AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ethernet: Convert ETHER_ADDR_LEN uses to ETH_ALEN

Browse Source 
Reduce the number of #defines, use the normal #define from if_ether.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Joe Perches 2011-11-16 09:38:03 +00:00 committed by David S. Miller
parent 6a3c910ca0
commit 104bf3fb96
16 changed files with 22 additions and 28 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/ethernet/8390/8390.h
View File

@ -14,8 +14,6 @@
#define TX_PAGES 12 /* Two Tx slots */
#define ETHER_ADDR_LEN 6
/* The 8390 specific per-packet-header format. */
struct e8390_pkt_hdr {
unsigned char status; /* status */

2
drivers/net/ethernet/8390/apne.c
View File

@ -318,7 +318,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr)
i = request_irq(dev->irq, apne_interrupt, IRQF_SHARED, DRV_NAME, dev);
if (i) return i;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);

5
drivers/net/ethernet/8390/ax88796.c
View File

@ -735,15 +735,14 @@ static int ax_init_dev(struct net_device *dev)
if (ax->plat->flags & AXFLG_MAC_FROMDEV) {
ei_outb(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
ei_local->mem + E8390_CMD); /* 0x61 */
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] =
ei_inb(ioaddr + EN1_PHYS_SHIFT(i));
}
if ((ax->plat->flags & AXFLG_MAC_FROMPLATFORM) &&
ax->plat->mac_addr)
memcpy(dev->dev_addr, ax->plat->mac_addr,
ETHER_ADDR_LEN);
memcpy(dev->dev_addr, ax->plat->mac_addr, ETH_ALEN);
ax_reset_8390(dev);

2
drivers/net/ethernet/8390/es3210.c
View File

@ -195,7 +195,7 @@ static int __init es_probe1(struct net_device *dev, int ioaddr)
goto out;
}
for (i = 0; i < ETHER_ADDR_LEN ; i++)
for (i = 0; i < ETH_ALEN ; i++)
dev->dev_addr[i] = inb(ioaddr + ES_SA_PROM + i);
/* Check the Racal vendor ID as well. */

2
drivers/net/ethernet/8390/hp-plus.c
View File

@ -202,7 +202,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr)
/* Retrieve and checksum the station address. */
outw(MAC_Page, ioaddr + HP_PAGING);
for(i = 0; i < ETHER_ADDR_LEN; i++) {
for(i = 0; i < ETH_ALEN; i++) {
unsigned char inval = inb(ioaddr + 8 + i);
dev->dev_addr[i] = inval;
checksum += inval;

2
drivers/net/ethernet/8390/hp.c
View File

@ -156,7 +156,7 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
printk("%s: %s (ID %02x) at %#3x,", dev->name, name, board_id, ioaddr);
for(i = 0; i < ETHER_ADDR_LEN; i++)
for(i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + i);
printk(" %pM", dev->dev_addr);

2
drivers/net/ethernet/8390/hydra.c
View File

@ -129,7 +129,7 @@ static int __devinit hydra_init(struct zorro_dev *z)
if (!dev)
return -ENOMEM;
for(j = 0; j < ETHER_ADDR_LEN; j++)
for (j = 0; j < ETH_ALEN; j++)
dev->dev_addr[j] = *((u8 *)(board + HYDRA_ADDRPROM + 2*j));
/* We must set the 8390 for word mode. */

4
drivers/net/ethernet/8390/lne390.c
View File

@ -191,14 +191,14 @@ static int __init lne390_probe1(struct net_device *dev, int ioaddr)
|| inb(ioaddr + LNE390_SA_PROM + 1) != LNE390_ADDR1
|| inb(ioaddr + LNE390_SA_PROM + 2) != LNE390_ADDR2 ) {
printk("lne390.c: card not found");
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
printk(" %02x", inb(ioaddr + LNE390_SA_PROM + i));
printk(" (invalid prefix).\n");
return -ENODEV;
}
#endif
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + LNE390_SA_PROM + i);
printk("lne390.c: LNE390%X in EISA slot %d, address %pM.\n",
0xa+revision, ioaddr/0x1000, dev->dev_addr);

2
drivers/net/ethernet/8390/ne-h8300.c
View File

@ -312,7 +312,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
dev->base_addr = ioaddr;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);

