AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
c89b6e6bda
kernel_optimize_test/net/bluetooth/hci_event.c

1926 lines
42 KiB
C
Raw Normal View History

[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:33 +08:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as
published by the Free Software Foundation;
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:33 +08:00
CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
[NET] BLUETOOTH: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:33 +08:00
ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
SOFTWARE IS DISCLAIMED.
*/
/* Bluetooth HCI event handling. */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <net/sock.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
/* Handle HCI Event packets */
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
clear_bit(HCI_INQUIRY, &hdev->flags);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
hci_conn_check_pending(hdev);
}
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
clear_bit(HCI_INQUIRY, &hdev->flags);
hci_conn_check_pending(hdev);
}
static void hci_cc_remote_name_req_cancel(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static void hci_cc_role_discovery(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_role_discovery *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn) {
if (rp->role)
conn->link_mode &= ~HCI_LM_MASTER;
else
conn->link_mode |= HCI_LM_MASTER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
static void hci_cc_read_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_link_policy *rp = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
if (conn)
conn->link_policy = __le16_to_cpu(rp->policy);
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_write_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_rp_write_link_policy *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hci_conn *conn;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LINK_POLICY);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(rp->handle));
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (conn)
bluetooth: use get/put_unaligned_* helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03 07:25:46 +08:00
conn->link_policy = get_unaligned_le16(sent + 2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
static void hci_cc_read_def_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_def_link_policy *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
hdev->link_policy = __le16_to_cpu(rp->policy);
}
static void hci_cc_write_def_link_policy(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_DEF_LINK_POLICY);
if (!sent)
return;
if (!status)
hdev->link_policy = get_unaligned_le16(sent);
hci_req_complete(hdev, status);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (status)
return;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_LOCAL_NAME);
if (!sent)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
memcpy(hdev->dev_name, sent, 248);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
}
static void hci_cc_read_local_name(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_name *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
memcpy(hdev->dev_name, rp->name, 248);
}
static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_AUTH_ENABLE);
if (!sent)
return;
if (!status) {
__u8 param = *((__u8 *) sent);
if (param == AUTH_ENABLED)
set_bit(HCI_AUTH, &hdev->flags);
else
clear_bit(HCI_AUTH, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void *sent;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_ENCRYPT_MODE);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!status) {
__u8 param = *((__u8 *) sent);
if (param)
set_bit(HCI_ENCRYPT, &hdev->flags);
else
clear_bit(HCI_ENCRYPT, &hdev->flags);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SCAN_ENABLE);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!status) {
__u8 param = *((__u8 *) sent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
clear_bit(HCI_PSCAN, &hdev->flags);
clear_bit(HCI_ISCAN, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (param & SCAN_INQUIRY)
set_bit(HCI_ISCAN, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (param & SCAN_PAGE)
set_bit(HCI_PSCAN, &hdev->flags);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_class_of_dev *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
memcpy(hdev->dev_class, rp->dev_class, 3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s class 0x%.2x%.2x%.2x", hdev->name,
hdev->dev_class[2], hdev->dev_class[1], hdev->dev_class[0]);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_write_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (status)
return;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_CLASS_OF_DEV);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
memcpy(hdev->dev_class, sent, 3);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_voice_setting(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_voice_setting *rp = (void *) skb->data;
__u16 setting;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
setting = __le16_to_cpu(rp->voice_setting);
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (hdev->voice_setting == setting)
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
return;
hdev->voice_setting = setting;
BT_DBG("%s voice setting 0x%04x", hdev->name, setting);
if (hdev->notify) {
tasklet_disable(&hdev->tx_task);
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
tasklet_enable(&hdev->tx_task);
}
}
static void hci_cc_write_voice_setting(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
__u16 setting;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (status)
return;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_VOICE_SETTING);
if (!sent)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
setting = get_unaligned_le16(sent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (hdev->voice_setting == setting)
return;
hdev->voice_setting = setting;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
BT_DBG("%s voice setting 0x%04x", hdev->name, setting);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Some cleanups for HCI event handling Some minor cosmetic cleanups to the HCI event handling to make the code easier to read and understand. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if (hdev->notify) {
tasklet_disable(&hdev->tx_task);
hdev->notify(hdev, HCI_NOTIFY_VOICE_SETTING);
tasklet_enable(&hdev->tx_task);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_host_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
__u8 status = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
}
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 15:57:20 +08:00
[Bluetooth] Track status of Simple Pairing mode The Simple Pairing feature is optional and needs to be enabled by the host stack first. The Linux kernel relies on the Bluetooth daemon to either enable or disable it, but at any time it needs to know the current state of the Simple Pairing mode. So track any changes made by external entities and store the current mode in the HCI device structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
