forked from luck/tmp_suning_uos_patched
ext4: simplify io_end handling for AIO DIO
When mapping blocks for direct IO, we allocate io_end structure before mapping blocks and store pointer to it in the inode. This creates a requirement that any AIO DIO using io_end must be protected by i_mutex. This created problems in the past with dioread_nolock mode which was corrupting io_end pointers. Also io_end is allocated unnecessarily in case where we don't need to convert any extents (which is a common case for example when overwriting file). We fix the problem by allocating io_end only once we return unwritten extent from block mapping function for AIO DIO (so we can save some pointless io_end allocations) and we pass pointer to it in bh->b_private which generic DIO code later passes to our end IO callback. That way we remove any need for global pointer to io_end structure and thus fix the races. The downside of this change is that the checking for unwritten IO in flight in ext4_extents_can_be_merged() is more racy since we now increment i_unwritten / set EXT4_STATE_DIO_UNWRITTEN only after dropping i_data_sem. However the check has been racy already before because ext4_writepages() already increment i_unwritten after dropping i_data_sem and reserved blocks save us from hitting ENOSPC in the worst case. Signed-off-by: Jan Kara <jack@suse.cz>
This commit is contained in:
parent
efe70c2951
commit
109811c20f
|
@ -1513,16 +1513,6 @@ static inline void ext4_set_io_unwritten_flag(struct inode *inode,
|
|||
}
|
||||
}
|
||||
|
||||
static inline ext4_io_end_t *ext4_inode_aio(struct inode *inode)
|
||||
{
|
||||
return inode->i_private;
|
||||
}
|
||||
|
||||
static inline void ext4_inode_aio_set(struct inode *inode, ext4_io_end_t *io)
|
||||
{
|
||||
inode->i_private = io;
|
||||
}
|
||||
|
||||
/*
|
||||
* Inode dynamic state flags
|
||||
*/
|
||||
|
|
|
@ -1736,6 +1736,12 @@ ext4_can_extents_be_merged(struct inode *inode, struct ext4_extent *ex1,
|
|||
*/
|
||||
if (ext1_ee_len + ext2_ee_len > EXT_INIT_MAX_LEN)
|
||||
return 0;
|
||||
/*
|
||||
* The check for IO to unwritten extent is somewhat racy as we
|
||||
* increment i_unwritten / set EXT4_STATE_DIO_UNWRITTEN only after
|
||||
* dropping i_data_sem. But reserved blocks should save us in that
|
||||
* case.
|
||||
*/
|
||||
if (ext4_ext_is_unwritten(ex1) &&
|
||||
(ext4_test_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN) ||
|
||||
atomic_read(&EXT4_I(inode)->i_unwritten) ||
|
||||
|
@ -4007,7 +4013,6 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
|
|||
struct ext4_ext_path *path = *ppath;
|
||||
int ret = 0;
|
||||
int err = 0;
|
||||
ext4_io_end_t *io = ext4_inode_aio(inode);
|
||||
|
||||
ext_debug("ext4_ext_handle_unwritten_extents: inode %lu, logical "
|
||||
"block %llu, max_blocks %u, flags %x, allocated %u\n",
|
||||
|
@ -4030,15 +4035,6 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
|
|||
flags | EXT4_GET_BLOCKS_CONVERT);
|
||||
if (ret <= 0)
|
||||
goto out;
|
||||
/*
|
||||
* Flag the inode(non aio case) or end_io struct (aio case)
|
||||
* that this IO needs to conversion to written when IO is
|
||||
* completed
|
||||
*/
|
||||
if (io)
|
||||
ext4_set_io_unwritten_flag(inode, io);
|
||||
else
|
||||
ext4_set_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
|
||||
map->m_flags |= EXT4_MAP_UNWRITTEN;
|
||||
goto out;
|
||||
}
|
||||
|
@ -4283,9 +4279,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
|
|||
unsigned int allocated = 0, offset = 0;
|
||||
unsigned int allocated_clusters = 0;
|
||||
struct ext4_allocation_request ar;
|
||||
ext4_io_end_t *io = ext4_inode_aio(inode);
|
||||
ext4_lblk_t cluster_offset;
|
||||
int set_unwritten = 0;
|
||||
bool map_from_cluster = false;
|
||||
|
||||
ext_debug("blocks %u/%u requested for inode %lu\n",
|
||||
|
@ -4482,15 +4476,6 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
|
|||
if (flags & EXT4_GET_BLOCKS_UNWRIT_EXT){
|
||||
ext4_ext_mark_unwritten(&newex);
|
||||
map->m_flags |= EXT4_MAP_UNWRITTEN;
|
||||
/*
|
||||
* io_end structure was created for every IO write to an
|
||||
* unwritten extent. To avoid unnecessary conversion,
|
||||
* here we flag the IO that really needs the conversion.
