AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

mtd: add GPMI-NAND driver in the config and Makefile

Browse Source 
add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Koen Beel <koen.beel@barco.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
This commit is contained in:
Huang Shijie 2011-09-08 10:47:11 +08:00 committed by Artem Bityutskiy
parent 45dfc1a09a
commit 157550ff77
3 changed files with 17 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/mtd/nand/Kconfig
View File

@ -417,6 +417,19 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
select MTD_PARTITIONS
select MTD_CMDLINE_PARTS
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
module, it can do the hardware ECC. The GPMI supports several
NAND flashs at the same time. The GPMI may conflicts with other
block, such as SD card. So pay attention to it when you enable
the GPMI.
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help

1
drivers/mtd/nand/Makefile
View File

@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o

3
drivers/mtd/nand/gpmi-nand/Makefile Normal file
View File

@ -0,0 +1,3 @@
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
gpmi_nand-objs += gpmi-nand.o
gpmi_nand-objs += gpmi-lib.o