AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge with rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Browse Source
This commit is contained in:
Steve French 2005-06-06 09:57:33 -07:00
commit 0b68177ccd
56 changed files with 2350 additions and 1335 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

158
Documentation/DocBook/libata.tmpl
View File

@ -14,7 +14,7 @@
</authorgroup>
<copyright>
<year>2003</year>
<year>2003-2005</year>
<holder>Jeff Garzik</holder>
</copyright>
@ -44,30 +44,38 @@
<toc></toc>
<chapter id="libataThanks">
<title>Thanks</title>
<chapter id="libataIntroduction">
<title>Introduction</title>
<para>
The bulk of the ATA knowledge comes thanks to long conversations with
Andre Hedrick (www.linux-ide.org).
libATA is a library used inside the Linux kernel to support ATA host
controllers and devices. libATA provides an ATA driver API, class
transports for ATA and ATAPI devices, and SCSI&lt;-&gt;ATA translation
for ATA devices according to the T10 SAT specification.
</para>
<para>
Thanks to Alan Cox for pointing out similarities
between SATA and SCSI, and in general for motivation to hack on
libata.
</para>
<para>
libata's device detection
method, ata_pio_devchk, and in general all the early probing was
based on extensive study of Hale Landis's probe/reset code in his
ATADRVR driver (www.ata-atapi.com).
This Guide documents the libATA driver API, library functions, library
internals, and a couple sample ATA low-level drivers.
</para>
</chapter>
<chapter id="libataDriverApi">
<title>libata Driver API</title>
<para>
struct ata_port_operations is defined for every low-level libata
hardware driver, and it controls how the low-level driver
interfaces with the ATA and SCSI layers.
</para>
<para>
FIS-based drivers will hook into the system with ->qc_prep() and
->qc_issue() high-level hooks. Hardware which behaves in a manner
similar to PCI IDE hardware may utilize several generic helpers,
defining at a bare minimum the bus I/O addresses of the ATA shadow
register blocks.
</para>
<sect1>
<title>struct ata_port_operations</title>
<sect2><title>Disable ATA port</title>
<programlisting>
void (*port_disable) (struct ata_port *);
</programlisting>
@ -78,6 +86,9 @@ void (*port_disable) (struct ata_port *);
unplug).
</para>
</sect2>
<sect2><title>Post-IDENTIFY device configuration</title>
<programlisting>
void (*dev_config) (struct ata_port *, struct ata_device *);
</programlisting>
@ -88,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
</sect2>
<sect2><title>Set PIO/DMA mode</title>
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
@ -108,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap);
->set_dma_mode() is only called if DMA is possible.
</para>
</sect2>
<sect2><title>Taskfile read/write</title>
<programlisting>
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@ -120,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
taskfile register values.
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
@ -129,17 +149,37 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
->tf_load(), to be initiated in hardware.
</para>
</sect2>
<sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
<programlisting>
u8 (*check_status)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
</programlisting>
<para>
Reads the Status ATA shadow register from hardware. On some
hardware, this has the side effect of clearing the interrupt
condition.
Allow low-level driver to filter ATA PACKET commands, returning a status
indicating whether or not it is OK to use DMA for the supplied PACKET
command.
</para>
</sect2>
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
u8 (*check_err)(struct ata_port *ap);
</programlisting>
<para>
Reads the Status/AltStatus/Error ATA shadow register from
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
void (*dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
@ -147,9 +187,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
<para>
Issues the low-level hardware command(s) that causes one of N
hardware devices to be considered 'selected' (active and
available for use) on the ATA bus.
available for use) on the ATA bus. This generally has no
meaning on FIS-based devices.
</para>
</sect2>
<sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
</programlisting>
@ -162,17 +206,31 @@ void (*phy_reset) (struct ata_port *ap);
functions ata_bus_reset() or sata_phy_reset() for this hook.
</para>
</sect2>
<sect2><title>Control PCI IDE BMDMA engine</title>
<programlisting>
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
void (*bmdma_stop) (struct ata_port *ap);
u8 (*bmdma_status) (struct ata_port *ap);
</programlisting>
<para>
When setting up an IDE BMDMA transaction, these hooks arm
(->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
engine.
When setting up an IDE BMDMA transaction, these hooks arm
(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
the hardware's DMA engine. ->bmdma_status is used to read the standard
PCI IDE DMA Status register.
</para>
<para>
These hooks are typically either no-ops, or simply not implemented, in
FIS-based drivers.
</para>
</sect2>
<sect2><title>High-level taskfile hooks</title>
<programlisting>
void (*qc_prep) (struct ata_queued_cmd *qc);
int (*qc_issue) (struct ata_queued_cmd *qc);
@ -190,20 +248,26 @@ int (*qc_issue) (struct ata_queued_cmd *qc);
->qc_issue is used to make a command active, once the hardware
and S/G tables have been prepared. IDE BMDMA drivers use the
helper function ata_qc_issue_prot() for taskfile protocol-based
dispatch. More advanced drivers roll their own ->qc_issue
implementation, using this as the "issue new ATA command to
hardware" hook.
dispatch. More advanced drivers implement their own ->qc_issue.
</para>
</sect2>
<sect2><title>Timeout (error) handling</title>
<programlisting>
void (*eng_timeout) (struct ata_port *ap);
</programlisting>
<para>
This is a high level error handling function, called from the
error handling thread, when a command times out.
This is a high level error handling function, called from the
error handling thread, when a command times out. Most newer
hardware will implement its own error handling code here. IDE BMDMA
drivers may use the helper function ata_eng_timeout().
</para>
</sect2>
<sect2><title>Hardware interrupt handling</title>
<programlisting>
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@ -216,6 +280,9 @@ void (*irq_clear) (struct ata_port *);
is quiet.
</para>
</sect2>
<sect2><title>SATA phy read/write</title>
<programlisting>
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@ -227,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
if ->phy_reset hook called the sata_phy_reset() helper function.
</para>
</sect2>
<sect2><title>Init and shutdown</title>
<programlisting>
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@ -240,15 +310,17 @@ void (*host_stop) (struct ata_host_set *host_set);
tasks.
</para>
<para>
->host_stop() is called when the rmmod or hot unplug process
begins. The hook must stop all hardware interrupts, DMA
engines, etc.
</para>
<para>
->port_stop() is called after ->host_stop(). It's sole function
is to release DMA/memory resources, now that they are no longer
actively being used.
</para>
<para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
</para>
</sect2>
</sect1>
</chapter>
@ -279,4 +351,24 @@ void (*host_stop) (struct ata_host_set *host_set);
!Idrivers/scsi/sata_sil.c
</chapter>
<chapter id="libataThanks">
<title>Thanks</title>
<para>
The bulk of the ATA knowledge comes thanks to long conversations with
Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
and SCSI specifications.
</para>
<para>
Thanks to Alan Cox for pointing out similarities
between SATA and SCSI, and in general for motivation to hack on
libata.
</para>
<para>
libata's device detection
method, ata_pio_devchk, and in general all the early probing was
based on extensive study of Hale Landis's probe/reset code in his
ATADRVR driver (www.ata-atapi.com).
</para>
</chapter>
</book>

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
EXTRAVERSION =-rc5
EXTRAVERSION =-rc6
NAME=Woozy Numbat
# *DOCUMENTATION*

17
arch/m68knommu/kernel/process.c
View File

@ -45,11 +45,13 @@ asmlinkage void ret_from_fork(void);
*/
void default_idle(void)
{
while(1) {
if (need_resched())
__asm__("stop #0x2000" : : : "cc");
schedule();
local_irq_disable();
while (!need_resched()) {
/* This stop will re-enable interrupts */
__asm__("stop #0x2000" : : : "cc");
local_irq_disable();
}
local_irq_enable();
}
void (*idle)(void) = default_idle;
@ -63,7 +65,12 @@ void (*idle)(void) = default_idle;
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
idle();
while (1) {
idle();
preempt_enable_no_resched();
schedule();
preempt_disable();
}
}
void machine_restart(char * __unused)

9
arch/ppc64/kernel/entry.S
View File

@ -436,15 +436,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
#ifdef CONFIG_PPC_ISERIES
clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */
ld r7,TI_FLAGS(r7) /* Get run light flag */
mfspr r9,CTRLF
srdi r7,r7,TIF_RUN_LIGHT
insrdi r9,r7,1,63 /* Insert run light into CTRL */
mtspr CTRLT,r9
#endif
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */

10
arch/ppc64/kernel/head.S
View File

@ -626,10 +626,10 @@ system_reset_iSeries:
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
cmpwi 0,r24,0 /* Are we processor 0? */
beq .__start_initialization_iSeries /* Start up the first processor */
mfspr r4,CTRLF
li r5,RUNLATCH /* Turn off the run light */
mfspr r4,SPRN_CTRLF
li r5,CTRL_RUNLATCH /* Turn off the run light */
andc r4,r4,r5
mtspr CTRLT,r4
mtspr SPRN_CTRLT,r4
1:
HMT_LOW
@ -2082,9 +2082,9 @@ _GLOBAL(hmt_start_secondary)
mfspr r4, HID0
ori r4, r4, 0x1
mtspr HID0, r4
mfspr r4, CTRLF
mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
mtspr CTRLT, r4
mtspr SPRN_CTRLT, r4
blr
#endif

22
arch/ppc64/kernel/iSeries_setup.c
View File

@ -852,6 +852,28 @@ static int __init iSeries_src_init(void)
late_initcall(iSeries_src_init);
static int set_spread_lpevents(char *str)
{
unsigned long i;
unsigned long val = simple_strtoul(str, NULL, 0);
/*
* The parameter is the number of processors to share in processing
* lp events.
*/
if (( val > 0) && (val <= NR_CPUS)) {
for (i = 1; i < val; ++i)
paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
printk("lpevent processing spread over %ld processors\n", val);
} else {
printk("invalid spread_lpevents %ld\n", val);
}
return 1;
}
__setup("spread_lpevents=", set_spread_lpevents);
void __init iSeries_early_setup(void)
{
iSeries_fixup_klimit();

8
arch/ppc64/kernel/idle.c
View File

@ -75,13 +75,9 @@ static int iSeries_idle(void)
{
struct paca_struct *lpaca;
long oldval;
unsigned long CTRL;
/* ensure iSeries run light will be out when idle */
clear_thread_flag(TIF_RUN_LIGHT);
CTRL = mfspr(CTRLF);
CTRL &= ~RUNLATCH;
mtspr(CTRLT, CTRL);
ppc64_runlatch_off();
lpaca = get_paca();
@ -111,7 +107,9 @@ static int iSeries_idle(void)
}
}
ppc64_runlatch_on();
schedule();
ppc64_runlatch_off();
}
return 0;

3
arch/ppc64/kernel/process.c
View File

@ -378,9 +378,6 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
childregs->gpr[1] = sp + sizeof(struct pt_regs);
p->thread.regs = NULL; /* no user register state */
clear_ti_thread_flag(p->thread_info, TIF_32BIT);
#ifdef CONFIG_PPC_ISERIES
set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
#endif
} else {
childregs->gpr[1] = usp;
p->thread.regs = childregs;

2
arch/ppc64/kernel/prom_init.c
View File

@ -1370,7 +1370,7 @@ static int __init prom_find_machine_type(void)
}
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
if (!PHANDLE_VALID(rtas)) {
if (PHANDLE_VALID(rtas)) {
int x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
prom_printf("Hypertas detected, assuming LPAR !\n");

56
arch/ppc64/kernel/setup.c
View File

@ -103,11 +103,6 @@ extern void unflatten_device_tree(void);
extern void smp_release_cpus(void);
unsigned long decr_overclock = 1;
unsigned long decr_overclock_proc0 = 1;
unsigned long decr_overclock_set = 0;
unsigned long decr_overclock_proc0_set = 0;
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@ -1120,64 +1115,15 @@ void ppc64_dump_msg(unsigned int src, const char *msg)
printk("[dump]%04x %s\n", src, msg);
}
int set_spread_lpevents( char * str )
{
/* The parameter is the number of processors to share in processing lp events */
unsigned long i;
unsigned long val = simple_strtoul( str, NULL, 0 );
if ( ( val > 0 ) && ( val <= NR_CPUS ) ) {
for ( i=1; i<val; ++i )
paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
printk("lpevent processing spread over %ld processors\n", val);
}
else
printk("invalid spreaqd_lpevents %ld\n", val);
return 1;
}
/* This should only be called on processor 0 during calibrate decr */
void setup_default_decr(void)
{
struct paca_struct *lpaca = get_paca();
if ( decr_overclock_set && !decr_overclock_proc0_set )
decr_overclock_proc0 = decr_overclock;
lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0;
lpaca->default_decr = tb_ticks_per_jiffy;
lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
}
int set_decr_overclock_proc0( char * str )
{
unsigned long val = simple_strtoul( str, NULL, 0 );
if ( ( val >= 1 ) && ( val <= 48 ) ) {
decr_overclock_proc0_set = 1;
decr_overclock_proc0 = val;
printk("proc 0 decrementer overclock factor of %ld\n", val);
}
else
printk("invalid proc 0 decrementer overclock factor of %ld\n", val);
return 1;
}
int set_decr_overclock( char * str )
{
unsigned long val = simple_strtoul( str, NULL, 0 );
if ( ( val >= 1 ) && ( val <= 48 ) ) {
decr_overclock_set = 1;
decr_overclock = val;
printk("decrementer overclock factor of %ld\n", val);
}
else
printk("invalid decrementer overclock factor of %ld\n", val);
return 1;
}
__setup("spread_lpevents=", set_spread_lpevents );
__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
__setup("decr_overclock=", set_decr_overclock );
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.