|
||||
* For non asycn direct IO case, flag the inode state
|
||||
* that we need to perform conversion when IO is done.
|
||||
*/
|
||||
if (flags & EXT4_GET_BLOCKS_PRE_IO)
|
||||
set_unwritten = 1;
|
||||
}
|
||||
|
||||
err = 0;
|
||||
|
@ -4501,14 +4486,6 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
|
|||
err = ext4_ext_insert_extent(handle, inode, &path,
|
||||
&newex, flags);
|
||||
|
||||
if (!err && set_unwritten) {
|
||||
if (io)
|
||||
ext4_set_io_unwritten_flag(inode, io);
|
||||
else
|
||||
ext4_set_inode_state(inode,
|
||||
EXT4_STATE_DIO_UNWRITTEN);
|
||||
}
|
||||
|
||||
if (err && free_on_err) {
|
||||
int fb_flags = flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE ?
|
||||
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE : 0;
|
||||
|
|
133
fs/ext4/inode.c
133
fs/ext4/inode.c
|
@ -797,18 +797,16 @@ int ext4_dio_get_block(struct inode *inode, sector_t iblock,
|
|||
}
|
||||
|
||||
/*
|
||||
* Get block function for DIO writes when we create unwritten extent if
|
||||
* Get block function for AIO DIO writes when we create unwritten extent if
|
||||
* blocks are not allocated yet. The extent will be converted to written
|
||||
* after IO is complete.
|
||||
*/
|
||||
static int ext4_dio_get_block_unwritten(struct inode *inode, sector_t iblock,
|
||||
struct buffer_head *bh_result, int create)
|
||||
static int ext4_dio_get_block_unwritten_async(struct inode *inode,
|
||||
sector_t iblock, struct buffer_head *bh_result, int create)
|
||||
{
|
||||
handle_t *handle;
|
||||
int ret;
|
||||
|
||||
ext4_debug("ext4_dio_get_block_unwritten: inode %lu, create flag %d\n",
|
||||
inode->i_ino, create);
|
||||
/* We don't expect handle for direct IO */
|
||||
WARN_ON_ONCE(ext4_journal_current_handle());
|
||||
|
||||
|
@ -818,16 +816,62 @@ static int ext4_dio_get_block_unwritten(struct inode *inode, sector_t iblock,
|
|||
ret = _ext4_get_block(inode, iblock, bh_result,
|
||||
EXT4_GET_BLOCKS_IO_CREATE_EXT);
|
||||
ext4_journal_stop(handle);
|
||||
if (!ret && buffer_unwritten(bh_result)) {
|
||||
ext4_io_end_t *io_end = ext4_inode_aio(inode);
|
||||
|
||||
/*
|
||||
* When doing DIO using unwritten extents, we need io_end to convert
|
||||
* unwritten extents to written on IO completion. We allocate io_end
|
||||
* once we spot unwritten extent and store it in b_private. Generic
|
||||
* DIO code keeps b_private set and furthermore passes the value to
|
||||
* our completion callback in 'private' argument.
