Merge branches 'clk-fallthru', 'clk-ingenic', 'clk-tegra', 'clk-sirf' and 'clk-qoriq' into clk-next

- Add RTC related clks on Ingenic SoCs
 - Support USB PHY clks on Ingenic SoCs

* clk-fallthru:
  clk: davinci: Use fallthrough pseudo-keyword
  clk: imx: Use fallthrough pseudo-keyword

* clk-ingenic:
  clk: X1000: Add support for calculat REFCLK of USB PHY.
  clk: JZ4780: Reformat the code to align it.
  clk: JZ4780: Add functions for enable and disable USB PHY.
  clk: Ingenic: Add RTC related clocks for Ingenic SoCs.
  dt-bindings: clock: Add tabs to align code.
  dt-bindings: clock: Add RTC related clocks for Ingenic SoCs.

* clk-tegra:
  clk: tegra: pll: Improve PLLM enable-state detection

* clk-sirf:
  clk: clk-atlas6: fix return value check in atlas6_clk_init()

* clk-qoriq:
  clk: qoriq: add LS1021A core pll mux options

drivers/clk/clk-qoriq.c

@@ -244,6 +244,14 @@ static const struct clockgen_muxinfo clockgen2_cmux_cgb = {
 	},
 };
 
+static const struct clockgen_muxinfo ls1021a_cmux = {
+	{
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV1 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV2 },
+		{ CLKSEL_VALID, CGA_PLL1, PLL_DIV4 },
+	}
+};
+
 static const struct clockgen_muxinfo ls1028a_hwa1 = {
 	{
 		{ CLKSEL_VALID, PLATFORM_PLL, PLL_DIV1 },
@@ -577,7 +585,7 @@ static const struct clockgen_chipinfo chipinfo[] = {
 	{
 		.compat = "fsl,ls1021a-clockgen",
 		.cmux_groups = {
-			&t1023_cmux
+			&ls1021a_cmux
 		},
 		.cmux_to_group = {
 			0, -1

drivers/clk/davinci/pll.c

@@ -651,7 +651,7 @@ static int davinci_pll_sysclk_rate_change(struct notifier_block *nb,
 		pllcmd = readl(pll->base + PLLCMD);
 		pllcmd |= PLLCMD_GOSET;
 		writel(pllcmd, pll->base + PLLCMD);
-		/* fallthrough */
+		fallthrough;
 	case PRE_RATE_CHANGE:
 		/* Wait until for outstanding changes to take effect */
 		do {

drivers/clk/imx/clk-pllv3.c

@@ -433,7 +433,7 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
 		break;
 	case IMX_PLLV3_USB_VF610:
 		pll->div_shift = 1;
-		/* fall through */
+		fallthrough;
 	case IMX_PLLV3_USB:
 		ops = &clk_pllv3_ops;
 		pll->powerup_set = true;
@@ -441,7 +441,7 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name,
 	case IMX_PLLV3_AV_IMX7:
 		pll->num_offset = PLL_IMX7_NUM_OFFSET;
 		pll->denom_offset = PLL_IMX7_DENOM_OFFSET;
-		/* fall through */
+		fallthrough;
 	case IMX_PLLV3_AV:
 		ops = &clk_pllv3_av_ops;
 		break;

drivers/clk/ingenic/jz4780-cgu.c

@@ -4,6 +4,7 @@
  *
  * Copyright (c) 2013-2015 Imagination Technologies
  * Author: Paul Burton <paul.burton@mips.com>
+ * Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
  */
 
 #include <linux/clk-provider.h>
@@ -59,6 +60,7 @@
 #define USBPCR_VBUSVLDEXT		BIT(24)
 #define USBPCR_VBUSVLDEXTSEL	BIT(23)
 #define USBPCR_POR				BIT(22)
+#define USBPCR_SIDDQ			BIT(21)
 #define USBPCR_OTG_DISABLE		BIT(20)
 #define USBPCR_COMPDISTUNE_MASK	(0x7 << 17)
 #define USBPCR_OTGTUNE_MASK		(0x7 << 14)
@@ -100,32 +102,6 @@
 
 static struct ingenic_cgu *cgu;
 
