AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

V4L/DVB (6037): Updated GenPix USB driver

Browse Source 
There are now 4 different versions of the GENPIX USB adapter.  The 
newest 'Skywalker' models are fully self-contained, and need no 
additional hardware to be used.  A very reliable DVB-S card even without 
using any of the alternate modulatations (which this kernel module does 
not currently support)

The following patch adds support for all 4 versions of the genpix
adapter (www.genpix-electronics.com).

Signed-off-by: Alan Nisota alannisota@gmail.com
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Alan Nisota 2007-08-18 17:52:35 -03:00 committed by Mauro Carvalho Chehab
parent fa40b2237a
commit 458b634cd8
4 changed files with 152 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/media/dvb/dvb-usb/dvb-usb-ids.h
View File

@ -158,8 +158,11 @@
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
#define USB_PID_GENPIX_8PSK_COLD 0x0200
#define USB_PID_GENPIX_8PSK_WARM 0x0201
#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200
#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201
#define USB_PID_GENPIX_8PSK_REV_2 0x0202
#define USB_PID_GENPIX_SKYWALKER_1 0x0203
#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204
#define USB_PID_SIGMATEK_DVB_110 0x6610
#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513
#define USB_PID_OPERA1_COLD 0x2830

84
drivers/media/dvb/dvb-usb/gp8psk-fe.c
View File

@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@ -17,27 +18,39 @@
struct gp8psk_fe_state {
struct dvb_frontend fe;
struct dvb_usb_device *d;
u8 lock;
u16 snr;
unsigned long next_snr_check;
unsigned long next_status_check;
unsigned long status_check_interval;
};
static int gp8psk_fe_update_status(struct gp8psk_fe_state *st)
{
u8 buf[6];
if (time_after(jiffies,st->next_status_check)) {
gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1);
gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6);
st->snr = (buf[1]) << 8 | buf[0];
st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
}
return 0;
}
static int gp8psk_fe_read_status(struct dvb_frontend* fe, fe_status_t *status)
{
struct gp8psk_fe_state *st = fe->demodulator_priv;
u8 lock;
gp8psk_fe_update_status(st);
if (gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0, 0, &lock,1))
return -EINVAL;
if (lock)
if (st->lock)
*status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER;
else
*status = 0;
if (*status & FE_HAS_LOCK)
st->status_check_interval = 1000;
else
st->status_check_interval = 100;
return 0;
}
@ -60,33 +73,29 @@ static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc)
static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr)
{
struct gp8psk_fe_state *st = fe->demodulator_priv;
u8 buf[2];
if (time_after(jiffies,st->next_snr_check)) {
gp8psk_usb_in_op(st->d,GET_SIGNAL_STRENGTH,0,0,buf,2);
*snr = (int)(buf[1]) << 8 | buf[0];
/* snr is reported in dBu*256 */
/* snr / 38.4 ~= 100% strength */
/* snr * 17 returns 100% strength as 65535 */
if (*snr <= 3855)
*snr = (*snr<<4) + *snr; // snr * 17
else
*snr = 65535;
st->next_snr_check = jiffies + (10*HZ)/1000;
} else {
*snr = st->snr;
}
gp8psk_fe_update_status(st);
/* snr is reported in dBu*256 */
*snr = st->snr;
return 0;
}
static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength)
{
return gp8psk_fe_read_snr(fe, strength);
struct gp8psk_fe_state *st = fe->demodulator_priv;
gp8psk_fe_update_status(st);
/* snr is reported in dBu*256 */
/* snr / 38.4 ~= 100% strength */
/* snr * 17 returns 100% strength as 65535 */
if (st->snr > 0xf00)
*strength = 0xffff;
else
*strength = (st->snr << 4) + st->snr; /* snr*17 */
return 0;
}
static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
{
tune->min_delay_ms = 800;
tune->min_delay_ms = 200;
return 0;
}
@ -124,7 +133,9 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend* fe,
gp8psk_usb_out_op(state->d,TUNE_8PSK,0,0,cmd,10);
state->next_snr_check = jiffies;
state->lock = 0;
state->next_status_check = jiffies;
state->status_check_interval = 200;
return 0;
}
@ -190,6 +201,12 @@ static int gp8psk_fe_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t volt
return 0;
}
static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff)
{
struct gp8psk_fe_state* state = fe->demodulator_priv;
return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0);
}
static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd)
{
struct gp8psk_fe_state* state = fe->demodulator_priv;
@ -235,10 +252,10 @@ struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d)
static struct dvb_frontend_ops gp8psk_fe_ops = {
.info = {
.name = "Genpix 8psk-USB DVB-S",
.name = "Genpix 8psk-to-USB2 DVB-S",
.type = FE_QPSK,
.frequency_min = 950000,
.frequency_max = 2150000,
.frequency_min = 800000,
.frequency_max = 2250000,
.frequency_stepsize = 100,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
@ -269,4 +286,5 @@ static struct dvb_frontend_ops gp8psk_fe_ops = {
.set_tone = gp8psk_fe_set_tone,
.set_voltage = gp8psk_fe_set_voltage,
.dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd,
.enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage
};

