AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
caccdcc5db
kernel_optimize_test/fs/xfs/libxfs/xfs_shared.h

138 lines
5.1 KiB
C
Raw Normal View History

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:14 +08:00
// SPDX-License-Identifier: GPL-2.0
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* Copyright (c) 2013 Red Hat, Inc.
* All Rights Reserved.
*/
#ifndef __XFS_SHARED_H__
#define __XFS_SHARED_H__
/*
* Definitions shared between kernel and userspace that don't fit into any other
* header file that is shared with userspace.
*/
struct xfs_ifork;
struct xfs_buf;
struct xfs_buf_ops;
struct xfs_mount;
struct xfs_trans;
struct xfs_inode;
/*
* Buffer verifier operations are widely used, including userspace tools
*/
extern const struct xfs_buf_ops xfs_agf_buf_ops;
extern const struct xfs_buf_ops xfs_agi_buf_ops;
extern const struct xfs_buf_ops xfs_agf_buf_ops;
extern const struct xfs_buf_ops xfs_agfl_buf_ops;
extern const struct xfs_buf_ops xfs_allocbt_buf_ops;
xfs: define the on-disk rmap btree format Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:36:07 +08:00
extern const struct xfs_buf_ops xfs_rmapbt_buf_ops;
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:18 +08:00
extern const struct xfs_buf_ops xfs_refcountbt_buf_ops;
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
extern const struct xfs_buf_ops xfs_attr3_leaf_buf_ops;
extern const struct xfs_buf_ops xfs_attr3_rmt_buf_ops;
extern const struct xfs_buf_ops xfs_bmbt_buf_ops;
extern const struct xfs_buf_ops xfs_da3_node_buf_ops;
extern const struct xfs_buf_ops xfs_dquot_buf_ops;
extern const struct xfs_buf_ops xfs_symlink_buf_ops;
extern const struct xfs_buf_ops xfs_agi_buf_ops;
extern const struct xfs_buf_ops xfs_inobt_buf_ops;
extern const struct xfs_buf_ops xfs_inode_buf_ops;
extern const struct xfs_buf_ops xfs_inode_buf_ra_ops;
extern const struct xfs_buf_ops xfs_dquot_buf_ops;
xfs: handle dquot buffer readahead in log recovery correctly When we do dquot readahead in log recovery, we do not use a verifier as the underlying buffer may not have dquots in it. e.g. the allocation operation hasn't yet been replayed. Hence we do not want to fail recovery because we detect an operation to be replayed has not been run yet. This problem was addressed for inodes in commit d891400 ("xfs: inode buffers may not be valid during recovery readahead") but the problem was not recognised to exist for dquots and their buffers as the dquot readahead did not have a verifier. The result of not using a verifier is that when the buffer is then next read to replay a dquot modification, the dquot buffer verifier will only be attached to the buffer if *readahead is not complete*. Hence we can read the buffer, replay the dquot changes and then add it to the delwri submission list without it having a verifier attached to it. This then generates warnings in xfs_buf_ioapply(), which catches and warns about this case. Fix this and make it handle the same readahead verifier error cases as for inode buffers by adding a new readahead verifier that has a write operation as well as a read operation that marks the buffer as not done if any corruption is detected. Also make sure we don't run readahead if the dquot buffer has been marked as cancelled by recovery. This will result in readahead either succeeding and the buffer having a valid write verifier, or readahead failing and the buffer state requiring the subsequent read to resubmit the IO with the new verifier. In either case, this will result in the buffer always ending up with a valid write verifier on it. Note: we also need to fix the inode buffer readahead error handling to mark the buffer with EIO. Brian noticed the code I copied from there wrong during review, so fix it at the same time. Add comments linking the two functions that handle readahead verifier errors together so we don't forget this behavioural link in future. cc: <stable@vger.kernel.org> # 3.12 - current Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-12 04:04:01 +08:00
extern const struct xfs_buf_ops xfs_dquot_buf_ra_ops;
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
extern const struct xfs_buf_ops xfs_sb_buf_ops;
extern const struct xfs_buf_ops xfs_sb_quiet_buf_ops;
extern const struct xfs_buf_ops xfs_symlink_buf_ops;
xfs: RT bitmap and summary buffers need verifiers Buffers without verifiers issue runtime warnings on XFS. We don't have anything we can actually verify in the RT buffers (no CRCs, not magic numbers, etc), but we still need verifiers to avoid the warnings. Add a set of dummy verifier operations for the realtime buffers and apply them in the appropriate places. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-09 13:41:45 +08:00
extern const struct xfs_buf_ops xfs_rtbuf_ops;
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
/* log size calculation functions */
int xfs_log_calc_unit_res(struct xfs_mount *mp, int unit_bytes);
int xfs_log_calc_minimum_size(struct xfs_mount *);
xfs: trace log reservations at mount time At each mount, emit the transaction reservation type information via tracepoints. This makes it easier to compare the log reservation info calculated by the kernel and xfsprogs so that we can more easily diagnose minimum log size failures on freshly formatted filesystems. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-01-09 02:51:26 +08:00
struct xfs_trans_res;
void xfs_log_get_max_trans_res(struct xfs_mount *mp,
struct xfs_trans_res *max_resp);
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
/*
* Values for t_flags.