-static u8 jz4780_otg_phy_get_parent(struct clk_hw *hw)
-{
-	/* we only use CLKCORE, revisit if that ever changes */
-	return 0;
-}
-
-static int jz4780_otg_phy_set_parent(struct clk_hw *hw, u8 idx)
-{
-	unsigned long flags;
-	u32 usbpcr1;
-
-	if (idx > 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&cgu->lock, flags);
-
-	usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
-	usbpcr1 &= ~USBPCR1_REFCLKSEL_MASK;
-	/* we only use CLKCORE */
-	usbpcr1 |= USBPCR1_REFCLKSEL_CORE;
-	writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
-
-	spin_unlock_irqrestore(&cgu->lock, flags);
-	return 0;
-}
-
 static unsigned long jz4780_otg_phy_recalc_rate(struct clk_hw *hw,
 						unsigned long parent_rate)
 {
@@ -149,7 +125,6 @@ static unsigned long jz4780_otg_phy_recalc_rate(struct clk_hw *hw,
 		return 19200000;
 	}
 
-	BUG();
 	return parent_rate;
 }
 
@@ -206,13 +181,43 @@ static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
-static const struct clk_ops jz4780_otg_phy_ops = {
-	.get_parent = jz4780_otg_phy_get_parent,
-	.set_parent = jz4780_otg_phy_set_parent,
+static int jz4780_otg_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
 
+	writel(readl(reg_opcr) | OPCR_SPENDN0, reg_opcr);
+	writel(readl(reg_usbpcr) & ~USBPCR_OTG_DISABLE & ~USBPCR_SIDDQ, reg_usbpcr);
+	return 0;
+}
+
+static void jz4780_otg_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDN0, reg_opcr);
+	writel(readl(reg_usbpcr) | USBPCR_OTG_DISABLE | USBPCR_SIDDQ, reg_usbpcr);
+}
+
+static int jz4780_otg_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr	= cgu->base + CGU_REG_USBPCR;
+
+	return (readl(reg_opcr) & OPCR_SPENDN0) &&
+		!(readl(reg_usbpcr) & USBPCR_SIDDQ) &&
+		!(readl(reg_usbpcr) & USBPCR_OTG_DISABLE);
+}
+
+static const struct clk_ops jz4780_otg_phy_ops = {
 	.recalc_rate = jz4780_otg_phy_recalc_rate,
 	.round_rate = jz4780_otg_phy_round_rate,
 	.set_rate = jz4780_otg_phy_set_rate,
+
+	.enable		= jz4780_otg_phy_enable,
+	.disable	= jz4780_otg_phy_disable,
+	.is_enabled	= jz4780_otg_phy_is_enabled,
 };
 
 static int jz4780_core1_enable(struct clk_hw *hw)
@@ -516,6 +521,18 @@ static const struct ingenic_cgu_clk_info jz4780_cgu_clocks[] = {
 		.gate = { CGU_REG_CLKGR0, 1 },
 	},
 
+	[JZ4780_CLK_EXCLK_DIV512] = {
+		"exclk_div512", CGU_CLK_FIXDIV,
+		.parents = { JZ4780_CLK_EXCLK },
+		.fixdiv = { 512 },
+	},
+
+	[JZ4780_CLK_RTC] = {
+		"rtc_ercs", CGU_CLK_MUX | CGU_CLK_GATE,
+		.parents = { JZ4780_CLK_EXCLK_DIV512, JZ4780_CLK_RTCLK },
+		.mux = { CGU_REG_OPCR, 2, 1},
+	},
+
 	/* Gate-only clocks */
 
 	[JZ4780_CLK_NEMC] = {

drivers/clk/ingenic/x1000-cgu.c

@@ -48,8 +48,87 @@
 #define USBPCR_SIDDQ		BIT(21)
 #define USBPCR_OTG_DISABLE	BIT(20)
 
