mmc: Move host and card drivers to subdirs

Clean up the drivers/mmc directory by moving card and host drivers
into subdirectories.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

drivers/mmc/Kconfig

@@ -19,110 +19,8 @@ config MMC_DEBUG
 	  This is an option for use by developers; most people should
 	  say N here.  This enables MMC core and driver debugging.
 
-config MMC_BLOCK
-	tristate "MMC block device driver"
-	depends on MMC && BLOCK
-	default y
-	help
-	  Say Y here to enable the MMC block device driver support.
-	  This provides a block device driver, which you can use to
-	  mount the filesystem. Almost everyone wishing MMC support
-	  should say Y or M here.
+source "drivers/mmc/card/Kconfig"
 
-config MMC_ARMMMCI
-	tristate "ARM AMBA Multimedia Card Interface support"
-	depends on ARM_AMBA && MMC
-	help
-	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
-	  Interface (PL180 and PL181) support.  If you have an ARM(R)
-	  platform with a Multimedia Card slot, say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_PXA
-	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
-	depends on ARCH_PXA && MMC
-	help
-	  This selects the Intel(R) PXA(R) Multimedia card Interface.
-	  If you have a PXA(R) platform with a Multimedia Card slot,
-	  say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_SDHCI
-	tristate "Secure Digital Host Controller Interface support  (EXPERIMENTAL)"
-	depends on PCI && MMC && EXPERIMENTAL
-	help
-	  This select the generic Secure Digital Host Controller Interface.
-	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
-	  and Toshiba(R). Most controllers found in laptops are of this type.
-	  If you have a controller with this interface, say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_OMAP
-	tristate "TI OMAP Multimedia Card Interface support"
-	depends on ARCH_OMAP && MMC
-	select TPS65010 if MACH_OMAP_H2
-	help
-	  This selects the TI OMAP Multimedia card Interface.
-	  If you have an OMAP board with a Multimedia Card slot,
-	  say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_WBSD
-	tristate "Winbond W83L51xD SD/MMC Card Interface support"
-	depends on MMC && ISA_DMA_API
-	help
-	  This selects the Winbond(R) W83L51xD Secure digital and
-          Multimedia card Interface.
-	  If you have a machine with a integrated W83L518D or W83L519D
-	  SD/MMC card reader, say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_AU1X
-	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on MMC && SOC_AU1200
-	help
-	  This selects the AMD Alchemy(R) Multimedia card interface.
-	  If you have a Alchemy platform with a MMC slot, say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_AT91
-	tristate "AT91 SD/MMC Card Interface support"
-	depends on ARCH_AT91 && MMC
-	help
-	  This selects the AT91 MCI controller.
-
-	  If unsure, say N.
-
-config MMC_IMX
-	tristate "Motorola i.MX Multimedia Card Interface support"
-	depends on ARCH_IMX && MMC
-	help
-	  This selects the Motorola i.MX Multimedia card Interface.
-	  If you have a i.MX platform with a Multimedia Card slot,
-	  say Y or M here.
-
-	  If unsure, say N.
-
-config MMC_TIFM_SD
-	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
-	depends on MMC && EXPERIMENTAL && PCI
-	select TIFM_CORE
-	help
-	  Say Y here if you want to be able to access MMC/SD cards with
-	  the Texas Instruments(R) Flash Media card reader, found in many
-	  laptops.
-	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
-	  probably also need appropriate card reader host adapter, such as
-	  'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
-	  (TIFM_7XX1)'.
-
-          To compile this driver as a module, choose M here: the
-	  module will be called tifm_sd.
+source "drivers/mmc/host/Kconfig"
 
 endmenu

drivers/mmc/Makefile

@@ -2,32 +2,16 @@
 # Makefile for the kernel mmc device drivers.
 #
 
+ifeq ($(CONFIG_MMC_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
 #
 # Core
 #
 obj-$(CONFIG_MMC)		+= mmc_core.o
+mmc_core-y			:= mmc.o mmc_sysfs.o
 
-#
-# Media drivers
-#
-obj-$(CONFIG_MMC_BLOCK)		+= mmc_block.o
-mmc_block-objs			:= block.o queue.o
+obj-$(CONFIG_MMC)		+= card/
+obj-$(CONFIG_MMC)		+= host/
 