3
arch/ppc64/kernel/smp.c
View File

@ -334,7 +334,6 @@ void smp_call_function_interrupt(void)
}
}
extern unsigned long decr_overclock;
extern struct gettimeofday_struct do_gtod;
struct thread_info *current_set[NR_CPUS];
@ -491,7 +490,7 @@ int __devinit __cpu_up(unsigned int cpu)
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock;
paca[cpu].default_decr = tb_ticks_per_jiffy;
if (!cpu_has_feature(CPU_FTR_SLB)) {
void *tmp;

8
arch/ppc64/kernel/sysfs.c
View File

@ -113,7 +113,6 @@ void ppc64_enable_pmcs(void)
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
int ret;
unsigned int ctrl;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
@ -167,11 +166,8 @@ void ppc64_enable_pmcs(void)
* On SMT machines we have to set the run latch in the ctrl register
* in order to make PMC6 spin.
*/
if (cpu_has_feature(CPU_FTR_SMT)) {
ctrl = mfspr(CTRLF);
ctrl |= RUNLATCH;
mtspr(CTRLT, ctrl);
}
if (cpu_has_feature(CPU_FTR_SMT))
ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}

72
arch/s390/appldata/appldata_base.c
View File

@ -28,6 +28,7 @@
//#include <linux/kernel_stat.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/workqueue.h>
#include "appldata.h"
@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL;
static int appldata_timer_active;
/*
* Tasklet
* Work queue
*/
static struct tasklet_struct appldata_tasklet_struct;
static struct workqueue_struct *appldata_wq;
static void appldata_work_fn(void *data);
static DECLARE_WORK(appldata_work, appldata_work_fn, NULL);
/*
* Ops list
@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock);
static LIST_HEAD(appldata_ops_list);
/************************* timer, tasklet, DIAG ******************************/
/*************************** timer, work, DIAG *******************************/
/*
* appldata_timer_function()
*
* schedule tasklet and reschedule timer
* schedule work and reschedule timer
*/
static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
{
@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
atomic_read(&appldata_expire_count));
if (atomic_dec_and_test(&appldata_expire_count)) {
atomic_set(&appldata_expire_count, num_online_cpus());
tasklet_schedule((struct tasklet_struct *) data);
queue_work(appldata_wq, (struct work_struct *) data);
}
}
/*
* appldata_tasklet_function()
* appldata_work_fn()
*
* call data gathering function for each (active) module
*/
static void appldata_tasklet_function(unsigned long data)
static void appldata_work_fn(void *data)
{
struct list_head *lh;
struct appldata_ops *ops;
int i;
P_DEBUG(" -= Tasklet =-\n");
P_DEBUG(" -= Work Queue =-\n");
i = 0;
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
return (int) ry;
}
/********************** timer, tasklet, DIAG <END> ***************************/
/************************ timer, work, DIAG <END> ****************************/
/****************************** /proc stuff **********************************/
@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
struct list_head *lh;
found = 0;
spin_lock_bh(&appldata_ops_lock);
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
if (&tmp_ops->ctl_table[2] == ctl) {
@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
}
}
if (!found) {
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
return -ENODEV;
}
ops = ctl->data;
if (!try_module_get(ops->owner)) { // protect this function
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
return -ENODEV;
}
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
if (!*lenp || *ppos) {
*lenp = 0;
@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
return -EFAULT;
}
spin_lock_bh(&appldata_ops_lock);
spin_lock(&appldata_ops_lock);
if ((buf[0] == '1') && (ops->active == 0)) {
if (!try_module_get(ops->owner)) { // protect tasklet
spin_unlock_bh(&appldata_ops_lock);
// protect work queue callback
if (!try_module_get(ops->owner)) {
spin_unlock(&appldata_ops_lock);
module_put(ops->owner);
return -ENODEV;
}
@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
}
module_put(ops->owner);
}
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
out:
*lenp = len;
*ppos += len;
@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops)
}
memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table));
spin_lock_bh(&appldata_ops_lock);
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n",
@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops)
APPLDATA_PROC_NAME_LENGTH) == 0) {
P_ERROR("Name \"%s\" already registered!\n", ops->name);
kfree(ops->ctl_table);
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
return -EBUSY;
}
if (tmp_ops->ctl_nr == ops->ctl_nr) {
P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr);
kfree(ops->ctl_table);
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
return -EBUSY;
}
}
list_add(&ops->list, &appldata_ops_list);
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
ops->ctl_table[0].ctl_name = CTL_APPLDATA;
ops->ctl_table[0].procname = appldata_proc_name;
@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops)
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
spin_lock_bh(&appldata_ops_lock);
spin_lock(&appldata_ops_lock);
unregister_sysctl_table(ops->sysctl_header);
list_del(&ops->list);
kfree(ops->ctl_table);
ops->ctl_table = NULL;
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
P_INFO("%s-ops unregistered!\n", ops->name);
}
/********************** module-ops management <END> **************************/
@ -602,7 +607,7 @@ appldata_online_cpu(int cpu)
init_virt_timer(&per_cpu(appldata_timer, cpu));
per_cpu(appldata_timer, cpu).function = appldata_timer_function;
per_cpu(appldata_timer, cpu).data = (unsigned long)
&appldata_tasklet_struct;
&appldata_work;
atomic_inc(&appldata_expire_count);
spin_lock(&appldata_timer_lock);
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu)
del_virt_timer(&per_cpu(appldata_timer, cpu));
if (atomic_dec_and_test(&appldata_expire_count)) {
atomic_set(&appldata_expire_count, num_online_cpus());
tasklet_schedule(&appldata_tasklet_struct);
queue_work(appldata_wq, &appldata_work);
}
spin_lock(&appldata_timer_lock);
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = {
/*
* appldata_init()
*
* init timer and tasklet, register /proc entries
* init timer, register /proc entries
*/
static int __init appldata_init(void)
{
@ -657,6 +662,12 @@ static int __init appldata_init(void)
P_DEBUG("sizeof(parameter_list) = %lu\n",
sizeof(struct appldata_parameter_list));
appldata_wq = create_singlethread_workqueue("appldata");
if (!appldata_wq) {
P_ERROR("Could not create work queue\n");
return -ENOMEM;
}
for_each_online_cpu(i)
appldata_online_cpu(i);
@ -670,7 +681,6 @@ static int __init appldata_init(void)
appldata_table[1].de->owner = THIS_MODULE;
#endif
tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0);
P_DEBUG("Base interface initialized.\n");
return 0;
}
@ -678,7 +688,7 @@ static int __init appldata_init(void)
/*
* appldata_exit()
*
* stop timer and tasklet, unregister /proc entries
* stop timer, unregister /proc entries
*/
static void __exit appldata_exit(void)
{
@ -690,7 +700,7 @@ static void __exit appldata_exit(void)
/*
* ops list should be empty, but just in case something went wrong...
*/
spin_lock_bh(&appldata_ops_lock);
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
@ -700,7 +710,7 @@ static void __exit appldata_exit(void)
"return code: %d\n", ops->name, rc);
}
}
spin_unlock_bh(&appldata_ops_lock);
spin_unlock(&appldata_ops_lock);
for_each_online_cpu(i)
appldata_offline_cpu(i);
@ -709,7 +719,7 @@ static void __exit appldata_exit(void)
unregister_sysctl_table(appldata_sysctl_header);
tasklet_kill(&appldata_tasklet_struct);
destroy_workqueue(appldata_wq);
P_DEBUG("... module unloaded!\n");
}
/**************************** init / exit <END> ******************************/

2
arch/s390/appldata/appldata_mem.c
View File

@ -68,7 +68,7 @@ struct appldata_mem_data {
u64 pgmajfault; /* page faults (major only) */
// <-- New in 2.6
} appldata_mem_data;
} __attribute__((packed)) appldata_mem_data;
static inline void appldata_debug_print(struct appldata_mem_data *mem_data)

2
arch/s390/appldata/appldata_net_sum.c
View File

@ -57,7 +57,7 @@ struct appldata_net_sum_data {
u64 rx_dropped; /* no space in linux buffers */
u64 tx_dropped; /* no space available in linux */
u64 collisions; /* collisions while transmitting */
} appldata_net_sum_data;
} __attribute__((packed)) appldata_net_sum_data;
static inline void appldata_print_debug(struct appldata_net_sum_data *net_data)

4
arch/s390/appldata/appldata_os.c
View File

@ -49,7 +49,7 @@ struct appldata_os_per_cpu {
u32 per_cpu_softirq; /* ... spent in softirqs */
u32 per_cpu_iowait; /* ... spent while waiting for I/O */
// <-- New in 2.6
};
} __attribute__((packed));
struct appldata_os_data {
u64 timestamp;
@ -75,7 +75,7 @@ struct appldata_os_data {
/* per cpu data */
struct appldata_os_per_cpu os_cpu[0];
};
} __attribute__((packed));
static struct appldata_os_data *appldata_os_data;

55
arch/s390/kernel/ptrace.c
View File

@ -40,6 +40,7 @@
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
#ifdef CONFIG_S390_SUPPORT
#include "compat_ptrace.h"
@ -130,13 +131,19 @@ static int
peek_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
addr_t offset, tmp;
addr_t offset, tmp, mask;
/*
* Stupid gdb peeks/pokes the access registers in 64 bit with
* an alignment of 4. Programmers from hell...
*/
if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
mask = __ADDR_MASK;
#ifdef CONFIG_ARCH_S390X
if (addr >= (addr_t) &dummy->regs.acrs &&
addr < (addr_t) &dummy->regs.orig_gpr2)
mask = 3;
#endif
if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr < (addr_t) &dummy->regs.acrs) {
@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
* access registers are stored in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.acrs;
#ifdef CONFIG_ARCH_S390X
/*
* Very special case: old & broken 64 bit gdb reading
* from acrs[15]. Result is a 64 bit value. Read the
* 32 bit acrs[15] value and shift it by 32. Sick...
*/
if (addr == (addr_t) &dummy->regs.acrs[15])
tmp = ((unsigned long) child->thread.acrs[15]) << 32;
else
#endif
tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
*/
offset = addr - (addr_t) &dummy->regs.fp_regs;
tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
tmp &= (unsigned long) FPC_VALID_MASK
<< (BITS_PER_LONG - 32);
} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
/*
@ -191,13 +211,19 @@ static int
poke_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
addr_t offset;
addr_t offset, mask;
/*
* Stupid gdb peeks/pokes the access registers in 64 bit with
* an alignment of 4. Programmers from hell indeed...
*/
if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
mask = __ADDR_MASK;
#ifdef CONFIG_ARCH_S390X
if (addr >= (addr_t) &dummy->regs.acrs &&
addr < (addr_t) &dummy->regs.orig_gpr2)
mask = 3;
#endif
if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr < (addr_t) &dummy->regs.acrs) {
@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
* access registers are stored in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.acrs;
#ifdef CONFIG_ARCH_S390X
/*
* Very special case: old & broken 64 bit gdb writing
* to acrs[15] with a 64 bit value. Ignore the lower
* half of the value and write the upper 32 bit to
* acrs[15]. Sick...
*/
if (addr == (addr_t) &dummy->regs.acrs[15])
child->thread.acrs[15] = (unsigned int) (data >> 32);
else
#endif
*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
* floating point regs. are stored in the thread structure
*/
if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
(data & ~FPC_VALID_MASK) != 0)
(data & ~((unsigned long) FPC_VALID_MASK
<< (BITS_PER_LONG - 32))) != 0)
return -EINVAL;
offset = addr - (addr_t) &dummy->regs.fp_regs;
*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
@ -722,6 +760,13 @@ syscall_trace(struct pt_regs *regs, int entryexit)
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
/*
* If the debuffer has set an invalid system call number,
* we prepare to skip the system call restart handling.
*/
if (!entryexit && regs->gprs[2] >= NR_syscalls)
regs->trap = -1;
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the

2
arch/s390/mm/fault.c
View File

@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
* we are not in an interrupt and that there is a
* user context.
*/
if (user_address == 0 || in_interrupt() || !mm)
if (user_address == 0 || in_atomic() || !mm)
goto no_context;
/*

3
drivers/atm/Makefile
View File

@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y)
fore_200e-objs += fore200e_pca_fw.o
# guess the target endianess to choose the right PCA-200E firmware image
ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi)
byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
endif
endif

6
drivers/atm/fore200e.c
View File

@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e)
switch(fore200e->state) {
case FORE200E_STATE_COMPLETE:
if (fore200e->stats)
kfree(fore200e->stats);
kfree(fore200e->stats);
case FORE200E_STATE_IRQ:
free_irq(fore200e->irq, fore200e->atm_dev);
@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e)
entry, txq->tail, entry->vc_map, entry->skb);
/* free copy of misaligned data */
if (entry->data)
kfree(entry->data);
kfree(entry->data);
/* remove DMA mapping */
fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,

6
drivers/atm/he.c
View File

@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
init_one_failure:
if (atm_dev)
atm_dev_deregister(atm_dev);
if (he_dev)
kfree(he_dev);
kfree(he_dev);
pci_disable_device(pci_dev);
return err;
}
@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc)
open_failed:
if (err) {
if (he_vcc)
kfree(he_vcc);
kfree(he_vcc);
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
else