93
drivers/media/dvb/dvb-usb/gp8psk.c
View File

@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@ -40,7 +41,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8
}
if (ret < 0 || ret != blen) {
warn("usb in operation failed.");
warn("usb in %d operation failed.", req);
ret = -EIO;
} else
ret = 0;
@ -97,10 +98,10 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
goto out_rel_fw;
info("downloaidng bcm4500 firmware from file '%s'",bcm4500_firmware);
info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
ptr = fw->data;
buf = kmalloc(512, GFP_KERNEL | GFP_DMA);
buf = kmalloc(64, GFP_KERNEL | GFP_DMA);
while (ptr[0] != 0xff) {
u16 buflen = ptr[0] + 4;
@ -129,25 +130,34 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
{
u8 status, buf;
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
if (onoff) {
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
if (! (status & 0x01)) /* started */
if (! (status & bm8pskStarted)) { /* started */
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
}
if (! (status & 0x02)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
return EINVAL;
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
return EINVAL;
if (! (status & 0x04)) /* LNB Power */
if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
return EINVAL;
/* Set DVB mode */
if(gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
return -EINVAL;
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
/* Set DVB mode to 1 */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
return EINVAL;
/* Abort possible TS (if previous tune crashed) */
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
return EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
@ -155,11 +165,28 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
}
return 0;
}
int gp8psk_bcm4500_reload(struct dvb_usb_device *d)
{
u8 buf;
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
/* Turn On 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
return -EINVAL;
/* load BCM4500 firmware */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_load_bcm4500fw(d))
return EINVAL;
return 0;
}
static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
{
@ -177,12 +204,22 @@ static struct dvb_usb_device_properties gp8psk_properties;
static int gp8psk_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
int ret;
struct usb_device *udev = interface_to_usbdev(intf);
ret = dvb_usb_device_init(intf,&gp8psk_properties,THIS_MODULE,NULL);
if (ret == 0) {
info("found Genpix USB device pID = %x (hex)",
le16_to_cpu(udev->descriptor.idProduct));
}
return ret;
}
static struct usb_device_id gp8psk_usb_table [] = {
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_COLD) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_WARM) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },
{ 0 },
};
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
@ -213,12 +250,24 @@ static struct dvb_usb_device_properties gp8psk_properties = {
.generic_bulk_ctrl_endpoint = 0x01,
.num_device_descs = 1,
.num_device_descs = 4,
.devices = {
{ .name = "Genpix 8PSK-USB DVB-S USB2.0 receiver",
{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
.cold_ids = { &gp8psk_usb_table[0], NULL },
.warm_ids = { &gp8psk_usb_table[1], NULL },
},
{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
.cold_ids = { NULL },
.warm_ids = { &gp8psk_usb_table[2], NULL },
},
{ .name = "Genpix SkyWalker-1 DVB-S receiver",
.cold_ids = { NULL },
.warm_ids = { &gp8psk_usb_table[3], NULL },
},
{ .name = "Genpix SkyWalker-CW3K DVB-S receiver",
.cold_ids = { NULL },
.warm_ids = { &gp8psk_usb_table[4], NULL },
},
{ NULL },
}
};
@ -253,6 +302,6 @@ module_init(gp8psk_usb_module_init);
module_exit(gp8psk_usb_module_exit);
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
MODULE_DESCRIPTION("Driver for Genpix 8psk-USB DVB-S USB2.0");
MODULE_VERSION("1.0");
MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");
MODULE_VERSION("1.1");
MODULE_LICENSE("GPL");

32
drivers/media/dvb/dvb-usb/gp8psk.h
View File

@ -1,7 +1,8 @@
/* DVB USB compliant Linux driver for the
* - GENPIX 8pks/qpsk USB2.0 DVB-S module
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
*
* Copyright (C) 2006 Alan Nisota (alannisota@gmail.com)
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
*
* Thanks to GENPIX for the sample code used to implement this module.
*
@ -30,21 +31,37 @@ extern int dvb_usb_gp8psk_debug;
#define TH_COMMAND_IN 0xC0
#define TH_COMMAND_OUT 0xC1
/* command bytes */
#define GET_8PSK_CONFIG 0x80
/* gp8psk commands */
#define GET_8PSK_CONFIG 0x80 /* in */
#define SET_8PSK_CONFIG 0x81
#define I2C_WRITE 0x83
#define I2C_READ 0x84
#define ARM_TRANSFER 0x85
#define TUNE_8PSK 0x86
#define GET_SIGNAL_STRENGTH 0x87
#define GET_SIGNAL_STRENGTH 0x87 /* in */
#define LOAD_BCM4500 0x88
#define BOOT_8PSK 0x89
#define START_INTERSIL 0x8A
#define BOOT_8PSK 0x89 /* in */
#define START_INTERSIL 0x8A /* in */
#define SET_LNB_VOLTAGE 0x8B
#define SET_22KHZ_TONE 0x8C
#define SEND_DISEQC_COMMAND 0x8D
#define SET_DVB_MODE 0x8E
#define SET_DN_SWITCH 0x8F
#define GET_SIGNAL_LOCK 0x90
#define GET_SIGNAL_LOCK 0x90 /* in */
#define GET_SERIAL_NUMBER 0x93 /* in */
#define USE_EXTRA_VOLT 0x94
#define CW3K_INIT 0x9d
/* PSK_configuration bits */
#define bm8pskStarted 0x01
#define bm8pskFW_Loaded 0x02
#define bmIntersilOn 0x04
#define bmDVBmode 0x08
#define bm22kHz 0x10
#define bmSEL18V 0x20
#define bmDCtuned 0x40
#define bmArmed 0x80
/* Satellite modulation modes */
#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */
@ -75,5 +92,6 @@ extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
u16 index, u8 *b, int blen);
extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d);
#endif