4
drivers/net/ethernet/8390/ne.c
View File

@ -503,12 +503,12 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr)
#ifdef CONFIG_PLAT_MAPPI
outb_p(E8390_NODMA + E8390_PAGE1 + E8390_STOP,
ioaddr + E8390_CMD); /* 0x61 */
for (i = 0 ; i < ETHER_ADDR_LEN ; i++) {
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = SA_prom[i]
= inb_p(ioaddr + EN1_PHYS_SHIFT(i));
}
#else
for(i = 0; i < ETHER_ADDR_LEN; i++) {
for (i = 0; i < ETH_ALEN; i++) {
dev->dev_addr[i] = SA_prom[i];
}
#endif

2
drivers/net/ethernet/8390/ne2.c
View File

@ -460,7 +460,7 @@ static int __init ne2_probe1(struct net_device *dev, int slot)
dev->base_addr = base_addr;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
printk(" %pM\n", dev->dev_addr);

2
drivers/net/ethernet/8390/ne3210.c
View File

@ -125,7 +125,7 @@ static int __init ne3210_eisa_probe (struct device *device)
#endif
port_index = inb(ioaddr + NE3210_CFG2) >> 6;
for(i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
edev->slot, ifmap[port_index], dev->dev_addr);

2
drivers/net/ethernet/8390/stnic.c
View File

@ -114,7 +114,7 @@ static int __init stnic_probe(void)
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_get_node_addr (stnic_eadr);
#endif
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = stnic_eadr[i];
/* Set the base address to point to the NIC, not the "real" base! */

2
drivers/net/ethernet/8390/zorro8390.c
View File

@ -365,7 +365,7 @@ static int __devinit zorro8390_init(struct net_device *dev,
if (i)
return i;
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = SA_prom[i];
pr_debug("Found ethernet address: %pM\n", dev->dev_addr);

12
drivers/net/ethernet/amd/nmclan_cs.c
View File

@ -160,8 +160,6 @@ Include Files
Defines
---------------------------------------------------------------------------- */
#define ETHER_ADDR_LEN ETH_ALEN
/* 6 bytes in an Ethernet Address */
#define MACE_LADRF_LEN 8
/* 8 bytes in Logical Address Filter */
@ -600,7 +598,7 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr)
}
}
/* Set PADR register */
for (i = 0; i < ETHER_ADDR_LEN; i++)
for (i = 0; i < ETH_ALEN; i++)
mace_write(lp, ioaddr, MACE_PADR, enet_addr[i]);
/* MAC Configuration Control Register should be written last */
@ -639,11 +637,11 @@ static int nmclan_config(struct pcmcia_device *link)
/* Read the ethernet address from the CIS. */
len = pcmcia_get_tuple(link, 0x80, &buf);
if (!buf || len < ETHER_ADDR_LEN) {
if (!buf || len < ETH_ALEN) {
kfree(buf);
goto failed;
}
memcpy(dev->dev_addr, buf, ETHER_ADDR_LEN);
memcpy(dev->dev_addr, buf, ETH_ALEN);
kfree(buf);
/* Verify configuration by reading the MACE ID. */
@ -1421,7 +1419,7 @@ Output
static void set_multicast_list(struct net_device *dev)
{
mace_private *lp = netdev_priv(dev);
int adr[ETHER_ADDR_LEN] = {0}; /* Ethernet address */
int adr[ETH_ALEN] = {0}; /* Ethernet address */
struct netdev_hw_addr *ha;
#ifdef PCMCIA_DEBUG
@ -1443,7 +1441,7 @@ static void set_multicast_list(struct net_device *dev)
/* Calculate multicast logical address filter */
memset(lp->multicast_ladrf, 0, MACE_LADRF_LEN);
netdev_for_each_mc_addr(ha, dev) {
memcpy(adr, ha->addr, ETHER_ADDR_LEN);
memcpy(adr, ha->addr, ETH_ALEN);
BuildLAF(lp->multicast_ladrf, adr);
}
}

3
drivers/net/ethernet/broadcom/sb1250-mac.c
View File

@ -163,7 +163,6 @@ enum sbmac_state {
#define SBMAC_MAX_TXDESCR 256
#define SBMAC_MAX_RXDESCR 256
#define ETHER_ADDR_LEN 6
#define ENET_PACKET_SIZE 1518
/*#define ENET_PACKET_SIZE 9216 */
@ -266,7 +265,7 @@ struct sbmac_softc {
int sbm_pause; /* current pause setting */
int sbm_link; /* current link state */
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
unsigned char sbm_hwaddr[ETH_ALEN];
struct sbmacdma sbm_txdma; /* only channel 0 for now */
struct sbmacdma sbm_rxdma;