20
drivers/atm/nicstar.c
View File

@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
/* Initialize SCQ0, the only VBR SCQ used */
card->scq1 = (scq_info *) NULL;
card->scq2 = (scq_info *) NULL;
card->scq1 = NULL;
card->scq2 = NULL;
card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
if (card->scq0 == (scq_info *) NULL)
if (card->scq0 == NULL)
{
printk("nicstar%d: can't get SCQ0.\n", i);
error = 12;
@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd)
int i;
if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
return (scq_info *) NULL;
return NULL;
scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
if (scq == (scq_info *) NULL)
return (scq_info *) NULL;
if (scq == NULL)
return NULL;
scq->org = kmalloc(2 * size, GFP_KERNEL);
if (scq->org == NULL)
{
kfree(scq);
return (scq_info *) NULL;
return NULL;
}
scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
(size / NS_SCQE_SIZE), GFP_KERNEL);
if (scq->skb == (struct sk_buff **) NULL)
if (scq->skb == NULL)
{
kfree(scq->org);
kfree(scq);
return (scq_info *) NULL;
return NULL;
}
scq->num_entries = size / NS_SCQE_SIZE;
scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc)
vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
if (scq == (scq_info *) NULL)
if (scq == NULL)
{
PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
card->scd2vc[frscdi] = NULL;

11
drivers/atm/zatm.c
View File

@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc)
zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
dealloc_shaper(vcc->dev,zatm_vcc->shaper);
}
if (zatm_vcc->ring) kfree(zatm_vcc->ring);
kfree(zatm_vcc->ring);
}
@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev)
return 0;
out:
for (i = 0; i < NR_MBX; i++)
if (zatm_dev->mbx_start[i] != 0)
kfree((void *) zatm_dev->mbx_start[i]);
if (zatm_dev->rx_map != NULL)
kfree(zatm_dev->rx_map);
if (zatm_dev->tx_map != NULL)
kfree(zatm_dev->tx_map);
kfree(zatm_dev->mbx_start[i]);
kfree(zatm_dev->rx_map);
kfree(zatm_dev->tx_map);
free_irq(zatm_dev->irq, dev);
return error;
}

600
drivers/block/ub.c
View File

File diff suppressed because it is too large Load Diff

126
drivers/net/hamradio/baycom_epp.c
View File

@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc,
}
/* --------------------------------------------------------------------- */
/*
* high performance HDLC encoder
* yes, it's ugly, but generates pretty good code
*/
#define ENCODEITERA(j) \
({ \
if (!(notbitstream & (0x1f0 << j))) \
goto stuff##j; \
encodeend##j: ; \
})
#define ENCODEITERB(j) \
({ \
stuff##j: \
bitstream &= ~(0x100 << j); \
bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \
((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \
numbit++; \
notbitstream = ~bitstream; \
goto encodeend##j; \
})
static void encode_hdlc(struct baycom_state *bc)
{
@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc)
int pkt_len;
unsigned bitstream, notbitstream, bitbuf, numbit, crc;
unsigned char crcarr[2];
int j;
if (bc->hdlctx.bufcnt > 0)
return;
@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc)
pkt_len--;
if (!pkt_len)
bp = crcarr;
ENCODEITERA(0);
ENCODEITERA(1);
ENCODEITERA(2);
ENCODEITERA(3);
ENCODEITERA(4);
ENCODEITERA(5);
ENCODEITERA(6);
ENCODEITERA(7);
goto enditer;
ENCODEITERB(0);
ENCODEITERB(1);
ENCODEITERB(2);
ENCODEITERB(3);
ENCODEITERB(4);
ENCODEITERB(5);
ENCODEITERB(6);
ENCODEITERB(7);
enditer:
for (j = 0; j < 8; j++)
if (unlikely(!(notbitstream & (0x1f0 << j)))) {
bitstream &= ~(0x100 << j);
bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
numbit++;
notbitstream = ~bitstream;
}
numbit += 8;
while (numbit >= 8) {
*wp++ = bitbuf;
@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev)
bc->stats.rx_packets++;
}
#define DECODEITERA(j) \
({ \
if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \
goto flgabrt##j; \
if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \
goto stuff##j; \
enditer##j: ; \
})
#define DECODEITERB(j) \
({ \
flgabrt##j: \
if (!(notbitstream & (0x1fc << j))) { /* abort received */ \
state = 0; \
goto enditer##j; \
} \
if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \
goto enditer##j; \
if (state) \
do_rxpacket(dev); \
bc->hdlcrx.bufcnt = 0; \
bc->hdlcrx.bufptr = bc->hdlcrx.buf; \
state = 1; \
numbits = 7-j; \
goto enditer##j; \
stuff##j: \
numbits--; \
bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \
goto enditer##j; \
})
static int receive(struct net_device *dev, int cnt)
{
struct baycom_state *bc = netdev_priv(dev);
@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt)
unsigned char tmp[128];
unsigned char *cp;
int cnt2, ret = 0;
int j;
numbits = bc->hdlcrx.numbits;
state = bc->hdlcrx.state;
@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt)
bitbuf |= (*cp) << 8;
numbits += 8;
notbitstream = ~bitstream;
DECODEITERA(0);
DECODEITERA(1);
DECODEITERA(2);
DECODEITERA(3);
DECODEITERA(4);
DECODEITERA(5);
DECODEITERA(6);
DECODEITERA(7);
goto enddec;
DECODEITERB(0);
DECODEITERB(1);
DECODEITERB(2);
DECODEITERB(3);
DECODEITERB(4);
DECODEITERB(5);
DECODEITERB(6);
DECODEITERB(7);
enddec:
for (j = 0; j < 8; j++) {
/* flag or abort */
if (unlikely(!(notbitstream & (0x0fc << j)))) {
/* abort received */
if (!(notbitstream & (0x1fc << j)))
state = 0;
/* not flag received */
else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
if (state)
do_rxpacket(dev);
bc->hdlcrx.bufcnt = 0;
bc->hdlcrx.bufptr = bc->hdlcrx.buf;
state = 1;
numbits = 7-j;
}
}
/* stuffed bit */
else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
numbits--;
bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
}
}
while (state && numbits >= 8) {
if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
state = 0;

3
drivers/net/pcmcia/3c574_cs.c
View File

@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev)
spin_lock_irqsave(&lp->window_lock, flags);
update_stats(dev);
spin_unlock_irqrestore(&lp->window_lock, flags);
/* force interrupts off */
outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
}
link->open--;

31
drivers/net/r8169.c
View File

@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev)
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(EarlyTxThres, EarlyTxThld);
/* For gigabit rtl8169, MTU + header + CRC + VLAN */
RTL_W16(RxMaxSize, tp->rx_buf_sz);
/* Low hurts. Let's disable the filtering. */
RTL_W16(RxMaxSize, 16383);
/* Set Rx Config register */
i = rtl8169_rx_config |
@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
}
}
static inline int rtl8169_fragmented_frame(u32 status)
{
return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
}
static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
{
u32 opts1 = le32_to_cpu(desc->opts1);
@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
while (rx_left > 0) {
unsigned int entry = cur_rx % NUM_RX_DESC;
struct RxDesc *desc = tp->RxDescArray + entry;
u32 status;
rmb();
status = le32_to_cpu(tp->RxDescArray[entry].opts1);
status = le32_to_cpu(desc->opts1);
if (status & DescOwn)
break;
if (status & RxRES) {
printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name);
printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
dev->name, status);
tp->stats.rx_errors++;
if (status & (RxRWT | RxRUNT))
tp->stats.rx_length_errors++;
if (status & RxCRC)
tp->stats.rx_crc_errors++;
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
struct RxDesc *desc = tp->RxDescArray + entry;
struct sk_buff *skb = tp->Rx_skbuff[entry];
int pkt_size = (status & 0x00001FFF) - 4;
void (*pci_action)(struct pci_dev *, dma_addr_t,
size_t, int) = pci_dma_sync_single_for_device;
/*
* The driver does not support incoming fragmented
* frames. They are seen as a symptom of over-mtu
* sized frames.
*/
if (unlikely(rtl8169_fragmented_frame(status))) {
tp->stats.rx_dropped++;
tp->stats.rx_length_errors++;
rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
goto move_on;
}
rtl8169_rx_csum(skb, desc);
pci_dma_sync_single_for_cpu(tp->pci_dev,
@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
tp->stats.rx_bytes += pkt_size;
tp->stats.rx_packets++;
}
move_on:
cur_rx++;
rx_left--;
}

86
drivers/net/shaper.c
View File

@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */
#define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
/*
* Locking
*/
static int shaper_lock(struct shaper *sh)
{
/*
* Lock in an interrupt must fail
*/
while (test_and_set_bit(0, &sh->locked))
{
if (!in_interrupt())
sleep_on(&sh->wait_queue);
else
return 0;
}
return 1;
}
static void shaper_kick(struct shaper *sh);
static void shaper_unlock(struct shaper *sh)
{
clear_bit(0, &sh->locked);
wake_up(&sh->wait_queue);
shaper_kick(sh);
}
/*
* Compute clocks on a buffer
*/
@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec)
* Throw a frame at a shaper.
*/
static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct shaper *shaper = dev->priv;
struct sk_buff *ptr;
/*
* Get ready to work on this shaper. Lock may fail if its
* an interrupt and locked.
*/
if(!shaper_lock(shaper))
return -1;
if (down_trylock(&shaper->sem))
return -1;
ptr=shaper->sendq.prev;
/*
@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
dev_kfree_skb(ptr);
shaper->stats.collisions++;
}
shaper_unlock(shaper);
shaper_kick(shaper);
up(&shaper->sem);
return 0;
}
@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
static void shaper_timer(unsigned long data)
{
struct shaper *sh=(struct shaper *)data;
shaper_kick(sh);
struct shaper *shaper = (struct shaper *)data;
if (!down_trylock(&shaper->sem)) {
shaper_kick(shaper);
up(&shaper->sem);
} else
mod_timer(&shaper->timer, jiffies);
}
/*
@ -310,19 +287,6 @@ static void shaper_kick(struct shaper *shaper)
{
struct sk_buff *skb;
/*
* Shaper unlock will kick
*/
if (test_and_set_bit(0, &shaper->locked))
{
if(sh_debug)
printk("Shaper locked.\n");
mod_timer(&shaper->timer, jiffies);
return;
}
/*
* Walk the list (may be empty)
*/
@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper)
if(skb!=NULL)
mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
clear_bit(0, &shaper->locked);
}
@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper)
static void shaper_flush(struct shaper *shaper)
{
struct sk_buff *skb;
if(!shaper_lock(shaper))
{
printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
return;
}
down(&shaper->sem);
while((skb=skb_dequeue(&shaper->sendq))!=NULL)
dev_kfree_skb(skb);
shaper_unlock(shaper);
shaper_kick(shaper);
up(&shaper->sem);
}
/*
@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev)
* ARP and other resolutions and not before.
*/
static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct shaper *sh=dev->priv;
return shaper_qframe(sh, skb);
}
static struct net_device_stats *shaper_get_stats(struct net_device *dev)
{
struct shaper *sh=dev->priv;
@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev)
init_timer(&sh->timer);
sh->timer.function=shaper_timer;
sh->timer.data=(unsigned long)sh;
init_waitqueue_head(&sh->wait_queue);
}
/*

16
drivers/scsi/ata_piix.c
View File

@ -665,15 +665,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return ata_pci_init_one(pdev, port_info, n_ports);
}
/**
* piix_init -
*
* LOCKING:
*
* RETURNS:
*
*/
static int __init piix_init(void)
{
int rc;
@ -689,13 +680,6 @@ static int __init piix_init(void)
return 0;
}
/**
* piix_exit -
*
* LOCKING:
*
*/
static void __exit piix_exit(void)
{
pci_unregister_driver(&piix_pci_driver);

