forked from luck/tmp_suning_uos_patched
Merge 3.7-rc1 usb-linus
Sync up to a known-good point in Linus's tree to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
commit
1e91adf7cb
14
.gitignore
vendored
14
.gitignore
vendored
|
@ -14,6 +14,10 @@
|
|||
*.o.*
|
||||
*.a
|
||||
*.s
|
||||
*.ko.unsigned
|
||||
*.ko.stripped
|
||||
*.ko.stripped.dig
|
||||
*.ko.stripped.sig
|
||||
*.ko
|
||||
*.so
|
||||
*.so.dbg
|
||||
|
@ -84,3 +88,13 @@ GTAGS
|
|||
*.orig
|
||||
*~
|
||||
\#*#
|
||||
|
||||
#
|
||||
# Leavings from module signing
|
||||
#
|
||||
extra_certificates
|
||||
signing_key.priv
|
||||
signing_key.x509
|
||||
signing_key.x509.keyid
|
||||
signing_key.x509.signer
|
||||
x509.genkey
|
||||
|
|
312
Documentation/crypto/asymmetric-keys.txt
Normal file
312
Documentation/crypto/asymmetric-keys.txt
Normal file
|
@ -0,0 +1,312 @@
|
|||
=============================================
|
||||
ASYMMETRIC / PUBLIC-KEY CRYPTOGRAPHY KEY TYPE
|
||||
=============================================
|
||||
|
||||
Contents:
|
||||
|
||||
- Overview.
|
||||
- Key identification.
|
||||
- Accessing asymmetric keys.
|
||||
- Signature verification.
|
||||
- Asymmetric key subtypes.
|
||||
- Instantiation data parsers.
|
||||
|
||||
|
||||
========
|
||||
OVERVIEW
|
||||
========
|
||||
|
||||
The "asymmetric" key type is designed to be a container for the keys used in
|
||||
public-key cryptography, without imposing any particular restrictions on the
|
||||
form or mechanism of the cryptography or form of the key.
|
||||
|
||||
The asymmetric key is given a subtype that defines what sort of data is
|
||||
associated with the key and provides operations to describe and destroy it.
|
||||
However, no requirement is made that the key data actually be stored in the
|
||||
key.
|
||||
|
||||
A completely in-kernel key retention and operation subtype can be defined, but
|
||||
it would also be possible to provide access to cryptographic hardware (such as
|
||||
a TPM) that might be used to both retain the relevant key and perform
|
||||
operations using that key. In such a case, the asymmetric key would then
|
||||
merely be an interface to the TPM driver.
|
||||
|
||||
Also provided is the concept of a data parser. Data parsers are responsible
|
||||
for extracting information from the blobs of data passed to the instantiation
|
||||
function. The first data parser that recognises the blob gets to set the
|
||||
subtype of the key and define the operations that can be done on that key.
|
||||
|
||||
A data parser may interpret the data blob as containing the bits representing a
|
||||
key, or it may interpret it as a reference to a key held somewhere else in the
|
||||
system (for example, a TPM).
|
||||
|
||||
|
||||
==================
|
||||
KEY IDENTIFICATION
|
||||
==================
|
||||
|
||||
If a key is added with an empty name, the instantiation data parsers are given
|
||||
the opportunity to pre-parse a key and to determine the description the key
|
||||
should be given from the content of the key.
|
||||
|
||||
This can then be used to refer to the key, either by complete match or by
|
||||
partial match. The key type may also use other criteria to refer to a key.
|
||||
|
||||
The asymmetric key type's match function can then perform a wider range of
|
||||
comparisons than just the straightforward comparison of the description with
|
||||
the criterion string:
|
||||
|
||||
(1) If the criterion string is of the form "id:<hexdigits>" then the match
|
||||
function will examine a key's fingerprint to see if the hex digits given
|
||||
after the "id:" match the tail. For instance:
|
||||
|
||||
keyctl search @s asymmetric id:5acc2142
|
||||
|
||||
will match a key with fingerprint:
|
||||
|
||||
1A00 2040 7601 7889 DE11 882C 3823 04AD 5ACC 2142
|
||||
|
||||
(2) If the criterion string is of the form "<subtype>:<hexdigits>" then the
|
||||
match will match the ID as in (1), but with the added restriction that
|
||||
only keys of the specified subtype (e.g. tpm) will be matched. For
|
||||
instance:
|
||||
|
||||
keyctl search @s asymmetric tpm:5acc2142
|
||||
|
||||
Looking in /proc/keys, the last 8 hex digits of the key fingerprint are
|
||||
displayed, along with the subtype:
|
||||
|
||||
1a39e171 I----- 1 perm 3f010000 0 0 asymmetri modsign.0: DSA 5acc2142 []
|
||||
|
||||
|
||||
=========================
|
||||
ACCESSING ASYMMETRIC KEYS
|
||||
=========================
|
||||
|
||||
For general access to asymmetric keys from within the kernel, the following
|
||||
inclusion is required:
|
||||
|
||||
#include <crypto/public_key.h>
|
||||
|
||||
This gives access to functions for dealing with asymmetric / public keys.
|
||||
Three enums are defined there for representing public-key cryptography
|
||||
algorithms:
|
||||
|
||||
enum pkey_algo
|
||||
|
||||
digest algorithms used by those:
|
||||
|
||||
enum pkey_hash_algo
|
||||
|
||||
and key identifier representations:
|
||||
|
||||
enum pkey_id_type
|
||||
|
||||
Note that the key type representation types are required because key
|
||||
identifiers from different standards aren't necessarily compatible. For
|
||||
instance, PGP generates key identifiers by hashing the key data plus some
|
||||
PGP-specific metadata, whereas X.509 has arbitrary certificate identifiers.
|
||||
|
||||
The operations defined upon a key are:
|
||||
|
||||
(1) Signature verification.
|
||||
|
||||
Other operations are possible (such as encryption) with the same key data
|
||||
required for verification, but not currently supported, and others
|
||||
(eg. decryption and signature generation) require extra key data.
|
||||
|
||||
|
||||
SIGNATURE VERIFICATION
|
||||
----------------------
|
||||
|
||||
An operation is provided to perform cryptographic signature verification, using
|
||||
an asymmetric key to provide or to provide access to the public key.
|
||||
|
||||
int verify_signature(const struct key *key,
|
||||
const struct public_key_signature *sig);
|
||||
|
||||
The caller must have already obtained the key from some source and can then use
|
||||
it to check the signature. The caller must have parsed the signature and
|
||||
transferred the relevant bits to the structure pointed to by sig.
|
||||
|
||||
struct public_key_signature {
|
||||
u8 *digest;
|
||||
u8 digest_size;
|
||||
enum pkey_hash_algo pkey_hash_algo : 8;
|
||||
u8 nr_mpi;
|
||||
union {
|
||||
MPI mpi[2];
|
||||
...
|
||||
};
|
||||
};
|
||||
|
||||
The algorithm used must be noted in sig->pkey_hash_algo, and all the MPIs that
|
||||
make up the actual signature must be stored in sig->mpi[] and the count of MPIs
|
||||
placed in sig->nr_mpi.
|
||||
|
||||
In addition, the data must have been digested by the caller and the resulting
|
||||
hash must be pointed to by sig->digest and the size of the hash be placed in
|
||||
sig->digest_size.
|
||||
|
||||
The function will return 0 upon success or -EKEYREJECTED if the signature
|
||||
doesn't match.
|
||||
|
||||
The function may also return -ENOTSUPP if an unsupported public-key algorithm
|
||||
or public-key/hash algorithm combination is specified or the key doesn't
|
||||
support the operation; -EBADMSG or -ERANGE if some of the parameters have weird
|
||||
data; or -ENOMEM if an allocation can't be performed. -EINVAL can be returned
|
||||
if the key argument is the wrong type or is incompletely set up.
|
||||
|
||||
|
||||
=======================
|
||||
ASYMMETRIC KEY SUBTYPES
|
||||
=======================
|
||||
|
||||
Asymmetric keys have a subtype that defines the set of operations that can be
|
||||
performed on that key and that determines what data is attached as the key
|
||||
payload. The payload format is entirely at the whim of the subtype.
|
||||
|
||||
The subtype is selected by the key data parser and the parser must initialise
|
||||
the data required for it. The asymmetric key retains a reference on the
|
||||
subtype module.
|
||||
|
||||
The subtype definition structure can be found in:
|
||||
|
||||
#include <keys/asymmetric-subtype.h>
|
||||
|
||||
and looks like the following:
|
||||
|
||||
struct asymmetric_key_subtype {
|
||||
struct module *owner;
|
||||
const char *name;
|
||||
|
||||
void (*describe)(const struct key *key, struct seq_file *m);
|
||||
void (*destroy)(void *payload);
|
||||
int (*verify_signature)(const struct key *key,
|
||||
const struct public_key_signature *sig);
|
||||
};
|
||||
|
||||
Asymmetric keys point to this with their type_data[0] member.
|
||||
|
||||
The owner and name fields should be set to the owning module and the name of
|
||||
the subtype. Currently, the name is only used for print statements.
|
||||
|
||||
There are a number of operations defined by the subtype:
|
||||
|
||||
(1) describe().
|
||||
|
||||
Mandatory. This allows the subtype to display something in /proc/keys
|
||||
against the key. For instance the name of the public key algorithm type
|
||||
could be displayed. The key type will display the tail of the key
|
||||
identity string after this.
|
||||
|
||||
(2) destroy().
|
||||
|
||||
Mandatory. This should free the memory associated with the key. The
|
||||
asymmetric key will look after freeing the fingerprint and releasing the
|
||||
reference on the subtype module.
|
||||
|
||||
(3) verify_signature().
|
||||
|
||||
Optional. These are the entry points for the key usage operations.
|
||||
Currently there is only the one defined. If not set, the caller will be
|
||||
given -ENOTSUPP. The subtype may do anything it likes to implement an
|
||||
operation, including offloading to hardware.
|
||||
|
||||
|
||||
==========================
|
||||
INSTANTIATION DATA PARSERS
|
||||
==========================
|
||||
|
||||
The asymmetric key type doesn't generally want to store or to deal with a raw
|
||||
blob of data that holds the key data. It would have to parse it and error
|
||||
check it each time it wanted to use it. Further, the contents of the blob may
|
||||
have various checks that can be performed on it (eg. self-signatures, validity
|
||||
dates) and may contain useful data about the key (identifiers, capabilities).
|
||||
|
||||
Also, the blob may represent a pointer to some hardware containing the key
|
||||
rather than the key itself.
|
||||
|
||||
Examples of blob formats for which parsers could be implemented include:
|
||||
|
||||
- OpenPGP packet stream [RFC 4880].
|
||||
- X.509 ASN.1 stream.
|
||||
- Pointer to TPM key.
|
||||
- Pointer to UEFI key.
|
||||
|
||||
During key instantiation each parser in the list is tried until one doesn't
|
||||
return -EBADMSG.
|
||||
|
||||
The parser definition structure can be found in:
|
||||
|
||||
#include <keys/asymmetric-parser.h>
|
||||
|
||||
and looks like the following:
|
||||
|
||||
struct asymmetric_key_parser {
|
||||
struct module *owner;
|
||||
const char *name;
|
||||
|
||||
int (*parse)(struct key_preparsed_payload *prep);
|
||||
};
|
||||
|
||||
The owner and name fields should be set to the owning module and the name of
|
||||
the parser.
|
||||
|
||||
There is currently only a single operation defined by the parser, and it is
|
||||
mandatory:
|
||||
|
||||
(1) parse().
|
||||
|
||||
This is called to preparse the key from the key creation and update paths.
|
||||
In particular, it is called during the key creation _before_ a key is
|
||||
allocated, and as such, is permitted to provide the key's description in
|
||||
the case that the caller declines to do so.
|
||||
|
||||
The caller passes a pointer to the following struct with all of the fields
|
||||
cleared, except for data, datalen and quotalen [see
|
||||
Documentation/security/keys.txt].
|
||||
|
||||
struct key_preparsed_payload {
|
||||
char *description;
|
||||
void *type_data[2];
|
||||
void *payload;
|
||||
const void *data;
|
||||
size_t datalen;
|
||||
size_t quotalen;
|
||||
};
|
||||
|
||||
The instantiation data is in a blob pointed to by data and is datalen in
|
||||
size. The parse() function is not permitted to change these two values at
|
||||
all, and shouldn't change any of the other values _unless_ they are
|
||||
recognise the blob format and will not return -EBADMSG to indicate it is
|
||||
not theirs.
|
||||
|
||||
If the parser is happy with the blob, it should propose a description for
|
||||
the key and attach it to ->description, ->type_data[0] should be set to
|
||||
point to the subtype to be used, ->payload should be set to point to the
|
||||
initialised data for that subtype, ->type_data[1] should point to a hex
|
||||
fingerprint and quotalen should be updated to indicate how much quota this
|
||||
key should account for.
|
||||
|
||||
When clearing up, the data attached to ->type_data[1] and ->description
|
||||
will be kfree()'d and the data attached to ->payload will be passed to the
|
||||
subtype's ->destroy() method to be disposed of. A module reference for
|
||||
the subtype pointed to by ->type_data[0] will be put.
|
||||
|
||||
|
||||
If the data format is not recognised, -EBADMSG should be returned. If it
|
||||
is recognised, but the key cannot for some reason be set up, some other
|
||||
negative error code should be returned. On success, 0 should be returned.
|
||||
|
||||
The key's fingerprint string may be partially matched upon. For a
|
||||
public-key algorithm such as RSA and DSA this will likely be a printable
|
||||
hex version of the key's fingerprint.
|
||||
|
||||
Functions are provided to register and unregister parsers:
|
||||
|
||||
int register_asymmetric_key_parser(struct asymmetric_key_parser *parser);
|
||||
void unregister_asymmetric_key_parser(struct asymmetric_key_parser *subtype);
|
||||
|
||||
Parsers may not have the same name. The names are otherwise only used for
|
||||
displaying in debugging messages.
|
|
@ -1593,6 +1593,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
|||
log everything. Information is printed at KERN_DEBUG
|
||||
so loglevel=8 may also need to be specified.
|
||||
|
||||
module.sig_enforce
|
||||
[KNL] When CONFIG_MODULE_SIG is set, this means that
|
||||
modules without (valid) signatures will fail to load.
|
||||
Note that if CONFIG_MODULE_SIG_ENFORCE is set, that
|
||||
is always true, so this option does nothing.
|
||||
|
||||
mousedev.tap_time=
|
||||
[MOUSE] Maximum time between finger touching and
|
||||
leaving touchpad surface for touch to be considered
|
||||
|
|
|
@ -412,6 +412,10 @@ The main syscalls are:
|
|||
to the keyring. In this case, an error will be generated if the process
|
||||
does not have permission to write to the keyring.
|
||||
|
||||
If the key type supports it, if the description is NULL or an empty
|
||||
string, the key type will try and generate a description from the content
|
||||
of the payload.
|
||||
|
||||
The payload is optional, and the pointer can be NULL if not required by
|
||||
the type. The payload is plen in size, and plen can be zero for an empty
|
||||
payload.
|
||||
|
@ -1114,12 +1118,53 @@ The structure has a number of fields, some of which are mandatory:
|
|||
it should return 0.
|
||||
|
||||
|
||||
(*) int (*instantiate)(struct key *key, const void *data, size_t datalen);
|
||||
(*) int (*preparse)(struct key_preparsed_payload *prep);
|
||||
|
||||
This optional method permits the key type to attempt to parse payload
|
||||
before a key is created (add key) or the key semaphore is taken (update or
|
||||
instantiate key). The structure pointed to by prep looks like:
|
||||
|
||||
struct key_preparsed_payload {
|
||||
char *description;
|
||||
void *type_data[2];
|
||||
void *payload;
|
||||
const void *data;
|
||||
size_t datalen;
|
||||
size_t quotalen;
|
||||
};
|
||||
|
||||
Before calling the method, the caller will fill in data and datalen with
|
||||
the payload blob parameters; quotalen will be filled in with the default
|
||||
quota size from the key type and the rest will be cleared.
|
||||
|
||||
If a description can be proposed from the payload contents, that should be
|
||||
attached as a string to the description field. This will be used for the
|
||||
key description if the caller of add_key() passes NULL or "".
|
||||
|
||||
The method can attach anything it likes to type_data[] and payload. These
|
||||
are merely passed along to the instantiate() or update() operations.
|
||||
|
||||
The method should return 0 if success ful or a negative error code
|
||||
otherwise.
|
||||
|
||||
|
||||
(*) void (*free_preparse)(struct key_preparsed_payload *prep);
|
||||
|
||||
This method is only required if the preparse() method is provided,
|
||||
otherwise it is unused. It cleans up anything attached to the
|
||||
description, type_data and payload fields of the key_preparsed_payload
|
||||
struct as filled in by the preparse() method.
|
||||
|
||||
|
||||
(*) int (*instantiate)(struct key *key, struct key_preparsed_payload *prep);
|
||||
|
||||
This method is called to attach a payload to a key during construction.
|
||||
The payload attached need not bear any relation to the data passed to this
|
||||
function.
|
||||
|
||||
The prep->data and prep->datalen fields will define the original payload
|
||||
blob. If preparse() was supplied then other fields may be filled in also.
|
||||
|
||||
If the amount of data attached to the key differs from the size in
|
||||
keytype->def_datalen, then key_payload_reserve() should be called.
|
||||
|
||||
|
@ -1135,6 +1180,9 @@ The structure has a number of fields, some of which are mandatory:
|
|||
If this type of key can be updated, then this method should be provided.
|
||||
It is called to update a key's payload from the blob of data provided.
|
||||
|
||||
The prep->data and prep->datalen fields will define the original payload
|
||||
blob. If preparse() was supplied then other fields may be filled in also.
|
||||
|
||||
key_payload_reserve() should be called if the data length might change
|
||||
before any changes are actually made. Note that if this succeeds, the type
|
||||
is committed to changing the key because it's already been altered, so all
|
||||
|
|
10
Makefile
10
Makefile
|
@ -1,7 +1,7 @@
|
|||
VERSION = 3
|
||||
PATCHLEVEL = 6
|
||||
PATCHLEVEL = 7
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION =
|
||||
EXTRAVERSION = -rc1
|
||||
NAME = Terrified Chipmunk
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
@ -997,7 +997,10 @@ CLEAN_DIRS += $(MODVERDIR)
|
|||
MRPROPER_DIRS += include/config usr/include include/generated \
|
||||
arch/*/include/generated
|
||||
MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
|
||||
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
|
||||
Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
|
||||
signing_key.priv signing_key.x509 x509.genkey \
|
||||
extra_certificates signing_key.x509.keyid \
|
||||
signing_key.x509.signer
|
||||
|
||||
# clean - Delete most, but leave enough to build external modules
|
||||
#
|
||||
|
@ -1241,6 +1244,7 @@ clean: $(clean-dirs)
|
|||
$(call cmd,rmfiles)
|
||||
@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
|
||||
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
|
||||
-o -name '*.ko.*' \
|
||||
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
|
||||
-o -name '*.symtypes' -o -name 'modules.order' \
|
||||
-o -name modules.builtin -o -name '.tmp_*.o.*' \
|
||||
|
|
19
arch/Kconfig
19
arch/Kconfig
|
@ -322,4 +322,23 @@ config HAVE_IRQ_TIME_ACCOUNTING
|
|||
config HAVE_ARCH_TRANSPARENT_HUGEPAGE
|
||||
bool
|
||||
|
||||
config HAVE_MOD_ARCH_SPECIFIC
|
||||
bool
|
||||
help
|
||||
The arch uses struct mod_arch_specific to store data. Many arches
|
||||
just need a simple module loader without arch specific data - those
|
||||
should not enable this.
|
||||
|
||||
config MODULES_USE_ELF_RELA
|
||||
bool
|
||||
help
|
||||
Modules only use ELF RELA relocations. Modules with ELF REL
|
||||
relocations will give an error.
|
||||
|
||||
config MODULES_USE_ELF_REL
|
||||
bool
|
||||
help
|
||||
Modules only use ELF REL relocations. Modules with ELF RELA
|
||||
relocations will give an error.
|
||||
|
||||
source "kernel/gcov/Kconfig"
|
||||
|
|
|
@ -22,6 +22,8 @@ config ALPHA
|
|||
select GENERIC_STRNLEN_USER
|
||||
select GENERIC_KERNEL_THREAD
|
||||
select GENERIC_KERNEL_EXECVE
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_RELA
|
||||
help
|
||||
The Alpha is a 64-bit general-purpose processor designed and
|
||||
marketed by the Digital Equipment Corporation of blessed memory,
|
||||
|
|
|
@ -1,19 +1,13 @@
|
|||
#ifndef _ALPHA_MODULE_H
|
||||
#define _ALPHA_MODULE_H
|
||||
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
struct mod_arch_specific
|
||||
{
|
||||
unsigned int gotsecindex;
|
||||
};
|
||||
|
||||
#define Elf_Sym Elf64_Sym
|
||||
#define Elf_Shdr Elf64_Shdr
|
||||
#define Elf_Ehdr Elf64_Ehdr
|
||||
#define Elf_Phdr Elf64_Phdr
|
||||
#define Elf_Dyn Elf64_Dyn
|
||||
#define Elf_Rel Elf64_Rel
|
||||
#define Elf_Rela Elf64_Rela
|
||||
|
||||
#define ARCH_SHF_SMALL SHF_ALPHA_GPREL
|
||||
|
||||
#ifdef MODULE
|
||||
|
|
489
arch/arm/Kconfig
489
arch/arm/Kconfig
File diff suppressed because it is too large
Load Diff
|
@ -1,15 +1,15 @@
|
|||
config ARM_GIC
|
||||
bool
|
||||
select IRQ_DOMAIN
|
||||
select MULTI_IRQ_HANDLER
|
||||
bool
|
||||
|
||||
config GIC_NON_BANKED
|
||||
bool
|
||||
|
||||
config ARM_VIC
|
||||
bool
|
||||
select IRQ_DOMAIN
|
||||
select MULTI_IRQ_HANDLER
|
||||
bool
|
||||
|
||||
config ARM_VIC_NR
|
||||
int
|
||||
|
|
|
@ -1,6 +1,4 @@
|
|||
include include/asm-generic/Kbuild.asm
|
||||
|
||||
header-y += hwcap.h
|
||||
|
||||
generic-y += auxvec.h
|
||||
generic-y += bitsperlong.h
|
||||
|
|
|
@ -1,31 +1,8 @@
|
|||
#ifndef __ASMARM_HWCAP_H
|
||||
#define __ASMARM_HWCAP_H
|
||||
|
||||
/*
|
||||
* HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
|
||||
*/
|
||||
#define HWCAP_SWP (1 << 0)
|
||||
#define HWCAP_HALF (1 << 1)
|
||||
#define HWCAP_THUMB (1 << 2)
|
||||
#define HWCAP_26BIT (1 << 3) /* Play it safe */
|
||||
#define HWCAP_FAST_MULT (1 << 4)
|
||||
#define HWCAP_FPA (1 << 5)
|
||||
#define HWCAP_VFP (1 << 6)
|
||||
#define HWCAP_EDSP (1 << 7)
|
||||
#define HWCAP_JAVA (1 << 8)
|
||||
#define HWCAP_IWMMXT (1 << 9)
|
||||
#define HWCAP_CRUNCH (1 << 10)
|
||||
#define HWCAP_THUMBEE (1 << 11)
|
||||
#define HWCAP_NEON (1 << 12)
|
||||
#define HWCAP_VFPv3 (1 << 13)
|
||||
#define HWCAP_VFPv3D16 (1 << 14)
|
||||
#define HWCAP_TLS (1 << 15)
|
||||
#define HWCAP_VFPv4 (1 << 16)
|
||||
#define HWCAP_IDIVA (1 << 17)
|
||||
#define HWCAP_IDIVT (1 << 18)
|
||||
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
|
||||
#include <uapi/asm/hwcap.h>
|
||||
|
||||
#if defined(__KERNEL__)
|
||||
#if !defined(__ASSEMBLY__)
|
||||
/*
|
||||
* This yields a mask that user programs can use to figure out what
|
||||
|
@ -35,5 +12,3 @@
|
|||
extern unsigned int elf_hwcap;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
@ -1,9 +1,7 @@
|
|||
#ifndef _ASM_ARM_MODULE_H
|
||||
#define _ASM_ARM_MODULE_H
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
struct unwind_table;
|
||||
|
||||
|
@ -16,13 +14,11 @@ enum {
|
|||
ARM_SEC_DEVEXIT,
|
||||
ARM_SEC_MAX,
|
||||
};
|
||||
#endif
|
||||
|
||||
struct mod_arch_specific {
|
||||
#ifdef CONFIG_ARM_UNWIND
|
||||
struct unwind_table *unwind[ARM_SEC_MAX];
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Add the ARM architecture version to the version magic string
|
||||
|
|
|
@ -10,133 +10,12 @@
|
|||
#ifndef __ASM_ARM_PTRACE_H
|
||||
#define __ASM_ARM_PTRACE_H
|
||||
|
||||
#include <asm/hwcap.h>
|
||||
|
||||
#define PTRACE_GETREGS 12
|
||||
#define PTRACE_SETREGS 13
|
||||
#define PTRACE_GETFPREGS 14
|
||||
#define PTRACE_SETFPREGS 15
|
||||
/* PTRACE_ATTACH is 16 */
|
||||
/* PTRACE_DETACH is 17 */
|
||||
#define PTRACE_GETWMMXREGS 18
|
||||
#define PTRACE_SETWMMXREGS 19
|
||||
/* 20 is unused */
|
||||
#define PTRACE_OLDSETOPTIONS 21
|
||||
#define PTRACE_GET_THREAD_AREA 22
|
||||
#define PTRACE_SET_SYSCALL 23
|
||||
/* PTRACE_SYSCALL is 24 */
|
||||
#define PTRACE_GETCRUNCHREGS 25
|
||||
#define PTRACE_SETCRUNCHREGS 26
|
||||
#define PTRACE_GETVFPREGS 27
|
||||
#define PTRACE_SETVFPREGS 28
|
||||
#define PTRACE_GETHBPREGS 29
|
||||
#define PTRACE_SETHBPREGS 30
|
||||
|
||||
/*
|
||||
* PSR bits
|
||||
*/
|
||||
#define USR26_MODE 0x00000000
|
||||
#define FIQ26_MODE 0x00000001
|
||||
#define IRQ26_MODE 0x00000002
|
||||
#define SVC26_MODE 0x00000003
|
||||
#define USR_MODE 0x00000010
|
||||
#define FIQ_MODE 0x00000011
|
||||
#define IRQ_MODE 0x00000012
|
||||
#define SVC_MODE 0x00000013
|
||||
#define ABT_MODE 0x00000017
|
||||
#define HYP_MODE 0x0000001a
|
||||
#define UND_MODE 0x0000001b
|
||||
#define SYSTEM_MODE 0x0000001f
|
||||
#define MODE32_BIT 0x00000010
|
||||
#define MODE_MASK 0x0000001f
|
||||
#define PSR_T_BIT 0x00000020
|
||||
#define PSR_F_BIT 0x00000040
|
||||
#define PSR_I_BIT 0x00000080
|
||||
#define PSR_A_BIT 0x00000100
|
||||
#define PSR_E_BIT 0x00000200
|
||||
#define PSR_J_BIT 0x01000000
|
||||
#define PSR_Q_BIT 0x08000000
|
||||
#define PSR_V_BIT 0x10000000
|
||||
#define PSR_C_BIT 0x20000000
|
||||
#define PSR_Z_BIT 0x40000000
|
||||
#define PSR_N_BIT 0x80000000
|
||||
|
||||
/*
|
||||
* Groups of PSR bits
|
||||
*/
|
||||
#define PSR_f 0xff000000 /* Flags */
|
||||
#define PSR_s 0x00ff0000 /* Status */
|
||||
#define PSR_x 0x0000ff00 /* Extension */
|
||||
#define PSR_c 0x000000ff /* Control */
|
||||
|
||||
/*
|
||||
* ARMv7 groups of PSR bits
|
||||
*/
|
||||
#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */
|
||||
#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
|
||||
#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
|
||||
#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
|
||||
|
||||
/*
|
||||
* Default endianness state
|
||||
*/
|
||||
#ifdef CONFIG_CPU_ENDIAN_BE8
|
||||
#define PSR_ENDSTATE PSR_E_BIT
|
||||
#else
|
||||
#define PSR_ENDSTATE 0
|
||||
#endif
|
||||
|
||||
/*
|
||||
* These are 'magic' values for PTRACE_PEEKUSR that return info about where a
|
||||
* process is located in memory.
|
||||
*/
|
||||
#define PT_TEXT_ADDR 0x10000
|
||||
#define PT_DATA_ADDR 0x10004
|
||||
#define PT_TEXT_END_ADDR 0x10008
|
||||
#include <uapi/asm/ptrace.h>
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/*
|
||||
* This struct defines the way the registers are stored on the
|
||||
* stack during a system call. Note that sizeof(struct pt_regs)
|
||||
* has to be a multiple of 8.
|
||||
*/
|
||||
#ifndef __KERNEL__
|
||||
struct pt_regs {
|
||||
long uregs[18];
|
||||
};
|
||||
#else /* __KERNEL__ */
|
||||
struct pt_regs {
|
||||
unsigned long uregs[18];
|
||||
};
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#define ARM_cpsr uregs[16]
|
||||
#define ARM_pc uregs[15]
|
||||
#define ARM_lr uregs[14]
|
||||
#define ARM_sp uregs[13]
|
||||
#define ARM_ip uregs[12]
|
||||
#define ARM_fp uregs[11]
|
||||
#define ARM_r10 uregs[10]
|
||||
#define ARM_r9 uregs[9]
|
||||
#define ARM_r8 uregs[8]
|
||||
#define ARM_r7 uregs[7]
|
||||
#define ARM_r6 uregs[6]
|
||||
#define ARM_r5 uregs[5]
|
||||
#define ARM_r4 uregs[4]
|
||||
#define ARM_r3 uregs[3]
|
||||
#define ARM_r2 uregs[2]
|
||||
#define ARM_r1 uregs[1]
|
||||
#define ARM_r0 uregs[0]
|
||||
#define ARM_ORIG_r0 uregs[17]
|
||||
|
||||
/*
|
||||
* The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
|
||||
* and core dumps.
