ARM: OMAP: Trivial driver changes to remove include plat/cpu.h

Drivers should not use cpu_is_omap or cpu_class_is_omap macros,
they should be private to the platform init code. And we'll be
removing plat/cpu.h and only have a private soc.h for the
arch/arm/*omap* code.

This patch is intended as preparation for the core omap changes
and removes the need to include plat/cpu.h from several drivers.
This is needed for the ARM common zImage support.

These changes are OK to do because:

- omap-rng.c does not need plat/cpu.h

- omap-aes.c and omap-sham.c get the proper platform_data
  passed to them so they don't need extra checks in the driver

- omap-dma.c and omap-pcm.c can test the arch locally as
  omap1 and omap2 cannot be compiled together because of
  conflicting compiler flags

Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Venkatraman S <svenkatr@ti.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <djbw@fb.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
[tony@atomide.com: mmc changes folded in to an earlier patch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2012-10-15 16:24:23 -07:00
parent a656a06bbf
commit 27615a97b2
5 changed files with 14 additions and 20 deletions

View File

@ -27,8 +27,6 @@
#include <asm/io.h>
#include <plat/cpu.h>
#define RNG_OUT_REG 0x00 /* Output register */
#define RNG_STAT_REG 0x04 /* Status register
[0] = STAT_BUSY */

View File

@ -29,7 +29,6 @@
#include <crypto/scatterwalk.h>
#include <crypto/aes.h>
#include <plat/cpu.h>
#include <plat/dma.h>
/* OMAP TRM gives bitfields as start:end, where start is the higher bit
@ -941,11 +940,6 @@ static int __init omap_aes_mod_init(void)
{
pr_info("loading %s driver\n", "omap-aes");
if (!cpu_class_is_omap2() || omap_type() != OMAP2_DEVICE_TYPE_SEC) {
pr_err("Unsupported cpu\n");
return -ENODEV;
}
return platform_driver_register(&omap_aes_driver);
}

View File

@ -37,7 +37,6 @@
#include <crypto/hash.h>
#include <crypto/internal/hash.h>
#include <plat/cpu.h>
#include <plat/dma.h>
#include <mach/irqs.h>
@ -1289,13 +1288,6 @@ static int __init omap_sham_mod_init(void)
{
pr_info("loading %s driver\n", "omap-sham");
if (!cpu_class_is_omap2() ||
(omap_type() != OMAP2_DEVICE_TYPE_SEC &&
omap_type() != OMAP2_DEVICE_TYPE_EMU)) {
pr_err("Unsupported cpu\n");
return -ENODEV;
}
return platform_driver_register(&omap_sham_driver);
}

View File

@ -19,9 +19,14 @@
#include "virt-dma.h"
#include <plat/cpu.h>
#include <plat/dma.h>
#ifdef CONFIG_ARCH_OMAP2PLUS
#define dma_omap2plus() 1
#else
#define dma_omap2plus() 0
#endif
struct omap_dmadev {
struct dma_device ddev;
spinlock_t lock;
@ -438,7 +443,7 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
omap_disable_dma_irq(c->dma_ch, OMAP_DMA_BLOCK_IRQ);
}
if (!cpu_class_is_omap1()) {
if (dma_omap2plus()) {
omap_set_dma_src_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
omap_set_dma_dest_burst_mode(c->dma_ch, OMAP_DMA_DATA_BURST_16);
}

View File

@ -32,9 +32,14 @@
#include <sound/dmaengine_pcm.h>
#include <sound/soc.h>
#include <plat/cpu.h>
#include "omap-pcm.h"
#ifdef CONFIG_ARCH_OMAP1
#define pcm_omap1510() cpu_is_omap1510()
#else
#define pcm_omap1510() 0
#endif
static const struct snd_pcm_hardware omap_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
@ -159,7 +164,7 @@ static snd_pcm_uframes_t omap_pcm_pointer(struct snd_pcm_substream *substream)
{
snd_pcm_uframes_t offset;
if (cpu_is_omap1510())
if (pcm_omap1510())
offset = snd_dmaengine_pcm_pointer_no_residue(substream);
else
offset = snd_dmaengine_pcm_pointer(substream);