470
drivers/scsi/libata-core.c
View File

@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
ata_wait_idle(ap);
}
/**
* ata_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Outputs ATA taskfile to standard ATA host controller using MMIO
* or PIO as indicated by the ATA_FLAG_MMIO flag.
* Writes the control, feature, nsect, lbal, lbam, and lbah registers.
* Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
* hob_lbal, hob_lbam, and hob_lbah.
*
* This function waits for idle (!BUSY and !DRQ) after writing
* registers. If the control register has a new value, this
* function also waits for idle after writing control and before
* writing the remaining registers.
*
* May be used as the tf_load() entry in ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
}
/**
* ata_exec_command - issue ATA command to host controller
* ata_exec_command_pio - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
* Issues PIO/MMIO write to ATA command register, with proper
* Issues PIO write to ATA command register, with proper
* synchronization with interrupt handler / other threads.
*
* LOCKING:
@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
ata_pause(ap);
}
/**
* ata_exec_command - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
* Issues PIO/MMIO write to ATA command register, with proper
* synchronization with interrupt handler / other threads.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
}
/**
* ata_tf_read - input device's ATA taskfile shadow registers
* ata_tf_read_pio - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
}
}
/**
* ata_tf_read - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
* Reads ATA taskfile registers for currently-selected device
* into @tf.
*
* Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
* is set, also reads the hob registers.
*
* May be used as the tf_read() entry in ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
* and return it's value. This also clears pending interrupts
* and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap)
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
* via MMIO and return it's value. This also clears pending interrupts
* via MMIO and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap)
return readb((void __iomem *) ap->ioaddr.status_addr);
}
/**
* ata_check_status - Read device status reg & clear interrupt
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
* and return its value. This also clears pending interrupts
* from this device
*
* May be used as the check_status() entry in ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
u8 ata_check_status(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO)
@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap)
return ata_check_status_pio(ap);
}
/**
* ata_altstatus - Read device alternate status reg
* @ap: port where the device is
*
* Reads ATA taskfile alternate status register for
* currently-selected device and return its value.
*
* Note: may NOT be used as the check_altstatus() entry in
* ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
u8 ata_altstatus(struct ata_port *ap)
{
if (ap->ops->check_altstatus)
@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap)
return inb(ap->ioaddr.altstatus_addr);
}
/**
* ata_chk_err - Read device error reg
* @ap: port where the device is
*
* Reads ATA taskfile error register for
* currently-selected device and return its value.
*
* Note: may NOT be used as the check_err() entry in
* ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
u8 ata_chk_err(struct ata_port *ap)
{
if (ap->ops->check_err)
@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s,
}
}
/**
* ata_noop_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
* This function performs no actual function.
*
* May be used as the dev_select() entry in ata_port_operations.
*
* LOCKING:
* caller.
*/
void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
{
}
/**
* ata_std_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
*
* Use the method defined in the ATA specification to
* make either device 0, or device 1, active on the
* ATA channel.
* ATA channel. Works with both PIO and MMIO.
*
* May be used as the dev_select() entry in ata_port_operations.
*
* LOCKING:
* caller.
@ -1190,7 +1299,12 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device)
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
* Master ATA bus probing function. Initiates a hardware-dependent
* bus reset, then attempts to identify any devices found on
* the bus.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, non-zero on error.
@ -1229,10 +1343,14 @@ static int ata_bus_probe(struct ata_port *ap)
}
/**
* ata_port_probe -
* @ap:
* ata_port_probe - Mark port as enabled
* @ap: Port for which we indicate enablement
*
* LOCKING:
* Modify @ap data structure such that the system
* thinks that the entire port is enabled.
*
* LOCKING: host_set lock, or some other form of
* serialization.
*/
void ata_port_probe(struct ata_port *ap)
@ -1241,10 +1359,15 @@ void ata_port_probe(struct ata_port *ap)
}
/**
* __sata_phy_reset -
* @ap:
* __sata_phy_reset - Wake/reset a low-level SATA PHY
* @ap: SATA port associated with target SATA PHY.
*
* This function issues commands to standard SATA Sxxx
* PHY registers, to wake up the phy (and device), and
* clear any reset condition.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
*/
void __sata_phy_reset(struct ata_port *ap)
@ -1289,10 +1412,14 @@ void __sata_phy_reset(struct ata_port *ap)
}
/**
* __sata_phy_reset -
* @ap:
* sata_phy_reset - Reset SATA bus.
* @ap: SATA port associated with target SATA PHY.
*
* This function resets the SATA bus, and then probes
* the bus for devices.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
*/
void sata_phy_reset(struct ata_port *ap)
@ -1304,10 +1431,16 @@ void sata_phy_reset(struct ata_port *ap)
}
/**
* ata_port_disable -
* @ap:
* ata_port_disable - Disable port.
* @ap: Port to be disabled.
*
* LOCKING:
* Modify @ap data structure such that the system
* thinks that the entire port is disabled, and should
* never attempt to probe or communicate with devices
* on this port.
*
* LOCKING: host_set lock, or some other form of
* serialization.
*/
void ata_port_disable(struct ata_port *ap)
@ -1416,7 +1549,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
*
* Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
*
* LOCKING:
* PCI/etc. bus probe sem.
*
*/
static void ata_set_mode(struct ata_port *ap)
@ -1467,7 +1603,10 @@ static void ata_set_mode(struct ata_port *ap)
* @tmout_pat: impatience timeout
* @tmout: overall timeout
*
* LOCKING:
* Sleep until ATA Status register bit BSY clears,
* or a timeout occurs.
*
* LOCKING: None.
*
*/
@ -1553,10 +1692,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
}
/**
* ata_bus_edd -
* @ap:
* ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
* @ap: Port to reset and probe
*
* Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
* probe the bus. Not often used these days.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
*/
@ -1633,8 +1776,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
* the device is ATA or ATAPI.
*
* LOCKING:
* Inherited from caller. Some functions called by this function
* obtain the host_set lock.
* PCI/etc. bus probe sem.
* Obtains host_set lock.
*
* SIDE EFFECTS:
* Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
@ -1876,7 +2019,11 @@ static int fgb(u32 bitmap)
* @xfer_mode_out: (output) SET FEATURES - XFER MODE code
* @xfer_shift_out: (output) bit shift that selects this mode
*
* Based on host and device capabilities, determine the
* maximum transfer mode that is amenable to all.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, negative on error.
@ -1909,7 +2056,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap,
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
*
* Issue SET FEATURES - XFER MODE command to device @dev
* on port @ap.
*
* LOCKING:
* PCI/etc. bus probe sem.
*/
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
@ -1947,10 +2098,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
}
/**
* ata_sg_clean -
* @qc:
* ata_sg_clean - Unmap DMA memory associated with command
* @qc: Command containing DMA memory to be released
*
* Unmap all mapped DMA memory associated with this command.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
static void ata_sg_clean(struct ata_queued_cmd *qc)
@ -1981,7 +2135,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
* ata_fill_sg - Fill PCI IDE PRD table
* @qc: Metadata associated with taskfile to be transferred
*
* Fill PCI IDE PRD (scatter-gather) table with segments
* associated with the current disk command.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
@ -2028,7 +2186,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
* Allow low-level driver to filter ATA PACKET commands, returning
* a status indicating whether or not it is OK to use DMA for the
* supplied PACKET command.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
@ -2046,6 +2210,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
* Prepare ATA taskfile for submission.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
@ -2057,6 +2223,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
ata_fill_sg(qc);
}
/**
* ata_sg_init_one - Associate command with memory buffer
* @qc: Command to be associated
* @buf: Memory buffer
* @buflen: Length of memory buffer, in bytes.
*
* Initialize the data-related elements of queued_cmd @qc
* to point to a single memory buffer, @buf of byte length @buflen.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
/**
* ata_sg_init_one - Prepare a one-entry scatter-gather list.
* @qc: Queued command
* @buf: transfer buffer
* @buflen: length of buf
*
* Builds a single-entry scatter-gather list to initiate a
* transfer utilizing the specified buffer.
*
* LOCKING:
*/
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
@ -2074,6 +2266,32 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
sg->length = buflen;
}
/**
* ata_sg_init - Associate command with scatter-gather table.
* @qc: Command to be associated
* @sg: Scatter-gather table.
* @n_elem: Number of elements in s/g table.
*
* Initialize the data-related elements of queued_cmd @qc
* to point to a scatter-gather table @sg, containing @n_elem
* elements.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
/**
* ata_sg_init - Assign a scatter gather list to a queued command
* @qc: Queued command
* @sg: Scatter-gather list
* @n_elem: length of sg list
*
* Attaches a scatter-gather list to a queued command.
*
* LOCKING:
*/
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
@ -2083,14 +2301,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
}
/**
* ata_sg_setup_one -
* @qc:
* ata_sg_setup_one - DMA-map the memory buffer associated with a command.
* @qc: Command with memory buffer to be mapped.
*
* DMA-map the memory buffer associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
*
* Zero on success, negative on error.
*/
static int ata_sg_setup_one(struct ata_queued_cmd *qc)
@ -2115,13 +2335,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
}
/**
* ata_sg_setup -
* @qc:
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
* @qc: Command with scatter-gather table to be mapped.
*
* DMA-map the scatter-gather table associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
* Zero on success, negative on error.
*
*/
@ -2151,6 +2374,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
* @ap:
*
* LOCKING:
* None. (executing in kernel thread context)
*
* RETURNS:
*
@ -2198,6 +2422,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
* @ap:
*
* LOCKING:
* None. (executing in kernel thread context)
*/
static void ata_pio_complete (struct ata_port *ap)
@ -2240,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap)
ata_qc_complete(qc, drv_stat);
}
/**
* swap_buf_le16 -
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
* Swap halves of 16-bit words if needed to convert from
* little-endian byte order to native cpu byte order, or
* vice-versa.
*
* LOCKING:
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
#ifdef __BIG_ENDIAN
@ -2415,6 +2652,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
* @ap:
*
* LOCKING:
* None. (executing in kernel thread context)
*/
static void ata_pio_block(struct ata_port *ap)
@ -2583,6 +2821,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
* transaction completed successfully.
*
* LOCKING:
* Inherited from SCSI layer (none, can sleep)
*/
static void ata_qc_timeout(struct ata_queued_cmd *qc)
@ -2692,6 +2931,7 @@ void ata_eng_timeout(struct ata_port *ap)
* @dev: Device from whom we request an available command structure
*
* LOCKING:
* None.
*/
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
@ -2717,6 +2957,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
* @dev: Device from whom we request an available command structure
*
* LOCKING:
* None.
*/
struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
@ -2781,6 +3022,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
* in case something prevents using it.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
*/
void ata_qc_free(struct ata_queued_cmd *qc)
@ -2794,9 +3036,13 @@ void ata_qc_free(struct ata_queued_cmd *qc)
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
* @drv_stat: ATA status register contents
* @drv_stat: ATA Status register contents
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
*/
@ -2892,6 +3138,7 @@ int ata_qc_issue(struct ata_queued_cmd *qc)
return -1;
}
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
@ -2901,6 +3148,8 @@ int ata_qc_issue(struct ata_queued_cmd *qc)
* classes called "protocols", and issuing each type of protocol
* is slightly different.
*
* May be used as the qc_issue() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
@ -2958,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
}
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* LOCKING:
@ -3065,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
}
/**
* ata_bmdma_start - Start a PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* Writes the ATA_DMA_START flag to the DMA command register.
*
* May be used as the bmdma_start() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
void ata_bmdma_start(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@ -3073,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
ata_bmdma_start_pio(qc);
}
/**
* ata_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* Writes address of PRD table to device's PRD Table Address
* register, sets the DMA control register, and calls
* ops->exec_command() to start the transfer.
*
* May be used as the bmdma_setup() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
void ata_bmdma_setup(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@ -3081,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
ata_bmdma_setup_pio(qc);
}
/**
* ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
* Clear interrupt and error flags in DMA status register.
*
* May be used as the irq_clear() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
void ata_bmdma_irq_clear(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@ -3093,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
}
/**
* ata_bmdma_status - Read PCI IDE BMDMA status
* @ap: Port associated with this ATA transaction.
*
* Read and return BMDMA status register.
*
* May be used as the bmdma_status() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
u8 ata_bmdma_status(struct ata_port *ap)
{
u8 host_stat;
@ -3104,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap)
return host_stat;
}
/**
* ata_bmdma_stop - Stop PCI IDE BMDMA transfer
* @ap: Port associated with this ATA transaction.
*
* Clears the ATA_DMA_START flag in the dma control register
*
* May be used as the bmdma_stop() entry in ata_port_operations.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
void ata_bmdma_stop(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@ -3203,13 +3517,18 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
/**
* ata_interrupt - Default ATA host interrupt handler
* @irq: irq line
* @dev_instance: pointer to our host information structure
* @irq: irq line (unused)
* @dev_instance: pointer to our ata_host_set information structure
* @regs: unused
*
* Default interrupt handler for PCI IDE devices. Calls
* ata_host_intr() for each port that is not disabled.
*
* LOCKING:
* Obtains host_set lock during operation.
*
* RETURNS:
* IRQ_NONE or IRQ_HANDLED.
*
*/
@ -3302,6 +3621,19 @@ static void atapi_packet_task(void *_data)
ata_qc_complete(qc, ATA_ERR);
}
/**
* ata_port_start - Set port up for dma.
* @ap: Port to initialize
*
* Called just after data structures for each port are
* initialized. Allocates space for PRD table.
*
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
*/
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@ -3315,6 +3647,18 @@ int ata_port_start (struct ata_port *ap)
return 0;
}
/**
* ata_port_stop - Undo ata_port_start()
* @ap: Port to shut down
*
* Frees the PRD table.
*
* May be used as the port_stop() entry in ata_port_operations.
*
* LOCKING:
*/
void ata_port_stop (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@ -3357,7 +3701,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
* @ent: Probe information provided by low-level driver
* @port_no: Port number associated with this ata_port
*
* Initialize a new ata_port structure, and its associated
* scsi_host.
*
* LOCKING:
* Inherited from caller.
*
*/
@ -3412,9 +3760,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
* @host_set: Collections of ports to which we add
* @port_no: Port number associated with this host
*
* Attach low-level ATA driver to system.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
* RETURNS:
* New ata_port on success, for NULL on error.
*
*/
@ -3447,12 +3799,22 @@ static struct ata_port * ata_host_add(struct ata_probe_ent *ent,
}
/**
* ata_device_add -
* @ent:
* ata_device_add - Register hardware device with ATA and SCSI layers
* @ent: Probe information describing hardware device to be registered
*
* This function processes the information provided in the probe
* information struct @ent, allocates the necessary ATA and SCSI
* host information structures, initializes them, and registers
* everything with requisite kernel subsystems.
*
* This function requests irqs, probes the ATA bus, and probes
* the SCSI bus.
*
* LOCKING:
* PCI/etc. bus probe sem.
*
* RETURNS:
* Number of ports registered. Zero on error (no ports registered).
*
*/
@ -3604,7 +3966,15 @@ int ata_scsi_release(struct Scsi_Host *host)
/**
* ata_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
*
* Utility function which initializes data_addr, error_addr,
* feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
* device_addr, status_addr, and command_addr to standard offsets
* relative to cmd_addr.
*
* Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
void ata_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
@ -3646,6 +4016,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
return probe_ent;
}
/**
* ata_pci_init_native_mode - Initialize native-mode driver
* @pdev: pci device to be initialized
* @port: array[2] of pointers to port info structures.
*
* Utility function which allocates and initializes an
* ata_probe_ent structure for a standard dual-port
* PIO-based IDE controller. The returned ata_probe_ent
* structure can be passed to ata_device_add(). The returned
* ata_probe_ent structure should then be freed with kfree().
*/
#ifdef CONFIG_PCI
struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
@ -3727,10 +4111,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
* @port_info: Information from low-level host driver
* @n_ports: Number of ports attached to host controller
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
* IDE taskfile registers.
*
* This function calls pci_enable_device(), reserves its register
* regions, sets the dma mask, enables bus master mode, and calls
* ata_device_add()
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, negative on errno-based value on error.
*
*/
@ -3949,15 +4342,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
#endif /* CONFIG_PCI */
/**
* ata_init -
*
* LOCKING:
*
* RETURNS:
*
*/
static int __init ata_init(void)
{
ata_wq = create_workqueue("ata");

2
drivers/scsi/libata-scsi.c
View File

@ -947,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
}
/**
* ata_scsiop_noop -
* ata_scsiop_noop - Command handler that simply returns success.
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.

