forked from luck/tmp_suning_uos_patched
rtc: remove bfin driver
The blackfin architecture is getting removed, so this one is now obsolete. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Aaron Wu <aaron.wu@analog.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
parent
fca94ec613
commit
111f750389
|
|
@ -1434,16 +1434,6 @@ config RTC_DRV_AU1XXX
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-au1xxx.
|
||||
|
||||
config RTC_DRV_BFIN
|
||||
tristate "Blackfin On-Chip RTC"
|
||||
depends on BLACKFIN && !BF561
|
||||
help
|
||||
If you say yes here you will get support for the
|
||||
Blackfin On-Chip Real Time Clock.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-bfin.
|
||||
|
||||
config RTC_DRV_RS5C313
|
||||
tristate "Ricoh RS5C313"
|
||||
depends on SH_LANDISK
|
||||
|
|
|
|||
|
|
@ -36,7 +36,6 @@ obj-$(CONFIG_RTC_DRV_ASM9260) += rtc-asm9260.o
|
|||
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
|
||||
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
|
||||
obj-$(CONFIG_RTC_DRV_AU1XXX) += rtc-au1xxx.o
|
||||
obj-$(CONFIG_RTC_DRV_BFIN) += rtc-bfin.o
|
||||
obj-$(CONFIG_RTC_DRV_BRCMSTB) += rtc-brcmstb-waketimer.o
|
||||
obj-$(CONFIG_RTC_DRV_BQ32K) += rtc-bq32k.o
|
||||
obj-$(CONFIG_RTC_DRV_BQ4802) += rtc-bq4802.o
|
||||
|
|
|
|||
|
|
@ -1,448 +0,0 @@
|
|||
/*
|
||||
* Blackfin On-Chip Real Time Clock Driver
|
||||
* Supports BF51x/BF52x/BF53[123]/BF53[467]/BF54x
|
||||
*
|
||||
* Copyright 2004-2010 Analog Devices Inc.
|
||||
*
|
||||
* Enter bugs at http://blackfin.uclinux.org/
|
||||
*
|
||||
* Licensed under the GPL-2 or later.
|
||||
*/
|
||||
|
||||
/* The biggest issue we deal with in this driver is that register writes are
|
||||
* synced to the RTC frequency of 1Hz. So if you write to a register and
|
||||
* attempt to write again before the first write has completed, the new write
|
||||
* is simply discarded. This can easily be troublesome if userspace disables
|
||||
* one event (say periodic) and then right after enables an event (say alarm).
|
||||
* Since all events are maintained in the same interrupt mask register, if
|
||||
* we wrote to it to disable the first event and then wrote to it again to
|
||||
* enable the second event, that second event would not be enabled as the
|
||||
* write would be discarded and things quickly fall apart.
|
||||
*
|
||||
* To keep this delay from significantly degrading performance (we, in theory,
|
||||
* would have to sleep for up to 1 second every time we wanted to write a
|
||||
* register), we only check the write pending status before we start to issue
|
||||
* a new write. We bank on the idea that it doesn't matter when the sync
|
||||
* happens so long as we don't attempt another write before it does. The only
|
||||
* time userspace would take this penalty is when they try and do multiple
|
||||
* operations right after another ... but in this case, they need to take the
|
||||
* sync penalty, so we should be OK.
|
||||
*
|
||||
* Also note that the RTC_ISTAT register does not suffer this penalty; its
|
||||
* writes to clear status registers complete immediately.
|
||||
*/
|
||||
|
||||
/* It may seem odd that there is no SWCNT code in here (which would be exposed
|
||||
* via the periodic interrupt event, or PIE). Since the Blackfin RTC peripheral
|
||||
* runs in units of seconds (N/HZ) but the Linux framework runs in units of HZ
|
||||
* (2^N HZ), there is no point in keeping code that only provides 1 HZ PIEs.
