AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
e72436bc3a
kernel_optimize_test/drivers/bluetooth/btbcm.h

120 lines
2.5 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:05 +08:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:10 +08:00
/*
*
* Bluetooth support for Broadcom devices
*
* Copyright (C) 2015 Intel Corporation
*/
Bluetooth: hci_uart: Add bcm_set_baudrate() Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09 22:15:37 +08:00
#define BCM_UART_CLOCK_48MHZ 0x01
#define BCM_UART_CLOCK_24MHZ 0x02
struct bcm_update_uart_baud_rate {
__le16 zero;
__le32 baud_rate;
} __packed;
struct bcm_write_uart_clock_setting {
__u8 type;
} __packed;
Bluetooth: btbcm: Support the BCM4354 Bluetooth UART device Support the BCM4354 chip and introduce vendor specific command parameter definitions. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 23:42:46 +08:00
struct bcm_set_sleep_mode {
__u8 sleep_mode;
__u8 idle_host;
__u8 idle_dev;
__u8 bt_wake_active;
__u8 host_wake_active;
__u8 allow_host_sleep;
__u8 combine_modes;
__u8 tristate_control;
__u8 usb_auto_sleep;
__u8 usb_resume_timeout;
__u8 break_to_host;
Bluetooth: btbcm: Fix sleep mode struct ordering According to the documentation for Laird SD40 radio modules (which use the BCM4329 chipset), the order of the Enable_BREAK_To_Host and Pulsed_HOST_WAKE parameters in the sleep mode struct is reversed vis-à-vis our struct declaration. See page 46 of this PDF: http://cdn.lairdtech.com/home/brandworld/files/Application%20Note%20-%2040%20Series%20Bluetooth.pdf The documentation is dated Oct 2015, so fairly recent, making it appear more likely that the documentation is correct and our code is wrong. Amend our code to be in congruence with the documentation. Cc: Sue White <sue.white@lairdtech.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-01-10 23:32:10 +08:00
__u8 pulsed_host_wake;
Bluetooth: btbcm: Support the BCM4354 Bluetooth UART device Support the BCM4354 chip and introduce vendor specific command parameter definitions. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-17 23:42:46 +08:00
} __packed;
struct bcm_set_pcm_int_params {
__u8 routing;
__u8 rate;
__u8 frame_sync;
__u8 sync_mode;
__u8 clock_mode;
} __packed;
struct bcm_set_pcm_format_params {
__u8 lsb_first;
__u8 fill_value;
__u8 fill_method;
__u8 fill_num;
__u8 right_justify;
} __packed;
Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:10 +08:00
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
Bluetooth: btbcm: Move request/release_firmware() Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-28 17:25:01 +08:00
int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
Bluetooth: btbcm: Support pcm configuration Add BCM vendor specific command to configure PCM parameters. The new vendor opcode allows us to set the sco routing, the pcm interface rate, and a few other pcm specific options (frame sync, sync mode, and clock mode). See broadcom-bluetooth.txt in Documentation for more information about valid values for those settings. Here is an example trace where this opcode was used to configure a BCM4354: < HCI Command: Vendor (0x3f|0x001c) plen 5 01 02 00 01 01 > HCI Event: Command Complete (0x0e) plen 4 Vendor (0x3f|0x001c) ncmd 1 Status: Success (0x00) We can read back the values as well with ocf 0x001d to confirm the values that were set: $ hcitool cmd 0x3f 0x001d < HCI Command: ogf 0x3f, ocf 0x001d, plen 0 > HCI Event: 0x0e plen 9 01 1D FC 00 01 02 00 01 01 Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-26 15:17:30 +08:00
int btbcm_read_pcm_int_params(struct hci_dev *hdev,
struct bcm_set_pcm_int_params *params);
int btbcm_write_pcm_int_params(struct hci_dev *hdev,
const struct bcm_set_pcm_int_params *params);
Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:10 +08:00
Bluetooth: btbcm: Add support for Broadcom controller setup To unify the controller setup of Broadcom devices between USB and UART transport, add the patchram download support into the Broadcom module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:13 +08:00
int btbcm_setup_patchram(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
Bluetooth: btbcm: Allow using btbcm_initialize() for reinit btbcm_finalize() does a re-init of the controller, which is almost the same as the initial init. Modify btbcm_initialize() so that it can be used for this re-init and modify btbcm_finalize() to use it. As an added bonus this also makes the dev_info from btbcm_finalize() use the proper hw_name instead of always printing "BCM". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-20 20:44:05 +08:00
int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len,
bool reinit);
Bluetooth: btbcm: Add helper functions for UART setup Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-28 17:25:04 +08:00
int btbcm_finalize(struct hci_dev *hdev);
Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:10 +08:00
#else