24
drivers/scsi/qla2xxx/qla_os.c
View File

@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
int ret, i;
unsigned int id, lun;
unsigned long serial;
unsigned long flags;
if (!CMD_SP(cmd))
return FAILED;
@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
/* Check active list for command command. */
spin_unlock_irq(ha->host->host_lock);
spin_lock(&ha->hardware_lock);
spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
sp = ha->outstanding_cmds[i];
@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
sp->state));
DEBUG3(qla2x00_print_scsi_cmd(cmd);)
spin_unlock(&ha->hardware_lock);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (qla2x00_abort_command(ha, sp)) {
DEBUG2(printk("%s(%ld): abort_command "
"mbx failed.\n", __func__, ha->host_no));
@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
"mbx success.\n", __func__, ha->host_no));
ret = SUCCESS;
}
spin_lock(&ha->hardware_lock);
spin_lock_irqsave(&ha->hardware_lock, flags);
break;
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
if (ret == SUCCESS) {
spin_unlock(&ha->hardware_lock);
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
}
spin_lock(&ha->hardware_lock);
}
spin_lock_irq(ha->host->host_lock);
@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
unsigned long flags;
status = 0;
@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
spin_lock(&ha->hardware_lock);
spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
spin_unlock(&ha->hardware_lock);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (cmd->device->id == t) {
if (!qla2x00_eh_wait_on_command(ha, cmd)) {
status = 1;
@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
}
}
} else {
spin_unlock(&ha->hardware_lock);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);
@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
unsigned long flags;
status = 1;
@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
spin_lock(&ha->hardware_lock);
spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
spin_unlock(&ha->hardware_lock);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
status = qla2x00_eh_wait_on_command(ha, cmd);
if (status == 0)
break;
}
else {
spin_unlock(&ha->hardware_lock);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);

1
drivers/scsi/scsi_scan.c
View File

@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
if (!starget)
return ERR_PTR(-ENOMEM);
get_device(&starget->dev);
down(&shost->scan_mutex);
res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
if (res != SCSI_SCAN_LUN_PRESENT)

66
drivers/serial/vr41xx_siu.c
View File

@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port)
return "DSIU";
}
return "unknown";
return NULL;
}
static unsigned int siu_tx_empty(struct uart_port *port)
@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
struct uart_port *port;
uint8_t iir, lsr;
if (dev_id == NULL)
return IRQ_NONE;
port = (struct uart_port *)dev_id;
iir = siu_read(port, UART_IIR);
@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port)
{
int retval;
if (port->membase == NULL)
return -ENODEV;
siu_clear_fifo(port);
(void)siu_read(port, UART_LSR);
@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port)
unsigned long flags;
uint8_t lcr;
if (port->membase == NULL)
return;
siu_write(port, UART_IER, 0);
spin_lock_irqsave(&port->lock, flags);
@ -802,53 +799,6 @@ static int siu_init_ports(void)
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
static void early_set_termios(struct uart_port *port, struct termios *new,
struct termios *old)
{
tcflag_t c_cflag;
uint8_t lcr;
unsigned int baud, quot;
c_cflag = new->c_cflag;
switch (c_cflag & CSIZE) {
case CS5:
lcr = UART_LCR_WLEN5;
break;
case CS6:
lcr = UART_LCR_WLEN6;
break;
case CS7:
lcr = UART_LCR_WLEN7;
break;
default:
lcr = UART_LCR_WLEN8;
break;
}
if (c_cflag & CSTOPB)
lcr |= UART_LCR_STOP;
if (c_cflag & PARENB)
lcr |= UART_LCR_PARITY;
if ((c_cflag & PARODD) != PARODD)
lcr |= UART_LCR_EPAR;
if (c_cflag & CMSPAR)
lcr |= UART_LCR_SPAR;
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
siu_write(port, UART_DLL, (uint8_t)quot);
siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
siu_write(port, UART_LCR, lcr);
}
static struct uart_ops early_uart_ops = {
.set_termios = early_set_termios,
};
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static void wait_for_xmitr(struct uart_port *port)
@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options)
if (port->membase == NULL) {
if (port->mapbase == 0)
return -ENODEV;
port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
port->membase = ioremap(port->mapbase, siu_port_size(port));
}
vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
@ -949,7 +899,7 @@ static int __devinit siu_console_init(void)
for (i = 0; i < num; i++) {
port = &siu_uart_ports[i];
port->ops = &early_uart_ops;
port->ops = &siu_uart_ops;
}
register_console(&siu_console);
@ -994,8 +944,10 @@ static int siu_probe(struct device *dev)
port->dev = dev;
retval = uart_add_one_port(&siu_uart_driver, port);
if (retval)
if (retval < 0) {
port->dev = NULL;
break;
}
}
if (i == 0 && retval < 0) {

28
drivers/usb/core/sysfs.c
View File

@ -290,32 +290,30 @@ static ssize_t show_modalias(struct device *dev, char *buf)
{
struct usb_interface *intf;
struct usb_device *udev;
int len;
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
if (udev->descriptor.bDeviceClass == 0) {
struct usb_host_interface *alt = intf->cur_altsetting;
return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
le16_to_cpu(udev->descriptor.bcdDevice),
udev->descriptor.bDeviceClass,
udev->descriptor.bDeviceSubClass,
udev->descriptor.bDeviceProtocol,
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
alt->desc.bInterfaceProtocol);
} else {
return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n",
len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
le16_to_cpu(udev->descriptor.bcdDevice),
udev->descriptor.bDeviceClass,
udev->descriptor.bDeviceSubClass,
udev->descriptor.bDeviceProtocol);
}
buf += len;
if (udev->descriptor.bDeviceClass == 0) {
struct usb_host_interface *alt = intf->cur_altsetting;
return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
alt->desc.bInterfaceClass,
alt->desc.bInterfaceSubClass,
alt->desc.bInterfaceProtocol);
} else {
return len + sprintf(buf, "*isc*ip*\n");
}
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);

18
drivers/usb/input/hid-core.c
View File

@ -1315,6 +1315,8 @@ void hid_init_reports(struct hid_device *hid)
#define USB_DEVICE_ID_WACOM_INTUOS2 0x0040
#define USB_DEVICE_ID_WACOM_VOLITO 0x0060
#define USB_DEVICE_ID_WACOM_PTU 0x0003
#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0
#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
@ -1401,6 +1403,7 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_DELORME 0x1163
#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
@ -1412,6 +1415,12 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_BTC 0x046e
#define USB_DEVICE_ID_BTC_KEYBOARD 0x5303
#define USB_VENDOR_ID_VERNIER 0x08f7
#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
/*
* Alphabetically sorted blacklist by quirk type.
@ -1437,6 +1446,7 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
@ -1456,6 +1466,10 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
@ -1481,6 +1495,10 @@ static struct hid_blacklist {
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },

143
drivers/usb/media/pwc/ChangeLog
View File

@ -1,143 +0,0 @@
9.0.2
* Adding #ifdef to compile PWC before and after 2.6.5
9.0.1
9.0
8.12
* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
8.11.1
* Fix for PCVC720/40, would not be able to set videomode
* Fix for Samsung MPC models, appearantly they are based on a newer chipset
8.11
* 20 dev_hints (per request)
* Hot unplugging should be better, no more dangling pointers or memory leaks
* Added reserved Logitech webcam IDs
* Device now remembers size & fps between close()/open()
* Removed palette stuff altogether
8.10.1
* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
8.10
* Fixed ID for QuickCam Notebook pro
* Added GREALSIZE ioctl() call
* Fixed bug in case PWCX was not loaded and invalid size was set
8.9
* Merging with kernel 2.5.49
* Adding IDs for QuickCam Zoom & QuickCam Notebook
8.8
* Fixing 'leds' parameter
* Adding IDs for Logitech QuickCam Pro 4000
* Making URB init/cleanup a little nicer
8.7
* Incorporating changes in ioctl() parameter passing
* Also changes to URB mechanism
8.6
* Added ID's for Visionite VCS UM100 and UC300
* Removed YUV420-interlaced palette altogether (was confusing)
* Removed MIRROR stuff as it didn't work anyway
* Fixed a problem with the 'leds' parameter (wouldn't blink)
* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
* VIDIOCGCAP.name now contains real camera model name instead of
'Philips xxx webcam'
* Added PROBE ioctl (see previous point & API doc)
8.5
* Adding IDs for Creative Labs Webcam 5
* Adding IDs for SOTEC CMS-001 webcam
* Solving possible hang in VIDIOCSYNC when unplugging the cam
* Forgot to return structure in VIDIOCPWCGAWB, oops
* Time interval for the LEDs are now in milliseconds
8.4
* Fixing power_save option for Vesta range
* Handling new error codes in ISOC callback
* Adding dev_hint module parameter, to specify /dev/videoX device nodes
8.3
* Adding Samsung C10 and C30 cameras
* Removing palette module parameter
* Fixed typo in ID of QuickCam 3000 Pro
* Adding LED settings (blinking while in use) for ToUCam cameras.
* Turns LED off when camera is not in use.
8.2
* Making module more silent when trace = 0
* Adding QuickCam 3000 Pro IDs
* Chrominance control for the Vesta cameras
* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
* Included Oliver Neukem's lock_kernel() patch
* Allocates less memory for image buffers
* Adds ioctl()s for the whitebalancing
8.1
* Adding support for 750
* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
8.0
* 'damage control' after inclusion in 2.4.5.
* Changed wait-queue mechanism in read/mmap/poll according to the book.
* Included YUV420P palette.
* Changed interface to decompressor module.
* Cleaned up pwc structure a bit.
7.0
* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
* There is now a clear error message when an image size is selected that
is only supported using the decompressor, and the decompressor isn't
loaded.
* When the decompressor wasn't loaded, selecting large image size
would create skewed or double images.
6.3
* Introduced spinlocks for the buffer pointer manipulation; a number of
reports seem to suggest the down()/up() semaphores were the cause of
lockups, since they are not suitable for interrupt/user locking.
* Separated decompressor and core code into 2 modules.
6.2
* Non-integral image sizes are now padded with gray or black.
* Added SHUTTERSPEED ioctl().
* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
even though the call succeeded.
* Added hotplug support for 2.4.*.
* Memory: the 645/646 uses less memory now.
6.1
* VIDIOCSPICT returns -EINVAL with invalid palettes.
* Added saturation control.
* Split decompressors from rest.
* Fixed bug that would reset the framerate to the default framerate if
the rate field was set to 0 (which is not what I intended, nl. do not
change the framerate!).
* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
* Workaround for a bug in the 730 sensor.

2
drivers/usb/net/usbnet.c
View File

@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf)
}
/* expect bcdVersion 1.0, ignore */
if (memcmp(&desc->bGUID, blan_guid, 16)
&& memcmp(&desc->bGUID, blan_guid, 16) ) {
&& memcmp(&desc->bGUID, safe_guid, 16) ) {
/* hey, this one might _really_ be MDLM! */
dev_dbg (&intf->dev, "MDLM guid\n");
goto bad_desc;

11
drivers/usb/serial/Kconfig
View File

@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
config USB_SERIAL_OPTION
tristate "USB Option PCMCIA serial driver"
depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
help
Say Y here if you want to use an Option card. This is a
GSM card, controlled by three serial ports which are connected
via an OHCI adapter located on a PC card.
To compile this driver as a module, choose M here: the
module will be called option.
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL

1
drivers/usb/serial/Makefile
View File

@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o

379
drivers/usb/serial/cp2101.c
View File

@ -7,6 +7,14 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* Support to set flow control line levels using TIOCMGET and TIOCMSET
* thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
* control thanks to Munir Nassar nassarmu@real-time.com
*
* Outstanding Issues:
* Buffers are not flushed when the port is opened.
* Multiple calls to write() may fail with "Resource temporarily unavailable"
*
*/
#include <linux/config.h>
@ -24,7 +32,7 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v0.03"
#define DRIVER_VERSION "v0.04"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*);
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
unsigned int, unsigned int);
static void cp2101_break_ctl(struct usb_serial_port*, int);
static int cp2101_startup (struct usb_serial *);
static void cp2101_shutdown(struct usb_serial*);
@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*);
static int debug;
static struct usb_device_id id_table [] = {
{USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/
{USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/
{ } /* Terminating Entry*/
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE (usb, id_table);
@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = {
.close = cp2101_close,
.break_ctl = cp2101_break_ctl,
.set_termios = cp2101_set_termios,
.tiocmget = cp2101_tiocmget,
.tiocmset = cp2101_tiocmset,
.attach = cp2101_startup,
.shutdown = cp2101_shutdown,
};
/*Config request types*/
/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
/*Config SET requests. To GET, add 1 to the request number*/
#define CP2101_UART 0x00 /*Enable / Disable*/
#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/
#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/
#define CP2101_BREAK 0x05 /*On / Off*/
#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/
#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/
#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/
/* Config SET requests. To GET, add 1 to the request number */
#define CP2101_UART 0x00 /* Enable / Disable */
#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
#define CP2101_BREAK 0x05 /* On / Off */
#define CP2101_CONTROL 0x07 /* Flow control line states */
#define CP2101_MODEMCTL 0x13 /* Modem controls */
#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
/*CP2101_UART*/
/* CP2101_UART */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
/*CP2101_BAUDRATE*/
/* CP2101_BAUDRATE */
#define BAUD_RATE_GEN_FREQ 0x384000
/*CP2101_BITS*/
/* CP2101_BITS */
#define BITS_DATA_MASK 0X0f00
#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
#define BITS_DATA_7 0X0700
#define BITS_DATA_8 0X0800
@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = {
#define BITS_STOP_1 0x0000
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
/* CP2101_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
/* CP2101_CONTROL */
#define CONTROL_DTR 0x0001
#define CONTROL_RTS 0x0002
#define CONTROL_CTS 0x0010
#define CONTROL_DSR 0x0020
#define CONTROL_RING 0x0040
#define CONTROL_DCD 0x0080
#define CONTROL_WRITE_DTR 0x0100
#define CONTROL_WRITE_RTS 0x0200
static int cp2101_get_config(struct usb_serial_port* port, u8 request)
/*
* cp2101_get_config
* Reads from the CP2101 configuration registers
* 'size' is specified in bytes.
* 'data' is a pointer to a pre-allocated array of integers large
* enough to hold 'size' bytes (with 4 bytes to each integer)
*/
static int cp2101_get_config(struct usb_serial_port* port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
unsigned char buf[4];
unsigned int value;
int result, i;
u32 *buf;
int result, i, length;
/*For get requests, the request number must be incremented*/
/* Number of integers required to contain the array */
length = (((size - 1) | 3) + 1)/4;
buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
memset(buf, 0, length * sizeof(u32));
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
return -ENOMEM;
}
/* For get requests, the request number must be incremented */
request++;
/*Issue the request, attempting to read 4 bytes*/
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
0, buf, 4, 300);
0, buf, size, 300);
if (result < 0) {
/* Convert data into an array of integers */
for (i=0; i<length; i++)
data[i] = le32_to_cpu(buf[i]);
kfree(buf);
if (result != size) {
dev_err(&port->dev, "%s - Unable to send config request, "
"request=0x%x result=%d\n",
__FUNCTION__, request, result);
return result;
"request=0x%x size=%d result=%d\n",
__FUNCTION__, request, size, result);
return -EPROTO;
}
/*Assemble each byte read into an integer value*/
value = 0;
for (i=0; i<4 && i<result; i++)
value |= (buf[i] << (i * 8));
dbg( " %s - request=0x%x result=%d value=0x%x",
__FUNCTION__, request, result, value);
return value;
}
static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
{
struct usb_serial *serial = port->serial;
int result;
result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, value,
0, NULL, 0, 300);
if (result <0) {
dev_err(&port->dev, "%s - Unable to send config request, "
"request=0x%x value=0x%x result=%d\n",
__FUNCTION__, request, value, result);
return result;
}
dbg(" %s - request=0x%x value=0x%x result=%d",
__FUNCTION__, request, value, result);
return 0;
}
/*
* cp2101_set_config
* Writes to the CP2101 configuration registers
* Values less than 16 bits wide are sent directly
* 'size' is specified in bytes.
*/
static int cp2101_set_config(struct usb_serial_port* port, u8 request,
unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
u32 *buf;
int result, i, length;
/* Number of integers required to contain the array */
length = (((size - 1) | 3) + 1)/4;
buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
if (!buf) {
dev_err(&port->dev, "%s - out of memory.\n",
__FUNCTION__);
return -ENOMEM;
}
/* Array of integers into bytes */
for (i = 0; i < length; i++)
buf[i] = cpu_to_le32(data[i]);
if (size > 2) {
result = usb_control_msg (serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, 0x0000,
0, buf, size, 300);
} else {
result = usb_control_msg (serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
0, NULL, 0, 300);
}
kfree(buf);
if ((size > 2 && result != size) || result < 0) {
dev_err(&port->dev, "%s - Unable to send request, "
"request=0x%x size=%d result=%d\n",
__FUNCTION__, request, size, result);
return -EPROTO;
}
/* Single data value */
result = usb_control_msg (serial->dev,
usb_sndctrlpipe(serial->dev, 0),
request, REQTYPE_HOST_TO_DEVICE, data[0],
0, NULL, 0, 300);
return 0;
}
/*
* cp2101_set_config_single
* Convenience function for calling cp2101_set_config on single data values
* without requiring an integer pointer
*/
static inline int cp2101_set_config_single(struct usb_serial_port* port,
u8 request, unsigned int data)
{
return cp2101_set_config(port, request, &data, 2);
}
static int cp2101_open (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
dbg("%s - port %d", __FUNCTION__, port->number);
if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__FUNCTION__);
return -EPROTO;
@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
return result;
}
/*Configure the termios structure*/
/* Configure the termios structure */
cp2101_get_termios(port);
/* Set the DTR and RTS pins low */
cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
return 0;
}
@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
cp2101_set_config(port, CP2101_UART, UART_DISABLE);
cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
}
/* cp2101_get_termios*/
/* Reads the baud rate, data bits, parity and stop bits from the device*/
/* Corrects any unsupported values*/
/* Configures the termios structure to reflect the state of the device*/
/*
* cp2101_get_termios
* Reads the baud rate, data bits, parity, stop bits and flow control mode
* from the device, corrects any unsupported values, and configures the
* termios structure to reflect the state of the device
*/
static void cp2101_get_termios (struct usb_serial_port *port)
{
unsigned int cflag;
unsigned int cflag, modem_ctl[4];
int baud;
int bits;
@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port)
}
cflag = port->tty->termios->c_cflag;
baud = cp2101_get_config(port, CP2101_BAUDRATE);
/*Convert to baudrate*/
cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
/* Convert to baudrate */
if (baud)
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
cflag &= ~CBAUD;
switch (baud) {
/* The baud rates which are commented out below
/*
* The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port)
dbg("%s - Baud rate is not supported, "
"using 9600 baud", __FUNCTION__);
cflag |= B9600;
cp2101_set_config(port, CP2101_BAUDRATE,
cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ/9600));
break;
}
bits = cp2101_get_config(port, CP2101_BITS);
cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
switch(bits & BITS_DATA_MASK) {
case BITS_DATA_5:
dbg("%s - data bits = 5", __FUNCTION__);
cflag |= CS5;
break;
case BITS_DATA_6:
dbg("%s - data bits = 6", __FUNCTION__);
cflag |= CS6;
@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, "
@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port)
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, "
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, "
"disabling parity", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
break;
case BITS_STOP_1_5:
dbg("%s - stop bits = 1.5 (not supported, "
"using 1 stop bit", __FUNCTION__);
"using 1 stop bit)", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __FUNCTION__);
@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port)
dbg("%s - Unknown number of stop bits, "
"using 1 stop bit", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
cp2101_set_config(port, CP2101_BITS, bits);
cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
if (modem_ctl[0] & 0x0008) {
dbg("%s - flow control = CRTSCTS", __FUNCTION__);
cflag |= CRTSCTS;
} else {
dbg("%s - flow control = NONE", __FUNCTION__);
cflag &= ~CRTSCTS;
}
port->tty->termios->c_cflag = cflag;
}
@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
struct termios *old_termios)
{
unsigned int cflag, old_cflag=0;
int baud=0;
int bits;
int baud=0, bits;
unsigned int modem_ctl[4];
dbg("%s - port %d", __FUNCTION__, port->number);
@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
}
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something */
/* Check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
/* If the baud rate is to be updated*/
if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
switch (cflag & CBAUD) {
/* The baud rates which are commented out below
/*
* The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port,
if (baud) {
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
if (cp2101_set_config(port, CP2101_BAUDRATE,
if (cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ / baud)))
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
}
}
/*If the number of data bits is to be updated*/
/* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
bits = cp2101_get_config(port, CP2101_BITS);
cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
case CS5:
bits |= BITS_DATA_5;
dbg("%s - data bits = 5", __FUNCTION__);
break;
case CS6:
bits |= BITS_DATA_6;
dbg("%s - data bits = 6", __FUNCTION__);
@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
bits |= BITS_DATA_8;
break;
}
if (cp2101_set_config(port, CP2101_BITS, bits))
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
bits = cp2101_get_config(port, CP2101_BITS);
cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
dbg("%s - parity = EVEN", __FUNCTION__);
}
}
if (cp2101_set_config(port, CP2101_BITS, bits))
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
bits = cp2101_get_config(port, CP2101_BITS);
cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port,
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __FUNCTION__);
}
if (cp2101_set_config(port, CP2101_BITS, bits))
if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of stop bits requested "
"not supported by device\n");
}
if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__FUNCTION__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
if (cflag & CRTSCTS) {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x09;
modem_ctl[1] = 0x80;
dbg("%s - flow control = CRTSCTS", __FUNCTION__);
} else {
modem_ctl[0] &= ~0x7B;
modem_ctl[0] |= 0x01;
modem_ctl[1] |= 0x40;
dbg("%s - flow control = NONE", __FUNCTION__);
}
dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
__FUNCTION__, modem_ctl[0], modem_ctl[1],
modem_ctl[2], modem_ctl[3]);
cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
}
}
static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
int control = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
if (set & TIOCM_RTS) {
control |= CONTROL_RTS;
control |= CONTROL_WRITE_RTS;
}
if (set & TIOCM_DTR) {
control |= CONTROL_DTR;
control |= CONTROL_WRITE_DTR;
}
if (clear & TIOCM_RTS) {
control &= ~CONTROL_RTS;
control |= CONTROL_WRITE_RTS;
}
if (clear & TIOCM_DTR) {
control &= ~CONTROL_DTR;
control |= CONTROL_WRITE_DTR;
}
dbg("%s - control = 0x%.4x", __FUNCTION__, control);
return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
}
static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
{
int control, result;
dbg("%s - port %d", __FUNCTION__, port->number);
cp2101_get_config(port, CP2101_CONTROL, &control, 1);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
|((control & CONTROL_RING)? TIOCM_RI : 0)
|((control & CONTROL_DCD) ? TIOCM_CD : 0);
dbg("%s - control = 0x%.2x", __FUNCTION__, control);
return result;
}
static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
{
u16 state;
int state;
dbg("%s - port %d", __FUNCTION__, port->number);
if (break_state == 0)
@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
state = BREAK_ON;
dbg("%s - turning break %s", __FUNCTION__,
state==BREAK_OFF ? "off" : "on");
cp2101_set_config(port, CP2101_BREAK, state);
cp2101_set_config(port, CP2101_BREAK, &state, 2);
}
static int cp2101_startup (struct usb_serial *serial)
{
/*CP2101 buffers behave strangely unless device is reset*/
/* CP2101 buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial)
dbg("%s", __FUNCTION__);
/* stop reads and writes on all ports */
/* Stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
cp2101_cleanup(serial->port[i]);
}
@ -560,16 +747,16 @@ static int __init cp2101_init (void)
retval = usb_serial_register(&cp2101_device);
if (retval)
return retval; /*Failed to register*/
return retval; /* Failed to register */
retval = usb_register(&cp2101_driver);
if (retval) {
/*Failed to register*/
/* Failed to register */
usb_serial_deregister(&cp2101_device);
return retval;
}
/*Success*/
/* Success */
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
}

