forked from luck/tmp_suning_uos_patched
hwmon: Remove ads1015 driver
A driver for ADS1015 with more functionality is available in the iio subsystem. Remove the hwmon driver as duplicate. If the chip is used for hardware monitoring, the iio->hwmon bridge should be used. Cc: Dirk Eibach <eibach@gdsys.de> Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.net Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
e027a2dea5
commit
2c9d5b5e32
|
|
@ -1,90 +0,0 @@
|
|||
Kernel driver ads1015
|
||||
=====================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* Texas Instruments ADS1015
|
||||
|
||||
Prefix: 'ads1015'
|
||||
|
||||
Datasheet: Publicly available at the Texas Instruments website:
|
||||
|
||||
http://focus.ti.com/lit/ds/symlink/ads1015.pdf
|
||||
|
||||
* Texas Instruments ADS1115
|
||||
|
||||
Prefix: 'ads1115'
|
||||
|
||||
Datasheet: Publicly available at the Texas Instruments website:
|
||||
|
||||
http://focus.ti.com/lit/ds/symlink/ads1115.pdf
|
||||
|
||||
Authors:
|
||||
Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Texas Instruments ADS1015/ADS1115.
|
||||
|
||||
This device is a 12/16-bit A-D converter with 4 inputs.
|
||||
|
||||
The inputs can be used single ended or in certain differential combinations.
|
||||
|
||||
The inputs can be made available by 8 sysfs input files in0_input - in7_input:
|
||||
|
||||
- in0: Voltage over AIN0 and AIN1.
|
||||
- in1: Voltage over AIN0 and AIN3.
|
||||
- in2: Voltage over AIN1 and AIN3.
|
||||
- in3: Voltage over AIN2 and AIN3.
|
||||
- in4: Voltage over AIN0 and GND.
|
||||
- in5: Voltage over AIN1 and GND.
|
||||
- in6: Voltage over AIN2 and GND.
|
||||
- in7: Voltage over AIN3 and GND.
|
||||
|
||||
Which inputs are available can be configured using platform data or devicetree.
|
||||
|
||||
By default all inputs are exported.
|
||||
|
||||
Platform Data
|
||||
-------------
|
||||
|
||||
In linux/platform_data/ads1015.h platform data is defined, channel_data contains
|
||||
configuration data for the used input combinations:
|
||||
|
||||
- pga is the programmable gain amplifier (values are full scale)
|
||||
|
||||
- 0: +/- 6.144 V
|
||||
- 1: +/- 4.096 V
|
||||
- 2: +/- 2.048 V
|
||||
- 3: +/- 1.024 V
|
||||
- 4: +/- 0.512 V
|
||||
- 5: +/- 0.256 V
|
||||
|
||||
- data_rate in samples per second
|
||||
|
||||
- 0: 128
|
||||
- 1: 250
|
||||
- 2: 490
|
||||
- 3: 920
|
||||
- 4: 1600
|
||||
- 5: 2400
|
||||
- 6: 3300
|
||||
|
||||
Example::
|
||||
|
||||
struct ads1015_platform_data data = {
|
||||
.channel_data = {
|
||||
[2] = { .enabled = true, .pga = 1, .data_rate = 0 },
|
||||
[4] = { .enabled = true, .pga = 4, .data_rate = 5 },
|
||||
}
|
||||
};
|
||||
|
||||
In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
|
||||
(FS +/- 0.512 V, 2400 SPS) would be created.
|
||||
|
||||
Devicetree
|
||||
----------
|
||||
|
||||
Configuration is also possible via devicetree:
|
||||
Documentation/devicetree/bindings/hwmon/ads1015.txt
|
||||
|
|
@ -30,7 +30,6 @@ Hardware Monitoring Kernel Drivers
|
|||
adm1031
|
||||
adm1275
|
||||
adm9240
|
||||
ads1015
|
||||
ads7828
|
||||
adt7410
|
||||
adt7411
|
||||
|
|
|
|||
|
|
@ -517,14 +517,6 @@ W: http://ez.analog.com/community/linux-device-drivers
|
|||
S: Supported
|
||||
F: drivers/video/backlight/adp8860_bl.c
|
||||
|
||||
ADS1015 HARDWARE MONITOR DRIVER
|
||||
M: Dirk Eibach <eibach@gdsys.de>
|
||||
L: linux-hwmon@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/hwmon/ads1015.rst
|
||||
F: drivers/hwmon/ads1015.c
|
||||
F: include/linux/platform_data/ads1015.h
|
||||
|
||||
ADT746X FAN DRIVER
|
||||
M: Colin Leroy <colin@colino.net>
|
||||
S: Maintained
|
||||
|
|
|
|||
|
|
@ -1570,16 +1570,6 @@ config SENSORS_ADC128D818
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called adc128d818.