static void hci_cc_read_ssp_mode(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_ssp_mode *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (rp->status)
return;
hdev->ssp_mode = rp->mode;
}
static void hci_cc_write_ssp_mode(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
void *sent;
BT_DBG("%s status 0x%x", hdev->name, status);
if (status)
return;
sent = hci_sent_cmd_data(hdev, HCI_OP_WRITE_SSP_MODE);
if (!sent)
return;
hdev->ssp_mode = *((__u8 *) sent);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_local_version(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_version *rp = (void *) skb->data;
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 15:57:20 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 15:57:20 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 15:57:20 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hdev->hci_ver = rp->hci_ver;
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
hdev->hci_rev = __le16_to_cpu(rp->hci_rev);
hdev->manufacturer = __le16_to_cpu(rp->manufacturer);
[Bluetooth] Read local version information on device init The local version information are needed to identify certain feature sets of devices. They must be read on device init and stored for later use. It is also possible to access them through the device model. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-09-23 15:57:20 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s manufacturer %d hci ver %d:%d", hdev->name,
hdev->manufacturer,
hdev->hci_ver, hdev->hci_rev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_local_commands(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_commands *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
memcpy(hdev->commands, rp->commands, sizeof(hdev->commands));
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_local_features(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_local_features *rp = (void *) skb->data;
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 15:51:55 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 15:51:55 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
memcpy(hdev->features, rp->features, 8);
[Bluetooth] Add basics to better support and handle eSCO links To better support and handle eSCO links in the future a bunch of constants needs to be added and some basic routines need to be updated. This is the initial step. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-07-11 15:51:55 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
/* Adjust default settings according to features
* supported by device. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[0] & LMP_3SLOT)
hdev->pkt_type |= (HCI_DM3 | HCI_DH3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[0] & LMP_5SLOT)
hdev->pkt_type |= (HCI_DM5 | HCI_DH5);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[1] & LMP_HV2) {
hdev->pkt_type |= (HCI_HV2);
hdev->esco_type |= (ESCO_HV2);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[1] & LMP_HV3) {
hdev->pkt_type |= (HCI_HV3);
hdev->esco_type |= (ESCO_HV3);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[3] & LMP_ESCO)
hdev->esco_type |= (ESCO_EV3);
[Bluetooth] Correct SCO buffer size on request This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:29 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[4] & LMP_EV4)
hdev->esco_type |= (ESCO_EV4);
[Bluetooth] Correct SCO buffer size on request This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by: Olivier Galibert <galibert@pobox.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:29 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (hdev->features[4] & LMP_EV5)
hdev->esco_type |= (ESCO_EV5);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s features 0x%.2x%.2x%.2x%.2x%.2x%.2x%.2x%.2x", hdev->name,
hdev->features[0], hdev->features[1],
hdev->features[2], hdev->features[3],
hdev->features[4], hdev->features[5],
hdev->features[6], hdev->features[7]);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cc_read_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_buffer_size *rp = (void *) skb->data;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, rp->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (rp->status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hdev->acl_mtu = __le16_to_cpu(rp->acl_mtu);
hdev->sco_mtu = rp->sco_mtu;
hdev->acl_pkts = __le16_to_cpu(rp->acl_max_pkt);
hdev->sco_pkts = __le16_to_cpu(rp->sco_max_pkt);
if (test_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks)) {
hdev->sco_mtu = 64;
hdev->sco_pkts = 8;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hdev->acl_cnt = hdev->acl_pkts;
hdev->sco_cnt = hdev->sco_pkts;
BT_DBG("%s acl mtu %d:%d sco mtu %d:%d", hdev->name,
hdev->acl_mtu, hdev->acl_pkts,
hdev->sco_mtu, hdev->sco_pkts);
}
static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_rp_read_bd_addr *rp = (void *) skb->data;
BT_DBG("%s status 0x%x", hdev->name, rp->status);
if (!rp->status)
bacpy(&hdev->bdaddr, &rp->bdaddr);
hci_req_complete(hdev, rp->status);
}
static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%x", hdev->name, status);
if (status) {
hci_req_complete(hdev, status);
hci_conn_check_pending(hdev);
} else
set_bit(HCI_INQUIRY, &hdev->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline void hci_cs_create_conn(struct hci_dev *hdev, __u8 status)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_cp_create_conn *cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hci_conn *conn;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
cp = hci_sent_cmd_data(hdev, HCI_OP_CREATE_CONN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s bdaddr %s conn %p", hdev->name, batostr(&cp->bdaddr), conn);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (status) {
if (conn && conn->state == BT_CONNECT) {
[Bluetooth] Support concurrent connect requests Most Bluetooth chips don't support concurrent connect requests, because this would involve a multiple baseband page with only one radio. In the case an upper layer like L2CAP requests a concurrent connect these chips return the error "Command Disallowed" for the second request. If this happens it the responsibility of the Bluetooth core to queue the request and try again after the previous connect attempt has been completed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-10-15 23:30:56 +08:00
if (status != 0x0c || conn->attempt > 2) {
conn->state = BT_CLOSED;
hci_proto_connect_cfm(conn, status);
hci_conn_del(conn);
} else
conn->state = BT_CONNECT2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} else {
if (!conn) {
conn = hci_conn_add(hdev, ACL_LINK, &cp->bdaddr);
if (conn) {
conn->out = 1;
conn->link_mode |= HCI_LM_MASTER;
} else
BT_ERR("No memmory for new connection");
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cs_add_sco(struct hci_dev *hdev, __u8 status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_cp_add_sco *cp;
