forked from luck/tmp_suning_uos_patched
phy: ti-pipe3: fix suspend
Relying on PM-ops for shutting down PHY clocks was a bad idea since the users (e.g. PCIe/SATA) might not have been suspended by then. The main culprit for not shutting down the clocks was the stray pm_runtime_get() call in probe. Fix the whole thing in the right way by getting rid of that pm_runtime_get() call from probe and removing all PM-ops. It is the sole responsibility of the PHY user to properly turn OFF and de-initialize the PHY as part of its suspend routine. As PHY core serializes init/exit we don't need to use a spinlock in this driver. So get rid of it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Roger Quadros
Kishon Vijay Abraham I
parent
d770e558e2
commit
0a0830feb2
|
|
@ -28,7 +28,6 @@
|
|||
#include <linux/delay.h>
|
||||
#include <linux/phy/omap_control_phy.h>
|
||||
#include <linux/of_platform.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#define PLL_STATUS 0x00000004
|
||||
#define PLL_GO 0x00000008
|
||||
|
|
@ -83,10 +82,6 @@ struct ti_pipe3 {
|
|||
struct clk *refclk;
|
||||
struct clk *div_clk;
|
||||
struct pipe3_dpll_map *dpll_map;
|
||||
bool enabled;
|
||||
spinlock_t lock; /* serialize clock enable/disable */
|
||||
/* the below flag is needed specifically for SATA */
|
||||
bool refclk_enabled;
|
||||
};
|
||||
|
||||
static struct pipe3_dpll_map dpll_map_usb[] = {
|
||||
|
|
@ -137,6 +132,9 @@ static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
|
|||
return NULL;
|
||||
}
|
||||
|
||||
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
|
||||
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
|
||||
|
||||
static int ti_pipe3_power_off(struct phy *x)
|
||||
{
|
||||
struct ti_pipe3 *phy = phy_get_drvdata(x);
|
||||
|
|
@ -217,6 +215,7 @@ static int ti_pipe3_init(struct phy *x)
|
|||
u32 val;
|
||||
int ret = 0;
|
||||
|
||||
ti_pipe3_enable_clocks(phy);
|
||||
/*
|
||||
* Set pcie_pcs register to 0x96 for proper functioning of phy
|
||||
* as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
|
||||
|
|
@ -250,33 +249,35 @@ static int ti_pipe3_exit(struct phy *x)
|
|||
u32 val;
|
||||
unsigned long timeout;
|
||||
|
||||
/* SATA DPLL can't be powered down due to Errata i783 and PCIe
|
||||
* does not have internal DPLL
|
||||
*/
|
||||
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") ||
|
||||
of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie"))
|
||||
/* SATA DPLL can't be powered down due to Errata i783 */
|
||||
if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
|
||||
return 0;
|
||||
|
||||
/* Put DPLL in IDLE mode */
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
||||
val |= PLL_IDLE;
|
||||
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
||||
/* PCIe doesn't have internal DPLL */
|
||||
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) {
|
||||
/* Put DPLL in IDLE mode */
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
|
||||
val |= PLL_IDLE;
|
||||
ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
||||
|
||||
/* wait for LDO and Oscillator to power down */
|
||||
timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
|
||||
do {
|
||||
cpu_relax();
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
||||
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
|
||||
break;
|
||||
} while (!time_after(jiffies, timeout));
|
||||
/* wait for LDO and Oscillator to power down */
|
||||
timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
|
||||
do {
|
||||
cpu_relax();
|
||||
val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
|
||||
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
|
||||
break;
|
||||
} while (!time_after(jiffies, timeout));
|
||||
|
||||
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
|
||||
dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
|
||||
val);
|
||||
return -EBUSY;
|
||||
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
|
||||
dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
|
||||
val);
|
||||
return -EBUSY;
|
||||
}
|
||||
}
|
||||
|
||||
ti_pipe3_disable_clocks(phy);
|
||||
|
||||
return 0;
|
||||
}
|
||||
static struct phy_ops ops = {
|
||||
|
|
@ -306,7 +307,6 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
return -ENOMEM;
|
||||
|
||||
phy->dev = &pdev->dev;
|
||||
spin_lock_init(&phy->lock);
|
||||
|
||||
if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
|
||||
match = of_match_device(ti_pipe3_id_table, &pdev->dev);
|
||||
|
|
@ -402,6 +402,10 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
|
||||
platform_set_drvdata(pdev, phy);
|
||||
pm_runtime_enable(phy->dev);
|
||||
/* Prevent auto-disable of refclk for SATA PHY due to Errata i783 */
|
||||
if (of_device_is_compatible(node, "ti,phy-pipe3-sata"))
|
||||
if (!IS_ERR(phy->refclk))
|
||||
clk_prepare_enable(phy->refclk);
