AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
e27a08f53d
kernel_optimize_test/kernel/Kconfig.locks

226 lines
4.3 KiB
Plaintext
Raw Normal View History

locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
#
# The ARCH_INLINE foo is necessary because select ignores "depends on"
#
config ARCH_INLINE_SPIN_TRYLOCK
bool
config ARCH_INLINE_SPIN_TRYLOCK_BH
bool
config ARCH_INLINE_SPIN_LOCK
bool
config ARCH_INLINE_SPIN_LOCK_BH
bool
config ARCH_INLINE_SPIN_LOCK_IRQ
bool
config ARCH_INLINE_SPIN_LOCK_IRQSAVE
bool
config ARCH_INLINE_SPIN_UNLOCK
bool
config ARCH_INLINE_SPIN_UNLOCK_BH
bool
config ARCH_INLINE_SPIN_UNLOCK_IRQ
bool
config ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
bool
config ARCH_INLINE_READ_TRYLOCK
bool
config ARCH_INLINE_READ_LOCK
bool
config ARCH_INLINE_READ_LOCK_BH
bool
config ARCH_INLINE_READ_LOCK_IRQ
bool
config ARCH_INLINE_READ_LOCK_IRQSAVE
bool
config ARCH_INLINE_READ_UNLOCK
bool
config ARCH_INLINE_READ_UNLOCK_BH
bool
config ARCH_INLINE_READ_UNLOCK_IRQ
bool
config ARCH_INLINE_READ_UNLOCK_IRQRESTORE
bool
config ARCH_INLINE_WRITE_TRYLOCK
bool
config ARCH_INLINE_WRITE_LOCK
bool
config ARCH_INLINE_WRITE_LOCK_BH
bool
config ARCH_INLINE_WRITE_LOCK_IRQ
bool
config ARCH_INLINE_WRITE_LOCK_IRQSAVE
bool
config ARCH_INLINE_WRITE_UNLOCK
bool
config ARCH_INLINE_WRITE_UNLOCK_BH
bool
config ARCH_INLINE_WRITE_UNLOCK_IRQ
bool
config ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
bool
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
config UNINLINE_SPIN_UNLOCK
bool
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
#
# lock_* functions are inlined when:
# - DEBUG_SPINLOCK=n and GENERIC_LOCKBREAK=n and ARCH_INLINE_*LOCK=y
#
# trylock_* functions are inlined when:
# - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
#
# unlock and unlock_irq functions are inlined when:
# - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
# or
# - DEBUG_SPINLOCK=n and PREEMPT=n
#
# unlock_bh and unlock_irqrestore functions are inlined when:
# - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
#
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
if !DEBUG_SPINLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_TRYLOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_SPIN_TRYLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_TRYLOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_SPIN_TRYLOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_LOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_LOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_LOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_LOCK_IRQSAVE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK_IRQSAVE
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_UNLOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_SPIN_UNLOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_UNLOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH" The Kconfig symbols ARCH_INLINE_READ_UNLOCK_IRQ, ARCH_INLINE_SPIN_UNLOCK_IRQ, and ARCH_INLINE_WRITE_UNLOCK_IRQ were added in v2.6.33, but have never actually been used. Ingo Molnar spotted that this is caused by three identical copy/paste erros. Eg, the Kconfig entry for INLINE_READ_UNLOCK_IRQ has an (optional) dependency on: ARCH_INLINE_READ_UNLOCK_BH were it apparently should depend on: ARCH_INLINE_READ_UNLOCK_IRQ instead. Likewise for the Kconfig entries for INLINE_SPIN_UNLOCK_IRQ and INLINE_WRITE_UNLOCK_IRQ. Fix these three errors. This never really caused any real problems as these symbols are set (or unset) in a group - but it's worth fixing it nevertheless. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1368780693.1350.228.camel@x61.thuisdomein Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-17 16:51:33 +08:00
depends on !PREEMPT || ARCH_INLINE_SPIN_UNLOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_SPIN_UNLOCK_IRQRESTORE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_TRYLOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_READ_TRYLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_LOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_READ_LOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_LOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_READ_LOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_LOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_READ_LOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_LOCK_IRQSAVE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_READ_LOCK_IRQSAVE
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_UNLOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !PREEMPT || ARCH_INLINE_READ_UNLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_UNLOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_READ_UNLOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_UNLOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH" The Kconfig symbols ARCH_INLINE_READ_UNLOCK_IRQ, ARCH_INLINE_SPIN_UNLOCK_IRQ, and ARCH_INLINE_WRITE_UNLOCK_IRQ were added in v2.6.33, but have never actually been used. Ingo Molnar spotted that this is caused by three identical copy/paste erros. Eg, the Kconfig entry for INLINE_READ_UNLOCK_IRQ has an (optional) dependency on: ARCH_INLINE_READ_UNLOCK_BH were it apparently should depend on: ARCH_INLINE_READ_UNLOCK_IRQ instead. Likewise for the Kconfig entries for INLINE_SPIN_UNLOCK_IRQ and INLINE_WRITE_UNLOCK_IRQ. Fix these three errors. This never really caused any real problems as these symbols are set (or unset) in a group - but it's worth fixing it nevertheless. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1368780693.1350.228.camel@x61.thuisdomein Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-17 16:51:33 +08:00
