forked from luck/tmp_suning_uos_patched
can: sja1000: legacy SJA1000 ISA bus driver
This patch adds support for legacy SJA1000 CAN controllers on the ISA
or PC-104 bus. The I/O port or memory address and the IRQ number must
be specified via module parameters:
insmod sja1000_isa.ko port=0x310,0x380 irq=7,11
for ISA devices using I/O ports or:
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11
for memory mapped ISA devices.
Indirect access via address and data port is supported as well:
insmod sja1000_isa.ko port=0x310,0x380 indirect=1 irq=7,11
Here is a full list of the supported module parameters:
port:I/O port number (array of ulong)
mem:I/O memory address (array of ulong)
indirect:Indirect access via address and data port (array of byte)
irq:IRQ number (array of int)
clk:External oscillator clock frequency (default=16000000 [16 MHz])
(array of int)
cdr:Clock divider register (default=0x48 [CDR_CBP | CDR_CLK_OFF])
(array of byte)
ocr:Output clock register (default=0x18 [OCR_TX0_PUSHPULL])
(array of byte)
Note: for clk, cdr, ocr, the first argument re-defines the default
for all other devices, e.g.:
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 clk=24000000
is equivalent to
insmod sja1000_isa.ko mem=0xd1000,0xd1000 irq=7,11 \
clk=24000000,24000000
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Wolfgang Grandegger
David S. Miller
parent
8935f57e68
commit
2a6ba39ad6
@ -41,6 +41,13 @@ config CAN_SJA1000
|
||||
---help---
|
||||
Driver for the SJA1000 CAN controllers from Philips or NXP
|
||||
|
||||
config CAN_SJA1000_ISA
|
||||
depends on CAN_SJA1000 && ISA
|
||||
tristate "ISA Bus based legacy SJA1000 driver"
|
||||
---help---
|
||||
This driver adds legacy support for SJA1000 chips connected to
|
||||
the ISA bus using I/O port, memory mapped or indirect access.
|
||||
|
||||
config CAN_SJA1000_PLATFORM
|
||||
depends on CAN_SJA1000
|
||||
tristate "Generic Platform Bus based SJA1000 driver"
|
||||
|
||||
@ -3,6 +3,7 @@
|
||||
#
|
||||
|
||||
obj-$(CONFIG_CAN_SJA1000) += sja1000.o
|
||||
obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
|
||||
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
|
||||
obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
|
||||
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
|
||||
|
||||
281
drivers/net/can/sja1000/sja1000_isa.c
Normal file
281
drivers/net/can/sja1000/sja1000_isa.c
Normal file
@ -0,0 +1,281 @@
|
||||
/*
|
||||
* Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License
|
||||
* as published by the Free Software Foundation
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/isa.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/can.h>
|
||||
#include <linux/can/dev.h>
|
||||
#include <linux/can/platform/sja1000.h>
|
||||
|
||||
#include "sja1000.h"
|
||||
|
||||
#define DRV_NAME "sja1000_isa"
|
||||
|
||||
#define MAXDEV 8
|
||||
|
||||
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
|
||||
MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the ISA bus");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
||||
#define CLK_DEFAULT 16000000 /* 16 MHz */
|
||||
#define CDR_DEFAULT (CDR_CBP | CDR_CLK_OFF)
|
||||
#define OCR_DEFAULT OCR_TX0_PUSHPULL
|
||||
|
||||
static unsigned long port[MAXDEV];
|
||||
static unsigned long mem[MAXDEV];
|
||||
static int __devinitdata irq[MAXDEV];
|
||||
static int __devinitdata clk[MAXDEV];
|
||||
static char __devinitdata cdr[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
|
||||