|
||||
|
||||
config SENSORS_ADS1015
|
||||
tristate "Texas Instruments ADS1015"
|
||||
depends on I2C
|
||||
help
|
||||
If you say yes here you get support for Texas Instruments
|
||||
ADS1015/ADS1115 12/16-bit 4-input ADC device.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called ads1015.
|
||||
|
||||
config SENSORS_ADS7828
|
||||
tristate "Texas Instruments ADS7828 and compatibles"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -35,7 +35,6 @@ obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
|
|||
obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
|
||||
obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
|
||||
obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
|
||||
obj-$(CONFIG_SENSORS_ADS1015) += ads1015.o
|
||||
obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
|
||||
obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o
|
||||
obj-$(CONFIG_SENSORS_ADT7X10) += adt7x10.o
|
||||
|
|
|
|||
|
|
@ -1,324 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* ads1015.c - lm_sensors driver for ads1015 12-bit 4-input ADC
|
||||
* (C) Copyright 2010
|
||||
* Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
|
||||
*
|
||||
* Based on the ads7828 driver by Steve Hardy.
|
||||
*
|
||||
* Datasheet available at: http://focus.ti.com/lit/ds/symlink/ads1015.pdf
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/of.h>
|
||||
|
||||
#include <linux/platform_data/ads1015.h>
|
||||
|
||||
/* ADS1015 registers */
|
||||
enum {
|
||||
ADS1015_CONVERSION = 0,
|
||||
ADS1015_CONFIG = 1,
|
||||
};
|
||||
|
||||
/* PGA fullscale voltages in mV */
|
||||
static const unsigned int fullscale_table[8] = {
|
||||
6144, 4096, 2048, 1024, 512, 256, 256, 256 };
|
||||
|
||||
/* Data rates in samples per second */
|
||||
static const unsigned int data_rate_table_1015[8] = {
|
||||
128, 250, 490, 920, 1600, 2400, 3300, 3300
|
||||
};
|
||||
|
||||
static const unsigned int data_rate_table_1115[8] = {
|
||||
8, 16, 32, 64, 128, 250, 475, 860
|
||||
};
|
||||
|
||||
#define ADS1015_DEFAULT_CHANNELS 0xff
|
||||
#define ADS1015_DEFAULT_PGA 2
|
||||
#define ADS1015_DEFAULT_DATA_RATE 4
|
||||
|
||||
enum ads1015_chips {
|
||||
ads1015,
|
||||
ads1115,
|
||||
};
|
||||
|
||||
struct ads1015_data {
|
||||
struct device *hwmon_dev;
|
||||
struct mutex update_lock; /* mutex protect updates */
|
||||
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
|
||||
enum ads1015_chips id;
|
||||
};
|
||||
|
||||
static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
|
||||
{
|
||||
u16 config;
|
||||
struct ads1015_data *data = i2c_get_clientdata(client);
|
||||
unsigned int pga = data->channel_data[channel].pga;
|
||||
unsigned int data_rate = data->channel_data[channel].data_rate;
|
||||
unsigned int conversion_time_ms;
|
||||
const unsigned int * const rate_table = data->id == ads1115 ?
