interrupt is pending. The same needs to be done for /proc/irq handling as well. Otherwise user space irq balancers are really not doing the right thing. - Changed pending_irq_balance_cpumask to pending_irq_migrate_cpumask for lack of a generic name. - added move_irq out of IRQ_BALANCE, and added this same to X86_64 - Added new proc handler for write, so we can do deferred write at irq handling time. - Display of /proc/irq/XX/smp_affinity used to display CPU_MASKALL, instead it now shows only active cpu masks, or exactly what was set. - Provided a common move_irq implementation, instead of duplicating when using generic irq framework. Tested on i386/x86_64 and ia64 with CONFIG_PCI_MSI turned on and off. Tested UP builds as well. MSI testing: tbd: I have cards, need to look for a x-over cable, although I did test an earlier version of this patch. Will test in a couple days. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Zwane Mwaikambo <zwane@holomorphy.com> Grudgingly-acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 06:16:15 +08:00
config GENERIC_PENDING_IRQ
bool
depends on GENERIC_HARDIRQS && SMP
default y
[PATCH] genirq: cleanup: turn ARCH_HAS_IRQ_PER_CPU into CONFIG_IRQ_PER_CPU Cleanup: change ARCH_HAS_IRQ_PER_CPU into a Kconfig method. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 17:24:43 +08:00
config IRQ_PER_CPU
bool
default y
[IA64] make IOMMU respect the segment boundary limits IA64's IOMMU implementation allocates memory areas spanning LLD's segment boundary limit. It forces low level drivers to have a workaround to adjust scatter lists that the IOMMU builds. We are in the process of making all the IOMMUs respect the segment boundary limits to remove such work around in LLDs. This patch is for IA64's IOMMU. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-03-29 05:27:03 +08:00
config IOMMU_HELPER
swiotlb: use iommu_is_span_boundary helper function iommu_is_span_boundary in lib/iommu-helper.c was exported for PARISC IOMMUs (commit 3715863aa142c4f4c5208f5f3e5e9bac06006d2f). SWIOTLB can use it instead of the homegrown function. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 15:59:36 +08:00
def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB)
select IOMMU_API when DMAR and/or AMD_IOMMU is selected These two IOMMUs can implement the current version of this API. So select the API if one or both of these IOMMU drivers is selected. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2008-11-27 00:25:13 +08:00
config IOMMU_API
def_bool (DMAR)
Copy Permalink