|
||||
*/
|
||||
#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#define user_mode(regs) \
|
||||
(((regs)->ARM_cpsr & 0xf) == 0)
|
||||
|
@ -260,9 +139,5 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
|
|||
(struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1; \
|
||||
})
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
@ -14,176 +14,8 @@
|
|||
#ifndef __ASMARM_SETUP_H
|
||||
#define __ASMARM_SETUP_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <uapi/asm/setup.h>
|
||||
|
||||
#define COMMAND_LINE_SIZE 1024
|
||||
|
||||
/* The list ends with an ATAG_NONE node. */
|
||||
#define ATAG_NONE 0x00000000
|
||||
|
||||
struct tag_header {
|
||||
__u32 size;
|
||||
__u32 tag;
|
||||
};
|
||||
|
||||
/* The list must start with an ATAG_CORE node */
|
||||
#define ATAG_CORE 0x54410001
|
||||
|
||||
struct tag_core {
|
||||
__u32 flags; /* bit 0 = read-only */
|
||||
__u32 pagesize;
|
||||
__u32 rootdev;
|
||||
};
|
||||
|
||||
/* it is allowed to have multiple ATAG_MEM nodes */
|
||||
#define ATAG_MEM 0x54410002
|
||||
|
||||
struct tag_mem32 {
|
||||
__u32 size;
|
||||
__u32 start; /* physical start address */
|
||||
};
|
||||
|
||||
/* VGA text type displays */
|
||||
#define ATAG_VIDEOTEXT 0x54410003
|
||||
|
||||
struct tag_videotext {
|
||||
__u8 x;
|
||||
__u8 y;
|
||||
__u16 video_page;
|
||||
__u8 video_mode;
|
||||
__u8 video_cols;
|
||||
__u16 video_ega_bx;
|
||||
__u8 video_lines;
|
||||
__u8 video_isvga;
|
||||
__u16 video_points;
|
||||
};
|
||||
|
||||
/* describes how the ramdisk will be used in kernel */
|
||||
#define ATAG_RAMDISK 0x54410004
|
||||
|
||||
struct tag_ramdisk {
|
||||
__u32 flags; /* bit 0 = load, bit 1 = prompt */
|
||||
__u32 size; /* decompressed ramdisk size in _kilo_ bytes */
|
||||
__u32 start; /* starting block of floppy-based RAM disk image */
|
||||
};
|
||||
|
||||
/* describes where the compressed ramdisk image lives (virtual address) */
|
||||
/*
|
||||
* this one accidentally used virtual addresses - as such,
|
||||
* it's deprecated.
|
||||
*/
|
||||
#define ATAG_INITRD 0x54410005
|
||||
|
||||
/* describes where the compressed ramdisk image lives (physical address) */
|
||||
#define ATAG_INITRD2 0x54420005
|
||||
|
||||
struct tag_initrd {
|
||||
__u32 start; /* physical start address */
|
||||
__u32 size; /* size of compressed ramdisk image in bytes */
|
||||
};
|
||||
|
||||
/* board serial number. "64 bits should be enough for everybody" */
|
||||
#define ATAG_SERIAL 0x54410006
|
||||
|
||||
struct tag_serialnr {
|
||||
__u32 low;
|
||||
__u32 high;
|
||||
};
|
||||
|
||||
/* board revision */
|
||||
#define ATAG_REVISION 0x54410007
|
||||
|
||||
struct tag_revision {
|
||||
__u32 rev;
|
||||
};
|
||||
|
||||
/* initial values for vesafb-type framebuffers. see struct screen_info
|
||||
* in include/linux/tty.h
|
||||
*/
|
||||
#define ATAG_VIDEOLFB 0x54410008
|
||||
|
||||
struct tag_videolfb {
|
||||
__u16 lfb_width;
|
||||
__u16 lfb_height;
|
||||
__u16 lfb_depth;
|
||||
__u16 lfb_linelength;
|
||||
__u32 lfb_base;
|
||||
__u32 lfb_size;
|
||||
__u8 red_size;
|
||||
__u8 red_pos;
|
||||
__u8 green_size;
|
||||
__u8 green_pos;
|
||||
__u8 blue_size;
|
||||
__u8 blue_pos;
|
||||
__u8 rsvd_size;
|
||||
__u8 rsvd_pos;
|
||||
};
|
||||
|
||||
/* command line: \0 terminated string */
|
||||
#define ATAG_CMDLINE 0x54410009
|
||||
|
||||
struct tag_cmdline {
|
||||
char cmdline[1]; /* this is the minimum size */
|
||||
};
|
||||
|
||||
/* acorn RiscPC specific information */
|
||||
#define ATAG_ACORN 0x41000101
|
||||
|
||||
struct tag_acorn {
|
||||
__u32 memc_control_reg;
|
||||
__u32 vram_pages;
|
||||
__u8 sounddefault;
|
||||
__u8 adfsdrives;
|
||||
};
|
||||
|
||||
/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
|
||||
#define ATAG_MEMCLK 0x41000402
|
||||
|
||||
struct tag_memclk {
|
||||
__u32 fmemclk;
|
||||
};
|
||||
|
||||
struct tag {
|
||||
struct tag_header hdr;
|
||||
union {
|
||||
struct tag_core core;
|
||||
struct tag_mem32 mem;
|
||||
struct tag_videotext videotext;
|
||||
struct tag_ramdisk ramdisk;
|
||||
struct tag_initrd initrd;
|
||||
struct tag_serialnr serialnr;
|
||||
struct tag_revision revision;
|
||||
struct tag_videolfb videolfb;
|
||||
struct tag_cmdline cmdline;
|
||||
|
||||
/*
|
||||
* Acorn specific
|
||||
*/
|
||||
struct tag_acorn acorn;
|
||||
|
||||
/*
|
||||
* DC21285 specific
|
||||
*/
|
||||
struct tag_memclk memclk;
|
||||
} u;
|
||||
};
|
||||
|
||||
struct tagtable {
|
||||
__u32 tag;
|
||||
int (*parse)(const struct tag *);
|
||||
};
|
||||
|
||||
#define tag_member_present(tag,member) \
|
||||
((unsigned long)(&((struct tag *)0L)->member + 1) \
|
||||
<= (tag)->hdr.size * 4)
|
||||
|
||||
#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size))
|
||||
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
|
||||
|
||||
#define for_each_tag(t,base) \
|
||||
for (t = base; t->hdr.size; t = tag_next(t))
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#define __tag __used __attribute__((__section__(".taglist.init")))
|
||||
#define __tagtable(tag, fn) \
|
||||
|
@ -221,6 +53,4 @@ extern int arm_add_memory(phys_addr_t start, phys_addr_t size);
|
|||
extern void early_print(const char *str, ...);
|
||||
extern void dump_machine_table(void);
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif
|
||||
|
|
|
@ -1,12 +1,8 @@
|
|||
#ifndef _ASMARM_SIGNAL_H
|
||||
#define _ASMARM_SIGNAL_H
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <uapi/asm/signal.h>
|
||||
|
||||
/* Avoid too many header ordering problems. */
|
||||
struct siginfo;
|
||||
|
||||
#ifdef __KERNEL__
|
||||
/* Most things should be clean enough to redefine this at will, if care
|
||||
is taken to make libc match. */
|
||||
|
||||
|
@ -20,100 +16,6 @@ typedef struct {
|
|||
unsigned long sig[_NSIG_WORDS];
|
||||
} sigset_t;
|
||||
|
||||
#else
|
||||
/* Here we must cater to libcs that poke about in kernel headers. */
|
||||
|
||||
#define NSIG 32
|
||||
typedef unsigned long sigset_t;
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#define SIGHUP 1
|
||||
#define SIGINT 2
|
||||
#define SIGQUIT 3
|
||||
#define SIGILL 4
|
||||
#define SIGTRAP 5
|
||||
#define SIGABRT 6
|
||||
#define SIGIOT 6
|
||||
#define SIGBUS 7
|
||||
#define SIGFPE 8
|
||||
#define SIGKILL 9
|
||||
#define SIGUSR1 10
|
||||
#define SIGSEGV 11
|
||||
#define SIGUSR2 12
|
||||
#define SIGPIPE 13
|
||||
#define SIGALRM 14
|
||||
#define SIGTERM 15
|
||||
#define SIGSTKFLT 16
|
||||
#define SIGCHLD 17
|
||||
#define SIGCONT 18
|
||||
#define SIGSTOP 19
|
||||
#define SIGTSTP 20
|
||||
#define SIGTTIN 21
|
||||
#define SIGTTOU 22
|
||||
#define SIGURG 23
|
||||
#define SIGXCPU 24
|
||||
#define SIGXFSZ 25
|
||||
#define SIGVTALRM 26
|
||||
#define SIGPROF 27
|
||||
#define SIGWINCH 28
|
||||
#define SIGIO 29
|
||||
#define SIGPOLL SIGIO
|
||||
/*
|
||||
#define SIGLOST 29
|
||||
*/
|
||||
#define SIGPWR 30
|
||||
#define SIGSYS 31
|
||||
#define SIGUNUSED 31
|
||||
|
||||
/* These should not be considered constants from userland. */
|
||||
#define SIGRTMIN 32
|
||||
#define SIGRTMAX _NSIG
|
||||
|
||||
#define SIGSWI 32
|
||||
|
||||
/*
|
||||
* SA_FLAGS values:
|
||||
*
|
||||
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
|
||||
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
|
||||
* SA_SIGINFO deliver the signal with SIGINFO structs
|
||||
* SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task
|
||||
* is running in 26-bit.
|
||||
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
|
||||
* SA_RESTART flag to get restarting signals (which were the default long ago)
|
||||
* SA_NODEFER prevents the current signal from being masked in the handler.
|
||||
* SA_RESETHAND clears the handler when the signal is delivered.
|
||||
*
|
||||
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
|
||||
* Unix names RESETHAND and NODEFER respectively.
|
||||
*/
|
||||
#define SA_NOCLDSTOP 0x00000001
|
||||
#define SA_NOCLDWAIT 0x00000002
|
||||
#define SA_SIGINFO 0x00000004
|
||||
#define SA_THIRTYTWO 0x02000000
|
||||
#define SA_RESTORER 0x04000000
|
||||
#define SA_ONSTACK 0x08000000
|
||||
#define SA_RESTART 0x10000000
|
||||
#define SA_NODEFER 0x40000000
|
||||
#define SA_RESETHAND 0x80000000
|
||||
|
||||
#define SA_NOMASK SA_NODEFER
|
||||
#define SA_ONESHOT SA_RESETHAND
|
||||
|
||||
|
||||
/*
|
||||
* sigaltstack controls
|
||||
*/
|
||||
#define SS_ONSTACK 1
|
||||
#define SS_DISABLE 2
|
||||
|
||||
#define MINSIGSTKSZ 2048
|
||||
#define SIGSTKSZ 8192
|
||||
|
||||
#include <asm-generic/signal-defs.h>
|
||||
|
||||
#ifdef __KERNEL__
|
||||
struct old_sigaction {
|
||||
__sighandler_t sa_handler;
|
||||
old_sigset_t sa_mask;
|
||||
|
@ -132,33 +34,6 @@ struct k_sigaction {
|
|||
struct sigaction sa;
|
||||
};
|
||||
|
||||
#else
|
||||
/* Here we must cater to libcs that poke about in kernel headers. */
|
||||
|
||||
struct sigaction {
|
||||
union {
|
||||
__sighandler_t _sa_handler;
|
||||
void (*_sa_sigaction)(int, struct siginfo *, void *);
|
||||
} _u;
|
||||
sigset_t sa_mask;
|
||||
unsigned long sa_flags;
|
||||
void (*sa_restorer)(void);
|
||||
};
|
||||
|
||||
#define sa_handler _u._sa_handler
|
||||
#define sa_sigaction _u._sa_sigaction
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
typedef struct sigaltstack {
|
||||
void __user *ss_sp;
|
||||
int ss_flags;
|
||||
size_t ss_size;
|
||||
} stack_t;
|
||||
|
||||
#ifdef __KERNEL__
|
||||
#include <asm/sigcontext.h>
|
||||
#define ptrace_signal_deliver(regs, cookie) do { } while (0)
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
@ -15,14 +15,8 @@
|
|||
#ifndef __ASM_ARM_SWAB_H
|
||||
#define __ASM_ARM_SWAB_H
|
||||
|
||||
#include <linux/compiler.h>
|
||||
#include <linux/types.h>
|
||||
#include <uapi/asm/swab.h>
|
||||
|
||||
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
|
||||
# define __SWAB_64_THRU_32__
|
||||
#endif
|
||||
|
||||
#if defined(__KERNEL__)
|
||||
#if __LINUX_ARM_ARCH__ >= 6
|
||||
|
||||
static inline __attribute_const__ __u32 __arch_swahb32(__u32 x)
|
||||
|
@ -42,32 +36,3 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
|
|||
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
|
||||
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
|
||||
{
|
||||
__u32 t;
|
||||
|
||||
#ifndef __thumb__
|
||||
if (!__builtin_constant_p(x)) {
|
||||
/*
|
||||
* The compiler needs a bit of a hint here to always do the
|
||||
* right thing and not screw it up to different degrees
|
||||
* depending on the gcc version.
|
||||
*/
|
||||
asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
|
||||
} else
|
||||
#endif
|
||||
t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
|
||||
|
||||
x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */
|
||||
t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */
|
||||
x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */
|
||||
|
||||
return x;
|
||||
}
|
||||
#define __arch_swab32 __arch_swab32
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
@ -13,447 +13,10 @@
|
|||
#ifndef __ASM_ARM_UNISTD_H
|
||||
#define __ASM_ARM_UNISTD_H
|
||||
|
||||
#define __NR_OABI_SYSCALL_BASE 0x900000
|
||||
#include <uapi/asm/unistd.h>
|
||||
|
||||
#if defined(__thumb__) || defined(__ARM_EABI__)
|
||||
#define __NR_SYSCALL_BASE 0
|
||||
#else
|
||||
#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This file contains the system call numbers.
|
||||
*/
|
||||
|
||||
#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0)
|
||||
#define __NR_exit (__NR_SYSCALL_BASE+ 1)
|
||||
#define __NR_fork (__NR_SYSCALL_BASE+ 2)
|
||||
#define __NR_read (__NR_SYSCALL_BASE+ 3)
|
||||
#define __NR_write (__NR_SYSCALL_BASE+ 4)
|
||||
#define __NR_open (__NR_SYSCALL_BASE+ 5)
|
||||
#define __NR_close (__NR_SYSCALL_BASE+ 6)
|
||||
/* 7 was sys_waitpid */
|
||||
#define __NR_creat (__NR_SYSCALL_BASE+ 8)
|
||||
#define __NR_link (__NR_SYSCALL_BASE+ 9)
|
||||
#define __NR_unlink (__NR_SYSCALL_BASE+ 10)
|
||||
#define __NR_execve (__NR_SYSCALL_BASE+ 11)
|
||||
#define __NR_chdir (__NR_SYSCALL_BASE+ 12)
|
||||
#define __NR_time (__NR_SYSCALL_BASE+ 13)
|
||||
#define __NR_mknod (__NR_SYSCALL_BASE+ 14)
|
||||
#define __NR_chmod (__NR_SYSCALL_BASE+ 15)
|
||||
#define __NR_lchown (__NR_SYSCALL_BASE+ 16)
|
||||
/* 17 was sys_break */
|
||||
/* 18 was sys_stat */
|
||||
#define __NR_lseek (__NR_SYSCALL_BASE+ 19)
|
||||
#define __NR_getpid (__NR_SYSCALL_BASE+ 20)
|
||||
#define __NR_mount (__NR_SYSCALL_BASE+ 21)
|
||||
#define __NR_umount (__NR_SYSCALL_BASE+ 22)
|
||||
#define __NR_setuid (__NR_SYSCALL_BASE+ 23)
|
||||
#define __NR_getuid (__NR_SYSCALL_BASE+ 24)
|
||||
#define __NR_stime (__NR_SYSCALL_BASE+ 25)
|
||||
#define __NR_ptrace (__NR_SYSCALL_BASE+ 26)
|
||||
#define __NR_alarm (__NR_SYSCALL_BASE+ 27)
|
||||
/* 28 was sys_fstat */
|
||||
#define __NR_pause (__NR_SYSCALL_BASE+ 29)
|
||||
#define __NR_utime (__NR_SYSCALL_BASE+ 30)
|
||||
/* 31 was sys_stty */
|
||||
/* 32 was sys_gtty */
|
||||
#define __NR_access (__NR_SYSCALL_BASE+ 33)
|
||||
#define __NR_nice (__NR_SYSCALL_BASE+ 34)
|
||||
/* 35 was sys_ftime */
|
||||
#define __NR_sync (__NR_SYSCALL_BASE+ 36)
|
||||
#define __NR_kill (__NR_SYSCALL_BASE+ 37)
|
||||
#define __NR_rename (__NR_SYSCALL_BASE+ 38)
|
||||
#define __NR_mkdir (__NR_SYSCALL_BASE+ 39)
|
||||
#define __NR_rmdir (__NR_SYSCALL_BASE+ 40)
|
||||
#define __NR_dup (__NR_SYSCALL_BASE+ 41)
|
||||
#define __NR_pipe (__NR_SYSCALL_BASE+ 42)
|
||||
#define __NR_times (__NR_SYSCALL_BASE+ 43)
|
||||
/* 44 was sys_prof */
|
||||
#define __NR_brk (__NR_SYSCALL_BASE+ 45)
|
||||
#define __NR_setgid (__NR_SYSCALL_BASE+ 46)
|
||||
#define __NR_getgid (__NR_SYSCALL_BASE+ 47)
|
||||
/* 48 was sys_signal */
|
||||
#define __NR_geteuid (__NR_SYSCALL_BASE+ 49)
|
||||
#define __NR_getegid (__NR_SYSCALL_BASE+ 50)
|
||||
#define __NR_acct (__NR_SYSCALL_BASE+ 51)
|
||||
#define __NR_umount2 (__NR_SYSCALL_BASE+ 52)
|
||||
/* 53 was sys_lock */
|
||||
#define __NR_ioctl (__NR_SYSCALL_BASE+ 54)
|
||||
#define __NR_fcntl (__NR_SYSCALL_BASE+ 55)
|
||||
/* 56 was sys_mpx */
|
||||
#define __NR_setpgid (__NR_SYSCALL_BASE+ 57)
|
||||
/* 58 was sys_ulimit */
|
||||
/* 59 was sys_olduname */
|
||||
#define __NR_umask (__NR_SYSCALL_BASE+ 60)
|
||||
#define __NR_chroot (__NR_SYSCALL_BASE+ 61)
|
||||
#define __NR_ustat (__NR_SYSCALL_BASE+ 62)
|
||||
#define __NR_dup2 (__NR_SYSCALL_BASE+ 63)
|
||||
#define __NR_getppid (__NR_SYSCALL_BASE+ 64)
|
||||
#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65)
|
||||
#define __NR_setsid (__NR_SYSCALL_BASE+ 66)
|
||||
#define __NR_sigaction (__NR_SYSCALL_BASE+ 67)
|
||||
/* 68 was sys_sgetmask */
|
||||
/* 69 was sys_ssetmask */
|
||||
#define __NR_setreuid (__NR_SYSCALL_BASE+ 70)
|
||||
#define __NR_setregid (__NR_SYSCALL_BASE+ 71)
|
||||
#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72)
|
||||
#define __NR_sigpending (__NR_SYSCALL_BASE+ 73)
|
||||
#define __NR_sethostname (__NR_SYSCALL_BASE+ 74)
|
||||
#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75)
|
||||
#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
|
||||
#define __NR_getrusage (__NR_SYSCALL_BASE+ 77)
|
||||
#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78)
|
||||
#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79)
|
||||
#define __NR_getgroups (__NR_SYSCALL_BASE+ 80)
|
||||
#define __NR_setgroups (__NR_SYSCALL_BASE+ 81)
|
||||
#define __NR_select (__NR_SYSCALL_BASE+ 82)
|
||||
#define __NR_symlink (__NR_SYSCALL_BASE+ 83)
|
||||
/* 84 was sys_lstat */
|
||||
#define __NR_readlink (__NR_SYSCALL_BASE+ 85)
|
||||
#define __NR_uselib (__NR_SYSCALL_BASE+ 86)
|
||||
#define __NR_swapon (__NR_SYSCALL_BASE+ 87)
|
||||
#define __NR_reboot (__NR_SYSCALL_BASE+ 88)
|
||||
#define __NR_readdir (__NR_SYSCALL_BASE+ 89)
|
||||
#define __NR_mmap (__NR_SYSCALL_BASE+ 90)
|
||||
#define __NR_munmap (__NR_SYSCALL_BASE+ 91)
|
||||
#define __NR_truncate (__NR_SYSCALL_BASE+ 92)
|
||||
#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93)
|
||||
#define __NR_fchmod (__NR_SYSCALL_BASE+ 94)
|
||||
#define __NR_fchown (__NR_SYSCALL_BASE+ 95)
|
||||
#define __NR_getpriority (__NR_SYSCALL_BASE+ 96)
|
||||
#define __NR_setpriority (__NR_SYSCALL_BASE+ 97)
|
||||
/* 98 was sys_profil */
|
||||
#define __NR_statfs (__NR_SYSCALL_BASE+ 99)
|
||||
#define __NR_fstatfs (__NR_SYSCALL_BASE+100)
|
||||
/* 101 was sys_ioperm */
|
||||
#define __NR_socketcall (__NR_SYSCALL_BASE+102)
|
||||
#define __NR_syslog (__NR_SYSCALL_BASE+103)
|
||||
#define __NR_setitimer (__NR_SYSCALL_BASE+104)
|
||||
#define __NR_getitimer (__NR_SYSCALL_BASE+105)
|
||||
#define __NR_stat (__NR_SYSCALL_BASE+106)
|
||||
#define __NR_lstat (__NR_SYSCALL_BASE+107)
|
||||
#define __NR_fstat (__NR_SYSCALL_BASE+108)
|
||||
/* 109 was sys_uname */
|
||||
/* 110 was sys_iopl */
|
||||
#define __NR_vhangup (__NR_SYSCALL_BASE+111)
|
||||
/* 112 was sys_idle */
|
||||
#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
|
||||
#define __NR_wait4 (__NR_SYSCALL_BASE+114)
|
||||
#define __NR_swapoff (__NR_SYSCALL_BASE+115)
|
||||
#define __NR_sysinfo (__NR_SYSCALL_BASE+116)
|
||||
#define __NR_ipc (__NR_SYSCALL_BASE+117)
|
||||
#define __NR_fsync (__NR_SYSCALL_BASE+118)
|
||||
#define __NR_sigreturn (__NR_SYSCALL_BASE+119)
|
||||
#define __NR_clone (__NR_SYSCALL_BASE+120)
|
||||
#define __NR_setdomainname (__NR_SYSCALL_BASE+121)
|
||||
#define __NR_uname (__NR_SYSCALL_BASE+122)
|
||||
/* 123 was sys_modify_ldt */
|
||||
#define __NR_adjtimex (__NR_SYSCALL_BASE+124)
|
||||
#define __NR_mprotect (__NR_SYSCALL_BASE+125)
|
||||
#define __NR_sigprocmask (__NR_SYSCALL_BASE+126)
|
||||
/* 127 was sys_create_module */
|
||||
#define __NR_init_module (__NR_SYSCALL_BASE+128)
|
||||
#define __NR_delete_module (__NR_SYSCALL_BASE+129)
|
||||
/* 130 was sys_get_kernel_syms */
|
||||
#define __NR_quotactl (__NR_SYSCALL_BASE+131)
|
||||
#define __NR_getpgid (__NR_SYSCALL_BASE+132)
|
||||
#define __NR_fchdir (__NR_SYSCALL_BASE+133)
|
||||
#define __NR_bdflush (__NR_SYSCALL_BASE+134)
|
||||
#define __NR_sysfs (__NR_SYSCALL_BASE+135)
|
||||
#define __NR_personality (__NR_SYSCALL_BASE+136)
|
||||
/* 137 was sys_afs_syscall */
|
||||
#define __NR_setfsuid (__NR_SYSCALL_BASE+138)
|
||||
#define __NR_setfsgid (__NR_SYSCALL_BASE+139)
|
||||
#define __NR__llseek (__NR_SYSCALL_BASE+140)
|
||||
#define __NR_getdents (__NR_SYSCALL_BASE+141)
|
||||
#define __NR__newselect (__NR_SYSCALL_BASE+142)
|
||||
#define __NR_flock (__NR_SYSCALL_BASE+143)
|
||||
#define __NR_msync (__NR_SYSCALL_BASE+144)
|
||||
#define __NR_readv (__NR_SYSCALL_BASE+145)
|
||||
#define __NR_writev (__NR_SYSCALL_BASE+146)
|
||||
#define __NR_getsid (__NR_SYSCALL_BASE+147)
|
||||
#define __NR_fdatasync (__NR_SYSCALL_BASE+148)
|
||||
#define __NR__sysctl (__NR_SYSCALL_BASE+149)
|
||||
#define __NR_mlock (__NR_SYSCALL_BASE+150)
|
||||
#define __NR_munlock (__NR_SYSCALL_BASE+151)
|
||||
#define __NR_mlockall (__NR_SYSCALL_BASE+152)
|
||||
#define __NR_munlockall (__NR_SYSCALL_BASE+153)
|
||||
#define __NR_sched_setparam (__NR_SYSCALL_BASE+154)
|
||||
#define __NR_sched_getparam (__NR_SYSCALL_BASE+155)
|
||||
#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156)
|
||||
#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157)
|
||||
#define __NR_sched_yield (__NR_SYSCALL_BASE+158)
|
||||
#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159)
|
||||
#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160)
|
||||
#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161)
|
||||
#define __NR_nanosleep (__NR_SYSCALL_BASE+162)
|
||||
#define __NR_mremap (__NR_SYSCALL_BASE+163)
|
||||
#define __NR_setresuid (__NR_SYSCALL_BASE+164)
|
||||
#define __NR_getresuid (__NR_SYSCALL_BASE+165)
|
||||
/* 166 was sys_vm86 */
|
||||
/* 167 was sys_query_module */
|
||||
#define __NR_poll (__NR_SYSCALL_BASE+168)
|
||||
#define __NR_nfsservctl (__NR_SYSCALL_BASE+169)
|
||||
#define __NR_setresgid (__NR_SYSCALL_BASE+170)
|
||||
#define __NR_getresgid (__NR_SYSCALL_BASE+171)
|
||||
#define __NR_prctl (__NR_SYSCALL_BASE+172)
|
||||
#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173)
|
||||
#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174)
|
||||
#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175)
|
||||
#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176)
|
||||
#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177)
|
||||
#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178)
|
||||
#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179)
|
||||
#define __NR_pread64 (__NR_SYSCALL_BASE+180)
|
||||
#define __NR_pwrite64 (__NR_SYSCALL_BASE+181)
|
||||
#define __NR_chown (__NR_SYSCALL_BASE+182)
|
||||
#define __NR_getcwd (__NR_SYSCALL_BASE+183)
|
||||
#define __NR_capget (__NR_SYSCALL_BASE+184)
|
||||
#define __NR_capset (__NR_SYSCALL_BASE+185)
|
||||
#define __NR_sigaltstack (__NR_SYSCALL_BASE+186)
|
||||
#define __NR_sendfile (__NR_SYSCALL_BASE+187)
|
||||
/* 188 reserved */
|
||||
/* 189 reserved */
|
||||
#define __NR_vfork (__NR_SYSCALL_BASE+190)
|
||||
#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
|
||||
#define __NR_mmap2 (__NR_SYSCALL_BASE+192)
|
||||
#define __NR_truncate64 (__NR_SYSCALL_BASE+193)
|
||||
#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194)
|
||||
#define __NR_stat64 (__NR_SYSCALL_BASE+195)
|
||||
#define __NR_lstat64 (__NR_SYSCALL_BASE+196)
|
||||
#define __NR_fstat64 (__NR_SYSCALL_BASE+197)
|
||||
#define __NR_lchown32 (__NR_SYSCALL_BASE+198)
|
||||
#define __NR_getuid32 (__NR_SYSCALL_BASE+199)
|
||||
#define __NR_getgid32 (__NR_SYSCALL_BASE+200)
|
||||
#define __NR_geteuid32 (__NR_SYSCALL_BASE+201)
|
||||
#define __NR_getegid32 (__NR_SYSCALL_BASE+202)
|
||||
#define __NR_setreuid32 (__NR_SYSCALL_BASE+203)
|
||||
#define __NR_setregid32 (__NR_SYSCALL_BASE+204)
|
||||
#define __NR_getgroups32 (__NR_SYSCALL_BASE+205)
|
||||
#define __NR_setgroups32 (__NR_SYSCALL_BASE+206)
|
||||
#define __NR_fchown32 (__NR_SYSCALL_BASE+207)
|
||||
#define __NR_setresuid32 (__NR_SYSCALL_BASE+208)
|
||||
#define __NR_getresuid32 (__NR_SYSCALL_BASE+209)
|
||||
#define __NR_setresgid32 (__NR_SYSCALL_BASE+210)
|
||||
#define __NR_getresgid32 (__NR_SYSCALL_BASE+211)
|
||||
#define __NR_chown32 (__NR_SYSCALL_BASE+212)
|
||||
#define __NR_setuid32 (__NR_SYSCALL_BASE+213)
|
||||
#define __NR_setgid32 (__NR_SYSCALL_BASE+214)
|
||||
#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215)
|
||||
#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216)
|
||||
#define __NR_getdents64 (__NR_SYSCALL_BASE+217)
|
||||
#define __NR_pivot_root (__NR_SYSCALL_BASE+218)
|
||||
#define __NR_mincore (__NR_SYSCALL_BASE+219)
|
||||
#define __NR_madvise (__NR_SYSCALL_BASE+220)
|
||||
#define __NR_fcntl64 (__NR_SYSCALL_BASE+221)
|
||||
/* 222 for tux */
|
||||
/* 223 is unused */
|
||||
#define __NR_gettid (__NR_SYSCALL_BASE+224)
|
||||
#define __NR_readahead (__NR_SYSCALL_BASE+225)
|
||||
#define __NR_setxattr (__NR_SYSCALL_BASE+226)
|
||||
#define __NR_lsetxattr (__NR_SYSCALL_BASE+227)
|
||||
#define __NR_fsetxattr (__NR_SYSCALL_BASE+228)
|
||||
#define __NR_getxattr (__NR_SYSCALL_BASE+229)
|
||||
#define __NR_lgetxattr (__NR_SYSCALL_BASE+230)
|
||||
#define __NR_fgetxattr (__NR_SYSCALL_BASE+231)
|
||||
#define __NR_listxattr (__NR_SYSCALL_BASE+232)
|
||||
#define __NR_llistxattr (__NR_SYSCALL_BASE+233)
|
||||
#define __NR_flistxattr (__NR_SYSCALL_BASE+234)
|
||||
#define __NR_removexattr (__NR_SYSCALL_BASE+235)
|
||||
#define __NR_lremovexattr (__NR_SYSCALL_BASE+236)
|
||||
#define __NR_fremovexattr (__NR_SYSCALL_BASE+237)
|
||||
#define __NR_tkill (__NR_SYSCALL_BASE+238)
|
||||
#define __NR_sendfile64 (__NR_SYSCALL_BASE+239)
|
||||
#define __NR_futex (__NR_SYSCALL_BASE+240)
|
||||
#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241)
|
||||
#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242)
|
||||
#define __NR_io_setup (__NR_SYSCALL_BASE+243)
|
||||
#define __NR_io_destroy (__NR_SYSCALL_BASE+244)
|
||||
#define __NR_io_getevents (__NR_SYSCALL_BASE+245)
|
||||
#define __NR_io_submit (__NR_SYSCALL_BASE+246)
|
||||
#define __NR_io_cancel (__NR_SYSCALL_BASE+247)
|
||||
#define __NR_exit_group (__NR_SYSCALL_BASE+248)
|
||||
#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249)
|
||||
#define __NR_epoll_create (__NR_SYSCALL_BASE+250)
|
||||
#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251)
|
||||
#define __NR_epoll_wait (__NR_SYSCALL_BASE+252)
|
||||
#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253)
|
||||
/* 254 for set_thread_area */
|
||||
/* 255 for get_thread_area */
|
||||
#define __NR_set_tid_address (__NR_SYSCALL_BASE+256)
|
||||
#define __NR_timer_create (__NR_SYSCALL_BASE+257)
|
||||
#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
|
||||
#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
|
||||
#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
|
||||
#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
|
||||
#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
|
||||
#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
|
||||
#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
|
||||
#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
|
||||
#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
|
||||
#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
|
||||
#define __NR_tgkill (__NR_SYSCALL_BASE+268)
|
||||
#define __NR_utimes (__NR_SYSCALL_BASE+269)
|
||||
#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270)
|
||||
#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271)
|
||||
#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272)
|
||||
#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273)
|
||||
#define __NR_mq_open (__NR_SYSCALL_BASE+274)
|
||||
#define __NR_mq_unlink (__NR_SYSCALL_BASE+275)
|
||||
#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276)
|
||||
#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277)
|
||||
#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
|
||||
#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
|
||||
#define __NR_waitid (__NR_SYSCALL_BASE+280)
|
||||
#define __NR_socket (__NR_SYSCALL_BASE+281)
|
||||
#define __NR_bind (__NR_SYSCALL_BASE+282)
|
||||
#define __NR_connect (__NR_SYSCALL_BASE+283)
|
||||
#define __NR_listen (__NR_SYSCALL_BASE+284)
|
||||
#define __NR_accept (__NR_SYSCALL_BASE+285)
|
||||
#define __NR_getsockname (__NR_SYSCALL_BASE+286)
|
||||
#define __NR_getpeername (__NR_SYSCALL_BASE+287)
|
||||
#define __NR_socketpair (__NR_SYSCALL_BASE+288)
|
||||
#define __NR_send (__NR_SYSCALL_BASE+289)
|
||||
#define __NR_sendto (__NR_SYSCALL_BASE+290)
|
||||
#define __NR_recv (__NR_SYSCALL_BASE+291)
|
||||
#define __NR_recvfrom (__NR_SYSCALL_BASE+292)
|
||||
#define __NR_shutdown (__NR_SYSCALL_BASE+293)
|
||||
#define __NR_setsockopt (__NR_SYSCALL_BASE+294)
|
||||
#define __NR_getsockopt (__NR_SYSCALL_BASE+295)
|
||||
#define __NR_sendmsg (__NR_SYSCALL_BASE+296)
|
||||
#define __NR_recvmsg (__NR_SYSCALL_BASE+297)
|
||||
#define __NR_semop (__NR_SYSCALL_BASE+298)
|
||||
#define __NR_semget (__NR_SYSCALL_BASE+299)
|
||||
#define __NR_semctl (__NR_SYSCALL_BASE+300)
|
||||
#define __NR_msgsnd (__NR_SYSCALL_BASE+301)
|
||||
#define __NR_msgrcv (__NR_SYSCALL_BASE+302)
|
||||
#define __NR_msgget (__NR_SYSCALL_BASE+303)
|
||||
#define __NR_msgctl (__NR_SYSCALL_BASE+304)
|
||||
#define __NR_shmat (__NR_SYSCALL_BASE+305)
|
||||
#define __NR_shmdt (__NR_SYSCALL_BASE+306)
|
||||
#define __NR_shmget (__NR_SYSCALL_BASE+307)
|
||||
#define __NR_shmctl (__NR_SYSCALL_BASE+308)
|
||||
#define __NR_add_key (__NR_SYSCALL_BASE+309)
|
||||
#define __NR_request_key (__NR_SYSCALL_BASE+310)
|
||||
#define __NR_keyctl (__NR_SYSCALL_BASE+311)
|
||||
#define __NR_semtimedop (__NR_SYSCALL_BASE+312)
|
||||
#define __NR_vserver (__NR_SYSCALL_BASE+313)
|
||||
#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
|
||||
#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
|
||||
#define __NR_inotify_init (__NR_SYSCALL_BASE+316)
|
||||
#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317)
|
||||
#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318)
|
||||
#define __NR_mbind (__NR_SYSCALL_BASE+319)
|
||||
#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320)
|
||||
#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321)
|
||||
#define __NR_openat (__NR_SYSCALL_BASE+322)
|
||||
#define __NR_mkdirat (__NR_SYSCALL_BASE+323)
|
||||
#define __NR_mknodat (__NR_SYSCALL_BASE+324)
|
||||
#define __NR_fchownat (__NR_SYSCALL_BASE+325)
|
||||
#define __NR_futimesat (__NR_SYSCALL_BASE+326)
|
||||
#define __NR_fstatat64 (__NR_SYSCALL_BASE+327)
|
||||
#define __NR_unlinkat (__NR_SYSCALL_BASE+328)
|
||||
#define __NR_renameat (__NR_SYSCALL_BASE+329)
|
||||
#define __NR_linkat (__NR_SYSCALL_BASE+330)
|
||||
#define __NR_symlinkat (__NR_SYSCALL_BASE+331)
|
||||
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
|
||||
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
|
||||
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
|
||||
#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
|
||||
#define __NR_ppoll (__NR_SYSCALL_BASE+336)
|
||||
#define __NR_unshare (__NR_SYSCALL_BASE+337)
|
||||
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
|
||||
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
|
||||
#define __NR_splice (__NR_SYSCALL_BASE+340)
|
||||
#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
|
||||
#define __NR_sync_file_range2 __NR_arm_sync_file_range
|
||||
#define __NR_tee (__NR_SYSCALL_BASE+342)
|
||||
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
|
||||
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
|
||||
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
|
||||
#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
|
||||
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
|
||||
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
|
||||
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
|
||||
#define __NR_timerfd_create (__NR_SYSCALL_BASE+350)
|
||||
#define __NR_eventfd (__NR_SYSCALL_BASE+351)
|
||||
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
|
||||
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
|
||||
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
|
||||
#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
|
||||
#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
|
||||
#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
|
||||
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
|
||||
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
|
||||
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
|
||||
#define __NR_preadv (__NR_SYSCALL_BASE+361)
|
||||
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
|
||||
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
|
||||
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
|
||||
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
|
||||
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
|
||||
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
|
||||
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
|
||||
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
|
||||
#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
|
||||
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
|
||||
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
|
||||
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
|
||||
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
|
||||
#define __NR_setns (__NR_SYSCALL_BASE+375)
|
||||
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
|
||||
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
|
||||
/* 378 for kcmp */
|
||||
|
||||
/*
|
||||
* This may need to be greater than __NR_last_syscall+1 in order to
|
||||
* account for the padding in the syscall table
|
||||
*/
|
||||
#ifdef __KERNEL__
|
||||
#define __NR_syscalls (380)
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
/*
|
||||
* The following SWIs are ARM private.