depends on !PREEMPT || ARCH_INLINE_READ_UNLOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_READ_UNLOCK_IRQRESTORE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_READ_UNLOCK_IRQRESTORE
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_TRYLOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_WRITE_TRYLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_LOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_WRITE_LOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_LOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_WRITE_LOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_LOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_WRITE_LOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_LOCK_IRQSAVE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !GENERIC_LOCKBREAK && ARCH_INLINE_WRITE_LOCK_IRQSAVE
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_UNLOCK
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on !PREEMPT || ARCH_INLINE_WRITE_UNLOCK
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_UNLOCK_BH
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_WRITE_UNLOCK_BH
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_UNLOCK_IRQ
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
locking: Fix copy/paste errors of "ARCH_INLINE_*_UNLOCK_BH" The Kconfig symbols ARCH_INLINE_READ_UNLOCK_IRQ, ARCH_INLINE_SPIN_UNLOCK_IRQ, and ARCH_INLINE_WRITE_UNLOCK_IRQ were added in v2.6.33, but have never actually been used. Ingo Molnar spotted that this is caused by three identical copy/paste erros. Eg, the Kconfig entry for INLINE_READ_UNLOCK_IRQ has an (optional) dependency on: ARCH_INLINE_READ_UNLOCK_BH were it apparently should depend on: ARCH_INLINE_READ_UNLOCK_IRQ instead. Likewise for the Kconfig entries for INLINE_SPIN_UNLOCK_IRQ and INLINE_WRITE_UNLOCK_IRQ. Fix these three errors. This never really caused any real problems as these symbols are set (or unset) in a group - but it's worth fixing it nevertheless. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1368780693.1350.228.camel@x61.thuisdomein Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-17 16:51:33 +08:00
depends on !PREEMPT || ARCH_INLINE_WRITE_UNLOCK_IRQ
locking: Make inlining decision Kconfig based commit 892a7c67 (locking: Allow arch-inlined spinlocks) implements the selection of which lock functions are inlined based on defines in arch/.../spinlock.h: #define __always_inline__LOCK_FUNCTION Despite of the name __always_inline__* the lock functions can be built out of line depending on config options. Also if the arch does not set some inline defines the generic code might set them; again depending on config options. This makes it unnecessary hard to figure out when and which lock functions are inlined. Aside of that it makes it way harder and messier for -rt to manipulate the lock functions. Convert the inlining decision to CONFIG switches. Each lock function is inlined depending on CONFIG_INLINE_*. The configs implement the existing dependencies. The architecture code can select ARCH_INLINE_* to signal that it wants the corresponding lock function inlined. ARCH_INLINE_* is necessary as Kconfig ignores "depends on" restrictions when a config element is selected. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <20091109151428.504477141@linutronix.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-11-09 23:21:34 +08:00
config INLINE_WRITE_UNLOCK_IRQRESTORE
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
endif
mutex: Better control mutex adaptive spinning config Introduce CONFIG_MUTEX_SPIN_ON_OWNER so that we can centralize in a single place the conditions that determine its definition and use. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1259783357-8542-1-git-send-regression-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org>
2009-12-03 03:49:16 +08:00
config MUTEX_SPIN_ON_OWNER
locking: Adjust spin lock inlining Kconfig options Break out the DEBUG_SPINLOCK dependency (requires moving up UNINLINE_SPIN_UNLOCK, as this was the only one in that block not depending on that option). Avoid putting values not selected into the resulting .config - they are not useful for anything, make the output less legible, and just consume space: Use "depends on" rather than directly setting the default from the combined dependency values. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/504DF2AC020000780009A2DF@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-09-10 20:01:16 +08:00
def_bool y
depends on SMP && !DEBUG_MUTEXES
Copy Permalink