|
||||
data_rate_table_1115 : data_rate_table_1015;
|
||||
int res;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
/* get channel parameters */
|
||||
res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
|
||||
if (res < 0)
|
||||
goto err_unlock;
|
||||
config = res;
|
||||
conversion_time_ms = DIV_ROUND_UP(1000, rate_table[data_rate]);
|
||||
|
||||
/* setup and start single conversion */
|
||||
config &= 0x001f;
|
||||
config |= (1 << 15) | (1 << 8);
|
||||
config |= (channel & 0x0007) << 12;
|
||||
config |= (pga & 0x0007) << 9;
|
||||
config |= (data_rate & 0x0007) << 5;
|
||||
|
||||
res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
|
||||
if (res < 0)
|
||||
goto err_unlock;
|
||||
|
||||
/* wait until conversion finished */
|
||||
msleep(conversion_time_ms);
|
||||
res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
|
||||
if (res < 0)
|
||||
goto err_unlock;
|
||||
config = res;
|
||||
if (!(config & (1 << 15))) {
|
||||
/* conversion not finished in time */
|
||||
res = -EIO;
|
||||
goto err_unlock;
|
||||
}
|
||||
|
||||
res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
|
||||
|
||||
err_unlock:
|
||||
mutex_unlock(&data->update_lock);
|
||||
return res;
|
||||
}
|
||||
|
||||
static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
|
||||
s16 reg)
|
||||
{
|
||||
struct ads1015_data *data = i2c_get_clientdata(client);
|
||||
unsigned int pga = data->channel_data[channel].pga;
|
||||
int fullscale = fullscale_table[pga];
|
||||
const int mask = data->id == ads1115 ? 0x7fff : 0x7ff0;
|
||||
|
||||
return DIV_ROUND_CLOSEST(reg * fullscale, mask);
|
||||
}
|
||||
|
||||
/* sysfs callback function */
|
||||
static ssize_t in_show(struct device *dev, struct device_attribute *da,
|
||||
char *buf)
|
||||
{
|
||||
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
int res;
|
||||
int index = attr->index;
|
||||
|
||||
res = ads1015_read_adc(client, index);
|
||||
if (res < 0)
|
||||
return res;
|
||||
|
||||
return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
|
||||
}
|
||||
|
||||
static const struct sensor_device_attribute ads1015_in[] = {
|
||||
SENSOR_ATTR_RO(in0_input, in, 0),
|
||||
SENSOR_ATTR_RO(in1_input, in, 1),
|
||||
SENSOR_ATTR_RO(in2_input, in, 2),
|
||||
SENSOR_ATTR_RO(in3_input, in, 3),
|
||||
SENSOR_ATTR_RO(in4_input, in, 4),
|
||||
SENSOR_ATTR_RO(in5_input, in, 5),
|
||||
SENSOR_ATTR_RO(in6_input, in, 6),
|
||||
SENSOR_ATTR_RO(in7_input, in, 7),
|
||||
};
|
||||
|
||||
/*
|
||||
* Driver interface
|
||||
*/
|
||||
|
||||
static int ads1015_remove(struct i2c_client *client)
|
||||
{
|
||||
struct ads1015_data *data = i2c_get_clientdata(client);
|
||||
int k;
|
||||
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
for (k = 0; k < ADS1015_CHANNELS; ++k)
|
||||
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int ads1015_get_channels_config_of(struct i2c_client *client)
|
||||
{
|
||||
struct ads1015_data *data = i2c_get_clientdata(client);
|
||||
struct device_node *node;
|
||||
|
||||
if (!client->dev.of_node
|
||||
|| !of_get_next_child(client->dev.of_node, NULL))
|
||||
return -EINVAL;
|
||||
|
||||
for_each_child_of_node(client->dev.of_node, node) {
|
||||
u32 pval;
|
||||
unsigned int channel;
|
||||
unsigned int pga = ADS1015_DEFAULT_PGA;
|
||||
unsigned int data_rate = ADS1015_DEFAULT_DATA_RATE;
|
||||
|
||||
if (of_property_read_u32(node, "reg", &pval)) {
|
||||
dev_err(&client->dev, "invalid reg on %pOF\n", node);
|
||||
continue;
|
||||
}
|
||||
|
||||
channel = pval;
|
||||
if (channel >= ADS1015_CHANNELS) {
|
||||
dev_err(&client->dev,
|
||||
"invalid channel index %d on %pOF\n",
|
||||
channel, node);
|
||||
continue;
|
||||
}
|
||||
|
||||
if (!of_property_read_u32(node, "ti,gain", &pval)) {
|
||||
pga = pval;
|
||||
if (pga > 6) {
|
||||
dev_err(&client->dev, "invalid gain on %pOF\n",