|
||||
*/
|
||||
#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
|
||||
#define __ARM_NR_breakpoint (__ARM_NR_BASE+1)
|
||||
#define __ARM_NR_cacheflush (__ARM_NR_BASE+2)
|
||||
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
|
||||
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
|
||||
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
|
||||
|
||||
/*
|
||||
* *NOTE*: This is a ghost syscall private to the kernel. Only the
|
||||
* __kuser_cmpxchg code in entry-armv.S should be aware of its
|
||||
* existence. Don't ever use this from user code.
|
||||
*/
|
||||
#ifdef __KERNEL__
|
||||
#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* The following syscalls are obsolete and no longer available for EABI.
|
||||
*/
|
||||
#if !defined(__KERNEL__)
|
||||
#if defined(__ARM_EABI__)
|
||||
#undef __NR_time
|
||||
#undef __NR_umount
|
||||
#undef __NR_stime
|
||||
#undef __NR_alarm
|
||||
#undef __NR_utime
|
||||
#undef __NR_getrlimit
|
||||
#undef __NR_select
|
||||
#undef __NR_readdir
|
||||
#undef __NR_mmap
|
||||
#undef __NR_socketcall
|
||||
#undef __NR_syscall
|
||||
#undef __NR_ipc
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#define __ARCH_WANT_STAT64
|
||||
#define __ARCH_WANT_SYS_GETHOSTNAME
|
||||
|
@ -495,5 +58,4 @@
|
|||
#define __IGNORE_migrate_pages
|
||||
#define __IGNORE_kcmp
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
#endif /* __ASM_ARM_UNISTD_H */
|
||||
|
|
|
@ -1,3 +1,19 @@
|
|||
# UAPI Header export list
|
||||
include include/uapi/asm-generic/Kbuild.asm
|
||||
|
||||
header-y += a.out.h
|
||||
header-y += byteorder.h
|
||||
header-y += fcntl.h
|
||||
header-y += hwcap.h
|
||||
header-y += ioctls.h
|
||||
header-y += kvm_para.h
|
||||
header-y += mman.h
|
||||
header-y += posix_types.h
|
||||
header-y += ptrace.h
|
||||
header-y += setup.h
|
||||
header-y += sigcontext.h
|
||||
header-y += signal.h
|
||||
header-y += stat.h
|
||||
header-y += statfs.h
|
||||
header-y += swab.h
|
||||
header-y += unistd.h
|
||||
|
|
29
arch/arm/include/uapi/asm/hwcap.h
Normal file
29
arch/arm/include/uapi/asm/hwcap.h
Normal file
|
@ -0,0 +1,29 @@
|
|||
#ifndef _UAPI__ASMARM_HWCAP_H
|
||||
#define _UAPI__ASMARM_HWCAP_H
|
||||
|
||||
/*
|
||||
* HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
|
||||
*/
|
||||
#define HWCAP_SWP (1 << 0)
|
||||
#define HWCAP_HALF (1 << 1)
|
||||
#define HWCAP_THUMB (1 << 2)
|
||||
#define HWCAP_26BIT (1 << 3) /* Play it safe */
|
||||
#define HWCAP_FAST_MULT (1 << 4)
|
||||
#define HWCAP_FPA (1 << 5)
|
||||
#define HWCAP_VFP (1 << 6)
|
||||
#define HWCAP_EDSP (1 << 7)
|
||||
#define HWCAP_JAVA (1 << 8)
|
||||
#define HWCAP_IWMMXT (1 << 9)
|
||||
#define HWCAP_CRUNCH (1 << 10)
|
||||
#define HWCAP_THUMBEE (1 << 11)
|
||||
#define HWCAP_NEON (1 << 12)
|
||||
#define HWCAP_VFPv3 (1 << 13)
|
||||
#define HWCAP_VFPv3D16 (1 << 14)
|
||||
#define HWCAP_TLS (1 << 15)
|
||||
#define HWCAP_VFPv4 (1 << 16)
|
||||
#define HWCAP_IDIVA (1 << 17)
|
||||
#define HWCAP_IDIVT (1 << 18)
|
||||
#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
|
||||
|
||||
|
||||
#endif /* _UAPI__ASMARM_HWCAP_H */
|
138
arch/arm/include/uapi/asm/ptrace.h
Normal file
138
arch/arm/include/uapi/asm/ptrace.h
Normal file
|
@ -0,0 +1,138 @@
|
|||
/*
|
||||
* arch/arm/include/asm/ptrace.h
|
||||
*
|
||||
* Copyright (C) 1996-2003 Russell King
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#ifndef _UAPI__ASM_ARM_PTRACE_H
|
||||
#define _UAPI__ASM_ARM_PTRACE_H
|
||||
|
||||
#include <asm/hwcap.h>
|
||||
|
||||
#define PTRACE_GETREGS 12
|
||||
#define PTRACE_SETREGS 13
|
||||
#define PTRACE_GETFPREGS 14
|
||||
#define PTRACE_SETFPREGS 15
|
||||
/* PTRACE_ATTACH is 16 */
|
||||
/* PTRACE_DETACH is 17 */
|
||||
#define PTRACE_GETWMMXREGS 18
|
||||
#define PTRACE_SETWMMXREGS 19
|
||||
/* 20 is unused */
|
||||
#define PTRACE_OLDSETOPTIONS 21
|
||||
#define PTRACE_GET_THREAD_AREA 22
|
||||
#define PTRACE_SET_SYSCALL 23
|
||||
/* PTRACE_SYSCALL is 24 */
|
||||
#define PTRACE_GETCRUNCHREGS 25
|
||||
#define PTRACE_SETCRUNCHREGS 26
|
||||
#define PTRACE_GETVFPREGS 27
|
||||
#define PTRACE_SETVFPREGS 28
|
||||
#define PTRACE_GETHBPREGS 29
|
||||
#define PTRACE_SETHBPREGS 30
|
||||
|
||||
/*
|
||||
* PSR bits
|
||||
*/
|
||||
#define USR26_MODE 0x00000000
|
||||
#define FIQ26_MODE 0x00000001
|
||||
#define IRQ26_MODE 0x00000002
|
||||
#define SVC26_MODE 0x00000003
|
||||
#define USR_MODE 0x00000010
|
||||
#define FIQ_MODE 0x00000011
|
||||
#define IRQ_MODE 0x00000012
|
||||
#define SVC_MODE 0x00000013
|
||||
#define ABT_MODE 0x00000017
|
||||
#define HYP_MODE 0x0000001a
|
||||
#define UND_MODE 0x0000001b
|
||||
#define SYSTEM_MODE 0x0000001f
|
||||
#define MODE32_BIT 0x00000010
|
||||
#define MODE_MASK 0x0000001f
|
||||
#define PSR_T_BIT 0x00000020
|
||||
#define PSR_F_BIT 0x00000040
|
||||
#define PSR_I_BIT 0x00000080
|
||||
#define PSR_A_BIT 0x00000100
|
||||
#define PSR_E_BIT 0x00000200
|
||||
#define PSR_J_BIT 0x01000000
|
||||
#define PSR_Q_BIT 0x08000000
|
||||
#define PSR_V_BIT 0x10000000
|
||||
#define PSR_C_BIT 0x20000000
|
||||
#define PSR_Z_BIT 0x40000000
|
||||
#define PSR_N_BIT 0x80000000
|
||||
|
||||
/*
|
||||
* Groups of PSR bits
|
||||
*/
|
||||
#define PSR_f 0xff000000 /* Flags */
|
||||
#define PSR_s 0x00ff0000 /* Status */
|
||||
#define PSR_x 0x0000ff00 /* Extension */
|
||||
#define PSR_c 0x000000ff /* Control */
|
||||
|
||||
/*
|
||||
* ARMv7 groups of PSR bits
|
||||
*/
|
||||
#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */
|
||||
#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
|
||||
#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
|
||||
#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
|
||||
|
||||
/*
|
||||
* Default endianness state
|
||||
*/
|
||||
#ifdef CONFIG_CPU_ENDIAN_BE8
|
||||
#define PSR_ENDSTATE PSR_E_BIT
|
||||
#else
|
||||
#define PSR_ENDSTATE 0
|
||||
#endif
|
||||
|
||||
/*
|
||||
* These are 'magic' values for PTRACE_PEEKUSR that return info about where a
|
||||
* process is located in memory.
|
||||
*/
|
||||
#define PT_TEXT_ADDR 0x10000
|
||||
#define PT_DATA_ADDR 0x10004
|
||||
#define PT_TEXT_END_ADDR 0x10008
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/*
|
||||
* This struct defines the way the registers are stored on the
|
||||
* stack during a system call. Note that sizeof(struct pt_regs)
|
||||
* has to be a multiple of 8.
|
||||
*/
|
||||
#ifndef __KERNEL__
|
||||
struct pt_regs {
|
||||
long uregs[18];
|
||||
};
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#define ARM_cpsr uregs[16]
|
||||
#define ARM_pc uregs[15]
|
||||
#define ARM_lr uregs[14]
|
||||
#define ARM_sp uregs[13]
|
||||
#define ARM_ip uregs[12]
|
||||
#define ARM_fp uregs[11]
|
||||
#define ARM_r10 uregs[10]
|
||||
#define ARM_r9 uregs[9]
|
||||
#define ARM_r8 uregs[8]
|
||||
#define ARM_r7 uregs[7]
|
||||
#define ARM_r6 uregs[6]
|
||||
#define ARM_r5 uregs[5]
|
||||
#define ARM_r4 uregs[4]
|
||||
#define ARM_r3 uregs[3]
|
||||
#define ARM_r2 uregs[2]
|
||||
#define ARM_r1 uregs[1]
|
||||
#define ARM_r0 uregs[0]
|
||||
#define ARM_ORIG_r0 uregs[17]
|
||||
|
||||
/*
|
||||
* The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS
|
||||
* and core dumps.
|
||||
*/
|
||||
#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ )
|
||||
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#endif /* _UAPI__ASM_ARM_PTRACE_H */
|
187
arch/arm/include/uapi/asm/setup.h
Normal file
187
arch/arm/include/uapi/asm/setup.h
Normal file
|
@ -0,0 +1,187 @@
|
|||
/*
|
||||
* linux/include/asm/setup.h
|
||||
*
|
||||
* Copyright (C) 1997-1999 Russell King
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Structure passed to kernel to tell it about the
|
||||
* hardware it's running on. See Documentation/arm/Setup
|
||||
* for more info.
|
||||
*/
|
||||
#ifndef _UAPI__ASMARM_SETUP_H
|
||||
#define _UAPI__ASMARM_SETUP_H
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
#define COMMAND_LINE_SIZE 1024
|
||||
|
||||
/* The list ends with an ATAG_NONE node. */
|
||||
#define ATAG_NONE 0x00000000
|
||||
|
||||
struct tag_header {
|
||||
__u32 size;
|
||||
__u32 tag;
|
||||
};
|
||||
|
||||
/* The list must start with an ATAG_CORE node */
|
||||
#define ATAG_CORE 0x54410001
|
||||
|
||||
struct tag_core {
|
||||
__u32 flags; /* bit 0 = read-only */
|
||||
__u32 pagesize;
|
||||
__u32 rootdev;
|
||||
};
|
||||
|
||||
/* it is allowed to have multiple ATAG_MEM nodes */
|
||||
#define ATAG_MEM 0x54410002
|
||||
|
||||
struct tag_mem32 {
|
||||
__u32 size;
|
||||
__u32 start; /* physical start address */
|
||||
};
|
||||
|
||||
/* VGA text type displays */
|
||||
#define ATAG_VIDEOTEXT 0x54410003
|
||||
|
||||
struct tag_videotext {
|
||||
__u8 x;
|
||||
__u8 y;
|
||||
__u16 video_page;
|
||||
__u8 video_mode;
|
||||
__u8 video_cols;
|
||||
__u16 video_ega_bx;
|
||||
__u8 video_lines;
|
||||
__u8 video_isvga;
|
||||
__u16 video_points;
|
||||
};
|
||||
|
||||
/* describes how the ramdisk will be used in kernel */
|
||||
#define ATAG_RAMDISK 0x54410004
|
||||
|
||||
struct tag_ramdisk {
|
||||
__u32 flags; /* bit 0 = load, bit 1 = prompt */
|
||||
__u32 size; /* decompressed ramdisk size in _kilo_ bytes */
|
||||
__u32 start; /* starting block of floppy-based RAM disk image */
|
||||
};
|
||||
|
||||
/* describes where the compressed ramdisk image lives (virtual address) */
|
||||
/*
|
||||
* this one accidentally used virtual addresses - as such,
|
||||
* it's deprecated.
|
||||
*/
|
||||
#define ATAG_INITRD 0x54410005
|
||||
|
||||
/* describes where the compressed ramdisk image lives (physical address) */
|
||||
#define ATAG_INITRD2 0x54420005
|
||||
|
||||
struct tag_initrd {
|
||||
__u32 start; /* physical start address */
|
||||
__u32 size; /* size of compressed ramdisk image in bytes */
|
||||
};
|
||||
|
||||
/* board serial number. "64 bits should be enough for everybody" */
|
||||
#define ATAG_SERIAL 0x54410006
|
||||
|
||||
struct tag_serialnr {
|
||||
__u32 low;
|
||||
__u32 high;
|
||||
};
|
||||
|
||||
/* board revision */
|
||||
#define ATAG_REVISION 0x54410007
|
||||
|
||||
struct tag_revision {
|
||||
__u32 rev;
|
||||
};
|
||||
|
||||
/* initial values for vesafb-type framebuffers. see struct screen_info
|
||||
* in include/linux/tty.h
|
||||
*/
|
||||
#define ATAG_VIDEOLFB 0x54410008
|
||||
|
||||
struct tag_videolfb {
|
||||
__u16 lfb_width;
|
||||
__u16 lfb_height;
|
||||
__u16 lfb_depth;
|
||||
__u16 lfb_linelength;
|
||||
__u32 lfb_base;
|
||||
__u32 lfb_size;
|
||||
__u8 red_size;
|
||||
__u8 red_pos;
|
||||
__u8 green_size;
|
||||
__u8 green_pos;
|
||||
__u8 blue_size;
|
||||
__u8 blue_pos;
|
||||
__u8 rsvd_size;
|
||||
__u8 rsvd_pos;
|
||||
};
|
||||
|
||||
/* command line: \0 terminated string */
|
||||
#define ATAG_CMDLINE 0x54410009
|
||||
|
||||
struct tag_cmdline {
|
||||
char cmdline[1]; /* this is the minimum size */
|
||||
};
|
||||
|
||||
/* acorn RiscPC specific information */
|
||||
#define ATAG_ACORN 0x41000101
|
||||
|
||||
struct tag_acorn {
|
||||
__u32 memc_control_reg;
|
||||
__u32 vram_pages;
|
||||
__u8 sounddefault;
|
||||
__u8 adfsdrives;
|
||||
};
|
||||
|
||||
/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
|
||||
#define ATAG_MEMCLK 0x41000402
|
||||
|
||||
struct tag_memclk {
|
||||
__u32 fmemclk;
|
||||
};
|
||||
|
||||
struct tag {
|
||||
struct tag_header hdr;
|
||||
union {
|
||||
struct tag_core core;
|
||||
struct tag_mem32 mem;
|
||||
struct tag_videotext videotext;
|
||||
struct tag_ramdisk ramdisk;
|
||||
struct tag_initrd initrd;
|
||||
struct tag_serialnr serialnr;
|
||||
struct tag_revision revision;
|
||||
struct tag_videolfb videolfb;
|
||||
struct tag_cmdline cmdline;
|
||||
|
||||
/*
|
||||
* Acorn specific
|
||||
*/
|
||||
struct tag_acorn acorn;
|
||||
|
||||
/*
|
||||
* DC21285 specific
|
||||
*/
|
||||
struct tag_memclk memclk;
|
||||
} u;
|
||||
};
|
||||
|
||||
struct tagtable {
|
||||
__u32 tag;
|
||||
int (*parse)(const struct tag *);
|
||||
};
|
||||
|
||||
#define tag_member_present(tag,member) \
|
||||
((unsigned long)(&((struct tag *)0L)->member + 1) \
|
||||
<= (tag)->hdr.size * 4)
|
||||
|
||||
#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size))
|
||||
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
|
||||
|
||||
#define for_each_tag(t,base) \
|
||||
for (t = base; t->hdr.size; t = tag_next(t))
|
||||
|
||||
|
||||
#endif /* _UAPI__ASMARM_SETUP_H */
|
127
arch/arm/include/uapi/asm/signal.h
Normal file
127
arch/arm/include/uapi/asm/signal.h
Normal file
|
@ -0,0 +1,127 @@
|
|||
#ifndef _UAPI_ASMARM_SIGNAL_H
|
||||
#define _UAPI_ASMARM_SIGNAL_H
|
||||
|
||||
#include <linux/types.h>
|
||||
|
||||
/* Avoid too many header ordering problems. */
|
||||
struct siginfo;
|
||||
|
||||
#ifndef __KERNEL__
|
||||
/* Here we must cater to libcs that poke about in kernel headers. */
|
||||
|
||||
#define NSIG 32
|
||||
typedef unsigned long sigset_t;
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#define SIGHUP 1
|
||||
#define SIGINT 2
|
||||
#define SIGQUIT 3
|
||||
#define SIGILL 4
|
||||
#define SIGTRAP 5
|
||||
#define SIGABRT 6
|
||||
#define SIGIOT 6
|
||||
#define SIGBUS 7
|
||||
#define SIGFPE 8
|
||||
#define SIGKILL 9
|
||||
#define SIGUSR1 10
|
||||
#define SIGSEGV 11
|
||||
#define SIGUSR2 12
|
||||
#define SIGPIPE 13
|
||||
#define SIGALRM 14
|
||||
#define SIGTERM 15
|
||||
#define SIGSTKFLT 16
|
||||
#define SIGCHLD 17
|
||||
#define SIGCONT 18
|
||||
#define SIGSTOP 19
|
||||
#define SIGTSTP 20
|
||||
#define SIGTTIN 21
|
||||
#define SIGTTOU 22
|
||||
#define SIGURG 23
|
||||
#define SIGXCPU 24
|
||||
#define SIGXFSZ 25
|
||||
#define SIGVTALRM 26
|
||||
#define SIGPROF 27
|
||||
#define SIGWINCH 28
|
||||
#define SIGIO 29
|
||||
#define SIGPOLL SIGIO
|
||||
/*
|
||||
#define SIGLOST 29
|
||||
*/
|
||||
#define SIGPWR 30
|
||||
#define SIGSYS 31
|
||||
#define SIGUNUSED 31
|
||||
|
||||
/* These should not be considered constants from userland. */
|
||||
#define SIGRTMIN 32
|
||||
#define SIGRTMAX _NSIG
|
||||
|
||||
#define SIGSWI 32
|
||||
|
||||
/*
|
||||
* SA_FLAGS values:
|
||||
*
|
||||
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
|
||||
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
|
||||
* SA_SIGINFO deliver the signal with SIGINFO structs
|
||||
* SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task
|
||||
* is running in 26-bit.
|
||||
* SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)).
|
||||
* SA_RESTART flag to get restarting signals (which were the default long ago)
|
||||
* SA_NODEFER prevents the current signal from being masked in the handler.
|
||||
* SA_RESETHAND clears the handler when the signal is delivered.
|
||||
*
|
||||
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
|
||||
* Unix names RESETHAND and NODEFER respectively.
|
||||
*/
|
||||
#define SA_NOCLDSTOP 0x00000001
|
||||
#define SA_NOCLDWAIT 0x00000002
|
||||
#define SA_SIGINFO 0x00000004
|
||||
#define SA_THIRTYTWO 0x02000000
|
||||
#define SA_RESTORER 0x04000000
|
||||
#define SA_ONSTACK 0x08000000
|
||||
#define SA_RESTART 0x10000000
|
||||
#define SA_NODEFER 0x40000000
|
||||
#define SA_RESETHAND 0x80000000
|
||||
|
||||
#define SA_NOMASK SA_NODEFER
|
||||
#define SA_ONESHOT SA_RESETHAND
|
||||
|
||||
|
||||
/*
|
||||
* sigaltstack controls
|
||||
*/
|
||||
#define SS_ONSTACK 1
|
||||
#define SS_DISABLE 2
|
||||
|
||||
#define MINSIGSTKSZ 2048
|
||||
#define SIGSTKSZ 8192
|
||||
|
||||
#include <asm-generic/signal-defs.h>
|
||||
|
||||
#ifndef __KERNEL__
|
||||
/* Here we must cater to libcs that poke about in kernel headers. */
|
||||
|
||||
struct sigaction {
|
||||
union {
|
||||
__sighandler_t _sa_handler;
|
||||
void (*_sa_sigaction)(int, struct siginfo *, void *);
|
||||
} _u;
|
||||
sigset_t sa_mask;
|
||||
unsigned long sa_flags;
|
||||
void (*sa_restorer)(void);
|
||||
};
|
||||
|
||||
#define sa_handler _u._sa_handler
|
||||
#define sa_sigaction _u._sa_sigaction
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
typedef struct sigaltstack {
|
||||
void __user *ss_sp;
|
||||
int ss_flags;
|
||||
size_t ss_size;
|
||||
} stack_t;
|
||||
|
||||
|
||||
#endif /* _UAPI_ASMARM_SIGNAL_H */
|
53
arch/arm/include/uapi/asm/swab.h
Normal file
53
arch/arm/include/uapi/asm/swab.h
Normal file
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* arch/arm/include/asm/byteorder.h
|
||||
*
|
||||
* ARM Endian-ness. In little endian mode, the data bus is connected such
|
||||
* that byte accesses appear as:
|
||||
* 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
|
||||
* and word accesses (data or instruction) appear as:
|
||||
* d0...d31
|
||||
*
|
||||
* When in big endian mode, byte accesses appear as:
|
||||
* 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
|
||||
* and word accesses (data or instruction) appear as:
|
||||
* d0...d31
|
||||
*/
|
||||
#ifndef _UAPI__ASM_ARM_SWAB_H
|
||||
#define _UAPI__ASM_ARM_SWAB_H
|
||||
|
||||
#include <linux/compiler.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
|
||||
# define __SWAB_64_THRU_32__
|
||||
#endif
|
||||
|
||||
|
||||
#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6
|
||||
static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
|
||||
{
|
||||
__u32 t;
|
||||
|
||||
#ifndef __thumb__
|
||||
if (!__builtin_constant_p(x)) {
|
||||
/*
|
||||
* The compiler needs a bit of a hint here to always do the
|
||||
* right thing and not screw it up to different degrees
|
||||
* depending on the gcc version.
|
||||
*/
|
||||
asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
|
||||
} else
|
||||
#endif
|
||||
t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
|
||||
|
||||
x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */
|
||||
t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */
|
||||
x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */
|
||||
|
||||
return x;
|
||||
}
|
||||
#define __arch_swab32 __arch_swab32
|
||||
|
||||
#endif
|
||||
|
||||
#endif /* _UAPI__ASM_ARM_SWAB_H */
|
450
arch/arm/include/uapi/asm/unistd.h
Normal file
450
arch/arm/include/uapi/asm/unistd.h
Normal file
|
@ -0,0 +1,450 @@
|
|||
/*
|
||||
* arch/arm/include/asm/unistd.h
|
||||
*
|
||||
* Copyright (C) 2001-2005 Russell King
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
|
||||
* no matter what the change is. Thanks!
|
||||
*/
|
||||
#ifndef _UAPI__ASM_ARM_UNISTD_H
|
||||
#define _UAPI__ASM_ARM_UNISTD_H
|
||||
|
||||
#define __NR_OABI_SYSCALL_BASE 0x900000
|
||||
|
||||
#if defined(__thumb__) || defined(__ARM_EABI__)
|
||||
#define __NR_SYSCALL_BASE 0
|
||||
#else
|
||||
#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE
|
||||
#endif
|
||||
|
||||
/*
|
||||
* This file contains the system call numbers.
