Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Cannot set clock gating under UMS
  drm/i915: Can't do accurate vblank timestamps with UMS
  Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
  drm/i915: split out PCH refclk update code
  drm/i915: show interrupt info on IVB
  drm/i915: Remove unused 'reg' argument to dp_pipe_enabled
  drm/i915: Fix PCH port pipe select in CPT disable paths
  drm/i915: Leave LVDS registers unlocked
  drm/i915: Wait for LVDS panel power sequence
This commit is contained in:
Linus Torvalds 2011-08-15 19:14:18 -07:00
commit 291b63c86a
11 changed files with 264 additions and 116 deletions

View File

@ -499,7 +499,7 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
seq_printf(m, "Interrupts received: %d\n",
atomic_read(&dev_priv->irq_received));
for (i = 0; i < I915_NUM_RINGS; i++) {
if (IS_GEN6(dev)) {
if (IS_GEN6(dev) || IS_GEN7(dev)) {
seq_printf(m, "Graphics Interrupt mask (%s): %08x\n",
dev_priv->ring[i].name,
I915_READ_IMR(&dev_priv->ring[i]));

View File

@ -36,6 +36,7 @@
#include <linux/io-mapping.h>
#include <linux/i2c.h>
#include <drm/intel-gtt.h>
#include <linux/backlight.h>
/* General customization:
*/
@ -690,6 +691,7 @@ typedef struct drm_i915_private {
int child_dev_num;
struct child_device_config *child_dev;
struct drm_connector *int_lvds_connector;
struct drm_connector *int_edp_connector;
bool mchbar_need_disable;
@ -723,6 +725,8 @@ typedef struct drm_i915_private {
/* list of fbdev register on this device */
struct intel_fbdev *fbdev;
struct backlight_device *backlight;
struct drm_property *broadcast_rgb_property;
struct drm_property *force_audio_property;

View File

@ -2058,8 +2058,10 @@ void intel_irq_init(struct drm_device *dev)
dev->driver->get_vblank_counter = gm45_get_vblank_counter;
}
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
if (drm_core_check_feature(dev, DRIVER_MODESET))
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
else
dev->driver->get_vblank_timestamp = NULL;
dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
if (IS_IVYBRIDGE(dev)) {

View File

@ -1318,6 +1318,7 @@
#define ADPA_PIPE_SELECT_MASK (1<<30)
#define ADPA_PIPE_A_SELECT 0
#define ADPA_PIPE_B_SELECT (1<<30)
#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
#define ADPA_USE_VGA_HVPOLARITY (1<<15)
#define ADPA_SETS_HVPOLARITY 0
#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
@ -1460,6 +1461,7 @@
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
#define LVDS_PIPE_MASK (1 << 30)
#define LVDS_PIPE(pipe) ((pipe) << 30)
/* LVDS dithering flag on 965/g4x platform */
#define LVDS_ENABLE_DITHER (1 << 25)
/* LVDS sync polarity flags. Set to invert (i.e. negative) */
@ -1499,9 +1501,6 @@
#define LVDS_B0B3_POWER_DOWN (0 << 2)
#define LVDS_B0B3_POWER_UP (3 << 2)
#define LVDS_PIPE_ENABLED(V, P) \
(((V) & (LVDS_PIPE_MASK | LVDS_PORT_EN)) == ((P) << 30 | LVDS_PORT_EN))
/* Video Data Island Packet control */
#define VIDEO_DIP_DATA 0x61178
#define VIDEO_DIP_CTL 0x61170
@ -3256,14 +3255,12 @@
#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17)
#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16)
#define ADPA_PIPE_ENABLED(V, P) \
(((V) & (ADPA_TRANS_SELECT_MASK | ADPA_DAC_ENABLE)) == ((P) << 30 | ADPA_DAC_ENABLE))
/* or SDVOB */
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
#define TRANSCODER_A (0)
#define TRANSCODER_B (1 << 30)
#define TRANSCODER(pipe) ((pipe) << 30)
#define TRANSCODER_MASK (1 << 30)
#define COLOR_FORMAT_8bpc (0)
#define COLOR_FORMAT_12bpc (3 << 26)
@ -3280,9 +3277,6 @@
#define HSYNC_ACTIVE_HIGH (1 << 3)
#define PORT_DETECTED (1 << 2)
#define HDMI_PIPE_ENABLED(V, P) \
(((V) & (TRANSCODER_MASK | PORT_ENABLE)) == ((P) << 30 | PORT_ENABLE))
/* PCH SDVOB multiplex with HDMIB */
#define PCH_SDVOB HDMIB
@ -3349,6 +3343,7 @@
#define PORT_TRANS_B_SEL_CPT (1<<29)
#define PORT_TRANS_C_SEL_CPT (2<<29)
#define PORT_TRANS_SEL_MASK (3<<29)
#define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29)
#define TRANS_DP_CTL_A 0xe0300
#define TRANS_DP_CTL_B 0xe1300