static char __devinitdata ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
|
||||
static char __devinitdata indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
|
||||
|
||||
module_param_array(port, ulong, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(port, "I/O port number");
|
||||
|
||||
module_param_array(mem, ulong, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(mem, "I/O memory address");
|
||||
|
||||
module_param_array(indirect, byte, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
|
||||
|
||||
module_param_array(irq, int, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(irq, "IRQ number");
|
||||
|
||||
module_param_array(clk, int, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(clk, "External oscillator clock frequency "
|
||||
"(default=16000000 [16 MHz])");
|
||||
|
||||
module_param_array(cdr, byte, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(cdr, "Clock divider register "
|
||||
"(default=0x48 [CDR_CBP | CDR_CLK_OFF])");
|
||||
|
||||
module_param_array(ocr, byte, NULL, S_IRUGO);
|
||||
MODULE_PARM_DESC(ocr, "Output control register "
|
||||
"(default=0x18 [OCR_TX0_PUSHPULL])");
|
||||
|
||||
#define SJA1000_IOSIZE 0x20
|
||||
#define SJA1000_IOSIZE_INDIRECT 0x02
|
||||
|
||||
static u8 sja1000_isa_mem_read_reg(const struct sja1000_priv *priv, int reg)
|
||||
{
|
||||
return readb(priv->reg_base + reg);
|
||||
}
|
||||
|
||||
static void sja1000_isa_mem_write_reg(const struct sja1000_priv *priv,
|
||||
int reg, u8 val)
|
||||
{
|
||||
writeb(val, priv->reg_base + reg);
|
||||
}
|
||||
|
||||
static u8 sja1000_isa_port_read_reg(const struct sja1000_priv *priv, int reg)
|
||||
{
|
||||
return inb((unsigned long)priv->reg_base + reg);
|
||||
}
|
||||
|
||||
static void sja1000_isa_port_write_reg(const struct sja1000_priv *priv,
|
||||
int reg, u8 val)
|
||||
{
|
||||
outb(val, (unsigned long)priv->reg_base + reg);
|
||||
}
|
||||
|
||||
static u8 sja1000_isa_port_read_reg_indirect(const struct sja1000_priv *priv,
|
||||
int reg)
|
||||
{
|
||||
unsigned long base = (unsigned long)priv->reg_base;
|
||||
|
||||
outb(reg, base);
|
||||
return inb(base + 1);
|
||||
}
|
||||
|
||||
static void sja1000_isa_port_write_reg_indirect(const struct sja1000_priv *priv,
|
||||
int reg, u8 val)
|
||||
{
|
||||
unsigned long base = (unsigned long)priv->reg_base;
|
||||
|
||||
outb(reg, base);
|
||||
outb(val, base + 1);
|
||||
}
|
||||
|
||||
static int __devinit sja1000_isa_match(struct device *pdev, unsigned int idx)
|
||||
{
|
||||
if (port[idx] || mem[idx]) {
|
||||
if (irq[idx])
|
||||
return 1;
|
||||
} else if (idx)
|
||||
return 0;
|
||||
|
||||
dev_err(pdev, "insufficient parameters supplied\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devinit sja1000_isa_probe(struct device *pdev, unsigned int idx)
|
||||
{
|
||||
struct net_device *dev;
|
||||
struct sja1000_priv *priv;
|
||||
void __iomem *base = NULL;
|
||||
int iosize = SJA1000_IOSIZE;
|
||||
int err;
|
||||
|
||||
if (mem[idx]) {
|
||||
if (!request_mem_region(mem[idx], iosize, DRV_NAME)) {
|
||||
err = -EBUSY;
|
||||
goto exit;
|
||||
}
|
||||
base = ioremap_nocache(mem[idx], iosize);
|
||||
if (!base) {
|
||||
err = -ENOMEM;
|
||||
goto exit_release;
|
||||
}
|
||||
} else {
|
||||
if (indirect[idx] > 0 ||
|
||||
(indirect[idx] == -1 && indirect[0] > 0))
|
||||
iosize = SJA1000_IOSIZE_INDIRECT;
|
||||
if (!request_region(port[idx], iosize, DRV_NAME)) {
|
||||
err = -EBUSY;
|
||||
goto exit;
|
||||
}
|
||||
}
|
||||