|
||||
*/
|
||||
|
||||
#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0)
|
||||
#define __NR_exit (__NR_SYSCALL_BASE+ 1)
|
||||
#define __NR_fork (__NR_SYSCALL_BASE+ 2)
|
||||
#define __NR_read (__NR_SYSCALL_BASE+ 3)
|
||||
#define __NR_write (__NR_SYSCALL_BASE+ 4)
|
||||
#define __NR_open (__NR_SYSCALL_BASE+ 5)
|
||||
#define __NR_close (__NR_SYSCALL_BASE+ 6)
|
||||
/* 7 was sys_waitpid */
|
||||
#define __NR_creat (__NR_SYSCALL_BASE+ 8)
|
||||
#define __NR_link (__NR_SYSCALL_BASE+ 9)
|
||||
#define __NR_unlink (__NR_SYSCALL_BASE+ 10)
|
||||
#define __NR_execve (__NR_SYSCALL_BASE+ 11)
|
||||
#define __NR_chdir (__NR_SYSCALL_BASE+ 12)
|
||||
#define __NR_time (__NR_SYSCALL_BASE+ 13)
|
||||
#define __NR_mknod (__NR_SYSCALL_BASE+ 14)
|
||||
#define __NR_chmod (__NR_SYSCALL_BASE+ 15)
|
||||
#define __NR_lchown (__NR_SYSCALL_BASE+ 16)
|
||||
/* 17 was sys_break */
|
||||
/* 18 was sys_stat */
|
||||
#define __NR_lseek (__NR_SYSCALL_BASE+ 19)
|
||||
#define __NR_getpid (__NR_SYSCALL_BASE+ 20)
|
||||
#define __NR_mount (__NR_SYSCALL_BASE+ 21)
|
||||
#define __NR_umount (__NR_SYSCALL_BASE+ 22)
|
||||
#define __NR_setuid (__NR_SYSCALL_BASE+ 23)
|
||||
#define __NR_getuid (__NR_SYSCALL_BASE+ 24)
|
||||
#define __NR_stime (__NR_SYSCALL_BASE+ 25)
|
||||
#define __NR_ptrace (__NR_SYSCALL_BASE+ 26)
|
||||
#define __NR_alarm (__NR_SYSCALL_BASE+ 27)
|
||||
/* 28 was sys_fstat */
|
||||
#define __NR_pause (__NR_SYSCALL_BASE+ 29)
|
||||
#define __NR_utime (__NR_SYSCALL_BASE+ 30)
|
||||
/* 31 was sys_stty */
|
||||
/* 32 was sys_gtty */
|
||||
#define __NR_access (__NR_SYSCALL_BASE+ 33)
|
||||
#define __NR_nice (__NR_SYSCALL_BASE+ 34)
|
||||
/* 35 was sys_ftime */
|
||||
#define __NR_sync (__NR_SYSCALL_BASE+ 36)
|
||||
#define __NR_kill (__NR_SYSCALL_BASE+ 37)
|
||||
#define __NR_rename (__NR_SYSCALL_BASE+ 38)
|
||||
#define __NR_mkdir (__NR_SYSCALL_BASE+ 39)
|
||||
#define __NR_rmdir (__NR_SYSCALL_BASE+ 40)
|
||||
#define __NR_dup (__NR_SYSCALL_BASE+ 41)
|
||||
#define __NR_pipe (__NR_SYSCALL_BASE+ 42)
|
||||
#define __NR_times (__NR_SYSCALL_BASE+ 43)
|
||||
/* 44 was sys_prof */
|
||||
#define __NR_brk (__NR_SYSCALL_BASE+ 45)
|
||||
#define __NR_setgid (__NR_SYSCALL_BASE+ 46)
|
||||
#define __NR_getgid (__NR_SYSCALL_BASE+ 47)
|
||||
/* 48 was sys_signal */
|
||||
#define __NR_geteuid (__NR_SYSCALL_BASE+ 49)
|
||||
#define __NR_getegid (__NR_SYSCALL_BASE+ 50)
|
||||
#define __NR_acct (__NR_SYSCALL_BASE+ 51)
|
||||
#define __NR_umount2 (__NR_SYSCALL_BASE+ 52)
|
||||
/* 53 was sys_lock */
|
||||
#define __NR_ioctl (__NR_SYSCALL_BASE+ 54)
|
||||
#define __NR_fcntl (__NR_SYSCALL_BASE+ 55)
|
||||
/* 56 was sys_mpx */
|
||||
#define __NR_setpgid (__NR_SYSCALL_BASE+ 57)
|
||||
/* 58 was sys_ulimit */
|
||||
/* 59 was sys_olduname */
|
||||
#define __NR_umask (__NR_SYSCALL_BASE+ 60)
|
||||
#define __NR_chroot (__NR_SYSCALL_BASE+ 61)
|
||||
#define __NR_ustat (__NR_SYSCALL_BASE+ 62)
|
||||
#define __NR_dup2 (__NR_SYSCALL_BASE+ 63)
|
||||
#define __NR_getppid (__NR_SYSCALL_BASE+ 64)
|
||||
#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65)
|
||||
#define __NR_setsid (__NR_SYSCALL_BASE+ 66)
|
||||
#define __NR_sigaction (__NR_SYSCALL_BASE+ 67)
|
||||
/* 68 was sys_sgetmask */
|
||||
/* 69 was sys_ssetmask */
|
||||
#define __NR_setreuid (__NR_SYSCALL_BASE+ 70)
|
||||
#define __NR_setregid (__NR_SYSCALL_BASE+ 71)
|
||||
#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72)
|
||||
#define __NR_sigpending (__NR_SYSCALL_BASE+ 73)
|
||||
#define __NR_sethostname (__NR_SYSCALL_BASE+ 74)
|
||||
#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75)
|
||||
#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */
|
||||
#define __NR_getrusage (__NR_SYSCALL_BASE+ 77)
|
||||
#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78)
|
||||
#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79)
|
||||
#define __NR_getgroups (__NR_SYSCALL_BASE+ 80)
|
||||
#define __NR_setgroups (__NR_SYSCALL_BASE+ 81)
|
||||
#define __NR_select (__NR_SYSCALL_BASE+ 82)
|
||||
#define __NR_symlink (__NR_SYSCALL_BASE+ 83)
|
||||
/* 84 was sys_lstat */
|
||||
#define __NR_readlink (__NR_SYSCALL_BASE+ 85)
|
||||
#define __NR_uselib (__NR_SYSCALL_BASE+ 86)
|
||||
#define __NR_swapon (__NR_SYSCALL_BASE+ 87)
|
||||
#define __NR_reboot (__NR_SYSCALL_BASE+ 88)
|
||||
#define __NR_readdir (__NR_SYSCALL_BASE+ 89)
|
||||
#define __NR_mmap (__NR_SYSCALL_BASE+ 90)
|
||||
#define __NR_munmap (__NR_SYSCALL_BASE+ 91)
|
||||
#define __NR_truncate (__NR_SYSCALL_BASE+ 92)
|
||||
#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93)
|
||||
#define __NR_fchmod (__NR_SYSCALL_BASE+ 94)
|
||||
#define __NR_fchown (__NR_SYSCALL_BASE+ 95)
|
||||
#define __NR_getpriority (__NR_SYSCALL_BASE+ 96)
|
||||
#define __NR_setpriority (__NR_SYSCALL_BASE+ 97)
|
||||
/* 98 was sys_profil */
|
||||
#define __NR_statfs (__NR_SYSCALL_BASE+ 99)
|
||||
#define __NR_fstatfs (__NR_SYSCALL_BASE+100)
|
||||
/* 101 was sys_ioperm */
|
||||
#define __NR_socketcall (__NR_SYSCALL_BASE+102)
|
||||
#define __NR_syslog (__NR_SYSCALL_BASE+103)
|
||||
#define __NR_setitimer (__NR_SYSCALL_BASE+104)
|
||||
#define __NR_getitimer (__NR_SYSCALL_BASE+105)
|
||||
#define __NR_stat (__NR_SYSCALL_BASE+106)
|
||||
#define __NR_lstat (__NR_SYSCALL_BASE+107)
|
||||
#define __NR_fstat (__NR_SYSCALL_BASE+108)
|
||||
/* 109 was sys_uname */
|
||||
/* 110 was sys_iopl */
|
||||
#define __NR_vhangup (__NR_SYSCALL_BASE+111)
|
||||
/* 112 was sys_idle */
|
||||
#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
|
||||
#define __NR_wait4 (__NR_SYSCALL_BASE+114)
|
||||
#define __NR_swapoff (__NR_SYSCALL_BASE+115)
|
||||
#define __NR_sysinfo (__NR_SYSCALL_BASE+116)
|
||||
#define __NR_ipc (__NR_SYSCALL_BASE+117)
|
||||
#define __NR_fsync (__NR_SYSCALL_BASE+118)
|
||||
#define __NR_sigreturn (__NR_SYSCALL_BASE+119)
|
||||
#define __NR_clone (__NR_SYSCALL_BASE+120)
|
||||
#define __NR_setdomainname (__NR_SYSCALL_BASE+121)
|
||||
#define __NR_uname (__NR_SYSCALL_BASE+122)
|
||||
/* 123 was sys_modify_ldt */
|
||||
#define __NR_adjtimex (__NR_SYSCALL_BASE+124)
|
||||
#define __NR_mprotect (__NR_SYSCALL_BASE+125)
|
||||
#define __NR_sigprocmask (__NR_SYSCALL_BASE+126)
|
||||
/* 127 was sys_create_module */
|
||||
#define __NR_init_module (__NR_SYSCALL_BASE+128)
|
||||
#define __NR_delete_module (__NR_SYSCALL_BASE+129)
|
||||
/* 130 was sys_get_kernel_syms */
|
||||
#define __NR_quotactl (__NR_SYSCALL_BASE+131)
|
||||
#define __NR_getpgid (__NR_SYSCALL_BASE+132)
|
||||
#define __NR_fchdir (__NR_SYSCALL_BASE+133)
|
||||
#define __NR_bdflush (__NR_SYSCALL_BASE+134)
|
||||
#define __NR_sysfs (__NR_SYSCALL_BASE+135)
|
||||
#define __NR_personality (__NR_SYSCALL_BASE+136)
|
||||
/* 137 was sys_afs_syscall */
|
||||
#define __NR_setfsuid (__NR_SYSCALL_BASE+138)
|
||||
#define __NR_setfsgid (__NR_SYSCALL_BASE+139)
|
||||
#define __NR__llseek (__NR_SYSCALL_BASE+140)
|
||||
#define __NR_getdents (__NR_SYSCALL_BASE+141)
|
||||
#define __NR__newselect (__NR_SYSCALL_BASE+142)
|
||||
#define __NR_flock (__NR_SYSCALL_BASE+143)
|
||||
#define __NR_msync (__NR_SYSCALL_BASE+144)
|
||||
#define __NR_readv (__NR_SYSCALL_BASE+145)
|
||||
#define __NR_writev (__NR_SYSCALL_BASE+146)
|
||||
#define __NR_getsid (__NR_SYSCALL_BASE+147)
|
||||
#define __NR_fdatasync (__NR_SYSCALL_BASE+148)
|
||||
#define __NR__sysctl (__NR_SYSCALL_BASE+149)
|
||||
#define __NR_mlock (__NR_SYSCALL_BASE+150)
|
||||
#define __NR_munlock (__NR_SYSCALL_BASE+151)
|
||||
#define __NR_mlockall (__NR_SYSCALL_BASE+152)
|
||||
#define __NR_munlockall (__NR_SYSCALL_BASE+153)
|
||||
#define __NR_sched_setparam (__NR_SYSCALL_BASE+154)
|
||||
#define __NR_sched_getparam (__NR_SYSCALL_BASE+155)
|
||||
#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156)
|
||||
#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157)
|
||||
#define __NR_sched_yield (__NR_SYSCALL_BASE+158)
|
||||
#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159)
|
||||
#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160)
|
||||
#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161)
|
||||
#define __NR_nanosleep (__NR_SYSCALL_BASE+162)
|
||||
#define __NR_mremap (__NR_SYSCALL_BASE+163)
|
||||
#define __NR_setresuid (__NR_SYSCALL_BASE+164)
|
||||
#define __NR_getresuid (__NR_SYSCALL_BASE+165)
|
||||
/* 166 was sys_vm86 */
|
||||
/* 167 was sys_query_module */
|
||||
#define __NR_poll (__NR_SYSCALL_BASE+168)
|
||||
#define __NR_nfsservctl (__NR_SYSCALL_BASE+169)
|
||||
#define __NR_setresgid (__NR_SYSCALL_BASE+170)
|
||||
#define __NR_getresgid (__NR_SYSCALL_BASE+171)
|
||||
#define __NR_prctl (__NR_SYSCALL_BASE+172)
|
||||
#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173)
|
||||
#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174)
|
||||
#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175)
|
||||
#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176)
|
||||
#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177)
|
||||
#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178)
|
||||
#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179)
|
||||
#define __NR_pread64 (__NR_SYSCALL_BASE+180)
|
||||
#define __NR_pwrite64 (__NR_SYSCALL_BASE+181)
|
||||
#define __NR_chown (__NR_SYSCALL_BASE+182)
|
||||
#define __NR_getcwd (__NR_SYSCALL_BASE+183)
|
||||
#define __NR_capget (__NR_SYSCALL_BASE+184)
|
||||
#define __NR_capset (__NR_SYSCALL_BASE+185)
|
||||
#define __NR_sigaltstack (__NR_SYSCALL_BASE+186)
|
||||
#define __NR_sendfile (__NR_SYSCALL_BASE+187)
|
||||
/* 188 reserved */
|
||||
/* 189 reserved */
|
||||
#define __NR_vfork (__NR_SYSCALL_BASE+190)
|
||||
#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */
|
||||
#define __NR_mmap2 (__NR_SYSCALL_BASE+192)
|
||||
#define __NR_truncate64 (__NR_SYSCALL_BASE+193)
|
||||
#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194)
|
||||
#define __NR_stat64 (__NR_SYSCALL_BASE+195)
|
||||
#define __NR_lstat64 (__NR_SYSCALL_BASE+196)
|
||||
#define __NR_fstat64 (__NR_SYSCALL_BASE+197)
|
||||
#define __NR_lchown32 (__NR_SYSCALL_BASE+198)
|
||||
#define __NR_getuid32 (__NR_SYSCALL_BASE+199)
|
||||
#define __NR_getgid32 (__NR_SYSCALL_BASE+200)
|
||||
#define __NR_geteuid32 (__NR_SYSCALL_BASE+201)
|
||||
#define __NR_getegid32 (__NR_SYSCALL_BASE+202)
|
||||
#define __NR_setreuid32 (__NR_SYSCALL_BASE+203)
|
||||
#define __NR_setregid32 (__NR_SYSCALL_BASE+204)
|
||||
#define __NR_getgroups32 (__NR_SYSCALL_BASE+205)
|
||||
#define __NR_setgroups32 (__NR_SYSCALL_BASE+206)
|
||||
#define __NR_fchown32 (__NR_SYSCALL_BASE+207)
|
||||
#define __NR_setresuid32 (__NR_SYSCALL_BASE+208)
|
||||
#define __NR_getresuid32 (__NR_SYSCALL_BASE+209)
|
||||
#define __NR_setresgid32 (__NR_SYSCALL_BASE+210)
|
||||
#define __NR_getresgid32 (__NR_SYSCALL_BASE+211)
|
||||
#define __NR_chown32 (__NR_SYSCALL_BASE+212)
|
||||
#define __NR_setuid32 (__NR_SYSCALL_BASE+213)
|
||||
#define __NR_setgid32 (__NR_SYSCALL_BASE+214)
|
||||
#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215)
|
||||
#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216)
|
||||
#define __NR_getdents64 (__NR_SYSCALL_BASE+217)
|
||||
#define __NR_pivot_root (__NR_SYSCALL_BASE+218)
|
||||
#define __NR_mincore (__NR_SYSCALL_BASE+219)
|
||||
#define __NR_madvise (__NR_SYSCALL_BASE+220)
|
||||
#define __NR_fcntl64 (__NR_SYSCALL_BASE+221)
|
||||
/* 222 for tux */
|
||||
/* 223 is unused */
|
||||
#define __NR_gettid (__NR_SYSCALL_BASE+224)
|
||||
#define __NR_readahead (__NR_SYSCALL_BASE+225)
|
||||
#define __NR_setxattr (__NR_SYSCALL_BASE+226)
|
||||
#define __NR_lsetxattr (__NR_SYSCALL_BASE+227)
|
||||
#define __NR_fsetxattr (__NR_SYSCALL_BASE+228)
|
||||
#define __NR_getxattr (__NR_SYSCALL_BASE+229)
|
||||
#define __NR_lgetxattr (__NR_SYSCALL_BASE+230)
|
||||
#define __NR_fgetxattr (__NR_SYSCALL_BASE+231)
|
||||
#define __NR_listxattr (__NR_SYSCALL_BASE+232)
|
||||
#define __NR_llistxattr (__NR_SYSCALL_BASE+233)
|
||||
#define __NR_flistxattr (__NR_SYSCALL_BASE+234)
|
||||
#define __NR_removexattr (__NR_SYSCALL_BASE+235)
|
||||
#define __NR_lremovexattr (__NR_SYSCALL_BASE+236)
|
||||
#define __NR_fremovexattr (__NR_SYSCALL_BASE+237)
|
||||
#define __NR_tkill (__NR_SYSCALL_BASE+238)
|
||||
#define __NR_sendfile64 (__NR_SYSCALL_BASE+239)
|
||||
#define __NR_futex (__NR_SYSCALL_BASE+240)
|
||||
#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241)
|
||||
#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242)
|
||||
#define __NR_io_setup (__NR_SYSCALL_BASE+243)
|
||||
#define __NR_io_destroy (__NR_SYSCALL_BASE+244)
|
||||
#define __NR_io_getevents (__NR_SYSCALL_BASE+245)
|
||||
#define __NR_io_submit (__NR_SYSCALL_BASE+246)
|
||||
#define __NR_io_cancel (__NR_SYSCALL_BASE+247)
|
||||
#define __NR_exit_group (__NR_SYSCALL_BASE+248)
|
||||
#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249)
|
||||
#define __NR_epoll_create (__NR_SYSCALL_BASE+250)
|
||||
#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251)
|
||||
#define __NR_epoll_wait (__NR_SYSCALL_BASE+252)
|
||||
#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253)
|
||||
/* 254 for set_thread_area */
|
||||
/* 255 for get_thread_area */
|
||||
#define __NR_set_tid_address (__NR_SYSCALL_BASE+256)
|
||||
#define __NR_timer_create (__NR_SYSCALL_BASE+257)
|
||||
#define __NR_timer_settime (__NR_SYSCALL_BASE+258)
|
||||
#define __NR_timer_gettime (__NR_SYSCALL_BASE+259)
|
||||
#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260)
|
||||
#define __NR_timer_delete (__NR_SYSCALL_BASE+261)
|
||||
#define __NR_clock_settime (__NR_SYSCALL_BASE+262)
|
||||
#define __NR_clock_gettime (__NR_SYSCALL_BASE+263)
|
||||
#define __NR_clock_getres (__NR_SYSCALL_BASE+264)
|
||||
#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265)
|
||||
#define __NR_statfs64 (__NR_SYSCALL_BASE+266)
|
||||
#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267)
|
||||
#define __NR_tgkill (__NR_SYSCALL_BASE+268)
|
||||
#define __NR_utimes (__NR_SYSCALL_BASE+269)
|
||||
#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270)
|
||||
#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271)
|
||||
#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272)
|
||||
#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273)
|
||||
#define __NR_mq_open (__NR_SYSCALL_BASE+274)
|
||||
#define __NR_mq_unlink (__NR_SYSCALL_BASE+275)
|
||||
#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276)
|
||||
#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277)
|
||||
#define __NR_mq_notify (__NR_SYSCALL_BASE+278)
|
||||
#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279)
|
||||
#define __NR_waitid (__NR_SYSCALL_BASE+280)
|
||||
#define __NR_socket (__NR_SYSCALL_BASE+281)
|
||||
#define __NR_bind (__NR_SYSCALL_BASE+282)
|
||||
#define __NR_connect (__NR_SYSCALL_BASE+283)
|
||||
#define __NR_listen (__NR_SYSCALL_BASE+284)
|
||||
#define __NR_accept (__NR_SYSCALL_BASE+285)
|
||||
#define __NR_getsockname (__NR_SYSCALL_BASE+286)
|
||||
#define __NR_getpeername (__NR_SYSCALL_BASE+287)
|
||||
#define __NR_socketpair (__NR_SYSCALL_BASE+288)
|
||||
#define __NR_send (__NR_SYSCALL_BASE+289)
|
||||
#define __NR_sendto (__NR_SYSCALL_BASE+290)
|
||||
#define __NR_recv (__NR_SYSCALL_BASE+291)
|
||||
#define __NR_recvfrom (__NR_SYSCALL_BASE+292)
|
||||
#define __NR_shutdown (__NR_SYSCALL_BASE+293)
|
||||
#define __NR_setsockopt (__NR_SYSCALL_BASE+294)
|
||||
#define __NR_getsockopt (__NR_SYSCALL_BASE+295)
|
||||
#define __NR_sendmsg (__NR_SYSCALL_BASE+296)
|
||||
#define __NR_recvmsg (__NR_SYSCALL_BASE+297)
|
||||
#define __NR_semop (__NR_SYSCALL_BASE+298)
|
||||
#define __NR_semget (__NR_SYSCALL_BASE+299)
|
||||
#define __NR_semctl (__NR_SYSCALL_BASE+300)
|
||||
#define __NR_msgsnd (__NR_SYSCALL_BASE+301)
|
||||
#define __NR_msgrcv (__NR_SYSCALL_BASE+302)
|
||||
#define __NR_msgget (__NR_SYSCALL_BASE+303)
|
||||
#define __NR_msgctl (__NR_SYSCALL_BASE+304)
|
||||
#define __NR_shmat (__NR_SYSCALL_BASE+305)
|
||||
#define __NR_shmdt (__NR_SYSCALL_BASE+306)
|
||||
#define __NR_shmget (__NR_SYSCALL_BASE+307)
|
||||
#define __NR_shmctl (__NR_SYSCALL_BASE+308)
|
||||
#define __NR_add_key (__NR_SYSCALL_BASE+309)
|
||||
#define __NR_request_key (__NR_SYSCALL_BASE+310)
|
||||
#define __NR_keyctl (__NR_SYSCALL_BASE+311)
|
||||
#define __NR_semtimedop (__NR_SYSCALL_BASE+312)
|
||||
#define __NR_vserver (__NR_SYSCALL_BASE+313)
|
||||
#define __NR_ioprio_set (__NR_SYSCALL_BASE+314)
|
||||
#define __NR_ioprio_get (__NR_SYSCALL_BASE+315)
|
||||
#define __NR_inotify_init (__NR_SYSCALL_BASE+316)
|
||||
#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317)
|
||||
#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318)
|
||||
#define __NR_mbind (__NR_SYSCALL_BASE+319)
|
||||
#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320)
|
||||
#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321)
|
||||
#define __NR_openat (__NR_SYSCALL_BASE+322)
|
||||
#define __NR_mkdirat (__NR_SYSCALL_BASE+323)
|
||||
#define __NR_mknodat (__NR_SYSCALL_BASE+324)
|
||||
#define __NR_fchownat (__NR_SYSCALL_BASE+325)
|
||||
#define __NR_futimesat (__NR_SYSCALL_BASE+326)
|
||||
#define __NR_fstatat64 (__NR_SYSCALL_BASE+327)
|
||||
#define __NR_unlinkat (__NR_SYSCALL_BASE+328)
|
||||
#define __NR_renameat (__NR_SYSCALL_BASE+329)
|
||||
#define __NR_linkat (__NR_SYSCALL_BASE+330)
|
||||
#define __NR_symlinkat (__NR_SYSCALL_BASE+331)
|
||||
#define __NR_readlinkat (__NR_SYSCALL_BASE+332)
|
||||
#define __NR_fchmodat (__NR_SYSCALL_BASE+333)
|
||||
#define __NR_faccessat (__NR_SYSCALL_BASE+334)
|
||||
#define __NR_pselect6 (__NR_SYSCALL_BASE+335)
|
||||
#define __NR_ppoll (__NR_SYSCALL_BASE+336)
|
||||
#define __NR_unshare (__NR_SYSCALL_BASE+337)
|
||||
#define __NR_set_robust_list (__NR_SYSCALL_BASE+338)
|
||||
#define __NR_get_robust_list (__NR_SYSCALL_BASE+339)
|
||||
#define __NR_splice (__NR_SYSCALL_BASE+340)
|
||||
#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341)
|
||||
#define __NR_sync_file_range2 __NR_arm_sync_file_range
|
||||
#define __NR_tee (__NR_SYSCALL_BASE+342)
|
||||
#define __NR_vmsplice (__NR_SYSCALL_BASE+343)
|
||||
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
|
||||
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
|
||||
#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346)
|
||||
#define __NR_kexec_load (__NR_SYSCALL_BASE+347)
|
||||
#define __NR_utimensat (__NR_SYSCALL_BASE+348)
|
||||
#define __NR_signalfd (__NR_SYSCALL_BASE+349)
|
||||
#define __NR_timerfd_create (__NR_SYSCALL_BASE+350)
|
||||
#define __NR_eventfd (__NR_SYSCALL_BASE+351)
|
||||
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
|
||||
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
|
||||
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
|
||||
#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
|
||||
#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
|
||||
#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
|
||||
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
|
||||
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
|
||||
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
|
||||
#define __NR_preadv (__NR_SYSCALL_BASE+361)
|
||||
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
|
||||
#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363)
|
||||
#define __NR_perf_event_open (__NR_SYSCALL_BASE+364)
|
||||
#define __NR_recvmmsg (__NR_SYSCALL_BASE+365)
|
||||
#define __NR_accept4 (__NR_SYSCALL_BASE+366)
|
||||
#define __NR_fanotify_init (__NR_SYSCALL_BASE+367)
|
||||
#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368)
|
||||
#define __NR_prlimit64 (__NR_SYSCALL_BASE+369)
|
||||
#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370)
|
||||
#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371)
|
||||
#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372)
|
||||
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
|
||||
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
|
||||
#define __NR_setns (__NR_SYSCALL_BASE+375)
|
||||
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
|
||||
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
|
||||
/* 378 for kcmp */
|
||||
|
||||
/*
|
||||
* This may need to be greater than __NR_last_syscall+1 in order to
|
||||
* account for the padding in the syscall table
|
||||
*/
|
||||
|
||||
/*
|
||||
* The following SWIs are ARM private.
|
||||
*/
|
||||
#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
|
||||
#define __ARM_NR_breakpoint (__ARM_NR_BASE+1)
|
||||
#define __ARM_NR_cacheflush (__ARM_NR_BASE+2)
|
||||
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
|
||||
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
|
||||
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
|
||||
|
||||
/*
|
||||
* *NOTE*: This is a ghost syscall private to the kernel. Only the
|
||||
* __kuser_cmpxchg code in entry-armv.S should be aware of its
|
||||
* existence. Don't ever use this from user code.
|
||||
*/
|
||||
|
||||
/*
|
||||
* The following syscalls are obsolete and no longer available for EABI.
|
||||
*/
|
||||
#if !defined(__KERNEL__)
|
||||
#if defined(__ARM_EABI__)
|
||||
#undef __NR_time
|
||||
#undef __NR_umount
|
||||
#undef __NR_stime
|
||||
#undef __NR_alarm
|
||||
#undef __NR_utime
|
||||
#undef __NR_getrlimit
|
||||
#undef __NR_select
|
||||
#undef __NR_readdir
|
||||
#undef __NR_mmap
|
||||
#undef __NR_socketcall
|
||||
#undef __NR_syscall
|
||||
#undef __NR_ipc
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif /* _UAPI__ASM_ARM_UNISTD_H */
|
|
@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET
|
|||
|
||||
config SOC_AT91SAM9
|
||||
bool
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select CPU_ARM926T
|
||||
select GENERIC_CLOCKEVENTS
|
||||
|
||||
menu "Atmel AT91 System-on-Chip"
|
||||
|
||||
|
@ -28,66 +28,66 @@ comment "Atmel AT91 Processor"
|
|||
|
||||
config SOC_AT91SAM9
|
||||
bool
|
||||
select AT91_SAM9_SMC
|
||||
select AT91_SAM9_TIME
|
||||
select CPU_ARM926T
|
||||
select MULTI_IRQ_HANDLER
|
||||
select SPARSE_IRQ
|
||||
select AT91_SAM9_TIME
|
||||
select AT91_SAM9_SMC
|
||||
|
||||
config SOC_AT91RM9200
|
||||
bool "AT91RM9200"
|
||||
select CPU_ARM920T
|
||||
select MULTI_IRQ_HANDLER
|
||||
select SPARSE_IRQ
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select HAVE_AT91_DBGU0
|
||||
select MULTI_IRQ_HANDLER
|
||||
select SPARSE_IRQ
|
||||
|
||||
config SOC_AT91SAM9260
|
||||
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU0
|
||||
select HAVE_NET_MACB
|
||||
select SOC_AT91SAM9
|
||||
help
|
||||
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
|
||||
or AT91SAM9G20 SoC.
|
||||
|
||||
config SOC_AT91SAM9261
|
||||
bool "AT91SAM9261 or AT91SAM9G10"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU0
|
||||
select HAVE_FB_ATMEL
|
||||
select SOC_AT91SAM9
|
||||
help
|
||||
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
|
||||
|
||||
config SOC_AT91SAM9263
|
||||
bool "AT91SAM9263"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU1
|
||||
select HAVE_FB_ATMEL
|
||||
select HAVE_NET_MACB
|
||||
select SOC_AT91SAM9
|
||||
|
||||
config SOC_AT91SAM9RL
|
||||
bool "AT91SAM9RL"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU0
|
||||
select HAVE_FB_ATMEL
|
||||
select SOC_AT91SAM9
|
||||
|
||||
config SOC_AT91SAM9G45
|
||||
bool "AT91SAM9G45 or AT91SAM9M10 families"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU1
|
||||
select HAVE_FB_ATMEL
|
||||
select HAVE_NET_MACB
|
||||
select SOC_AT91SAM9
|
||||
help
|
||||
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
|
||||
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
|
||||
|
||||
config SOC_AT91SAM9X5
|
||||
bool "AT91SAM9x5 family"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU0
|
||||
select HAVE_FB_ATMEL
|
||||
select HAVE_NET_MACB
|
||||
select SOC_AT91SAM9
|
||||
help
|
||||
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
|
||||
This means that your SAM9 name finishes with a '5' (except if it is
|
||||
|
@ -97,9 +97,9 @@ config SOC_AT91SAM9X5
|
|||
|
||||
config SOC_AT91SAM9N12
|
||||
bool "AT91SAM9N12 family"
|
||||
select SOC_AT91SAM9
|
||||
select HAVE_AT91_DBGU0
|
||||
select HAVE_FB_ATMEL
|
||||
select SOC_AT91SAM9
|
||||
help
|
||||
Select this if you are using Atmel's AT91SAM9N12 SoC.
|
||||
|
||||
|
@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45
|
|||
config ARCH_AT91X40
|
||||
bool "AT91x40"
|
||||
depends on !MMU
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
select MULTI_IRQ_HANDLER
|
||||
select SPARSE_IRQ
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
|
@ -23,9 +23,9 @@ config ARCH_CLEP7312
|
|||
|
||||
config ARCH_EDB7211
|
||||
bool "EDB7211"
|
||||
select ISA
|
||||
select ARCH_SPARSEMEM_ENABLE
|
||||
select ARCH_SELECT_MEMORY_MODEL
|
||||
select ARCH_SPARSEMEM_ENABLE
|
||||
select ISA
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
|
||||
evaluation board.