-#
-# Host drivers
-#
-obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
-obj-$(CONFIG_MMC_PXA)		+= pxamci.o
-obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
-obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
-obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
-obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
-obj-$(CONFIG_MMC_OMAP)		+= omap.o
-obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
-obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
-
-mmc_core-y := mmc.o mmc_sysfs.o
-
-ifeq ($(CONFIG_MMC_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif

drivers/mmc/card/Kconfig

@@ -0,0 +1,17 @@
+#
+# MMC/SD card drivers
+#
+
+comment "MMC/SD Card Drivers"
+	depends MMC
+
+config MMC_BLOCK
+	tristate "MMC block device driver"
+	depends on MMC && BLOCK
+	default y
+	help
+	  Say Y here to enable the MMC block device driver support.
+	  This provides a block device driver, which you can use to
+	  mount the filesystem. Almost everyone wishing MMC support
+	  should say Y or M here.
+

drivers/mmc/card/Makefile

@@ -0,0 +1,11 @@
+#
+# Makefile for MMC/SD card drivers
+#
+
+ifeq ($(CONFIG_MMC_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_MMC_BLOCK)		+= mmc_block.o
+mmc_block-objs			:= block.o queue.o
+

drivers/mmc/host/Kconfig

@@ -0,0 +1,103 @@
+#
+# MMC/SD host controller drivers
+#
+
+comment "MMC/SD Host Controller Drivers"
+	depends on MMC
+
+config MMC_ARMMMCI
+	tristate "ARM AMBA Multimedia Card Interface support"
+	depends on ARM_AMBA && MMC
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+	  Interface (PL180 and PL181) support.  If you have an ARM(R)
+	  platform with a Multimedia Card slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_PXA
+	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
+	depends on ARCH_PXA && MMC
+	help
+	  This selects the Intel(R) PXA(R) Multimedia card Interface.
+	  If you have a PXA(R) platform with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_SDHCI
+	tristate "Secure Digital Host Controller Interface support  (EXPERIMENTAL)"
+	depends on PCI && MMC && EXPERIMENTAL
+	help
+	  This select the generic Secure Digital Host Controller Interface.
+	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
+	  and Toshiba(R). Most controllers found in laptops are of this type.
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_OMAP
+	tristate "TI OMAP Multimedia Card Interface support"
+	depends on ARCH_OMAP && MMC
+	select TPS65010 if MACH_OMAP_H2
+	help
+	  This selects the TI OMAP Multimedia card Interface.
+	  If you have an OMAP board with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_WBSD
+	tristate "Winbond W83L51xD SD/MMC Card Interface support"
+	depends on MMC && ISA_DMA_API
+	help
+	  This selects the Winbond(R) W83L51xD Secure digital and
+          Multimedia card Interface.
+	  If you have a machine with a integrated W83L518D or W83L519D
+	  SD/MMC card reader, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_AU1X
+	tristate "Alchemy AU1XX0 MMC Card Interface support"
+	depends on MMC && SOC_AU1200
+	help
+	  This selects the AMD Alchemy(R) Multimedia card interface.
+	  If you have a Alchemy platform with a MMC slot, say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_AT91
+	tristate "AT91 SD/MMC Card Interface support"
+	depends on ARCH_AT91 && MMC
+	help
+	  This selects the AT91 MCI controller.
+
+	  If unsure, say N.
+
+config MMC_IMX
+	tristate "Motorola i.MX Multimedia Card Interface support"
+	depends on ARCH_IMX && MMC
+	help
+	  This selects the Motorola i.MX Multimedia card Interface.
+	  If you have a i.MX platform with a Multimedia Card slot,
+	  say Y or M here.
+
+	  If unsure, say N.
+
+config MMC_TIFM_SD
+	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
+	depends on MMC && EXPERIMENTAL && PCI
+	select TIFM_CORE
+	help
+	  Say Y here if you want to be able to access MMC/SD cards with
+	  the Texas Instruments(R) Flash Media card reader, found in many
+	  laptops.
+	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
+	  probably also need appropriate card reader host adapter, such as
+	  'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
+	  (TIFM_7XX1)'.
+
+          To compile this driver as a module, choose M here: the
+	  module will be called tifm_sd.
+

drivers/mmc/host/Makefile

@@ -0,0 +1,18 @@
+#
+# Makefile for MMC/SD host controller drivers
+#
+
+ifeq ($(CONFIG_MMC_DEBUG),y)
+	EXTRA_CFLAGS		+= -DDEBUG
+endif
+
+obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
+obj-$(CONFIG_MMC_PXA)		+= pxamci.o
+obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
+obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
+obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
+obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
+obj-$(CONFIG_MMC_OMAP)		+= omap.o
+obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
+obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
+