View File

@ -871,7 +871,8 @@ int i915_restore_state(struct drm_device *dev)
}
mutex_unlock(&dev->struct_mutex);
intel_init_clock_gating(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_init_clock_gating(dev);
if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);

View File

@ -980,8 +980,8 @@ static void assert_transcoder_disabled(struct drm_i915_private *dev_priv,
pipe_name(pipe));
}
static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum pipe pipe,
int reg, u32 port_sel, u32 val)
static bool dp_pipe_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe, u32 port_sel, u32 val)
{
if ((val & DP_PORT_EN) == 0)
return false;
@ -998,11 +998,58 @@ static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum pipe pipe,
return true;
}
static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe, u32 val)
{
if ((val & PORT_ENABLE) == 0)
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
return false;
} else {
if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
return false;
}
return true;
}
static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe, u32 val)
{
if ((val & LVDS_PORT_EN) == 0)
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
return false;
} else {
if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
return false;
}
return true;
}
static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
enum pipe pipe, u32 val)
{
if ((val & ADPA_DAC_ENABLE) == 0)
return false;
if (HAS_PCH_CPT(dev_priv->dev)) {
if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
return false;
} else {
if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
return false;
}
return true;
}
static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
WARN(dp_pipe_enabled(dev_priv, pipe, reg, port_sel, val),
WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
@ -1011,7 +1058,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
WARN(HDMI_PIPE_ENABLED(val, pipe),
WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
@ -1028,13 +1075,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
WARN(ADPA_PIPE_ENABLED(val, pipe),
WARN(adpa_pipe_enabled(dev_priv, val, pipe),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
WARN(LVDS_PIPE_ENABLED(val, pipe),
WARN(lvds_pipe_enabled(dev_priv, val, pipe),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
@ -1360,7 +1407,7 @@ static void disable_pch_dp(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
if (dp_pipe_enabled(dev_priv, pipe, reg, port_sel, val)) {
if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
I915_WRITE(reg, val & ~DP_PORT_EN);
}
@ -1370,7 +1417,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
if (HDMI_PIPE_ENABLED(val, pipe)) {
if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
reg, pipe);
I915_WRITE(reg, val & ~PORT_ENABLE);
@ -1392,12 +1439,13 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
if (ADPA_PIPE_ENABLED(val, pipe))
if (adpa_pipe_enabled(dev_priv, val, pipe))
I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
reg = PCH_LVDS;
val = I915_READ(reg);
if (LVDS_PIPE_ENABLED(val, pipe)) {
if (lvds_pipe_enabled(dev_priv, val, pipe)) {
DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
I915_WRITE(reg, val & ~LVDS_PORT_EN);
POSTING_READ(reg);
udelay(100);
@ -5049,6 +5097,81 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
return ret;
}
static void ironlake_update_pch_refclk(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_crtc *crtc;
struct intel_encoder *encoder;
struct intel_encoder *has_edp_encoder = NULL;
u32 temp;
bool has_lvds = false;
/* We need to take the global config into account */
list_for_each_entry(crtc, &mode_config->crtc_list, head) {
if (!crtc->enabled)
continue;
list_for_each_entry(encoder, &mode_config->encoder_list,
base.head) {
if (encoder->base.crtc != crtc)
continue;
switch (encoder->type) {
case INTEL_OUTPUT_LVDS:
has_lvds = true;
case INTEL_OUTPUT_EDP:
has_edp_encoder = encoder;
break;
}
}
}
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
* PCH B stepping, previous chipset stepping should be
* ignoring this setting.
*/
temp = I915_READ(PCH_DREF_CONTROL);
/* Always enable nonspread source */
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
temp |= DREF_NONSPREAD_SOURCE_ENABLE;
temp &= ~DREF_SSC_SOURCE_MASK;
temp |= DREF_SSC_SOURCE_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
if (has_edp_encoder) {
if (intel_panel_use_ssc(dev_priv)) {
temp |= DREF_SSC1_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Enable CPU source on CPU attached eDP */
if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
if (intel_panel_use_ssc(dev_priv))
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
else
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else {
/* Enable SSC on PCH eDP if needed */
if (intel_panel_use_ssc(dev_priv)) {
DRM_ERROR("enabling SSC on PCH\n");
temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
}
}
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
}
static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@ -5244,49 +5367,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
&m_n);
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
* PCH B stepping, previous chipset stepping should be
* ignoring this setting.
*/
temp = I915_READ(PCH_DREF_CONTROL);
/* Always enable nonspread source */
temp &= ~DREF_NONSPREAD_SOURCE_MASK;
temp |= DREF_NONSPREAD_SOURCE_ENABLE;
temp &= ~DREF_SSC_SOURCE_MASK;
temp |= DREF_SSC_SOURCE_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
if (has_edp_encoder) {
if (intel_panel_use_ssc(dev_priv)) {
temp |= DREF_SSC1_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
/* Enable CPU source on CPU attached eDP */
if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
if (intel_panel_use_ssc(dev_priv))
temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
else
temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
} else {
/* Enable SSC on PCH eDP if needed */
if (intel_panel_use_ssc(dev_priv)) {
DRM_ERROR("enabling SSC on PCH\n");
temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
}
}
I915_WRITE(PCH_DREF_CONTROL, temp);
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
ironlake_update_pch_refclk(dev);
fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)