|
||||
|
|
|
@ -4,12 +4,12 @@ config AINTC
|
|||
bool
|
||||
|
||||
config CP_INTC
|
||||
select IRQ_DOMAIN
|
||||
bool
|
||||
select IRQ_DOMAIN
|
||||
|
||||
config ARCH_DAVINCI_DMx
|
||||
select CPU_ARM926T
|
||||
bool
|
||||
select CPU_ARM926T
|
||||
|
||||
menu "TI DaVinci Implementations"
|
||||
|
||||
|
@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x
|
|||
|
||||
config ARCH_DAVINCI_DA830
|
||||
bool "DA830/OMAP-L137/AM17x based system"
|
||||
select CP_INTC
|
||||
select ARCH_DAVINCI_DA8XX
|
||||
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
|
||||
select CP_INTC
|
||||
|
||||
config ARCH_DAVINCI_DA850
|
||||
bool "DA850/OMAP-L138/AM18x based system"
|
||||
select CP_INTC
|
||||
select ARCH_DAVINCI_DA8XX
|
||||
select ARCH_HAS_CPUFREQ
|
||||
select CP_INTC
|
||||
|
||||
config ARCH_DAVINCI_DA8XX
|
||||
select CPU_ARM926T
|
||||
bool
|
||||
select CPU_ARM926T
|
||||
|
||||
config ARCH_DAVINCI_DM365
|
||||
bool "DaVinci 365 based system"
|
||||
|
@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365
|
|||
select ARCH_DAVINCI_DMx
|
||||
|
||||
config ARCH_DAVINCI_TNETV107X
|
||||
bool "TNETV107X based system"
|
||||
select CPU_V6
|
||||
select CP_INTC
|
||||
bool "TNETV107X based system"
|
||||
|
||||
comment "DaVinci Board Type"
|
||||
|
||||
|
@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM
|
|||
bool "TI DM6467 EVM"
|
||||
default ARCH_DAVINCI_DM646x
|
||||
depends on ARCH_DAVINCI_DM646x
|
||||
select MACH_DAVINCI_DM6467TEVM
|
||||
select EEPROM_AT24
|
||||
select I2C
|
||||
select MACH_DAVINCI_DM6467TEVM
|
||||
help
|
||||
Configure this option to specify the whether the board used
|
||||
for development is a DM6467 EVM
|
||||
|
@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM
|
|||
bool "TI DA830/OMAP-L137/AM17x Reference Platform"
|
||||
default ARCH_DAVINCI_DA830
|
||||
depends on ARCH_DAVINCI_DA830
|
||||
select GPIO_PCF857X
|
||||
select EEPROM_AT24
|
||||
select GPIO_PCF857X
|
||||
select I2C
|
||||
help
|
||||
Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
|
||||
|
|
|
@ -31,11 +31,11 @@ config CPU_EXYNOS4210
|
|||
bool "SAMSUNG EXYNOS4210"
|
||||
default y
|
||||
depends on ARCH_EXYNOS4
|
||||
select SAMSUNG_DMADEV
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select PM_GENERIC_DOMAINS
|
||||
select S5P_PM if PM
|
||||
select S5P_SLEEP if PM
|
||||
select PM_GENERIC_DOMAINS
|
||||
select SAMSUNG_DMADEV
|
||||
help
|
||||
Enable EXYNOS4210 CPU support
|
||||
|
||||
|
@ -43,9 +43,9 @@ config SOC_EXYNOS4212
|
|||
bool "SAMSUNG EXYNOS4212"
|
||||
default y
|
||||
depends on ARCH_EXYNOS4
|
||||
select SAMSUNG_DMADEV
|
||||
select S5P_PM if PM
|
||||
select S5P_SLEEP if PM
|
||||
select SAMSUNG_DMADEV
|
||||
help
|
||||
Enable EXYNOS4212 SoC support
|
||||
|
||||
|
@ -61,9 +61,9 @@ config SOC_EXYNOS5250
|
|||
bool "SAMSUNG EXYNOS5250"
|
||||
default y
|
||||
depends on ARCH_EXYNOS5
|
||||
select SAMSUNG_DMADEV
|
||||
select S5P_PM if PM
|
||||
select S5P_SLEEP if PM
|
||||
select SAMSUNG_DMADEV
|
||||
help
|
||||
Enable EXYNOS5250 SoC support
|
||||
|
||||
|
@ -189,71 +189,71 @@ config MACH_SMDKC210
|
|||
config MACH_SMDKV310
|
||||
bool "SMDKV310"
|
||||
select CPU_EXYNOS4210
|
||||
select S5P_DEV_FIMD0
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S3C_DEV_I2C1
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_I2C_HDMIPHY
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_TV
|
||||
select S5P_DEV_USB_EHCI
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select EXYNOS4_DEV_AHCI
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select EXYNOS_DEV_DMA
|
||||
select SAMSUNG_DEV_PWM
|
||||
select EXYNOS4_DEV_USB_OHCI
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
select EXYNOS4_SETUP_KEYPAD
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_FIMD0
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_I2C_HDMIPHY
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_TV
|
||||
select S5P_DEV_USB_EHCI
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
help
|
||||
Machine support for Samsung SMDKV310
|
||||
|
||||
config MACH_ARMLEX4210
|
||||
bool "ARMLEX4210"
|
||||
select CPU_EXYNOS4210
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select EXYNOS4_DEV_AHCI
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS_DEV_DMA
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select EXYNOS4_DEV_AHCI
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
help
|
||||
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
|
||||
|
||||
config MACH_UNIVERSAL_C210
|
||||
bool "Mobile UNIVERSAL_C210 Board"
|
||||
select CPU_EXYNOS4210
|
||||
select S5P_HRT
|
||||
select CLKSRC_MMIO
|
||||
select CPU_EXYNOS4210
|
||||
select EXYNOS4_SETUP_FIMC
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
select EXYNOS4_SETUP_I2C3
|
||||
select EXYNOS4_SETUP_I2C5
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select HAVE_SCHED_CLOCK
|
||||
select S5P_GPIO_INT
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_CSIS0
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_FIMD0
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
|
@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210
|
|||
select S3C_DEV_I2C3
|
||||
select S3C_DEV_I2C5
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S5P_DEV_CSIS0
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_FIMD0
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_I2C_HDMIPHY
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_ONENAND
|
||||
select S5P_DEV_TV
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
select EXYNOS4_SETUP_I2C3
|
||||
select EXYNOS4_SETUP_I2C5
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_FIMC
|
||||
select S5P_GPIO_INT
|
||||
select S5P_HRT
|
||||
select S5P_SETUP_MIPIPHY
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
help
|
||||
Machine support for Samsung Mobile Universal S5PC210 Reference
|
||||
Board.
|
||||
|
@ -283,30 +283,6 @@ config MACH_UNIVERSAL_C210
|
|||
config MACH_NURI
|
||||
bool "Mobile NURI Board"
|
||||
select CPU_EXYNOS4210
|
||||
select S5P_GPIO_INT
|
||||
select S3C_DEV_WDT
|
||||
select S3C_DEV_RTC
|
||||
select S5P_DEV_FIMD0
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_I2C3
|
||||
select S3C_DEV_I2C5
|
||||
select S3C_DEV_I2C6
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S5P_DEV_CSIS0
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_USB_EHCI
|
||||
select S5P_SETUP_MIPIPHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS4_SETUP_FIMC
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
|
@ -315,20 +291,51 @@ config MACH_NURI
|
|||
select EXYNOS4_SETUP_I2C6
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_I2C3
|
||||
select S3C_DEV_I2C5
|
||||
select S3C_DEV_I2C6
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select S5P_DEV_CSIS0
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_FIMC3
|
||||
select S5P_DEV_FIMD0
|
||||
select S5P_DEV_G2D
|
||||
select S5P_DEV_JPEG
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_USB_EHCI
|
||||
select S5P_GPIO_INT
|
||||
select S5P_SETUP_MIPIPHY
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_PWM
|
||||
help
|
||||
Machine support for Samsung Mobile NURI Board.
|
||||
|
||||
config MACH_ORIGEN
|
||||
bool "ORIGEN"
|
||||
select CPU_EXYNOS4210
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select EXYNOS4_DEV_USB_OHCI
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
|
@ -342,14 +349,6 @@ config MACH_ORIGEN
|
|||
select S5P_DEV_USB_EHCI
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_PWM
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS4_DEV_USB_OHCI
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select S3C24XX_PWM
|
||||
help
|
||||
Machine support for ORIGEN based on Samsung EXYNOS4210
|
||||
|
||||
|
@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards"
|
|||
|
||||
config MACH_SMDK4212
|
||||
bool "SMDK4212"
|
||||
select SOC_EXYNOS4212
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
select EXYNOS4_SETUP_I2C3
|
||||
select EXYNOS4_SETUP_I2C7
|
||||
select EXYNOS4_SETUP_KEYPAD
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_HSMMC3
|
||||
select S3C_DEV_I2C1
|
||||
|
@ -375,17 +384,7 @@ config MACH_SMDK4212
|
|||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
select EXYNOS_DEV_SYSMMU
|
||||
select EXYNOS_DEV_DMA
|
||||
select EXYNOS_DEV_DRM
|
||||
select EXYNOS4_SETUP_FIMD0
|
||||
select EXYNOS4_SETUP_I2C1
|
||||
select EXYNOS4_SETUP_I2C3
|
||||
select EXYNOS4_SETUP_I2C7
|
||||
select EXYNOS4_SETUP_KEYPAD
|
||||
select EXYNOS4_SETUP_SDHCI
|
||||
select EXYNOS4_SETUP_USB_PHY
|
||||
select S3C24XX_PWM
|
||||
select SOC_EXYNOS4212
|
||||
help
|
||||
Machine support for Samsung SMDK4212
|
||||
|
||||
|
@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards"
|
|||
|
||||
config MACH_SMDK4412
|
||||
bool "SMDK4412"
|
||||
select SOC_EXYNOS4412
|
||||
select MACH_SMDK4212
|
||||
select SOC_EXYNOS4412
|
||||
help
|
||||
Machine support for Samsung SMDK4412
|
||||
endif
|
||||
|
@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
|
|||
config MACH_EXYNOS4_DT
|
||||
bool "Samsung Exynos4 Machine using device tree"
|
||||
depends on ARCH_EXYNOS4
|
||||
select CPU_EXYNOS4210
|
||||
select USE_OF
|
||||
select ARM_AMBA
|
||||
select CPU_EXYNOS4210
|
||||
select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
|
||||
select PINCTRL
|
||||
select PINCTRL_EXYNOS4
|
||||
select USE_OF
|
||||
help
|
||||
Machine support for Samsung Exynos4 machine with device tree enabled.
|
||||
Select this if a fdt blob is available for the Exynos4 SoC based board.
|
||||
|
@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT
|
|||
config MACH_EXYNOS5_DT
|
||||
bool "SAMSUNG EXYNOS5 Machine using device tree"
|
||||
depends on ARCH_EXYNOS5
|
||||
select ARM_AMBA
|
||||
select SOC_EXYNOS5250
|
||||
select USE_OF
|
||||
select ARM_AMBA
|
||||
help
|
||||
Machine support for Samsung EXYNOS5 machine with device tree enabled.
|
||||
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
|
||||
|
|
|
@ -91,7 +91,7 @@ config FOOTBRIDGE_ADDIN
|
|||
|
||||
# EBSA285 board in either host or addin mode
|
||||
config ARCH_EBSA285
|
||||
select ARCH_MAY_HAVE_PC_FDC
|
||||
bool
|
||||
select ARCH_MAY_HAVE_PC_FDC
|
||||
|
||||
endif
|
||||
|
|
|
@ -12,9 +12,9 @@ config ARCH_H7201
|
|||
|
||||
config ARCH_H7202
|
||||
bool "hms30c7202"
|
||||
depends on ARCH_H720X
|
||||
select CPU_H7202
|
||||
select ZONE_DMA
|
||||
depends on ARCH_H720X
|
||||
help
|
||||
Say Y here if you are using the Hynix HMS30C7202 Reference Board
|
||||
|
||||
|
|
|
@ -41,68 +41,68 @@ config SOC_IMX1
|
|||
|
||||
config SOC_IMX21
|
||||
bool
|
||||
select MACH_MX21
|
||||
select CPU_ARM926T
|
||||
select COMMON_CLK
|
||||
select CPU_ARM926T
|
||||
select IMX_HAVE_IOMUX_V1
|
||||
select MACH_MX21
|
||||
select MXC_AVIC
|
||||
|
||||
config SOC_IMX25
|
||||
bool
|
||||
select ARCH_MX25
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select COMMON_CLK
|
||||
select CPU_ARM926T
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select MXC_AVIC
|
||||
|
||||
config SOC_IMX27
|
||||
bool
|
||||
select MACH_MX27
|
||||
select CPU_ARM926T
|
||||
select COMMON_CLK
|
||||
select CPU_ARM926T
|
||||
select IMX_HAVE_IOMUX_V1
|
||||
select MACH_MX27
|
||||
select MXC_AVIC
|
||||
|
||||
config SOC_IMX31
|
||||
bool
|
||||
select COMMON_CLK
|
||||
select CPU_V6
|
||||
select IMX_HAVE_PLATFORM_MXC_RNGA
|
||||
select MXC_AVIC
|
||||
select COMMON_CLK
|
||||
select SMP_ON_UP if SMP
|
||||
|
||||
config SOC_IMX35
|
||||
bool
|
||||
select CPU_V6K
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select COMMON_CLK
|
||||
select CPU_V6K
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
select HAVE_EPIT
|
||||
select MXC_AVIC
|
||||
select SMP_ON_UP if SMP
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
|
||||
config SOC_IMX5
|
||||
select CPU_V7
|
||||
select MXC_TZIC
|
||||
select COMMON_CLK
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
bool
|
||||
select ARCH_HAS_CPUFREQ
|
||||
select ARCH_MX5
|
||||
bool
|
||||
select ARCH_MXC_IOMUX_V3
|
||||
select COMMON_CLK
|
||||
select CPU_V7
|
||||
select MXC_TZIC
|
||||
|
||||
config SOC_IMX50
|
||||
bool
|
||||
select SOC_IMX5
|
||||
select ARCH_MX50
|
||||
select SOC_IMX5
|
||||
|
||||
config SOC_IMX51
|
||||
bool
|
||||
select SOC_IMX5
|
||||
select ARCH_MX5
|
||||
select ARCH_MX51
|
||||
select PINCTRL
|
||||
select PINCTRL_IMX51
|
||||
select SOC_IMX5
|
||||
|
||||
if ARCH_IMX_V4_V5
|
||||
|
||||
|
@ -112,10 +112,10 @@ config MACH_MXLADS
|
|||
|
||||
config ARCH_MX1ADS
|
||||
bool "MX1ADS platform"
|
||||
select MACH_MXLADS
|
||||
select SOC_IMX1
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select MACH_MXLADS
|
||||
select SOC_IMX1
|
||||
help
|
||||
Say Y here if you are using Motorola MX1ADS/MXLADS boards
|
||||
|
||||
|
@ -127,9 +127,9 @@ config MACH_SCB9328
|
|||
|
||||
config MACH_APF9328
|
||||
bool "APF9328"
|
||||
select SOC_IMX1
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX1
|
||||
help
|
||||
Say Yes here if you are using the Armadeus APF9328 development board
|
||||
|
||||
|
@ -137,11 +137,11 @@ comment "MX21 platforms:"
|
|||
|
||||
config MACH_MX21ADS
|
||||
bool "MX21ADS platform"
|
||||
select SOC_IMX21
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select SOC_IMX21
|
||||
help
|
||||
Include support for MX21ADS platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -150,22 +150,21 @@ comment "MX25 platforms:"
|
|||
|
||||
config MACH_MX25_3DS
|
||||
bool "Support MX25PDK (3DS) Platform"
|
||||
select SOC_IMX25
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select SOC_IMX25
|
||||
|
||||
config MACH_EUKREA_CPUIMX25SD
|
||||
bool "Support Eukrea CPUIMX25 Platform"
|
||||
select SOC_IMX25
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
|
@ -177,6 +176,7 @@ config MACH_EUKREA_CPUIMX25SD
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX25
|
||||
|
||||
choice
|
||||
prompt "Baseboard"
|
||||
|
@ -199,20 +199,19 @@ comment "MX27 platforms:"
|
|||
|
||||
config MACH_MX27ADS
|
||||
bool "MX27ADS platform"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_MXC_W1
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for MX27ADS platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_PCM038
|
||||
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
|
@ -221,6 +220,7 @@ config MACH_PCM038
|
|||
select IMX_HAVE_PLATFORM_MXC_W1
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
|
||||
includes specific configurations for the module and its peripherals.
|
||||
|
@ -242,7 +242,6 @@ endchoice
|
|||
|
||||
config MACH_CPUIMX27
|
||||
bool "Eukrea CPUIMX27 module"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
|
@ -251,6 +250,7 @@ config MACH_CPUIMX27
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_MXC_W1
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for Eukrea CPUIMX27 platform. This includes
|
||||
specific configurations for the module and its peripherals.
|
||||
|
@ -292,7 +292,6 @@ endchoice
|
|||
|
||||
config MACH_MX27_3DS
|
||||
bool "MX27PDK platform"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
|
@ -306,13 +305,13 @@ config MACH_MX27_3DS
|
|||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_DEBUG_BOARD
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for MX27PDK platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_IMX27_VISSTRIM_M10
|
||||
bool "Vista Silicon i.MX27 Visstrim_m10"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
|
@ -321,6 +320,7 @@ config MACH_IMX27_VISSTRIM_M10
|
|||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select LEDS_GPIO_REGISTER
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for Visstrim_m10 platform and its different variants.
|
||||
This includes specific configurations for the board and its
|
||||
|
@ -328,16 +328,15 @@ config MACH_IMX27_VISSTRIM_M10
|
|||
|
||||
config MACH_IMX27LITE
|
||||
bool "LogicPD MX27 LITEKIT platform"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for MX27 LITEKIT platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_PCA100
|
||||
bool "Phytec phyCARD-s (pca100)"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
|
@ -350,27 +349,28 @@ config MACH_PCA100
|
|||
select IMX_HAVE_PLATFORM_MXC_W1
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for phyCARD-s (aka pca100) platform. This
|
||||
includes specific configurations for the module and its peripherals.
|
||||
|
||||
config MACH_MXT_TD60
|
||||
bool "Maxtrack i-MXT TD60"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for i-MXT (aka td60) platform. This
|
||||
includes specific configurations for the module and its peripherals.
|
||||
|
||||
config MACH_IMX27IPCAM
|
||||
bool "IMX27 IPCAM platform"
|
||||
select SOC_IMX27
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX27
|
||||
help
|
||||
Include support for IMX27 IPCAM platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -390,11 +390,11 @@ comment "MX31 platforms:"
|
|||
|
||||
config MACH_MX31ADS
|
||||
bool "Support MX31ADS platforms"
|
||||
select SOC_IMX31
|
||||
default y
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_SSI
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
default y
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for MX31ADS platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -412,21 +412,19 @@ config MACH_MX31ADS_WM1133_EV1
|
|||
|
||||
config MACH_MX31LILLY
|
||||
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for mx31 based LILLY1131 modules. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
config MACH_MX31LITE
|
||||
bool "Support MX31 LITEKIT (LogicPD)"
|
||||
select SOC_IMX31
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
|
@ -435,13 +433,14 @@ config MACH_MX31LITE
|
|||
select IMX_HAVE_PLATFORM_MXC_RTC
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select LEDS_GPIO_REGISTER
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for MX31 LITEKIT platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_PCM037
|
||||
bool "Support Phytec pcm037 (i.MX31) platforms"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
|
@ -452,6 +451,7 @@ config MACH_PCM037
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_MXC_W1
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for Phytec pcm037 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
@ -468,8 +468,6 @@ config MACH_PCM037_EET
|
|||
|
||||
config MACH_MX31_3DS
|
||||
bool "Support MX31PDK (3DS)"
|
||||
select SOC_IMX31
|
||||
select MXC_DEBUG_BOARD
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
|
@ -481,7 +479,9 @@ config MACH_MX31_3DS
|
|||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_DEBUG_BOARD
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for MX31PDK (3DS) platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -497,7 +497,6 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|||
|
||||
config MACH_MX31MOBOARD
|
||||
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
|
@ -509,22 +508,22 @@ config MACH_MX31MOBOARD
|
|||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select LEDS_GPIO_REGISTER
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for mx31moboard platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_QONG
|
||||
bool "Support Dave/DENX QongEVB-LITE platform"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
config MACH_ARMADILLO5X0
|
||||
bool "Support Atmark Armadillo-500 Development Base Board"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
|
@ -533,23 +532,24 @@ config MACH_ARMADILLO5X0
|
|||
select IMX_HAVE_PLATFORM_MXC_MMC
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for Atmark Armadillo-500 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
config MACH_KZM_ARM11_01
|
||||
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for KZM-ARM11-01. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_BUG
|
||||
bool "Support Buglabs BUGBase platform"
|
||||
select SOC_IMX31
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
default y
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select SOC_IMX31
|
||||
help
|
||||
Include support for BUGBase 1.3 platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -565,7 +565,6 @@ comment "MX35 platforms:"
|
|||
|
||||
config MACH_PCM043
|
||||
bool "Support Phytec pcm043 (i.MX35) platforms"
|
||||
select SOC_IMX35
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
|
@ -577,14 +576,13 @@ config MACH_PCM043
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for Phytec pcm043 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
||||
config MACH_MX35_3DS
|
||||
bool "Support MX35PDK platform"
|
||||
select SOC_IMX35
|
||||
select MXC_DEBUG_BOARD
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_FB
|
||||
|
@ -595,13 +593,14 @@ config MACH_MX35_3DS
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_MXC_RTC
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select MXC_DEBUG_BOARD
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for MX35PDK platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_EUKREA_CPUIMX35SD
|
||||
bool "Support Eukrea CPUIMX35 Platform"
|
||||
select SOC_IMX35
|
||||
select IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
|
@ -611,6 +610,7 @@ config MACH_EUKREA_CPUIMX35SD
|
|||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select MXC_ULPI if USB_ULPI
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for Eukrea CPUIMX35 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
@ -635,16 +635,16 @@ endchoice
|
|||
|
||||
config MACH_VPR200
|
||||
bool "Support VPR200 platform"
|
||||
select SOC_IMX35
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IPU_CORE
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select SOC_IMX35
|
||||
help
|
||||
Include support for VPR200 platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
@ -654,11 +654,11 @@ comment "i.MX5 platforms:"
|
|||
config MACH_MX50_RDP
|
||||
bool "Support MX50 reference design platform"
|
||||
depends on BROKEN
|
||||
select SOC_IMX50
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select SOC_IMX50
|
||||
help
|
||||
Include support for MX50 reference design platform (RDP) board. This
|
||||
includes specific configurations for the board and its peripherals.
|
||||
|
@ -667,15 +667,14 @@ comment "i.MX51 machines:"
|
|||
|
||||
config MACH_IMX51_DT
|
||||
bool "Support i.MX51 platforms from device tree"
|
||||
select SOC_IMX51
|
||||
select MACH_MX51_BABBAGE
|
||||
select SOC_IMX51
|
||||
help
|
||||
Include support for Freescale i.MX51 based platforms
|
||||
using the device tree for discovery
|
||||
|
||||
config MACH_MX51_BABBAGE
|
||||
bool "Support MX51 BABBAGE platforms"
|
||||
select SOC_IMX51
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
|
@ -683,6 +682,7 @@ config MACH_MX51_BABBAGE
|
|||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select SOC_IMX51
|
||||
help
|
||||
Include support for MX51 Babbage platform, also known as MX51EVK in
|
||||
u-boot. This includes specific configurations for the board and its
|
||||
|
@ -690,27 +690,27 @@ config MACH_MX51_BABBAGE
|
|||
|
||||
config MACH_MX51_3DS
|
||||
bool "Support MX51PDK (3DS)"
|
||||
select SOC_IMX51
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select MXC_DEBUG_BOARD
|
||||
select SOC_IMX51
|
||||
help
|
||||
Include support for MX51PDK (3DS) platform. This includes specific
|
||||
configurations for the board and its peripherals.
|
||||
|
||||
config MACH_EUKREA_CPUIMX51SD
|
||||
bool "Support Eukrea CPUIMX51SD module"
|
||||
select SOC_IMX51
|
||||
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_IMX_I2C
|
||||
select IMX_HAVE_PLATFORM_IMX_UART
|
||||
select IMX_HAVE_PLATFORM_IMX2_WDT
|
||||
select IMX_HAVE_PLATFORM_MXC_EHCI
|
||||
select IMX_HAVE_PLATFORM_MXC_NAND
|
||||
select IMX_HAVE_PLATFORM_SPI_IMX
|
||||
select SOC_IMX51
|
||||
help
|
||||
Include support for Eukrea CPUIMX51SD platform. This includes
|
||||
specific configurations for the module and its peripherals.
|
||||
|
@ -736,12 +736,12 @@ comment "Device tree only"
|
|||
|
||||
config SOC_IMX53
|
||||
bool "i.MX53 support"
|
||||
select SOC_IMX5
|
||||
select ARCH_MX5
|
||||
select ARCH_MX53
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
select PINCTRL
|
||||
select PINCTRL_IMX53
|
||||
select SOC_IMX5
|
||||
|
||||
help
|
||||
This enables support for Freescale i.MX53 processor.
|
||||
|
|
|
@ -234,8 +234,8 @@ config IXP4XX_QMGR
|
|||
|
||||
config IXP4XX_NPE
|
||||
tristate "IXP4xx Network Processor Engine support"
|
||||
select HOTPLUG
|
||||
select FW_LOADER
|
||||
select HOTPLUG
|
||||
help
|
||||
This driver supports IXP4xx built-in network coprocessors
|
||||
and is automatically selected by Ethernet and HSS drivers.
|
||||
|
|
|
@ -107,22 +107,22 @@ endmenu
|
|||
|
||||
config CPU_PXA168
|
||||
bool
|
||||
select CPU_MOHAWK
|
||||
select COMMON_CLK
|
||||
select CPU_MOHAWK
|
||||
help
|
||||
Select code specific to PXA168
|
||||
|
||||
config CPU_PXA910
|
||||
bool
|
||||
select CPU_MOHAWK
|
||||
select COMMON_CLK
|
||||
select CPU_MOHAWK
|
||||
help
|
||||
Select code specific to PXA910
|
||||
|
||||
config CPU_MMP2
|
||||
bool
|
||||
select CPU_PJ4
|
||||
select COMMON_CLK
|
||||
select CPU_PJ4
|
||||
help
|
||||
Select code specific to MMP2. MMP2 is ARMv7 compatible.
|
||||
|
||||
|
|
|
@ -10,35 +10,35 @@ choice
|
|||
|
||||
config ARCH_MSM7X00A
|
||||
bool "MSM7x00A / MSM7x01A"
|
||||
select MACH_TROUT if !MACH_HALIBUT
|
||||
select ARCH_MSM_ARM11
|
||||
select MSM_SMD
|
||||
select MSM_SMD_PKG3
|
||||
select CPU_V6
|
||||
select GPIO_MSM_V1
|
||||
select MACH_TROUT if !MACH_HALIBUT
|
||||
select MSM_PROC_COMM
|
||||
select MSM_SMD
|
||||
select MSM_SMD_PKG3
|
||||
|
||||
config ARCH_MSM7X30
|
||||
bool "MSM7x30"
|
||||
select MACH_MSM7X30_SURF # if !
|
||||
select ARCH_MSM_SCORPION
|
||||
select CPU_V7
|
||||
select GPIO_MSM_V1
|
||||
select MACH_MSM7X30_SURF # if !
|
||||
select MSM_GPIOMUX
|
||||
select MSM_PROC_COMM
|
||||
select MSM_SMD
|
||||
select MSM_VIC
|
||||
select CPU_V7
|
||||
select MSM_GPIOMUX
|
||||
select GPIO_MSM_V1
|
||||
select MSM_PROC_COMM
|
||||
|
||||
config ARCH_QSD8X50
|
||||
bool "QSD8X50"
|
||||
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
|
||||
select ARCH_MSM_SCORPION
|
||||
select CPU_V7
|
||||
select GPIO_MSM_V1
|
||||
select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
|
||||
select MSM_GPIOMUX
|
||||
select MSM_PROC_COMM
|
||||
select MSM_SMD
|
||||
select MSM_VIC
|
||||
select CPU_V7
|
||||
select MSM_GPIOMUX
|
||||
select GPIO_MSM_V1
|
||||
select MSM_PROC_COMM
|
||||
|
||||
endchoice
|
||||
|
||||
|
@ -47,10 +47,10 @@ config ARCH_MSM8X60
|
|||
select ARCH_MSM_SCORPIONMP
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select MSM_V2_TLMM
|
||||
select GPIO_MSM_V2
|
||||
select MSM_GPIOMUX
|
||||
select MSM_SCM if SMP
|
||||
select MSM_V2_TLMM
|
||||
select USE_OF
|
||||
|
||||
config ARCH_MSM8960
|
||||
|
@ -58,9 +58,9 @@ config ARCH_MSM8960
|
|||
select ARCH_MSM_SCORPIONMP
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select MSM_V2_TLMM
|
||||
select MSM_GPIOMUX
|
||||
select MSM_SCM if SMP
|
||||
select MSM_V2_TLMM
|
||||
select USE_OF
|
||||
|
||||
config MSM_HAS_DEBUG_UART_HS
|
||||
|
@ -110,8 +110,8 @@ config MACH_QSD8X50_SURF
|
|||
|
||||
config MACH_QSD8X50A_ST1_5
|
||||
depends on ARCH_QSD8X50
|
||||
select MSM_SOC_REV_A
|
||||
bool "QSD8x50A ST1.5"
|
||||
select MSM_SOC_REV_A
|
||||
help
|
||||
Support for the Qualcomm ST1.5.