struct hci_conn *acl, *sco;
__u16 handle;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!status)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
cp = hci_sent_cmd_data(hdev, HCI_OP_ADD_SCO);
if (!cp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
handle = __le16_to_cpu(cp->handle);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s handle %d", hdev->name, handle);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl && (sco = acl->link)) {
sco->state = BT_CLOSED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_proto_connect_cfm(sco, status);
hci_conn_del(sco);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
static void hci_cs_auth_requested(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_auth_requested *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_AUTH_REQUESTED);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_proto_connect_cfm(conn, status);
hci_conn_put(conn);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_set_conn_encrypt(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_set_conn_encrypt *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SET_CONN_ENCRYPT);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_proto_connect_cfm(conn, status);
hci_conn_put(conn);
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status)
{
BT_DBG("%s status 0x%x", hdev->name, status);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
static void hci_cs_read_remote_features(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_read_remote_features *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_FEATURES);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_proto_connect_cfm(conn, status);
hci_conn_put(conn);
}
}
hci_dev_unlock(hdev);
}
static void hci_cs_read_remote_ext_features(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_read_remote_ext_features *cp;
struct hci_conn *conn;
BT_DBG("%s status 0x%x", hdev->name, status);
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES);
if (!cp)
return;
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn) {
if (conn->state == BT_CONFIG) {
hci_proto_connect_cfm(conn, status);
hci_conn_put(conn);
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cs_setup_sync_conn(struct hci_dev *hdev, __u8 status)
{
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
struct hci_cp_setup_sync_conn *cp;
struct hci_conn *acl, *sco;
__u16 handle;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
if (!status)
return;
cp = hci_sent_cmd_data(hdev, HCI_OP_SETUP_SYNC_CONN);
if (!cp)
return;
handle = __le16_to_cpu(cp->handle);
BT_DBG("%s handle %d", hdev->name, handle);
hci_dev_lock(hdev);
acl = hci_conn_hash_lookup_handle(hdev, handle);
if (acl && (sco = acl->link)) {
sco->state = BT_CLOSED;
hci_proto_connect_cfm(sco, status);
hci_conn_del(sco);
}
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_cp_sniff_mode *cp;
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
cp = hci_sent_cmd_data(hdev, HCI_OP_SNIFF_MODE);
if (!cp)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn)
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
{
struct hci_cp_exit_sniff_mode *cp;
struct hci_conn *conn;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s status 0x%x", hdev->name, status);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
cp = hci_sent_cmd_data(hdev, HCI_OP_EXIT_SNIFF_MODE);
if (!cp)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
if (conn)
clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
__u8 status = *((__u8 *) skb->data);
BT_DBG("%s status %d", hdev->name, status);
clear_bit(HCI_INQUIRY, &hdev->flags);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_req_complete(hdev, status);
[Bluetooth] Handling pending connect attempts after inquiry After an inquiry completed or got canceled the Bluetooth core should check for any pending connect attempts. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-11-19 05:14:22 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_conn_check_pending(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline void hci_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:27:49 +08:00
struct inquiry_data data;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct inquiry_info *info = (void *) (skb->data + 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:27:49 +08:00
if (!num_rsp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_dev_lock(hdev);
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:27:49 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = 0x00;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
data.ssp_mode = 0x00;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
info++;
hci_inquiry_cache_update(hdev, &data);
}
[Bluetooth]: Workaround for inquiry results with RSSI and page scan mode This patch implements a workaround for buggy Bluetooth 1.2 devices from Silicon Wave. Their inquiry results with RSSI contain the page scan mode field. This field was removed in the final Bluetooth 1.2 specification. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:27:49 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_dev_unlock(hdev);
}
static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!conn)
goto unlock;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
hci_conn_hold(conn);
} else
conn->state = BT_CONNECTED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Use a more unique bus name for connections When attaching Bluetooth low-level connections to the bus, the bus name is constructed from the remote address since at that time the connection handle is not assigned yet. This has worked so far, but also caused a lot of troubles. It is better to postpone the creation of the sysfs entry to the time when the connection actually has been established and then use its connection handle as unique identifier. This also fixes the case where two different adapters try to connect to the same remote device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:51 +08:00
hci_conn_add_sysfs(conn);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (test_bit(HCI_AUTH, &hdev->flags))
conn->link_mode |= HCI_LM_AUTH;
if (test_bit(HCI_ENCRYPT, &hdev->flags))
conn->link_mode |= HCI_LM_ENCRYPT;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
/* Get remote features */
if (conn->type == ACL_LINK) {
struct hci_cp_read_remote_features cp;
cp.handle = ev->handle;
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
hci_send_cmd(hdev, HCI_OP_READ_REMOTE_FEATURES,
sizeof(cp), &cp);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Set packet type for incoming connection */
[Bluetooth] Track connection packet type changes The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
if (!conn->out && hdev->hci_ver < 3) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hci_cp_change_conn_ptype cp;
cp.handle = ev->handle;
[Bluetooth] Track connection packet type changes The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
cp.pkt_type = cpu_to_le16(conn->pkt_type);
hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE,
sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
} else
conn->state = BT_CLOSED;
if (conn->type == ACL_LINK) {
struct hci_conn *sco = conn->link;
if (sco) {
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
if (!ev->status) {
if (lmp_esco_capable(hdev))
hci_setup_sync(sco, conn->handle);
else
hci_add_sco(sco, conn->handle);
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_proto_connect_cfm(sco, ev->status);
hci_conn_del(sco);
}
}
}
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (ev->status) {
hci_proto_connect_cfm(conn, ev->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_conn_del(conn);
Bluetooth: Fix SCO state handling for incoming connections When the remote device supports only SCO connections, on receipt of the HCI_EV_CONN_COMPLETE event packet, the connect state is changed to BT_CONNECTED, but the socket state is not updated. Hence, the connect() call times out even though the SCO connection has been successfully established. Based on a report by Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2009-01-16 04:57:03 +08:00
} else if (ev->link_type != ACL_LINK)
hci_proto_connect_cfm(conn, ev->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
unlock:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_dev_unlock(hdev);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_conn_check_pending(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_conn_request *ev = (void *) skb->data;
int mask = hdev->link_mode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s bdaddr %s type 0x%x", hdev->name,
batostr(&ev->bdaddr), ev->link_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
mask |= hci_proto_connect_ind(hdev, &ev->bdaddr, ev->link_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (mask & HCI_LM_ACCEPT) {
/* Connection accepted */
[Bluetooth] Update class of device value whenever possible The class of device value can only be retrieved via inquiry or during an incoming connection request. Outgoing connections can't ask for the class of device. To compensate for this the value is stored and copied via the inquiry cache, but currently only updated via inquiry. This update should also happen during an incoming connection request. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
struct inquiry_entry *ie;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hci_conn *conn;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
[Bluetooth] Update class of device value whenever possible The class of device value can only be retrieved via inquiry or during an incoming connection request. Outgoing connections can't ask for the class of device. To compensate for this the value is stored and copied via the inquiry cache, but currently only updated via inquiry. This update should also happen during an incoming connection request. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr)))
memcpy(ie->data.dev_class, ev->dev_class, 3);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
if (!conn) {
if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
BT_ERR("No memmory for new connection");
hci_dev_unlock(hdev);
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
memcpy(conn->dev_class, ev->dev_class, 3);
conn->state = BT_CONNECT;
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
if (ev->link_type == ACL_LINK || !lmp_esco_capable(hdev)) {
struct hci_cp_accept_conn_req cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
bacpy(&cp.bdaddr, &ev->bdaddr);
if (lmp_rswitch_capable(hdev) && (mask & HCI_LM_MASTER))
cp.role = 0x00; /* Become master */
else
cp.role = 0x01; /* Remain slave */
hci_send_cmd(hdev, HCI_OP_ACCEPT_CONN_REQ,
sizeof(cp), &cp);
} else {
struct hci_cp_accept_sync_conn_req cp;
bacpy(&cp.bdaddr, &ev->bdaddr);
[Bluetooth] Track connection packet type changes The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
cp.pkt_type = cpu_to_le16(conn->pkt_type);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
cp.tx_bandwidth = cpu_to_le32(0x00001f40);
cp.rx_bandwidth = cpu_to_le32(0x00001f40);
cp.max_latency = cpu_to_le16(0xffff);
cp.content_format = cpu_to_le16(hdev->voice_setting);
cp.retrans_effort = 0xff;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
sizeof(cp), &cp);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
} else {
/* Connection rejected */
struct hci_cp_reject_conn_req cp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
bacpy(&cp.bdaddr, &ev->bdaddr);
cp.reason = 0x0f;
hci_send_cmd(hdev, HCI_OP_REJECT_CONN_REQ, sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_disconn_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (ev->status)
return;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn->state = BT_CLOSED;
[Bluetooth] Use a more unique bus name for connections When attaching Bluetooth low-level connections to the bus, the bus name is constructed from the remote address since at that time the connection handle is not assigned yet. This has worked so far, but also caused a lot of troubles. It is better to postpone the creation of the sysfs entry to the time when the connection actually has been established and then use its connection handle as unique identifier. This also fixes the case where two different adapters try to connect to the same remote device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:51 +08:00
hci_conn_del_sysfs(conn);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_proto_disconn_ind(conn, ev->reason);
hci_conn_del(conn);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
}
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_auth_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_AUTH;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (conn->state == BT_CONFIG) {
if (!ev->status && hdev->ssp_mode > 0 &&
conn->ssp_mode > 0) {
struct hci_cp_set_conn_encrypt cp;
cp.handle = ev->handle;
cp.encrypt = 0x01;
hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT,
sizeof(cp), &cp);
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
} else
hci_auth_cfm(conn, ev->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
if (!ev->status) {
struct hci_cp_set_conn_encrypt cp;
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
cp.handle = ev->handle;
cp.encrypt = 0x01;
hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT,
sizeof(cp), &cp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
hci_encrypt_cfm(conn, ev->status, 0x00);
}
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_conn_check_pending(hdev);
}
static inline void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_encrypt_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (conn) {
if (!ev->status) {