View File

@ -1841,6 +1841,11 @@ intel_dp_set_property(struct drm_connector *connector,
static void
intel_dp_destroy (struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
if (intel_dpd_is_edp(dev))
intel_panel_destroy_backlight(dev);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
@ -2072,6 +2077,8 @@ intel_dp_init(struct drm_device *dev, int output_reg)
DRM_MODE_TYPE_PREFERRED;
}
}
dev_priv->int_edp_connector = connector;
intel_panel_setup_backlight(dev);
}
intel_dp_add_properties(intel_dp, connector);

View File

@ -297,9 +297,10 @@ extern void intel_pch_panel_fitting(struct drm_device *dev,
extern u32 intel_panel_get_max_backlight(struct drm_device *dev);
extern u32 intel_panel_get_backlight(struct drm_device *dev);
extern void intel_panel_set_backlight(struct drm_device *dev, u32 level);
extern void intel_panel_setup_backlight(struct drm_device *dev);
extern int intel_panel_setup_backlight(struct drm_device *dev);
extern void intel_panel_enable_backlight(struct drm_device *dev);
extern void intel_panel_disable_backlight(struct drm_device *dev);
extern void intel_panel_destroy_backlight(struct drm_device *dev);
extern enum drm_connector_status intel_panel_detect(struct drm_device *dev);
extern void intel_crtc_load_lut(struct drm_crtc *crtc);