|
||||
*/
|
||||
if (!ret && buffer_unwritten(bh_result)) {
|
||||
if (!bh_result->b_private) {
|
||||
ext4_io_end_t *io_end;
|
||||
|
||||
io_end = ext4_init_io_end(inode, GFP_KERNEL);
|
||||
if (!io_end)
|
||||
return -ENOMEM;
|
||||
bh_result->b_private = io_end;
|
||||
ext4_set_io_unwritten_flag(inode, io_end);
|
||||
}
|
||||
set_buffer_defer_completion(bh_result);
|
||||
WARN_ON_ONCE(io_end && !(io_end->flag & EXT4_IO_END_UNWRITTEN));
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* Get block function for non-AIO DIO writes when we create unwritten extent if
|
||||
* blocks are not allocated yet. The extent will be converted to written
|
||||
* after IO is complete from ext4_ext_direct_IO() function.
|
||||
*/
|
||||
static int ext4_dio_get_block_unwritten_sync(struct inode *inode,
|
||||
sector_t iblock, struct buffer_head *bh_result, int create)
|
||||
{
|
||||
handle_t *handle;
|
||||
int ret;
|
||||
|
||||
/* We don't expect handle for direct IO */
|
||||
WARN_ON_ONCE(ext4_journal_current_handle());
|
||||
|
||||
handle = start_dio_trans(inode, bh_result);
|
||||
if (IS_ERR(handle))
|
||||
return PTR_ERR(handle);
|
||||
ret = _ext4_get_block(inode, iblock, bh_result,
|
||||
EXT4_GET_BLOCKS_IO_CREATE_EXT);
|
||||
ext4_journal_stop(handle);
|
||||
|
||||
/*
|
||||
* Mark inode as having pending DIO writes to unwritten extents.
|
||||
* ext4_ext_direct_IO() checks this flag and converts extents to
|
||||
* written.
|
||||
*/
|
||||
if (!ret && buffer_unwritten(bh_result))
|
||||
ext4_set_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ext4_dio_get_block_overwrite(struct inode *inode, sector_t iblock,
|
||||
struct buffer_head *bh_result, int create)
|
||||
{
|
||||
|
@ -3243,7 +3287,7 @@ int ext4_dax_mmap_get_block(struct inode *inode, sector_t iblock,
|
|||
static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
|
||||
ssize_t size, void *private)
|
||||
{
|
||||
ext4_io_end_t *io_end = iocb->private;
|
||||
ext4_io_end_t *io_end = private;
|
||||
|
||||
/* if not async direct IO just return */
|
||||
if (!io_end)
|
||||
|
@ -3251,10 +3295,8 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
|
|||
|
||||
ext_debug("ext4_end_io_dio(): io_end 0x%p "
|
||||
"for inode %lu, iocb 0x%p, offset %llu, size %zd\n",
|
||||
iocb->private, io_end->inode->i_ino, iocb, offset,
|
||||
size);
|
||||
io_end, io_end->inode->i_ino, iocb, offset, size);
|
||||
|
||||
iocb->private = NULL;
|
||||
io_end->offset = offset;
|
||||
io_end->size = size;
|
||||
ext4_put_io_end(io_end);
|
||||
|
@ -3290,7 +3332,6 @@ static ssize_t ext4_ext_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
|
|||
get_block_t *get_block_func = NULL;
|
||||
int dio_flags = 0;
|
||||
loff_t final_size = offset + count;
|
||||
ext4_io_end_t *io_end = NULL;
|
||||
|
||||
/* Use the old path for reads and writes beyond i_size. */
|
||||
if (iov_iter_rw(iter) != WRITE || final_size > inode->i_size)
|
||||
|
@ -3315,16 +3356,17 @@ static ssize_t ext4_ext_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
|
|||
/*
|
||||
* We could direct write to holes and fallocate.
|
||||
*
|
||||
* Allocated blocks to fill the hole are marked as
|
||||
* unwritten to prevent parallel buffered read to expose
|
||||
* the stale data before DIO complete the data IO.
|
||||
* Allocated blocks to fill the hole are marked as unwritten to prevent
|
||||
* parallel buffered read to expose the stale data before DIO complete
|
||||
* the data IO.
|
||||
*
|
||||
* As to previously fallocated extents, ext4 get_block will
|
||||
* just simply mark the buffer mapped but still keep the
|
||||
* extents unwritten.
|
||||
* As to previously fallocated extents, ext4 get_block will just simply
|
||||
* mark the buffer mapped but still keep the extents unwritten.
