forked from luck/tmp_suning_uos_patched
pwm: imx: Provide atomic PWM support for i.MX PWMv2
This commit provides apply() callback implementation for i.MX's PWMv2. Suggested-by: Stefan Agner <stefan@agner.ch> Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
parent
73b1ff1f3e
commit
0ca1a11a1d
|
@ -248,6 +248,72 @@ static int imx_pwm_config(struct pwm_chip *chip,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
unsigned long period_cycles, duty_cycles, prescale;
|
||||
struct imx_chip *imx = to_imx_chip(chip);
|
||||
struct pwm_state cstate;
|
||||
unsigned long long c;
|
||||
int ret;
|
||||
|
||||
pwm_get_state(pwm, &cstate);
|
||||
|
||||
if (state->enabled) {
|
||||
c = clk_get_rate(imx->clk_per);
|
||||
c *= state->period;
|
||||
|
||||
do_div(c, 1000000000);
|
||||
period_cycles = c;
|
||||
|
||||
prescale = period_cycles / 0x10000 + 1;
|
||||
|
||||
period_cycles /= prescale;
|
||||
c = (unsigned long long)period_cycles * state->duty_cycle;
|
||||
do_div(c, state->period);
|
||||
duty_cycles = c;
|
||||
|
||||
/*
|
||||
* according to imx pwm RM, the real period value should be
|
||||
* PERIOD value in PWMPR plus 2.
|
||||
*/
|
||||
if (period_cycles > 2)
|
||||
period_cycles -= 2;
|
||||
else
|
||||
period_cycles = 0;
|
||||
|
||||
/*
|
||||
* Wait for a free FIFO slot if the PWM is already enabled, and
|
||||
* flush the FIFO if the PWM was disabled and is about to be
|
||||
* enabled.
|
||||
*/
|
||||
if (cstate.enabled) {
|
||||
imx_pwm_wait_fifo_slot(chip, pwm);
|
||||
} else {
|
||||
ret = clk_prepare_enable(imx->clk_per);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
imx_pwm_sw_reset(chip);
|
||||
}
|
||||
|
||||
writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
|
||||
writel(period_cycles, imx->mmio_base + MX3_PWMPR);
|
||||
|
||||
writel(MX3_PWMCR_PRESCALER(prescale) |
|
||||
MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
|
||||
MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH |
|
||||
MX3_PWMCR_EN,
|
||||
imx->mmio_base + MX3_PWMCR);
|
||||
} else if (cstate.enabled) {
|
||||
writel(0, imx->mmio_base + MX3_PWMCR);
|
||||
|
||||
clk_disable_unprepare(imx->clk_per);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
||||
{
|
||||
struct imx_chip *imx = to_imx_chip(chip);
|
||||
|
@ -279,6 +345,7 @@ static const struct pwm_ops imx_pwm_ops_v1 = {
|
|||
};
|
||||
|
||||
static const struct pwm_ops imx_pwm_ops_v2 = {
|
||||
.apply = imx_pwm_apply_v2,
|
||||
.enable = imx_pwm_enable,
|
||||
.disable = imx_pwm_disable,
|
||||
.config = imx_pwm_config,
|
||||
|
|
Loading…
Reference in New Issue
Block a user