AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

ARM: at91: aic can use fast eoi handler type

Browse Source 
The Advanced Interrupt Controller allows us to use the fast EOI handler type.
It lets us remove the Atmel specific workaround into arch/arm/kernel/irq.c
used to indicate to the AIC the end of the interrupt treatment.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This commit is contained in:
Ludovic Desroches 2012-05-25 14:11:51 +02:00 committed by Nicolas Ferre
parent f25b00be60
commit 42a859daaf
4 changed files with 17 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/arm/kernel/irq.c
View File

@ -40,13 +40,6 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
/*
* No architecture-specific irq_finish function defined in arm/arch/irqs.h.
*/
#ifndef irq_finish
#define irq_finish(irq) do { } while (0)
#endif
unsigned long irq_err_count;
int arch_show_interrupts(struct seq_file *p, int prec)
@ -85,9 +78,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs)
generic_handle_irq(irq);
}
/* AT91 specific workaround */
irq_finish(irq);
irq_exit();
set_irq_regs(old_regs);
}

9
arch/arm/mach-at91/gpio.c
View File

@ -26,6 +26,8 @@
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/at91_pio.h>
@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = {
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
struct irq_data *idata = irq_desc_get_irq_data(desc);
struct irq_chip *chip = irq_data_get_irq_chip(idata);
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
void __iomem *pio = at91_gpio->regbase;
unsigned long isr;
int n;
/* temporarily mask (level sensitive) parent IRQ */
chip->irq_ack(idata);
chained_irq_enter(chip, desc);
for (;;) {
/* Reading ISR acks pending (edge triggered) GPIO interrupts.
* When there none are pending, we're finished unless we need
@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
}
}
chip->irq_unmask(idata);
chained_irq_exit(chip, desc);
/* now it may re-trigger */
}

7
arch/arm/mach-at91/include/mach/irqs.h
View File

@ -27,13 +27,6 @@
#define NR_AIC_IRQS 32
/*
* Acknowledge interrupt with AIC after interrupt has been handled.
* (by kernel/irq.c)
*/
#define irq_finish(irq) do { at91_aic_write(AT91_AIC_EOICR, 0); } while (0)
/*
* IRQ interrupt symbols are the AT91xxx_ID_* symbols
* for IRQs handled directly through the AIC, or else the AT91_PIN_*

15
arch/arm/mach-at91/irq.c
View File

@ -55,6 +55,15 @@ static void at91_aic_unmask_irq(struct irq_data *d)
at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
}
static void at91_aic_eoi(struct irq_data *d)
{
/*
* Mark end-of-interrupt on AIC, the controller doesn't care about
* the value written. Moreover it's a write-only register.
*/
at91_aic_write(AT91_AIC_EOICR, 0);
}
unsigned int at91_extern_irq;
#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
@ -128,11 +137,11 @@ void at91_irq_resume(void)
static struct irq_chip at91_aic_chip = {
.name = "AIC",
.irq_ack = at91_aic_mask_irq,
.irq_mask = at91_aic_mask_irq,
.irq_unmask = at91_aic_unmask_irq,
.irq_set_type = at91_aic_set_type,
.irq_set_wake = at91_aic_set_wake,
.irq_eoi = at91_aic_eoi,
};
static void __init at91_aic_hw_init(unsigned int spu_vector)
@ -171,7 +180,7 @@ static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
/* Active Low interrupt, without priority */
at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq);
irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
return 0;
@ -238,7 +247,7 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
/* Active Low interrupt, with the specified priority */
at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
irq_set_chip_and_handler(i, &at91_aic_chip, handle_fasteoi_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}