|
||||
node);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
if (!of_property_read_u32(node, "ti,datarate", &pval)) {
|
||||
data_rate = pval;
|
||||
if (data_rate > 7) {
|
||||
dev_err(&client->dev,
|
||||
"invalid data_rate on %pOF\n", node);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
data->channel_data[channel].enabled = true;
|
||||
data->channel_data[channel].pga = pga;
|
||||
data->channel_data[channel].data_rate = data_rate;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static void ads1015_get_channels_config(struct i2c_client *client)
|
||||
{
|
||||
unsigned int k;
|
||||
struct ads1015_data *data = i2c_get_clientdata(client);
|
||||
struct ads1015_platform_data *pdata = dev_get_platdata(&client->dev);
|
||||
|
||||
/* prefer platform data */
|
||||
if (pdata) {
|
||||
memcpy(data->channel_data, pdata->channel_data,
|
||||
sizeof(data->channel_data));
|
||||
return;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
if (!ads1015_get_channels_config_of(client))
|
||||
return;
|
||||
#endif
|
||||
|
||||
/* fallback on default configuration */
|
||||
for (k = 0; k < ADS1015_CHANNELS; ++k) {
|
||||
data->channel_data[k].enabled = true;
|
||||
data->channel_data[k].pga = ADS1015_DEFAULT_PGA;
|
||||
data->channel_data[k].data_rate = ADS1015_DEFAULT_DATA_RATE;
|
||||
}
|
||||
}
|
||||
|
||||
static int ads1015_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct ads1015_data *data;
|
||||
int err;
|
||||
unsigned int k;
|
||||
|
||||
data = devm_kzalloc(&client->dev, sizeof(struct ads1015_data),
|
||||
GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
if (client->dev.of_node)
|
||||
data->id = (enum ads1015_chips)
|
||||
of_device_get_match_data(&client->dev);
|
||||
else
|
||||
data->id = id->driver_data;
|
||||
i2c_set_clientdata(client, data);
|
||||
mutex_init(&data->update_lock);
|
||||
|
||||
/* build sysfs attribute group */
|
||||
ads1015_get_channels_config(client);
|
||||
for (k = 0; k < ADS1015_CHANNELS; ++k) {
|
||||
if (!data->channel_data[k].enabled)
|
||||
continue;
|
||||
err = device_create_file(&client->dev, &ads1015_in[k].dev_attr);
|
||||
if (err)
|
||||
goto exit_remove;
|
||||
}
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
err = PTR_ERR(data->hwmon_dev);
|
||||
goto exit_remove;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
exit_remove:
|
||||
for (k = 0; k < ADS1015_CHANNELS; ++k)
|
||||
device_remove_file(&client->dev, &ads1015_in[k].dev_attr);
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id ads1015_id[] = {
|
||||
{ "ads1015", ads1015},
|
||||
{ "ads1115", ads1115},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, ads1015_id);
|
||||
|
||||
static const struct of_device_id __maybe_unused ads1015_of_match[] = {
|
||||
{
|
||||
.compatible = "ti,ads1015",
|
||||
.data = (void *)ads1015
|
||||
},
|
||||
{
|
||||
.compatible = "ti,ads1115",
|
||||
.data = (void *)ads1115
|
||||
},
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ads1015_of_match);
|
||||
|
||||
static struct i2c_driver ads1015_driver = {
|
||||
.driver = {
|
||||
.name = "ads1015",
|
||||
.of_match_table = of_match_ptr(ads1015_of_match),
|
||||
},
|
||||
.probe = ads1015_probe,
|
||||
.remove = ads1015_remove,
|
||||
.id_table = ads1015_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(ads1015_driver);
|
||||
|
||||
MODULE_AUTHOR("Dirk Eibach <eibach@gdsys.de>");
|
||||
MODULE_DESCRIPTION("ADS1015 driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -958,7 +958,7 @@ config TI_ADC161S626
|
|||
|
||||
config TI_ADS1015
|
||||
tristate "Texas Instruments ADS1015 ADC"
|
||||
depends on I2C && !SENSORS_ADS1015
|
||||
depends on I2C
|
||||
select REGMAP_I2C
|
||||
select IIO_BUFFER
|
||||
select IIO_TRIGGERED_BUFFER
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user