forked from luck/tmp_suning_uos_patched
mv643xx_eth: add support for chips without transmit bandwidth control
Add support for mv643xx_eth versions that have no transmit bandwidth control registers at all, such as the ethernet block found in the Marvell 88F6183 ARM SoC. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
This commit is contained in:
parent
6b8f90c276
commit
457b1d5a4b
@ -271,9 +271,13 @@ struct mv643xx_eth_shared_private {
|
||||
*/
|
||||
unsigned int t_clk;
|
||||
int extended_rx_coal_limit;
|
||||
int tx_bw_control_moved;
|
||||
int tx_bw_control;
|
||||
};
|
||||
|
||||
#define TX_BW_CONTROL_ABSENT 0
|
||||
#define TX_BW_CONTROL_OLD_LAYOUT 1
|
||||
#define TX_BW_CONTROL_NEW_LAYOUT 2
|
||||
|
||||
|
||||
/* per-port *****************************************************************/
|
||||
struct mib_counters {
|
||||
@ -938,14 +942,17 @@ static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst)
|
||||
if (bucket_size > 65535)
|
||||
bucket_size = 65535;
|
||||
|
||||
if (mp->shared->tx_bw_control_moved) {
|
||||
wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate);
|
||||
wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu);
|
||||
wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size);
|
||||
} else {
|
||||
switch (mp->shared->tx_bw_control) {
|
||||
case TX_BW_CONTROL_OLD_LAYOUT:
|
||||
wrl(mp, TX_BW_RATE(mp->port_num), token_rate);
|
||||
wrl(mp, TX_BW_MTU(mp->port_num), mtu);
|
||||
wrl(mp, TX_BW_BURST(mp->port_num), bucket_size);
|
||||
break;
|
||||
case TX_BW_CONTROL_NEW_LAYOUT:
|
||||
wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate);
|
||||
wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu);
|
||||
wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -977,14 +984,21 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq)
|
||||
/*
|
||||
* Turn on fixed priority mode.
|
||||
*/
|
||||
if (mp->shared->tx_bw_control_moved)
|
||||
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
|
||||
else
|
||||
off = 0;
|
||||
switch (mp->shared->tx_bw_control) {
|
||||
case TX_BW_CONTROL_OLD_LAYOUT:
|
||||
off = TXQ_FIX_PRIO_CONF(mp->port_num);
|
||||
break;
|
||||
case TX_BW_CONTROL_NEW_LAYOUT:
|
||||
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
|
||||
break;
|
||||
}
|
||||
|
||||
val = rdl(mp, off);
|
||||
val |= 1 << txq->index;
|
||||
wrl(mp, off, val);
|
||||
if (off) {
|
||||
val = rdl(mp, off);
|
||||
val |= 1 << txq->index;
|
||||
wrl(mp, off, val);
|
||||
}
|
||||
}
|
||||
|
||||
static void txq_set_wrr(struct tx_queue *txq, int weight)
|
||||
@ -996,23 +1010,30 @@ static void txq_set_wrr(struct tx_queue *txq, int weight)
|
||||
/*
|
||||
* Turn off fixed priority mode.
|
||||
*/
|
||||
if (mp->shared->tx_bw_control_moved)
|
||||
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
|
||||
else
|
||||
off = 0;
|
||||
switch (mp->shared->tx_bw_control) {
|
||||
case TX_BW_CONTROL_OLD_LAYOUT:
|
||||
off = TXQ_FIX_PRIO_CONF(mp->port_num);
|
||||
break;
|
||||
case TX_BW_CONTROL_NEW_LAYOUT:
|
||||
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
|
||||
break;
|
||||
}
|
||||
|
||||
val = rdl(mp, off);
|
||||
val &= ~(1 << txq->index);
|
||||
wrl(mp, off, val);
|
||||
if (off) {
|
||||
val = rdl(mp, off);
|
||||
val &= ~(1 << txq->index);
|
||||
wrl(mp, off, val);
|
||||
|
||||
/*
|
||||
* Configure WRR weight for this queue.
|
||||
*/
|
||||
off = TXQ_BW_WRR_CONF(mp->port_num, txq->index);
|
||||
/*
|
||||
* Configure WRR weight for this queue.
|
||||
*/
|
||||
off = TXQ_BW_WRR_CONF(mp->port_num, txq->index);
|
||||
|
||||
val = rdl(mp, off);
|
||||
val = (val & ~0xff) | (weight & 0xff);
|
||||
wrl(mp, off, val);
|
||||
val = rdl(mp, off);
|
||||
val = (val & ~0xff) | (weight & 0xff);
|
||||
wrl(mp, off, val);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -2288,14 +2309,20 @@ static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
|
||||
msp->extended_rx_coal_limit = 0;
|
||||
|
||||
/*
|
||||
* Check whether the TX rate control registers are in the
|
||||
* old or the new place.
|
||||
* Check whether the MAC supports TX rate control, and if
|
||||
* yes, whether its associated registers are in the old or
|
||||
* the new place.
|
||||
*/
|
||||
writel(1, msp->base + TX_BW_MTU_MOVED(0));
|
||||
if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1)
|
||||
msp->tx_bw_control_moved = 1;
|
||||
else
|
||||
msp->tx_bw_control_moved = 0;
|
||||
if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1) {
|
||||
msp->tx_bw_control = TX_BW_CONTROL_NEW_LAYOUT;
|
||||
} else {
|
||||
writel(7, msp->base + TX_BW_RATE(0));
|
||||
if (readl(msp->base + TX_BW_RATE(0)) & 7)
|
||||
msp->tx_bw_control = TX_BW_CONTROL_OLD_LAYOUT;
|
||||
else
|
||||
msp->tx_bw_control = TX_BW_CONTROL_ABSENT;
|
||||
}
|
||||
}
|
||||
|
||||
static int mv643xx_eth_shared_probe(struct platform_device *pdev)
|
||||
|
Loading…
Reference in New Issue
Block a user