|
||||
* The same exact behavior can be accomplished by using the update interrupt
|
||||
* event (UIE). Maybe down the line the RTC peripheral will suck less in which
|
||||
* case we can re-introduce PIE support.
|
||||
*/
|
||||
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/seq_file.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <asm/blackfin.h>
|
||||
|
||||
#define dev_dbg_stamp(dev) dev_dbg(dev, "%s:%i: here i am\n", __func__, __LINE__)
|
||||
|
||||
struct bfin_rtc {
|
||||
struct rtc_device *rtc_dev;
|
||||
struct rtc_time rtc_alarm;
|
||||
u16 rtc_wrote_regs;
|
||||
};
|
||||
|
||||
/* Bit values for the ISTAT / ICTL registers */
|
||||
#define RTC_ISTAT_WRITE_COMPLETE 0x8000
|
||||
#define RTC_ISTAT_WRITE_PENDING 0x4000
|
||||
#define RTC_ISTAT_ALARM_DAY 0x0040
|
||||
#define RTC_ISTAT_24HR 0x0020
|
||||
#define RTC_ISTAT_HOUR 0x0010
|
||||
#define RTC_ISTAT_MIN 0x0008
|
||||
#define RTC_ISTAT_SEC 0x0004
|
||||
#define RTC_ISTAT_ALARM 0x0002
|
||||
#define RTC_ISTAT_STOPWATCH 0x0001
|
||||
|
||||
/* Shift values for RTC_STAT register */
|
||||
#define DAY_BITS_OFF 17
|
||||
#define HOUR_BITS_OFF 12
|
||||
#define MIN_BITS_OFF 6
|
||||
#define SEC_BITS_OFF 0
|
||||
|
||||
/* Some helper functions to convert between the common RTC notion of time
|
||||
* and the internal Blackfin notion that is encoded in 32bits.
|
||||
*/
|
||||
static inline u32 rtc_time_to_bfin(unsigned long now)
|
||||
{
|
||||
u32 sec = (now % 60);
|
||||
u32 min = (now % (60 * 60)) / 60;
|
||||
u32 hour = (now % (60 * 60 * 24)) / (60 * 60);
|
||||
u32 days = (now / (60 * 60 * 24));
|
||||
return (sec << SEC_BITS_OFF) +
|
||||
(min << MIN_BITS_OFF) +
|
||||
(hour << HOUR_BITS_OFF) +
|
||||
(days << DAY_BITS_OFF);
|
||||
}
|
||||
static inline unsigned long rtc_bfin_to_time(u32 rtc_bfin)
|
||||
{
|
||||
return (((rtc_bfin >> SEC_BITS_OFF) & 0x003F)) +
|
||||
(((rtc_bfin >> MIN_BITS_OFF) & 0x003F) * 60) +
|
||||
(((rtc_bfin >> HOUR_BITS_OFF) & 0x001F) * 60 * 60) +
|
||||
(((rtc_bfin >> DAY_BITS_OFF) & 0x7FFF) * 60 * 60 * 24);
|
||||
}
|
||||
static inline void rtc_bfin_to_tm(u32 rtc_bfin, struct rtc_time *tm)
|
||||
{
|
||||
rtc_time_to_tm(rtc_bfin_to_time(rtc_bfin), tm);
|
||||
}
|
||||
|
||||
/**
|
||||
* bfin_rtc_sync_pending - make sure pending writes have complete
|
||||
*
|
||||
* Wait for the previous write to a RTC register to complete.
|
||||
* Unfortunately, we can't sleep here as that introduces a race condition when
|
||||
* turning on interrupt events. Consider this:
|
||||
* - process sets alarm
|
||||
* - process enables alarm
|
||||
* - process sleeps while waiting for rtc write to sync
|
||||
* - interrupt fires while process is sleeping
|
||||
* - interrupt acks the event by writing to ISTAT
|
||||
* - interrupt sets the WRITE PENDING bit
|
||||
* - interrupt handler finishes
|
||||
* - process wakes up, sees WRITE PENDING bit set, goes to sleep
|
||||
* - interrupt fires while process is sleeping
|
||||
* If anyone can point out the obvious solution here, i'm listening :). This
|
||||
* shouldn't be an issue on an SMP or preempt system as this function should
|
||||
* only be called with the rtc lock held.