*/
#define XFS_TRANS_DIRTY 0x01 /* something needs to be logged */
#define XFS_TRANS_SB_DIRTY 0x02 /* superblock is modified */
#define XFS_TRANS_PERM_LOG_RES 0x04 /* xact took a permanent log res */
#define XFS_TRANS_SYNC 0x08 /* make commit synchronous */
#define XFS_TRANS_DQ_DIRTY 0x10 /* at least one dquot in trx dirty */
#define XFS_TRANS_RESERVE 0x20 /* OK to use reserved data blocks */
xfs: better xfs_trans_alloc interface Merge xfs_trans_reserve and xfs_trans_alloc into a single function call that returns a transaction with all the required log and block reservations, and which allows passing transaction flags directly to avoid the cumbersome _xfs_trans_alloc interface. While we're at it we also get rid of the transaction type argument that has been superflous since we stopped supporting the non-CIL logging mode. The guts of it will be removed in another patch. [dchinner: fixed transaction leak in error path in xfs_setattr_nonsize] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-06 07:19:55 +08:00
#define XFS_TRANS_NO_WRITECOUNT 0x40 /* do not elevate SB writecount */
#define XFS_TRANS_NOFS 0x80 /* pass KM_NOFS to kmem_alloc */
xfs: replace dop_low with transaction flag The dop_low field enables the low free space allocation mode when a previous allocation has detected difficulty allocating blocks. It has historically been part of the xfs_defer_ops structure, which means if enabled, it remains enabled across a set of transactions until the deferred operations have completed and the dfops is reset. Now that the dfops is embedded in the transaction, we can save a bit more space by using a transaction flag rather than a standalone boolean. Drop the ->dop_low field and replace it with a transaction flag that is set at the same points, carried across rolling transactions and cleared on completion of deferred operations. This essentially emulates the behavior of ->dop_low and so should not change behavior. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-08-01 22:20:31 +08:00
/*
* LOWMODE is used by the allocator to activate the lowspace algorithm - when
* free space is running low the extent allocator may choose to allocate an
* extent from an AG without leaving sufficient space for a btree split when
* inserting the new extent. In this case the allocator will enable the
* lowspace algorithm which is supposed to allow further allocations (such as
* btree splits and newroots) to allocate from sequential AGs. In order to
* avoid locking AGs out of order the lowspace algorithm will start searching
* for free space from AG 0. If the correct transaction reservations have been
* made then this algorithm will eventually find all the space it needs.
*/
#define XFS_TRANS_LOWMODE 0x100 /* allocate in low space mode */
xfs: better xfs_trans_alloc interface Merge xfs_trans_reserve and xfs_trans_alloc into a single function call that returns a transaction with all the required log and block reservations, and which allows passing transaction flags directly to avoid the cumbersome _xfs_trans_alloc interface. While we're at it we also get rid of the transaction type argument that has been superflous since we stopped supporting the non-CIL logging mode. The guts of it will be removed in another patch. [dchinner: fixed transaction leak in error path in xfs_setattr_nonsize] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-06 07:19:55 +08:00
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
/*
* Field values for xfs_trans_mod_sb.