[Bluetooth] Update authentication status after successful encryption The authentication status is not communicated to both parties. This is actually a flaw in the Bluetooth specification. Only the requesting side really knows if the authentication was successful or not. This piece of information is however needed on the other side to know if it has to trigger the authentication procedure or not. Worst case is that both sides will request authentication at different times, but this should be avoided since it costs extra time when setting up a new connection. For Bluetooth encryption it is required to authenticate the link first and the encryption status is communicated to both sides. So when a link is switched to encryption it is possible to update the authentication status since it implies an authenticated link. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:45 +08:00
if (ev->encrypt) {
/* Encryption implies authentication */
conn->link_mode |= HCI_LM_AUTH;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
conn->link_mode |= HCI_LM_ENCRYPT;
[Bluetooth] Update authentication status after successful encryption The authentication status is not communicated to both parties. This is actually a flaw in the Bluetooth specification. Only the requesting side really knows if the authentication was successful or not. This piece of information is however needed on the other side to know if it has to trigger the authentication procedure or not. Worst case is that both sides will request authentication at different times, but this should be avoided since it costs extra time when setting up a new connection. For Bluetooth encryption it is required to authenticate the link first and the encryption status is communicated to both sides. So when a link is switched to encryption it is possible to update the authentication status since it implies an authenticated link. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:45 +08:00
} else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
conn->link_mode &= ~HCI_LM_ENCRYPT;
}
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (conn->state == BT_CONFIG) {
if (!ev->status)
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
} else
hci_encrypt_cfm(conn, ev->status, ev->encrypt);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_change_link_key_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_change_link_key_complete *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (conn) {
if (!ev->status)
conn->link_mode |= HCI_LM_SECURE;
clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
hci_key_change_cfm(conn, ev->status);
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_remote_features *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (conn) {
if (!ev->status)
memcpy(conn->features, ev->features, 8);
if (conn->state == BT_CONFIG) {
if (!ev->status && lmp_ssp_capable(hdev) &&
lmp_ssp_capable(conn)) {
struct hci_cp_read_remote_ext_features cp;
cp.handle = ev->handle;
cp.page = 0x01;
hci_send_cmd(hdev,
HCI_OP_READ_REMOTE_EXT_FEATURES,
sizeof(cp), &cp);
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
}
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_unlock(hdev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_remote_version_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_qos_setup_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s", hdev->name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_complete *ev = (void *) skb->data;
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY_CANCEL:
hci_cc_inquiry_cancel(hdev, skb);
break;
case HCI_OP_EXIT_PERIODIC_INQ:
hci_cc_exit_periodic_inq(hdev, skb);
break;
case HCI_OP_REMOTE_NAME_REQ_CANCEL:
hci_cc_remote_name_req_cancel(hdev, skb);
break;
case HCI_OP_ROLE_DISCOVERY:
hci_cc_role_discovery(hdev, skb);
break;
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
case HCI_OP_READ_LINK_POLICY:
hci_cc_read_link_policy(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_OP_WRITE_LINK_POLICY:
hci_cc_write_link_policy(hdev, skb);
break;
[Bluetooth] Make use of the default link policy settings The Bluetooth specification supports the default link policy settings on a per host controller basis. For every new connection the link manager would then use these settings. It is better to use this instead of bothering the controller on every connection setup to overwrite the default settings. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:47 +08:00
case HCI_OP_READ_DEF_LINK_POLICY:
hci_cc_read_def_link_policy(hdev, skb);
break;
case HCI_OP_WRITE_DEF_LINK_POLICY:
hci_cc_write_def_link_policy(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_OP_RESET:
hci_cc_reset(hdev, skb);
break;
case HCI_OP_WRITE_LOCAL_NAME:
hci_cc_write_local_name(hdev, skb);
break;
case HCI_OP_READ_LOCAL_NAME:
hci_cc_read_local_name(hdev, skb);
break;
case HCI_OP_WRITE_AUTH_ENABLE:
hci_cc_write_auth_enable(hdev, skb);
break;
case HCI_OP_WRITE_ENCRYPT_MODE:
hci_cc_write_encrypt_mode(hdev, skb);
break;
case HCI_OP_WRITE_SCAN_ENABLE:
hci_cc_write_scan_enable(hdev, skb);
break;
case HCI_OP_READ_CLASS_OF_DEV:
hci_cc_read_class_of_dev(hdev, skb);
break;
case HCI_OP_WRITE_CLASS_OF_DEV:
hci_cc_write_class_of_dev(hdev, skb);
break;
case HCI_OP_READ_VOICE_SETTING:
hci_cc_read_voice_setting(hdev, skb);
break;
case HCI_OP_WRITE_VOICE_SETTING:
hci_cc_write_voice_setting(hdev, skb);
break;
case HCI_OP_HOST_BUFFER_SIZE:
hci_cc_host_buffer_size(hdev, skb);
break;
[Bluetooth] Track status of Simple Pairing mode The Simple Pairing feature is optional and needs to be enabled by the host stack first. The Linux kernel relies on the Bluetooth daemon to either enable or disable it, but at any time it needs to know the current state of the Simple Pairing mode. So track any changes made by external entities and store the current mode in the HCI device structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
case HCI_OP_READ_SSP_MODE:
hci_cc_read_ssp_mode(hdev, skb);
break;
case HCI_OP_WRITE_SSP_MODE:
hci_cc_write_ssp_mode(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_OP_READ_LOCAL_VERSION:
hci_cc_read_local_version(hdev, skb);
break;
case HCI_OP_READ_LOCAL_COMMANDS:
hci_cc_read_local_commands(hdev, skb);
break;
case HCI_OP_READ_LOCAL_FEATURES:
hci_cc_read_local_features(hdev, skb);
break;
case HCI_OP_READ_BUFFER_SIZE:
hci_cc_read_buffer_size(hdev, skb);
break;
case HCI_OP_READ_BD_ADDR:
hci_cc_read_bd_addr(hdev, skb);
break;
default:
BT_DBG("%s opcode 0x%x", hdev->name, opcode);
break;
}
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
hci_sched_cmd(hdev);
}
}
static inline void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_cmd_status *ev = (void *) skb->data;
__u16 opcode;
skb_pull(skb, sizeof(*ev));
opcode = __le16_to_cpu(ev->opcode);
switch (opcode) {
case HCI_OP_INQUIRY:
hci_cs_inquiry(hdev, ev->status);
break;
case HCI_OP_CREATE_CONN:
hci_cs_create_conn(hdev, ev->status);
break;
case HCI_OP_ADD_SCO:
hci_cs_add_sco(hdev, ev->status);
break;
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
case HCI_OP_AUTH_REQUESTED:
hci_cs_auth_requested(hdev, ev->status);
break;
case HCI_OP_SET_CONN_ENCRYPT:
hci_cs_set_conn_encrypt(hdev, ev->status);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_OP_REMOTE_NAME_REQ:
hci_cs_remote_name_req(hdev, ev->status);
break;