|
||||
*
|
||||
* Other options:
|
||||
* - disable PREN so the sync happens at 32.768kHZ ... but this changes the
|
||||
* inc rate for all RTC registers from 1HZ to 32.768kHZ ...
|
||||
* - use the write complete IRQ
|
||||
*/
|
||||
/*
|
||||
static void bfin_rtc_sync_pending_polled(void)
|
||||
{
|
||||
while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_COMPLETE))
|
||||
if (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING))
|
||||
break;
|
||||
bfin_write_RTC_ISTAT(RTC_ISTAT_WRITE_COMPLETE);
|
||||
}
|
||||
*/
|
||||
static DECLARE_COMPLETION(bfin_write_complete);
|
||||
static void bfin_rtc_sync_pending(struct device *dev)
|
||||
{
|
||||
dev_dbg_stamp(dev);
|
||||
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
|
||||
wait_for_completion_timeout(&bfin_write_complete, HZ * 5);
|
||||
dev_dbg_stamp(dev);
|
||||
}
|
||||
|
||||
/**
|
||||
* bfin_rtc_reset - set RTC to sane/known state
|
||||
*
|
||||
* Initialize the RTC. Enable pre-scaler to scale RTC clock
|
||||
* to 1Hz and clear interrupt/status registers.
|
||||
*/
|
||||
static void bfin_rtc_reset(struct device *dev, u16 rtc_ictl)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
dev_dbg_stamp(dev);
|
||||
bfin_rtc_sync_pending(dev);
|
||||
bfin_write_RTC_PREN(0x1);
|
||||
bfin_write_RTC_ICTL(rtc_ictl);
|
||||
bfin_write_RTC_ALARM(0);
|
||||
bfin_write_RTC_ISTAT(0xFFFF);
|
||||
rtc->rtc_wrote_regs = 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* bfin_rtc_interrupt - handle interrupt from RTC
|
||||
*
|
||||
* Since we handle all RTC events here, we have to make sure the requested
|
||||
* interrupt is enabled (in RTC_ICTL) as the event status register (RTC_ISTAT)
|
||||
* always gets updated regardless of the interrupt being enabled. So when one
|
||||
* even we care about (e.g. stopwatch) goes off, we don't want to turn around
|
||||
* and say that other events have happened as well (e.g. second). We do not
|
||||
* have to worry about pending writes to the RTC_ICTL register as interrupts
|
||||
* only fire if they are enabled in the RTC_ICTL register.