|
||||
dev = alloc_sja1000dev(0);
|
||||
if (!dev) {
|
||||
err = -ENOMEM;
|
||||
goto exit_unmap;
|
||||
}
|
||||
priv = netdev_priv(dev);
|
||||
|
||||
dev->irq = irq[idx];
|
||||
priv->irq_flags = IRQF_SHARED;
|
||||
if (mem[idx]) {
|
||||
priv->reg_base = base;
|
||||
dev->base_addr = mem[idx];
|
||||
priv->read_reg = sja1000_isa_mem_read_reg;
|
||||
priv->write_reg = sja1000_isa_mem_write_reg;
|
||||
} else {
|
||||
priv->reg_base = (void __iomem *)port[idx];
|
||||
dev->base_addr = port[idx];
|
||||
|
||||
if (iosize == SJA1000_IOSIZE_INDIRECT) {
|
||||
priv->read_reg = sja1000_isa_port_read_reg_indirect;
|
||||
priv->write_reg = sja1000_isa_port_write_reg_indirect;
|
||||
} else {
|
||||
priv->read_reg = sja1000_isa_port_read_reg;
|
||||
priv->write_reg = sja1000_isa_port_write_reg;
|
||||
}
|
||||
}
|
||||
|
||||
if (clk[idx])
|
||||
priv->can.clock.freq = clk[idx] / 2;
|
||||
else if (clk[0])
|
||||
priv->can.clock.freq = clk[0] / 2;
|
||||
else
|
||||
priv->can.clock.freq = CLK_DEFAULT / 2;
|
||||
|
||||
if (ocr[idx] != -1)
|
||||
priv->ocr = ocr[idx] & 0xff;
|
||||
else if (ocr[0] != -1)
|
||||
priv->ocr = ocr[0] & 0xff;
|
||||
else
|
||||
priv->ocr = OCR_DEFAULT;
|
||||
|
||||
if (cdr[idx] != -1)
|
||||
priv->cdr = cdr[idx] & 0xff;
|
||||
else if (cdr[0] != -1)
|
||||
priv->cdr = cdr[0] & 0xff;
|
||||
else
|
||||
priv->cdr = CDR_DEFAULT;
|
||||
|
||||
dev_set_drvdata(pdev, dev);
|
||||
SET_NETDEV_DEV(dev, pdev);
|
||||
|
||||
err = register_sja1000dev(dev);
|
||||
if (err) {
|
||||
dev_err(pdev, "registering %s failed (err=%d)\n",
|
||||
DRV_NAME, err);
|
||||
goto exit_unmap;
|
||||
}
|
||||
|
||||
dev_info(pdev, "%s device registered (reg_base=0x%p, irq=%d)\n",
|
||||
DRV_NAME, priv->reg_base, dev->irq);
|
||||
return 0;
|
||||
|
||||
exit_unmap:
|
||||
if (mem[idx])
|
||||
iounmap(base);
|
||||
exit_release:
|
||||
if (mem[idx])
|
||||
release_mem_region(mem[idx], iosize);
|
||||
else
|
||||
release_region(port[idx], iosize);
|
||||
exit:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int __devexit sja1000_isa_remove(struct device *pdev, unsigned int idx)
|
||||
{
|
||||
struct net_device *dev = dev_get_drvdata(pdev);
|
||||
struct sja1000_priv *priv = netdev_priv(dev);
|
||||
|
||||
unregister_sja1000dev(dev);
|
||||
dev_set_drvdata(pdev, NULL);
|
||||
|
||||
if (mem[idx]) {
|
||||
iounmap(priv->reg_base);
|
||||
release_mem_region(mem[idx], SJA1000_IOSIZE);
|
||||
} else {
|
||||
if (priv->read_reg == sja1000_isa_port_read_reg_indirect)
|
||||
release_region(port[idx], SJA1000_IOSIZE_INDIRECT);
|
||||
else
|
||||
release_region(port[idx], SJA1000_IOSIZE);
|
||||
}
|
||||
free_sja1000dev(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct isa_driver sja1000_isa_driver = {
|
||||
.match = sja1000_isa_match,
|
||||
.probe = sja1000_isa_probe,
|
||||
.remove = __devexit_p(sja1000_isa_remove),
|
||||
.driver = {
|
||||
.name = DRV_NAME,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init sja1000_isa_init(void)
|
||||
{
|
||||
int err = isa_register_driver(&sja1000_isa_driver, MAXDEV);
|
||||
|
||||
if (!err)
|
||||
printk(KERN_INFO
|
||||
"Legacy %s driver for max. %d devices registered\n",
|
||||
DRV_NAME, MAXDEV);
|
||||
return err;
|
||||
}
|
||||
|
||||
static void __exit sja1000_isa_exit(void)
|
||||
{
|
||||
isa_unregister_driver(&sja1000_isa_driver);
|
||||
}
|
||||
|
||||
module_init(sja1000_isa_init);
|
||||
module_exit(sja1000_isa_exit);
|
||||
Loading…
Reference in New Issue
Block a user