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
case HCI_OP_READ_REMOTE_FEATURES:
hci_cs_read_remote_features(hdev, ev->status);
break;
case HCI_OP_READ_REMOTE_EXT_FEATURES:
hci_cs_read_remote_ext_features(hdev, ev->status);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_OP_SETUP_SYNC_CONN:
hci_cs_setup_sync_conn(hdev, ev->status);
break;
case HCI_OP_SNIFF_MODE:
hci_cs_sniff_mode(hdev, ev->status);
break;
case HCI_OP_EXIT_SNIFF_MODE:
hci_cs_exit_sniff_mode(hdev, ev->status);
break;
default:
BT_DBG("%s opcode 0x%x", hdev->name, opcode);
break;
}
if (ev->ncmd) {
atomic_set(&hdev->cmd_cnt, 1);
if (!skb_queue_empty(&hdev->cmd_q))
hci_sched_cmd(hdev);
}
}
static inline void hci_role_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_role_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn) {
if (!ev->status) {
if (ev->role)
conn->link_mode &= ~HCI_LM_MASTER;
else
conn->link_mode |= HCI_LM_MASTER;
}
clear_bit(HCI_CONN_RSWITCH_PEND, &conn->pend);
hci_role_switch_cfm(conn, ev->status, ev->role);
}
hci_dev_unlock(hdev);
}
static inline void hci_num_comp_pkts_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_num_comp_pkts *ev = (void *) skb->data;
__le16 *ptr;
int i;
skb_pull(skb, sizeof(*ev));
BT_DBG("%s num_hndl %d", hdev->name, ev->num_hndl);
if (skb->len < ev->num_hndl * 4) {
BT_DBG("%s bad parameters", hdev->name);
return;
}
tasklet_disable(&hdev->tx_task);
for (i = 0, ptr = (__le16 *) skb->data; i < ev->num_hndl; i++) {
struct hci_conn *conn;
__u16 handle, count;
bluetooth: use get/put_unaligned_* helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-03 07:25:46 +08:00
handle = get_unaligned_le16(ptr++);
count = get_unaligned_le16(ptr++);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
conn = hci_conn_hash_lookup_handle(hdev, handle);
if (conn) {
conn->sent -= count;
if (conn->type == ACL_LINK) {
if ((hdev->acl_cnt += count) > hdev->acl_pkts)
hdev->acl_cnt = hdev->acl_pkts;
} else {
if ((hdev->sco_cnt += count) > hdev->sco_pkts)
hdev->sco_cnt = hdev->sco_pkts;
}
}
}
hci_sched_tx(hdev);
tasklet_enable(&hdev->tx_task);
}
static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_mode_change *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (conn) {
conn->mode = ev->mode;
conn->interval = __le16_to_cpu(ev->interval);
if (!test_and_clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend)) {
if (conn->mode == HCI_CM_ACTIVE)
conn->power_save = 1;
else
conn->power_save = 0;
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
static inline void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_clock_offset *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (conn && !ev->status) {
struct inquiry_entry *ie;
if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst))) {
ie->data.clock_offset = ev->clock_offset;
ie->timestamp = jiffies;
}
}
hci_dev_unlock(hdev);
}
[Bluetooth] Track connection packet type changes The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
static inline void hci_pkt_type_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_pkt_type_change *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn && !ev->status)
conn->pkt_type = __le16_to_cpu(ev->pkt_type);
hci_dev_unlock(hdev);
}
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:28:02 +08:00
static inline void hci_pscan_rep_mode_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_pscan_rep_mode *ev = (void *) skb->data;
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:28:02 +08:00
struct inquiry_entry *ie;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr))) {
ie->data.pscan_rep_mode = ev->pscan_rep_mode;
ie->timestamp = jiffies;
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_inquiry_result_with_rssi_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct inquiry_data data;
int num_rsp = *((__u8 *) skb->data);
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
if (!num_rsp)
return;
hci_dev_lock(hdev);
if ((skb->len - 1) / num_rsp != sizeof(struct inquiry_info_with_rssi)) {
struct inquiry_info_with_rssi_and_pscan_mode *info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = info->pscan_mode;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
data.ssp_mode = 0x00;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
info++;
hci_inquiry_cache_update(hdev, &data);
}
} else {
struct inquiry_info_with_rssi *info = (void *) (skb->data + 1);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
data.ssp_mode = 0x00;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
info++;
hci_inquiry_cache_update(hdev, &data);
}
}
hci_dev_unlock(hdev);
}
static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
struct hci_ev_remote_ext_features *ev = (void *) skb->data;
struct hci_conn *conn;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s", hdev->name);
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (!ev->status && ev->page == 0x01) {
struct inquiry_entry *ie;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst)))
ie->data.ssp_mode = (ev->features[0] & 0x01);
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
conn->ssp_mode = (ev->features[0] & 0x01);
}
if (conn->state == BT_CONFIG) {
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
if (!ev->status && hdev->ssp_mode > 0 &&
[Bluetooth] Fix reference counting during ACL config stage The ACL config stage keeps holding a reference count on incoming connections when requesting the extended features. This results in keeping an ACL link up without any users. The problem here is that the Bluetooth specification doesn't define an ownership of the ACL link and thus it can happen that the implementation on the initiator side doesn't care about disconnecting unused links. In this case the acceptor needs to take care of this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-09-09 13:19:19 +08:00
conn->ssp_mode > 0 && conn->out) {
struct hci_cp_auth_requested cp;
cp.handle = ev->handle;
hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
[Bluetooth] Initiate authentication during connection establishment With Bluetooth 2.1 and Simple Pairing the requirement is that any new connection needs to be authenticated and that encryption has been switched on before allowing L2CAP to use it. So make sure that all the requirements are fulfilled and otherwise drop the connection with a minimal disconnect timeout of 10 milliseconds. This change only affects Bluetooth 2.1 devices and Simple Pairing needs to be enabled locally and in the remote host stack. The previous changes made sure that these information are discovered before any kind of authentication and encryption is triggered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
sizeof(cp), &cp);
} else {
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