static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
}
static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
return -EOPNOTSUPP;
}
Bluetooth: btbcm: Add missing static inline in header This fixes a double definition error when CONFIG_BT_BCM is not set. Fixes: 528379902337 ("Bluetooth: btbcm: Support pcm configuration") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-12-27 03:03:40 +08:00
static inline int btbcm_read_pcm_int_params(struct hci_dev *hdev,
Bluetooth: btbcm: Support pcm configuration Add BCM vendor specific command to configure PCM parameters. The new vendor opcode allows us to set the sco routing, the pcm interface rate, and a few other pcm specific options (frame sync, sync mode, and clock mode). See broadcom-bluetooth.txt in Documentation for more information about valid values for those settings. Here is an example trace where this opcode was used to configure a BCM4354: < HCI Command: Vendor (0x3f|0x001c) plen 5 01 02 00 01 01 > HCI Event: Command Complete (0x0e) plen 4 Vendor (0x3f|0x001c) ncmd 1 Status: Success (0x00) We can read back the values as well with ocf 0x001d to confirm the values that were set: $ hcitool cmd 0x3f 0x001d < HCI Command: ogf 0x3f, ocf 0x001d, plen 0 > HCI Event: 0x0e plen 9 01 1D FC 00 01 02 00 01 01 Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-26 15:17:30 +08:00
struct bcm_set_pcm_int_params *params)
{
return -EOPNOTSUPP;
}
Bluetooth: btbcm: Add missing static inline in header This fixes a double definition error when CONFIG_BT_BCM is not set. Fixes: 528379902337 ("Bluetooth: btbcm: Support pcm configuration") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-12-27 03:03:40 +08:00
static inline int btbcm_write_pcm_int_params(struct hci_dev *hdev,
Bluetooth: btbcm: Support pcm configuration Add BCM vendor specific command to configure PCM parameters. The new vendor opcode allows us to set the sco routing, the pcm interface rate, and a few other pcm specific options (frame sync, sync mode, and clock mode). See broadcom-bluetooth.txt in Documentation for more information about valid values for those settings. Here is an example trace where this opcode was used to configure a BCM4354: < HCI Command: Vendor (0x3f|0x001c) plen 5 01 02 00 01 01 > HCI Event: Command Complete (0x0e) plen 4 Vendor (0x3f|0x001c) ncmd 1 Status: Success (0x00) We can read back the values as well with ocf 0x001d to confirm the values that were set: $ hcitool cmd 0x3f 0x001d < HCI Command: ogf 0x3f, ocf 0x001d, plen 0 > HCI Event: 0x0e plen 9 01 1D FC 00 01 02 00 01 01 Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-11-26 15:17:30 +08:00
const struct bcm_set_pcm_int_params *params)
{
return -EOPNOTSUPP;
}
Bluetooth: btbcm: Move request/release_firmware() Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-28 17:25:01 +08:00
static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
Bluetooth: btbcm: Export patchram download as separate function This isolates the Broadcom patchram download procedure as separate function so that it can be easily used from USB and UART based drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-11 05:02:20 +08:00
{
return -EOPNOTSUPP;
}
Bluetooth: btbcm: Add support for Broadcom controller setup To unify the controller setup of Broadcom devices between USB and UART transport, add the patchram download support into the Broadcom module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:13 +08:00
static inline int btbcm_setup_patchram(struct hci_dev *hdev)
{
return 0;
}
static inline int btbcm_setup_apple(struct hci_dev *hdev)
{
return 0;
}
Bluetooth: btbcm: Add helper functions for UART setup Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-28 17:25:04 +08:00
static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
Bluetooth: btbcm: Allow using btbcm_initialize() for reinit btbcm_finalize() does a re-init of the controller, which is almost the same as the initial init. Modify btbcm_initialize() so that it can be used for this re-init and modify btbcm_finalize() to use it. As an added bonus this also makes the dev_info from btbcm_finalize() use the proper hw_name instead of always printing "BCM". Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-20 20:44:05 +08:00
size_t len, bool reinit)
Bluetooth: btbcm: Add helper functions for UART setup Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-28 17:25:04 +08:00
{
return 0;
}
static inline int btbcm_finalize(struct hci_dev *hdev)
{
return 0;
}
Bluetooth: btbcm: Introduce generic Broadcom Bluetooth support The majority of Broadcom Bluetooth vendor commands are shared between USB and UART transports. This creates a separate module that eventually will hold all Broadcom specific commands, but for now just start with the commands to change the Bluetooth public address and check for the default address. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-04-06 13:52:10 +08:00
#endif
Copy Permalink