forked from luck/tmp_suning_uos_patched
MIPS: Alchemy: get rid of common/reset.c
Implement reset / poweroff in the board code instead. The peripheral reset code is gone too since YAMON which all in-tree boards use does the same work when it boots. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/783/ Patchwork: http://patchwork.linux-mips.org/patch/882/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Manuel Lauss
Ralf Baechle
parent
325f8a0a31
commit
32fd6901a6
|
|
@ -5,8 +5,7 @@
|
|||
# Makefile for the Alchemy Au1xx0 CPUs, generic files.
|
||||
#
|
||||
|
||||
obj-y += prom.o time.o reset.o \
|
||||
clocks.o platform.o power.o setup.o \
|
||||
obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
|
||||
sleeper.o dma.o dbdma.o
|
||||
|
||||
obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
|
||||
|
|
|
|||
|
|
@ -1,185 +0,0 @@
|
|||
/*
|
||||
*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* Au1xx0 reset routines.
|
||||
*
|
||||
* Copyright 2001, 2006, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <asm/cacheflush.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
void au1000_restart(char *command)
|
||||
{
|
||||
/* Set all integrated peripherals to disabled states */
|
||||
extern void board_reset(void);
|
||||
u32 prid = read_c0_prid();
|
||||
|
||||
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
|
||||
|
||||
switch (prid & 0xFF000000) {
|
||||
case 0x00000000: /* Au1000 */
|
||||
au_writel(0x02, 0xb0000010); /* ac97_enable */
|
||||
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
|
||||
asm("sync");
|
||||
au_writel(0x00, 0xb017fffc); /* usbh_enable */
|
||||
au_writel(0x00, 0xb0200058); /* usbd_enable */
|
||||
au_writel(0x00, 0xb0300040); /* ir_enable */
|
||||
au_writel(0x00, 0xb4004104); /* mac dma */
|
||||
au_writel(0x00, 0xb4004114); /* mac dma */
|
||||
au_writel(0x00, 0xb4004124); /* mac dma */
|
||||
au_writel(0x00, 0xb4004134); /* mac dma */
|
||||
au_writel(0x00, 0xb0520000); /* macen0 */
|
||||
au_writel(0x00, 0xb0520004); /* macen1 */
|
||||
au_writel(0x00, 0xb1000008); /* i2s_enable */
|
||||
au_writel(0x00, 0xb1100100); /* uart0_enable */
|
||||
au_writel(0x00, 0xb1200100); /* uart1_enable */
|
||||
au_writel(0x00, 0xb1300100); /* uart2_enable */
|
||||
au_writel(0x00, 0xb1400100); /* uart3_enable */
|
||||
au_writel(0x02, 0xb1600100); /* ssi0_enable */
|
||||
au_writel(0x02, 0xb1680100); /* ssi1_enable */
|
||||
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
|
||||
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
|
||||
au_writel(0x00, 0xb1900028); /* sys_clksrc */
|
||||
au_writel(0x10, 0xb1900060); /* sys_cpupll */
|
||||
au_writel(0x00, 0xb1900064); /* sys_auxpll */
|
||||
au_writel(0x00, 0xb1900100); /* sys_pininputen */
|
||||
break;
|
||||
case 0x01000000: /* Au1500 */
|
||||
au_writel(0x02, 0xb0000010); /* ac97_enable */
|
||||
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
|
||||
asm("sync");
|
||||
au_writel(0x00, 0xb017fffc); /* usbh_enable */
|
||||
au_writel(0x00, 0xb0200058); /* usbd_enable */
|
||||
au_writel(0x00, 0xb4004104); /* mac dma */
|
||||
au_writel(0x00, 0xb4004114); /* mac dma */
|
||||
au_writel(0x00, 0xb4004124); /* mac dma */
|
||||
au_writel(0x00, 0xb4004134); /* mac dma */
|
||||
au_writel(0x00, 0xb1520000); /* macen0 */
|
||||
au_writel(0x00, 0xb1520004); /* macen1 */
|
||||
au_writel(0x00, 0xb1100100); /* uart0_enable */
|
||||
au_writel(0x00, 0xb1400100); /* uart3_enable */
|
||||
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
|
||||
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
|
||||
au_writel(0x00, 0xb1900028); /* sys_clksrc */
|
||||
au_writel(0x10, 0xb1900060); /* sys_cpupll */
|
||||
au_writel(0x00, 0xb1900064); /* sys_auxpll */
|
||||
au_writel(0x00, 0xb1900100); /* sys_pininputen */
|
||||
break;
|
||||
case 0x02000000: /* Au1100 */
|
||||
au_writel(0x02, 0xb0000010); /* ac97_enable */