|
||||
|
||||
|
|
|
@ -4,8 +4,8 @@ menu "Nomadik boards"
|
|||
|
||||
config MACH_NOMADIK_8815NHK
|
||||
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
|
||||
select NOMADIK_8815
|
||||
select HAS_MTU
|
||||
select NOMADIK_8815
|
||||
|
||||
endmenu
|
||||
|
||||
|
@ -16,7 +16,7 @@ config I2C_BITBANG_8815NHK
|
|||
tristate "Driver for bit-bang busses found on the 8815 NHK"
|
||||
depends on I2C && MACH_NOMADIK_8815NHK
|
||||
depends on PINCTRL_NOMADIK
|
||||
select I2C_ALGOBIT
|
||||
default y
|
||||
select I2C_ALGOBIT
|
||||
|
||||
endif
|
||||
|
|
|
@ -8,15 +8,15 @@ comment "OMAP Core Type"
|
|||
config ARCH_OMAP730
|
||||
depends on ARCH_OMAP1
|
||||
bool "OMAP730 Based System"
|
||||
select ARCH_OMAP_OTG
|
||||
select CPU_ARM926T
|
||||
select OMAP_MPU_TIMER
|
||||
select ARCH_OMAP_OTG
|
||||
|
||||
config ARCH_OMAP850
|
||||
depends on ARCH_OMAP1
|
||||
bool "OMAP850 Based System"
|
||||
select CPU_ARM926T
|
||||
select ARCH_OMAP_OTG
|
||||
select CPU_ARM926T
|
||||
|
||||
config ARCH_OMAP15XX
|
||||
depends on ARCH_OMAP1
|
||||
|
@ -28,8 +28,8 @@ config ARCH_OMAP15XX
|
|||
config ARCH_OMAP16XX
|
||||
depends on ARCH_OMAP1
|
||||
bool "OMAP16xx Based System"
|
||||
select CPU_ARM926T
|
||||
select ARCH_OMAP_OTG
|
||||
select CPU_ARM926T
|
||||
|
||||
comment "OMAP Board Type"
|
||||
depends on ARCH_OMAP1
|
||||
|
@ -132,8 +132,8 @@ config MACH_OMAP_PALMTT
|
|||
|
||||
config MACH_SX1
|
||||
bool "Siemens SX1"
|
||||
select I2C
|
||||
depends on ARCH_OMAP1 && ARCH_OMAP15XX
|
||||
select I2C
|
||||
help
|
||||
Support for the Siemens SX1 phone. To boot the kernel,
|
||||
you'll need a SX1 compatible bootloader; check out
|
||||
|
|
|
@ -6,19 +6,19 @@ config ARCH_OMAP2PLUS_TYPICAL
|
|||
bool "Typical OMAP configuration"
|
||||
default y
|
||||
select AEABI
|
||||
select REGULATOR
|
||||
select PM_RUNTIME
|
||||
select VFP
|
||||
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
|
||||
select SERIAL_OMAP
|
||||
select SERIAL_OMAP_CONSOLE
|
||||
select HIGHMEM
|
||||
select I2C
|
||||
select I2C_OMAP
|
||||
select MENELAUS if ARCH_OMAP2
|
||||
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
|
||||
select PINCTRL
|
||||
select PM_RUNTIME
|
||||
select REGULATOR
|
||||
select SERIAL_OMAP
|
||||
select SERIAL_OMAP_CONSOLE
|
||||
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
|
||||
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
|
||||
select HIGHMEM
|
||||
select PINCTRL
|
||||
select VFP
|
||||
help
|
||||
Compile a kernel suitable for booting most boards
|
||||
|
||||
|
@ -40,44 +40,44 @@ config ARCH_OMAP3
|
|||
bool "TI OMAP3"
|
||||
depends on ARCH_OMAP2PLUS
|
||||
default y
|
||||
select CPU_V7
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select ARCH_HAS_OPP
|
||||
select PM_RUNTIME if CPU_IDLE
|
||||
select PM_OPP if PM
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select CPU_V7
|
||||
select MULTI_IRQ_HANDLER
|
||||
select SOC_HAS_OMAP2_SDRC
|
||||
select OMAP_INTERCONNECT
|
||||
select PM_OPP if PM
|
||||
select PM_RUNTIME if CPU_IDLE
|
||||
select SOC_HAS_OMAP2_SDRC
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
|
||||
config ARCH_OMAP4
|
||||
bool "TI OMAP4"
|
||||
default y
|
||||
depends on ARCH_OMAP2PLUS
|
||||
select ARCH_HAS_OPP
|
||||
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select ARM_ERRATA_720789
|
||||
select ARM_GIC
|
||||
select CACHE_L2X0
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select HAVE_SMP
|
||||
select LOCAL_TIMERS if SMP
|
||||
select OMAP_INTERCONNECT
|
||||
select PL310_ERRATA_588369
|
||||
select PL310_ERRATA_727915
|
||||
select ARM_ERRATA_720789
|
||||
select ARCH_HAS_OPP
|
||||
select PM_RUNTIME if CPU_IDLE
|
||||
select PM_OPP if PM
|
||||
select PM_RUNTIME if CPU_IDLE
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
|
||||
select OMAP_INTERCONNECT
|
||||
|
||||
config SOC_OMAP5
|
||||
bool "TI OMAP5"
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select HAVE_SMP
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select SOC_HAS_REALTIME_COUNTER
|
||||
select ARM_ARCH_TIMER
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select HAVE_SMP
|
||||
select SOC_HAS_REALTIME_COUNTER
|
||||
|
||||
comment "OMAP Core Type"
|
||||
depends on ARCH_OMAP2
|
||||
|
@ -109,8 +109,8 @@ config SOC_TI81XX
|
|||
config SOC_AM33XX
|
||||
bool "AM33XX support"
|
||||
default y
|
||||
select CPU_V7
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select CPU_V7
|
||||
select MULTI_IRQ_HANDLER
|
||||
|
||||
config OMAP_PACKAGE_ZAF
|
||||
|
@ -157,8 +157,8 @@ config MACH_OMAP_H4
|
|||
bool "OMAP 2420 H4 board"
|
||||
depends on SOC_OMAP2420
|
||||
default y
|
||||
select OMAP_PACKAGE_ZAF
|
||||
select OMAP_DEBUG_DEVICES
|
||||
select OMAP_PACKAGE_ZAF
|
||||
|
||||
config MACH_OMAP_APOLLON
|
||||
bool "OMAP 2420 Apollon board"
|
||||
|
@ -193,8 +193,8 @@ config MACH_OMAP_LDP
|
|||
config MACH_OMAP3530_LV_SOM
|
||||
bool "OMAP3 Logic 3530 LV SOM board"
|
||||
depends on ARCH_OMAP3
|
||||
select OMAP_PACKAGE_CBB
|
||||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
help
|
||||
Support for the LogicPD OMAP3530 SOM Development kit
|
||||
for full description please see the products webpage at
|
||||
|
@ -203,8 +203,8 @@ config MACH_OMAP3530_LV_SOM
|
|||
config MACH_OMAP3_TORPEDO
|
||||
bool "OMAP3 Logic 35x Torpedo board"
|
||||
depends on ARCH_OMAP3
|
||||
select OMAP_PACKAGE_CBB
|
||||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
help
|
||||
Support for the LogicPD OMAP35x Torpedo Development kit
|
||||
for full description please see the products webpage at
|
||||
|
@ -265,17 +265,17 @@ config MACH_NOKIA_N8X0
|
|||
bool "Nokia N800/N810"
|
||||
depends on SOC_OMAP2420
|
||||
default y
|
||||
select OMAP_PACKAGE_ZAC
|
||||
select MACH_NOKIA_N800
|
||||
select MACH_NOKIA_N810
|
||||
select MACH_NOKIA_N810_WIMAX
|
||||
select OMAP_PACKAGE_ZAC
|
||||
|
||||
config MACH_NOKIA_RM680
|
||||
bool "Nokia RM-680/696 board"
|
||||
depends on ARCH_OMAP3
|
||||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
select MACH_NOKIA_RM696
|
||||
select OMAP_PACKAGE_CBB
|
||||
|
||||
config MACH_NOKIA_RX51
|
||||
bool "Nokia RX-51 board"
|
||||
|
@ -288,20 +288,20 @@ config MACH_OMAP_ZOOM2
|
|||
depends on ARCH_OMAP3
|
||||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
select SERIAL_8250
|
||||
select SERIAL_CORE_CONSOLE
|
||||
select SERIAL_8250_CONSOLE
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SERIAL_8250
|
||||
select SERIAL_8250_CONSOLE
|
||||
select SERIAL_CORE_CONSOLE
|
||||
|
||||
config MACH_OMAP_ZOOM3
|
||||
bool "OMAP3630 Zoom3 board"
|
||||
depends on ARCH_OMAP3
|
||||
default y
|
||||
select OMAP_PACKAGE_CBP
|
||||
select SERIAL_8250
|
||||
select SERIAL_CORE_CONSOLE
|
||||
select SERIAL_8250_CONSOLE
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SERIAL_8250
|
||||
select SERIAL_8250_CONSOLE
|
||||
select SERIAL_CORE_CONSOLE
|
||||
|
||||
config MACH_CM_T35
|
||||
bool "CompuLab CM-T35/CM-T3730 modules"
|
||||
|
@ -329,8 +329,8 @@ config MACH_IGEP0030
|
|||
bool "IGEP OMAP3 module"
|
||||
depends on ARCH_OMAP3
|
||||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
select MACH_IGEP0020
|
||||
select OMAP_PACKAGE_CBB
|
||||
|
||||
config MACH_SBC3530
|
||||
bool "OMAP3 SBC STALKER board"
|
||||
|
|
|
@ -6,8 +6,8 @@ config ARCH_PRIMA2
|
|||
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
|
||||
default y
|
||||
select CPU_V7
|
||||
select ZONE_DMA
|
||||
select SIRF_IRQ
|
||||
select ZONE_DMA
|
||||
help
|
||||
Support for CSR SiRFSoC ARM Cortex A9 Platform
|
||||
|
||||
|
|
|
@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
|
|||
|
||||
config MACH_PXA3XX_DT
|
||||
bool "Support PXA3xx platforms from device tree"
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
select POWER_SUPPLY
|
||||
select HAVE_PWM
|
||||
select POWER_SUPPLY
|
||||
select PXA3xx
|
||||
select USE_OF
|
||||
help
|
||||
Include support for Marvell PXA3xx based platforms using
|
||||
|
@ -44,13 +44,13 @@ config ARCH_LUBBOCK
|
|||
|
||||
config MACH_MAINSTONE
|
||||
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
|
||||
select PXA27x
|
||||
select HAVE_PWM
|
||||
select PXA27x
|
||||
|
||||
config MACH_ZYLONITE
|
||||
bool
|
||||
select PXA3xx
|
||||
select HAVE_PWM
|
||||
select PXA3xx
|
||||
|
||||
config MACH_ZYLONITE300
|
||||
bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
|
||||
|
@ -65,19 +65,19 @@ config MACH_ZYLONITE320
|
|||
|
||||
config MACH_LITTLETON
|
||||
bool "PXA3xx Form Factor Platform (aka Littleton)"
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
select CPU_PXA310
|
||||
select PXA3xx
|
||||
|
||||
config MACH_TAVOREVB
|
||||
bool "PXA930 Evaluation Board (aka TavorEVB)"
|
||||
select PXA3xx
|
||||
select CPU_PXA930
|
||||
select PXA3xx
|
||||
|
||||
config MACH_SAAR
|
||||
bool "PXA930 Handheld Platform (aka SAAR)"
|
||||
select PXA3xx
|
||||
select CPU_PXA930
|
||||
select PXA3xx
|
||||
|
||||
comment "Third Party Dev Platforms (sorted by vendor name)"
|
||||
|
||||
|
@ -87,29 +87,29 @@ config ARCH_PXA_IDP
|
|||
|
||||
config ARCH_VIPER
|
||||
bool "Arcom/Eurotech VIPER SBC"
|
||||
select PXA25x
|
||||
select ISA
|
||||
select I2C_GPIO
|
||||
select HAVE_PWM
|
||||
select PXA_HAVE_ISA_IRQS
|
||||
select ARCOM_PCMCIA
|
||||
select HAVE_PWM
|
||||
select I2C_GPIO
|
||||
select ISA
|
||||
select PXA25x
|
||||
select PXA_HAVE_ISA_IRQS
|
||||
|
||||
config MACH_ARCOM_ZEUS
|
||||
bool "Arcom/Eurotech ZEUS SBC"
|
||||
select PXA27x
|
||||
select ISA
|
||||
select PXA_HAVE_ISA_IRQS
|
||||
select ARCOM_PCMCIA
|
||||
select ISA
|
||||
select PXA27x
|
||||
select PXA_HAVE_ISA_IRQS
|
||||
|
||||
config MACH_BALLOON3
|
||||
bool "Balloon 3 board"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_CSB726
|
||||
bool "Enable Cogent CSB726 System On a Module"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a Cogent
|
||||
CSB726 System On Module.
|
||||
|
@ -121,11 +121,11 @@ config CSB726_CSB701
|
|||
config MACH_ARMCORE
|
||||
bool "CompuLab CM-X255/CM-X270 modules"
|
||||
select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA25x
|
||||
select MIGHT_HAVE_PCI
|
||||
select NEED_MACH_IO_H if PCI
|
||||
select PXA25x
|
||||
select PXA27x
|
||||
|
||||
config MACH_EM_X270
|
||||
bool "CompuLab EM-x270 platform"
|
||||
|
@ -137,10 +137,10 @@ config MACH_EXEDA
|
|||
|
||||
config MACH_CM_X300
|
||||
bool "CompuLab CM-X300 modules"
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
select CPU_PXA310
|
||||
select HAVE_PWM
|
||||
select PXA3xx
|
||||
|
||||
config MACH_CAPC7117
|
||||
bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
|
||||
|
@ -168,22 +168,22 @@ endchoice
|
|||
|
||||
config MACH_INTELMOTE2
|
||||
bool "Intel Mote 2 Platform"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_STARGATE2
|
||||
bool "Intel Stargate 2 Platform"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_XCEP
|
||||
bool "Iskratel Electronics XCEP"
|
||||
select PXA25x
|
||||
select MTD
|
||||
select MTD_PHYSMAP
|
||||
select MTD_CFI_INTELEXT
|
||||
select MTD_CFI
|
||||
select MTD_CFI_INTELEXT
|
||||
select MTD_CHAR
|
||||
select MTD_PHYSMAP
|
||||
select PXA25x
|
||||
select SMC91X
|
||||
help
|
||||
PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
|
||||
|
@ -195,14 +195,14 @@ config TRIZEPS_PXA
|
|||
config MACH_TRIZEPS4
|
||||
bool "Keith und Koep Trizeps4 DIMM-Module"
|
||||
depends on TRIZEPS_PXA
|
||||
select TRIZEPS_PCMCIA
|
||||
select PXA27x
|
||||
select TRIZEPS_PCMCIA
|
||||
|
||||
config MACH_TRIZEPS4WL
|
||||
bool "Keith und Koep Trizeps4-WL DIMM-Module"
|
||||
depends on TRIZEPS_PXA
|
||||
select TRIZEPS_PCMCIA
|
||||
select PXA27x
|
||||
select TRIZEPS_PCMCIA
|
||||
|
||||
choice
|
||||
prompt "Select base board for Trizeps module"
|
||||
|
@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA
|
|||
|
||||
config MACH_LOGICPD_PXA270
|
||||
bool "LogicPD PXA270 Card Engine Development Platform"
|
||||
select PXA27x
|
||||
select HAVE_PWM
|
||||
select PXA27x
|
||||
|
||||
config MACH_PCM027
|
||||
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_PCM990_BASEBOARD
|
||||
bool "PHYTEC PCM-990 development board"
|
||||
select HAVE_PWM
|
||||
depends on MACH_PCM027
|
||||
select HAVE_PWM
|
||||
|
||||
choice
|
||||
prompt "display on pcm990"
|
||||
|
@ -266,19 +266,19 @@ config MACH_COLIBRI
|
|||
config MACH_COLIBRI_PXA270_INCOME
|
||||
bool "Income s.r.o. PXA270 SBC"
|
||||
depends on MACH_COLIBRI
|
||||
select PXA27x
|
||||
select HAVE_PWM
|
||||
select PXA27x
|
||||
|
||||
config MACH_COLIBRI300
|
||||
bool "Toradex Colibri PXA300/310"
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
select CPU_PXA310
|
||||
select PXA3xx
|
||||
|
||||
config MACH_COLIBRI320
|
||||
bool "Toradex Colibri PXA320"
|
||||
select PXA3xx
|
||||
select CPU_PXA320
|
||||
select PXA3xx
|
||||
|
||||
config MACH_COLIBRI_EVALBOARD
|
||||
bool "Toradex Colibri Evaluation Carrier Board support"
|
||||
|
@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD
|
|||
|
||||
config MACH_VPAC270
|
||||
bool "Voipac PXA270"
|
||||
select PXA27x
|
||||
select HAVE_PATA_PLATFORM
|
||||
select PXA27x
|
||||
help
|
||||
PXA270 based Single Board Computer.
|
||||
|
||||
|
@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)"
|
|||
|
||||
config MACH_H4700
|
||||
bool "HP iPAQ hx4700"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select HAVE_PWM
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_H5000
|
||||
bool "HP iPAQ h5000"
|
||||
|
@ -309,16 +309,16 @@ config MACH_HIMALAYA
|
|||
|
||||
config MACH_MAGICIAN
|
||||
bool "Enable HTC Magician Support"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select HAVE_PWM
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_MIOA701
|
||||
bool "Mitac Mio A701 Support"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select HAVE_PWM
|
||||
select GPIO_SYSFS
|
||||
select HAVE_PWM
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a
|
||||
MIO A701. Currently there is only basic support
|
||||
|
@ -326,9 +326,9 @@ config MACH_MIOA701
|
|||
|
||||
config PXA_EZX
|
||||
bool "Motorola EZX Platform"
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select HAVE_PWM
|
||||
select IWMMXT
|
||||
select PXA27x
|
||||
|
||||
config MACH_EZX_A780
|
||||
bool "Motorola EZX A780"
|
||||
|
@ -393,9 +393,9 @@ config MACH_PALMT5
|
|||
bool "Palm Tungsten|T5"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a Palm Tungsten|T5
|
||||
handheld computer.
|
||||
|
@ -404,9 +404,9 @@ config MACH_PALMTX
|
|||
bool "Palm T|X"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a Palm T|X
|
||||
handheld computer.
|
||||
|
@ -415,9 +415,9 @@ config MACH_PALMZ72
|
|||
bool "Palm Zire 72"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on Palm Zire 72
|
||||
handheld computer.
|
||||
|
@ -426,9 +426,9 @@ config MACH_PALMLD
|
|||
bool "Palm LifeDrive"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a Palm LifeDrive
|
||||
handheld computer.
|
||||
|
@ -441,10 +441,10 @@ config MACH_CENTRO
|
|||
bool "Palm Centro 685 (GSM)"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PALM_TREO
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
|
||||
smartphone.
|
||||
|
@ -453,37 +453,37 @@ config MACH_TREO680
|
|||
bool "Palm Treo 680"
|
||||
default y
|
||||
depends on ARCH_PXA_PALM
|
||||
select MACH_PALM27X
|
||||
select PXA27x
|
||||
select IWMMXT
|
||||
select MACH_PALM27X
|
||||
select PALM_TREO
|
||||
select PXA27x
|
||||
help
|
||||
Say Y here if you intend to run this kernel on Palm Treo 680
|
||||
smartphone.
|
||||
|
||||
config MACH_RAUMFELD_RC
|
||||
bool "Raumfeld Controller"
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
select POWER_SUPPLY
|
||||
select HAVE_PWM
|
||||
select POWER_SUPPLY
|
||||
select PXA3xx
|
||||
|
||||
config MACH_RAUMFELD_CONNECTOR
|
||||
bool "Raumfeld Connector"
|
||||
select CPU_PXA300
|
||||
select POWER_SUPPLY
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
|
||||
config MACH_RAUMFELD_SPEAKER
|
||||
bool "Raumfeld Speaker"
|
||||
select CPU_PXA300
|
||||
select POWER_SUPPLY
|
||||
select PXA3xx
|
||||
select CPU_PXA300
|
||||
|
||||
config PXA_SHARPSL
|
||||
bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
|
||||
select SHARP_SCOOP
|
||||
select SHARP_PARAM
|
||||
select SHARP_SCOOP
|
||||
help
|
||||
Say Y here if you intend to run this kernel on a
|
||||
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
|
||||
|
@ -526,11 +526,11 @@ config MACH_HUSKY
|
|||
config MACH_AKITA
|
||||
bool "Enable Sharp SL-1000 (Akita) Support"
|
||||
depends on PXA_SHARPSL
|
||||
select PXA27x
|
||||
select PXA_SHARP_Cxx00
|
||||
select MACH_SPITZ
|
||||
select I2C
|
||||
select I2C_PXA
|
||||
select MACH_SPITZ
|
||||
select PXA27x
|
||||
select PXA_SHARP_Cxx00
|
||||
|
||||
config MACH_SPITZ
|
||||
bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
|
||||
|
@ -575,8 +575,8 @@ config MACH_ICONTROL
|
|||
|
||||
config ARCH_PXA_ESERIES
|
||||
bool "PXA based Toshiba e-series PDAs"
|
||||
select PXA25x
|
||||
select FB_W100
|
||||
select PXA25x
|
||||
|
||||
config MACH_E330
|
||||
bool "Toshiba e330"
|
||||
|
@ -628,8 +628,8 @@ config MACH_E800
|
|||
|
||||
config MACH_ZIPIT2
|
||||
bool "Zipit Z2 Handheld"
|
||||
select PXA27x
|
||||
select HAVE_PWM
|
||||
select PXA27x
|
||||
endif
|
||||
endmenu
|
||||
|
||||
|
@ -720,9 +720,9 @@ config SHARPSL_PM
|
|||
config SHARPSL_PM_MAX1111
|
||||
bool
|
||||
select HWMON
|
||||
select SENSORS_MAX1111
|
||||
select SPI
|
||||
select SPI_MASTER
|
||||
select SENSORS_MAX1111
|
||||
|
||||
config PXA_HAVE_ISA_IRQS
|
||||
bool
|
||||
|
|
|
@ -21,8 +21,8 @@ config REALVIEW_EB_A9MP
|
|||
config REALVIEW_EB_ARM11MP
|
||||
bool "Support ARM11MPCore Tile"
|
||||
depends on MACH_REALVIEW_EB
|
||||
select CPU_V6K
|
||||
select ARCH_HAS_BARRIERS if SMP
|
||||
select CPU_V6K
|
||||
select HAVE_SMP
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
help
|
||||
|
@ -40,12 +40,12 @@ config REALVIEW_EB_ARM11MP_REVB
|
|||
|
||||
config MACH_REALVIEW_PB11MP
|
||||
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
|
||||
select CPU_V6K
|
||||
select ARCH_HAS_BARRIERS if SMP
|
||||
select ARM_GIC
|
||||
select CPU_V6K
|
||||
select HAVE_PATA_PLATFORM
|
||||
select HAVE_SMP
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
select ARCH_HAS_BARRIERS if SMP
|
||||
help
|
||||
Include support for the ARM(R) RealView(R) Platform Baseboard for
|
||||
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
|
||||
|
@ -54,8 +54,8 @@ config MACH_REALVIEW_PB11MP
|
|||
# ARMv6 CPU without K extensions, but does have the new exclusive ops
|
||||
config MACH_REALVIEW_PB1176
|
||||
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
|
||||
select CPU_V6
|
||||
select ARM_GIC
|
||||
select CPU_V6
|
||||
select HAVE_TCM
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
help
|
||||
|
@ -73,8 +73,8 @@ config REALVIEW_PB1176_SECURE_FLASH
|
|||
|
||||
config MACH_REALVIEW_PBA8
|
||||
bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select HAVE_PATA_PLATFORM
|
||||
help
|
||||
Include support for the ARM(R) RealView Platform Baseboard for
|
||||
|
@ -83,11 +83,11 @@ config MACH_REALVIEW_PBA8
|
|||
|
||||
config MACH_REALVIEW_PBX
|
||||
bool "Support RealView(R) Platform Baseboard Explore"
|
||||
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
|
||||
select ARM_GIC
|
||||
select HAVE_PATA_PLATFORM
|
||||
select HAVE_SMP
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
|
||||
select ZONE_DMA if SPARSEMEM
|
||||
help
|
||||
Include support for the ARM(R) RealView(R) Platform Baseboard
|
||||
|
|
|
@ -7,7 +7,7 @@
|
|||
config S3C2412_CPUFREQ
|
||||
bool
|
||||
depends on CPU_FREQ_S3C24XX && CPU_S3C2412
|
||||
select S3C2412_IOTIMING
|
||||
default y
|
||||
select S3C2412_IOTIMING
|
||||
help
|
||||
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
|
||||
|
|
|
@ -5,8 +5,8 @@
|
|||
config S3C2440_CPUFREQ
|
||||
bool "S3C2440/S3C2442 CPU Frequency scaling support"
|
||||
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
|
||||
select S3C2410_CPUFREQ_UTILS
|
||||
default y
|
||||
select S3C2410_CPUFREQ_UTILS
|
||||
help
|
||||
CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
|
||||
|
||||
|
|
|
@ -17,10 +17,10 @@ config CPU_S3C2410
|
|||
bool "SAMSUNG S3C2410"
|
||||
default y
|
||||
select CPU_ARM920T
|
||||
select S3C2410_CLOCK
|
||||
select CPU_LLSERIAL_S3C2410
|
||||
select S3C2410_PM if PM
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
|
||||
select S3C2410_PM if PM
|
||||
help
|
||||
Support for S3C2410 and S3C2410A family from the S3C24XX line
|
||||
of Samsung Mobile CPUs.
|
||||
|
@ -30,8 +30,8 @@ config CPU_S3C2412
|
|||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM926T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select S3C2412_PM if PM
|
||||
select S3C2412_DMA if S3C24XX_DMA
|
||||
select S3C2412_PM if PM
|
||||
help
|
||||
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
|
||||
|
||||
|
@ -40,10 +40,10 @@ config CPU_S3C2416
|
|||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM926T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2416_PM if PM
|
||||
select S3C2443_COMMON
|
||||
select S3C2443_DMA if S3C24XX_DMA
|
||||
select S3C2416_PM if PM
|
||||
select SAMSUNG_CLKSRC
|
||||
help
|
||||
Support for the S3C2416 SoC from the S3C24XX line
|
||||
|
||||
|
@ -75,9 +75,9 @@ config CPU_S3C2443
|
|||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM920T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2443_COMMON
|
||||
select S3C2443_DMA if S3C24XX_DMA
|
||||
select SAMSUNG_CLKSRC
|
||||
help
|
||||
Support for the S3C2443 SoC from the S3C24XX line
|
||||
|
||||
|
@ -156,16 +156,16 @@ config MACH_AML_M5900
|
|||
|
||||
config ARCH_BAST
|
||||
bool "Simtec Electronics BAST (EB2410ITX)"
|
||||
select S3C2410_IOTIMING if S3C2410_CPUFREQ
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C24XX_SIMTEC_NOR
|
||||
select S3C24XX_SIMTEC_USB
|
||||
select MACH_BAST_IDE
|
||||
select S3C24XX_DCLK
|
||||
select ISA
|
||||
select MACH_BAST_IDE
|
||||
select S3C2410_IOTIMING if S3C2410_CPUFREQ
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_SIMTEC_NOR
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C24XX_SIMTEC_USB
|
||||
select S3C_DEV_HWMON
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics EB2410ITX
|
||||
development board (also known as BAST)
|
||||
|
@ -181,9 +181,9 @@ config BAST_PC104_IRQ
|
|||
config ARCH_H1940
|
||||
bool "IPAQ H1940"
|
||||
select PM_H1940 if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C24XX_SETUP_TS
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the HP IPAQ H1940
|
||||
|
||||
|
@ -203,23 +203,23 @@ config PM_H1940
|
|||
config MACH_N30
|
||||
bool "Acer N30 family"
|
||||
select MACH_N35
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you want suppt for the Acer N30, Acer N35,
|
||||
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
|
||||
|
||||
config MACH_OTOM
|
||||
bool "NexVision OTOM Board"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Nex Vision OTOM board
|
||||
|
||||
config MACH_QT2410
|
||||
bool "QT2410"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Armzone QT2410
|
||||
|
||||
|
@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
|
|||
|
||||
config MACH_VR1000
|
||||
bool "Thorcom VR1000"
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select MACH_BAST_IDE
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_SIMTEC_NOR
|
||||
select MACH_BAST_IDE
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C24XX_SIMTEC_USB
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Thorcom VR1000 board.
|
||||
|
||||
|
@ -285,8 +285,8 @@ comment "S3C2412 Boards"
|
|||
|
||||
config MACH_JIVE
|
||||
bool "Logitech Jive"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Logitech Jive.
|
||||
|
||||
|
@ -314,15 +314,15 @@ config MACH_SMDK2413
|
|||
bool "SMDK2413"
|
||||
select MACH_S3C2413
|
||||
select S3C24XX_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using an SMDK2413
|
||||
|
||||
config MACH_VSTMS
|
||||
bool "VMSTMS"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using an VSTMS board
|
||||
|
||||
|
@ -351,13 +351,13 @@ comment "S3C2416 Boards"
|
|||
|
||||
config MACH_SMDK2416
|
||||
bool "SMDK2416"
|
||||
select S3C2416_SETUP_SDHCI
|
||||
select S3C24XX_SMDK
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2416_SETUP_SDHCI
|
||||
help
|
||||
Say Y here if you are using an SMDK2416
|
||||
|
||||
|
@ -379,11 +379,11 @@ comment "S3C2440 Boards"
|
|||
|
||||
config MACH_ANUBIS
|
||||
bool "Simtec Electronics ANUBIS"
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select HAVE_PATA_PLATFORM
|
||||
select S3C24XX_GPIO_EXTRA64
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_GPIO_EXTRA64
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics ANUBIS
|
||||
|
@ -391,18 +391,18 @@ config MACH_ANUBIS
|
|||
|
||||
config MACH_AT2440EVB
|
||||
bool "Avantech AT2440EVB development board"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the AT2440EVB development board
|
||||
|
||||
config MACH_MINI2440
|
||||
bool "MINI2440 development board"
|
||||
select EEPROM_AT24
|
||||
select NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
select LEDS_TRIGGER
|
||||
select LEDS_TRIGGER_BACKLIGHT
|
||||
select NEW_LEDS
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
|
@ -412,20 +412,20 @@ config MACH_MINI2440
|
|||
config MACH_NEXCODER_2440
|
||||
bool "NexVision NEXCODER 2440 Light Board"
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
|
||||
|
||||
config MACH_OSIRIS
|
||||
bool "Simtec IM2440D20 (OSIRIS) module"
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C24XX_GPIO_EXTRA128
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_GPIO_EXTRA128
|
||||
select S3C24XX_SIMTEC_PM if PM
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Simtec IM2440D20 module, also
|
||||
known as the Osiris.
|
||||
|
@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
|
|||
|
||||
config MACH_RX3715
|
||||
bool "HP iPAQ rx3715"
|
||||
select S3C2440_XTAL_16934400
|
||||
select PM_H1940 if PM
|
||||
select S3C2440_XTAL_16934400
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the HP iPAQ rx3715.
|
||||
|
@ -455,8 +455,8 @@ config ARCH_S3C2440
|
|||
bool "SMDK2440"
|
||||
select S3C2440_XTAL_16934400
|
||||
select S3C24XX_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the SMDK2440.