*/
#define XFS_TRANS_SB_ICOUNT 0x00000001
#define XFS_TRANS_SB_IFREE 0x00000002
#define XFS_TRANS_SB_FDBLOCKS 0x00000004
#define XFS_TRANS_SB_RES_FDBLOCKS 0x00000008
#define XFS_TRANS_SB_FREXTENTS 0x00000010
#define XFS_TRANS_SB_RES_FREXTENTS 0x00000020
#define XFS_TRANS_SB_DBLOCKS 0x00000040
#define XFS_TRANS_SB_AGCOUNT 0x00000080
#define XFS_TRANS_SB_IMAXPCT 0x00000100
#define XFS_TRANS_SB_REXTSIZE 0x00000200
#define XFS_TRANS_SB_RBMBLOCKS 0x00000400
#define XFS_TRANS_SB_RBLOCKS 0x00000800
#define XFS_TRANS_SB_REXTENTS 0x00001000
#define XFS_TRANS_SB_REXTSLOG 0x00002000
/*
* Here we centralize the specification of XFS meta-data buffer reference count
* values. This determines how hard the buffer cache tries to hold onto the
* buffer.
*/
#define XFS_AGF_REF 4
#define XFS_AGI_REF 4
#define XFS_AGFL_REF 3
#define XFS_INO_BTREE_REF 3
#define XFS_ALLOC_BTREE_REF 2
#define XFS_BMAP_BTREE_REF 2
xfs: define the on-disk rmap btree format Originally-From: Dave Chinner <dchinner@redhat.com> Now we have all the surrounding call infrastructure in place, we can start filling out the rmap btree implementation. Start with the on-disk btree format; add everything needed to read, write and manipulate rmap btree blocks. This prepares the way for adding the btree operations implementation. [darrick: record owner and offset info in rmap btree] [darrick: fork, bmbt and unwritten state in rmap btree] [darrick: flags are a separate field in xfs_rmap_irec] [darrick: calculate maxlevels separately] [darrick: move the 'unwritten' bit into unused parts of rm_offset] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:36:07 +08:00
#define XFS_RMAP_BTREE_REF 2
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
#define XFS_DIR_BTREE_REF 2
#define XFS_INO_REF 2
#define XFS_ATTR_BTREE_REF 1
#define XFS_DQUOT_REF 1
xfs: define the on-disk refcount btree format Start constructing the refcount btree implementation by establishing the on-disk format and everything needed to read, write, and manipulate the refcount btree blocks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-10-04 00:11:18 +08:00
#define XFS_REFC_BTREE_REF 1
xfs: superblock scrub should use short-lived buffers Secondary superblocks are rarely used, so create a helper to read a given non-primary AG's superblock and ensure that it won't stick around hogging memory. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-05-14 21:34:31 +08:00
#define XFS_SSB_REF 0
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
/*
* Flags for xfs_trans_ichgtime().
*/
#define XFS_ICHGTIME_MOD 0x1 /* data fork modification timestamp */
#define XFS_ICHGTIME_CHG 0x2 /* inode field change timestamp */
#define XFS_ICHGTIME_CREATE 0x4 /* inode create timestamp */
/*
* Symlink decoding/encoding functions
*/
int xfs_symlink_blocks(struct xfs_mount *mp, int pathlen);
int xfs_symlink_hdr_set(struct xfs_mount *mp, xfs_ino_t ino, uint32_t offset,
uint32_t size, struct xfs_buf *bp);
xfs: remove unused xfs_mount arg from xfs_symlink_hdr_ok() Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-14 17:05:43 +08:00
bool xfs_symlink_hdr_ok(xfs_ino_t ino, uint32_t offset,
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
uint32_t size, struct xfs_buf *bp);
void xfs_symlink_local_to_remote(struct xfs_trans *tp, struct xfs_buf *bp,
struct xfs_inode *ip, struct xfs_ifork *ifp);
xfs: create structure verifier function for short form symlinks Create a function to check the structure of short form symlink targets. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-01-09 02:51:05 +08:00
xfs_failaddr_t xfs_symlink_shortform_verify(struct xfs_inode *ip);
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
#endif /* __XFS_SHARED_H__ */
Copy Permalink