+/* bits within the USBPCR1 register */
+#define USBPCR1_REFCLKSEL_SHIFT	26
+#define USBPCR1_REFCLKSEL_MASK	(0x3 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKSEL_CORE	(0x2 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKDIV_SHIFT	24
+#define USBPCR1_REFCLKDIV_MASK	(0x3 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_48	(0x2 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_24	(0x1 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_12	(0x0 << USBPCR1_REFCLKDIV_SHIFT)
+
 static struct ingenic_cgu *cgu;
 
+static unsigned long x1000_otg_phy_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	u32 usbpcr1;
+	unsigned refclk_div;
+
+	usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+	refclk_div = usbpcr1 & USBPCR1_REFCLKDIV_MASK;
+
+	switch (refclk_div) {
+	case USBPCR1_REFCLKDIV_12:
+		return 12000000;
+
+	case USBPCR1_REFCLKDIV_24:
+		return 24000000;
+
+	case USBPCR1_REFCLKDIV_48:
+		return 48000000;
+	}
+
+	return parent_rate;
+}
+
+static long x1000_otg_phy_round_rate(struct clk_hw *hw, unsigned long req_rate,
+				      unsigned long *parent_rate)
+{
+	if (req_rate < 18000000)
+		return 12000000;
+
+	if (req_rate < 36000000)
+		return 24000000;
+
+	return 48000000;
+}
+
+static int x1000_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
+				   unsigned long parent_rate)
+{
+	unsigned long flags;
+	u32 usbpcr1, div_bits;
+
+	switch (req_rate) {
+	case 12000000:
+		div_bits = USBPCR1_REFCLKDIV_12;
+		break;
+
+	case 24000000:
+		div_bits = USBPCR1_REFCLKDIV_24;
+		break;
+
+	case 48000000:
+		div_bits = USBPCR1_REFCLKDIV_48;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&cgu->lock, flags);
+
+	usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+	usbpcr1 &= ~USBPCR1_REFCLKDIV_MASK;
+	usbpcr1 |= div_bits;
+	writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
+
+	spin_unlock_irqrestore(&cgu->lock, flags);
+	return 0;
+}
+
 static int x1000_usb_phy_enable(struct clk_hw *hw)
 {
 	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
@@ -80,6 +159,10 @@ static int x1000_usb_phy_is_enabled(struct clk_hw *hw)
 }
 
 static const struct clk_ops x1000_otg_phy_ops = {
+	.recalc_rate = x1000_otg_phy_recalc_rate,
+	.round_rate = x1000_otg_phy_round_rate,
+	.set_rate = x1000_otg_phy_set_rate,
+
 	.enable		= x1000_usb_phy_enable,
 	.disable	= x1000_usb_phy_disable,
 	.is_enabled	= x1000_usb_phy_is_enabled,
@@ -144,7 +227,6 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		},
 	},
 
-
 	/* Custom (SoC-specific) OTG PHY */
 
 	[X1000_CLK_OTGPHY] = {
@@ -278,6 +360,19 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
 		.mux = { CGU_REG_SSICDR, 30, 1 },
 	},
 
+	[X1000_CLK_EXCLK_DIV512] = {
+		"exclk_div512", CGU_CLK_FIXDIV,
+		.parents = { X1000_CLK_EXCLK },
+		.fixdiv = { 512 },
+	},
+
+	[X1000_CLK_RTC] = {
+		"rtc_ercs", CGU_CLK_MUX | CGU_CLK_GATE,
+		.parents = { X1000_CLK_EXCLK_DIV512, X1000_CLK_RTCLK },
+		.mux = { CGU_REG_OPCR, 2, 1},
+		.gate = { CGU_REG_CLKGR, 27 },
+	},
+
 	/* Gate-only clocks */
 