|
||||
*/
|
||||
static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
|
||||
{
|
||||
struct device *dev = dev_id;
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
unsigned long events = 0;
|
||||
bool write_complete = false;
|
||||
u16 rtc_istat, rtc_istat_clear, rtc_ictl, bits;
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
rtc_istat = bfin_read_RTC_ISTAT();
|
||||
rtc_ictl = bfin_read_RTC_ICTL();
|
||||
rtc_istat_clear = 0;
|
||||
|
||||
bits = RTC_ISTAT_WRITE_COMPLETE;
|
||||
if (rtc_istat & bits) {
|
||||
rtc_istat_clear |= bits;
|
||||
write_complete = true;
|
||||
complete(&bfin_write_complete);
|
||||
}
|
||||
|
||||
bits = (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY);
|
||||
if (rtc_ictl & bits) {
|
||||
if (rtc_istat & bits) {
|
||||
rtc_istat_clear |= bits;
|
||||
events |= RTC_AF | RTC_IRQF;
|
||||
}
|
||||
}
|
||||
|
||||
bits = RTC_ISTAT_SEC;
|
||||
if (rtc_ictl & bits) {
|
||||
if (rtc_istat & bits) {
|
||||
rtc_istat_clear |= bits;
|
||||
events |= RTC_UF | RTC_IRQF;
|
||||
}
|
||||
}
|
||||
|
||||
if (events)
|
||||
rtc_update_irq(rtc->rtc_dev, 1, events);
|
||||
|
||||
if (write_complete || events) {
|
||||
bfin_write_RTC_ISTAT(rtc_istat_clear);
|
||||
return IRQ_HANDLED;
|
||||
} else
|
||||
return IRQ_NONE;
|
||||
}
|
||||
|
||||
static void bfin_rtc_int_set(u16 rtc_int)
|
||||
{
|
||||
bfin_write_RTC_ISTAT(rtc_int);
|
||||
bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() | rtc_int);
|
||||
}
|
||||
static void bfin_rtc_int_clear(u16 rtc_int)
|
||||
{
|
||||
bfin_write_RTC_ICTL(bfin_read_RTC_ICTL() & rtc_int);
|
||||
}
|
||||
static void bfin_rtc_int_set_alarm(struct bfin_rtc *rtc)
|
||||
{
|
||||
/* Blackfin has different bits for whether the alarm is
|
||||
* more than 24 hours away.
|
||||
*/
|
||||
bfin_rtc_int_set(rtc->rtc_alarm.tm_yday == -1 ? RTC_ISTAT_ALARM : RTC_ISTAT_ALARM_DAY);
|
||||
}
|
||||
|
||||
static int bfin_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
if (enabled)
|
||||
bfin_rtc_int_set_alarm(rtc);
|
||||
else
|
||||
bfin_rtc_int_clear(~(RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
if (rtc->rtc_wrote_regs & 0x1)
|
||||
bfin_rtc_sync_pending(dev);
|
||||
|
||||
rtc_bfin_to_tm(bfin_read_RTC_STAT(), tm);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
unsigned long now;
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
ret = rtc_tm_to_time(tm, &now);
|
||||
if (ret == 0) {
|
||||
if (rtc->rtc_wrote_regs & 0x1)
|
||||
bfin_rtc_sync_pending(dev);
|
||||
bfin_write_RTC_STAT(rtc_time_to_bfin(now));
|
||||
rtc->rtc_wrote_regs = 0x1;
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int bfin_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
dev_dbg_stamp(dev);
|
||||
alrm->time = rtc->rtc_alarm;
|
||||
bfin_rtc_sync_pending(dev);
|
||||
alrm->enabled = !!(bfin_read_RTC_ICTL() & (RTC_ISTAT_ALARM | RTC_ISTAT_ALARM_DAY));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct bfin_rtc *rtc = dev_get_drvdata(dev);
|
||||
unsigned long rtc_alarm;
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
if (rtc_tm_to_time(&alrm->time, &rtc_alarm))
|
||||
return -EINVAL;
|
||||
|
||||
rtc->rtc_alarm = alrm->time;
|
||||
|
||||
bfin_rtc_sync_pending(dev);
|
||||
bfin_write_RTC_ALARM(rtc_time_to_bfin(rtc_alarm));
|
||||
if (alrm->enabled)
|
||||
bfin_rtc_int_set_alarm(rtc);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
|
||||
{
|
||||
#define yesno(x) ((x) ? "yes" : "no")
|
||||
u16 ictl = bfin_read_RTC_ICTL();
|
||||
dev_dbg_stamp(dev);
|
||||
seq_printf(seq,
|
||||
"alarm_IRQ\t: %s\n"
|
||||