|
||||
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
|
||||
asm("sync");
|
||||
au_writel(0x00, 0xb017fffc); /* usbh_enable */
|
||||
au_writel(0x00, 0xb0200058); /* usbd_enable */
|
||||
au_writel(0x00, 0xb0300040); /* ir_enable */
|
||||
au_writel(0x00, 0xb4004104); /* mac dma */
|
||||
au_writel(0x00, 0xb4004114); /* mac dma */
|
||||
au_writel(0x00, 0xb4004124); /* mac dma */
|
||||
au_writel(0x00, 0xb4004134); /* mac dma */
|
||||
au_writel(0x00, 0xb0520000); /* macen0 */
|
||||
au_writel(0x00, 0xb1000008); /* i2s_enable */
|
||||
au_writel(0x00, 0xb1100100); /* uart0_enable */
|
||||
au_writel(0x00, 0xb1200100); /* uart1_enable */
|
||||
au_writel(0x00, 0xb1400100); /* uart3_enable */
|
||||
au_writel(0x02, 0xb1600100); /* ssi0_enable */
|
||||
au_writel(0x02, 0xb1680100); /* ssi1_enable */
|
||||
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
|
||||
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
|
||||
au_writel(0x00, 0xb1900028); /* sys_clksrc */
|
||||
au_writel(0x10, 0xb1900060); /* sys_cpupll */
|
||||
au_writel(0x00, 0xb1900064); /* sys_auxpll */
|
||||
au_writel(0x00, 0xb1900100); /* sys_pininputen */
|
||||
break;
|
||||
case 0x03000000: /* Au1550 */
|
||||
au_writel(0x00, 0xb1a00004); /* psc 0 */
|
||||
au_writel(0x00, 0xb1b00004); /* psc 1 */
|
||||
au_writel(0x00, 0xb0a00004); /* psc 2 */
|
||||
au_writel(0x00, 0xb0b00004); /* psc 3 */
|
||||
au_writel(0x00, 0xb017fffc); /* usbh_enable */
|
||||
au_writel(0x00, 0xb0200058); /* usbd_enable */
|
||||
au_writel(0x00, 0xb4004104); /* mac dma */
|
||||
au_writel(0x00, 0xb4004114); /* mac dma */
|
||||
au_writel(0x00, 0xb4004124); /* mac dma */
|
||||
au_writel(0x00, 0xb4004134); /* mac dma */
|
||||
au_writel(0x00, 0xb1520000); /* macen0 */
|
||||
au_writel(0x00, 0xb1520004); /* macen1 */
|
||||
au_writel(0x00, 0xb1100100); /* uart0_enable */
|
||||
au_writel(0x00, 0xb1200100); /* uart1_enable */
|
||||
au_writel(0x00, 0xb1400100); /* uart3_enable */
|
||||
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
|
||||
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
|
||||
au_writel(0x00, 0xb1900028); /* sys_clksrc */
|
||||
au_writel(0x10, 0xb1900060); /* sys_cpupll */
|
||||
au_writel(0x00, 0xb1900064); /* sys_auxpll */
|
||||
au_writel(0x00, 0xb1900100); /* sys_pininputen */
|
||||
break;
|
||||
}
|
||||
|
||||
set_c0_status(ST0_BEV | ST0_ERL);
|
||||
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
|
||||
flush_cache_all();
|
||||
write_c0_wired(0);
|
||||
|
||||
/* Give board a chance to do a hardware reset */
|
||||
board_reset();
|
||||
|
||||
/* Jump to the beggining in case board_reset() is empty */
|
||||
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
|
||||
}
|
||||
|
||||
void au1000_halt(void)
|
||||
{
|
||||
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
|
||||
/* Power off system */
|
||||
printk(KERN_NOTICE "\n** Powering off...\n");
|
||||
au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
|
||||
au_sync();
|
||||
while (1); /* should not get here */
|
||||
#else
|
||||
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
|
||||
#ifdef CONFIG_MIPS_MIRAGE
|
||||
gpio_direction_output(210, 1);
|
||||
#endif
|
||||
#ifdef CONFIG_PM
|
||||
au_sleep();
|
||||
|
||||
/* Should not get here */
|
||||
printk(KERN_ERR "Unable to put CPU in sleep mode\n");
|
||||
while (1);
|
||||
#else
|
||||
while (1)
|
||||
__asm__(".set\tmips3\n\t"
|
||||
"wait\n\t"
|
||||
".set\tmips0");
|
||||
#endif
|
||||
#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
|
||||
}
|
||||
|
||||
void au1000_power_off(void)
|
||||
{
|
||||
au1000_halt();
|
||||
}
|
||||
|
|
@ -29,18 +29,13 @@
|
|||
#include <linux/ioport.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/mipsregs.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <au1000.h>
|
||||
|
||||
extern void __init board_setup(void);
|
||||
extern void au1000_restart(char *);
|
||||
extern void au1000_halt(void);
|
||||
extern void au1000_power_off(void);
|
||||
extern void set_cpuspec(void);
|
||||
|
||||
void __init plat_mem_setup(void)
|
||||
|
|
@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
|
|||
/* this is faster than wasting cycles trying to approximate it */
|
||||
preset_lpj = (est_freq >> 1) / HZ;
|
||||
|
||||
_machine_restart = au1000_restart;
|
||||
_machine_halt = au1000_halt;
|
||||
pm_power_off = au1000_power_off;
|
||||
|
||||
board_setup(); /* board specific setup */
|
||||
|
||||
if (au1xxx_cpu_needs_config_od())
|
||||
|
|
|
|||
|
|
@ -9,30 +9,15 @@
|
|||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/pm.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
#include <asm/mach-db1x00/bcsr.h>
|
||||
#include <asm/mach-db1x00/db1200.h>
|
||||
#include <asm/processor.h>
|
||||
#include <asm/reboot.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Alchemy Db1200";
|
||||
}
|
||||
|
||||
static void board_power_off(void)
|
||||
{
|
||||
bcsr_write(BCSR_RESETS, 0);
|
||||
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
|
||||
}
|
||||
|
||||
void board_reset(void)
|
||||
{
|
||||
bcsr_write(BCSR_RESETS, 0);
|
||||
bcsr_write(BCSR_SYSTEM, 0);
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
unsigned long freq0, clksrc, div, pfc;
|
||||
|
|
@ -73,10 +58,6 @@ void __init board_setup(void)
|
|||
clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
|
||||
__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
|
||||
wmb();
|
||||
|
||||
pm_power_off = board_power_off;
|
||||
_machine_halt = board_power_off;
|
||||
_machine_restart = (void(*)(char *))board_reset;
|
||||
}
|
||||
|
||||
/* use the hexleds to count the number of times the cpu has entered
|
||||
|
|
|
|||
|
|
@ -30,11 +30,13 @@
|
|||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
#include <asm/mach-au1x00/au1xxx_eth.h>
|
||||
#include <asm/mach-db1x00/db1x00.h>
|
||||
#include <asm/mach-db1x00/bcsr.h>
|
||||
#include <asm/reboot.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
|
|
@ -43,6 +45,18 @@ char irq_tab_alchemy[][5] __initdata = {
|
|||
[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */
|
||||
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
|
||||
};
|
||||
|
||||
static void bosporus_power_off(void)
|
||||
{
|
||||
printk(KERN_INFO "It's now safe to turn off power\n");
|
||||
while (1)
|
||||
asm volatile (".set mips3 ; wait ; .set mips0");
|
||||
}
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Alchemy Bosporus Gateway Reference";
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
|
|
@ -73,6 +87,16 @@ char irq_tab_alchemy[][5] __initdata = {
|
|||
[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
|
||||
[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
|
||||
};
|
||||
|
||||
static void mirage_power_off(void)
|
||||
{
|
||||
alchemy_gpio_direction_output(210, 1);
|
||||
}
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Alchemy Mirage";
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MIPS_DB1550
|
||||
|
|
@ -83,19 +107,19 @@ char irq_tab_alchemy[][5] __initdata = {
|
|||
};
|
||||
#endif
|
||||
|
||||
const char *get_system_type(void)
|
||||
#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
|
||||
static void mips_softreset(void)
|
||||
{
|
||||
#ifdef CONFIG_MIPS_BOSPORUS
|
||||
return "Alchemy Bosporus Gateway Reference";
|
||||
#else
|
||||
return "Alchemy Db1x00";
|
||||
#endif
|
||||
asm volatile ("jr\t%0" : : "r"(0xbfc00000));
|
||||
}
|
||||
|
||||
void board_reset(void)
|
||||
#else
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
bcsr_write(BCSR_SYSTEM, 0);
|
||||
return "Alchemy Db1x00";
|
||||
}
|
||||
#endif
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
|
|
@ -196,8 +220,17 @@ void __init board_setup(void)
|
|||
* be part of the audio driver.
|
||||
*/
|
||||
alchemy_gpio_direction_output(209, 1);
|
||||
|
||||
pm_power_off = mirage_power_off;
|
||||
_machine_halt = mirage_power_off;
|
||||
_machine_restart = (void(*)(char *))mips_softreset;
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MIPS_BOSPORUS
|
||||
pm_power_off = bosporus_power_off;
|
||||
_machine_halt = bosporus_power_off;
|
||||
_machine_restart = (void(*)(char *))mips_softreset;
|
||||
#endif
|
||||
au_sync();
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -8,6 +8,35 @@
|
|||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-db1x00/bcsr.h>
|
||||
|
||||
static void db1x_power_off(void)
|
||||
{
|
||||
bcsr_write(BCSR_RESETS, 0);
|
||||
bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
|
||||
}
|
||||
|
||||
static void db1x_reset(char *c)
|
||||
{
|
||||
bcsr_write(BCSR_RESETS, 0);
|
||||
bcsr_write(BCSR_SYSTEM, 0);
|
||||
}
|
||||
|
||||
static int __init db1x_poweroff_setup(void)
|
||||
{
|
||||
if (!pm_power_off)
|
||||
pm_power_off = db1x_power_off;
|
||||
if (!_machine_halt)
|
||||
_machine_halt = db1x_power_off;
|
||||
if (!_machine_restart)
|
||||
_machine_restart = db1x_reset;
|
||||
|
||||
return 0;
|
||||
}
|
||||
late_initcall(db1x_poweroff_setup);
|
||||
|
||||
/* register a pcmcia socket */
|
||||
int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
|
||||
|
|
|
|||
|
|
@ -31,7 +31,9 @@
|
|||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
|
@ -50,12 +52,19 @@ char irq_tab_alchemy[][5] __initdata = {
|
|||
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
|
||||
int mtx1_pci_idsel(unsigned int devsel, int assert);
|
||||
|
||||
void board_reset(void)
|
||||
static void mtx1_reset(char *c)
|
||||
{
|
||||
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
|
||||
au_writel(0x00000000, 0xAE00001C);
|
||||
}
|
||||
|
||||
static void mtx1_power_off(void)
|
||||
{
|
||||
printk(KERN_ALERT "It's now safe to remove power\n");
|
||||
while (1)
|
||||
asm volatile (".set mips3 ; wait ; .set mips1");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
#ifdef CONFIG_SERIAL_8250_CONSOLE
|
||||
|
|
@ -98,6 +107,10 @@ void __init board_setup(void)
|
|||
alchemy_gpio_direction_output(211, 1); /* green on */
|
||||
alchemy_gpio_direction_output(212, 0); /* red off */
|
||||
|
||||
pm_power_off = mtx1_power_off;
|
||||
_machine_halt = mtx1_power_off;
|
||||
_machine_restart = mtx1_reset;
|
||||
|
||||
printk(KERN_INFO "4G Systems MTX-1 Board\n");
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -27,17 +27,26 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
void board_reset(void)
|
||||
static void xxs1500_reset(char *c)
|
||||
{
|
||||
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
|
||||
au_writel(0x00000000, 0xAE00001C);
|
||||
}
|
||||
|
||||
static void xxs1500_power_off(void)
|
||||
{
|
||||
printk(KERN_ALERT "It's now safe to remove power\n");
|
||||
while (1)
|
||||
asm volatile (".set mips3 ; wait ; .set mips1");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
u32 pin_func;
|
||||
|
|
@ -52,6 +61,10 @@ void __init board_setup(void)
|
|||
}
|
||||
#endif
|
||||
|
||||
pm_power_off = xxs1500_power_off;
|
||||
_machine_halt = xxs1500_power_off;
|
||||
_machine_restart = xxs1500_reset;
|
||||
|
||||
alchemy_gpio1_input_enable();
|
||||
alchemy_gpio2_enable();
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user