|
||||
|
||||
|
@ -478,11 +478,11 @@ comment "S3C2442 Boards"
|
|||
|
||||
config MACH_NEO1973_GTA02
|
||||
bool "Openmoko GTA02 / Freerunner phone"
|
||||
select I2C
|
||||
select MACH_NEO1973
|
||||
select MFD_PCF50633
|
||||
select PCF50633_GPIO
|
||||
select I2C
|
||||
select POWER_SUPPLY
|
||||
select MACH_NEO1973
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
|
@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
|
|||
|
||||
config MACH_RX1950
|
||||
bool "HP iPAQ rx1950"
|
||||
select S3C24XX_DCLK
|
||||
select PM_H1940 if PM
|
||||
select I2C
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_NAND
|
||||
select PM_H1940 if PM
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C2440_XTAL_16934400
|
||||
select S3C24XX_DCLK
|
||||
select S3C24XX_PWM
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you're using HP iPAQ rx1950
|
||||
|
||||
|
|
|
@ -7,9 +7,9 @@
|
|||
config PLAT_S3C64XX
|
||||
bool
|
||||
depends on ARCH_S3C64XX
|
||||
select SAMSUNG_WAKEMASK
|
||||
select PM_GENERIC_DOMAINS
|
||||
default y
|
||||
select PM_GENERIC_DOMAINS
|
||||
select SAMSUNG_WAKEMASK
|
||||
help
|
||||
Base platform code for any Samsung S3C64XX device
|
||||
|
||||
|
@ -31,8 +31,8 @@ config S3C64XX_DMA
|
|||
select S3C_DMA
|
||||
|
||||
config S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_SDHCI_GPIO
|
||||
bool
|
||||
select S3C64XX_SETUP_SDHCI_GPIO
|
||||
help
|
||||
Internal configuration for default SDHCI setup for S3C6400 and
|
||||
S3C6410 SoCs.
|
||||
|
@ -93,9 +93,9 @@ config S3C64XX_SETUP_USB_PHY
|
|||
config MACH_SMDK6400
|
||||
bool "SMDK6400"
|
||||
select CPU_S3C6400
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_NAND
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
help
|
||||
Machine support for the Samsung SMDK6400
|
||||
|
||||
|
@ -104,21 +104,21 @@ config MACH_SMDK6400
|
|||
config MACH_ANW6410
|
||||
bool "A&W6410"
|
||||
select CPU_S3C6410
|
||||
select S3C_DEV_FB
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C_DEV_FB
|
||||
help
|
||||
Machine support for the A&W6410
|
||||
|
||||
config MACH_MINI6410
|
||||
bool "MINI6410"
|
||||
select CPU_S3C6410
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_FB
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C_DEV_USB_HOST
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_TS
|
||||
help
|
||||
|
@ -127,42 +127,42 @@ config MACH_MINI6410
|
|||
config MACH_REAL6410
|
||||
bool "REAL6410"
|
||||
select CPU_S3C6410
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C_DEV_FB
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_TS
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Machine support for the CoreWind REAL6410
|
||||
|
||||
config MACH_SMDK6410
|
||||
bool "SMDK6410"
|
||||
select CPU_S3C6410
|
||||
select SAMSUNG_DEV_ADC
|
||||
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_I2C1
|
||||
select S3C64XX_SETUP_IDE
|
||||
select S3C64XX_SETUP_KEYPAD
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_USB_PHY
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_I2C1
|
||||
select SAMSUNG_DEV_IDE
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_RTC
|
||||
select SAMSUNG_DEV_TS
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_IDE
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_I2C1
|
||||
select S3C64XX_SETUP_IDE
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_KEYPAD
|
||||
select S3C64XX_SETUP_USB_PHY
|
||||
select SAMSUNG_DEV_TS
|
||||
help
|
||||
Machine support for the Samsung SMDK6410
|
||||
|
||||
|
@ -198,13 +198,13 @@ endchoice
|
|||
config SMDK6410_WM1190_EV1
|
||||
bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
|
||||
depends on MACH_SMDK6410
|
||||
select MFD_WM8350_CONFIG_MODE_0
|
||||
select MFD_WM8350_CONFIG_MODE_3
|
||||
select MFD_WM8350_I2C
|
||||
select MFD_WM8352_CONFIG_MODE_0
|
||||
select REGULATOR
|
||||
select REGULATOR_WM8350
|
||||
select SAMSUNG_GPIO_EXTRA64
|
||||
select MFD_WM8350_I2C
|
||||
select MFD_WM8350_CONFIG_MODE_0
|
||||
select MFD_WM8350_CONFIG_MODE_3
|
||||
select MFD_WM8352_CONFIG_MODE_0
|
||||
help
|
||||
The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
|
||||
and audio daughtercard for the Samsung SMDK6410 reference
|
||||
|
@ -216,11 +216,11 @@ config SMDK6410_WM1190_EV1
|
|||
config SMDK6410_WM1192_EV1
|
||||
bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
|
||||
depends on MACH_SMDK6410
|
||||
select MFD_WM831X
|
||||
select MFD_WM831X_I2C
|
||||
select REGULATOR
|
||||
select REGULATOR_WM831X
|
||||
select SAMSUNG_GPIO_EXTRA64
|
||||
select MFD_WM831X
|
||||
select MFD_WM831X_I2C
|
||||
help
|
||||
The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
|
||||
daughtercard for the Samsung SMDK6410 reference platform.
|
||||
|
@ -232,19 +232,19 @@ config SMDK6410_WM1192_EV1
|
|||
config MACH_NCP
|
||||
bool "NCP"
|
||||
select CPU_S3C6410
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C64XX_SETUP_I2C1
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_I2C1
|
||||
help
|
||||
Machine support for the Samsung NCP
|
||||
|
||||
config MACH_HMT
|
||||
bool "Airgoo HMT"
|
||||
select CPU_S3C6410
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select SAMSUNG_DEV_PWM
|
||||
help
|
||||
Machine support for the Airgoo HMT
|
||||
|
@ -252,17 +252,17 @@ config MACH_HMT
|
|||
config MACH_SMARTQ
|
||||
bool
|
||||
select CPU_S3C6410
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_USB_PHY
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HWMON
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_USB_PHY
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
|
@ -284,26 +284,26 @@ config MACH_SMARTQ7
|
|||
config MACH_WLF_CRAGG_6410
|
||||
bool "Wolfson Cragganmore 6410"
|
||||
select CPU_S3C6410
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select I2C
|
||||
select LEDS_GPIO_REGISTER
|
||||
select S3C64XX_DEV_SPI0
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_I2C1
|
||||
select S3C64XX_SETUP_IDE
|
||||
select S3C64XX_SETUP_FB_24BPP
|
||||
select S3C64XX_SETUP_KEYPAD
|
||||
select S3C64XX_SETUP_SDHCI
|
||||
select S3C64XX_SETUP_SPI
|
||||
select S3C64XX_SETUP_USB_PHY
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_WDT
|
||||
select S3C_DEV_RTC
|
||||
select S3C64XX_DEV_SPI0
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_GPIO_EXTRA128
|
||||
select I2C
|
||||
select LEDS_GPIO_REGISTER
|
||||
help
|
||||
Machine support for the Wolfson Cragganmore S3C6410 variant.
|
||||
|
|
|
@ -9,18 +9,18 @@ if ARCH_S5P64X0
|
|||
|
||||
config CPU_S5P6440
|
||||
bool
|
||||
select SAMSUNG_DMADEV
|
||||
select S5P_HRT
|
||||
select S5P_SLEEP if PM
|
||||
select SAMSUNG_DMADEV
|
||||
select SAMSUNG_WAKEMASK if PM
|
||||
help
|
||||
Enable S5P6440 CPU support
|
||||
|
||||
config CPU_S5P6450
|
||||
bool
|
||||
select SAMSUNG_DMADEV
|
||||
select S5P_HRT
|
||||
select S5P_SLEEP if PM
|
||||
select SAMSUNG_DMADEV
|
||||
select SAMSUNG_WAKEMASK if PM
|
||||
help
|
||||
Enable S5P6450 CPU support
|
||||
|
@ -52,19 +52,19 @@ config MACH_SMDK6440
|
|||
bool "SMDK6440"
|
||||
select CPU_S5P6440
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S5P64X0_SETUP_FB_24BPP
|
||||
select S5P64X0_SETUP_I2C1
|
||||
select S5P64X0_SETUP_SDHCI_GPIO
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
select S5P64X0_SETUP_FB_24BPP
|
||||
select S5P64X0_SETUP_I2C1
|
||||
select S5P64X0_SETUP_SDHCI_GPIO
|
||||
help
|
||||
Machine support for the Samsung SMDK6440
|
||||
|
||||
|
@ -72,19 +72,19 @@ config MACH_SMDK6450
|
|||
bool "SMDK6450"
|
||||
select CPU_S5P6450
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S5P64X0_SETUP_FB_24BPP
|
||||
select S5P64X0_SETUP_I2C1
|
||||
select S5P64X0_SETUP_SDHCI_GPIO
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
select S5P64X0_SETUP_FB_24BPP
|
||||
select S5P64X0_SETUP_I2C1
|
||||
select S5P64X0_SETUP_SDHCI_GPIO
|
||||
help
|
||||
Machine support for the Samsung SMDK6450
|
||||
|
||||
|
|
|
@ -60,12 +60,6 @@ config MACH_SMDKC100
|
|||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_IDE
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
select S5PC100_SETUP_FB_24BPP
|
||||
select S5PC100_SETUP_I2C1
|
||||
select S5PC100_SETUP_IDE
|
||||
|
@ -74,6 +68,12 @@ config MACH_SMDKC100
|
|||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select SAMSUNG_DEV_ADC
|
||||
select SAMSUNG_DEV_BACKLIGHT
|
||||
select SAMSUNG_DEV_IDE
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
help
|
||||
Machine support for the Samsung SMDKC100
|
||||
|
||||
|
|
|
@ -11,11 +11,11 @@ if ARCH_S5PV210
|
|||
|
||||
config CPU_S5PV210
|
||||
bool
|
||||
select SAMSUNG_DMADEV
|
||||
select S5P_EXT_INT
|
||||
select S5P_HRT
|
||||
select S5P_PM if PM
|
||||
select S5P_SLEEP if PM
|
||||
select SAMSUNG_DMADEV
|
||||
help
|
||||
Enable S5PV210 CPU support
|
||||
|
||||
|
@ -76,44 +76,44 @@ config MACH_AQUILA
|
|||
bool "Aquila"
|
||||
select CPU_S5PV210
|
||||
select S3C_DEV_FB
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S5P_DEV_ONENAND
|
||||
select S5PV210_SETUP_FB_24BPP
|
||||
select S5PV210_SETUP_SDHCI
|
||||
select S5PV210_SETUP_USB_PHY
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_ONENAND
|
||||
help
|
||||
Machine support for the Samsung Aquila target based on S5PC110 SoC
|
||||
|
||||
config MACH_GONI
|
||||
bool "GONI"
|
||||
select CPU_S5PV210
|
||||
select S5P_GPIO_INT
|
||||
select S3C_DEV_FB
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
select S3C_DEV_I2C1
|
||||
select S3C_DEV_I2C2
|
||||
select S5P_DEV_MFC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S5P_DEV_ONENAND
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
select S5P_DEV_TV
|
||||
select S5PV210_SETUP_FB_24BPP
|
||||
select S5PV210_SETUP_FIMC
|
||||
select S5PV210_SETUP_I2C1
|
||||
select S5PV210_SETUP_I2C2
|
||||
select S5PV210_SETUP_KEYPAD
|
||||
select S5PV210_SETUP_SDHCI
|
||||
select S5PV210_SETUP_FIMC
|
||||
select S5PV210_SETUP_USB_PHY
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_MFC
|
||||
select S5P_DEV_ONENAND
|
||||
select S5P_DEV_TV
|
||||
select S5P_GPIO_INT
|
||||
select SAMSUNG_DEV_KEYPAD
|
||||
help
|
||||
Machine support for Samsung GONI board
|
||||
S5PC110(MCP) is one of package option of S5PV210
|
||||
|
@ -125,14 +125,14 @@ config MACH_SMDKC110
|
|||
select S3C_DEV_I2C2
|
||||
select S3C_DEV_RTC
|
||||
select S3C_DEV_WDT
|
||||
select S5PV210_SETUP_I2C1
|
||||
select S5PV210_SETUP_I2C2
|
||||
select S5PV210_SETUP_IDE
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
select S5P_DEV_MFC
|
||||
select SAMSUNG_DEV_IDE
|
||||
select S5PV210_SETUP_I2C1
|
||||
select S5PV210_SETUP_I2C2
|
||||
select S5PV210_SETUP_IDE
|
||||
help
|
||||
Machine support for Samsung SMDKC110
|
||||
S5PC110(MCP) is one of package option of S5PV210
|
||||
|
@ -154,6 +154,13 @@ config MACH_SMDKV210
|
|||
select S3C_DEV_RTC
|
||||
select S3C_DEV_USB_HSOTG
|
||||
select S3C_DEV_WDT
|
||||
select S5PV210_SETUP_FB_24BPP
|
||||
select S5PV210_SETUP_I2C1
|
||||
select S5PV210_SETUP_I2C2
|
||||
select S5PV210_SETUP_IDE
|
||||
select S5PV210_SETUP_KEYPAD
|
||||
select S5PV210_SETUP_SDHCI
|
||||
select S5PV210_SETUP_USB_PHY
|
||||
select S5P_DEV_FIMC0
|
||||
select S5P_DEV_FIMC1
|
||||
select S5P_DEV_FIMC2
|
||||
|
@ -165,20 +172,13 @@ config MACH_SMDKV210
|
|||
select SAMSUNG_DEV_KEYPAD
|
||||
select SAMSUNG_DEV_PWM
|
||||
select SAMSUNG_DEV_TS
|
||||
select S5PV210_SETUP_FB_24BPP
|
||||
select S5PV210_SETUP_I2C1
|
||||
select S5PV210_SETUP_I2C2
|
||||
select S5PV210_SETUP_IDE
|
||||
select S5PV210_SETUP_KEYPAD
|
||||
select S5PV210_SETUP_SDHCI
|
||||
select S5PV210_SETUP_USB_PHY
|
||||
help
|
||||
Machine support for Samsung SMDKV210
|
||||
|
||||
config MACH_TORBRECK
|
||||
bool "Torbreck"
|
||||
select CPU_S5PV210
|
||||
select ARCH_SPARSEMEM_ENABLE
|
||||
select CPU_S5PV210
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_HSMMC2
|
||||
|
|
|
@ -49,15 +49,15 @@ config SA1100_COLLIE
|
|||
bool "Sharp Zaurus SL5500"
|
||||
# FIXME: select CPU_FREQ_SA11x0
|
||||
select SHARP_LOCOMO
|
||||
select SHARP_SCOOP
|
||||
select SHARP_PARAM
|
||||
select SHARP_SCOOP
|
||||
help
|
||||
Say Y here to support the Sharp Zaurus SL5500 PDAs.
|
||||
|
||||
config SA1100_H3100
|
||||
bool "Compaq iPAQ H3100"
|
||||
select HTC_EGPIO
|
||||
select CPU_FREQ_SA1110
|
||||
select HTC_EGPIO
|
||||
help
|
||||
Say Y here if you intend to run this kernel on the Compaq iPAQ
|
||||
H3100 handheld computer. Information about this machine and the
|
||||
|
@ -67,8 +67,8 @@ config SA1100_H3100
|
|||
|
||||
config SA1100_H3600
|
||||
bool "Compaq iPAQ H3600/H3700"
|
||||
select HTC_EGPIO
|
||||
select CPU_FREQ_SA1110
|
||||
select HTC_EGPIO
|
||||
help
|
||||
Say Y here if you intend to run this kernel on the Compaq iPAQ
|
||||
H3600 handheld computer. Information about this machine and the
|
||||
|
@ -78,16 +78,16 @@ config SA1100_H3600
|
|||
|
||||
config SA1100_BADGE4
|
||||
bool "HP Labs BadgePAD 4"
|
||||
select SA1111
|
||||
select CPU_FREQ_SA1100
|
||||
select SA1111
|
||||
help
|
||||
Say Y here if you want to build a kernel for the HP Laboratories
|
||||
BadgePAD 4.
|
||||
|
||||
config SA1100_JORNADA720
|
||||
bool "HP Jornada 720"
|
||||
select SA1111
|
||||
# FIXME: select CPU_FREQ_SA11x0
|
||||
select SA1111
|
||||
help
|
||||
Say Y here if you want to build a kernel for the HP Jornada 720
|
||||
handheld computer. See
|
||||
|
@ -95,8 +95,8 @@ config SA1100_JORNADA720
|
|||
|
||||
config SA1100_JORNADA720_SSP
|
||||
bool "HP Jornada 720 Extended SSP driver"
|
||||
select SA1100_SSP
|
||||
depends on SA1100_JORNADA720
|
||||
select SA1100_SSP
|
||||
help
|
||||
Say Y here if you have a HP Jornada 7xx handheld computer and you
|
||||
want to access devices connected to the MCU. Those include the
|
||||
|
|
|
@ -4,49 +4,49 @@ comment "SH-Mobile System Type"
|
|||
|
||||
config ARCH_SH7367
|
||||
bool "SH-Mobile G3 (SH7367)"
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select CPU_V6
|
||||
select SH_CLK_CPG
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
|
||||
config ARCH_SH7377
|
||||
bool "SH-Mobile G4 (SH7377)"
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
|
||||
config ARCH_SH7372
|
||||
bool "SH-Mobile AP4 (SH7372)"
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select ARM_CPU_SUSPEND if PM || CPU_IDLE
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
|
||||
config ARCH_SH73A0
|
||||
bool "SH-Mobile AG5 (R8A73A00)"
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select I2C
|
||||
select SH_CLK_CPG
|
||||
|
||||
config ARCH_R8A7740
|
||||
bool "R-Mobile A1 (R8A77400)"
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
|
||||
config ARCH_R8A7779
|
||||
bool "R-Car H1 (R8A77790)"
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select SH_CLK_CPG
|
||||
select ARM_GIC
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
|
||||
config ARCH_EMEV2
|
||||
bool "Emma Mobile EV2"
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select ARCH_WANT_OPTIONAL_GPIOLIB
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
|
||||
comment "SH-Mobile Board Type"
|
||||
|
||||
|
@ -65,9 +65,9 @@ config MACH_AP4EVB
|
|||
bool "AP4EVB board"
|
||||
depends on ARCH_SH7372
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SH_LCD_MIPI_DSI
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
|
||||
choice
|
||||
prompt "AP4EVB LCD panel selection"
|
||||
|
@ -84,37 +84,37 @@ endchoice
|
|||
|
||||
config MACH_AG5EVM
|
||||
bool "AG5EVM board"
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select SH_LCD_MIPI_DSI
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
depends on ARCH_SH73A0
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SH_LCD_MIPI_DSI
|
||||
|
||||
config MACH_MACKEREL
|
||||
bool "mackerel board"
|
||||
depends on ARCH_SH7372
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
|
||||
config MACH_KOTA2
|
||||
bool "KOTA2 board"
|
||||
depends on ARCH_SH73A0
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
depends on ARCH_SH73A0
|
||||
|
||||
config MACH_BONITO
|
||||
bool "bonito board"
|
||||
depends on ARCH_R8A7740
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
depends on ARCH_R8A7740
|
||||
|
||||
config MACH_ARMADILLO800EVA
|
||||
bool "Armadillo-800 EVA board"
|
||||
depends on ARCH_R8A7740
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select USE_OF
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SND_SOC_WM8978 if SND_SIMPLE_CARD
|
||||
select USE_OF
|
||||
|
||||
config MACH_MARZEN
|
||||
bool "MARZEN board"
|
||||
|
@ -125,16 +125,16 @@ config MACH_MARZEN
|
|||
config MACH_KZM9D
|
||||
bool "KZM9D board"
|
||||
depends on ARCH_EMEV2
|
||||
select USE_OF
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select USE_OF
|
||||
|
||||
config MACH_KZM9G
|
||||
bool "KZM-A9-GT board"
|
||||
depends on ARCH_SH73A0
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select USE_OF
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
select REGULATOR_FIXED_VOLTAGE if REGULATOR
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
select USE_OF
|
||||
|
||||
comment "SH-Mobile System Configuration"
|
||||
|
||||
|
|
|
@ -4,42 +4,42 @@ comment "NVIDIA Tegra options"
|
|||
|
||||
config ARCH_TEGRA_2x_SOC
|
||||
bool "Enable support for Tegra20 family"
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select PINCTRL
|
||||
select PINCTRL_TEGRA20
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select USB_ULPI if USB
|
||||
select USB_ULPI_VIEWPORT if USB_SUPPORT
|
||||
select ARM_ERRATA_720789
|
||||
select ARM_ERRATA_742230
|
||||
select ARM_ERRATA_751472
|
||||
select ARM_ERRATA_754327
|
||||
select ARM_ERRATA_764369 if SMP
|
||||
select ARM_GIC
|
||||
select CPU_FREQ_TABLE if CPU_FREQ
|
||||
select CPU_V7
|
||||
select PINCTRL
|
||||
select PINCTRL_TEGRA20
|
||||
select PL310_ERRATA_727915 if CACHE_L2X0
|
||||
select PL310_ERRATA_769419 if CACHE_L2X0
|
||||
select CPU_FREQ_TABLE if CPU_FREQ
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select USB_ULPI if USB
|
||||
select USB_ULPI_VIEWPORT if USB_SUPPORT
|
||||
help
|
||||
Support for NVIDIA Tegra AP20 and T20 processors, based on the
|
||||
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
|
||||
|
||||
config ARCH_TEGRA_3x_SOC
|
||||
bool "Enable support for Tegra30 family"
|
||||
select CPU_V7
|
||||
select ARM_GIC
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select PINCTRL
|
||||
select PINCTRL_TEGRA30
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select USB_ULPI if USB
|
||||
select USB_ULPI_VIEWPORT if USB_SUPPORT
|
||||
select ARM_ERRATA_743622
|
||||
select ARM_ERRATA_751472
|
||||
select ARM_ERRATA_754322
|
||||
select ARM_ERRATA_764369 if SMP
|
||||
select PL310_ERRATA_769419 if CACHE_L2X0
|
||||
select ARM_GIC
|
||||
select CPU_FREQ_TABLE if CPU_FREQ
|
||||
select CPU_V7
|
||||
select PINCTRL
|
||||
select PINCTRL_TEGRA30
|
||||
select PL310_ERRATA_769419 if CACHE_L2X0
|
||||
select USB_ARCH_HAS_EHCI if USB_SUPPORT
|
||||
select USB_ULPI if USB
|
||||
select USB_ULPI_VIEWPORT if USB_SUPPORT
|
||||
help
|
||||
Support for NVIDIA Tegra T30 processor family, based on the
|
||||
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
|
||||
|
|
|
@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products"
|
|||
config MACH_U300
|
||||
bool "U300"
|
||||
select PINCTRL
|
||||
select PINCTRL_U300
|
||||
select PINCTRL_COH901
|
||||
select PINCTRL_U300
|
||||
|
||||
comment "ST-Ericsson U300/U335 Feature Selections"
|
||||
|
||||
|
|
|
@ -3,33 +3,33 @@ if ARCH_U8500
|
|||
config UX500_SOC_COMMON
|
||||
bool
|
||||
default y
|
||||
select ARM_GIC
|
||||
select HAS_MTU
|
||||
select PL310_ERRATA_753970 if CACHE_PL310
|
||||
select ARM_ERRATA_754322
|
||||
select ARM_ERRATA_764369 if SMP
|
||||
select ARM_GIC
|
||||
select CACHE_L2X0
|
||||
select COMMON_CLK
|
||||
select HAS_MTU
|
||||
select PINCTRL
|
||||
select PINCTRL_NOMADIK
|
||||
select COMMON_CLK
|
||||
select PL310_ERRATA_753970 if CACHE_PL310
|
||||
|
||||
config UX500_SOC_DB8500
|
||||
bool
|
||||
select CPU_FREQ_TABLE if CPU_FREQ
|
||||
select MFD_DB8500_PRCMU
|
||||
select PINCTRL_DB8500
|
||||
select REGULATOR
|
||||
select REGULATOR_DB8500_PRCMU
|
||||
select CPU_FREQ_TABLE if CPU_FREQ
|
||||
select PINCTRL_DB8500
|
||||
|
||||
menu "Ux500 target platform (boards)"
|
||||
|
||||
config MACH_MOP500
|
||||
bool "U8500 Development platform, MOP500 versions"
|
||||
select UX500_SOC_DB8500
|
||||
select I2C
|
||||
select I2C_NOMADIK
|
||||
select SOC_BUS
|
||||
select REGULATOR_FIXED_VOLTAGE
|
||||
select SOC_BUS
|
||||
select UX500_SOC_DB8500
|
||||
help
|
||||
Include support for the MOP500 development platform.
|
||||
|
||||
|
|
|
@ -3,9 +3,9 @@ menu "Versatile platform type"
|
|||
|
||||
config ARCH_VERSATILE_PB
|
||||
bool "Support Versatile Platform Baseboard for ARM926EJ-S"
|
||||
default y
|
||||
select CPU_ARM926T
|
||||
select MIGHT_HAVE_PCI
|
||||
default y
|
||||
help
|
||||
Include support for the ARM(R) Versatile Platform Baseboard
|
||||
for the ARM926EJ-S.
|
||||
|
@ -19,8 +19,8 @@ config MACH_VERSATILE_AB
|
|||
|
||||
config MACH_VERSATILE_DT
|
||||
bool "Support Versatile platform from device tree"
|
||||
select USE_OF
|
||||
select CPU_ARM926T
|
||||
select USE_OF
|
||||
help
|
||||
Include support for the ARM(R) Versatile/PB platform,
|
||||
using the device tree for discovery
|
||||
|
|
|
@ -10,8 +10,8 @@ config CPU_ARM7TDMI
|
|||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
A 32-bit RISC microprocessor based on the ARM7 processor core
|
||||
which has no memory control unit and cache.
|
||||
|
@ -24,11 +24,11 @@ config CPU_ARM720T
|
|||
bool "Support ARM720T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WT if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WT if MMU
|
||||
help
|
||||
A 32-bit RISC processor with 8kByte Cache, Write Buffer and
|
||||
|
@ -43,9 +43,9 @@ config CPU_ARM740T
|
|||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_LV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V3 # although the core is v4t
|
||||
select CPU_CP15_MPU
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
A 32-bit RISC processor with 8KB cache or 4KB variants,
|
||||
write buffer and MPU(Protection Unit) built around
|
||||
|
@ -60,8 +60,8 @@ config CPU_ARM9TDMI
|
|||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
A 32-bit RISC microprocessor based on the ARM9 processor core
|
||||
which has no memory control unit and cache.
|
||||
|
@ -74,11 +74,11 @@ config CPU_ARM920T
|
|||
bool "Support ARM920T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM920T is licensed to be produced by numerous vendors,
|
||||
|
@ -92,11 +92,11 @@ config CPU_ARM922T
|
|||
bool "Support ARM922T processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM922T is a version of the ARM920T, but with smaller
|
||||
|
@ -111,11 +111,11 @@ config CPU_ARM925T
|
|||
bool "Support ARM925T processor" if ARCH_OMAP1
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM925T is a mix between the ARM920T and ARM926T, but with
|
||||
|
@ -130,10 +130,10 @@ config CPU_ARM926T
|
|||
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5TJ
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
This is a variant of the ARM920. It has slightly different
|
||||
|
@ -148,11 +148,11 @@ config CPU_FA526
|
|||
bool
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_CACHE_FA
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_COPY_FA if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_FA if MMU
|
||||
help
|
||||
The FA526 is a version of the ARMv4 compatible processor with
|
||||
|
@ -167,9 +167,9 @@ config CPU_ARM940T
|
|||
depends on !MMU
|
||||
select CPU_32v4T
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MPU
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
ARM940T is a member of the ARM9TDMI family of general-
|
||||
purpose microprocessors with MPU and separate 4KB
|
||||
|
@ -185,9 +185,9 @@ config CPU_ARM946E
|
|||
depends on !MMU
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_NOMMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MPU
|
||||
select CPU_PABRT_LEGACY
|
||||
help
|
||||
ARM946E-S is a member of the ARM9E-S family of high-
|
||||
performance, 32-bit system-on-chip processor solutions.
|
||||
|
@ -201,11 +201,11 @@ config CPU_ARM1020
|
|||
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM1020 is the 32K cached version of the ARM10 processor,
|
||||
|
@ -217,25 +217,25 @@ config CPU_ARM1020
|
|||
# ARM1020E - needs validating
|
||||
config CPU_ARM1020E
|
||||
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
|
||||
depends on n
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WT
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
depends on n
|
||||
|
||||
# ARM1022E
|
||||
config CPU_ARM1022
|
||||
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV4T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU # can probably do better
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM1022E is an implementation of the ARMv5TE architecture
|
||||
|
@ -250,10 +250,10 @@ config CPU_ARM1026
|
|||
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU # can probably do better
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
help
|
||||
The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
|
||||
|
@ -268,11 +268,11 @@ config CPU_SA110
|
|||
select CPU_32v3 if ARCH_RPC
|
||||
select CPU_32v4 if !ARCH_RPC
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WB
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WB if MMU
|
||||
help
|
||||
The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
|
||||
|
@ -288,10 +288,10 @@ config CPU_SA1100
|
|||
bool
|
||||
select CPU_32v4
|
||||
select CPU_ABRT_EV4
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_V4WB
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WB if MMU
|
||||
|
||||
# XScale
|
||||
|
@ -299,9 +299,9 @@ config CPU_XSCALE
|
|||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
|
||||
# XScale Core Version 3
|
||||
|
@ -309,9 +309,9 @@ config CPU_XSC3
|
|||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
select IO_36
|
||||
|
||||
|
@ -320,21 +320,21 @@ config CPU_MOHAWK
|
|||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
select CPU_COPY_V4WB if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_V4WBI if MMU
|
||||
|
||||
# Feroceon
|
||||
config CPU_FEROCEON
|
||||
bool
|
||||
select CPU_32v5
|
||||
select CPU_ABRT_EV5T
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_CACHE_VIVT
|
||||
select CPU_CP15_MMU
|
||||
select CPU_COPY_FEROCEON if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_PABRT_LEGACY
|
||||
select CPU_TLB_FEROCEON if MMU
|
||||
|
||||
config CPU_FEROCEON_OLD_ID
|
||||
|
@ -349,20 +349,20 @@ config CPU_FEROCEON_OLD_ID
|
|||
# Marvell PJ4
|
||||
config CPU_PJ4
|
||||
bool
|
||||
select CPU_V7
|
||||
select ARM_THUMBEE
|
||||
select CPU_V7
|
||||
|
||||
# ARMv6
|
||||
config CPU_V6
|
||||
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
|
||||
select CPU_32v6
|
||||
select CPU_ABRT_EV6
|
||||
select CPU_PABRT_V6
|
||||
select CPU_CACHE_V6
|
||||
select CPU_CACHE_VIPT
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_HAS_ASID if MMU
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_PABRT_V6
|
||||
select CPU_TLB_V6 if MMU
|
||||
|
||||
# ARMv6k
|
||||
|
@ -371,12 +371,12 @@ config CPU_V6K
|
|||
select CPU_32v6
|
||||
select CPU_32v6K
|
||||
select CPU_ABRT_EV6
|
||||
select CPU_PABRT_V6
|
||||
select CPU_CACHE_V6
|
||||
select CPU_CACHE_VIPT
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_HAS_ASID if MMU
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_PABRT_V6
|
||||
select CPU_TLB_V6 if MMU
|
||||
|
||||
# ARMv7
|
||||
|
@ -385,44 +385,44 @@ config CPU_V7
|
|||
select CPU_32v6K
|
||||
select CPU_32v7
|
||||
select CPU_ABRT_EV7
|
||||
select CPU_PABRT_V7
|
||||
select CPU_CACHE_V7
|
||||
select CPU_CACHE_VIPT
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_CP15_MMU
|
||||
select CPU_HAS_ASID if MMU
|
||||
select CPU_COPY_V6 if MMU
|
||||
select CPU_PABRT_V7
|
||||
select CPU_TLB_V7 if MMU
|
||||
|
||||
# Figure out what processor architecture version we should be using.
|
||||
# This defines the compiler instruction set which depends on the machine type.
|
||||
config CPU_32v3
|
||||
bool
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select CPU_USE_DOMAINS if MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
|
||||
config CPU_32v4
|
||||
bool
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select CPU_USE_DOMAINS if MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
|
||||
config CPU_32v4T
|
||||
bool
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select CPU_USE_DOMAINS if MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
|
||||
config CPU_32v5
|
||||
bool
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select CPU_USE_DOMAINS if MMU
|
||||
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
|
||||
select TLS_REG_EMUL if SMP || !MMU
|
||||
|
||||
config CPU_32v6
|
||||
bool
|
||||
select TLS_REG_EMUL if !CPU_32v6K && !MMU
|
||||
select CPU_USE_DOMAINS if CPU_V6 && MMU
|
||||
select TLS_REG_EMUL if !CPU_32v6K && !MMU
|
||||
|
||||
config CPU_32v6K
|
||||
bool
|
||||
|
@ -644,8 +644,8 @@ config ARM_VIRT_EXT
|
|||
config SWP_EMULATE
|
||||
bool "Emulate SWP/SWPB instructions"
|
||||
depends on !CPU_USE_DOMAINS && CPU_V7
|
||||
select HAVE_PROC_CPU if PROC_FS
|
||||
default y if SMP
|
||||
select HAVE_PROC_CPU if PROC_FS
|
||||
help
|
||||
ARMv6 architecture deprecates use of the SWP/SWPB instructions.