|
||||
*
|
||||
* For non AIO case, we will convert those unwritten extents
|
||||
* to written after return back from blockdev_direct_IO.
|
||||
* For non AIO case, we will convert those unwritten extents to written
|
||||
* after return back from blockdev_direct_IO. That way we save us from
|
||||
* allocating io_end structure and also the overhead of offloading
|
||||
* the extent convertion to a workqueue.
|
||||
*
|
||||
* For async DIO, the conversion needs to be deferred when the
|
||||
* IO is completed. The ext4 end_io callback function will be
|
||||
|
@ -3332,30 +3374,13 @@ static ssize_t ext4_ext_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
|
|||
* case, we allocate an io_end structure to hook to the iocb.
|
||||
*/
|
||||
iocb->private = NULL;
|
||||
if (overwrite) {
|
||||
if (overwrite)
|
||||
get_block_func = ext4_dio_get_block_overwrite;
|
||||
else if (is_sync_kiocb(iocb)) {
|
||||
get_block_func = ext4_dio_get_block_unwritten_sync;
|
||||
dio_flags = DIO_LOCKING;
|
||||
} else {
|
||||
ext4_inode_aio_set(inode, NULL);
|
||||
if (!is_sync_kiocb(iocb)) {
|
||||
io_end = ext4_init_io_end(inode, GFP_NOFS);
|
||||
if (!io_end) {
|
||||
ret = -ENOMEM;
|
||||
goto retake_lock;
|
||||
}
|
||||
/*
|
||||
* Grab reference for DIO. Will be dropped in
|
||||
* ext4_end_io_dio()
|
||||
*/
|
||||
iocb->private = ext4_get_io_end(io_end);
|
||||
/*
|
||||
* we save the io structure for current async direct
|
||||
* IO, so that later ext4_map_blocks() could flag the
|
||||
* io structure whether there is a unwritten extents
|
||||
* needs to be converted when IO is completed.
|
||||
*/
|
||||
ext4_inode_aio_set(inode, io_end);
|
||||
}
|
||||
get_block_func = ext4_dio_get_block_unwritten;
|
||||
get_block_func = ext4_dio_get_block_unwritten_async;
|
||||
dio_flags = DIO_LOCKING;
|
||||
}
|
||||
#ifdef CONFIG_EXT4_FS_ENCRYPTION
|
||||
|
@ -3370,27 +3395,6 @@ static ssize_t ext4_ext_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
|
|||
get_block_func,
|
||||
ext4_end_io_dio, NULL, dio_flags);
|
||||
|
||||
/*
|
||||
* Put our reference to io_end. This can free the io_end structure e.g.
|
||||
* in sync IO case or in case of error. It can even perform extent
|
||||
* conversion if all bios we submitted finished before we got here.
|
||||
* Note that in that case iocb->private can be already set to NULL
|
||||
* here.
|
||||
*/
|
||||
if (io_end) {
|
||||
ext4_inode_aio_set(inode, NULL);
|
||||
ext4_put_io_end(io_end);
|
||||
/*
|
||||
* When no IO was submitted ext4_end_io_dio() was not
|
||||
* called so we have to put iocb's reference.
|
||||
*/
|
||||
if (ret <= 0 && ret != -EIOCBQUEUED && iocb->private) {
|
||||
WARN_ON(iocb->private != io_end);
|
||||
WARN_ON(io_end->flag & EXT4_IO_END_UNWRITTEN);
|
||||
ext4_put_io_end(io_end);
|
||||
iocb->private = NULL;
|
||||
}
|
||||
}
|
||||
if (ret > 0 && !overwrite && ext4_test_inode_state(inode,
|
||||
EXT4_STATE_DIO_UNWRITTEN)) {
|
||||
int err;
|
||||
|
@ -3405,7 +3409,6 @@ static ssize_t ext4_ext_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
|
|||
ext4_clear_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN);
|
||||
}
|
||||
|
||||
retake_lock:
|
||||
if (iov_iter_rw(iter) == WRITE)
|
||||
inode_dio_end(inode);
|
||||
/* take i_mutex locking again if we do a ovewrite dio */
|
||||
|
|
Loading…
Reference in New Issue
Block a user