[Bluetooth] Use ACL config stage to retrieve remote features The Bluetooth technology introduces new features on a regular basis and for some of them it is important that the hardware on both sides support them. For features like Simple Pairing it is important that the host stacks on both sides have switched this feature on. To make valid decisions, a config stage during ACL link establishment has been introduced that retrieves remote features and if needed also the remote extended features (known as remote host features) before signalling this link as connected. This change introduces full reference counting of incoming and outgoing ACL links and the Bluetooth core will disconnect both if no owner of it is present. To better handle interoperability during the pairing phase the disconnect timeout for incoming connections has been increased to 10 seconds. This is five times more than for outgoing connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:49 +08:00
}
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
}
hci_dev_unlock(hdev);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
}
static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
struct hci_ev_sync_conn_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
[Bluetooth] Support the case when headset falls back to SCO link When trying to establish an eSCO link between two devices then it can happen that the remote device falls back to a SCO link. Currently this case is not handled correctly and the message dispatching will break since it is looking for eSCO packets. So in case the configured link falls back to SCO overwrite the link type with the correct value. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
if (!conn) {
if (ev->link_type == ESCO_LINK)
goto unlock;
conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
if (!conn)
goto unlock;
conn->type = SCO_LINK;
}
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
[Bluetooth] Use a more unique bus name for connections When attaching Bluetooth low-level connections to the bus, the bus name is constructed from the remote address since at that time the connection handle is not assigned yet. This has worked so far, but also caused a lot of troubles. It is better to postpone the creation of the sysfs entry to the time when the connection actually has been established and then use its connection handle as unique identifier. This also fixes the case where two different adapters try to connect to the same remote device. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:51 +08:00
hci_conn_add_sysfs(conn);
[Bluetooth] Add support for handling simple eSCO links With the Bluetooth 1.2 specification the Extended SCO feature for better audio connections was introduced. So far the Bluetooth core wasn't able to handle any eSCO connections correctly. This patch adds simple eSCO support while keeping backward compatibility with older devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 20:55:10 +08:00
} else
conn->state = BT_CLOSED;
hci_proto_connect_cfm(conn, ev->status);
if (ev->status)
hci_conn_del(conn);
unlock:
hci_dev_unlock(hdev);
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
}
static inline void hci_sync_conn_changed_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
BT_DBG("%s", hdev->name);
}
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
static inline void hci_sniff_subrate_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct hci_ev_sniff_subrate *ev = (void *) skb->data;
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
struct hci_conn *conn;
BT_DBG("%s status %d", hdev->name, ev->status);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
if (conn) {
}
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
static inline void hci_extended_inquiry_result_evt(struct hci_dev *hdev, struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
struct inquiry_data data;
struct extended_inquiry_info *info = (void *) (skb->data + 1);
int num_rsp = *((__u8 *) skb->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
BT_DBG("%s num_rsp %d", hdev->name, num_rsp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
if (!num_rsp)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
hci_dev_lock(hdev);
for (; num_rsp; num_rsp--) {
bacpy(&data.bdaddr, &info->bdaddr);
data.pscan_rep_mode = info->pscan_rep_mode;
data.pscan_period_mode = info->pscan_period_mode;
data.pscan_mode = 0x00;
memcpy(data.dev_class, info->dev_class, 3);
data.clock_offset = info->clock_offset;
data.rssi = info->rssi;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
data.ssp_mode = 0x01;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
info++;
hci_inquiry_cache_update(hdev, &data);
}
hci_dev_unlock(hdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Disable disconnect timer during Simple Pairing During the Simple Pairing process the HCI disconnect timer must be disabled. The way to do this is by holding a reference count of the HCI connection. The Simple Pairing process on both sides starts with an IO Capabilities Request and ends with Simple Pairing Complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
static inline void hci_io_capa_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_io_capa_request *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn)
hci_conn_hold(conn);
hci_dev_unlock(hdev);
}
static inline void hci_simple_pair_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_simple_pair_complete *ev = (void *) skb->data;
struct hci_conn *conn;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
if (conn)
hci_conn_put(conn);
hci_dev_unlock(hdev);
}
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
static inline void hci_remote_host_features_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_remote_host_features *ev = (void *) skb->data;
struct inquiry_entry *ie;
BT_DBG("%s", hdev->name);
hci_dev_lock(hdev);
if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr)))
ie->data.ssp_mode = (ev->features[0] & 0x01);
hci_dev_unlock(hdev);
}
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_event_hdr *hdr = (void *) skb->data;
__u8 event = hdr->evt;
skb_pull(skb, HCI_EVENT_HDR_SIZE);
switch (event) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case HCI_EV_INQUIRY_COMPLETE:
hci_inquiry_complete_evt(hdev, skb);
break;
case HCI_EV_INQUIRY_RESULT:
hci_inquiry_result_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_CONN_COMPLETE:
hci_conn_complete_evt(hdev, skb);
[Bluetooth] Add support for extended inquiry responses This patch adds the handling of the extended inquiry responses and inserts them into the inquiry cache. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-09-13 07:32:25 +08:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case HCI_EV_CONN_REQUEST:
hci_conn_request_evt(hdev, skb);
break;
case HCI_EV_DISCONN_COMPLETE:
hci_disconn_complete_evt(hdev, skb);
break;
case HCI_EV_AUTH_COMPLETE:
hci_auth_complete_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_REMOTE_NAME:
hci_remote_name_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case HCI_EV_ENCRYPT_CHANGE:
hci_encrypt_change_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_CHANGE_LINK_KEY_COMPLETE:
hci_change_link_key_complete_evt(hdev, skb);
break;
case HCI_EV_REMOTE_FEATURES:
hci_remote_features_evt(hdev, skb);
break;
case HCI_EV_REMOTE_VERSION:
hci_remote_version_evt(hdev, skb);
break;
case HCI_EV_QOS_SETUP_COMPLETE:
hci_qos_setup_complete_evt(hdev, skb);
break;
case HCI_EV_CMD_COMPLETE:
hci_cmd_complete_evt(hdev, skb);
break;
case HCI_EV_CMD_STATUS:
hci_cmd_status_evt(hdev, skb);
break;
case HCI_EV_ROLE_CHANGE:
hci_role_change_evt(hdev, skb);
break;
case HCI_EV_NUM_COMP_PKTS:
hci_num_comp_pkts_evt(hdev, skb);
break;
case HCI_EV_MODE_CHANGE:
hci_mode_change_evt(hdev, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case HCI_EV_PIN_CODE_REQ:
hci_pin_code_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_REQ:
hci_link_key_request_evt(hdev, skb);
break;
case HCI_EV_LINK_KEY_NOTIFY:
hci_link_key_notify_evt(hdev, skb);
break;
case HCI_EV_CLOCK_OFFSET:
hci_clock_offset_evt(hdev, skb);
break;
[Bluetooth] Track connection packet type changes The connection packet type can be changed after the connection has been established and thus needs to be properly tracked to ensure that the host stack has always correct and valid information about it. On incoming connections the Bluetooth core switches the supported packet types to the configured list for this controller. However the usefulness of this feature has been questioned a lot. The general consent is that every Bluetooth host stack should enable as many packet types as the hardware actually supports and leave the decision to the link manager software running on the Bluetooth chip. When running on Bluetooth 2.0 or later hardware, don't change the packet type for incoming connections anymore. This hardware likely supports Enhanced Data Rate and thus leave it completely up to the link manager to pick the best packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:46 +08:00
case HCI_EV_PKT_TYPE_CHANGE:
hci_pkt_type_change_evt(hdev, skb);
break;
[Bluetooth]: Track page scan repetition mode changes The HCI page scan repetition mode change event contains the actual page scan repetition mode for the remote device. It is the same value that is received from an inquiry response and it can be used to make further reconnections faster. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:28:02 +08:00
case HCI_EV_PSCAN_REP_MODE:
hci_pscan_rep_mode_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_INQUIRY_RESULT_WITH_RSSI:
hci_inquiry_result_with_rssi_evt(hdev, skb);
[Bluetooth] Add automatic sniff mode support This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by: Ulisses Furquim <ulissesf@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2006-07-03 16:02:33 +08:00
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_REMOTE_EXT_FEATURES:
hci_remote_ext_features_evt(hdev, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_SYNC_CONN_COMPLETE:
hci_sync_conn_complete_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_SYNC_CONN_CHANGED:
hci_sync_conn_changed_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_SNIFF_SUBRATE:
hci_sniff_subrate_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
case HCI_EV_EXTENDED_INQUIRY_RESULT:
hci_extended_inquiry_result_evt(hdev, skb);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[Bluetooth] Disable disconnect timer during Simple Pairing During the Simple Pairing process the HCI disconnect timer must be disabled. The way to do this is by holding a reference count of the HCI connection. The Simple Pairing process on both sides starts with an IO Capabilities Request and ends with Simple Pairing Complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
case HCI_EV_IO_CAPA_REQUEST:
hci_io_capa_request_evt(hdev, skb);
break;
case HCI_EV_SIMPLE_PAIR_COMPLETE:
hci_simple_pair_complete_evt(hdev, skb);
break;
[Bluetooth] Track status of remote Simple Pairing mode The Simple Pairing process can only be used if both sides have the support enabled in the host stack. The current Bluetooth specification has three ways to detect this support. If an Extended Inquiry Result has been sent during inquiry then it is safe to assume that Simple Pairing is enabled. It is not allowed to enable Extended Inquiry without Simple Pairing. During the remote name request phase a notification with the remote host supported features will be sent to indicate Simple Pairing support. Also the second page of the remote extended features can indicate support for Simple Pairing. For all three cases the value of remote Simple Pairing mode is stored in the inquiry cache for later use. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-07-15 02:13:48 +08:00
case HCI_EV_REMOTE_HOST_FEATURES:
hci_remote_host_features_evt(hdev, skb);
break;
[Bluetooth] Switch from OGF+OCF to using only opcodes The Bluetooth HCI commands are divided into logical OGF groups for easier identification of their purposes. While this still makes sense for the written specification, its makes the code only more complex and harder to read. So instead of using separate OGF and OCF values to identify the commands, use a common 16-bit opcode that combines both values. As a side effect this also reduces the complexity of OGF and OCF calculations during command header parsing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2007-10-20 19:33:56 +08:00
default:
BT_DBG("%s event 0x%x", hdev->name, event);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
kfree_skb(skb);
hdev->stat.evt_rx++;
}
/* Generate internal stack event */
void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data)
{
struct hci_event_hdr *hdr;
struct hci_ev_stack_internal *ev;
struct sk_buff *skb;
skb = bt_skb_alloc(HCI_EVENT_HDR_SIZE + sizeof(*ev) + dlen, GFP_ATOMIC);
if (!skb)
return;
hdr = (void *) skb_put(skb, HCI_EVENT_HDR_SIZE);
hdr->evt = HCI_EV_STACK_INTERNAL;
hdr->plen = sizeof(*ev) + dlen;
ev = (void *) skb_put(skb, sizeof(*ev) + dlen);
ev->type = type;
memcpy(ev->data, data, dlen);
[Bluetooth] Add direction and timestamp to stack internal events This patch changes the direction to incoming and adds the timestamp to all stack internal events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 18:36:54 +08:00
bt_cb(skb)->incoming = 1;
[NET]: Store skb->timestamp as offset to a base timestamp Reduces skb size by 8 bytes on 64-bit. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-15 08:24:31 +08:00
__net_timestamp(skb);
[Bluetooth] Add direction and timestamp to stack internal events This patch changes the direction to incoming and adds the timestamp to all stack internal events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-08-06 18:36:54 +08:00
[Bluetooth]: Move packet type into the SKB control buffer This patch moves the usage of packet type into the SKB control buffer. After this patch it is now possible to shrink the sk_buff structure and redefine its pkt_type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-10 11:30:28 +08:00
bt_cb(skb)->pkt_type = HCI_EVENT_PKT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
skb->dev = (void *) hdev;
hci_send_to_sock(hdev, skb);
kfree_skb(skb);
}
Copy Permalink