"wkalarm_IRQ\t: %s\n"
|
||||
"seconds_IRQ\t: %s\n",
|
||||
yesno(ictl & RTC_ISTAT_ALARM),
|
||||
yesno(ictl & RTC_ISTAT_ALARM_DAY),
|
||||
yesno(ictl & RTC_ISTAT_SEC));
|
||||
return 0;
|
||||
#undef yesno
|
||||
}
|
||||
|
||||
static const struct rtc_class_ops bfin_rtc_ops = {
|
||||
.read_time = bfin_rtc_read_time,
|
||||
.set_time = bfin_rtc_set_time,
|
||||
.read_alarm = bfin_rtc_read_alarm,
|
||||
.set_alarm = bfin_rtc_set_alarm,
|
||||
.proc = bfin_rtc_proc,
|
||||
.alarm_irq_enable = bfin_rtc_alarm_irq_enable,
|
||||
};
|
||||
|
||||
static int bfin_rtc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct bfin_rtc *rtc;
|
||||
struct device *dev = &pdev->dev;
|
||||
int ret;
|
||||
unsigned long timeout = jiffies + HZ;
|
||||
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
/* Allocate memory for our RTC struct */
|
||||
rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
|
||||
if (unlikely(!rtc))
|
||||
return -ENOMEM;
|
||||
platform_set_drvdata(pdev, rtc);
|
||||
device_init_wakeup(dev, 1);
|
||||
|
||||
/* Register our RTC with the RTC framework */
|
||||
rtc->rtc_dev = devm_rtc_device_register(dev, pdev->name, &bfin_rtc_ops,
|
||||
THIS_MODULE);
|
||||
if (IS_ERR(rtc->rtc_dev))
|
||||
return PTR_ERR(rtc->rtc_dev);
|
||||
|
||||
/* Grab the IRQ and init the hardware */
|
||||
ret = devm_request_irq(dev, IRQ_RTC, bfin_rtc_interrupt, 0,
|
||||
pdev->name, dev);
|
||||
if (unlikely(ret))
|
||||
dev_err(&pdev->dev,
|
||||
"unable to request IRQ; alarm won't work, "
|
||||
"and writes will be delayed\n");
|
||||
|
||||
/* sometimes the bootloader touched things, but the write complete was not
|
||||
* enabled, so let's just do a quick timeout here since the IRQ will not fire ...
|
||||
*/
|
||||
while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
|
||||
if (time_after(jiffies, timeout))
|
||||
break;
|
||||
bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
|
||||
bfin_write_RTC_SWCNT(0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
|
||||
bfin_rtc_reset(dev, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int bfin_rtc_suspend(struct device *dev)
|
||||
{
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
if (device_may_wakeup(dev)) {
|
||||
enable_irq_wake(IRQ_RTC);
|
||||
bfin_rtc_sync_pending(dev);
|
||||
} else
|
||||
bfin_rtc_int_clear(0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bfin_rtc_resume(struct device *dev)
|
||||
{
|
||||
dev_dbg_stamp(dev);
|
||||
|
||||
if (device_may_wakeup(dev))
|
||||
disable_irq_wake(IRQ_RTC);
|
||||
|
||||
/*
|
||||
* Since only some of the RTC bits are maintained externally in the
|
||||
* Vbat domain, we need to wait for the RTC MMRs to be synced into
|
||||
* the core after waking up. This happens every RTC 1HZ. Once that
|
||||
* has happened, we can go ahead and re-enable the important write
|
||||
* complete interrupt event.
|
||||
*/
|
||||
while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_SEC))
|
||||
continue;
|
||||
bfin_rtc_int_set(RTC_ISTAT_WRITE_COMPLETE);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(bfin_rtc_pm_ops, bfin_rtc_suspend, bfin_rtc_resume);
|
||||
|
||||
static struct platform_driver bfin_rtc_driver = {
|
||||
.driver = {
|
||||
.name = "rtc-bfin",
|
||||
.pm = &bfin_rtc_pm_ops,
|
||||
},
|
||||
.probe = bfin_rtc_probe,
|
||||
.remove = bfin_rtc_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(bfin_rtc_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
|
||||
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:rtc-bfin");
|
||||
Loading…
Reference in New Issue
Block a user