forked from luck/tmp_suning_uos_patched
spi: mediatek: Only do dma for 4-byte aligned buffers
Mediatek SPI DMA only works when tx and rx buffer addresses are 4-byte aligned. Unaligned DMA transactions appeared to work previously, since we the spi core was incorrectly using the spi_master device for dma, which had a 0 dma_mask, and therefore the swiotlb dma map operations were falling back to using bounce buffers. Since each DMA transaction would use its own buffer, the mapped starting address of each transaction was always aligned. When doing real DMA, the mapped address will share the alignment of the raw tx/rx buffer provided by the SPI user, which may or may not be aligned. If a buffer is not aligned, we cannot use DMA, and must use FIFO based transaction instead. So, this patch implements a scheme that allows using the FIFO for arbitrary length transactions (larger than the 32-byte FIFO size) by reloading the FIFO in the interrupt handler. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Cc: Leilk Liu <leilk.liu@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
88b0aa544a
commit
1ce24864bf
|
@ -73,7 +73,7 @@
|
|||
#define MTK_SPI_IDLE 0
|
||||
#define MTK_SPI_PAUSED 1
|
||||
|
||||
#define MTK_SPI_MAX_FIFO_SIZE 32
|
||||
#define MTK_SPI_MAX_FIFO_SIZE 32U
|
||||
#define MTK_SPI_PACKET_SIZE 1024
|
||||
|
||||
struct mtk_spi_compatible {
|
||||
|
@ -333,7 +333,7 @@ static int mtk_spi_fifo_transfer(struct spi_master *master,
|
|||
struct mtk_spi *mdata = spi_master_get_devdata(master);
|
||||
|
||||
mdata->cur_transfer = xfer;
|
||||
mdata->xfer_len = xfer->len;
|
||||
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, xfer->len);
|
||||
mtk_spi_prepare_transfer(master, xfer);
|
||||
mtk_spi_setup_packet(master);
|
||||
|
||||
|
@ -410,7 +410,10 @@ static bool mtk_spi_can_dma(struct spi_master *master,
|
|||
struct spi_device *spi,
|
||||
struct spi_transfer *xfer)
|
||||
{
|
||||
return xfer->len > MTK_SPI_MAX_FIFO_SIZE;
|
||||
/* Buffers for DMA transactions must be 4-byte aligned */
|
||||
return (xfer->len > MTK_SPI_MAX_FIFO_SIZE &&
|
||||
(unsigned long)xfer->tx_buf % 4 == 0 &&
|
||||
(unsigned long)xfer->rx_buf % 4 == 0);
|
||||
}
|
||||
|
||||
static int mtk_spi_setup(struct spi_device *spi)
|
||||
|
@ -451,7 +454,33 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
|
|||
®_val, remainder);
|
||||
}
|
||||
}
|
||||
spi_finalize_current_transfer(master);
|
||||
|
||||
trans->len -= mdata->xfer_len;
|
||||
if (!trans->len) {
|
||||
spi_finalize_current_transfer(master);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (trans->tx_buf)
|
||||
trans->tx_buf += mdata->xfer_len;
|
||||
if (trans->rx_buf)
|
||||
trans->rx_buf += mdata->xfer_len;
|
||||
|
||||
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, trans->len);
|
||||
mtk_spi_setup_packet(master);
|
||||
|
||||
cnt = trans->len / 4;
|
||||
iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf, cnt);
|
||||
|
||||
remainder = trans->len % 4;
|
||||
if (remainder > 0) {
|
||||
reg_val = 0;
|
||||
memcpy(®_val, trans->tx_buf + (cnt * 4), remainder);
|
||||
writel(reg_val, mdata->base + SPI_TX_DATA_REG);
|
||||
}
|
||||
|
||||
mtk_spi_enable_transfer(master);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue
Block a user