729
drivers/usb/serial/option.c Normal file
View File

@ -0,0 +1,729 @@
/*
Option Card (PCMCIA to) USB to Serial Driver
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
This driver is free software; you can redistribute it and/or modify
it under the terms of Version 2 of the GNU General Public License as
published by the Free Software Foundation.
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
History:
2005-05-19 v0.1 Initial version, based on incomplete docs
and analysis of misbehavior of the standard driver
2005-05-20 v0.2 Extended the input buffer to avoid losing
random 64-byte chunks of data
2005-05-21 v0.3 implemented chars_in_buffer()
turned on low_latency
simplified the code somewhat
*/
#define DRIVER_VERSION "v0.3"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
/* Function prototypes */
static int option_open (struct usb_serial_port *port, struct file *filp);
static void option_close (struct usb_serial_port *port, struct file *filp);
static int option_startup (struct usb_serial *serial);
static void option_shutdown (struct usb_serial *serial);
static void option_rx_throttle (struct usb_serial_port *port);
static void option_rx_unthrottle (struct usb_serial_port *port);
static int option_write_room (struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
static int option_write (struct usb_serial_port *port,
const unsigned char *buf, int count);
static int option_chars_in_buffer (struct usb_serial_port *port);
static int option_ioctl (struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg);
static void option_set_termios (struct usb_serial_port *port,
struct termios *old);
static void option_break_ctl (struct usb_serial_port *port, int break_state);
static int option_tiocmget (struct usb_serial_port *port, struct file *file);
static int option_tiocmset (struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup (struct usb_serial_port *port);
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define OPTION_PRODUCT_OLD 0x5000
#define OPTION_PRODUCT_WLAN 0x6000
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
static struct usb_driver option_driver = {
.owner = THIS_MODULE,
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = option_ids,
};
/* The card has three separate interfaces, wich the serial driver
* recognizes separately, thus num_port=1.
*/
static struct usb_serial_device_type option_3port_device = {
.owner = THIS_MODULE,
.name = "Option 3-port card",
.short_name = "option",
.id_table = option_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1, /* 3 */
.open = option_open,
.close = option_close,
.write = option_write,
.write_room = option_write_room,
.chars_in_buffer = option_chars_in_buffer,
.throttle = option_rx_throttle,
.unthrottle = option_rx_unthrottle,
.ioctl = option_ioctl,
.set_termios = option_set_termios,
.break_ctl = option_break_ctl,
.tiocmget = option_tiocmget,
.tiocmset = option_tiocmset,
.attach = option_startup,
.shutdown = option_shutdown,
.read_int_callback = option_instat_callback,
};
static int debug;
/* per port private data */
#define N_IN_URB 4
#define N_OUT_URB 1
#define IN_BUFLEN 1024
#define OUT_BUFLEN 1024
struct option_port_private {
/* Input endpoints and buffer for this port */
struct urb *in_urbs[N_IN_URB];
char in_buffer[N_IN_URB][IN_BUFLEN];
/* Output endpoints and buffer for this port */
struct urb *out_urbs[N_OUT_URB];
char out_buffer[N_OUT_URB][OUT_BUFLEN];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
int dtr_state;
int cts_state; /* Handshaking pins (inputs) */
int dsr_state;
int dcd_state;
int ri_state;
// int break_on;
unsigned long tx_start_time[N_OUT_URB];
};
/* Functions used by new usb-serial code. */
static int __init
option_init (void)
{
int retval;
retval = usb_serial_register(&option_3port_device);
if (retval)
goto failed_3port_device_register;
retval = usb_register(&option_driver);
if (retval)
goto failed_driver_register;
info(DRIVER_DESC ": " DRIVER_VERSION);
return 0;
failed_driver_register:
usb_serial_deregister (&option_3port_device);
failed_3port_device_register:
return retval;
}
static void __exit
option_exit (void)
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_3port_device);
}
module_init(option_init);
module_exit(option_exit);
static void
option_rx_throttle (struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void
option_rx_unthrottle (struct usb_serial_port *port)
{
dbg("%s", __FUNCTION__);
}
static void
option_break_ctl (struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
dbg("%s", __FUNCTION__);
}
static void
option_set_termios (struct usb_serial_port *port,
struct termios *old_termios)
{
dbg("%s", __FUNCTION__);
option_send_setup(port);
}
static int
option_tiocmget(struct usb_serial_port *port, struct file *file)
{
unsigned int value;
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
((portdata->dtr_state) ? TIOCM_DTR : 0) |
((portdata->cts_state) ? TIOCM_CTS : 0) |
((portdata->dsr_state) ? TIOCM_DSR : 0) |
((portdata->dcd_state) ? TIOCM_CAR : 0) |
((portdata->ri_state) ? TIOCM_RNG : 0);
return value;
}
static int
option_tiocmset (struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
if (set & TIOCM_RTS)
portdata->rts_state = 1;
if (set & TIOCM_DTR)
portdata->dtr_state = 1;
if (clear & TIOCM_RTS)
portdata->rts_state = 0;
if (clear & TIOCM_DTR)
portdata->dtr_state = 0;
return option_send_setup(port);
}
static int
option_ioctl (struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
return -ENOIOCTLCMD;
}
/* Write */
static int
option_write(struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct option_port_private *portdata;
int i;
int left, todo;
struct urb *this_urb = NULL; /* spurious */
int err;
portdata = usb_get_serial_port_data(port);
dbg("%s: write (%d chars)", __FUNCTION__, count);
#if 0
spin_lock(&port->lock);
if (port->write_urb_busy) {
spin_unlock(&port->lock);
dbg("%s: already writing", __FUNCTION__);
return 0;
}
port->write_urb_busy = 1;
spin_unlock(&port->lock);
#endif
i = 0;
left = count;
while (left>0) {
todo = left;
if (todo > OUT_BUFLEN)
todo = OUT_BUFLEN;
for (;i < N_OUT_URB; i++) {
/* Check we have a valid urb/endpoint before we use it... */
this_urb = portdata->out_urbs[i];
if (this_urb->status != -EINPROGRESS)
break;
if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
continue;
if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
continue;
this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
}
if (i == N_OUT_URB) {
/* no bulk out free! */
dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
#if 0
port->write_urb_busy = 0;
#endif
return count-left;
}
dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
memcpy (this_urb->transfer_buffer, buf, todo);
/* send the data out the bulk port */
this_urb->transfer_buffer_length = todo;
this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
buf += todo;
left -= todo;
}
count -= left;
#if 0
port->write_urb_busy = 0;
#endif
dbg("%s: wrote (did %d)", __FUNCTION__, count);
return count;
}
static void
option_indat_callback (struct urb *urb, struct pt_regs *regs)
{
int i, err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
dbg("%s: %p", __FUNCTION__, urb);
endpoint = usb_pipeendpoint(urb->pipe);
port = (struct usb_serial_port *) urb->context;
if (urb->status) {
dbg("%s: nonzero status: %d on endpoint %02x.",
__FUNCTION__, urb->status, endpoint);
} else {
tty = port->tty;
if (urb->actual_length) {
for (i = 0; i < urb->actual_length ; ++i) {
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
tty_flip_buffer_push(tty);
tty_insert_flip_char(tty, data[i], 0);
}
tty_flip_buffer_push(tty);
} else {
dbg("%s: empty read urb received", __FUNCTION__);
}
/* Resubmit urb so we continue receiving */
if (port->open_count && urb->status != -ESHUTDOWN) {
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
}
}
return;
}
static void
option_outdat_callback (struct urb *urb, struct pt_regs *regs)
{
struct usb_serial_port *port;
dbg("%s", __FUNCTION__);
port = (struct usb_serial_port *) urb->context;
if (port->open_count)
schedule_work(&port->work);
}
static void
option_instat_callback (struct urb *urb, struct pt_regs *regs)
{
int err;
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
dbg("%s", __FUNCTION__);
dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
if (urb->status == 0) {
struct usb_ctrlrequest *req_pkt =
(struct usb_ctrlrequest *)urb->transfer_buffer;
if (!req_pkt) {
dbg("%s: NULL req_pkt\n", __FUNCTION__);
return;
}
if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
int old_dcd_state;
unsigned char signals = *((unsigned char *)
urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
dbg("%s: signal x%x", __FUNCTION__, signals);
old_dcd_state = portdata->dcd_state;
portdata->cts_state = 1;
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
if (port->tty && !C_CLOCAL(port->tty)
&& old_dcd_state && !portdata->dcd_state) {
tty_hangup(port->tty);
}
} else
dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
} else
dbg("%s: error %d", __FUNCTION__, urb->status);
/* Resubmit urb so we continue receiving IRQ data */
if (urb->status != -ESHUTDOWN) {
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
}
}
static int
option_write_room (struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++)
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status != -EINPROGRESS)
data_len += OUT_BUFLEN;
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int
option_chars_in_buffer (struct usb_serial_port *port)
{
struct option_port_private *portdata;
int i;
int data_len = 0;
struct urb *this_urb;
portdata = usb_get_serial_port_data(port);
for (i=0; i < N_OUT_URB; i++)
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status == -EINPROGRESS)
data_len += this_urb->transfer_buffer_length;
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
static int
option_open (struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
portdata = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
/* Set some sane defaults */
portdata->rts_state = 1;
portdata->dtr_state = 1;
/* Reset low level data toggle and start reading from endpoints */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (! urb)
continue;
if (urb->dev != serial->dev) {
dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
continue;
}
/* make sure endpoint data toggle is synchronized with the device */
usb_clear_halt(urb->dev, urb->pipe);
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
urb->transfer_buffer_length);
}
}
/* Reset low level data toggle on out endpoints */
for (i = 0; i < N_OUT_URB; i++) {
urb = portdata->out_urbs[i];
if (! urb)
continue;
urb->dev = serial->dev;
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
}
port->tty->low_latency = 1;
option_send_setup(port);
return (0);
}
static inline void
stop_urb(struct urb *urb)
{
if (urb && urb->status == -EINPROGRESS) {
urb->transfer_flags &= ~URB_ASYNC_UNLINK;
usb_kill_urb(urb);
}
}
static void
option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
portdata->rts_state = 0;
portdata->dtr_state = 0;
if (serial->dev) {
option_send_setup(port);
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
stop_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
stop_urb(portdata->out_urbs[i]);
}
port->tty = NULL;
}
/* Helper functions used by option_setup_urbs */
static struct urb *
option_setup_urb (struct usb_serial *serial, int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback)(struct urb *, struct pt_regs *regs))
{
struct urb *urb;
if (endpoint == -1)
return NULL; /* endpoint not needed */
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
return NULL;
}
/* Fill URB using supplied data. */
usb_fill_bulk_urb(urb, serial->dev,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
return urb;
}
/* Setup urbs */
static void
option_setup_urbs(struct usb_serial *serial)
{
int j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
port = serial->port[0];
portdata = usb_get_serial_port_data(port);
/* Do indat endpoints first */
for (j = 0; j <= N_IN_URB; ++j) {
portdata->in_urbs[j] = option_setup_urb (serial,
port->bulk_in_endpointAddress, USB_DIR_IN, port,
portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
}
/* outdat endpoints */
for (j = 0; j <= N_OUT_URB; ++j) {
portdata->out_urbs[j] = option_setup_urb (serial,
port->bulk_out_endpointAddress, USB_DIR_OUT, port,
portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
}
}
static int
option_send_setup(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
if (port->tty) {
int val = 0;
if (portdata->dtr_state)
val |= 0x01;
if (portdata->rts_state)
val |= 0x02;
return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
}
return 0;
}
static int
option_startup (struct usb_serial *serial)
{
int i, err;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Now setup per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
if (!portdata) {
dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
return (1);
}
memset(portdata, 0, sizeof(struct option_port_private));
usb_set_serial_port_data(port, portdata);
if (! port->interrupt_in_urb)
continue;
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (err)
dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
}
option_setup_urbs(serial);
return (0);
}
static void
option_shutdown (struct usb_serial *serial)
{
int i, j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++)
stop_urb(portdata->in_urbs[j]);
for (j = 0; j < N_OUT_URB; j++)
stop_urb(portdata->out_urbs[j]);
}
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++) {
if (portdata->in_urbs[j]) {
usb_free_urb(portdata->in_urbs[j]);
portdata->in_urbs[j] = NULL;
}
}
for (j = 0; j < N_OUT_URB; j++) {
if (portdata->out_urbs[j]) {
usb_free_urb(portdata->out_urbs[j]);
portdata->out_urbs[j] = NULL;
}
}
}
/* Now free per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
kfree(usb_get_serial_port_data(port));
}
}
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");

9
drivers/usb/storage/unusual_devs.h
View File

@ -862,6 +862,15 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
/* Reported by Filippo Bardelli <filibard@libero.it>
* The device reports a subclass of RBC, which is wrong.
*/
UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
"Trumpion Microelectronics, Inc.",
"33520 USB Digital Voice Recorder",
US_SC_UFI, US_PR_DEVICE, NULL,
0),
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",

5
fs/jbd/checkpoint.c
View File

@ -188,7 +188,6 @@ static int __cleanup_transaction(journal_t *journal, transaction_t *transaction)
} else {
jbd_unlock_bh_state(bh);
}
jh = next_jh;
} while (jh != last_jh);
return ret;
@ -339,8 +338,10 @@ int log_do_checkpoint(journal_t *journal)
}
} while (jh != last_jh && !retry);
if (batch_count)
if (batch_count) {
__flush_batch(journal, bhs, &batch_count);
retry = 1;
}
/*
* If someone cleaned up this transaction while we slept, we're

5
fs/mpage.c
View File

@ -79,8 +79,11 @@ static int mpage_end_io_write(struct bio *bio, unsigned int bytes_done, int err)
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
if (!uptodate)
if (!uptodate){
SetPageError(page);
if (page->mapping)
set_bit(AS_EIO, &page->mapping->flags);
}
end_page_writeback(page);
} while (bvec >= bio->bi_io_vec);
bio_put(bio);