|
||||
ARMv7 multiprocessing extensions introduce the ability to disable
|
||||
|
|
|
@ -10,16 +10,16 @@ choice
|
|||
|
||||
config ARCH_IMX_V4_V5
|
||||
bool "i.MX1, i.MX21, i.MX25, i.MX27"
|
||||
select AUTO_ZRELADDR if !ZBOOT_ROM
|
||||
select ARM_PATCH_PHYS_VIRT
|
||||
select AUTO_ZRELADDR if !ZBOOT_ROM
|
||||
help
|
||||
This enables support for systems based on the Freescale i.MX ARMv4
|
||||
and ARMv5 SoCs
|
||||
|
||||
config ARCH_IMX_V6_V7
|
||||
bool "i.MX3, i.MX5, i.MX6"
|
||||
select AUTO_ZRELADDR if !ZBOOT_ROM
|
||||
select ARM_PATCH_PHYS_VIRT
|
||||
select AUTO_ZRELADDR if !ZBOOT_ROM
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
help
|
||||
This enables support for systems based on the Freescale i.MX3, i.MX5
|
||||
|
|
|
@ -3,8 +3,8 @@ config IMX_HAVE_PLATFORM_FEC
|
|||
default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
|
||||
|
||||
config IMX_HAVE_PLATFORM_FLEXCAN
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
bool
|
||||
select HAVE_CAN_FLEXCAN if CAN
|
||||
|
||||
config IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
||||
bool
|
||||
|
|
|
@ -5,8 +5,8 @@
|
|||
config PLAT_NOMADIK
|
||||
bool
|
||||
depends on ARCH_NOMADIK || ARCH_U8500
|
||||
select CLKSRC_MMIO
|
||||
default y
|
||||
select CLKSRC_MMIO
|
||||
help
|
||||
Common platform code for Nomadik and other ST-Ericsson
|
||||
platforms.
|
||||
|
|
|
@ -14,10 +14,10 @@ config ARCH_OMAP1
|
|||
select CLKDEV_LOOKUP
|
||||
select CLKSRC_MMIO
|
||||
select GENERIC_IRQ_CHIP
|
||||
select IRQ_DOMAIN
|
||||
select HAVE_IDE
|
||||
select NEED_MACH_MEMORY_H
|
||||
select IRQ_DOMAIN
|
||||
select NEED_MACH_IO_H if PCCARD
|
||||
select NEED_MACH_MEMORY_H
|
||||
help
|
||||
"Systems based on omap7xx, omap15xx or omap16xx"
|
||||
|
||||
|
@ -25,10 +25,10 @@ config ARCH_OMAP2PLUS
|
|||
bool "TI OMAP2/3/4"
|
||||
select CLKDEV_LOOKUP
|
||||
select GENERIC_IRQ_CHIP
|
||||
select SPARSE_IRQ
|
||||
select OMAP_DM_TIMER
|
||||
select USE_OF
|
||||
select PROC_DEVICETREE if PROC_FS
|
||||
select SPARSE_IRQ
|
||||
select USE_OF
|
||||
help
|
||||
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
|
||||
|
||||
|
@ -43,8 +43,8 @@ config OMAP_DEBUG_DEVICES
|
|||
|
||||
config OMAP_DEBUG_LEDS
|
||||
def_bool y if NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
depends on OMAP_DEBUG_DEVICES
|
||||
select LEDS_CLASS
|
||||
|
||||
config POWER_AVS_OMAP
|
||||
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
|
||||
|
|
|
@ -6,8 +6,8 @@ config PLAT_S3C24XX
|
|||
bool
|
||||
depends on ARCH_S3C24XX
|
||||
default y
|
||||
select NO_IOPORT
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select NO_IOPORT
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Base platform code for any Samsung S3C24XX device
|
||||
|
|
|
@ -7,9 +7,9 @@
|
|||
config PLAT_SAMSUNG
|
||||
bool
|
||||
depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
|
||||
select NO_IOPORT
|
||||
select GENERIC_IRQ_CHIP
|
||||
default y
|
||||
select GENERIC_IRQ_CHIP
|
||||
select NO_IOPORT
|
||||
help
|
||||
Base platform code for all Samsung SoC based systems
|
||||
|
||||
|
@ -17,16 +17,16 @@ config PLAT_S5P
|
|||
bool
|
||||
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
|
||||
default y
|
||||
select ARM_VIC if !ARCH_EXYNOS
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select ARM_GIC if ARCH_EXYNOS
|
||||
select ARM_VIC if !ARCH_EXYNOS
|
||||
select GIC_NON_BANKED if ARCH_EXYNOS4
|
||||
select NO_IOPORT
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select PLAT_SAMSUNG
|
||||
select S3C_GPIO_TRACK
|
||||
select S5P_GPIO_DRVSTR
|
||||
select SAMSUNG_GPIOLIB_4BIT
|
||||
select PLAT_SAMSUNG
|
||||
select SAMSUNG_CLKSRC
|
||||
select SAMSUNG_GPIOLIB_4BIT
|
||||
select SAMSUNG_IRQ_VIC_TIMER
|
||||
help
|
||||
Base platform code for Samsung's S5P series SoC.
|
||||
|
@ -423,10 +423,10 @@ config S3C_DMA
|
|||
|
||||
config SAMSUNG_DMADEV
|
||||
bool
|
||||
select ARM_AMBA
|
||||
select DMADEVICES
|
||||
select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
|
||||
CPU_S5P6450 || CPU_S5P6440)
|
||||
select ARM_AMBA
|
||||
help
|
||||
Use DMA device engine for PL330 DMAC.
|
||||
|
||||
|
|
|
@ -12,10 +12,10 @@ config ARCH_SPEAR13XX
|
|||
bool "ST SPEAr13xx with Device Tree"
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select USE_OF
|
||||
select HAVE_SMP
|
||||
select MIGHT_HAVE_CACHE_L2X0
|
||||
select PINCTRL
|
||||
select USE_OF
|
||||
help
|
||||
Supports for ARM's SPEAR13XX family
|
||||
|
||||
|
@ -23,8 +23,8 @@ config ARCH_SPEAR3XX
|
|||
bool "ST SPEAr3xx with Device Tree"
|
||||
select ARM_VIC
|
||||
select CPU_ARM926T
|
||||
select USE_OF
|
||||
select PINCTRL
|
||||
select USE_OF
|
||||
help
|
||||
Supports for ARM's SPEAR3XX family
|
||||
|
||||
|
|
|
@ -15,6 +15,8 @@ config AVR32
|
|||
select ARCH_WANT_IPC_PARSE_VERSION
|
||||
select ARCH_HAVE_NMI_SAFE_CMPXCHG
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_RELA
|
||||
help
|
||||
AVR32 is a high-performance 32-bit RISC microprocessor core,
|
||||
designed for cost-sensitive embedded applications, with particular
|
||||
|
|
|
@ -1,6 +1,8 @@
|
|||
#ifndef __ASM_AVR32_MODULE_H
|
||||
#define __ASM_AVR32_MODULE_H
|
||||
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
struct mod_arch_syminfo {
|
||||
unsigned long got_offset;
|
||||
int got_initialized;
|
||||
|
@ -17,10 +19,6 @@ struct mod_arch_specific {
|
|||
struct mod_arch_syminfo *syminfo;
|
||||
};
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
|
||||
#define MODULE_PROC_FAMILY "AVR32v1"
|
||||
|
||||
#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
|
||||
|
|
|
@ -43,6 +43,8 @@ config BLACKFIN
|
|||
select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
|
||||
select GENERIC_SMP_IDLE_THREAD
|
||||
select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config GENERIC_CSUM
|
||||
def_bool y
|
||||
|
|
|
@ -7,9 +7,7 @@
|
|||
#ifndef _ASM_BFIN_MODULE_H
|
||||
#define _ASM_BFIN_MODULE_H
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
struct mod_arch_specific {
|
||||
Elf_Shdr *text_l1;
|
||||
|
|
|
@ -18,6 +18,7 @@ config C6X
|
|||
select OF_EARLY_FLATTREE
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select GENERIC_KERNEL_THREAD
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config MMU
|
||||
def_bool n
|
||||
|
|
|
@ -13,17 +13,7 @@
|
|||
#ifndef _ASM_C6X_MODULE_H
|
||||
#define _ASM_C6X_MODULE_H
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#define Elf_Addr Elf32_Addr
|
||||
#define Elf_Word Elf32_Word
|
||||
|
||||
/*
|
||||
* This file contains the C6x architecture specific module code.
|
||||
*/
|
||||
struct mod_arch_specific {
|
||||
};
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
struct loaded_sections {
|
||||
unsigned int new_vaddr;
|
||||
|
|
|
@ -48,6 +48,7 @@ config CRIS
|
|||
select GENERIC_IOMAP
|
||||
select GENERIC_SMP_IDLE_THREAD if ETRAX_ARCH_V32
|
||||
select GENERIC_CMOS_UPDATE
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config HZ
|
||||
int
|
||||
|
|
|
@ -10,3 +10,4 @@ header-y += sync_serial.h
|
|||
|
||||
generic-y += clkdev.h
|
||||
generic-y += exec.h
|
||||
generic-y += module.h
|
||||
|
|
|
@ -1,9 +0,0 @@
|
|||
#ifndef _ASM_CRIS_MODULE_H
|
||||
#define _ASM_CRIS_MODULE_H
|
||||
/* cris is simple */
|
||||
struct mod_arch_specific { };
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#endif /* _ASM_CRIS_MODULE_H */
|
|
@ -11,13 +11,7 @@
|
|||
#ifndef _ASM_MODULE_H
|
||||
#define _ASM_MODULE_H
|
||||
|
||||
struct mod_arch_specific
|
||||
{
|
||||
};
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
/*
|
||||
* Include the architecture version.
|
||||
|
|
|
@ -7,6 +7,7 @@ config H8300
|
|||
select ARCH_WANT_IPC_PARSE_VERSION
|
||||
select GENERIC_IRQ_SHOW
|
||||
select GENERIC_CPU_DEVICES
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config SYMBOL_PREFIX
|
||||
string
|
||||
|
|
|
@ -2,3 +2,4 @@ include include/asm-generic/Kbuild.asm
|
|||
|
||||
generic-y += clkdev.h
|
||||
generic-y += exec.h
|
||||
generic-y += module.h
|
||||
|
|
|
@ -1,11 +0,0 @@
|
|||
#ifndef _ASM_H8300_MODULE_H
|
||||
#define _ASM_H8300_MODULE_H
|
||||
/*
|
||||
* This file contains the H8/300 architecture specific module code.
|
||||
*/
|
||||
struct mod_arch_specific { };
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
|
||||
#endif /* _ASM_H8/300_MODULE_H */
|
|
@ -30,6 +30,7 @@ config HEXAGON
|
|||
select KTIME_SCALAR
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select GENERIC_CLOCKEVENTS_BROADCAST
|
||||
select MODULES_USE_ELF_RELA
|
||||
---help---
|
||||
Qualcomm Hexagon is a processor architecture designed for high
|
||||
performance and low power across a wide variety of applications.
|
||||
|
|
|
@ -40,6 +40,8 @@ config IA64
|
|||
select ARCH_THREAD_INFO_ALLOCATOR
|
||||
select ARCH_CLOCKSOURCE_DATA
|
||||
select GENERIC_TIME_VSYSCALL_OLD
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_RELA
|
||||
default y
|
||||
help
|
||||
The Itanium Processor Family is Intel's 64-bit successor to
|
||||
|
|
|
@ -1,6 +1,8 @@
|
|||
#ifndef _ASM_IA64_MODULE_H
|
||||
#define _ASM_IA64_MODULE_H
|
||||
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
/*
|
||||
* IA-64-specific support for kernel module loader.
|
||||
*
|
||||
|
@ -29,10 +31,6 @@ struct mod_arch_specific {
|
|||
unsigned int next_got_entry; /* index of next available got entry */
|
||||
};
|
||||
|
||||
#define Elf_Shdr Elf64_Shdr
|
||||
#define Elf_Sym Elf64_Sym
|
||||
#define Elf_Ehdr Elf64_Ehdr
|
||||
|
||||
#define MODULE_PROC_FAMILY "ia64"
|
||||
#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY \
|
||||
"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
|
||||
|
|
|
@ -14,6 +14,7 @@ config M32R
|
|||
select GENERIC_IRQ_SHOW
|
||||
select GENERIC_ATOMIC64
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config SBUS
|
||||
bool
|
||||
|
|
|
@ -2,3 +2,4 @@ include include/asm-generic/Kbuild.asm
|
|||
|
||||
generic-y += clkdev.h
|
||||
generic-y += exec.h
|
||||
generic-y += module.h
|
||||
|
|
|
@ -1,10 +0,0 @@
|
|||
#ifndef _ASM_M32R_MODULE_H
|
||||
#define _ASM_M32R_MODULE_H
|
||||
|
||||
struct mod_arch_specific { };
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
|
||||
#endif /* _ASM_M32R_MODULE_H */
|
|
@ -201,18 +201,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
|
|||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int apply_relocate(Elf32_Shdr *sechdrs,
|
||||
const char *strtab,
|
||||
unsigned int symindex,
|
||||
unsigned int relsec,
|
||||
struct module *me)
|
||||
{
|
||||
#if 0
|
||||
printk(KERN_ERR "module %s: REL RELOCATION unsupported\n",
|
||||
me->name);
|
||||
return -ENOEXEC;
|
||||
#endif
|
||||
return 0;
|
||||
|
||||
}
|
||||
|
|
|
@ -16,6 +16,9 @@ config M68K
|
|||
select ARCH_WANT_IPC_PARSE_VERSION
|
||||
select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
|
||||
select GENERIC_KERNEL_THREAD
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_REL
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config RWSEM_GENERIC_SPINLOCK
|
||||
bool
|
||||
|
|
|
@ -1,6 +1,8 @@
|
|||
#ifndef _ASM_M68K_MODULE_H
|
||||
#define _ASM_M68K_MODULE_H
|
||||
|
||||
#include <asm-generic/module.h>
|
||||
|
||||
enum m68k_fixup_type {
|
||||
m68k_fixup_memoffset,
|
||||
m68k_fixup_vnode_shift,
|
||||
|
@ -36,8 +38,4 @@ struct module;
|
|||
extern void module_fixup(struct module *mod, struct m68k_fixup_info *start,
|
||||
struct m68k_fixup_info *end);
|
||||
|
||||
#define Elf_Shdr Elf32_Shdr
|
||||
#define Elf_Sym Elf32_Sym
|
||||
#define Elf_Ehdr Elf32_Ehdr
|
||||
|
||||
#endif /* _ASM_M68K_MODULE_H */
|
||||
|
|
|
@ -25,6 +25,7 @@ config MICROBLAZE
|
|||
select GENERIC_CPU_DEVICES
|
||||
select GENERIC_ATOMIC64
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select MODULES_USE_ELF_RELA
|
||||
|
||||
config SWAP
|
||||
def_bool n
|
||||
|
|
|
@ -37,6 +37,9 @@ config MIPS
|
|||
select BUILDTIME_EXTABLE_SORT
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select GENERIC_CMOS_UPDATE
|
||||
select HAVE_MOD_ARCH_SPECIFIC
|
||||
select MODULES_USE_ELF_REL
|
||||
select MODULES_USE_ELF_RELA if 64BIT
|
||||
|
||||
menu "Machine selection"
|
||||
|
||||
|
@ -1928,6 +1931,7 @@ config MIPS_MT_SMP
|
|||
select SYS_SUPPORTS_SCHED_SMT if SMP
|
||||
select SYS_SUPPORTS_SMP
|
||||
select SMP_UP
|
||||
select MIPS_PERF_SHARED_TC_COUNTERS
|
||||
help
|
||||
This is a kernel model which is known a VSMP but lately has been
|
||||
marketesed into SMVP.
|
||||
|
@ -2038,16 +2042,6 @@ config MIPS_VPE_APSP_API
|
|||
depends on MIPS_VPE_LOADER
|
||||
help
|
||||
|
||||
config MIPS_APSP_KSPD
|
||||
bool "Enable KSPD"
|
||||
depends on MIPS_VPE_APSP_API
|
||||
default y
|
||||
help
|
||||
KSPD is a kernel daemon that accepts syscall requests from the SP
|
||||
side, actions them and returns the results. It also handles the
|
||||
"exit" syscall notifying other kernel modules the SP program is
|
||||
exiting. You probably want to say yes here.
|
||||
|
||||
config MIPS_CMP
|
||||
bool "MIPS CMP framework support"
|
||||
depends on SYS_SUPPORTS_MIPS_CMP
|
||||
|
@ -2277,6 +2271,9 @@ config NR_CPUS
|
|||
performance should round up your number of processors to the next
|
||||
power of two.
|
||||
|
||||
config MIPS_PERF_SHARED_TC_COUNTERS
|
||||
bool
|
||||
|
||||
#
|
||||
# Timer Interrupt Frequency Configuration
|
||||
#
|
||||
|
|
|
@ -27,7 +27,7 @@ config MIPS_MTX1
|
|||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_DB1000
|
||||
bool "Alchemy DB1000/DB1500/DB1100 boards"
|
||||
bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
|
@ -36,57 +36,15 @@ config MIPS_DB1000
|
|||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_DB1200
|
||||
bool "Alchemy DB1200/PB1200 board"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
select DMA_COHERENT
|
||||
select MIPS_DISABLE_OBSOLETE_IDE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_DB1300
|
||||
bool "NetLogic DB1300 board"
|
||||
select ALCHEMY_GPIOINT_AU1300
|
||||
select DMA_COHERENT
|
||||
select MIPS_DISABLE_OBSOLETE_IDE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_DB1550
|
||||
bool "Alchemy DB1550 board"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
config MIPS_DB1235
|
||||
bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards"
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select HW_HAS_PCI
|
||||
select DMA_COHERENT
|
||||
select MIPS_DISABLE_OBSOLETE_IDE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_PB1100
|
||||
bool "Alchemy PB1100 board"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
select SWAP_IO_SPACE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_PB1500
|
||||
bool "Alchemy PB1500 board"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_PB1550
|
||||
bool "Alchemy PB1550 board"
|
||||
select ALCHEMY_GPIOINT_AU1000
|
||||
select DMA_NONCOHERENT
|
||||
select HW_HAS_PCI
|
||||
select MIPS_DISABLE_OBSOLETE_IDE
|
||||
select SYS_SUPPORTS_LITTLE_ENDIAN
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
|
||||
config MIPS_XXS1500
|
||||
bool "MyCable XXS1500 board"
|
||||
select DMA_NONCOHERENT
|
||||
|
|
|
@ -30,25 +30,11 @@ cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
|||
load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# AMD Alchemy Db1550 eval board
|
||||
# AMD Alchemy Db1200/Pb1200/Db1550/Db1300 eval boards
|
||||
#
|
||||
platform-$(CONFIG_MIPS_DB1550) += alchemy/devboards/
|
||||
cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
||||
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# AMD Alchemy Db1200/Pb1200 eval boards
|
||||
#
|
||||
platform-$(CONFIG_MIPS_DB1200) += alchemy/devboards/
|
||||
cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
||||
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# NetLogic DBAu1300 development platform
|
||||
#
|
||||
platform-$(CONFIG_MIPS_DB1300) += alchemy/devboards/
|
||||
cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
||||
load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000
|
||||
platform-$(CONFIG_MIPS_DB1235) += alchemy/devboards/
|
||||
cflags-$(CONFIG_MIPS_DB1235) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
||||
load-$(CONFIG_MIPS_DB1235) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# 4G-Systems MTX-1 "MeshCube" wireless router
|
||||
|
|
|
@ -4,10 +4,5 @@
|
|||
|
||||
obj-y += bcsr.o platform.o
|
||||
obj-$(CONFIG_PM) += pm.o
|
||||
obj-$(CONFIG_MIPS_PB1100) += pb1100.o
|
||||
obj-$(CONFIG_MIPS_PB1500) += pb1500.o
|
||||
obj-$(CONFIG_MIPS_PB1550) += pb1550.o
|
||||
obj-$(CONFIG_MIPS_DB1000) += db1000.o
|
||||
obj-$(CONFIG_MIPS_DB1200) += db1200.o
|
||||
obj-$(CONFIG_MIPS_DB1300) += db1300.o
|
||||
obj-$(CONFIG_MIPS_DB1550) += db1550.o
|
||||
obj-$(CONFIG_MIPS_DB1235) += db1235.o db1200.o db1300.o db1550.o
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* DBAu1000/1500/1100 board support
|
||||
* DBAu1000/1500/1100 PBAu1100/1500 board support
|
||||
*
|
||||
* Copyright 2000, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
|
@ -52,6 +52,11 @@ static const char *board_type_str(void)
|
|||
return "DB1500";
|
||||
case BCSR_WHOAMI_DB1100:
|
||||
return "DB1100";
|
||||
case BCSR_WHOAMI_PB1500:
|
||||
case BCSR_WHOAMI_PB1500R2:
|
||||
return "PB1500";
|
||||
case BCSR_WHOAMI_PB1100:
|
||||
return "PB1100";
|
||||
default:
|
||||
return "(unknown)";
|
||||
}
|
||||
|
@ -111,7 +116,9 @@ static struct platform_device db1500_pci_host_dev = {
|
|||
|
||||
static int __init db1500_pci_init(void)
|
||||
{
|
||||
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1500)
|
||||
int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
|
||||
if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) ||
|
||||
(id == BCSR_WHOAMI_PB1500R2))
|
||||
return platform_device_register(&db1500_pci_host_dev);
|
||||
return 0;
|
||||
}
|
||||
|
@ -199,27 +206,37 @@ static irqreturn_t db1100_mmc_cd(int irq, void *ptr)
|
|||
|
||||
static int db1100_mmc_cd_setup(void *mmc_host, int en)
|
||||
{
|
||||
int ret = 0;
|
||||
int ret = 0, irq;
|
||||
|
||||
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
|
||||
irq = AU1100_GPIO19_INT;
|
||||
else
|
||||
irq = AU1100_GPIO14_INT; /* PB1100 SD0 CD# */
|
||||
|
||||
if (en) {
|
||||
irq_set_irq_type(AU1100_GPIO19_INT, IRQ_TYPE_EDGE_BOTH);
|
||||
ret = request_irq(AU1100_GPIO19_INT, db1100_mmc_cd, 0,
|
||||
irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
|
||||
ret = request_irq(irq, db1100_mmc_cd, 0,
|
||||
"sd0_cd", mmc_host);
|
||||
} else
|
||||
free_irq(AU1100_GPIO19_INT, mmc_host);
|
||||
free_irq(irq, mmc_host);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int db1100_mmc1_cd_setup(void *mmc_host, int en)
|
||||
{
|
||||
int ret = 0;
|
||||
int ret = 0, irq;
|
||||
|
||||
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
|
||||
irq = AU1100_GPIO20_INT;
|
||||
else
|
||||
irq = AU1100_GPIO15_INT; /* PB1100 SD1 CD# */
|
||||
|
||||
if (en) {
|
||||
irq_set_irq_type(AU1100_GPIO20_INT, IRQ_TYPE_EDGE_BOTH);
|
||||
ret = request_irq(AU1100_GPIO20_INT, db1100_mmc_cd, 0,
|
||||
irq_set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
|
||||
ret = request_irq(irq, db1100_mmc_cd, 0,
|
||||
"sd1_cd", mmc_host);
|
||||
} else
|
||||
free_irq(AU1100_GPIO20_INT, mmc_host);
|
||||
free_irq(irq, mmc_host);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -236,11 +253,18 @@ static int db1100_mmc_card_inserted(void *mmc_host)
|
|||
|
||||
static void db1100_mmc_set_power(void *mmc_host, int state)
|
||||
{
|
||||
int bit;
|
||||
|
||||
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
|
||||
bit = BCSR_BOARD_SD0PWR;
|
||||
else
|
||||
bit = BCSR_BOARD_PB1100_SD0PWR;
|
||||
|
||||
if (state) {
|
||||
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
|
||||
bcsr_mod(BCSR_BOARD, 0, bit);
|
||||
msleep(400); /* stabilization time */
|
||||
} else
|
||||
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
|
||||
bcsr_mod(BCSR_BOARD, bit, 0);
|
||||
}
|
||||
|
||||
static void db1100_mmcled_set(struct led_classdev *led, enum led_brightness b)
|
||||
|
@ -267,11 +291,18 @@ static int db1100_mmc1_card_inserted(void *mmc_host)
|
|||
|
||||
static void db1100_mmc1_set_power(void *mmc_host, int state)
|
||||
{
|
||||
int bit;
|
||||
|
||||
if (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)) == BCSR_WHOAMI_DB1100)
|
||||
bit = BCSR_BOARD_SD1PWR;
|
||||
else
|
||||
bit = BCSR_BOARD_PB1100_SD1PWR;
|
||||
|
||||
if (state) {
|
||||
bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
|
||||
bcsr_mod(BCSR_BOARD, 0, bit);
|
||||
msleep(400); /* stabilization time */
|
||||
} else
|
||||
bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
|
||||
bcsr_mod(BCSR_BOARD, bit, 0);
|
||||
}
|
||||
|
||||
static void db1100_mmc1led_set(struct led_classdev *led, enum led_brightness b)
|
||||
|
@ -480,13 +511,12 @@ static struct platform_device *db1100_devs[] = {
|
|||
&db1100_mmc0_dev,
|
||||
&db1100_mmc1_dev,
|
||||
&db1000_irda_dev,
|
||||
&db1100_spi_dev,
|
||||
};
|
||||
|
||||
static int __init db1000_dev_init(void)
|
||||
{
|
||||
int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
|
||||
int c0, c1, d0, d1, s0, s1;
|
||||
int c0, c1, d0, d1, s0, s1, flashsize = 32, twosocks = 1;
|
||||
unsigned long pfc;
|
||||
|
||||
if (board == BCSR_WHOAMI_DB1500) {
|
||||
|
@ -522,6 +552,7 @@ static int __init db1000_dev_init(void)
|
|||
ARRAY_SIZE(db1100_spi_info));
|
||||
|
||||
platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
|
||||
platform_device_register(&db1100_spi_dev);
|
||||
} else if (board == BCSR_WHOAMI_DB1000) {
|
||||
c0 = AU1000_GPIO2_INT;
|
||||
c1 = AU1000_GPIO5_INT;
|
||||
|
@ -530,15 +561,42 @@ static int __init db1000_dev_init(void)
|
|||
s0 = AU1000_GPIO1_INT;
|
||||
s1 = AU1000_GPIO4_INT;
|
||||
platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
|
||||
} else if ((board == BCSR_WHOAMI_PB1500) ||
|
||||
(board == BCSR_WHOAMI_PB1500R2)) {
|
||||
c0 = AU1500_GPIO203_INT;
|
||||
d0 = AU1500_GPIO201_INT;
|
||||
s0 = AU1500_GPIO202_INT;
|
||||
twosocks = 0;
|
||||
flashsize = 64;
|
||||
/* RTC and daughtercard irqs */
|
||||
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
/* EPSON S1D13806 0x1b000000
|
||||
* SRAM 1MB/2MB 0x1a000000
|
||||
* DS1693 RTC 0x0c000000
|
||||
*/
|
||||
} else if (board == BCSR_WHOAMI_PB1100) {
|
||||
c0 = AU1100_GPIO11_INT;
|
||||
d0 = AU1100_GPIO9_INT;
|
||||
s0 = AU1100_GPIO10_INT;
|
||||
twosocks = 0;
|
||||
flashsize = 64;
|
||||
/* pendown, rtc, daughtercard irqs */
|
||||
irq_set_irq_type(AU1100_GPIO8_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1100_GPIO12_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1100_GPIO13_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
/* EPSON S1D13806 0x1b000000
|
||||
* SRAM 1MB/2MB 0x1a000000
|
||||
* DiskOnChip 0x0d000000
|
||||
* DS1693 RTC 0x0c000000
|
||||
*/
|
||||
platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
|
||||
} else
|
||||
return 0; /* unknown board, no further dev setup to do */
|
||||
|
||||
irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
|
||||
irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
|
||||
irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
db1x_register_pcmcia_socket(
|
||||
AU1000_PCMCIA_ATTR_PHYS_ADDR,
|
||||
|
@ -549,17 +607,23 @@ static int __init db1000_dev_init(void)
|
|||
AU1000_PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1,
|
||||
c0, d0, /*s0*/0, 0, 0);
|
||||
|
||||
db1x_register_pcmcia_socket(
|
||||
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
|
||||
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
|
||||
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
|
||||
c1, d1, /*s1*/0, 0, 1);
|
||||
if (twosocks) {
|
||||
irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
|
||||
irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
db1x_register_pcmcia_socket(
|
||||
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
|
||||
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1,
|
||||
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004000000,
|
||||
AU1000_PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1,
|
||||
c1, d1, /*s1*/0, 0, 1);
|
||||
}
|
||||
|
||||
platform_add_devices(db1x00_devs, ARRAY_SIZE(db1x00_devs));
|
||||
db1x_register_norflash(32 << 20, 4 /* 32bit */, F_SWAPPED);
|
||||
db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED);
|
||||
return 0;
|
||||
}
|
||||
device_initcall(db1000_dev_init);
|
||||
|
|
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user