|
||||
|
||||
generic_phy = devm_phy_create(phy->dev, NULL, &ops);
|
||||
if (IS_ERR(generic_phy))
|
||||
|
|
@ -413,63 +417,33 @@ static int ti_pipe3_probe(struct platform_device *pdev)
|
|||
if (IS_ERR(phy_provider))
|
||||
return PTR_ERR(phy_provider);
|
||||
|
||||
pm_runtime_get(&pdev->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ti_pipe3_remove(struct platform_device *pdev)
|
||||
{
|
||||
if (!pm_runtime_suspended(&pdev->dev))
|
||||
pm_runtime_put(&pdev->dev);
|
||||
pm_runtime_disable(&pdev->dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int ti_pipe3_enable_refclk(struct ti_pipe3 *phy)
|
||||
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
|
||||
{
|
||||
if (!IS_ERR(phy->refclk) && !phy->refclk_enabled) {
|
||||
int ret;
|
||||
int ret = 0;
|
||||
|
||||
if (!IS_ERR(phy->refclk)) {
|
||||
ret = clk_prepare_enable(phy->refclk);
|
||||
if (ret) {
|
||||
dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
phy->refclk_enabled = true;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ti_pipe3_disable_refclk(struct ti_pipe3 *phy)
|
||||
{
|
||||
if (!IS_ERR(phy->refclk))
|
||||
clk_disable_unprepare(phy->refclk);
|
||||
|
||||
phy->refclk_enabled = false;
|
||||
}
|
||||
|
||||
static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
|
||||
{
|
||||
int ret = 0;
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&phy->lock, flags);
|
||||
if (phy->enabled)
|
||||
goto err1;
|
||||
|
||||
ret = ti_pipe3_enable_refclk(phy);
|
||||
if (ret)
|
||||
goto err1;
|
||||
|
||||
if (!IS_ERR(phy->wkupclk)) {
|
||||
ret = clk_prepare_enable(phy->wkupclk);
|
||||
if (ret) {
|
||||
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
|
||||
goto err2;
|
||||
goto disable_refclk;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -477,96 +451,33 @@ static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
|
|||
ret = clk_prepare_enable(phy->div_clk);
|
||||
if (ret) {
|
||||
dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
|
||||
goto err3;
|
||||
goto disable_wkupclk;
|
||||
}
|
||||
}
|
||||
|
||||
phy->enabled = true;
|
||||
spin_unlock_irqrestore(&phy->lock, flags);
|
||||
return 0;
|
||||
|
||||
err3:
|
||||
disable_wkupclk:
|
||||
if (!IS_ERR(phy->wkupclk))
|
||||
clk_disable_unprepare(phy->wkupclk);
|
||||
|
||||
err2:
|
||||
disable_refclk:
|
||||
if (!IS_ERR(phy->refclk))
|
||||
clk_disable_unprepare(phy->refclk);
|
||||
|
||||
ti_pipe3_disable_refclk(phy);
|
||||
err1:
|
||||
spin_unlock_irqrestore(&phy->lock, flags);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&phy->lock, flags);
|
||||
if (!phy->enabled) {
|
||||
spin_unlock_irqrestore(&phy->lock, flags);
|
||||
return;
|
||||
}
|
||||
|
||||
if (!IS_ERR(phy->wkupclk))
|
||||
clk_disable_unprepare(phy->wkupclk);
|
||||
/* Don't disable refclk for SATA PHY due to Errata i783 */
|
||||
if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata"))
|
||||
ti_pipe3_disable_refclk(phy);
|
||||
if (!IS_ERR(phy->refclk))
|
||||
clk_disable_unprepare(phy->refclk);
|
||||
if (!IS_ERR(phy->div_clk))
|
||||
clk_disable_unprepare(phy->div_clk);
|
||||
phy->enabled = false;
|
||||
spin_unlock_irqrestore(&phy->lock, flags);
|
||||
}
|
||||
|
||||
static int ti_pipe3_runtime_suspend(struct device *dev)
|
||||
{
|
||||
struct ti_pipe3 *phy = dev_get_drvdata(dev);
|
||||
|
||||
ti_pipe3_disable_clocks(phy);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ti_pipe3_runtime_resume(struct device *dev)
|
||||
{
|
||||
struct ti_pipe3 *phy = dev_get_drvdata(dev);
|
||||
int ret = 0;
|
||||
|
||||
ret = ti_pipe3_enable_clocks(phy);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ti_pipe3_suspend(struct device *dev)
|
||||
{
|
||||
struct ti_pipe3 *phy = dev_get_drvdata(dev);
|
||||
|
||||
ti_pipe3_disable_clocks(phy);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ti_pipe3_resume(struct device *dev)
|
||||
{
|
||||
struct ti_pipe3 *phy = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = ti_pipe3_enable_clocks(phy);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pm_runtime_disable(dev);
|
||||
pm_runtime_set_active(dev);
|
||||
pm_runtime_enable(dev);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static const struct dev_pm_ops ti_pipe3_pm_ops = {
|
||||
SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend,
|
||||
ti_pipe3_runtime_resume, NULL)
|
||||
SET_SYSTEM_SLEEP_PM_OPS(ti_pipe3_suspend, ti_pipe3_resume)
|
||||
};
|
||||
|
||||
static const struct of_device_id ti_pipe3_id_table[] = {
|
||||
{
|
||||
.compatible = "ti,phy-usb3",
|
||||
|
|
@ -592,7 +503,6 @@ static struct platform_driver ti_pipe3_driver = {
|
|||
.remove = ti_pipe3_remove,
|
||||
.driver = {
|
||||
.name = "ti-pipe3",
|
||||
.pm = &ti_pipe3_pm_ops,
|
||||
.of_match_table = ti_pipe3_id_table,
|
||||
},
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user