 	[X1000_CLK_EMC] = {

drivers/clk/ingenic/x1830-cgu.c

@@ -329,6 +329,19 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
 		.mux = { CGU_REG_SSICDR, 29, 1 },
 	},
 
+	[X1830_CLK_EXCLK_DIV512] = {
+		"exclk_div512", CGU_CLK_FIXDIV,
+		.parents = { X1830_CLK_EXCLK },
+		.fixdiv = { 512 },
+	},
+
+	[X1830_CLK_RTC] = {
+		"rtc_ercs", CGU_CLK_MUX | CGU_CLK_GATE,
+		.parents = { X1830_CLK_EXCLK_DIV512, X1830_CLK_RTCLK },
+		.mux = { CGU_REG_OPCR, 2, 1},
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+
 	/* Gate-only clocks */
 
 	[X1830_CLK_EMC] = {

drivers/clk/sirf/clk-atlas6.c

@@ -135,7 +135,7 @@ static void __init atlas6_clk_init(struct device_node *np)
 
 	for (i = pll1; i < maxclk; i++) {
 		atlas6_clks[i] = clk_register(NULL, atlas6_clk_hw_array[i]);
-		BUG_ON(!atlas6_clks[i]);
+		BUG_ON(IS_ERR(atlas6_clks[i]));
 	}
 	clk_register_clkdev(atlas6_clks[cpu], NULL, "cpu");
 	clk_register_clkdev(atlas6_clks[io],  NULL, "io");

drivers/clk/tegra/clk-pll.c

@@ -327,16 +327,26 @@ int tegra_pll_wait_for_lock(struct tegra_clk_pll *pll)
 	return clk_pll_wait_for_lock(pll);
 }
 
+static bool pllm_clk_is_gated_by_pmc(struct tegra_clk_pll *pll)
+{
+	u32 val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
+
+	return (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE) &&
+	      !(val & PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE);
+}
+
 static int clk_pll_is_enabled(struct clk_hw *hw)
 {
 	struct tegra_clk_pll *pll = to_clk_pll(hw);
 	u32 val;
 
-	if (pll->params->flags & TEGRA_PLLM) {
-		val = readl_relaxed(pll->pmc + PMC_PLLP_WB0_OVERRIDE);
-		if (val & PMC_PLLP_WB0_OVERRIDE_PLLM_OVERRIDE)
-			return val & PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE ? 1 : 0;
-	}
+	/*
+	 * Power Management Controller (PMC) can override the PLLM clock
+	 * settings, including the enable-state. The PLLM is enabled when
+	 * PLLM's CaR state is ON and when PLLM isn't gated by PMC.
+	 */
+	if ((pll->params->flags & TEGRA_PLLM) && pllm_clk_is_gated_by_pmc(pll))
+		return 0;
 
 	val = pll_readl_base(pll);
 

include/dt-bindings/clock/jz4780-cgu.h

@@ -85,5 +85,7 @@
 #define JZ4780_CLK_DES			70
 #define JZ4780_CLK_X2D			71
 #define JZ4780_CLK_CORE1		72
+#define JZ4780_CLK_EXCLK_DIV512	73
+#define JZ4780_CLK_RTC			74
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4780_CGU_H__ */

include/dt-bindings/clock/x1000-cgu.h

@@ -48,5 +48,7 @@
 #define X1000_CLK_SSI			33
 #define X1000_CLK_OST			34
 #define X1000_CLK_PDMA			35
+#define X1000_CLK_EXCLK_DIV512	36
+#define X1000_CLK_RTC			37
 
 #endif /* __DT_BINDINGS_CLOCK_X1000_CGU_H__ */

include/dt-bindings/clock/x1830-cgu.h

@@ -51,5 +51,7 @@
 #define X1830_CLK_TCU			36
 #define X1830_CLK_DTRNG			37
 #define X1830_CLK_OST			38
+#define X1830_CLK_EXCLK_DIV512	39
+#define X1830_CLK_RTC			40
 
 #endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */