AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
d7f2ff6718
kernel_optimize_test/fs/hfsplus/wrapper.c

238 lines
5.8 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/fs/hfsplus/wrapper.c
*
* Copyright (C) 2001
* Brad Boyer (flar@allandria.com)
* (C) 2003 Ardis Technologies <roman@ardistech.com>
*
* Handling of HFS wrappers around HFS+ volumes
*/
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/cdrom.h>
#include <linux/genhd.h>
#include <asm/unaligned.h>
#include "hfsplus_fs.h"
#include "hfsplus_raw.h"
struct hfsplus_wd {
u32 ablk_size;
u16 ablk_start;
u16 embed_start;
u16 embed_count;
};
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
static void hfsplus_end_io_sync(struct bio *bio, int err)
{
if (err)
clear_bit(BIO_UPTODATE, &bio->bi_flags);
complete(bio->bi_private);
}
int hfsplus_submit_bio(struct block_device *bdev, sector_t sector,
void *data, int rw)
{
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_sector = sector;
bio->bi_bdev = bdev;
bio->bi_end_io = hfsplus_end_io_sync;
bio->bi_private = &wait;
/*
* We always submit one sector at a time, so bio_add_page must not fail.
*/
if (bio_add_page(bio, virt_to_page(data), HFSPLUS_SECTOR_SIZE,
offset_in_page(data)) != HFSPLUS_SECTOR_SIZE)
BUG();
submit_bio(rw, bio);
wait_for_completion(&wait);
if (!bio_flagged(bio, BIO_UPTODATE))
return -EIO;
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int hfsplus_read_mdb(void *bufptr, struct hfsplus_wd *wd)
{
u32 extent;
u16 attrib;
[PATCH] hfs: add HFSX support Add support for HFSX, which allows for case-sensitive filenames. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:43:08 +08:00
__be16 sig;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] hfs: add HFSX support Add support for HFSX, which allows for case-sensitive filenames. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:43:08 +08:00
sig = *(__be16 *)(bufptr + HFSP_WRAPOFF_EMBEDSIG);
if (sig != cpu_to_be16(HFSPLUS_VOLHEAD_SIG) &&
sig != cpu_to_be16(HFSPLUS_VOLHEAD_SIGX))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
attrib = be16_to_cpu(*(__be16 *)(bufptr + HFSP_WRAPOFF_ATTRIB));
if (!(attrib & HFSP_WRAP_ATTRIB_SLOCK) ||
!(attrib & HFSP_WRAP_ATTRIB_SPARED))
return 0;
hfsplus: over 80 character lines clean-up Match coding style line length limitation where checkpatch.pl reported over-80-character-line warnings. Signed-off-by: Anton Salikhmetov <alexo@tuxera.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-12-17 00:08:38 +08:00
wd->ablk_size =
be32_to_cpu(*(__be32 *)(bufptr + HFSP_WRAPOFF_ABLKSIZE));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (wd->ablk_size < HFSPLUS_SECTOR_SIZE)
return 0;
if (wd->ablk_size % HFSPLUS_SECTOR_SIZE)
return 0;
hfsplus: over 80 character lines clean-up Match coding style line length limitation where checkpatch.pl reported over-80-character-line warnings. Signed-off-by: Anton Salikhmetov <alexo@tuxera.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-12-17 00:08:38 +08:00
wd->ablk_start =
be16_to_cpu(*(__be16 *)(bufptr + HFSP_WRAPOFF_ABLKSTART));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hfsplus: use get/put_unaligned_* helpers Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 16:03:44 +08:00
extent = get_unaligned_be32(bufptr + HFSP_WRAPOFF_EMBEDEXT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
wd->embed_start = (extent >> 16) & 0xFFFF;
wd->embed_count = extent & 0xFFFF;
return 1;
}
static int hfsplus_get_last_session(struct super_block *sb,
sector_t *start, sector_t *size)
{
struct cdrom_multisession ms_info;
struct cdrom_tocentry te;
int res;
/* default values */
*start = 0;
*size = sb->s_bdev->bd_inode->i_size >> 9;
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
if (HFSPLUS_SB(sb)->session >= 0) {
te.cdte_track = HFSPLUS_SB(sb)->session;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
te.cdte_format = CDROM_LBA;
hfsplus: over 80 character lines clean-up Match coding style line length limitation where checkpatch.pl reported over-80-character-line warnings. Signed-off-by: Anton Salikhmetov <alexo@tuxera.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-12-17 00:08:38 +08:00
res = ioctl_by_bdev(sb->s_bdev,
CDROMREADTOCENTRY, (unsigned long)&te);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!res && (te.cdte_ctrl & CDROM_DATA_TRACK) == 4) {
*start = (sector_t)te.cdte_addr.lba << 2;
return 0;
}
[PATCH] hfs: cleanup HFS+ prints Add the log level and a "hfs: " prefix to all kernel prints. (HFS and HFS+ will use the same prefix, as they share some code and could be merged at some point.) Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-19 09:43:05 +08:00
printk(KERN_ERR "hfs: invalid session number or type of track\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return -EINVAL;
}
ms_info.addr_format = CDROM_LBA;
hfsplus: over 80 character lines clean-up Match coding style line length limitation where checkpatch.pl reported over-80-character-line warnings. Signed-off-by: Anton Salikhmetov <alexo@tuxera.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-12-17 00:08:38 +08:00
res = ioctl_by_bdev(sb->s_bdev, CDROMMULTISESSION,
(unsigned long)&ms_info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!res && ms_info.xa_flag)
*start = (sector_t)ms_info.addr.lba << 2;
return 0;
}
/* Find the volume header and fill in some minimum bits in superblock */
/* Takes in super block, returns true if good data read */
int hfsplus_read_wrapper(struct super_block *sb)
{
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct hfsplus_wd wd;
sector_t part_start, part_size;
u32 blocksize;
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
int error = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
error = -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
blocksize = sb_min_blocksize(sb, HFSPLUS_SECTOR_SIZE);
if (!blocksize)
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (hfsplus_get_last_session(sb, &part_start, &part_size))
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
goto out;
hfsplus: refuse to mount volumes larger than 2TB As found in <http://bugs.debian.org/550010>, hfsplus is using type u32 rather than sector_t for some sector number calculations. In particular, hfsplus_get_block() does: u32 ablock, dblock, mask; ... map_bh(bh_result, sb, (dblock << HFSPLUS_SB(sb).fs_shift) + HFSPLUS_SB(sb).blockoffset + (iblock & mask)); I am not confident that I can find and fix all cases where a sector number may be truncated. For now, avoid data loss by refusing to mount HFS+ volumes with more than 2^32 sectors (2TB). [akpm@linux-foundation.org: fix 32 and 64-bit issues] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Eric Sesterhenn <snakebyte@gmx.de> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 07:49:51 +08:00
if ((u64)part_start + part_size > 0x100000000ULL) {
pr_err("hfs: volumes larger than 2TB are not supported yet\n");
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
goto out;
hfsplus: refuse to mount volumes larger than 2TB As found in <http://bugs.debian.org/550010>, hfsplus is using type u32 rather than sector_t for some sector number calculations. In particular, hfsplus_get_block() does: u32 ablock, dblock, mask; ... map_bh(bh_result, sb, (dblock << HFSPLUS_SB(sb).fs_shift) + HFSPLUS_SB(sb).blockoffset + (iblock & mask)); I am not confident that I can find and fix all cases where a sector number may be truncated. For now, avoid data loss by refusing to mount HFS+ volumes with more than 2^32 sectors (2TB). [akpm@linux-foundation.org: fix 32 and 64-bit issues] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Eric Sesterhenn <snakebyte@gmx.de> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-27 07:49:51 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
error = -ENOMEM;
sbi->s_vhdr = kmalloc(HFSPLUS_SECTOR_SIZE, GFP_KERNEL);
if (!sbi->s_vhdr)
goto out;
sbi->s_backup_vhdr = kmalloc(HFSPLUS_SECTOR_SIZE, GFP_KERNEL);
if (!sbi->s_backup_vhdr)
goto out_free_vhdr;
reread:
error = hfsplus_submit_bio(sb->s_bdev,
part_start + HFSPLUS_VOLHEAD_SECTOR,
sbi->s_vhdr, READ);
if (error)
goto out_free_backup_vhdr;
error = -EINVAL;
switch (sbi->s_vhdr->signature) {
case cpu_to_be16(HFSPLUS_VOLHEAD_SIGX):
set_bit(HFSPLUS_SB_HFSX, &sbi->flags);
/*FALLTHRU*/
case cpu_to_be16(HFSPLUS_VOLHEAD_SIG):
break;
case cpu_to_be16(HFSP_WRAP_MAGIC):
if (!hfsplus_read_mdb(sbi->s_vhdr, &wd))
hfsplus: fix two memory leaks in wrapper.c Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2011-02-02 23:55:06 +08:00
goto out_free_backup_vhdr;
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
wd.ablk_size >>= HFSPLUS_SECTOR_SHIFT;
part_start += wd.ablk_start + wd.embed_start * wd.ablk_size;
part_size = wd.embed_count * wd.ablk_size;
goto reread;
default:
/*
* Check for a partition block.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* (should do this only for cdrom/loop though)
*/
if (hfs_part_find(sb, &part_start, &part_size))
hfsplus: fix two memory leaks in wrapper.c Signed-Off-By: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2011-02-02 23:55:06 +08:00
goto out_free_backup_vhdr;
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
goto reread;
}
error = hfsplus_submit_bio(sb->s_bdev,
part_start + part_size - 2,
sbi->s_backup_vhdr, READ);
if (error)
goto out_free_backup_vhdr;
error = -EINVAL;
if (sbi->s_backup_vhdr->signature != sbi->s_vhdr->signature) {
printk(KERN_WARNING
"hfs: invalid secondary volume header\n");
goto out_free_backup_vhdr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
blocksize = be32_to_cpu(sbi->s_vhdr->blocksize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
/*
* Block size must be at least as large as a sector and a multiple of 2.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
if (blocksize < HFSPLUS_SECTOR_SIZE || ((blocksize - 1) & blocksize))
goto out_free_backup_vhdr;
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
sbi->alloc_blksz = blocksize;
sbi->alloc_blksz_shift = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while ((blocksize >>= 1) != 0)
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
sbi->alloc_blksz_shift++;
blocksize = min(sbi->alloc_blksz, (u32)PAGE_SIZE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
/*
* Align block size to block offset.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while (part_start & ((blocksize >> HFSPLUS_SECTOR_SHIFT) - 1))
blocksize >>= 1;
if (sb_set_blocksize(sb, blocksize) != blocksize) {
hfsplus: over 80 character lines clean-up Match coding style line length limitation where checkpatch.pl reported over-80-character-line warnings. Signed-off-by: Anton Salikhmetov <alexo@tuxera.com> Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-12-17 00:08:38 +08:00
printk(KERN_ERR "hfs: unable to set blocksize to %u!\n",
blocksize);
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
goto out_free_backup_vhdr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
sbi->blockoffset =
part_start >> (sb->s_blocksize_bits - HFSPLUS_SECTOR_SHIFT);
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
sbi->part_start = part_start;
hfsplus: fix HFSPLUS_SB calling convention HFSPLUS_SB doesn't return a pointer to the hfsplus-specific superblock information like all other FOO_SB macros, but dereference the pointer in a way that made it look like a direct struct derefence. This only works as long as the HFSPLUS_SB macro is used directly and prevents us from keepig a local hfsplus_sb_info pointer. Fix the calling convention and introduce a local sbi variable in all functions that use it constantly. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-10-01 11:42:59 +08:00
sbi->sect_count = part_size;
sbi->fs_shift = sbi->alloc_blksz_shift - sb->s_blocksize_bits;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return 0;
hfsplus: use raw bio access for the volume headers The hfsplus backup volume header is located two blocks from the end of the device. In case of device sizes that are not 4k aligned this means we can't access it using buffer_heads when using the default 4k block size. Switch to using raw bios to read/write all buffer headers. We were not relying on any caching behaviour of the buffer heads anyway. Additionally always read in the backup volume header during mount to verify that we can actually read it. Signed-off-by: Christoph Hellwig <hch@tuxera.com>
2010-11-23 21:37:47 +08:00
out_free_backup_vhdr:
kfree(sbi->s_backup_vhdr);
out_free_vhdr:
kfree(sbi->s_vhdr);
out:
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
Copy Permalink