186
include/asm-ppc64/processor.h
View File

@ -120,103 +120,18 @@
/* Special Purpose Registers (SPRNs)*/
#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
#define DABR_TRANSLATION (1UL << 2)
#define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
#define DBCR_EDM 0x80000000
#define DBCR_IDM 0x40000000
#define DBCR_RST(x) (((x) & 0x3) << 28)
#define DBCR_RST_NONE 0
#define DBCR_RST_CORE 1
#define DBCR_RST_CHIP 2
#define DBCR_RST_SYSTEM 3
#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
#define DBCR_EDE 0x02000000 /* Exception Debug Event */
#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
#define DAC_BYTE 0
#define DAC_HALF 1
#define DAC_WORD 2
#define DAC_QUAD 3
#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
#define DBCR_SIA 0x00000008 /* Second IAC Enable */
#define DBCR_SDA 0x00000004 /* Second DAC Enable */
#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
#define SPRN_DBSR 0x3F0 /* Debug Status Register */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define DCCR_NOCACHE 0 /* Noncacheable */
#define DCCR_CACHE 1 /* Cacheable */
#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
#define DCWR_COPY 0 /* Copy-back */
#define DCWR_WRITE 1 /* Write-through */
#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#define SPRN_DEC 0x016 /* Decrement Register */
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
#define SPRN_EAR 0x11A /* External Address Register */
#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
#define HID0_SBCLK (1<<27)
#define HID0_EICE (1<<26)
#define HID0_ECLK (1<<25)
#define HID0_PAR (1<<24)
#define HID0_DOZE (1<<23)
#define HID0_NAP (1<<22)
#define HID0_SLEEP (1<<21)
#define HID0_DPM (1<<20)
#define HID0_ICE (1<<15) /* Instruction Cache Enable */
#define HID0_DCE (1<<14) /* Data Cache Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
#define HID0_DLOCK (1<<12) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCI (1<<10) /* Data Cache Invalidate */
#define HID0_SPD (1<<9) /* Speculative disable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
#define HID0_BHTE (1<<2) /* Branch History Table Enable */
#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
@ -225,23 +140,8 @@
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_TSC 0x3FD /* Thread switch control */
#define SPRN_TST 0x3FC /* Thread switch timeout */
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
#define ICCR_NOCACHE 0 /* Noncacheable */
#define ICCR_CACHE 1 /* Cacheable */
#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
#define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */
@ -249,9 +149,6 @@
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
#define SGR_NORMAL 0
#define SGR_GUARDED 1
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
@ -264,50 +161,12 @@
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */
#define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
#define SPRN_TCR 0x3DA /* Timer Control Register */
#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
#define WP_2_17 0 /* 2^17 clocks */
#define WP_2_21 1 /* 2^21 clocks */
#define WP_2_25 2 /* 2^25 clocks */
#define WP_2_29 3 /* 2^29 clocks */
#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
#define WRC_NONE 0 /* No reset will occur */
#define WRC_CORE 1 /* Core reset will occur */
#define WRC_CHIP 2 /* Chip reset will occur */
#define WRC_SYSTEM 3 /* System reset will occur */
#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
#define FP_2_9 0 /* 2^9 clocks */
#define FP_2_13 1 /* 2^13 clocks */
#define FP_2_17 2 /* 2^17 clocks */
#define FP_2_21 3 /* 2^21 clocks */
#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
#define TCR_ARE 0x00400000 /* Auto Reload Enable */
#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
#define THRM1_TIN (1<<0)
#define THRM1_TIV (1<<1)
#define THRM1_THRES (0x7f<<2)
#define THRM1_TID (1<<29)
#define THRM1_TIE (1<<30)
#define THRM1_V (1<<31)
#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
#define THRM3_E (1<<31)
#define SPRN_TSR 0x3D8 /* Timer Status Register */
#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
#define WRS_NONE 0 /* No WDT reset occurred */
#define WRS_CORE 1 /* WDT forced core reset */
#define WRS_CHIP 2 /* WDT forced chip reset */
#define WRS_SYSTEM 3 /* WDT forced system reset */
#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
#define SPRN_VRSAVE 0x100 /* Vector save */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_RUNLATCH 0x1
/* Performance monitor SPRs */
#define SPRN_SIAR 780
@ -352,28 +211,19 @@
#define CTR SPRN_CTR /* Counter Register */
#define DAR SPRN_DAR /* Data Address Register */
#define DABR SPRN_DABR /* Data Address Breakpoint Register */
#define DCMP SPRN_DCMP /* Data TLB Compare Register */
#define DEC SPRN_DEC /* Decrement Register */
#define DMISS SPRN_DMISS /* Data TLB Miss Register */
#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
#define EAR SPRN_EAR /* External Address Register */
#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
#define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */
#define NIADORM SPRN_NIADORM /* NIA Dormant Register */
#define TSC SPRN_TSC /* Thread switch control */
#define TST SPRN_TST /* Thread switch timeout */
#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define __LR SPRN_LR
#define PVR SPRN_PVR /* Processor Version */
#define PIR SPRN_PIR /* Processor ID */
#define PURR SPRN_PURR /* Processor Utilization of Resource Register */
//#define RPA SPRN_RPA /* Required Physical Address Register */
#define SDR1 SPRN_SDR1 /* MMU hash base register */
#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
#define SPR1 SPRN_SPRG1
@ -389,10 +239,6 @@
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
#define ICTC 1019
#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
#define XER SPRN_XER
/* Processor Version Register (PVR) field extraction */
@ -436,12 +282,6 @@
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
/* iSeries CTRL register (for runlatch) */
#define CTRLT 0x098
#define CTRLF 0x088
#define RUNLATCH 0x0001
#ifdef __ASSEMBLY__
#define _GLOBAL(name) \
@ -656,6 +496,24 @@ static inline void prefetchw(const void *x)
#define HAVE_ARCH_PICK_MMAP_LAYOUT
static inline void ppc64_runlatch_on(void)
{
unsigned long ctrl;
ctrl = mfspr(SPRN_CTRLF);
ctrl |= CTRL_RUNLATCH;
mtspr(SPRN_CTRLT, ctrl);
}
static inline void ppc64_runlatch_off(void)
{
unsigned long ctrl;
ctrl = mfspr(SPRN_CTRLF);
ctrl &= ~CTRL_RUNLATCH;
mtspr(SPRN_CTRLT, ctrl);
}
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */

4
include/asm-ppc64/thread_info.h
View File

@ -96,7 +96,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
#define TIF_RUN_LIGHT 6 /* iSeries run light */
/* #define SPARE 6 */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
@ -110,7 +110,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
#define _TIF_RUN_LIGHT (1<<TIF_RUN_LIGHT)
/* #define _SPARE (1<<SPARE) */
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)

2
include/asm-s390/user.h
View File

@ -10,7 +10,7 @@
#define _S390_USER_H
#include <asm/page.h>
#include <linux/ptrace.h>
#include <asm/ptrace.h>
/* Core file format: The core file is written in such a way that gdb
can understand it and provide useful information to the user (under
linux we use the 'trad-core' bfd). There are quite a number of

3
include/linux/if_shaper.h
View File

@ -23,7 +23,7 @@ struct shaper
__u32 shapeclock;
unsigned long recovery; /* Time we can next clock a packet out on
an empty queue */
unsigned long locked;
struct semaphore sem;
struct net_device_stats stats;
struct net_device *dev;
int (*hard_start_xmit) (struct sk_buff *skb,
@ -38,7 +38,6 @@ struct shaper
int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr);
struct net_device_stats* (*get_stats)(struct net_device *dev);
wait_queue_head_t wait_queue;
struct timer_list timer;
};

58
include/linux/libata.h
View File

@ -467,12 +467,34 @@ static inline u8 ata_chk_status(struct ata_port *ap)
return ap->ops->check_status(ap);
}
/**
* ata_pause - Flush writes and pause 400 nanoseconds.
* @ap: Port to wait for.
*
* LOCKING:
* Inherited from caller.
*/
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
ndelay(400);
}
/**
* ata_busy_wait - Wait for a port status register
* @ap: Port to wait for.
*
* Waits up to max*10 microseconds for the selected bits in the port's
* status register to be cleared.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
@ -487,6 +509,18 @@ static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
return status;
}
/**
* ata_wait_idle - Wait for a port to be idle.
* @ap: Port to wait for.
*
* Waits up to 10ms for port's BUSY and DRQ signals to clear.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
@ -525,6 +559,18 @@ static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, uns
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}
/**
* ata_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
* Enable interrupts on a legacy IDE device using MMIO or PIO,
* wait for idle, clear any pending interrupts.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@ -544,6 +590,18 @@ static inline u8 ata_irq_on(struct ata_port *ap)
return tmp;
}
/**
* ata_irq_ack - Acknowledge a device interrupt.
* @ap: Port on which interrupts are enabled.
*
* Wait up to 10 ms for legacy IDE device to become idle (BUSY
* or BUSY+DRQ clear). Obtain dma status and port status from
* device. Clear the interrupt. Return port status.
*
* LOCKING:
*/
static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;

2
include/linux/netdevice.h
View File

@ -204,7 +204,7 @@ struct hh_cache
/* cached hardware header; allow for machine alignment needs. */
#define HH_DATA_MOD 16
#define HH_DATA_OFF(__len) \
(HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1)))
(HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
#define HH_DATA_ALIGN(__len) \
(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
unsigned long hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];

6
include/linux/usb.h
View File

@ -796,6 +796,10 @@ typedef void (*usb_complete_t)(struct urb *, struct pt_regs *);
* of the iso_frame_desc array, and the number of errors is reported in
* error_count. Completion callbacks for ISO transfers will normally
* (re)submit URBs to ensure a constant transfer rate.
*
* Note that even fields marked "public" should not be touched by the driver
* when the urb is owned by the hcd, that is, since the call to
* usb_submit_urb() till the entry into the completion routine.
*/
struct urb
{
@ -803,12 +807,12 @@ struct urb
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
struct list_head urb_list; /* list head for use by the urb owner */
struct usb_device *dev; /* (in) pointer to associated device */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */

2
net/ipv4/ipvs/Makefile
View File

@ -11,7 +11,7 @@ ip_vs_proto-objs-$(CONFIG_IP_VS_PROTO_AH) += ip_vs_proto_ah.o
ip_vs-objs := ip_vs_conn.o ip_vs_core.o ip_vs_ctl.o ip_vs_sched.o \
ip_vs_xmit.o ip_vs_app.o ip_vs_sync.o \
ip_vs_est.o ip_vs_proto.o ip_vs_proto_icmp.o \
ip_vs_est.o ip_vs_proto.o \
$(ip_vs_proto-objs-y)

3
net/ipv4/ipvs/ip_vs_proto.c
View File

@ -216,9 +216,6 @@ int ip_vs_protocol_init(void)
#ifdef CONFIG_IP_VS_PROTO_UDP
REGISTER_PROTOCOL(&ip_vs_protocol_udp);
#endif
#ifdef CONFIG_IP_VS_PROTO_ICMP
REGISTER_PROTOCOL(&ip_vs_protocol_icmp);
#endif
#ifdef CONFIG_IP_VS_PROTO_AH
REGISTER_PROTOCOL(&ip_vs_protocol_ah);
#endif

182
net/ipv4/ipvs/ip_vs_proto_icmp.c
View File

@ -1,182 +0,0 @@
/*
* ip_vs_proto_icmp.c: ICMP load balancing support for IP Virtual Server
*
* Authors: Julian Anastasov <ja@ssi.bg>, March 2002
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation;
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/icmp.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <net/ip_vs.h>
static int icmp_timeouts[1] = { 1*60*HZ };
static char * icmp_state_name_table[1] = { "ICMP" };
static struct ip_vs_conn *
icmp_conn_in_get(const struct sk_buff *skb,
struct ip_vs_protocol *pp,
const struct iphdr *iph,
unsigned int proto_off,
int inverse)
{
#if 0
struct ip_vs_conn *cp;
if (likely(!inverse)) {
cp = ip_vs_conn_in_get(iph->protocol,
iph->saddr, 0,
iph->daddr, 0);
} else {
cp = ip_vs_conn_in_get(iph->protocol,
iph->daddr, 0,
iph->saddr, 0);
}
return cp;
#else
return NULL;
#endif
}
static struct ip_vs_conn *
icmp_conn_out_get(const struct sk_buff *skb,
struct ip_vs_protocol *pp,
const struct iphdr *iph,
unsigned int proto_off,
int inverse)
{
#if 0
struct ip_vs_conn *cp;
if (likely(!inverse)) {
cp = ip_vs_conn_out_get(iph->protocol,
iph->saddr, 0,
iph->daddr, 0);
} else {
cp = ip_vs_conn_out_get(IPPROTO_UDP,
iph->daddr, 0,
iph->saddr, 0);
}
return cp;
#else
return NULL;
#endif
}
static int
icmp_conn_schedule(struct sk_buff *skb, struct ip_vs_protocol *pp,
int *verdict, struct ip_vs_conn **cpp)
{
*verdict = NF_ACCEPT;
return 0;
}
static int
icmp_csum_check(struct sk_buff *skb, struct ip_vs_protocol *pp)
{
if (!(skb->nh.iph->frag_off & __constant_htons(IP_OFFSET))) {
if (skb->ip_summed != CHECKSUM_UNNECESSARY) {
if (ip_vs_checksum_complete(skb, skb->nh.iph->ihl * 4)) {
IP_VS_DBG_RL_PKT(0, pp, skb, 0, "Failed checksum for");
return 0;
}
}
}
return 1;
}
static void
icmp_debug_packet(struct ip_vs_protocol *pp,
const struct sk_buff *skb,
int offset,
const char *msg)
{
char buf[256];
struct iphdr _iph, *ih;
ih = skb_header_pointer(skb, offset, sizeof(_iph), &_iph);
if (ih == NULL)
sprintf(buf, "%s TRUNCATED", pp->name);
else if (ih->frag_off & __constant_htons(IP_OFFSET))
sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u frag",
pp->name, NIPQUAD(ih->saddr),
NIPQUAD(ih->daddr));
else {
struct icmphdr _icmph, *ic;
ic = skb_header_pointer(skb, offset + ih->ihl*4,
sizeof(_icmph), &_icmph);
if (ic == NULL)
sprintf(buf, "%s TRUNCATED to %u bytes\n",
pp->name, skb->len - offset);
else
sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u T:%d C:%d",
pp->name, NIPQUAD(ih->saddr),
NIPQUAD(ih->daddr),
ic->type, ic->code);
}
printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
}
static int
icmp_state_transition(struct ip_vs_conn *cp, int direction,
const struct sk_buff *skb,
struct ip_vs_protocol *pp)
{
cp->timeout = pp->timeout_table[IP_VS_ICMP_S_NORMAL];
return 1;
}
static int
icmp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
{
int num;
char **names;
num = IP_VS_ICMP_S_LAST;
names = icmp_state_name_table;
return ip_vs_set_state_timeout(pp->timeout_table, num, names, sname, to);
}
static void icmp_init(struct ip_vs_protocol *pp)
{
pp->timeout_table = icmp_timeouts;
}
static void icmp_exit(struct ip_vs_protocol *pp)
{
}
struct ip_vs_protocol ip_vs_protocol_icmp = {
.name = "ICMP",
.protocol = IPPROTO_ICMP,
.dont_defrag = 0,
.init = icmp_init,
.exit = icmp_exit,
.conn_schedule = icmp_conn_schedule,
.conn_in_get = icmp_conn_in_get,
.conn_out_get = icmp_conn_out_get,
.snat_handler = NULL,
.dnat_handler = NULL,
.csum_check = icmp_csum_check,
.state_transition = icmp_state_transition,
.register_app = NULL,
.unregister_app = NULL,
.app_conn_bind = NULL,
.debug_packet = icmp_debug_packet,
.timeout_change = NULL,
.set_state_timeout = icmp_set_state_timeout,
};

1
net/ipv6/ipv6_syms.c
View File

@ -37,5 +37,4 @@ EXPORT_SYMBOL(in6_dev_finish_destroy);
EXPORT_SYMBOL(xfrm6_rcv);
#endif
EXPORT_SYMBOL(rt6_lookup);
EXPORT_SYMBOL(fl6_sock_lookup);
EXPORT_SYMBOL(ipv6_push_nfrag_opts);