View File

@ -72,14 +72,16 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 ctl_reg, lvds_reg;
u32 ctl_reg, lvds_reg, stat_reg;
if (HAS_PCH_SPLIT(dev)) {
ctl_reg = PCH_PP_CONTROL;
lvds_reg = PCH_LVDS;
stat_reg = PCH_PP_STATUS;
} else {
ctl_reg = PP_CONTROL;
lvds_reg = LVDS;
stat_reg = PP_STATUS;
}
I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
@ -94,17 +96,16 @@ static void intel_lvds_enable(struct intel_lvds *intel_lvds)
DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
intel_lvds->pfit_control,
intel_lvds->pfit_pgm_ratios);
if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
DRM_ERROR("timed out waiting for panel to power off\n");
} else {
I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
POSTING_READ(lvds_reg);
if (wait_for((I915_READ(stat_reg) & PP_ON) != 0, 1000))
DRM_ERROR("timed out waiting for panel to power on\n");
intel_panel_enable_backlight(dev);
}
@ -113,24 +114,25 @@ static void intel_lvds_disable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 ctl_reg, lvds_reg;
u32 ctl_reg, lvds_reg, stat_reg;
if (HAS_PCH_SPLIT(dev)) {
ctl_reg = PCH_PP_CONTROL;
lvds_reg = PCH_LVDS;
stat_reg = PCH_PP_STATUS;
} else {
ctl_reg = PP_CONTROL;
lvds_reg = LVDS;
stat_reg = PP_STATUS;
}
intel_panel_disable_backlight(dev);
I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
if (wait_for((I915_READ(stat_reg) & PP_ON) == 0, 1000))
DRM_ERROR("timed out waiting for panel to power off\n");
if (intel_lvds->pfit_control) {
if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
DRM_ERROR("timed out waiting for panel to power off\n");
I915_WRITE(PFIT_CONTROL, 0);
intel_lvds->pfit_dirty = true;
}
@ -398,53 +400,21 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
static void intel_lvds_prepare(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
/* We try to do the minimum that is necessary in order to unlock
* the registers for mode setting.
*
* On Ironlake, this is quite simple as we just set the unlock key
* and ignore all subtleties. (This may cause some issues...)
*
/*
* Prior to Ironlake, we must disable the pipe if we want to adjust
* the panel fitter. However at all other times we can just reset
* the registers regardless.
*/
if (HAS_PCH_SPLIT(dev)) {
I915_WRITE(PCH_PP_CONTROL,
I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
} else if (intel_lvds->pfit_dirty) {
I915_WRITE(PP_CONTROL,
(I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS)
& ~POWER_TARGET_ON);
} else {
I915_WRITE(PP_CONTROL,
I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
}
if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty)
intel_lvds_disable(intel_lvds);
}
static void intel_lvds_commit(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
/* Undo any unlocking done in prepare to prevent accidental
* adjustment of the registers.
*/
if (HAS_PCH_SPLIT(dev)) {
u32 val = I915_READ(PCH_PP_CONTROL);
if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)
I915_WRITE(PCH_PP_CONTROL, val & 0x3);
} else {
u32 val = I915_READ(PP_CONTROL);
if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)
I915_WRITE(PP_CONTROL, val & 0x3);
}
/* Always do a full power on as we do not know what state
* we were left in.
*/
@ -582,6 +552,8 @@ static void intel_lvds_destroy(struct drm_connector *connector)
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
intel_panel_destroy_backlight(dev);
if (dev_priv->lid_notifier.notifier_call)
acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
@ -1040,6 +1012,19 @@ bool intel_lvds_init(struct drm_device *dev)
pwm = I915_READ(BLC_PWM_PCH_CTL1);
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
/*
* Unlock registers and just
* leave them unlocked
*/
I915_WRITE(PCH_PP_CONTROL,
I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
} else {
/*
* Unlock registers and just
* leave them unlocked
*/
I915_WRITE(PP_CONTROL,
I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
}
dev_priv->lid_notifier.notifier_call = intel_lid_notify;
if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
@ -1049,6 +1034,9 @@ bool intel_lvds_init(struct drm_device *dev)
/* keep the LVDS connector */
dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
intel_panel_setup_backlight(dev);
return true;
failed:

View File

@ -227,7 +227,6 @@ void intel_opregion_asle_intr(struct drm_device *dev)
asle->aslc = asle_stat;
}
/* Only present on Ironlake+ */
void intel_opregion_gse_intr(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;

View File

@ -277,7 +277,7 @@ void intel_panel_enable_backlight(struct drm_device *dev)
dev_priv->backlight_enabled = true;
}
void intel_panel_setup_backlight(struct drm_device *dev)
static void intel_panel_init_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@ -309,3 +309,73 @@ intel_panel_detect(struct drm_device *dev)
return connector_status_unknown;
}
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
static int intel_panel_update_status(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
intel_panel_set_backlight(dev, bd->props.brightness);
return 0;
}
static int intel_panel_get_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
return intel_panel_get_backlight(dev);
}
static const struct backlight_ops intel_panel_bl_ops = {
.update_status = intel_panel_update_status,
.get_brightness = intel_panel_get_brightness,
};
int intel_panel_setup_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct backlight_properties props;
struct drm_connector *connector;
intel_panel_init_backlight(dev);
if (dev_priv->int_lvds_connector)
connector = dev_priv->int_lvds_connector;
else if (dev_priv->int_edp_connector)
connector = dev_priv->int_edp_connector;
else
return -ENODEV;
props.type = BACKLIGHT_RAW;
props.max_brightness = intel_panel_get_max_backlight(dev);
dev_priv->backlight =
backlight_device_register("intel_backlight",
&connector->kdev, dev,
&intel_panel_bl_ops, &props);
if (IS_ERR(dev_priv->backlight)) {
DRM_ERROR("Failed to register backlight: %ld\n",
PTR_ERR(dev_priv->backlight));
dev_priv->backlight = NULL;
return -ENODEV;
}
dev_priv->backlight->props.brightness = intel_panel_get_backlight(dev);
return 0;
}
void intel_panel_destroy_backlight(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (dev_priv->backlight)
backlight_device_unregister(dev_priv->backlight);
}
#else
int intel_panel_setup_backlight(struct drm_device *dev)
{
intel_panel_init_backlight(dev);
return 0;
}
void intel_panel_destroy_backlight(struct drm_device *dev)
{
return;
}
#endif